AVAILABLE TO ORDER Immergas Victrix Zeus 25 kW Low NOx Condensing Boiler with 45 lt boiler complete with Flue Exhaust Kit cod. 3.028381 Technical features Boiler code 3.028381 Maximum nominal heat input in DHW kW (kcal/h) 25.8 (22,211) Maximum nominal heat input in heating kW (kcal/h) 20.5 (17,663) Minimum nominal heat input kW (kcal/h) 3.6 (3,135) Maximum useful thermal power in domestic hot water kW (kcal/h) 25.0 (21,500) Maximum useful heat output in heating kW (kcal/h) 20.0 (17,200) Minimum useful heat output kW (kcal/h) 3.5 (3,010) Useful thermal efficiency at 100% Pn (80/60 °C) % 97.5 Useful thermal efficiency at 30% of the nominal load. (80/60°C) % 100.2 Specific flow rate in continuous domestic hot water service (∆t 30 °C) l/min 11.9 Specific flow rate ∆t 30 °C (in the first 10 minutes) of domestic hot water l/min 14.6 Nominal heating expansion vessel capacity (total) liters 8.0 (5.8) IPX 5D electrical protection degree NOx class Victrix Zeus 25 VICTRIX ZEUS 25 is the condensing and total premix boiler with stainless steel boiler, compact dimensions and new design, completely renewed . With 25 kW of power, it is designed for new installations, but the identical hydraulic connections compared to the previous models and the standard connection group, favor installers in replacements. In addition, the condensing module with large section stainless steel coil reduces the risk of clogging and the low-consumption circulator allows for considerable savings in electricity. Thanks to the electronic card that modulates the boiler power up to 17%, high yields are obtained with a consequent reduction in gas consumption. VICTRIX ZEUS 25, which can also be installed outdoors in protected places such as under the balcony, can be fed with any type of fuel (methane/LPG or propane air), which is why it is supplied with a single product code. In addition to allowing the fumes to be discharged from the wall in the cases envisaged by Legislative Decree 102 of 4 July 2014, the VICTRIX ZEUS 25 falls within the most ecological class of the European classification (class 6) due to the low emissions of carbon monoxide (CO) and nitrogen (NOx). To make it easier for users to use, the interface with LCD display and knobs offers quick and easy adjustments and settings. VICTRIX ZEUS 25 can be remote controlled by the new DOMINUS app. The app is simple and intuitive, and allows you to control the boiler or view its operation with a tablet, smartphone or laptop. Using the optional Wi-Fi transmitter kit (code 3.026273), to be interposed with a wireless modem/router (not supplied by Immergas), it is possible to communicate from anywhere with the boiler electronic board. 45 LITERS STAINLESS STEEL BOILER The stainless steel guarantees the inalterability of the boiler to the action of the water and the wide flange optimizes cleaning and maintenance operations. Inside the boiler there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange. MULTIPLE WITHDRAWALS OF DOMESTIC HOT WATER The capacity of the stainless steel boiler, combined with the excellent temperature regulation, have made it possible to obtain the *** marking pursuant to EN 13203-1, i.e. maximum sanitary performance, guaranteeing high comfort even with simultaneous water withdrawals domestic hot water. SANITARY EXPANSION VESSEL SERIES APPROVED FOR OUTDOORS Thanks to the new insulation that equips the stainless steel boiler and the standard protection down to -5 °C, the boiler can be installed outdoors in a partially protected place. With an appropriate optional kit it is possible to extend it down to -15 °C (in the presence of electricity and gas). The degree of electrical insulation is IPX5D. PRIMARY EXCHANGER IN STAINLESS STEEL The primary exchanger that equips VICTRIX ZEUS 25 is made with a single-tube exchange coil in stainless steel. The absence of collectors and circuits in parallel guarantees maximum reliability over time: there are no weldings. The single stainless steel spiral without bottlenecks allows for a perfectly balanced hydraulic circuit, considerably reducing pressure drops. The internal section, wide and constant, allows to limit deposits, reducing the risk of clogging in the case of impurities present in the water (for example in the case of replacing boilers on outdated systems). Due to this peculiarity, VICTRIX ZEUS 25 is ideal for replacement . Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

NB: THE CURVE AND THE PIPE FOR THE COAXIAL KIT MUST BE PURCHASED SEPARATELY Momiji 24 kW Rinnai Condensing Boiler Complete with FUme Exhaust Kit with Integrated Wi-Fi Chronothermostat Code REB-KAI2024FF Heating energy class A XL load profile Nominal thermal power kW 20 EN677 efficiency on PCI (80-60°C) % 96.1 Nominal power modulation (80-60°C) Heating kW 6.7 - 19.5 NOx class 6 Maximum electric power absorbed in heating W 97 Electrical power in stand-by W < 3 Supply voltage V/Hz 230 / 50 Degree of protection IPX5D Domestic hot water delivery (ΔT=35°C) l/min 9.6 Domestic hot water delivery (ΔT=25°C) l/min 13.5 Dimensions (H x W x D) (mm)660x440x285 MOMIJGI The warm embrace of autumn MOMIJI are the red maple trees typical of the Orient, whose leaves color autumn red, a season that the Japanese experience as "comfort". Thanks to the mild climate and temperatures that are once again welcoming (no longer the torrid heat of summer, not yet the freezing climate of winter), taking time out is even more pleasant. Enjoying your home, as well as the foliage, gives well-being. Momiji best interprets the combination of traditional systems and condensing technology. In fact, while integrating perfectly with different systems, it is designed to optimize the condensation technology on radiator systems, responding concretely to the needs for savings and eco-sustainability of this type of heating, extremely widespread but often unable to fully exploit the advantages of condensation. The heating is smart Momiji offers the standard Wi-Fi chronothermostat (which can also be installed in a room other than that of the generator) to manage and control the boiler anytime, anywhere, in complete freedom. Consumption