THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Intro VMW 18/24 AS/1-1 Item code : 0010026087 Power supply: methane Performance Heating power : 6.0 ~ 18.3 kW Nominal heat input in DHW : 6.0 ~ 24.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at 30% : 107.8% Domestic hot water production (ΔT = 30K): 11.5 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel pre-charge pressure: 0.75 bar Minimum water pressure: 0.3 bar Total electric power: 90 W Expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 626x400x270 mm Weight : 25.6Kg Warranty extension to 7 years ecoTEC Intro VMW wall-mounted condensing boiler The most compact and lightest, now also for outdoor use The new ecoTEC intro VMW condensing boilers (for heating and domestic hot water production) are available in 24 and 28 kW power ratings, increasing the range of product choices within the consolidated range of Vaillant condensing boilers. In fact, this product gives new users the opportunity to approach the world of condensing boilers offered by Vaillant, without incurring excessive costs for replacing the old boiler. ecoTEC intro maintains the focus on energy saving by mounting a high-efficiency modulating pump that minimizes annual electricity consumption , with a consequent positive impact on bills. Also with regard to gas savings, Vaillant offers the new combustion technology , called fan push, where it is the fan which, thanks to the different levels of pressure exerted on the gas valve, guarantees the right ratio between combustion air and gas. The ecoTEC intro case is simple and essential, the dimensions appear to be extremely small which however do not affect or reduce the quality and efficiency of the product, guaranteed by Vaillant. The front panel introduces an innovative , extremely simple touch screen interface with 6 keys, black background display and 2 white digits with intermittent switching on. An additional e-bus connector has been added to the bottom of the boiler which allows connection to Vaillant temperature control units and thermostats. These wall mounted boilers are very simple to install thanks to their dimensions (62.6cm high, 40cm wide and 27cm deep) and low weight (about 26kg): these features make them ideal whenever replacement is required. All the components that are present in the product comply with the ErP energy efficiency regulations, a guideline also embraced by Vaillant, as a brand sensitive to environmental issues. This is all that the new ecoTEC intro can offer, in addition to a competitive price which does not affect performance. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC wall mounted boiler intro Electricity consumption in standby less than 2W Innovative touch screen display Sanitary comfort even with low flow rates Low installation costs Small size Exchanger in stainless steel Pneumatic combustion system with complete pre-mixing Vertical hydraulic connections 1:4 modulation Instant DHW production 8 liter expansion tank Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON GAS BOILER model CARES X 24 CF METHANE Low NOx OPEN CHAMBER - NEW Product code: 3301313 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency B XL withdrawal profile Technical specifications Internal, installation in branched collective pipe with natural draft Nominal heat input max/min (heating) PCI kW 25.8-11.0 Nominal heat input max/min (sanitary) PCI kW 27-11 Max/min useful heat output (heating) kW 23.2-9.8 Efficiency at nominal heat input PCI: 90.1% Efficiency at 30% of nominal flow rate PCI: 89.9% Max/min heating temperature: 82-35°C DHW max/min temperature: 60-36°C Port. specific in healthcare (10 min. with ΔT=30°C): 11.8 litres/min Quantity of hot water (ΔT=25°C): 14.2 l/min Quantity of hot water (ΔT=35°C): 10.1 l/min Minimum ambient temperature of use: 5°C Supply voltage/frequency V/Hz 230-50 Degree of protection of the electrical system IP X4D Dimensions: mm (HxWxD) 745 x 400 x 315 Power supply: methane or LPG Characteristics Digital multifunction display Continuous modulation high efficiency circulator Predisposition for on-off thermoregulation Predisposition solar systems natural circulation Self-diagnosis system by code Mono-temperature zone management Copper finned primary exchanger Double exchanger technology Integrated minimum pressure switch Cold water inlet and heating return filters Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE. THEREFORE, THE STANDARD TRANSFORMATION KIT WILL BE SUPPLIED. