ATTENTION THIS PRODUCT IS MADE TO ORDER. SHIPPING TAKES PLACE WITHIN 10 WORKING DAYS FROM THE DATE OF PURCHASE SAUNIER DUVAL SPAZIOZERO 4 CONDENSING 26 SB ONLY HEATING COMPLETE WITH FUME KIT - NEW ERP Model: ErP efficiency class in heating: A Type: Heating only Combustion chamber: sealed Heating Nominal power P min/max heating 80/60 °C: kW 5.5/26 Sanitary Rated power min/max (60 °C): kW 5.5/26 Specific flow rate (∆T=25 K): l/min 15 Electrical characteristics Total absorbed electric power: W 168 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 1140 x 550 x 246 mm CNG code (G20) - 10017159 METHANE version General characteristics SPAZIOZERO 4 CONDENSING The Spaziozero Condensing condensing boiler meets the needs of modern homes in terms of space and consumption. Only one 26 kW model is available. Characteristics Energy classification **** (92/42/EEC) with yields up to 108.3% Sanitary comfort *** (EN 13203-1), thanks to the exclusive Aquaspeed® technology with sanitary stainless steel plate exchanger with pre-heating function (Kombi models) Continuous domestic hot water (DHW) production up to 15 l/min (Kombi models) Solar Easy: prepared for integration with solar systems Low NOx emissions - class 5 (EN 483) Total premix burner and primary heat exchanger in anti-corrosion stainless steel High efficiency and modulating circulator Heating and DHW antifreeze protection -5 °C (standard) and -15°C with optional antifreeze kit Standard weekly timer control: user interface with remote control Automatic filling of the system • Only 24 cm deep for minimum encumbrance on balconies Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less

ATTENTION OFFER VALID UNTIL STOCKS LAST Technical features Model: Prime 26 Product code : A7715732 Typology: Condensation Installation: Recommended for indoors Power supply: methane or LPG Energy efficiency Energy class in heating: A Energy class in DHW production: A Load profile: XL Warm-up performance Heating nominal heat input: 20.6 kW Reduced thermal input: 4.9 kW Nominal thermal power Pnominal: 20 kW Useful thermal power at thermal power. name and high temp. regime* P4: 20 kW Useful thermal power at 30% pot. term. name and low temp. regime** P: 6.7 kW Heating circuit water temperature adjustment: 25/80 °C Minimum heating circuit water pressure: 0.5 bar Maximum heating circuit water pressure: 3 bar ACS production performance Sanitary nominal heat input: 26.7 kW Sanitary nominal thermal power: 26 kW Expansion/pre-charge vessel capacity: 7/0.8 l/bar Sanitary water temperature adjustment: 35-60 °C Specific flow rate according to EN 13203-1: 12.4 l/min Sanitary water production ∆T 25°C: 14.9 l/min Minimum domestic water flow rate: 2 I/min DHW circuit minimum dynamic pressure: 0.15 bar DHW circuit maximum water pressure: 8 bar Yield Seasonal space heating energy efficiency ŋs: 93 % Useful efficiency at nominal heat output high temperature regime: 88 % Useful efficiency at 30% nominal heat output and low temperature regime: 97.8% Useful efficiency at average temperature 70 °C: 97.8% Useful efficiency at 30% at return temperature 30 °C: 108.6% Intermediate useful efficiency at medium temperature: 70 °C % Minimum operating temperature: -5°C Degree of protection: IPX5D Emissions of nitrogen oxides NOx: 38 mg/kWh NOx class : 5 Electric power: 84W Sound power level: 48 dB(A) Dimensions and weight Dimensions (HxWxD): 700x395x279 mm Weight: 26Kg Baxi PRIME condensing boiler The Baxi Prime condensing boiler was designed with the principle of facilitating the replacement of old conventional boilers without excessive work, offering very high performance while offering maximum comfort, complying with the requirements of the Ecodesign and Labeling Directives. Ideal for the interior as it has ultra-compact dimensions and takes up minimal space, it matches any decor. Having the same distance between centers of the hydraulic connections of the conventional BAXI boilers to be replaced and the installation is extremely facilitated, and also the frontal access to the electrical connection allows to speed up the connection times. Furthermore, it also offers a simple connection to collective flues having an integrated flue gas non-return valve (clapet valve), in compliance with the new 7129-3:2015 regulation which gives the possibility of connecting to a collective flue in positive pressure only appliances declared suitable by the manufacturer for this application and equipped with a non-return device (clapet), designed to prevent the combustion products from flowing through connected and temporarily switched off