reports, weekly programming, modification of settings and management of multiple boilers (such as one's own and that of elderly parents, or the house in the mountains) from the same "My Rinnai" APP, available for Android and iOS smartphones. All this and much more to offer you totally smart management. The integrated climatic probe is a standard of Rinnai heat generators: the internal positioning allows you, who use it and you who install it, to avoid masonry work and electrical connections. Thanks to this sensor, you can forget about regulating the temperature in your home and let the generator take care of everything, intelligently adapting its operation according to the weather, more or less cold. So while the boiler operates in climatic regulation with sliding temperature, you can enjoy a perfect balance between comfort and savings, and no worries. Momiji Comfort has never been easier Easy, everywhere Like the Rinnai Infinity water heaters, the Momiji boilers are also specifically designed to facilitate the installer's work. The device is small, light and compact. It is ready to use and does not need to be configured. The flue system is split Ø80/80 and, thanks to the high prevalence of the fan, it is possible to reach up to 30 equivalent linear metres. Thermal exchange Momiji has a copper heat exchange, with a large passage section: this facilitates integration into existing radiator systems and simplifies cleaning operations. This range of boilers is the perfect solution for often imperfect traditional systems. Can also be installed outdoors Momiji is IPX5D certified and has the standard antifreeze kit up to -20°C. Thanks to these characteristics, it can also be installed outdoors without the need for additional protection Integrated condensate neutraliser The Momiji series features the condensate siphon integrated inside the generator, already added with granulate and immediately ready for use. This allows you to simplify installation, always, even when replacing a traditional high temperature generator. The integrated neutralizer, in fact, allows you to eliminate the acidity of the condensate (acidic pH water produced by the normal operation of the heat generator, corrosive for the pipes) without having to face the costs of purchasing and maintaining an external accessory that performs this function otherwise essential. Product Warranty: The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION POSSIBILITY OF PROPANE SUPPLY THROUGH THE SERVICE CENTER. FOR INFO, CONTACT THE AREA HERMANN ASSISTANCE IN ADVANCE Hermann Saunier Duval THEMA CONDENS 26 kW condensing boiler complete with low NOx flue gas kit - Methane Model: Efficiency class Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating/Sanitary Nominal power Pmin/max heating - 80/60°C kW 5.4 / 26.1 Min/Max Nominal Power (60°C) (kW) DHW 5.1 / 25.5 Continuous flow rate (ΔT = 25K) 15.0 generals Supply gas - Methane Nox class - 5 Electrical protection IPX - 5D Dimensions mm (HxLxP) 740x418x344 THEMA Condens IS Solution for multi-family units Ideal for structures with single flue gas outlet Smoke kit included, non-return valve already installed High sanitary comfort Hot water immediately available thanks to Aquaspeed® technology New design with flat casing and touch-screen user interface Continuous domestic hot water production up to 18 l/min ErP class A+ in combination with MiGo climatic control unit Wall-mounted combined condensing boiler for heating and domestic hot water of multi-family units with single ducting The new Thema Condens IS has a renewed aesthetic with modern and essential lines, with a flat casing and an innovative touch-screen user interface. It is the Hermann Saunier Duval solution designed to replace wall-hung boilers (traditional or condensing) in multi-family complexes where the various boilers discharge into the same flue with a single pressurized ducting system. It is in fact equipped with a dedicated flue kit (included in the supply) for direct connection to a single flue system. The boiler has C(10)3 and C(12)3 certification which makes it possible to install it in multi-family housing structures even where there are boilers from different manufacturers. The high sanitary comfort is guaranteed by the pre-heating function with stainless steel plate sanitary exchanger and by the Aquaspeed® technology for the immediate delivery of hot water. Thema Condens IS is available in two power sizes: the new 26 kW and the 31 kW with methane fuel, but with the possibility of regulation for propane fuel. Standard smoke kit A version dedicated to multi-family systems with a single pressurized ducting system within the same flue, Thema Condens IS is equipped with a standard flue kit that facilitates installation, presenting itself as the optimal solution in case of replacement in the aforementioned structures . The supplied kit consists of an 80/125 mm adapter with an 87° bend and a rigid connection section for connection directly to the main flue outlet of the multi-family complex. The non-return valve is already installed in the boiler. The safety systems present in the kit guarantee maximum reliability of the entire system, safeguarding against the risk of undesired evacuation of exhausted fumes - also coming from other boilers in the housing unit - inside the installation room of the boiler itself, in full compliance with the Italian standard UNI 7129 part 3. Thema Condens IS stands out in its reference market boasting two additional certifications C(10)3 and C(12)3 - thanks to which it is possible to install a condensing boiler inside single pressurized flue systems manufactured by third parties which already include other boilers from different manufacturers, without in any way affecting the level of performance of the system in terms of efficiency and yields in heating and domestic hot water production. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AVAILABLE TO ORDER Hermann Saunier Duval THEMA CONDENS 25 SB heating only condensing boiler complete with low NOx methane or LPG fume kit Model: Efficiency class Heating efficiency class A Heating Fireplace flow rate Qmin/max - 80/60 °C 2.5 - 25.5 generals Product code 0010025115 Dimensions HxWxD 740x418x344 Possibility of propane supply through simple regulation THEMA Condens SB Wall-mounted combined condensing boiler for heating and domestic hot water in single-family units The new Thema Condens has a renewed aesthetic with modern and essential lines, flat casing to facilitate installation (dimensions and hydraulic connections unchanged compared to the previous version) and a new touch-screen user interface. The boiler has been designed as the ideal solution for single-family homes in case of replacement of traditional wall-mounted or condensing boilers that work on high-temperature or low-temperature systems. The high level of sanitary comfort is guaranteed by the exclusive Aquaspeed® technology which is able to offer the user immediate delivery of hot water at the desired temperature, without long waiting times and costly waste of water. The pre-heating of the primary circuit, and therefore also of the secondary stainless steel plate exchanger, in fact ensures an instantaneous response from the boiler to any sudden request for domestic hot water. Thema Condens is available in three power sizes: the 25 and 30 kW versions are joined by the new 35 kW size, all with methane fuel but convertible to propane via simple electronic regulation, without the need for any conversion kit. The range is also enriched with a new solution: the 25, 30 and 35 kW SB version (heating only) , which can be combined with any Hermann Saunier Duval boiler. Even the new SB boilers are methane powered, but electronically convertible to commercial propane. Ideal for installation in single-family homes New FlameFit® combustion system Hot water immediately available thanks to Aquaspeed® technology New design with flat casing and touch-screen user interface New heating only versions of 25, 30 and 35 kW ErP class A+ in combination with MiGo climatic control unit FlameFit® technology: maximum safety, low consumption, reduced emissions. The innovative FlameFit® combustion technology with which the version for single-family units is equipped allows for autonomous adaptability of the boiler to the different types and qualities of gas, always guaranteeing optimized and completely safe operation. In fact, the flame control electrode detects the changing characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting boiler operation to the actual needs of the user. This therefore leads to high performance with a reduced quantity of gas, saving energy and consequently limiting consumption and polluting emissions. The FlameFit® technology makes Thema Condens ready for immediate operation with any type of future gas, without the need for any conversion kit. Touch screen user interface The interface of the new Thema Condens features a modern digital touch display and was developed to facilitate boiler management by the user. The symbology of the various keys allows a quick understanding of the functions of the appliance and of the parameter setting methods according to one's comfort needs. Excellent visibility of parameters and icons Delivery temperature regulation Intuitive navigation Simplified programming All parameters under control Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

UNICAL X 24 C condensing boiler Low NOx 6 Complete with methane flue exhaust kit in stainless steel - ErP Technical data according to dir. ErP C24 Minimum/nominal useful power in condensing kW 5 ÷ 25.2 Seasonal heating energy efficiency ambient ηs % 91 Seasonal EFFICIENCY CLASS for heating Useful heat output in high temp. (Tr 60°C / tm 80°C) P4 kW 23.2 Efficiency at nominal thermal power in high temperature regime (Tr 60°C / Tm 80°C) η4 % 87.0 Useful power at 30% of rated thermal power in low temperature regime (Tr 30°C) P1 kW 7.7 Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30°C) η1 % 96.1 Emissions of nitrogen oxides ref. PCS NO x mg/kWh 22 Declared load profile XL Sanitary seasonal EFFICIENCY CLASS Produc. DHW cont. Dt 25 K (mixed) l/min 13.2 Expansion vessel capacity l 10 Max condensate production kg/h 3.86 Heating circuit pressure (min/max) 0.5 / 3.0 bar DHW circuit pressure (min/max) bar 0.5 / 6.0 IP degree of protection X5D NO class x 6 Dimensions (HxWxD) mm 700x420x345 Net weight kg 34 x X like INOX, like the exchanger which is the engine of this wall-mounted condensing boiler. X is available in the instantaneous combined version (13.2 l/min), it runs on both methane and LPG (conversion kit supplied). Characteristics: Premix Low NOx burner (Class 6) IPX5D (also for outdoors) Compact dimensions and compatible with other Unical models (ideal for replacements) Template and unified connections (Unical KONm / KONe ) Minimum thermal power regulation in heating function Electronic antifreeze for operation down to -15 Management of 2 zones with differentiated priorities (high and low temperature) Electronics with HWS "Hot Water Speed" function to eliminate the delay in DHW production and automatic "air vent" function Layout conceived with large spaces for easy maintenance Wide choice of accessories including: - both modulating and on/off control thermostats - external probe for managing both the boiler and one or two high/low temperature zones STAINLESS STEEL EXCHANGER MONOSPIRAL WITH OVAL SECTION WITHOUT WELDING GREATER COMBUSTION VOLUME LESS EMISSIONS / HIGHER PERFORMANCE OPTIMIZED PRESSURE DROP REDUCTION OF DEPOSITS LESS NOISE LONGER DURATION OVER TIME FRONT ACCESS FOR EASY MAINTENANCE Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT BAXI ASSISTANCE IN ADVANCE Technical features Model : Luna Duo-Tec E 24 + Magician Nominal heat input 24 kW DHW nominal heat input: 24.7 kW Nominal heating heat input: 20.6 kW Heating energy efficiency class: A DHW energy efficiency class: A Load profile : XL Auxiliary electricity consumption: 0.013 ~ 0.030 kW Rated Electric Power: 85W Minimum operating temperature: -5°C Expansion vessel capacity: 8 lire Heating circuit water temperature adjustment: 25° ~ 80° C Sanitary water temperature adjustment: 35° ~ 60° C Specific flow rate according