Caratteristiche tecniche: Codice prodotto : 20312.0224.0 Alimentazione : Metano/gpl Classe di efficienza energetica : A Performance riscaldamento Portata termica nominale : 3,0 ~ 21,0 kW Potenza utile 60°/80° C : 2,8 ~ 20,7 kW Potenza utile 30°/50° C : 3,2 ~ 22,8 kW Temperatura minima e massima riscaldamento : 25° ~ 80° C Pressione massima riscaldamento : 3,0 bar Performance sanitario Portata termica nominale : 3,0 ~ 26,0 kW Potenza utile 60°/80° C : 2,8 ~ 25,6 kW Potenza utile 30°/50° C : 3,2 ~ 28,2 kW Temperatura minima e massima sanitario : 35° ~ 55° C Pressione massima sanitario : 10,0 bar Quantità di condensa a Q.nom. 30°/50°C : 0,5 ~ 4,2 l/h Performance generali Classe NOx : 6 Capacità del vaso espansione : 8 l Portata massima (ΔT=25 K) : 15,4 l/min Portata massima (ΔT=35 K) : 10,7 l/min Portata sanitari specifica (ΔT=30 K) : 12,8 l/min Grado di protezione : IPX5D Dimensioni e peso Dimensioni (AxLxP) : 700x400x300 mm Peso : 31,5 Kg RinNova Adaptive Fast 25S A+ Caldaia a condensazione ad alto rendimento con microaccumulo RinNova Adaptive Fast è la nuova gamma BIASI di caldaie murali combinate a condensazione con scambiatore/microaccumulo. Grazie alla linea moderna è facilmente installabile negli ambienti domestici ed è caratterizzata da un elevato comfort sanitario.L’esclusivo scambiatore sanitario, con microaccumulo da 4 litri assicura l’immediata erogazione di acqua calda, anche in caso di prelievi minimi ed una elevata stabilità della temperatura.L’innovativo sistema elettronico che gestisce la combustione, è in grado di adattarsi in autonomia alle differenti tipologie di gas, garantendo sempre una combustione efficiente e sicura. Gestione remota della temperatura Il comfort è a portata di mano Grazie all’App Biasi Connect è possibile gestire la caldaia da remoto. Per utilizzarla è necessario disporre del KIT Biasi Connect in aggiunta al comando remoto evoluto. Il comando evoluto consente di modulare la temperatura di mandata dell’acqua dell’impianto in funzione della temperatura ambiente e della temperatura esterna Quali sono i vantaggi? Riduzione dei consumi, risparmio energetico ed estrema flessibilità: la regolazione è flessibile in base alle proprie esigenze ed abitudini giornaliere. Si può inoltre regolare con un click la temperatura dell’acqua calda sanitaria Consapevolezza del proprio impianto: si può sempre vigilare in tempo reale sul corretto funzionamento del generatore di calore Sicurezza: Si possono vedere in tempo reale eventuali anomalie, unitamente al relativo codice di errore. Così si potrà intervenire immediatamente e quando possibile anche da remoto Kit "BIASI Connect" È un "Dispositivo di connessione" Wi-Fi che, operando nelle rete WLAN domestica, permette il controllo della termoregolazione ambiente e del funzionamento della caldaia, sia localmente che da remoto, mediante la nostra APP dedicata. Semplicità di installazione e di utilizzo Per l’installazione del Kit “BIASI Connect” e per la configurazione e l’uso dell' App consultare il Manuale istruzione, installazione ed uso "Biasi Connect". L' App è scaricabile dallo store del proprio dispositivo: Nuovo Scambiatore/Microaccumulo Una soluzione per un comfort unico Grazie all’esclusivo scambiatore sanitario con microaccumulo, vengono accumulati 4 litri di acqua calda, che garantiscono l’immediata disponibilità di acqua sanitaria senza le oscillazioni della prima fase di una normale caldaia istantanea; è realizzato in acciaio/rame ed è coibentato con gusci in EPS per ridurre le perdite di calore in stand-by, un esclusivo sistema che mantiene sempre in temperatura lo scambiatore/microaccumulo, nella fase di prelievo la caldaia passa in produzione istantanea secondo le richieste dell’utenza, al cui termine si trova già alla temperatura impostata, pronto per il prelievo successivo. Tecnologia Gas Adaptive Meno consumi, più efficienza, meno emissioni L’innovativa tecnologia Adaptive Gas, di cui sono dotati tutti i modelli della linea Rinnova, consente l’adattamento in completa autonomia delle caldaie alle diverse tipologie e qualità di gas. L’elettrodo, oltre a rilevare la fiamma, rileva anche le caratteristiche del gas e adatta automaticamente i parametri di combustione per mantenere il massimo livello di efficenza, con conseguente riduzione dei consumi e delle emissioni rispetto ai sistemi di controllo tradizionale. ll sistema Adaptive gas rende la caldaia predisposta a funzionare con qualsiasi tipo di gas senza trasformazioni. Regolazione automatica del gas Adattamento al cambio della qualità del gas Combustione pulita Unico modello adatto a metano e GPL che consente di ottimizzare il magazzinio Nelle caldaie tradizionali i valori della combustione vengono rilevati e regolati solo in fase di manutenzione, inoltre la composizione dei gas di rete non è sempre costante e può creare sulle caldaie prive di dispositivi di controllo della combustione inefficenze del funzionamento compromettendo l’affidabilità, i risparmi e la qualità delle emissioni.Grazie al sistema Gas-Adaptive, le nuove caldaie a condensazione controllano elettronicamente la combustione gestendo al meglio ed in ogni momento l’apporto di gas e aria, adattando automaticamente la CO2. Una produzione "Plastic-FREE" Per un ambiente più sostenibile Un elemento fondamentale che ha guidato tutta la fase di progettazione della nuova caldaia Rinnova Adaptive è la forte attenzione nei confronti dell’economia circolare. Per questo abbiamo impiegato componenti con un maggiore tasso di riciclabilità, eliminando il più possibile l’utilizzo della plastica. Il gruppo in plastica, ad esempio, è stato sostituito con il gruppo in ottone, materiale completamente riciclabile. I gusci di protezione della caldaia sono stati realizzati in cartone e non più in polistirolo. Il frontale, inoltre, non è più in plastica ma in acciaio stampato. Funzionalità del pannello comandi Selettore estate/inverno/off/reset Regolatore temperatura riscaldamento Regolatore temperatura sanitario Lettura digitale della pressione Visualizzazione temperatura sanitaria e riscaldamento da display Visualizzazione diagnostica guasti, stato di blocco e storico guasti Visualizzazione riempimento consigliato e guida al riempimento Visualizzazione mesi mancanti alla scadenza della manutenzione Abilitazione preriscaldo sanitario Funzione FAST: preriscaldo accumulo sanitario Garanzia prodotto : La garanzia su questo articolo è di 24 mesi dalla data dell'acquisto.