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Ariston CARES S 24 EU condensing boiler complete with methane or low NOx LPG fume exhaust kit 3301637 - NEW Heating energy class A Sanitary energy class A XL load profile Nominal heat input max min heating 20.0/4.7 kW Nominal max min DHW heat input 23.5/4.7 kW Heating temperature max min 82 / 35 °C Quantity of hot water deltaT=25°C 13.2 litres/min Power frequency voltage 230/50 V/Hz Electrical protection degree X5D IP NOx class 6 CARES S The condensing boiler suitable for every need, able to combine great performance and high robustness. Thanks to the stainless steel condensing exchanger, CARES S represents the right balance between comfort and performance. Reduction of energy consumption up to 35% Stainless steel condensing exchanger More robust design thanks to the new metal front panel Better accessibility thanks to the front hydrometer MADE IN ITALY produced entirely in Italy SMALL SIZE small footprint for easy installation SYSTEM MANAGEMENT new communication protocol set up to guarantee complete management of the system. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caldaia a Camera Aperta Ariston HS X 24 CF Low NOx Metano  - NOVITA' Classe di efficienza energetica in riscaldamento C Classe energetica in Sanitario B Profilo di carico XL Portata termica nominale max/min kw 25,8 / 11,0 Potenza termica utile max/min kw 23,2 / 9,8 Portata termica nominale max/min (sanitario) PCI 27/11,0 kW Portata acqua calda a ΔT 25º C 14,2 l/min Basse emissioni di NOx < 56 mg/kWh Tensione di alimentazione 230 V~ (50 Hz) Grado di protezione elettrico IP X4D Dimensioni AxLxP 745x400x315 mm Nuova HS XLa nuova caldaia Ariston HS-X lascia il tradizionale termostato ambiente e può funzionare con sonde di temperatura interne ed esterne. Preparato per la termoregolazione. Queste esclusive periferiche di termoregolazione di Ariston consentono un ulteriore risparmio di gas del 15%, offrendo una maggiore stabilità a temperatura ambiente. Pronta per l'uso con energia solare termica in acqua calda sanitaria. Display multifunzione digitale Circolatore ad alta efficienza a modulazione continua Predisposizione termoregolazione on-off Predisposizione sistemi solari circolazione naturale Sistema di autodiagnosi mediante codice Gestione zone mono-temperatura Scambiatore primario alettato in rame Tecnologia a doppio scambiatore Pressostato di minima integrato Filtri ingresso acqua fredda e ritorno riscaldamento Basse emissioni di NOx < 56 mg/kWh Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENTION ! In case of immediate lack of availability, the product will be ordered and shipped within 10 working days Technical features Model: D2CND024A0AA Heating Efficiency class (55°C) : A Fireplace power (Qn) : 2.9 - 23.5 kW Nominal heating power (80°/60 °C): 2.8 - 22.8 kW Nominal heating power (50ç/30 °C) : 3.1 - 24.0 kW Heating efficiency : Up to 108.7% Modulation range : 1:8 Expansion vessel volume: 8 litres Domestic hot water Efficiency class : A Withdrawal profile : XL Temperature range : 35°C ~ 60°C Withdrawal in continuous service (∆T=30°C): 11.3 l/min Withdrawal in continuous service (∆T=25°C): 13.6 l/min Pressure of the water network: 0.5 ~ 10 Bar Technical data Power supply (V,Hz, Ø) : 220~240/50/1 Electric Power Input: 3.5~86W Water content : 1.31 litres Sound power : 39 dB(A) Sound pressure : 49 dB(A) NOx class : 6 Exhaust gas temperature (G20) : 77° C Electrical protection class : IP X5D Installation data Flue diameter: 60/100 mm Maximum length for flue system DN 60/100 : 12.5 m Maximum length for flue system DN 80/125 : 42.8 m Maximum length for flue system DN 80/80 : 125 m Dimensions and weight Dimensions (HxLxD): 590x400x256 mm Weight : 27Kg Simply Serene Guarantee To guarantee you maximum serenity, DAIKIN has studied "SIMPLY SERENIOUS", an extension of the guarantee up to the 5th year of life of your product, which provides for the subscription of a Scheduled Maintenance Plan with specialized Daikin technicians Ultra-compact Daikin D2C condensing boilers for heating and DHW production Why choose a condensing boiler? Daikin condensing boilers are a good solution for those wishing to replace an existing boiler with a more efficient alternative, saving on costs. Our portfolio includes boilers for every need, from the D2C and Full condens and Full Condens TOP wall-hung boilers, to the GCU boiler with built-in thermal storage, to the A2 floor-standing diesel boiler Thanks to the special Daikin-patented exchanger, the D2CND boiler obtains high specific power and high partialization to guarantee comfort and efficiency in any operating mode and in minimum encumbrance. The D2T