to EN 13203-1 : 11.5 l/min Sanitary water production ∆T 25 : 13.8 l/min DHW circuit minimum water flow rate: 2 l/min Heating circuit water pressure: 0.5 ~ 8 bar Sound power level : 49 dB(A) Degree of Protection : IPX5D Maximum length Ø 60/100 concentric exhaust-intake pipe: 10 m Maximum length of Ø 80 split exhaust-intake pipe: 80 m Maximum flue gas temperature: 80° C Power supply: CNG / LPG Dimensions and weight Dimensions (HxWxD): 763x450x345 mm Weight : 38.5Kg Features Baxi Magician Model: Baxi Magician Maximum cable length for the Baxi Mago bus: 50 m Maximum cable resistance: 2 x 5 ohms Operating conditions : 0°C ~ 60°C Temperature control area : 10° ~ 30° C Dimensions (WxHxD): 120x90x27 mm Baxi Luna Duo-Tec boiler + Mago as standard The ideal condensation both for new buildings and for the replacement of an old generator Aesthetics can change, not performance The already well-known Baxi boilers are presented today with a renewed aesthetic , increasingly modern and attentive to new design trends, which allows them to be inserted in any living context The control panel has also been completely renewed and is equipped with a new backlit LCD display that is even clearer and simpler to use thanks to dedicated and independent keys The boilers, even more beautiful and modern thanks to the restyling , still keep intact the characteristics that have always distinguished the Duo-tec range Reliability Robustness, durability and reliable performance Efficiency and savings . The reduction of the on/off cycles translates into significant benefits in terms of energy savings and lower emissions Completeness of the range Models for heating only, with instantaneous DHW production, and also the compact version with the possibility of outdoor installation . The range has been further enriched with the new models equipped as standard with the Baxi Mago modulating chronothermostat with integrated WI-FI The ideal boiler for new builds and for replacement The Duo-tec E range of gas-fired condensing boilers has been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make it particularly suitable both for new builds and for replacing an old generator . The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created for the final consumer, so that, through real and comparable data, he can make informed choices by targeting high-efficiency products Comfort management with Baxi Mago The Luna Duo-tec E 24/33 Mago and Duo-tec Compact E 24 Mago boilers are equipped AS STANDARD with the Baxi Mago, the modulating chronothermostat with integrated WI-FI designed to simplify the lives of installers, service centers and end users, as allows you to manage domestic comfort directly from an App , via the Wi-Fi connection. By downloading the dedicated App on your smartphone or tablet, it will be possible to connect to the Baxi Mago to control the temperature, manage programming, view the consumption graph, read any error messages, set the holiday mode, etc. An innovative tool with a unique design, which combines extreme practicality with a modern, captivating aesthetic with a strong appeal. The Duo-tec E range is compatible with the Baxi Mago available as an accessory , for remote boiler control Baxi Mago simplifies your life • Beautiful to look at and easy to use thanks to the comfortable rotary knob and the backlit color screen with large, easy-to-read numbers. Baxi Mago is now also available in the wireless version (wireless) therefore for its installation it is not necessary to drill the wall • Allows automatic and fast programming based on the user's schedule and habits • Allows management from different smartphones and tablets , so that every member of the family can interact • Follows your programs by creating five different daily scenarios linked to multiple temperature requirements ("daytime", "nighttime", "evening", "away from home" scenario, etc.) • It saves you money and you can consult energy consumption graphs with weekly, monthly or yearly trends Digital control panel The Duo-tec E range of boilers is equipped with a new digital control panel with backlit LCD display that is even clearer and simpler to use thanks to dedicated and independent keys for regulating the temperature of the domestic hot water and heating. The display allows you to view all the information and set the operating parameters in an intuitive and immediate way Exchanger preheating function The boilers of the Duo-tec E range are equipped with the exchanger pre-heating function which guarantees the immediate production of domestic hot water at the set comfort temperature. In fact, the sanitary water passing through the plates of the preheated exchanger is already supplied at the desired temperature without waiting times . The function can be easily activated/deactivated by a specific boiler parameter Fully modulating pump with de-aeration The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs Efficiency and savings Wide modulation range • Greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions • Adjustment of the thermal power produced to the dissipated power thus avoiding excessive overheating/cooling of the premises GAC Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values Advantages • No manual intervention - reduced measuring, calibration or nozzle changing • With this system, the boiler self-adapts to the quality of the gas and the length of the flue gas pipes, keeping efficiency constant • The boiler also constantly regulates itself to maintain the maximum efficiency values, favoring a reduction in gas consumption and generating less pollution thanks to the continuous control of emissions Guidelines in case of replacement of a conventional boiler with a new condensing one There are two main problems that can be encountered: • FLUES AND FUME EXHAUST DUCT • CONDENSATE DRAIN To remedy the above it is recommended: the use of a Ø50 mm exhaust pipe Baxi has in fact developed a system that allows easy ducting in existing flues (for 24kW models). For condensing boilers, the novelty is brought about by the low temperatures of the fumes which allow the use of specific plastic