€1.827,00
Caratteristiche Tecniche: Portata termica nominale riscaldamento/sanitario kW 21,0 / 26,0 kW Portata termica minima riscaldamento/sanitario kW 3,0 / 3,0 Potenza utile massima riscaldamento/sanitario 60°/80°C * kW 20,7 / 25,6 kW Potenza utile minima riscaldamento/sanitario 60°/80°C * kW 2,8 / 2,8 Potenza utile massima riscaldamento/sanitario 30°/50°C ** kW 22,8 / 28,2 kW Potenza utile minima riscaldamento/sanitario 30°/50°C ** kW 3,2 / 3,2 Classe NOx 6 Temperatura minima/massima riscaldamento: °C 25 / 80 Pressione minima/massima riscaldamento bar 0,3 / 3 Capacità del vaso espansione (totale/utile) l 8 Temperatura minima/massima sanitario °C 35 / 55 Pressione minima/massima sanitario bar 0,3 / 10 Portata massima (ΔT=25 K) / (ΔT=35 K) l/min 15,4 / 10,7 Tensione/Potenza alla portata termica nominale V~/ W 230 / 100 Grado di protezione IPX5D Altezza x Larghezza x Profondità mm 700 x 400 x 300 Peso kg 31,5 Contenuto d’acqua della caldaia l 2,5 Codice 10314.2075.0 Combustibile Metano (G20) – Propano (G31) RinNova adaptive La caldaia a condensazione RinNova Adaptive, a differenza delle caldaie tradizionali, consente di recuperare energia condensando il vapore acqueo contenuto nei fumi di scarico; cioè, a parità di calore prodotto, consuma meno gas ed inoltre i fumi di scarico contengono meno sostanze dannose per l’ambiente. I materiali che la compongono e i sistemi di regolazione di cui è dotata offrono sicurezza, comfort elevato e risparmio energetico, così da poter apprezzare al massimo i vantaggi del riscaldamento autonomo.RinNova Adaptive è il nuovo modello BIASI di caldaia murale a condensazione.Offre ottime prestazioni e alti rendimenti che durano nel tempo, grazie all’innovativo scambiatore di calore. Semplice da utilizzare grazie al pannello di controllo digitale, con display progettato per comunicare con l’utente in maniera facile e comoda. Caratteristiche tecniche Caldaia con scambiatore primario in acciaio inox mono circuito, privo di giunzioni e/o saldature, che mantiene un’alta efficienza anche su impianti non recenti Nuovo sistema di combustione con tecnologia brevettata gas-adaptive (Advanced Adaptive Gas Combustion Control – A²GC²) L’elettronica analizza continuamente la combustione (CO2) attraverso il segnale di fiamma e interviene agendo sulla valvola gas e sul ventilatore, per permettere una corretta combustione in tutte le condizioni d’utilizzo. L’elettronica permette di adattare facilmente la caldaia ai vari tipi di gas senza dover intervenire con kit di trasformazione meccanica Produzione istantanea di acqua calda sanitaria con scambiatore a piastre dedicato Funzione Prerirscaldo Sanitario: maggior rapidità nell’erogazione di acqua calda sanitaria Interfaccia utente con display e tasti multifunzione per la regolazione e l’impostazione dei parametri By-pass di serie facilmente ispezionabile Sistema Protezione camino: gestione elettronica delle sovratemperature fumi, garantendo la massima protezione del camino Intubamento su canne fumarie: particolarmente adatta al funzionamento in canne fumarie che necessitano di intubamenti che presentano alte perdite di carico Minime emissioni inquinanti (classe VI - EN 15502-1) Funzionamento a temperatura scorrevole tramite sonda esterna opzionale Circolatore riscaldamento modulante a basso consumo (ErP Ready - Classe A) Controllo fiamma digitale a tre tentativi di riaccensione in caso di blocco funzionamento per mancanza di rilevazione fiamma (configurazione a metano) Mantellatura smontabile in tre pezzi per una più semplice manutenzione o ispezione Per versioni SV: possibilità di impostare la potenza massima erogabile al bollitore esterno Tecnologia Gas AdaptiveMeno consumi, più efficienza, meno emissioniL’innovativa tecnologia Adaptive Gas, di cui sono dotati tutti i modelli della linea Rinnova, consente l’adattamento in completa autonomia delle caldaie alle diverse tipologie e qualità di gas. L’elettrodo, oltre a rilevare la fiamma, rileva anche le caratteristiche del gas e adatta automaticamente i parametri di combustione per mantenere il massimo livello di efficenza, con conseguente riduzione dei consumi e delle emissioni rispetto ai sistemi di controllo tradizionale. ll sistema Adaptive gas rende la caldaia predisposta a funzionare con qualsiasi tipo di gas senza trasformazioni. Regolazione automatica del gas Adattamento al cambio della qualità del gas Combustione pulita Unico modello adatto a metano e GPL che consente di ottimizzare il magazzinio Nelle caldaie tradizionali i valori della combustione vengono rilevati e regolati solo in fase di manutenzione, inoltre la composizione dei gas di rete non è sempre costante e può creare sulle caldaie prive di dispositivi di controllo della combustione inefficenze del funzionamento compromettendo l’affidabilità, i risparmi e la qualità delle emissioni. Grazie al sistema Gas-Adaptive, le nuove caldaie a condensazione controllano elettronicamente la combustione gestendo al meglio ed in ogni momento l’apporto di gas e aria, adattando automaticamente la CO2. Una produzione "Plastic-FREE"Per un ambiente più sostenibileUn elemento fondamentale che ha guidato tutta la fase di progettazione della nuova caldaia Rinnova Adaptive è la forte attenzione nei confronti dell’economia circolare. Per questo abbiamo impiegato componenti con un maggiore tasso di riciclabilità, eliminando il più possibile l’utilizzo della plastica. Il gruppo in plastica, ad esempio, è stato sostituito con il gruppo in ottone, materiale completamente riciclabile. I gusci di protezione della caldaia sono stati realizzati in cartone e non più in polistirolo. Il frontale, inoltre, non