version, heating only, integrates a diverter valve and can be connected directly to a storage tank for the production of domestic hot water. Ultra-compact and elegant technology The beautifully compact boiler The new D2C condensing boilers are 100% Daikin design. The ultra-compact dimensions make them suitable for even the smallest apartments, where every centimeter saved is space gained A boiler for every need D2C boilers are available in 3 combi versions 24, 28 and 35 kW for heating and instant domestic hot water production. A wide range of heating-only boilers is also available, the D2T, in 5 sizes, from 12 to 35 kW, which can be combined with a storage tank for the production of domestic hot water. You can install them virtually anywhere thanks to their compact size and minimal installation space required. Thanks to the IPX5D degree of electrical protection and the antifreeze kit, they can also be installed outdoors. Do you want to have your heating system under control even when you are not at home? Pair the Lan Adapter to control via APP ! Efficiency and respect for the environment The combustion system with regulation via Lambda Gx probe automatically adapts to the quality of the gas used, methane or LPG, always guaranteeing clean combustion and minimum polluting emissions . Maximum comfort Thanks to a high modulation ratio, up to 1:8 , the output power is automatically varied to always adapt, instant by instant, to the real need of the house in which it is installed. Endless showers? Domestic hot water will no longer be a problem with the D2C boiler with a DHW flow rate of up to 19 l/min in the 35 kW version Cutting-edge technology combines with an attractive and user-friendly user interface Daikin Eye An elegant luminous eye which, thanks to a multi-chromatic LED, signals the operating status of the appliance. In the event of a fault, the LED turns red and the error code is displayed. The easiest way to interact with your boiler! Daikin Heating Online Controller The heating system is always under control, wherever you are! Thanks to the Daikin Heating Online Controller application you can now control and monitor your boiler from the comfort of your smartphone in a simple and intuitive way Monitor The status of your heating system The ambient temperature in your home Energy consumption graphs. Plan The temperature of your home and the operation of the boiler with up to 6 actions per day for 7 days Vacation mode Check it out The operating mode and the set room temperature The system and the production of domestic hot water By integrating third-party products and services through IFTTT services (if this then that) Changing your old boiler has never been easier! Thanks to its small size and IPX5D degree of protection, Daikin D2C can be installed practically anywhere. Its ultra-compact dimensions make it suitable for even the smallest apartments, where every centimeter saved is space gained and its elegant shapes look good in the kitchen. A distinctive element of the 100% Daikin design is also the Daikin Eye: an elegant luminous eye which, thanks to a multi-chromatic LED, signals the operating status of the appliance. Daikin D2C contains the best of condensing technology. The SCOT combustion regulation system automatically adapts to the quality of the gas used, methane or LPG, always guaranteeing clean combustion and minimum polluting emissions. Dimensions and weight reduced to a minimum are possible thanks to the innovative Daikin patented high specific capacity air/fume exchanger body. Heart of the new D2C boiler, it has been designed to obtain the highest thermal power in the smallest size. Functions Eco Mode Return temperature control to optimize condensation Warm start DHW exchanger already heated and ready for use thanks to the memorization of the habits which allows to anticipate the request for domestic hot water Solar connection If the water entering the boiler has been preheated by the solar system, the burner does not ignite, for optimal integration of the solar source Exclusive initiative for Daikin customers On the occasion of the launch of the new Daikin D2C, starting from 1 March 2017 Daikin is giving away the activation cost of Simply Serene. The offer is valid for all those who will purchase a Daikin boiler of any type and who already own a Daikin mono split or multisplit. All the details on daikin.it. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENTION THE BOILER IS EQUIPPED WITH AUTOMATIC COMBUSTION CONTROL. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Baxi Luna Air 24 kw built-in boiler complete with Fumi-new ErP Methane or LPG exhaust kit Cod. A7736261 Technical features Sanitary nominal thermal power: 24 kW Heating nominal heat input: 20.6 kW Heating rated thermal power 80/60°C: 20 kW Heating rated thermal power 50/30°C: 21.8 kW Reduced thermal power 80/60°C: 3.4 kW Reduced thermal power 50/30°C: 3.7 kW Useful efficiency (pci) PN – average temperature 70°C: 97.7% Nominal efficiency 50/30°C: 105.8% Seasonal space heating energy efficiency class: A Seasonal energy efficiency class of the sanitary fixture: A Water heating - Load profile: XL NOx class 6 according to EN 15502 Emission of nitrogen oxides NOx 15 mg/kWh Degree of protection: IPX5D Primary water/gas coil exchanger in AISI 316L stainless steel Secondary water/water exchanger in oversized stainless steel Electric 3-way diverter valve Modulating fan with electronic speed variation Automatic by-pass on the heating circuit Dimensions (boiler) hxwxd: 770 x 470 x 238 mm Dimensions (case) hxwxd: 1170 x 600 x 240 mm MOON AIR Luna Air is the new range of condensing boilers ideal for outdoor installations. remote digital control panel with LCD display as standard suspended installation in partially protected places open-air suspended installation with cover kit, available as an accessory minimum operating temperature: -15°C antifreeze function and IPX5D protection degree wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control built-in installation: the ultra-compact dimensions of the boiler, 770x470x238 mm, allow it to be installed in the majority of boxes on the market; recessed telescopic fittings kit available as an accessory predisposition for combination with the Baxi integrated solar system connection to Ø50 mm rigid and flexible drain pipe - for mod. 24 kW total length (exhaust+intake) 40 metres: solution for renovating flues and in case of replacement of a natural draft boiler with a condensing boiler With Luna Air it is possible to create three different installations: suspended installation in partially protected places; open-air wall-hung installation with cover kit; recessed installation with containment box Product Guarantee : All products for sale on our site are new and packed. The warranty on this product is 24 months from the date of purchase

Read more less

Immergas VICTRIX TERA 24 V2 low nox methane condensing boiler complete with flue gas exhaust kit General Features Model: VICTRIX TERA 24 V2 Code: 3.032927 Power supply: methane Heating Energy Efficiency Class: A Energy Efficiency Class Sanitary: A Nominal domestic hot water heat output (useful): 28.0 kW Nominal heating heat output (useful): 24.0 kW Technical data sheet (Directive 92/42/EEC method) Burner type: Blown air Power at rated load: 24.0 kW Power at 30% of nominal load: 7.2 kW (at 50/30 °C) Efficiency at nominal load: 106.5 Efficiency at 30% of nominal load: 107.5 (at 80/60 °C) Efficiency at nominal load: 97.8 Efficiency at 30% of nominal load: 96.8 Electrical auxiliaries at rated load: 41 W at medium load: 60 W at zero load: 2 W Operating temperatures Average temperature: 50 °C Return temperature: 40 °C DHW temperature: 55 °C With ACS priority: yes TEST conditions at nominal load Average generator temperature: 70 °C Performance correction factor: 0.2 intermediate load Average generator temperature: 70 °C Performance correction factor: 0.2 with no load Power loss: 54.4W Fraction of losses to the mantle: 0.36 Dimensions Legend: V - Electrical connection G - Gas supply AC - Domestic hot water outlet ACV - Domestic hot water inlet kit solar valve (optional) AF - Sanitary water inlet SC - Condensation drain (internal diameter minimum Ø 13 mm) M - System delivery R - Plant return Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Inoa S 24 Reference : 3310664 EU Certificate Number: 0085CU0394 Type of Installation : C10-C13-C23-C33-C43-C53-C63-C83-C93-B23 Gas Category: I2H Energy Performance Nominal heat output in Heating: 4.7 ~ 20.0 kW Heating Thermal Power 60°/80° C : 4,6 ~ 19,6 kW Thermal Power : 4.9 ~ 21.0 kW Nominal heat output in DHW: 4.7 ~ 23.5 kW DHW thermal power: 4.6 ~ 23.0 kW Combustion efficiency : 98.4% Efficiency at nominal heat input 60°/80° C : 88.2 ~ 98 % Efficiency at nominal heat input 30°/50° C : 94.6 ~ 105 % Efficiency at 30% at 30° C Hi : 108.5 % Idle efficiency 60°/80° C : 87.4 ~ 97.1 % Performance Stars : ★★★★ Class : A Maximum shell heat loss ΔT = 30°C : 0.2% Losses to chimney burner in operation: 1.6% Heating Expansion vessel pre-charge pressure: 1 bar Maximum heating pressure : 3 bar Expansion vessel capacity: 8 l High temperature