materials; however, in the presence of existing 316 stainless steel flues, installed correctly and with gaskets suitable for receiving damp fumes, there are no problems and they can easily be reconnected to the new boilers while it is absolutely not compliant with the use of aluminum flues or smoke pipes . In fact, aluminum is a metal that is not resistant to the acid condensates present in the fumes Each Ø50 mm diameter bend decreases the length of the drain by 4m the use of the condensate drain pump Baxi has designed this kit to collect the condensate produced by condensing boilers for domestic use: the pump allows the creation of condensate drainage systems in the absence of natural drainage near the boiler. The operation of condensing boilers determines the formation of condensate, due to the principle of condensation. This water therefore needs to be disposed of through special drains. If there is no adequate slope and therefore it is not possible to dispose of the condensate by gravity, it is necessary to install a pump that conveys it towards the drains. The pumps used are also equipped with special non-return valves to avoid bacterial contamination due to any stagnation and return of the waste water. The use of these devices also makes it possible to respect the aesthetics of the buildings by avoiding the use of annoying pipes. Main Features Luna Duo-Tec E • Modern and elegant design for the whole range • Baxi Mago STANDARD: Dedicated app for smartphones and tablets for remote control of the boiler (for Luna Duo-tec E 24/33 Mago models); accessory on request for all the other models • Wide modulation range up to 1:7 (1:6 mod. 1.12) greater efficiency and silence • GAC (gas adaptive control): automatic combustion control • Digital control panel with large backlit LCD display • Arrangement for combination with the Baxi integrated solar system • Connection to rigid and flexible Ø50 mm exhaust pipe: solution for restoring flues - for mod. 24 kW total length 40 meters (intake+exhaust) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code: 3301024 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal thermal power kW 28 Nominal heat input in DHW max/min PCI 30.0 / 3.8 Efficiency at nominal heat input (60/80°C) PCI % 97.9 NOx class Class 6 Maximum heating pressure 3 bar Expansion vessel capacity l 8 Min/max DHW temperature °C 36 / 60 Instantaneous quantity of hot water ΔT=25°C l/min 17.4 Power supply: METHANE Dimensions HxWxD mm 745x400x385 Functionality: / XtraTech™ heat exchanger in exclusive Ariston stainless steel, with high head / Class A+ in heating reachable with thermoregulation / Modulation ratio 1:8 / Wifi integrated in the boiler /LCD displays / BusBridgeNet® communication protocol / AUTO function, Comfort / Optimized internal silencer / Installation in partially protected places / Smoke outlet 80, 60, 50 mm CLASS ONE WIFI XtraTech™ is the new exclusive* Ariston stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort: Innovative functions to meet your needs ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: THE CURVE AND THE PIPE FOR THE COAXIAL KIT MUST BE PURCHASED SEPARATELY Rinnai Condensing Boiler Momiji 29 kW Complete with Fume Exhaust Kit with Integrated Wi-Fi Chronothermostat Low NOx Methane REB-KAI2529FF Code RREB-KAI2529FF Heating energy class A XL load profile Nominal thermal power kW 24 EN677 efficiency on PCI (80-60°C) % 96.1 Nominal power modulation (80-60°C) Heating kW 8.2 - 23.8 NOx class 6 Maximum electric power absorbed in heating W 98 Electrical power in stand-by W < 3 Supply voltage V/Hz 230 / 50 Degree of protection IPX5D Domestic hot water delivery (ΔT=35°C) l/min 11.6 Domestic hot water delivery (ΔT=25°C) l/min 16.3 Dimensions (H x W x D) (mm)660x440x285 MOMIJI The warm embrace of autumn MOMIJI are the red maple trees typical of the Orient, whose leaves color autumn red, a season that the Japanese experience as "comfort". Thanks to the mild climate and temperatures that are once again welcoming (no longer the torrid heat of summer, not yet the freezing climate of winter), taking time out is even more pleasant. Enjoying your home, as well as the foliage, gives well-being. Momiji best interprets the combination of traditional systems and condensing technology. In fact, while integrating perfectly with different systems, it is designed to optimize the condensation technology on radiator systems, responding concretely to the needs for savings and eco-sustainability of this type of heating, extremely widespread but often unable to fully exploit the advantages of condensation. The heating is smart Momiji offers the standard Wi-Fi chronothermostat (which can also be installed in a room other than that of the generator) to manage and control the boiler anytime, anywhere, in complete freedom. Consumption reports, weekly programming, modification of settings and management of multiple boilers (such as one's own and that of elderly parents, or the house in the mountains) from the same "My Rinnai" APP, available for Android and iOS smartphones. All this and much more to offer you totally smart management. The integrated climatic probe is a standard of Rinnai heat generators: the internal positioning allows you, who use it and you who install it, to avoid masonry work and electrical connections. Thanks to this sensor, you can forget about regulating the temperature in your home and let the generator take care of everything, intelligently adjusting its operation according to the weather, more or less cold. So while the boiler operates in climatic regulation with sliding temperature, you can enjoy a perfect balance between comfort and savings, and no worries. Momiji Comfort has never been easier Easy, everywhere Like the Rinnai Infinity water heaters, the Momiji boilers are also specifically designed to facilitate the installer's work. The device is small, light and compact. It is ready to use and does not need to be configured. The flue system is split Ø80/80 and, thanks to the high prevalence of the fan, it is possible to reach up to 30 equivalent linear metres. Thermal exchange Momiji has a copper heat