appliances. Advantages Easy to use thanks to the control panel equipped with knobs Backlit LCD display Connection to rigid and flexible Ø 50 mm exhaust pipe: solutions for flue refurbishment; Easy installation with ultra-compact size Ideal for replacing conventional boilers thanks to the central flue gas outlet Greater efficiency and silence with 1:5 modulation range Dedicated app for smartphones and tablets for remote boiler control Arrangement for combination with the Baxi integrated solar system Smoke exhaust kit and fittings Boilers running on methane that can be converted to LPG and propane by means of a specific regulation (conversion kit not necessary) Connection to pressurized collective flues Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER SAUNIER DUVAL MICRA 4 CONDENSING 26 SB METHANE ONLY HEATING COMPLETE WITH FUME KIT - NEW ERP Technical features Model: ErP efficiency class in heating: A Sanitary load profile: XL Type: Heating only Combustion chamber: sealed Domestic hot water production technology: Via remote boiler Heating Nominal power P min/max heating 80/60 °C: kW 6.3/26.5 Partial load efficiency 30% 40/30 °C %: 108.5 Sanitary Rated power min/max (60 °C): kW 6/30 Min/max DHW temperature: 45/60 °C Electrical characteristics Total absorbed electric power: W 70 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 700 x 390 x 280 mm CNG code (G20) - 10015676 METHANE version MICRA 4 CONDENSING The Micra 3 Condensing condensing boilers, ecological and performing, meet the highest standards in terms of efficiency and comfort, thanks to the exclusive Aquaspeed® technology for the production of domestic hot water. The range includes two combined models of 25 and 30 kW and 3 heating only models of 12, 26 and 30 kW. Characteristics Energy classification 4 stars **** (92/42/EEC) with yields up to 109.2%; Sanitary comfort 3 stars ***(EN 13203-1), thanks to the Aquaspeed® system which guarantees the immediate delivery of domestic hot water at the desired temperature and the sanitary stainless steel plate exchanger with pre-heating function (Kombi models) The control panel on the boiler, with backlit liquid crystal display and negative contrast, makes adjusting Micra 4 Condensing extremely easy and immediate: with a few simple gestures it is possible to adjust the temperatures of the heating and domestic hot water, for any need . Solar Easy: all models in the Micra 4 Condensing range can be combined with solar systems, thanks to special kits. The small dimensions make all Micra 4 Condensing models perfect both for new systems and for replacement in existing systems. Continuous domestic hot water production (DHW) up to 18 l/min (Kombi models) • Low NOx emissions - class 5 (EN 483) Total premix burner and primary exchanger in anti-corrosion Aluminium-Silicon alloy High efficiency and modulating circulator Heating system antifreeze function Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

OFFER VALID UNTIL STOCKS LAST BUILT-IN BOX TO BE PURCHASED SEPARATELY Technical features Model : ECONCEPT IN ST 25 Product code : 0M7Y4IAA Maximum heat input in heating mode: 25.2 kW Maximum heat output in sanitary mode: 27.0 kW Efficiency (50-30°C) Pmax % 105.4 NOx emissions class: 5 Heating maximum operating temperature: 95°C Heating working pressure: 3 bar Heating expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 1100x700x245 mm Weight : 42.0 Kg MAXIMUM COMFORT IN HEATING AND DOMESTIC HOT WATER DELIVERY ECONCEPT ST/ IN ST are the products with which FERROLI intends to satisfy the new and more selective limits on energy consumption imposed by recent regulations, while still providing maximum comfort in space heating and in the supply of domestic hot water ECONCEPT ST The ECONCEPT ST range has been designed by drawing on the most advanced knowledge available today. The combustion and exchange group makes use of condensing technology while for the production of domestic hot water a dynamic stratification boiler has been adopted, capable of satisfying several users in a constant and continuous manner. The generator is of the sealed chamber and forced draught type. Thanks to a pre-mixed air/gas supply system and the inverted micro-flame ceramic burner, it falls within the 5th class for NOx emissions. The efficiency of ECONCEPT ST is the best in its category. It is in fact certified with 4 stars according to the 92/42 EEC Directive concerning energy classification. The built-in model ECONCEPT IN ST has been designed to offer a solution to space problems. The compactness of the collection allows a wide choice of solutions