è più in plastica ma in acciaio stampato. TermoregolazioneRegolazione climatica (con sonda esterna opzionale) e regolazione ambiente (remoto) per permettere una corretta gestione della temperatura dell’acqua allo scopo di ridurre i consumi e conseguentemente una riduzione delle emissioni.Utilizzando la regolazione climatica anche il rendimento di regolazione si innalza, conferendo maggior valore all’abitazione. Scambiatore primario monospira ad alta circolazioneBiasi, introduce nel 2017 lo scambiatore Round. Dimostrata la grandissima affidabilità lo addotta nella gamma Rinnova Adaptive. Round è uno scambiatore di calore monotermico compatto basato su una serpentina di acciaio inox con una sezione ovale. Lo scambiatore di calore è costituito da una camera di combustione, zona di condensazione e un disco metallico coibentato protetto con fibra ceramica siliconica che separa le due aree.Utilizzando un singolo nastro di acciaio inossidabile per produrre la serpentina, compresi attacchi ingresso/uscita, si ottengono i seguenti vantaggi: Si evita l’accumulo di sporco e detriti La portata acqua è distribuita uniformemente e garantisce uno scambio termico omogeneo La portata acqua è costante per una più lunga vita del prodotto Riduzione delle perdite di carico con circuito ottimizzato La facilita di pulizia e la robustezza di tale scambiatore sono uno dei principali punti di forza del prodotto dato che può essere utilizzato su impianti nuovi ma anche su impianti vecchi in caso di ristrutturazioni. Round integra la funzione round flow nella quale l’acqua produce un effetto centrifugo di pulizia delle pareti interne della mono spira. L’assenza di circuiti in parallelo garantisce una agevole operazione di “lavaggio” dello scambiatore e l’eliminazione di eventuale aria presente nel circuito dell’impianto. Garanzia Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€1.079,00
Caratteristiche Tecniche: Portata Termica max min riscaldamento: 20,6 / 5 kW Portata Termica max min riscaldamento (80/60 °C) : 20,0 / 4,9 kW Portata Termica max min riscaldamento (50/30°C): 21,8 / 5,3 kW Portata termica max min sanitario (Hi): 25,0 / 5,0 kW Potenza termica max min sanitario: 24,3 / 4,9 Rendimento Pmax Pmin (80-60°C): 97,2 - 97,0 % Rendimento Pmax Pmin (50-30°C): 105,8 - 106,9 % Rendimento 30% : 108,8 % Pressione max min esercizio riscaldamento: 3 / 0,8 bar Pressione max min di esercizio sanitario: 9 / 0,3 Portata Sanitaria 25°C : 14 l/min Portata Sanitaria 30°C : 11,7 l/min Classe energetica riscaldamento sanitario: A Peso a vuoto: 27 kg Dimensioni (LxAxP) 420x700x250 mm FBC è un generatore termico con scambiatore in acciaio inossidabile con produzione sanitaria integrata, premiscelato a condensazione ad alto rendimento e basse emissioni, dotato di sistema di controllo a microprocessore. Può funzionare a Gas Naturale (G20), Gas Liquido (G30-G31), Aria Propanata (G230). L’apparecchio è a camera stagna ed è adatto all’installazione in interno o all’esterno in luogo parzialmente protetto (secondo EN 15502) con temperature fino a -5°C. Display digitale: Interfaccia intuitiva per controllare temperatura, modalità e diagnostica. Vantaggi: Riduzione dei costi: Minori consumi rispetto a caldaie standard, con un ritorno sull’investimento nel medio termine. Rispetto per l’ambiente: Emissioni inquinanti significativamente ridotte, in linea con le normative europee. Facilità di installazione e manutenzione: Design compatto per un'installazione versatile, sia a parete che incassata, e componenti accessibili per una manutenzione semplice. Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto
€662,00
Caratteristiche Tecniche: Portata Termica max min riscaldamento: 24,5 / 5,7 kW Portata Termica max min riscaldamento (80/60 °C) : 24,0 / 5,6 kW Portata Termica max min riscaldamento (50/30°C): 26,0 / 6,1 kW Portata termica max min sanitario (Hi): 28,5 / 5,5 kW Potenza termica max min sanitario: 28,0 / 5,5 Rendimento Pmax Pmin (80-60°C): 97,8 - 97,6 % Rendimento Pmax Pmin (50-30°C): 106,1 - 107,3 % Rendimento 30% : 109,7 % Pressione max min esercizio riscaldamento: 3 / 0,8 bar Pressione max min di esercizio sanitario: 9 / 0,3 Portata Sanitaria 25°C : 16,1 l/min Portata Sanitaria 30°C : 13,4 l/min Classe energetica riscaldamento sanitario: A Peso a vuoto: 27 kg Dimensioni (LxAxP) 420x700x250 mm FBC è un generatore termico con scambiatore in acciaio inossidabile con produzione sanitaria integrata, premiscelato a condensazione ad alto rendimento e basse emissioni, dotato di sistema di controllo a microprocessore. Può funzionare a Gas Naturale (G20), Gas Liquido (G30-G31), Aria Propanata (G230). L’apparecchio è a camera stagna ed è adatto all’installazione in interno o all’esterno in luogo parzialmente protetto (secondo EN 15502) con temperature fino a -5°C. Display digitale: Interfaccia intuitiva per controllare temperatura, modalità e diagnostica. Vantaggi: Riduzione dei costi: Minori consumi rispetto a caldaie standard, con un ritorno sull’investimento nel medio termine. Rispetto per l’ambiente: Emissioni inquinanti significativamente ridotte, in linea con le normative europee. Facilità di installazione e manutenzione: Design compatto per un'installazione versatile, sia a parete che incassata, e componenti accessibili per una manutenzione semplice. Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto
€755,00