exchange, with a large passage section: this facilitates integration into existing radiator systems and simplifies cleaning operations. This range of boilers is the perfect solution for often imperfect traditional systems. Can also be installed outdoors Momiji is IPX5D certified and has the standard antifreeze kit up to -20°C. Thanks to these characteristics, it can also be installed outdoors without the need for additional protection Integrated condensate neutraliser The Momiji series features the condensate siphon integrated inside the generator, already added with granulate and immediately ready for use. This allows you to simplify installation, always, even when replacing a traditional high temperature generator. The integrated neutralizer, in fact, allows you to eliminate the acidity of the condensate (acidic pH water produced by the normal operation of the heat generator, corrosive for the pipes) without having to face the costs of purchasing and maintaining an external accessory that performs this function otherwise essential. Product Warranty: The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT BAXI ASSISTANCE IN ADVANCE Baxi Luna Classic 24 kW low NOx condensing boiler complete with methane or LPG fume exhaust kit - New optional Wi-Fi Technical features Sanitary nominal thermal power kW 24.7 Heating rated thermal power kW 20.6 Useful thermal power at thermal power nom. and high temp. regime* P4 kW 20 XL load profile Seasonal space heating energy efficiency class A Water heating energy efficiency class A Seasonal space heating energy efficiency ?s % 94 Minimum operating temperature °C -5 Heating expansion vessel capacity l 7 Sanitary water production ?T 25°C (1) l/min 13.8 Dimensions (hxwxd) mm 700 x 395 x 285; 28.5 Degree of protection IPX5D CLASSIC MOON The new Luna Classic is the ideal product for apartments or small houses. Its compact dimensions (700x395x285 mm) ne allow installation in confined spaces such as kitchen wall units or in the laundry room. Excellent value for money, simple and intuitive management. The heart of the Luna Classic is the new electronic platform: this revolutionary system replaces the functions of the historical Luna models, raising the quality of the product to a new level. Great attention has been paid to meeting the needs of the end user. System customization and optimization are possible without compromising ease of use. The Luna Classic range includes 2 models for heating and the instantaneous production of domestic hot water, Luna Classic 24 and Luna Classic 28 User Interface Luna Classic Control Panel Renewed interface with: Backlit menu with icons; Simple settings to adjust the heating and domestic hot water temperature via two dedicated knobs; 4 buttons with dedicated functions: menu, confirm, back and reset. 2 functions for perfect water temperature Domestic hot water management can be enhanced and improved by activating two dedicated functions: relaxation function It is a pre-heating function which keeps the domestic hot water at the desired temperature for a pre-set period of time, or for 30 minutes after selecting the chosen temperature. Boost function Activates the boiler at maximum power for faster delivery of hot water. Baxi MaGO Luna Classic can be connected directly to the Baxi Mago, the modulating chronothermostat with integrated wi-fi that allows you to manage home comfort directly from an App. By downloading the dedicated App onto your smartphone, it will be possible to connect to one or more homes to control the temperature, manage the programming, display the consumption graph, read any messages error, set vacation mode, etc. The combination of the boiler with the Baxi Mago A+ kit increases its energy efficiency, raising it to class A+ Specifications: Operation with a mixture composed of up to 20% hydrogen New single coil stainless steel heat exchanger, featuring sections with large water passages for greater seasonal thermal efficiency Seasonal energy efficiency of 94% thanks to the advanced technology applied Renewed interface with backlit display Easy replacement of conventional boilers thanks to central flue gas outlet Modulation range 1:5 greater efficiency and silence Ø80 double exhaust STANDARD Connection to Ø50 mm rigid and flexible waste pipe: solutions for the rehabilitation of flues total length (exhaust + intake) 40 meters Connection to pressurized collective flues Boilers running on methane that can be converted to LPG and propane by means of a specific regulation (conversion kit not necessary) Compact dimensions: 700x395x285 mm Class A+ for Luna Classic 24/28 models with Baxi Mago and external probe (as accessories) New hydraulic group that guarantees maximum levels of performance and durability over time Optimal insulation for silent operation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta CIAO X 25 C low NOx 6 condensing boiler complete with LPG flue exhaust kit - NEW ErP cod. 20197877 Optional Wi-Fi Technical features Code: 20197875 Energy label specifications according to the European ErP directive Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Heating thermal capacity (max-min) 20.0 - 3.1 kw Nominal DHW heat input (max-min) 25.0 - 3.1 kw Supply voltage V-Hz 230 - 50 IP degree of protection IPX5D NOx class 6 LPG supply HEATING Max pressure-temperature bar-°C 3-90 Membrane expansion vessel l 8 SANITARY Max pressure bar 8 DHW production at ?T= 25 °C / 30 °C / 35 °C l/min 14.3/11.9/10.2 Minimum DHW flow l/min 2 DIMENSIONS, WEIGHT Boiler dimensions (HxWxD) mm 700x400x275 HELLO X, the comfort you deserve CIAO, ONE OF THE BEST-SELLING WALL-MOUNTED BOILERS EVER IN THE BERETTA PORTFOLIO, HAS BEEN COMPLETELY REDESIGNED, CREATING A NEW CONDENSING RANGE WITH MANY INNOVATIVE FEATURES AND ADVANTAGES: CIAO X The new Beretta range retains the distinctive characteristics of the previous models of the same name in terms of reliability and ease of use, adding many other important and innovative features: from the new primary heat exchanger in stainless steel , to the innovative touchpad interface up to the DIN standard hydraulic connections. With CIAO