heating temperature : 35° ~ 82° C Low temperature heating temperature : 20° ~ 45° C Domestic hot water DHW temperature : 36° ~ 60° C Specific flow rate in DHW : 11 l/min Instantaneous quantity of hot water ΔT=25°C : 13.2 l/min Instantaneous quantity of hot water ΔT=35°C : 9.4 l/min Stars Sanitary comfort : ★★★ Minimum withdrawal of hot water: 2 l/min Sanitary water pressure: 0.2 ~ 7 bar Withdrawal profile : XL Emissions Residual head : 100 Pa NOx class : 6 Fume temperature G20 at 60/80 : 54° C CO 2 content: 9.4% Maximum flue gas flow rate: 37 Kg/h Excess air : 21% Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Total absorbed electrical power: 62 W Minimum ambient temperature of use: >0° C Electrical system protection degree: X5D Dimensions and weight Dimensions (HxWxD): 745x400x319 mm Weight : 26Kg Inoa S Compact wall mounted boiler INOA S is the new Chaffoteaux brand condensing boiler, designed to guarantee great performance and high robustness: the primary exchanger in stainless steel and the metal front panel combine efficiency and durability Installation in partially protected places MET/LPG operation with standard kit AP operation with optional kit Compatibility with positive pressure collective flues (C10) Comfort in Heating Primary condensing exchanger in stainless steel. Up to 108% efficiency and 93% seasonal efficiency. 4-star combustion efficiency in compliance with the EN92/42 standard. Modulation range from 20% to 100% of maximum power. Reduced polluting emissions, NOx class 6. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via Ebus 2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones via Expert Control. Ready for Chaffolink connectivity. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars *** Flow rate 13.2 litres/minute with ΔT = 25ºC (24kW) and 16 litres/min with ΔT = 25ºC (29kW). Comfort of use and installation Single-volume structure and metal front panel for greater sturdiness. LCD display and front hydrometer for better accessibility. Front electrical connections. Extremely easy access to components during maintenance (DHW exchanger, hydraulic unit, etc.) Possibility of connection with external probe. Compatible with Expert Control, modulating and on/off accessories. Easier starting: automatic purge function and directly accessible combustion regulation Energy saving and respect for the environment Up to 35% energy savings in combination with a modulating chronothermostat and external probe. 40% reduction in CO 2 emissions Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT BAXI ASSISTANCE IN ADVANCE Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 24.7 Heating nominal heat input kW 20.6 Sanitary nominal thermal power kW 24 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.7% Efficiency at 100% Pn (50-30°C): 105.8% Expansion/pre-charge vessel capacity l/bar 7.5/0.8 Sanitary water temperature adjustment °C 35-60 Boiler capacity 40 l Boiler expansion vessel capacity/pre-charge l/bar 2/2.5 Sanitary water production ∆T 25°C l/min 13.8 Sanitary water production at discharge ∆T 30°C (1) l/30' 385 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (hxlxp): 950x600x466 mm ; 62 kgs Power supply: CNG or LPG Cloud Duo-Tec+ Digital control panel The Duo-tec E range of boilers is equipped with a new digital control panel with an even more backlit LCD display, clearer and simpler to use thanks to dedicated and independent keys for regulating the temperature of the domestic hot water and of the heating. The display allows you to view all the information and set the operating parameters in an intuitive and immediate way. Efficiency and savings Wide modulation range: greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adaptation of the thermal power produced to the power dissipated thus avoiding excessive overheating / cooling of the premises GAC Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values. Advantages: there are no manual interventions – reduced measurements, calibrations with this system, the boiler self-adapts to the quality of the gas (methane) and to the length of the flue gas pipes, keeping the efficiency constant the boiler also constantly regulates itself to maintain the maximum efficiency values, favoring a reduction in gas consumption and generating less pollution thanks to the continuous control of emissions. Fully modulating pump with de-aeration The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs. During the first ignition phase, we recommend activating the automatic de-aeration function. This function eliminates the presence of air in the