Overview BIASI INOVIA COND E 25S METHANE CONDENSING BOILER - NEW ErP, SEALED CHAMBER COMPLETE WITH FUME EXHAUST KIT: Wall mounted condensing boilers. The premixed range is simple on the outside and technological on the inside. The sites displaying the Biasi web sales authorized brand have been authorized by BSG Caldaie a Gas SpA for the sale of Biasi products. These companies therefore release the conventional guarantee. Technical specifications o Model: Inovia Cond E 25S Energy label specifications according to the European ErP directive o Class A heating energy efficiency o Sanitary energy efficiency Class A o Withdrawal profile: XL Characteristics of heating/DHW operation: o DHW useful thermal power: 24.4 kW o Useful thermal power for heating: 19.5 kW o Nominal kW heat input(*): 25 kW o Efficiency at 100% load: 106.2% o Sanitary flow rate t =25°K: 15.9 l/min o High yields (in compliance with yield directive 92/42 CEE and Legislative Decree 311/06) o Sanitary comfort (EN 13203) o Total premix burner, built in stainless steel (Class NOx 5) o Sanitary plate heat exchanger in stainless steel o High efficiency pump with low energy consumption o IPX5D degree of protection o Dimensions hxwxd: mm 700 x 400 x 290; 32kg o METHANE power supply Main features Inovia Cond E Premixed condensing boilers Inovia Cond E represents the new premixed BIASI condensing boiler. Inovia Cond E is equipped with innovative aesthetics and a new interface that is immediate and easy to use, it is equipped with new functions that make it an integral part of a system and which facilitate its installation and maintenance. Inovia Cond E offers all the advantages of condensing technology: great performance, high efficiency, energy saving and respect for the environment thanks to reduced polluting emissions such as NOx and CO. Installed in low temperature systems, they allow savings of up to 30%. Characteristics: o • High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) or • Sanitary comfort (EN 13203) o • Primary condensing exchanger in stainless steel with plastic coating to offer maximum resistance to corrosion o • Total premix burner, built in stainless steel (Class NOx 5) or • Sanitary plate heat exchanger in stainless steel or • High efficiency pump with low energy consumption or • IPX5D degree of protection or • Can be installed in a partially protected place or • Integration with BIASI solar systems, using a solar kit o • Innovative digital control panel with graphic interface and keys or • Digital pressure reading by pressure transducer or • Arrangement for remote control and external probe or • Possibility of remotely managing a zone valve in the case of multi-zone systems. Control panel: o Summer/winter/off selector o Heating temperature regulator o DHW temperature regulator o Digital pressure reading o Domestic hot water and heating temperature visualization from the display o Visualization of fault diagnostics, block status and fault history o Recommended filling view and filling guide o View months left until annual maintenance is due o External temperature display (with external probe connected) and signaling of external probe connected and K value set o Display of flame modulation o Visualization of the BIASI SOLCONTROL solar control unit connected to Inovia Cond E, active solar pump and solar integration o DHW comfort function selectable by means of a dedicated and programmable key o Direct access to the INFO menu dedicated to the user. Fiscal detraction As a condensing boiler, Inovia Cond E allows you to take advantage of the tax deduction according to current legislation. d Thermoregulation By connecting the external probe (optional) directly to the boiler, climatic regulation can be used. Inovia Cond E will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption. The boiler is equipped with a complete set of curves which can be accessed by entering programming. The curve is simply chosen from the control panel. Solar management Inovia Cond E integrates solar management directly into the product. Thanks to the integrated solar management it is possible to connect the SOLCONTROL control unit and view the status of the pump and the relative solar integration. Zone management Inovia Cond E features the zone management card as standard which allows you to manage a zone valve using the BIASI remote control. In the case of a system with several high temperature zones, one zone can be managed by remote control and the other zones can be managed by chronothermostats. This allows you to select two thermoregulation curves, one in the boiler and the other in the remote control. All the zones controlled by chronothermostats will be managed by the thermoregulation curve set in the boiler, the zone controlled by the remote control will be managed by the thermoregulation curve set therein. In the case of multi-zone systems at high and low temperatures, it is recommended to use the BIASI MULTIzone system manager. All ready for Energy Labeling What is it about? From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the Eco-Design Directive (ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: or generators with a capacity of less than 400 kW or water heaters with a capacity of less than 400 kW, or kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows them to compare the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. Is it about me too? YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its devices or systems with the following documentation: o product energy label; o product data sheet; o system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices; o technical data sheet of the system with the parts relating to the product or the system already completed. o Dealer liability First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device and/or system to the public. Therefore even professionals such as plumbers, installers or planners can fall into this category. Everyone is required to ensure that: o all appliances and/or systems are equipped with the respective labels and make sure that they are clearly visible; o all devices and/or systems are always accompanied by the mandatory technical data sheets; o any type of advertising, promotional or technical material in which energy data or price indications are shown, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of device, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the final customer can make his choice in the most informed way possible. SYSTEM LABEL In addition to the product label, the system label is also provided if a series of matched appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.050,00