X, Beretta enhances the search for comfort and innovation with respect for the environment, which represents one of the strengths of the brand, starting from its origins. This renewed energy awareness translates into high efficiency, low consumption and a high modulation ratio (1:8), which combined with installation flexibility, compact dimensions and low weight, allow CIAO X to be placed at the top of its category. But there's more. HELLO X looks forward to future generations. The new range can already process a mixture of hydrogen up to 20%, the source of sustainable energy that will be the real ecological turning point in the coming years THE RANGE Ciao X is available in a complete range of 5 models, to meet the various needs of heating: CIAO X 25 C (combined, with dedicated codes for methane and LPG) CIAO X 30 C (combined) CIAO X 15 R (heating only) CIAO X 25 R (heating only) The compact dimensions and low weight of CIAO X allow it to be installed practically anywhere in the home, even in a wall unit in the kitchen. The product can also be installed outside the home (recessed in a BOX or in a partially protected place). CHECK YOUR COMFORT WITH A TOUCH One of the distinctive features of the new CIAO X is the digital touchpad interface, which combines design and innovation with ease of use. With a simple touch on 7 points of the panel, you can intuitively access all the settings and the boiler and system parameters. Each touch activates a buzzer, which generates acoustic feedback to confirm the operation. The LCD display communicates with the user and the installer through icons, without using texts, in order to allow an immediate understanding of the displayed function. EVERYWHERE HELLO X The soft and essential lines of the innovative touch control give CIAO X a modern and pleasant character, which facilitates integration into any context. The compact dimensions and low weight allow the boiler to be easily installed practically everywhere, not only inside the home, but also outside (recessed in a box or in a partially protected place). CIAO X is therefore ideal for replacing old boilers, both with DIN and Beretta connection sequences, thanks to the availability of accessory kits that simplify conversion. A wide range of accessories completes the CIAO X offer: flue kits, compact water filters (softener and magnetic) and cover of the hydraulic connections, facilitating their installation and harmonizing their integration, both indoors and outdoors. NEW STAINLESS STEEL CONDENSING EXCHANGER CIAO X is equipped with a new primary exchanger in stainless steel , with a smooth tube with a large section, to ensure excellent efficiency and cleanliness over time. Stainless steel, in addition to the high resistance to the corrosive action of acid condensate, prevents the internal formation of oxides and other electrochemical phenomena typical in installation on old systems. The single wrapped coil geometry (hydraulic circuit in series) ensures constant flow in all sections of the exchanger and intrinsically prevents clogging phenomena. Front access facilitates periodic maintenance and cleaning of the combustion chamber NEW FUNCTIONS FOR GREATER COMFORT IN SANITARY In the combined models, the high-performance plate exchanger, connected to the primary hot water circuit, allows domestic hot water to be heated instantaneously, without the need for an external boiler. The new sanitary exchanger has been optimized by Beretta to obtain high performance and maximum comfort for the end user in terms of temperature stability and reduced waiting times. These pluses, which place CIAO X at the top of the reference category, ultimately translate into water and energy saving, for greater respect for the environment. Here are some of the special functions of CIAO X: The PREHEATING function and its evolution in PREHEATING SMART have been designed to further reduce water and gas consumption. In fact, these functions make it possible to keep the water warm inside the new high-efficiency plate exchanger, produced in our factories, while reducing waiting times. The TOUCH & GO function allows you to activate instant pre-heating, only for a specific request. Other special functions such as DOMESTIC DELAY, ANTI-OSCILLATION, SMART FAN allow to improve the performance of the boiler in particularly difficult operating conditions, such as for example in the case of very low or very high inlet water temperature, or a very shallow water HI, COMFORT YOUR COMFORT AT YOUR FINGERTIPS CIAO X* IS COMPATIBLE WITH HI, COMFORT, THE NEW IOT SOLUTION PLATFORM BY BERETTA, WHICH ALLOWS TO MANAGE COMFORT IN A SIMPLE AND INTUITIVE WAY The end user can manage the home climate with the traditional HI, COMFORT T100 thermostat control, via the new HI, COMFORT App, which can be connected to the thermostat via the Wi-Fi box. The new App can be downloaded free of charge for Android and iOS systems and allows you to monitor the status, remotely set the domestic hot water temperature and define the boiler settings in a simple and safe. Furthermore, installing HI, COMFORT T100 is quick and easy and, in case of replacement of an old thermostat, does not require interventions on the electrical system of the house. HI, COMFORT T100, battery powered, also allows "wireless" installation, if the system is equipped with a radio frequency receiver SMART KEY K100 The new CIAO X range was created ready for the K100 Smart Key, an accessory designed for the latest generation Beretta condensing boilers, which marks their evolution towards increasingly eco-sustainable comfort. The Smart Key K100, through the App proprietary HI, COMFORT, allows you to know the operating status of the boiler, change its parameters and much more, all remotely. The various functions of the Smart Key K100 are certainly of interest to the user: from the "Bottle Function", to protect children and non-self-sufficient users from the risk of burns, to the "Booster Function", to maximize speed heating the environment, up to the "Wellness Function", to maintain a constant hot water temperature for maximum comfort and much more, all to be