for installation both inside and outside the home, in partially protected places. The built-in solution is offered in a single 25 kW size and with the same DHW storage tank as the wall-mounted models. ANTI-LEGIONELLA FUNCTION Legionella is a typical form of water contamination caused by bacteria that are particularly harmful to health; they can be shot down bringing the water temperature to a value higher than 60°C. It is for this reason that ECONCEPT ST / IN ST, at least once a week, they heat the DHW storage water up to 65°C regardless of the value set with the thermostat. OPERATION IN SLIDING TEMPERATURE With the installation of the "external probe" kit it is possible to operate the boiler in sliding temperature. This means that without acting on the keys of regulation of the system temperature, the boiler will self-regulate according to the variations in external temperatures. This results in a energy saving while ensuring maximum comfort for the user. ANTIFREEZE FUNCTION Even in stand-by mode (provided with electricity and gas supplies), i.e. in the absence of a request for heat, if ECONCEPT ST / IN ST detects a water temperature of 5°C, activates the anti-freeze protection by igniting the burner at minimum power, in order to avoid damage due to freezing. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

HERMANN SAUNIER DUVAL SPAZIO 4 CONDENSING 26 SB METHANE BOILER ONLY HEATING COMPLETE WITH FUME KIT - NEW ERP Technical features Model: ErP efficiency class in heating: A Type: Heating only Combustion chamber: sealed Domestic hot water production technology: Via remote boiler Heating Nominal power P min/max heating 80/60 °C: kW 6.3/26.5 Partial load efficiency 30% 40/30 °C %: 108.3 Sanitary Rated power min/max (60 °C): kW 5.8/27.2 Min/max DHW temperature: 45/60 °C Electrical characteristics Total absorbed electric power: W 94 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 850 x 520 x 240 mm CNG code (G20) - 10017161 METHANE version SPACE 4 CONDENSING The ecological and high-performance Spazio 4 Condensing boilers meet the highest standards in terms of efficiency and comfort, thanks to the exclusive Aquaspeed® technology for the production of domestic hot water. The range includes a 26 kW combined model and a 26 kW heating only model. It stands out for the optimization of spaces, thanks to the external installation, and for the containment of energy consumption. Characteristics Energy classification 4 stars **** (92/42/EEC) with yields up to 109.2%; Sanitary comfort 3 stars *** (EN 13203-1), thanks to the Aquaspeed® system which guarantees the immediate delivery of domestic hot water at the desired temperature. The boiler is installed outside, and is controlled completely and comfortably from inside thanks to the standard remote timer control: the user is not required to perform any intervention directly on the boiler Solar Easy: all models in the range can be combined with solar systems, thanks to special kits. The compact size (only 24cm deep) minimizes clutter on balconies Continuous domestic hot water (DHW) production up to 15 l/min (Kombi models) Low NOx emissions - class 5 (EN 483) Total premix burner and primary heat exchanger in anti-corrosion stainless steel High efficiency and modulating circulator Heating and DHW antifreeze protection -5 °C (standard) and -15°C with optional antifreeze kit Standard weekly timer control: user interface with remote control Automatic filling of the system Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB IN THE ABSENCE OF THIS PRODUCT, THE NEW MODEL WILL BE SUPPLIED : VICTRIX ZEUS 25! IMMERGAS VICTRIX ZEUS 26 KW LPG CONDENSING BOILER WITH BOILER - COMPLETE WITH FUME EXHAUST KIT - ERP Technical features Model: Wall mounted condensing boiler with 45 liter Boiler; Energy class in heating: A; Sanitary energy class: A; Sanitary load profile: XL; Heating power: 23.6 kW; DHW power: 26.0 kW; Hot water production (∆t 30 °C) l/min: 15.6  Nominal Current: 0.78A; Electrical insulation degree IP X5D; Heating performance: Nominal system expansion vessel capacity (min./max.): 8.0/5.8 L; Head available with flow rate 1000 l/h kPa (m wc) 31.0 (3.16); Healthcare services: Useful thermal power for hot water production (kcal/h) 32.0 (27,520) kW; DHW temperature °C 30 - 60: DHW pressure (min./max) 0.3/10 bar: Min. domestic hot water withdrawal 1.5 litres/min; Power supply: LPG. Benefits and functions: It is possible to take advantage of the tax deductions in force; Low consumption, and can be combined as an optional with thermoregulators, which improve comfort and increase energy