FERROLI BLUEHELIX K 50 25 Kw CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Characteristics: Seasonal space heating energy efficiency class A Water heating energy efficiency class A Declared load profile XL Heat Capacity (PCI) Min / Max Heating: 5.8 / 25.0 Thermal power 80°C-60°C: 5.7 / 24.5 Useful thermal efficiency 80°C-60°C Pmax % / Pmin %: 98.0 / 97.8 Emission class Nox class 5 Boiler capacity 50 litres Domestic hot water production Δt 30°C l/10 min 175 Sanitary Manufacturing (EN 13203) ★★★ Heating working pressure Max bar 3 DHW working pressure Max bar 9 Empty weight kg 50 Dimensions HxWxD: 800 x 600 x 420 Power supply: METHANE Certified operation also with LPG using a special kit to be requested from the Authorized Assistance Centre CHARACTERISTICS Boiler body with the new patented primary exchanger in thick AISI 316 TI stainless steel Production of domestic hot water with 50-litre stainless steel domestic hot water storage tank Total premix burner in stainless steel Electronic flame modulation both in heating and DHW Digital control panel Can be combined with the modulating remote timer control Low consumption modulating heating pump (Erp Ready - Class A) Refined design and compact size Casing painted in white by anaphoresis with epoxy powders 3-star certified comfort in sanitary manufacturing according to EN 13203 Sliding temperature operation via optional external probe Digital flame control with three re-ignition attempts in case of operation due to lack of flame detection (methane model) Arrangement for recirculation attachments Standard by-pass Place of installation: also for outdoors in a partially protected place up to - 5 ° C as standard TANGIBLE FACTS max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh * Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure at max speed of high efficiency circulator: €11.4 Therefore, with the replacement of standard boilers with Bluehelix K 50, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W. The low-consumption circulator installed in the Bluehelix K 50 has a variable flow rate, with ΔT control. The advantages o ered are many, including: System start-up from cold: faster start-up with full control of the thermal load on the components Long-lasting maintenance of the temperature equilibrium conditions, once the set point has been reached Better operation in limit conditions (e.g. at minimum power), reduction of on-oFF states Reactivity to variations in the thermal load, an appreciable quality in multi-zone systems ..ROBUST Others are the merits attributable to the circulator chosen for Bluehelix K 50: The PWM signal (pulse width modulation) to the circulator allows extremely rapid intervention times to complete an advanced and complete electronic platform. This results in a drastic reduction of the ON-OFF events of the burner and the circulator. Electronic control of the drive torque at start up with consequent reduction of the risk of blocking. The routine anti-seize cycle is in any case carried out every 24 hours of inactivity. Self-protection function in case of overheating Less noise All this translates into greater longevity not only of the circulator, but also of the components subject to wear and tear from frequent on-off cycles. COMFORT AND SAFETY The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance. SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. ANTI-LEGIONELLA FUNCTION In order to keep the storage cylinder in suitable hygienic-sanitary conditions, the product electronics are able to keep it at a temperature of 65°C at programmable time intervals from one to seven days. ANTI-BLOCK FUNCTION In order to avoid blockage and consequent damage to the heating circulator and the three-way diverter valve, after a set period of inactivity, the boiler electronics activate operation for a few seconds. ANTIFREEZE FUNCTION In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. ECONOMY/COMFORT FUNCTION By activating the appropriate key, heating/temperature maintenance can be excluded by the user (Economy). This makes it possible to reduce fuel consumption during periods of non-use of domestic water Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.394,00