discovered. And for users who are increasingly attentive to the environment, it is possible, through the HI, COMFORT App, to monitor and manage the use of energy in their heating system, saving up to 15%* of consumption and avoiding unnecessary waste. For a sustainable future CIAO X is born ready to work with mixtures of natural gas and hydrogen - up to a maximum of 20% - a first important step towards achieving the objectives of environmental sustainability and the path of decarbonization initiated by the European Union. Availability in huge quantities Producibility using low-impact methods and in a sustainable way from renewable sources, such as wind energy, photovoltaics and biomass Reduction of polluting emissions in the percentage relative to its use Real opportunity for change to start the decarbonization process, fight global climate change, improve air and life quality Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CAUTION Natural gas, LPG and propane air operation without the need for a kit. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu. For info, contact the local authorized assistance center in advance Ariston ALTEAS ONE NET+ 30 kW A+ condensing boiler with Integrated Wi-Fi Methane or LPG Technical features Nominal heat input in heating max/min PCI 28.3 Nominal heat input in DHW max/min PCI kW 30/3 Combustion efficiency (flue gas) % 97.9 Efficiency at 30% at 30°C PCI % 109.5 NOx class Class 6 Maximum heating pressure 3 bar Expansion vessel capacity l 8 Min/max DHW temperature °C 36 / 60 Specific flow rate in DHW (10 min. with ΔT=30°C) l/min 14.3 Supply voltage/frequency V/Hz 230/50 Total absorbed electric power 83 Minimum ambient temperature of use 2 °C > 0° Degree of protection of the electrical system IP X5D Energy class A+ (Achievable with standard thermoregulation accessory and web reference for external temperature) Energy class in sanitary A XL withdrawal profile Dimensions WxHxD mm 400x745x385 ALTEAS ONE NET+ Latest generation condensing boiler with integrated Wi-Fi and voice control. Compatible with hydrogen blends up to 20%. Voice Control With Alteas one net+ your voice is enough to manage the comfort of your home thanks to the integration of the Ariston Smart NET with Google Home and Alexa. H2Ready Compatible with hydrogen blends up to 20%. Ariston's important commitment to introduce hydrogen in heating. Class A+ Thanks to the integration of the standard SENSYS HD, it is possible to reach class A+ guaranteeing energy savings. Characteristics Patented XtraTech™ high head stainless steel heat exchanger Modulation ratio 1:10 Low NOx levels (24 mg/kWh) Silent operation (only 46 db(A) Mod. 24kW) Compatibility with natural gas, LPG and propane air without the use of kits Ignition Control System+, stable and safe performance Hydro Sensor System, constant monitoring of system pressure Flow Control System+, optimal balance of flow and comfort Integrated Wi-Fi and ARISTON NET connectivity as standard Tempered and scratch resistant glass panel Large LCD display with touch interface Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CAUTION Natural gas, LPG and propane air operation without the need for a kit. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu. For info, contact the local authorized assistance center in advance ARISTON condensing BOILER ALTEAS ONE NET 35 KW EU METHANE COMPLETE WITH FUME EXHAUST KIT - ErP Technical features Product code: 3301060 Energy label specifications according to the European ErP directive Class A heating energy efficiency (A+ achieved thanks to thermoregulation) Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Nominal thermal power kW 31 Annual energy consumption in heating 54 gj Annual electricity consumption 50 kWh Seasonal space heating energy efficiency % 94 Water heating energy efficiency % 86 Sound power level inside 51 dB DHW flow rate ∆T 25 °C (l/min) 19.8 Dimensions 24 kW mm (HxWxD) 745 x 400 x 315 Indoor installation and partially protected places Power supply: methane or LPG Functionality: Connectivity integrated in the boiler HI-Comfort functions AUTO, Comfort, CARE Thermoregulation including CUBE thermostat + external probe Large display, touch interface XtraTech stainless steel heat exchanger General characteristics ONE Series , the new generation of condensing boilers Serie ONE is the new generation of Ariston condensing boilers, studied down to the smallest detail to guarantee maximum performance for a long time. New XTRATECH heat exchanger : Maximum quality. XtraTech is the new exclusive* Ariston stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations. Excellent results, over time. Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort : Innovative functions to satisfy your need ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. ALTEAS ONE NET Top of the range condensing boiler, Italian design and integrated connectivity. It represents the perfect combination of excellent performance and innovative design. The front panel in tempered glass, the HI-tech display and integrated connectivity make Alteas the perfect boiler for exclusive furnishing solutions. The efficiency of the boiler combines with the advantages of the Ariston NET service to control your system remotely, keep consumption under control and have peace of mind thanks to a technician who is always by your side. All via a simple free smartphone app! New XtraTech exchanger in exclusive Ariston stainless steel*, with high head Exchanger passage sections +142% compared to the previous version Tempered and scratch resistant glass panel Large display, touch interface Ignition system, electronic combustion control Gas transformation from the technical menu Class A+ in heating, thanks to the Cube thermostat and external probe included as standard Modulation ratio 1:10 Ariston NET connectivity included in the boiler BusBridgeNet® communication protocol AUTO function, Comfort New CARE function, automatic reminder of ordinary maintenance Internal sound absorbing panels Installation in partially protected places Fumes discharge 80, 60, 50 m Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less