ARISTON GAS BOILER model CLAS X 24 CF METHANE Low NOx OPEN CHAMBER Technical features Product code: 3301313 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency B XL withdrawal profile Technical specifications. Nominal heat input max/min (heating) PCI kW 25.8-11.0 Nominal heat input max/min (sanitary) PCI kW 27-11 Max/min useful heat output (heating) kW 23.2-9.8 Efficiency at nominal heat input PCI: 90.1% Efficiency at 30% of nominal flow rate PCI: 89.9% Max/min heating temperature: 82-35°C DHW max/min temperature: 60-36°C Port. specific in healthcare (10 min. with ΔT=30°C): 11.8 litres/min Quantity of hot water (ΔT=25°C): 14.2 l/min Quantity of hot water (ΔT=35°C): 10.2 l/min Minimum ambient temperature of use: 5°C Supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 52,1W Degree of protection of the electrical system IP X4D Dimensions 24 kW mm (HxWxD) 745 x 400 x 315 Power supply: methane or LPG Characteristics LCD display Continuous modulation high efficiency circulator Prepared for Ariston Net connectivity Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Copper finned primary exchanger Cold water inlet and heating return filters Low NOx emissions < 56 mg/ Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BERETTA WALL-MOUNTED BOILER Open chamber MYNUTE 24 CAI LX Low Nox 24 kw CNG cod. 20151436 Mynute LOW NOX Nominal heat input kW 25.80 Nominal thermal power (80 - 60 °C) kW 24.05 Reduced thermal power (80 - 60 °C) kW 11.28 Reduced heat input kW 12.5 Electric power Watt 115 Supply voltage / frequency Volt/Hz 230 / 50 Electrical protection degree IP X5D Useful efficiency at Pn max ((80 - 60 °C) % 93.2 Useful efficiency at 30% of Pn (47 °C return) % 91.8 POLLUTANT EMISSIONS (G20) NOx according to UNI EN 483 class 5 HEATING EXERCISE Maximum pressure and temperatures bar/°C 3 / 90 Heating temperature selection range °C 40 / 80 Pump: pump head available for the system mbar 275 at a flow rate of 1000 litres/h Expansion vessel capacity 9 litres HEALTHCARE EXERCISE Maximum pressure 6 bar Minimum pressure bar 0.15 Quantity of hot water with ∆t=25°C litres/min 14 Minimum domestic water flow rate litres/min 2 DHW temperature selection range °C 37 - 60 CONNECTIONS Heating inlet - outlet Ø 3/4” DHW inlet - outlet Ø 1/2” Gas inlet Ø 3/4” COAXIAL FUME EXHAUST AND AIR INTAKE PIPES Diameter mm 60 - 100 Maximum length 2.5 m Loss for inserting a 90° / 45° bend m 1.5 / 1 SEPARATE FUME EXHAUST AND AIR INTAKE PIPES Diameter mm 80 + 80 Maximum length m 14 + 14 Loss for inserting a 90° / 45° bend m 1.7 / 1.2 DIMENSIONS, WEIGHT, GAS Boiler size (HxLxP) mm 780x400x338 Weight kg 35 Wall mounted boiler Beretta MYNUTE 24 CAI LX natural draft open instant combined methane Heating capacity 24kW and DHW (l/min-?t 25°C) 14, with low Nox emissions, specifically designed to facilitate the replacement of pre-existing wall boilers, Simple and intuitive digital display. Technical features: New boilers with low NOx emissions Low consumption circulator (EEI?0.20) as standard Specifically designed to facilitate the replacement of pre-existing wall-mounted boilers 9 liter expansion tank Simple and intuitive digital display Predisposition for climatic thermoregulation (optional external probe)Predisposition for connection to the BeSMART Comfort control (code 20143539) IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps (optional) The ecological burner To reach high standards Mynute Low NOx is equipped with a special atmospheric burner, cooled and equipped with nozzles in number superior, which allows the specification premixing of gas and air. In this how combustion occurs a temperatures lower than usual in a traditional burner. The burner consists of a surface on the which develops the high flame few millimeters, also called "microflame". The tube that passes through the burner with the return water from the system heating promotes cooling of the burner surface. Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