Technical features Heating energy class: A; DHW energy class (domestic hot water): A (ErP); Declared load profile XL Nominal thermal power: 23 kW Nominal heat input: 23.5 kW Nominal thermal power sanitary: 28kW Useful thermal efficiency at rated power: 40/30 °C: 102% Useful thermal efficiency at 30% rated load: 40/30 °C: 108% Continuous sanitary production: 21 l/min Accumulation capacity: 42 l NOx class: 5 Degree of protection: IP X4D Version: CNG General characteristics The Cerapuracu boiler is equipped with a tank intended for the accumulation of domestic hot water, so as to guarantee a large quantity of water and has a very simple installation system. This feature makes it innovative by responding with high performance with energy saving. Delivered for outdoor installation, in a fairly protected place, in compliance with current legislation. Functions: Suitable for use with Ø 60 mm drains; 10 liter heating expansion tank; 2-litre sanitary expansion vessel; Class 5 emissions; Circulator dedicated to the accumulation of DHW Circulator for heating in Energy Class A. High efficiency primary heat exchanger; Oversized sanitary plate heat exchanger. Bosch Heatronic 3®, with BUS system, has various functions for changing application parameters; easy inspection of any stored anomalies; detection of the temperatures identified by the various sensors and indications regarding the status of the appliance; SolarInside-ControlUnit: solar optimization on/off; 42 liter stratified storage system divided into 3 tanks; Continuous modulation of both DHW and heating power; Modulating fan and premix burner; 7 bar safety valve for storage tanks; System filling device integrated in the boiler; Internal circulator dedicated to the DHW storage system and heating side circulator in Energy Class A. Can be combined with (Accessories): Possible remote management via MB LAN2 modules (accessory) which can be combined with CR 100 or CW thermoregulators. Management with Bosch Control CT100, digital modulating room thermoregulator, with soft touch display that can be positioned on the wall, with an elegant and refined design; accompanied by a smart and functional app (JunkersHome). Optimal combination with solar thermal systems for DHW using the TWM 20 accessory. Dimensions (LxWxH): 482 x 600 x 880 mm; 67kg
€2.595,00
Technical features Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating max heat input kW 28.0 Nominal thermal power kW 27.0 Efficiency Pmax (80/60°C) % 103.5 Directive efficiency class 92/42 EEC **** Max. heating operating pressure bar 3 Heating pressure min. bars 0.8 Domestic hot water production: -Δt 25°C: 15.7 l/min -Δt 30°C: 13.0 l/min Sanitary working pressure Max: 9 bar Dimensions WxHxD mm 700x400x320 mm Power supply: LPG *NB: ALSO OPERATES ON LPG WITH THE USE OF A SPECIAL CONVERSION KIT TO BE REQUESTED FROM THE AUTHORIZED SERVICE CENTRE. General characteristics DIVACONDENS F28 D DIVACONDENS D is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes. ADVANTAGES Robust post-condenser powered by the closed circuit of the primary circuit, i.e. without the inlet of external mains water. The heat exchange with the fumes takes place inside large diameter water passages. Generator with simple and rational operation Condensate collection device to protect the air pressure switch, for regular combustion even in the presence of very cold external temperatures ECO function in DHW for greater savings in the period of low use of hot water Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems Place of installation: also for outdoors in a partially protected place down to -5°C as standard Certified operation also with propane air (50% air – 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center (max total price of 30 euros + VAT) Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available. THE BOILER CONTROL The control box of DIVACONDENS D consists of an easy to use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. MAIN COMPONENTS RECOVERY UNIT/HYDRAULIC DIAGRAMS FUME THERMOSTAT It preserves the integrity of the polypropylene pipes and, together with the air pressure switch, constitutes a double safety device for the evacuation system. OPTIMIZE COMFORT AND SAVINGS ROMEO TIMER (optional) The Romeo remote control allows control and setting of the boiler functions directly from the room in which it is installed. Comfort programming is possible on a weekly basis and also includes the 'holiday' function. Romeo is available with wired or wireless connection. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. HIGH EFFICIENCY CIRCULATOR EU regulation 622/2012 establishes that all boilers introduced on the market from 1 August 2015 must be equipped with a high-efficiency circulator (technically speaking, with an EEI, energy efficiency index ≤ 0.23). This decision was taken following the enormous energy consumption of all pumps and circulators installed in different applications in Europe. In practice, a high-efficiency circulator - incorporated in the boiler - reduces up to 30% of the total electricity consumption of the boiler itself. ONE CENT PER HOUR If we consider the maximum consumption of the pump mounted on the Divacondens D (0.04 kWh) compared to the previous circulator (0.085 kWh) we will save almost a euro cent for each hour of operation (electricity cost €0.19/kWh). Let's therefore multiply this tiny value by each hour of operation of the circulator in a year (for example 2,500 hours, for a moderately cold climate) ... €21.40 will be the annual saving if we replace an old boiler, and therefore also a old circulator, with Divacondens SUN EASY FUNCTION DIVACONDENS D boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and switches on the burner only if necessary. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, by exploiting and integrating even the smallest solar contribution, otherwise lost by mixing the thermostatic valves. FUNCTIONS ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied due to thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode. OPERATION IN SLIDING TEMPERATURE With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The electronic board of DIVACONDENS D adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite. Product Guarantee: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.