savings; 45 l kettle; Eco-compatible technology: in compliance with the ErP and ELD European Directives, it allows to achieve high energy efficiency classes in heating and hot water production; Ecological class 5: reduced emissions of nitrogen oxides. General characteristics Immergas boiler, easy to install in any environment and compatible with existing fittings, designed to respect the environment while enjoying maximum comfort with low energy consumption given its low consumption circulator. Equipped with a 45 liter stainless steel boiler which allows excellent thermoregulation, guaranteeing very high performance in terms of comfort. The Zeus boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Dimensions (HxWxD): 890x580x380mm; Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

IMMERGAS VICTRIX ZEUS SUPERIOR 26 KW METHANE CONDENSING BOILER WITH BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features Healthcare services: Useful thermal power for hot water production (kcal/h) 25.8 (22188) kW; DHW temperature °C 20 - 60: Sanitary pressure 2.5 bar: Withdrawal in continuous service (∆t 30°C) litres/min 13.1; Specific flow rate x 10 min. (∆t 30°C) litres/min 16.0; Boiler losses kW 0.174; Nominal expansion vessel capacity liters 2.0 (1.2) Power supply: METHANE Model: Wall mounted condensing boiler with 45 liter Boiler; Energy class in heating: A; Sanitary energy class: A; Sanitary load profile: XL; Heating power: 23.9 kW; DHW power: 25.8 kW; Hot water production (∆t 30 °C) l/min: 16.0 Nominal Current: 0.64A; Electrical insulation degree IP X5D; Heating performance: Nominal system expansion vessel capacity (min./max.): 10.0/7.1 L; Head available with flow rate 1000 l/h kPa (m wc) 26 (2.65); Benefits and functions: Display: backlit liquid crystal, provides the main operating information; It is possible to take advantage of the tax deductions in force; Low consumption, and can be combined as an optional with thermoregulators, which improve comfort and increase energy savings; 45 l kettle; Eco-compatible technology: in compliance with the ErP and ELD European Directives, it allows to achieve high energy efficiency classes in heating and hot water production; Ecological class 5: reduced emissions of nitrogen oxides. General characteristics Immergas boiler, easy to install in any environment and compatible with existing fittings and whirlpool tubs, designed to respect the environment while enjoying maximum comfort with low energy consumption given its low consumption circulator. Equipped with a 54-litre boiler made of stainless steel to be unalterable over time with minimal heat loss so as to resist even outdoors. The wide flange optimizes cleaning and maintenance operations, which allows excellent thermoregulation, guaranteeing very high performance in terms of comfort. Inside the boiler, in turn, there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange. The Zeus boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Dimensions (HxWxD): 900x600x460cm; Warranty The guarantee on this article is 24 months from the date of purchase.

Read more less

Technical features Model: EVOlution Prime 26 Product code : A7715732 Typology: Condensation Installation: Recommended for replacing conventional boilers Power supply: methane or LPG Energy efficiency Energy efficiency class in heating: A DHW energy efficiency class: A Load profile : XL Performance DHW nominal heat input: 26.7 kW Nominal heating heat input: 20.6 kW Useful heat output at 30% rated heat output and low temperature regime: ** P1 6.7 kW Emissions of nitrogen oxides NOx : 38 mg/kWh Minimum operating temperature : -5°C Heating expansion vessel capacity: 8 litres Heating circuit water temperature adjustment: 25° ~ 80°C Sanitary water temperature adjustment: 35° ~ 60°C Sanitary water production ΔT 25°C : 13.8 l/min DHW circuit minimum water flow rate: 2 l/min Minimum heating circuit water pressure: 0.5 bar Degree of protection : IPX5D Dimensions Dimensions (HxWxD): 700x395x279 mm Weight : 26.0 Kg EVOlution PRIME Wall mounted condensing gas boilers ideal for replacing conventional boilers The new range of EVOlution PRIME condensing boilers has been equipped with an innovative Baxi patented exchanger. Single Ø 28 mm self-cleaning stainless steel coil, with wide passages. Significant reduction of load losses Greater thermal efficiency Reduction of any deposits and therefore less risk of clogging Ease of maintenance The range of EVOlution PRIME condensing boilers is divided into three models, 26 and 30 kW for heating and instantaneous domestic hot water production: the 26 Mago model is equipped with the Baxi Mago SERIES, while it remains an accessory for the other two models. EVOlution PRIME has been designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling regulation (EU Regulation 2017/1369) requires the labeling of products according to a decreasing energy scale that goes from A++ to G and which will pass from A+++ to F from 09/26/2019. The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created to allow the final consumer, by providing true and comparable data, to make informed choices by targeting high-efficiency products. The advantages of the EVOlution PRIME condensing boiler Easy to install The ultra-compact dimensions 700x395x279 mm and the weight of just 26 kg reduce installation time. The EVOlution PRIME has the same center distances of the hydraulic connections of the conventional BAXI boilers to be replaced. Front access to the electrical connection also speeds up connection times. Lower energy consumption Thanks to the condensing technology, the high efficiency pump and the series of modulating room thermostats available as an accessory. Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue outlet and the separate adjustable outlet supplied as standard. The coaxial exhaust Ø 60/100 is available as an accessory that can be combined with a pipe extension and a 90° bend diameter 60/100 (adjustable by 360°).Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue exhaust and the separate adjustable exhaust supplied as standard. The Ø 60/100 coaxial outlet is available as an accessory that can be combined with a pipe extension and a 60/100 diameter 90° bend (360° adjustable). The lower closure kit allows the boiler to adapt to any environment, reducing the visual impact and inserting itself in all the replacement installation contexts. The spacer frame allows the boiler to be moved away from the wall by 40 mm, allowing the passage of the pipes in the rear part of the back panel. This accessory facilitates the replacement of the boiler by eliminating the masonry work. New Baxi patented exchanger with single coil in stainless steel with large water passage sections 8-litre oversized heating expansion vessel Easy to use thanks to the control panel equipped with knobs and backlit LCD display Easy installation thanks to the ultra-compact dimensions (700x395x279 mm - including knobs) and low weight (26 kg) Easy replacement of conventional boilers thanks to central flue gas outlet Modulation range 1:5 greater efficiency and silence Arrangement for combination with the Baxi integrated solar system Ø 80 double drain STANDARD Connection to rigid and flexible Ø 50 mm exhaust pipe: solution for restoring flues - total length (exhaust + intake) 35 meters Connection to pressurized collective flues Boilers running on methane that can be converted to LPG and propane by means of a specific regulation (conversion kit not necessary) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Baxi condensing boiler Mod. NUOVA PRIME 26 complete with flue gas exhaust kit and Baxi maGO thermostat Wi-Fi included methane or LPG Model: Prime 26; Typology: Condensation; Installation: Recommended for indoors; Heating energy class ErP: A; Energy class in DHW production ErP: A; Load profile: XL; Power supply: Methane or Natural Gas (G20/G21); Boilers running on methane which can be converted to LPG and propane air by means of a specific regulation (conversion kit not necessary) Performances : DHW nominal heat input kW 26.7 Heating nominal heat input kW 20.6 Sanitary nominal thermal power kW 26 Seasonal space heating energy efficiency ŋs % 93 Emissions of nitrogen oxides NOx mg/kWh 38 Minimum operating temperature °C -5 Heating expansion vessel capacity l 7 Heating circuit water temperature adjustment °C 25-80 DHW circuit minimum water flow rate l/min 2 Minimum heating circuit water pressure 0.5 bar DHW circuit maximum water pressure bar 8 Dimensions: Dimensions (hxlxp) mm 700x395x279 Type of Gas Methane/LPG/Propaned air Boilers running on methane which can be converted to LPG and propane air by means of a specific regulation (conversion kit not necessary) NEW PRIME Ideal for replacing conventional boilers. The range of Prime condensing boilers is divided into two models, 26 and 30 kW for heating and instantaneous domestic hot water production. Prime has been designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling regulation (EU Regulation 2017/1369) requires the labeling of products according to a decreasing energy scale that goes from A++ to G and which will pass from A+++ to F from 