NB THE BOILER IS BORN WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Riello Open Chamber boiler mod. START 28 KI LN Low NOx LPG - NEW ErP 20151435 Product code: 20151435 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Thermal input: 31.90 kW Thermal power (80-60°C): 28.87 kW Reduced heat input: 14.00 kW Reduced thermal power (80-60°C): 12.36 kW Thermal input: 31.90 kW Reduced heat input: 9.00 kW Reduced thermal power: 7.95 kW Minimum operating pressure: 0.25-0.45 bar Quantity of hot water with Δt 25°C: 16.6 l/min Minimum domestic water flow rate: 2 l/min DHW temperature selection range: 37-60°C Flow regulator: 10 l/min NOx class: 6 Dimensions HxWxD 450x332x740 mm; Weight: 30 Kg Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service START 24 KI LN (LOW NOx) Start LN is characterized by a modern design despite its essentiality and is ideal for heating and the production of domestic hot water in small and medium-sized domestic users. Start LN is available in power ratings of 24 and 28 kW with low NOx emissions <56 mg/kWh. Characteristics: Double exchanger: domestic hot water production with plate exchanger for greater resistance to the formation of limescale CTR system for more rapid achievement of the desired comfort and a reduction in consumption and temperature changes in the heating bodies 8 liter expansion vessel Low consumption circulator (IEE≤0.20) Antifreeze function which protects the heating and DHW circuits down to 0°C Standard thermoregulation on the boiler board in combination with the external probe (optional) Can be interfaced with the Remote Control Panel Hydraulic connections available as an accessory kit Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service Electrical protection degree IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE AND THE TRANSFORMATION KIT WILL BE SUPPLIED WHICH IS NOT STANDARD. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE ARISTON GAS BOILER model CLAS X 24 CF LPG Low NOx OPEN CHAMBER Technical features Product code: 3301313 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency B XL withdrawal profile Technical specifications. Nominal heat input max/min (heating) PCI kW 25.8-11.0 Nominal heat input max/min (sanitary) PCI kW 27-11 Max/min useful heat output (heating) kW 23.2-9.8 Efficiency at nominal heat input PCI: 90.1% Efficiency at 30% of nominal flow rate PCI: 89.9% Max/min heating temperature: 82-35°C DHW max/min temperature: 60-36°C Port. specific in healthcare (10 min. with ΔT=30°C): 11.8 litres/min Quantity of hot water (ΔT=25°C): 14.2 l/min Quantity of hot water (ΔT=35°C): 10.2 l/min Minimum ambient temperature of use: 5°C Supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 52,1W Degree of protection of the electrical system IP X4D Dimensions 24 kW mm (HxWxD) 745 x 400 x 315 Power supply: methane or LPG Characteristics LCD display Continuous modulation high efficiency circulator Prepared for Ariston Net connectivity Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Copper finned primary exchanger Cold water inlet and heating return filters Low NOx emissions < 56 mg/ Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: LA CALDAIA NASCE A METANO, PER LA TRASFORMAZIONE A GPL BISOGNA CONTATTARE PREVENTIVAMENTE IL CENTRO ASSISTENZA DI ZONA PER CONOSCERE I RELATIVI COSTI Caldaia Chaffoteaux INOA ULTRA 25 CF Camera Aperta low NOx cod. 3310639 - NEW ErP Caratteristiche Tecniche: Potenza termica nominale max/min (Hi) Qn 25,8 / 11,0 kW Potenza utile riscaldamento max/min 23,2 / 9,8 kW Rendimento a potenza nominale 60/80 Hi 90,1% Rendimento al 30% della potenza nominale (ritorno 47 Hi) 89,9% Intervallo temperatura di uscita min/max temp. 35-82 °C Capacità vaso d’espansione 8l Acqua calda Sanitaria Livello di comfort ACS (EN 13203) ** Potenza max/min in regime ACS 24,3 / 9,9 kW Portata specifica in conformità a EN 625 a ΔT 30º C 11,8 l/min Portata acqua calda a ΔT 25º C 14,2 l/min Dati elettrici Tensione di alimentazione 230 V~ (50 Hz) Potenza massima assorbita 52W Grado di protezione elettrico IP X4D Dimensioni AxLxP 745x400 x319 mm; 25 Kg INOA ULTRA 25 CF   Inoa Ultra, dotata di display LCD multifunzione. racchiude nella sua semplicità tutte le caratteristiche tecniche necessarie per un funzionamento ottimale, garantendo prestazioni affidabili, pratiche e sicure. Basse emissioni di NOx: conforme alla normativa Erp del 26.09.2018 COMFORT SANITARIO Scambiatore sanitario in acciaio inox. Portata da 14,2 l/min con Δ=25°C . Circuito sanitario gestito da due sonde e un flussimetro sanitario per una migliore stabilità della temperatura in base al tipo di prelievo. COMFORT NEL RISCALDAMENTO Circolatore alta efficienza con modulazione continua per migliorare il comfort acustico e ridurre i consumi energetici. Potenza di riscaldamento di 25 kW. COMFORT D'USO E INSTALLAZIONE Display LCD con visualizzazione: storico, autodiagnosi, temperatura di funzionamento. Funzione antigelo. Compatta e perfettamente adattabile a qualunque tipologia di abitazione. Installazione rapida: predisposizione per l’utilizzo della barretta idraulica (opzionale). Manutenzione semplificata: accesso frontale a tutti i componenti. Predisposta per l’integrazione con sistemi solari termici. Predisposta per regolazione ambientale on/off con e senza fili. Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto

Read more less

Open Chamber Boiler Chaffoteaux Pigma Ultra 30 CF Low NOx Methane cod. 3310638 - NEW ErP Energy efficiency class for hot water production B XL load profile Product code 3310638 Nominal thermal power max/min 29.5/ 13 kW Expansion tank capacity 8l Nominal thermal power max/min (sanitary) PCI 29.5/ 13 kW Hot water flow rate at ΔT 25º C 15.8 l/min NOx class 6 Supply voltage 230 V~ (50 Hz) Electrical protection degree IP X4D Dimensions HxWxD 745x400x319 mm ULTRA PIGMA Thanks to the compact dimensions, the sanitary comfort guaranteed by the 2 performance stars and the digital display technology, which allows optimal management of the heating, it manages to create a comfortable environment, suitable for every type of need and installation. Low NOx emissions: compliant with the Erp regulation of 09.26.2018 HEALTHCARE COMFORT Sanitary heat exchanger in stainless steel. Domestic hot water performance **, according to EN 13203 standard. Flow rate from 14.2 to 15.8 l/min with ΔT = 25ºC. Controlled DHW production managed by two probes and a sanitary flowmeter for better temperature stability based on the type of withdrawal. Programmable on/off comfort function HEATING COMFORT SRA function, automatic boiler regulation system according to heating requirements. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Differentiated climatic thermoregulation of 2 circuits, according to the ambient and/or external temperature. Arrangement for integration into a heating system via the new Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). LCD display with display: history, self-diagnosis, operating temperatures. COMFORT OF USE AND INSTALLATION Compatible with Expert Control: intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. New intuitive electrical connections. Easier starting: automatic purge function and directly accessible combustion regulation. Compact and perfectly adaptable to any type of home. ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Up to 15% energy savings in combination with Expert Control, modulating room sensor and SRA function. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: ACTA NOX 24A Heating energy efficiency Class: C Sanitary Energy Efficiency Class: B Withdrawal profile: XL Heating/DHW nominal heat input: 26.0 kW Heating/DHW maximum useful power: 23.7 kW Yield name 60°/80°C: 91.3% Yield at 30% load: 92.6% Energy efficiency stars: (dir 92/42/EEC) ** NOx class: 6 Weighted NOx: 39 mg/kWh Minimum/maximum heating temperature: 38/85 °C Minimum/maximum heating pressure: 0.3/3.0 bar Capacity of the expansion tank (total): 8lt DHW minimum/maximum temperature: 35/60°C Maximum flow rate (ΔT=25 K) / (ΔT=35 K): 13.6 / 9.7 l/min Specific sanitary flow rate (ΔT=30 K): 11.2 l/min Voltage / Power at nominal heat input V~/ W: 230~/56 Degree of protection: IPX4D Minimum/maximum smoke temperature: 71 / 106°C Extremely compact dimensions hxwxd: mm 703x400x325 CNG or LPG power supply ACTA NOX ACTA NOX is the range of Savio boilers designed to meet modern housing needs that require reliable, compact and high performance products. The ACTA NOX range includes open chamber boilers with power ratings of 24 kW and 28 kW . The ACTA NOX series is suitable for heating and domestic hot water production. ACTA NOX has very compact dimensions which make it easy to place in any environment. Characteristics: High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel Water cooled low NOx burner High efficiency pump with low energy consumption Integration with SAVIO solar systems using a solar kit Digital control panel with display. The electronic card allows you to: Adjust the ignition pressure Adjust the restart frequency Manage the post-circulation of the high efficiency pump View fault diagnostics and lockout status. Also available : Boiler antifreeze safety Primary circuit thermal inertia disposal. Primary exchanger ACTA NOX features a water-cooled burner which allows to achieve high efficiency combustion and to limit the emissions of polluting substances. The burner is therefore characterized by a flame at a lower temperature than traditional boilers, which reduces the production of nitrogen oxides. Even the shape of the flame is specific to the water-cooled burner, in fact, it presents the flame in a uniform manner and with a reduced height. This makes ACTA NOx the SAVIO product that satisfies the needs of maximum domestic comfort and respect for polluting emissions. Secondary exchanger ACTA NOX is available in a mixed version for heating, domestic hot water production: the hot water is supplied at an adjustable and constant temperature thanks to the electronic modulation of the boiler. The DHW exchanger is made of stainless steel and has a low inertia which guarantees excellent performance. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Thermo-hydrometer for reading the water pressure on the primary side. Integration with solar ACTA NOX can be easily combined with a solar system using the Biasi solar kit. Simple and immediate to install, it does not require electrical parts and allows optimizing the integration of the solar system with the boiler which intervenes only when necessary to guarantee the required comfort temperature. Thermoregulation Hydraulic groups of innovative conception: Motorized 3-way valve Integrated automatic by-pass: allows the boiler to adapt to the needs of modern heating systems Absolute heating pressure switch: guarantees protection of the boiler in the event of a lack of water or circulation Sanitary flowmeter Easily accessible filling tap Drain tap Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: ACTA NOX 28A Heating energy efficiency Class: C Sanitary Energy Efficiency Class: B Withdrawal profile: XL Heating/DHW nominal heat input: 30.7 kW Heating/DHW maximum useful power: 27.6 kW Yield name 60°/80°C: 90% Yield at 30% load: 89.3% Energy efficiency stars: (dir 92/42/EEC) ** NOx class: 6 Weighted NOx: 28 mg/kWh Minimum/maximum heating temperature: 38/85 °C Minimum/maximum heating pressure: 0.3/3.0 bar Capacity of the expansion tank (total): 8lt DHW minimum/maximum temperature: 35/60°C Maximum flow rate (ΔT=25 K) / (ΔT=35 K): 15.8/ 11.3 l/min Specific sanitary flow rate (ΔT=30 K): 12.5 l/min Voltage / Power at nominal heat input V~/ W: 230~/56 Degree of protection: IPX4D Minimum/maximum flue gas temperature: 83 / 130°C Extremely compact dimensions hxwxd: mm 703x400x325 CNG or LPG power supply ACTA NOX ACTA NOX is the range of Savio boilers designed to meet modern housing needs that require reliable, compact and high performance products. The ACTA NOX range includes open chamber boilers with power ratings of 24 kW and 28 kW . The ACTA NOX series is suitable for heating and domestic hot water production. ACTA NOX has very compact dimensions which make it easy to place in any environment. Characteristics: High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel Water cooled low NOx burner High efficiency pump with low energy consumption Integration with SAVIO solar systems using a solar kit Digital control panel with display. The electronic card allows you to: Adjust the ignition pressure Adjust the restart frequency Manage the post-circulation of the high efficiency pump View fault diagnostics and lockout status. Also available : Boiler antifreeze safety Primary circuit thermal inertia disposal. Primary exchanger ACTA NOX features a water-cooled burner which allows to achieve high efficiency combustion and to limit the emissions of polluting substances. The burner is therefore characterized by a flame at a lower temperature than traditional boilers, which reduces the production of nitrogen oxides. Even the shape of the flame is specific to the water-cooled burner, in fact, it presents the flame in a uniform manner and with a reduced height. This makes ACTA NOx the SAVIO product that satisfies the needs of maximum domestic comfort and respect for polluting emissions. Secondary exchanger ACTA NOX is available in a mixed version for heating, domestic hot water production: the hot water is supplied at an adjustable and constant temperature thanks to the electronic modulation of the boiler. The DHW exchanger is made of stainless steel and has a low inertia which guarantees excellent performance. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Thermo-hydrometer for reading the water pressure on the primary side. Integration with solar ACTA NOX can be easily combined with a solar system using the Biasi solar kit. Simple and immediate to install, it does not require electrical parts and allows optimizing the integration of the solar system with the boiler which intervenes only when necessary to guarantee the required comfort temperature. Thermoregulation Hydraulic groups of innovative conception: Motorized 3-way valve Integrated automatic by-pass: allows the boiler to adapt to the needs of modern heating systems Absolute heating pressure switch: guarantees protection of the boiler in the event of a lack of water or circulation Sanitary flowmeter Easily accessible filling tap Drain tap Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE BAXI LUNA3 BLUE+ 240I CNG OR LPG BOILER - NEW ERP Technical features ErP energy efficiency class (heating and DHW): C - B Load profile: XL Open chamber with natural draft Heating/DHW nominal heat output kW 24 Nominal direct efficiency: 90.3% Heating circuit temperature range °C 30/85 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 13.7 Minimum domestic water flow rate I/min 2 Degree of protection IPX5D Dimensions (hxwxd): 763x450x345 mm ; 33 kgs Power supply: CNG or LPG Luna3 Blue+ Wall mounted compact gas boiler, natural draft - heating only and DHW production (low NOx)   Luna3 Blue+ is the Baxi compact natural draft boiler ideal for replacement. The extremely compact dimensions make this boiler particularly ideal for replacing old natural draft generators connected to branched collective flues, the only installation context allowed by the ErP directive for traditional open chamber boilers. The ErP/EcoDesign regulation in force since 26 September 2015 has forced manufacturers to place on the market products equipped with a high-efficiency pump (since 1 August 2015), which comply with the eco-compatible design requirements and bear an energy label. The legislation also provides that by way of derogation, producers can continue to produce and commercialize ONLY open chamber boilers for installations in domestic contexts, with the restriction of replacement in branched collective flues. Baxi's ranges of conventional B1-type natural draft boilers are precisely designed to meet all installation requirements in branched collective flues. Characteristics: Low NOx and CO emissions: class 5 according to EN 297 and EN 483 already compliant with the legislation that will come into force in 2018 Hydraulic group in brass Control panel with multifunction LCD display STANDARD climate control (with optional external probe) Arrangement for combination with the Baxi integrated solar system High efficiency circulation pump Antifreeze function and IPX5D degree of protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Wall mounted boiler Beretta open chamber MYNUTE 28 CAI LX METHANE code 20151436 low NOx Mynute S 28 CAI Product Typology: OPEN CHAMBER WALL BOILER Typology: Mural Use: Heating/Sanitary Boiler installation: Internal Accumulator (boiler): Instantaneous Heating nominal maximum useful power (kw): 28.80 Simple and intuitive digital display. Technical features: New boilers with low NOx emissions Low consumption circulator (EEI?0.20) as standard Specifically designed to facilitate the replacement of pre-existing wall-mounted boilers 9 liter expansion vessel Simple and intuitive digital display Predisposition for climatic thermoregulation (optional external probe)Predisposition for connection to the BeSMART Comfort control (code 20143539) IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps (optional) The ecological burner To reach high standards Mynute Low NOx is equipped with a special atmospheric burner, cooled and equipped with nozzles in number superior, which allows the specification premixing of gas and air. In this how combustion occurs a temperatures lower than usual in a traditional burner. The burner consists of a surface on the which develops the high flame few millimeters, also called "microflame". The tube that passes through the burner with the return water from the system heating promotes cooling of the burner surface. Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

Caratteristiche teniche Modello : KON B 28 Alimentazione : Metano Efficienza energetica Classe di efficienza stagionale in riscaldamento : A Classe di efficienza stagionale in sanitario : B Profilo di carico : XL Performance Potenza utile minima : 4,56 kW Potenza utile nominale : 28,50 kW Portata termica minima : 4,40 kW Portata termica massima : 28,00 kW Potenza massima assorbita : 86 W Rendimento utile al 30% del carico : 108,5 % Temperatura di funzionamento in riscaldamento : 30° ~ 85° C Temperatura regolabile in sanitario : 25° ~ 65° C Produzione di A.C.S miscelata con Δt 25 : 16 l/min Classe di rendimento : ★★★★ Classe di NOx : 5 Grado di protezione : IP X4D Emissioni di ossido di azoto NOx : 58 mg/kwh Dimensioni e peso Dimensioni (AxLxP) mm 900x680x486 