€629,00
THE PRODUCT IS AVAILABLE ON ORDER Technical features Model : Victrix Tera 24 Plus Product code : 3.027373GPL Maximum nominal heat input in DHW: 28.8 kW Maximum nominal heat input in heating mode: 24.6 kW Minimum nominal heat input: 4.5 kW Maximum useful thermal power in DHW: 28.3 kW Maximum useful thermal power in heating: 24.1 kW Minimum useful thermal power: 4.3 kW Useful thermal efficiency at 100% Pn (80 / 60 °C): 97.8% Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) : 102.3% Useful thermal efficiency at 100% Pn (40 / 30 °C) : 106% Useful thermal efficiency at 30% of the nominal load. (40 / 30 °C) : 108.2% Minimum gas flow rate to the burner: 0.48 m 3 /h Maximum gas flow rate to the burner: 3.05 m 3 /h Weighted CO : 20 mg/kWh Weighted NO X : 35 mg/kWh Power supply: LPG NO x class : 6 Minimum suction/exhaust available head: 2 Pa Maximum suction/exhaust available head: 240 Pa Nominal heating expansion vessel capacity: 8 litres Electrical protection degree : IPX5D Dimensions and weight Dimensions (HxWxD): 748x440x256 mm Empty weight: 33.8 kg Immergas Victrix Tera Plus Mural compact and instant built-in and for heating only VICTRIX TERA 24 PLUS can be used as a boiler for room heating only or connected via an optional kit to a boiler unit for the production of domestic hot water Ideal for multiple withdrawals of domestic hot water For large domestic hot water needs or for multiple simultaneous withdrawals, the combination with the separate storage tank unit is possible with models from 80 to 2000 liters Combinations with solar thermal systems Storage tank units with a capacity of 120 liters or higher are designed for the combination of forced circulation thermal solar systems, including the UB INOX SOLAR 200 V2 version equipped with an integrated solar circuit. The VICTRIX TERA 24 PLUS boiler can be connected to the entire range of Immergas Solar Solutions Simplicity of commands The controls are simple, the LCD display is clear, and the selection buttons for adjustments and settings work quickly. Condensing module with stainless steel coil Low consumption in Stand-By, less than 6 W Class A circulator The low-consumption circulator allows considerable savings in electricity compared to a traditional circulator and adjusts its performance based on the variations in the hydraulic flow rate of the system, for example in the presence of thermostatic valves or zone valves Indoor/outdoor and recessed installation The range is approved for operation outside the home with top cover kit for installation in partially protected places (3.027263). An electric resistance kit is available to increase the antifreeze protection from -5 °C to -15 °C (3.017324) Recessed installation The built-in installation in the OMNI CONTAINER (3.016991) allows the boiler to be positioned outside in a niche and thus recover living space. To insert the boiler inside the OMNI CONTAINER it is necessary to use the optional support bracket (3.027129) Remote adjustment The boiler can be connected to the CAR V2 , the modulating chronothermostat which allows you to control the boiler comfortably from inside the home . The SMARTECH PLUS wireless chronothermostat with Bluetooth technology is also available: it allows you to adjust the heating temperature even with a smartphone via a dedicated app Solutions for compact hybrid systems The VICTRIX TERA range can be installed in TRIO V2/TRIO MONO V2 systems. Prepared for the combination of the condensing boiler with the AUDAX heat pumps and the use of solar thermal, they allow to increase the energy performance of the building and to exploit renewable energies by reducing harmful emissions . The TRIO V2 compact hybrid systems are ideal for small apartments but also single-family houses . They can be installed flush-mounted or in specific technical cabinets and allow for the reduction of installation space for plant engineering Installation flexibility with trio In applications with TRIO V2/TRIO MONO V2, the models of the VICTRIX TERA range can be installed in the SOLAR CONTAINER or in the DOMUS CONTAINER. The boiler support bracket is inserted as standard with the accessory kit for combination with AUDAX and instantaneous boiler and with the accessory kit for combination with AUDAX and PLUS boiler. Formula Comfort 10 It benefits from the most comprehensive maintenance program lasting 10 years with no activation costs , with the possibility of extending it up to 15 years . In collaboration with the Immergas Authorized Service Centre, it can be activated during the initial check Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€985,00
Riello Residence Condens 30 kis condensing boiler complete with Low NOx Methane Fume Kit class A - NEW Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Heating/DHW operating characteristics Heating nominal heat input kW 20 Nominal thermal power (80°-60°) heat kW 19.5 Maximum heating pressure bar 3 DHW nominal heat input kW 25 Nominal thermal power* sanitary kW 26.3 Hot water production with t+25 °cl/min 15.1 NOx class 5 Dimensions HxWxD mm 740x420x350 Electrical data Total electric power (pmax heating) W 75 Supply voltage V - Hz 230 - 50 IP X5D degree of protection Power supply: METHANE RESIDENCE CONDENS RIELLO PRESENTS RESIDENCE THE NEW RANGE OF CONDENSING BOILERS NEW EXCHANGER Wrapped stainless steel primary exchanger. Efficiency and reliability in the heart of the Residence. DOMESTIC COMFORT FUNCTION Domestic water pre-heating with Touch&Go function for activation upon request directly from the drawing tap. ACTIVE COMBUSTION CONTROL Advanced electronic combustion control system which constantly monitors combustion to obtain constantly optimized consumption and emissions. DIGITAL USER INTERFACE Simple and intuitive backlit LCD display. Ease of setting thanks to the silk-screened keys dedicated to the individual user functions. MODULATING CIRCULATOR High efficiency circulator with flow rate modulation and regulation logic that can be set between different modes according to the type of system. HIGH EFFICIENCY The high efficiency of the primary exchanger, the modulating circulator and the continuous control of the combustion parameters guarantee very low consumption even after years of operation. QUICK INSTALLATION Speed and ease of installation thanks to the compact dimensions, accessibility of the components and external electrical connections. UNIQUE VERSION METHANE - LPG Dedicated codes are no longer necessary in the case of LPG because Residence is able to automatically adapt its operation to the type of fuel with rapid setting from the display. FLEXIBLE INSTALLATION The characteristics of Residence and its compact dimensions make it the ideal solution for both indoor and recessed installation (model 25 KIS only) or outdoors in a partially protected place. RESIDENCE, HEART