09/26/2019. The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created to allow the final consumer, by providing true and comparable data, to make informed choices by targeting high-efficiency products. Prime 26 Mago: the advantages of Prime with the STANDARD Baxi Mago The Prime 26 Mago boiler is STANDARD equipped with the Baxi Mago modulating chronothermostat with integrated Wi-Fi designed to simplify the life of installers, service centers and end users, as it allows you to manage home comfort directly from an App, via the Wifi. By downloading the dedicated App on your smartphone or tablet, it will be possible to connect to the Baxi Mago to control the temperature, manage programming, view the consumption graph, read any error messages, set the holiday mode, etc. An innovative tool with a unique design, which combines extreme practicality with a modern, captivating aesthetic with a strong appeal. Benefits Baxi Mago it is beautiful to look at and easy to use thanks to the comfortable wheel knob, the backlit screen with large and easy to read numbers; allows automatic and fast programming based on the user's schedules and habits; allows management from different smartphones and tablets, so that each member of the family can interact; follows your programs by creating five different daily scenarios linked to multiple temperature requirements ("daytime", "nighttime", "evening", "away from home" scenario, etc.) it saves you money and you can consult the energy consumption graphs with weekly, monthly or yearly trends The advantages of the Prime condensing boiler Easy to use thanks to the control panel equipped with knobs and backlit LCD display Easy installation thanks to the ultra-compact dimensions (700x395x279 mm - including knobs) and low weight (26 kg) Easy replacement of conventional boilers thanks to central flue gas outlet Modulation range 1:5 greater efficiency and silence Dedicated app for smartphones and tablets for remote control of the boiler (STANDARD for the Prime 26 Mago model; optional accessory for all other models) Arrangement for combination with the Baxi integrated solar system Ø 80 double exhaust as standard Connection to rigid and flexible Ø 50 mm exhaust pipe: solution for restoring flues - for the mod. 26 kw total length (exhaust + intake) 35 metres Connection to pressurized collective flues Boilers running on methane that can be converted to LPG and propane by means of a specific regulation (conversion kit not necessary) hydraulic system Electric three-way diverter valve Pre-mix burner in stainless steel Stainless steel water/fumes exchanger Sanitary heat exchanger in stainless steel Modulating fan with electronic speed variation Automatic by-pass High efficiency circulation pump Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve at 3 bar 7 liter expansion tank Thermoregulation system Arrangement for connection to a zone system Combination with modulating thermostat/chronothermostat Control system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch which blocks the gas in case of water shortage NTC safety probe against fume overheating Temperature control using NTC probes Total antifreeze device Electronic thermometer. Heating circuit pressure gauge Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caldaia Baxi a condensazione NUOVA PRIME 26 completa di Kit Scarico Fumi Metano o Gpl A7697098 Wi-Fi OPTIONAL Modello: Prime 26; Tipologia: Condensazione; Installazione: Consigliata per interni; Classe energetica in riascaldamento ErP: A; Classe energetica in produzione di ACS ErP: A; Profilo di carico: XL; Alimentazione: Metano o Natural Gas (G20/G21); Caldaie funzionanti a metano trasformabili a GPL e ad aria propanata mediante apposita regolazione (kit di trasformazione non necessario) Performance : Portata termica nominale sanitario kW 26,7 Portata termica nominale riscaldamento kW 20,6 Potenza termica nominale sanitario kW 26 Efficienza energetica stagionale del riscaldamento d’ambiente ŋs % 93 Emissioni di ossidi di azoto NOx mg/kWh 38 Temperatura minima di funzionamento °C -5 Capacità vaso espansione riscaldamento l 7 Regolazione temperatura acqua circuito riscaldamento °C 25-80 Portata minima acqua circuito sanitario l/min 2 Pressione minima acqua circuito riscaldamento bar 0,5 Pressione massima acqua circuito sanitario bar 8 Dimensioni: Dimensioni (h x l x p) mm 700x395x279 Tipo di Gas Metano/GPL/Aria propanata  Caldaie funzionanti a metano trasformabili a GPL e ad aria propanata mediante apposita regolazione (kit di trasformazione non necessario) NUOVA PRIME Ideale per la sostituzione