heating circuit and therefore avoids any blockages of the boiler, overheating of the system, etc. Guidelines in case of replacement of a conventional boiler with a new condensing one There are two main problems that can be encountered: Flues and smoke exhaust duct Condensate drain To overcome the above, Baxi recommends: the use of a Ø50 mm exhaust pipe Baxi has in fact developed a system that allows easy ducting in existing flues (for 24kW models). For condensing boilers, the novelty is brought about by the low temperatures of the fumes which allow the use of specific plastic materials; however, in the presence of existing 316 stainless steel flues, installed correctly and with gaskets suitable for receiving damp fumes, there are no problems and they can easily be reconnected to the new boilers while it is absolutely not compliant with the use of aluminum flues or smoke pipes . In fact, aluminum is a metal that is not resistant to the acid condensates present in the fumes. (*) Each Ø50 mm diameter bend decreases the length of the drain by 4m the use of the condensate drain pump Baxi has designed this kit to collect the condensate produced by condensing boilers for domestic use: the pump allows the creation of condensate drainage systems in the absence of natural drainage near the boiler. The operation of condensing boilers determines the formation of condensate, due to the principle of condensation. This water therefore needs to be disposed of through special drains. If there is no adequate slope and therefore it is not possible to dispose of the condensate by gravity, it is necessary to install a pump that conveys it towards the drains. The pumps used are also equipped with special non-return valves to avoid bacterial contamination due to any stagnation and return of the waste water. The use of buildings avoiding the use of annoying pipes. Characteristics : Wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control Up to 500 l of hot water in 30 minutes (ΔT 30°C) 40 l stainless steel kettle Digital control panel with large backlit LCD display Compatibility with the Baxi Mago (optional accessory) for remote boiler control DHW expansion vessel available as STANDARD (for 33 kW mod.) and as an accessory (for 24 kW mod.) Connection to rigid and flexible Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW total length 40 meters (intake+exhaust) STANDARD installation kit (gas cock / DHW inlet / telescopic fittings) hydraulic system Electric three-way diverter valve Pre-mix burner in stainless steel Flue water exchanger in stainless steel Stainless steel kettle Modulating fan with electronic speed variation Automatic by-pass High efficiency circulation pump with total modulation Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve at 3 bar 8 bar boiler safety valve Sanitary expansion vessel (2 litres) standard for mod. 33 GA VES Sanitary recirculation arrangement Thermoregulation system Standard climate control (with external probe available as an option) Arrangement for connection to a zone system Control system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch which blocks the gas in case of water shortage Safety thermostat against fume overheating Temperature control using NTC probes Anti-legionella function Total antifreeze device Electronic thermometer Heating circuit digital pressure gauge Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Baxi Boiler Open chamber Eco5 BLUE 24 Low NOx LPG Wall-mounted gas boiler with reduced polluting emissions (NOx and CO), instantaneous production of domestic hot water with natural draft and open chamber Installation type: B11BS Nominal heat input: 26.3kW Nominal heat output: 24 kW Reduced thermal power: 10.6 kW Efficiency at 30%: 89.6% Nominal efficiency: 90.3% Seasonal space heating energy efficiency class: C Seasonal energy efficiency class of the sanitary fixture: B Water heating - Load profile: XL NOx class 6 according to EN 15502 Domestic hot water production ∆T 25°C: 13.7 l/min Dimensions HxWxD 730x400x298; 27 kgs NOx class 6 LPG supply Supplied accessories System filling tap; System drain cock; Installation template Conventional low NOx boilers for replacement in branched collective flues The ErP/EcoDesign legislation provides that, by way of derogation, manufacturers can continue to produce and market open-chamber, low NOx boilers, only for installations in domestic contexts, with the restriction of replacement in branched collective flues. Baxi's ranges of conventional B1-type natural draft boilers are precisely designed to meet all installation requirements