OF STEEL The new RESIDENCE exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. NEW PRIMARY EXCHANGER IN STAINLESS STEEL The single coil geometry (hydraulic circuit in series) guarantees constant flow in all sections of the exchanger and intrinsically prevents clogging. Front access facilitates periodic maintenance and cleaning of the combustion chamber. SELF-ADAPTING ELECTRONIC COMBUSTION CONTROL The new Residence is equipped with the intelligent ACC combustion control system, which guarantees that the process always takes place in an optimal manner in any condition, thanks to the modulating gas valve and the ionisation electrode. Thanks to the ACC, Residence is able to automatically adapt to the fuel (methane or LPG) without resorting to specific codes or accessory conversion kits. Residence also reacts to the variation of the fuel title and to the pressure drops on the flue gas side. The ACC system detects the excess air value and intervenes by modulating the mixture. The ACC system also simplifies installation. During ignition, it does not require calibration and it is sufficient to select the type of combustible gas used by the boiler via the interface, if different from the default one (methane). Since the system keeps the value of the CO2 produced constant, even the smoke control during the ignition phase is no longer necessary for the correct functioning of the product. Controlling combustion also means guaranteeing constant emissions, which are always well below the limits set by the law. In fact, if the process takes place in an optimal manner, the gases produced will also have the best theoretical composition with respect to the other conditions. MANY NEEDS, ONE SOLUTION RESIDENCE IS ALWAYS THE IDEAL CHOICE THANKS TO THE TECHNICAL SOLUTIONS AND THE COMPACT DIMENSIONS, IT CAN BE USED IN ANY INSTALLATION SITUATION INTERIOR Inside the home, thanks to an elegant aesthetic that allows it to be inserted pleasantly into any environment. OUTDOOR Outdoors in a partially protected place, thanks to the IPX5D degree of protection and the accessory antifreeze heater kit RECESSED Inside a built-in box thanks to its compact dimensions (model 25 KIS only). NEW DIGITAL CONTROL Setting your own comfort for domestic hot water, air and heating is immediate thanks to the buttons with symbols dedicated to the individual functions Domestic hot water temperature setting Operating status 0FF - SUMMER - WINTER Unlock and restore alarms Information and parameters menu Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.065,00
Baxi AVANT BLUE 24 Fi condensing boiler Low NOx 6 complete with flue kit cod. 7724370 - NEW Baxi brand Model Avant Blue 24 FI Product Code 7724370 Power 24 kW Energy class A Condensation type Heating/DHW nominal heat input kW 24.8 Sanitary nominal thermal power kW 24 Emissions of nitrogen oxides NOx mg/kWh 18 Sanitary water production ∆T 25°C l/min 13.7 Minimum domestic water flow rate l/min 2 Natural gas supply (LPG via conversion kit) Combustion Chamber Sealed chamber/Forced draft Degree of protection IPX5D Dimensions (LxHxP) - Weight 450x763x345 mm Weight; 43.5 kgs AVANTBLUE Baxi Avant Blue FI 7724370 NOx6 24 kW ErP natural gas, the condensing boiler with energy class A Low NOx emissions: class 6 according to EN 15502 Modulating fan Aluminum alloy condensing post-exchanger Sturdy and reliable: brass hydraulic unit with turbine sanitary sensor for optimal comfort and large passage copper exchanger Arrangement for combination with the Baxi integrated solar system Same settings as a traditional boiler (the analyzer is not necessary to adjust the gas valve) Operation on methane (possibility of operation on LPG with conversion kit) Control panel with multifunction LCD display hydraulic system Brass hydraulic unit with electric three-way diverter valve and turbine sanitary sensor Steel burner Copper water/fume exchanger Sanitary heat exchanger in stainless steel Aluminum alloy condensing post-exchanger High efficiency circulation pump Pump anti-blocking system and 3-way valve (which intervenes every 24 hours) Pump post-circulation Automatic by-pass Built-in condensate drain siphon Thermoregulation system Climatic adjustment (external probe available as an option) Heating circuit temperature adjustment DHW circuit temperature adjustment Remote control and climatic regulator available as an accessory, both in wired and wireless versions Control system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch which blocks the boiler in case of water shortage Safety air pressure switch for checking correct smoke evacuation Temperature control using NTC probes. Pressure indicator Electronic thermometer Total antifreeze protection Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€889,00
ATTENTION THIS PRODUCT IS MADE TO ORDER. SHIPPING TAKES PLACE WITHIN 10 WORKING DAYS FROM THE DATE OF PURCHASE NB THE BOILER WILL BE SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE RIELLO RESIDENCE EXTERNA CONDENS 32 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT -NEW ErP Technical features Product code: 20096735 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 30 kW Useful thermal power (sanitary): 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 104.7% Profit return 30% (47th return): 109.5% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 785 x 553 x 275 ; 46 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE RESIDENCE EXTERNAL CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models For outdoor installations Residence Externa Condens is specifically designed for outdoor installation and stands out for its extremely small dimensions. Equipped as standard with the exclusive Riello condensing exchanger, completely made of aluminum and without welding, synonymous with efficiency and durability, resistant to system dirt with high heads and excellent heat exchange. The climatic regulation is managed directly via the boiler board: this allows the temperature of the heating system to be suitably adapted to the external climatic conditions. Residence Externa Condens is controlled directly from inside the home thanks to the exclusive remote control supplied as standard. Residence Externa Condens is available with powers from 20 to 32 kW. Characteristics: Remote control panel supplied as standard Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) Antifreeze function that protects the heating and DHW circuits down to -5°C with the possibility of extending the protection down to -15°C (optional) "Winter with Pre-heating" function: allows the DHW exchanger to be maintained at temperature, reducing waiting times during withdrawal (instantaneous combined models) Possible "open-air" installation using the special waterproof kit (optional) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.920,00