di caldaie convenzionali. La gamma di caldaie a condensazione Prime si articola in due modelli, 26 e 30 kW per riscaldamento e produzione istantanea acqua calda sanitaria. Prime è stata progettata rispettando i requisiti delle Direttive Ecodesign e Labelling. Il regolamento sull’etichettatura (Regolamento UE 2017/1369) richiede di etichettare i prodotti secondo una scala energetica decrescente che va dalla A++ alla G e che passerà dalla A+++ alla F dal 26/09/2019. La classe energetica, identificata da una lettera, esprime un intervallo di valori di efficienza entro il quale risiede quello espresso dal prodotto in esame. L’etichetta nasce per consentire al consumatore finale, fornendo dati veri e comparabili, di fare scelte consapevoli indirizzandosi su prodotti ad alta efficienza. I vantaggi della caldaia a condensazione Prime Facile utilizzo grazie al pannello di controllo dotato di manopole e display LCD retroilluminato Facile installazione grazie alle dimensioni ultracompatte (700x395x279 mm - incluse manopole) e al peso contenuto (26 kg) Facile sostituzione di caldaie convenzionali grazie allo scarico fumi centrale Campo di modulazione 1:5 maggiore efficienza e silenziosità Predisposizione per abbinamento con il sistema solare integrato Baxi Scarico sdoppiato Ø 80 di serie Allacciamento a tubo di scarico Ø 50 mm rigido e flessibile: soluzione per risanamento canne fumarie - per il mod. 26 kw lunghezza totale (scarico + aspirazione) 35 metri Allacciamento a canne fumarie collettive in pressione Caldaie funzionanti a metano trasformabili a GPL e ad aria propanata mediante apposita regolazione (kit di trasformazione non necessario) Sistema idraulico Valvola deviatrice a tre vie elettrica Bruciatore a premiscelazione in acciaio inox Scambiatore acqua/fumi in acciaio inox Scambiatore sanitario in acciao inox Ventilatore modulante a variazione elettronica di velocità By-pass automatico Pompa di circolazione ad alta efficienza Sistema antibloccaggio pompa e valvola a tre vie che interviene ogni 24 ore Valvola di sicurezza circuito riscaldamento a 3 bar Vaso espansione da 7 litri Sistema di termoregolazione Predisposizione per il collegamento ad un impianto a zone Abbinamento a termostato/cronotermostato modulante Sistema di controllo Termostato di sicurezza contro le sovratemperature dello scambiatore acqua/fumi Pressostato idraulico che blocca il gas in caso di mancanza d’acqua Sonda NTC di sicurezza contro le sovratemperature dei fumi Controllo temperature mediante sonde NTC Dispositivo antigelo totale Termometro elettronico Manometro circuito riscaldamento Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO: LEGGERA AMMACCATURA SULLA PARTE INFERIORE GRAFFIO AL PANNELLO ANTERIORE IMBALLO NON ORIGINALE (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE).   La caldaia verrà fornita a metano , mediante una regolazione potrà essere trasformata per il funzionamento a gpl Caratteristiche Tecniche Modello : ecoTEC Plus VMW 26 CS/1-5 Codice articolo : 0010022020 Alimentazione : Metano o gpl Performance Potenza riscaldamento : 3,0 ~ 25,0 kW Potenza sanitario : 3,0 ~ 26,0 kW Portata prelievo (ΔT = 30K) : 12,6 l/min Classe di efficienza energetica in riscaldamento : A Classe di efficienza energetica in sanitario : A Profilo di carico sanitario : XL Classe NOx : 6 Rendimento alla portata termica nominale a 50/30°C : 103,4% Regolazione temperatura acqua calda sanitaria : 35°C ~ 65°C Temperatura fumi : 35 ~ 85°C Modulazione : 1:9 Vado d'espansione : 10 litri Dati installativi Diametro allacciamento fumi : 60/100 mm Diametro possibili scarichi gas combusti : 60/100 - 80/125 - 80/80 - 60/60 Diametro tubazioni gas : 12,70 mm (1/2") Diametro tubazioni idrauliche : 19,05 mm (G3/4") Dimensioni e peso Dimensioni (AxLxP) : 720x440x348 mm Peso : 34,0 Kg Estensione di garanzia a 7 anni   Caldaia murale a condensazione Vaillant ecoTEC plus VMW Sempre ecoTEC plus ma con una riserva di acqua calda in più La nuova ecoTEC plus VMW è stata rinnovata per raggiungere un’efficienza di livello superiore. Efficienza etas pari al 94% , garantendo sempre il massimo comfort sanitario e offrendo una miglior utilizzabilità al cliente. I modelli della gamma ecoTEC plus VMI presentano un’efficienza etas pari al 94%. Abbinati ad una termoregolazione di classe VI come il vSmart, raggiungono un’efficienza di sistema pari a 98% e quindi la classe energetica ErP in riscaldamento A+ Il più importante sviluppo di questo prodotto è il sistema di rilevamento gas di alimentazione IoniDetect, che in abbinamento alla tecnologia ADA di bilanciamento delle pressioni