in branched collective flues. ECO5 Blue NEW Conventional low NOx boilers for replacement in branched collective flues Low NOx emissions: class 6 according to EN 15502 Compact dimensions 730x400x298 mm Control panel with multifunction LCD display Arrangement for combination with the Baxi integrated solar system Product plus Control panel equipped with LCD display, programming and adjustment keys. Climatic regulation function (with optional external probe) integrated in the control panel Continuous electronic flame modulation Electronic ignition with flame ionization control Degree of protection: IPX5D Water cooled low NOx burner Primary water/gas exchanger made of copper pipes inserted in a lamellar coil protected by an anticorrosive alloy Secondary water/water exchanger in stainless steel Electric 3-way diverter valve Automatic by-pass on the heating circuit Pressure gauge on the heating circuit Expansion tank with 6 l capacity, preloaded at 0.5 bar ErP high efficiency circulation pump with built-in deaerator Turbine DHW flowmeter for detecting hot water withdrawal DHW operation with minimum water pressure of 0.15 bar and minimum flow rate of 2 l/min Inspectable filter on the sanitary water inlet Primary circuit safety valve at 3 bar Two heating water temperature adjustment ranges: 30÷45°C and 30÷85°C Sanitary water temperature adjustment range: 35÷60°C Minimum operating temperature: - 5°C Dimensions HxWxD: 73 x 40 x 30cm Control and security system Temperature control using NTC probes Pump post-circulation in the heating and DHW function Safety thermostat against overheating of the primary exchanger Hydraulic pressure switch which blocks the gas in case of water shortage Pump electronic control blocked Pump anti-blocking system and 3-way valve which intervenes every 24 hours Safety thermostat for checking the correct evacuation of fumes Total antifreeze device which intervenes with temperatures below 5°C Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER UNICAL KON M C24 CONDENSING LOW NOX COMPLETE WITH LPG FUME KIT Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power kW 23.6 Seasonal heating energy efficiency ambient ηs 92% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 12.7kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 87% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 4.2kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 96.7% Annual electricity consumption QHE GJ: 40 Heating energy efficiency. of water ηWH: 86% Daily fuel consumption Qfuel : 22.0 kWh Sound power level indoors Lwa dB(A) 51 Annual electricity consumption AEC: 400kWh Domestic hot water specific flow rate (Dt 30 °C): 11.2 l/min DHW production in cont. Dt 25 K (mixed): 13.2 l/min Expansion tank capacity: 8 lt Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345 mm; 36.5kg KONm the latest generation of domestic condensing boilers by Unical, available in the version: instant combo heating only combinable with DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion The details of konm... Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility. Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less

Immergas VICTRIX TERA 24 V2 low nox LPG condensing boiler complete with flue gas exhaust kit General characteristics Model: VICTRIX TERA 24 V2 Power supply: LPG Heating Energy Efficiency Class: A Sanitary Energy Efficiency Class: A Sanitary nominal thermal power (useful): 28.0 kW Heating nominal heat output (useful): 24.0 kW Technical data sheet (Method Directive 92/42/EEC) Burner type: Blown air Power at rated load: 24.0 kW Power at 30% of nominal load: 7.2 kW (at 50/30 °C) Efficiency at nominal load: 106.5 Efficiency at 30% of nominal load: 107.5 (at 80/60 °C) Efficiency at nominal load: 97.8 Efficiency at 30% of nominal load: 96.8 Electric auxiliaries at rated load: 41 W at intermediate load: 60 W at zero load: 2 W Operating temperatures Average temperature: 50°C Return temperature: 40°C DHW temperature: 55°C With DHW priority: yes TEST conditions at nominal load Average temperature of the generator: 70 °C Yield correction factor: 0.2 at intermediate load Average temperature of the generator: 70 °C Yield correction factor: 0.2 at zero load Power lost: 54.4W Mantle loss fraction: 0.36 Dimensions Legend: V - Electrical connection G - Gas supply AC - Domestic hot water outlet ACV - Kit domestic hot water inlet solar valve (optional) AF - Domestic hot water inlet SC - Condensate drain (internal diameter minimum Ø 13 mm) M - System delivery R - System return Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less