del gas di alimentazione forniscono il più corretto mix aria/gas necessario al fine di ottenere la miglior combustione possibile. La tecnologia di combustione IoniDetect permette inoltre di utilizzare la caldaia con una miscela di gas contenente fino al 20% di idrogeno. Il campo di modulazione è stato migliorato ed è stato esteso ad un range fino a 1:9. Queste innovazioni apportate al prodotto, sapientemente orchestrate da un’evoluta elettronica, permettono alla caldaia di adattarsi completamente alle reali richieste dell’impianto di riscaldamento e riducendo al minimo i consumi di gas e corrente La caldaia con il suo rinnovato ed esclusivo design piatto è disponibile anche con pacchetti dedicati, forniti del termostato connesso vSMART, in grado di garantire l'utilizzo da remoto tramite App gratuita per fornire la miglior esperienza di utilizzo.La caldaia abbinata ad una termoregolazione di classe VI come vSmart, raggiunge un’efficienza di sistema pari a 98% e quindi la classe energetica ErP in riscaldamento A+ La gamma plus presenta una serie di migliorie che vanno a migliorare l’utilizzo della caldaia e facilitano le operazioni del tecnico: Il nuovo sistema LIN Bus, protocollo di comunicazione interno tra i componenti e la nuova elettronica, per risolvere velocemente i malfunzionamenti componenti, mostrando sul display in tempo reale la soluzione da adottare. Il nuovo blocco termoidraulico rinnovato nel design e migliorato nelle sue performance, sempre in ottica di fornire il miglior prodotto possibile, con la più alta efficienza mai raggiunta prima. La nuova interfaccia utente completamente touch, con i nuovi “messaggi parlanti”, permettono un’interazione più semplice tra la caldaia , il tecnico o l’utente Prima accensione gratuita Vaillant garantisce, attraverso il lavoro dei suoi tecnici, il servizio di prima accensione gratuita su tutte le caldaie murali condensing. Caldaia murale a condensazione ecoTEC plus VMW La soluzione perfetta per riscaldamento e acqua calda sanitaria Nuova funzione Soaping: mai più docce con indesiderati sbalzi di temperatura La tecnologia di combustione IoniDetect permette di utilizzare la caldaia con una miscela di gas contenente fino al 20% di idrogeno Nuovo design e nuova interfaccia touch screen Disponibile pacchetto con vSMART per regolazioni direttamente dalla tua app Elevata modulazione 1:9 Garanzia Prodotto: Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

IMMERGAS VICTRIX SUPERIOR 26 KW CONDENSING COMPLETE WITH KIT FOR METHANE FUME EXHAUST - NEW ERP Characteristics: Class A heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile: XL Useful heating power: 23.6 kW Sanitary useful power: 26 kW Type: INSTANT condensing boiler Dimensions (HxWxD): 835 x 440 x 350 Useful thermal power for hot water production kW (kcal/h) 26.0 (22,360) DHW adjustable temperature °C 30 - 60 DHW circuit minimum dynamic pressure bar 0.3 DHW circuit max pressure bar 10 Min. domestic hot water withdrawal 1.5 litres/min Nominal / (real) system expansion tank capacity liters 8.0 / (5.8) Maximum system operating temperature °C 90 System expansion vessel pre-charge pressure bar 1.0 ELECTRICAL DATA: Power supply V/Hz 230 - 50 Nominal absorption A 0.63 Absorbed power in stand-by W 5.6 Electrical insulation degree IP X5D Immergas Victrix Superior 26 ErP wall mounted condensing boiler The new Immergas Victrix Superior 26 ErP wall-mounted condensing boilers offer performance and services with high standards, the certainty of complying with the operations required by law, annual ordinary maintenance and biennial analysis of the products of combustion, constant security of reliability and savings. The new instantaneous Immergas Victrix Superior 26 ErP condensing boiler offers more hot water, immediately! HYDRAULIC PERFORMANCE With the low energy consumption modulating circulator and the possibility of setting the ∆t on the system, these boilers are ideal on systems equipped with zone and thermostatic valves, to enhance the condensing operation of the appliance, reducing energy consumption. HEALTHCARE COMFORT The Immergas Victrix Superior 26 ErP condensing boilers have obtained the recognition of the highest level of sanitary comfort in accordance with the EN 13203 -1 standard. This marking attributes a value in terms of comfort which is indicated with a minimum of 0 and a maximum of 3, evaluating: domestic hot water waiting times, temperature stability as the flow rate varies, temperature stabilization time itself, etc. Warranty The guarantee on this article is 24 months from the date of purchase.

Read more less