Peso : 70,5 Kg Accessori di serie La caldaia viene fornita completa di: Dima predisposizione attacchi in lamiera, ordinabile anche separatamente (cod. 00363171) N° 1 circolatore modulante N° 4 tasselli per fissaggio caldaia Vaso di espansione del circuito sanitario di 3 litri (montato) KON B La nuova forma del comfort Raffinata caldaia murale a condensazione, KON B, offre una nuova forma del comfort. Nel suo DNA ha la piattaforma tecnologica KON, integrata all’“accumulo” da 60 litri superfast, in acciaio INOX AISI 316 L. È concepita per garantire docce confortevoli con erogazione a temperatura costante e per lungo tempo, senza risentire di “variazioni” causate dall’inserimento di altre utenze. Con l’accumulo a 70°C si dispone di ben 50 litri di acqua ad alta temperatura, miscelabili con acqua fredda, che forniscono oltre 195 litri nei primi 10 minuti con Δt 25K. L’erogazione dopo la scarica del bollitore prosegue per mantenersi a 45°C costanti nel tempo. L’utente potrà scegliere ovviamente la temperatura di consegna mediante il comando a bordo del pannello. La preparazione del bollitore avviene in circa 10 minuti da freddo e la ricarica, a partire da 45°C, in meno di 6 minuti. Il sistema di priorità sanitaria si basa sul pluritestato complesso con valvola a 3 vie elettrica. Un binomio hardware e software effi cientissimo, che consente il funzionamento in alta e bassa temperatura a priorità differenziate, abbinata all’eccellente gruppo scambiatore-condensatore premix, fornisce velocità di messa a regime dell’impianto di riscaldamento ed elevatissimo risparmio. Particolare attenzione è stata posta inoltre, alla riduzione delle emissioni sonore nonché all’isolamento del bollitore per evitare inutili dispersioni. KON B, la protagonista firmata Unical. Risparmio con lo scambiatore primario esclusivo in Al/Si/MgKON B impiega, come tutti i prodotti di ”Scuola Unical” un originale scambiatore primario. È realizzato in una speciale lega di Alluminio/Silicio/Magnesio che ne assicura effi cienza e resistenza tanto che è garantito da Unical ben 5 anni. Grazie alla confi gurazione di scambio termico interno si raggiungono rendimenti fi no al 108,2% (ex dir. 92/42) in regime di condensazione, che signifi cano per l’utente grande risparmio economico e ridottissimo impatto ambientale, per il miglior sfruttamento del combustibile.Ampia modulazione di potenza Questa dote permette di determinare, grazie al termostato e ai sensori di bordo, la giusta potenza istantanea necessaria, riducendo i fenomeni di on-off responsabili degli elevati consumi. L’omologazione in banda di potenza (Range Rated) dà l’opportunità di fi ssare la potenza erogata adeguandola all’esigenza dell’impianto. Il sistema “ANTIFAST” riduce ulteriormente i cicli di accensione e spegnimento ottimizzando rese e costi. Si tratta di un ritardatore elettronico di accensione che interviene dopo lo spegnimento della caldaia per raggiunta temperatura. Vantaggi: Rapidità di messa a regime all’accensione. Riduzione dei cicli on-off con diminuzione dei consumi e dell’usura dei componenti. Bruciatore premix modulante A controllo elettropneumatico e a rapporto di combustione costante, il bruciatore tipo “Flat” assicura lunga durata grazie alle basse sollecitazioni termiche e meccaniche ed all’inalterabilità fi sica del tessuto in fi bra FeCrAlloy, oltre ad una propagazione ideale del calore per irraggiamento grazie alla sua struttura capace di sviluppare una fi amma particolarmente morbida e luminosa. Lo sblocco “Quick release” sia della piastra superiore che del fondo dello scambiatore, permette la rimozione completa del sistema di combustione assieme all’ampiamente collaudato ed aggiornato complesso di elettronica e sistema di premiscelazione. L’elettrovalvola gas pneumatica ed il ventilatore, entrambi modulanti, si distinguono per il limitato ingombro. Vantaggi: compattezza e ridotta emissione acustica ampio range di modulazione 1:6,3 assoluta sicurezza d’esercizio per l’assenza di turbolenze La valvola è progettata per compensare le fluttuazioni di pressione del gas presenti nelle reti nonché stabilizzare la pressione di alimentazione indipendentemente dalla pressione di aspirazione generata dal ventilatore del premix. Facilmente regolabile, assicura una accurata miscela di combustione aria/gas (Low NOx) per garantire elevati tenori di CO2 e favorire la condensazione. Circolatore modulante al alta efficienza con disareatore Rappresenta lo stato dell’arte nello standard dell’alta effi cienza. In linea con la direttiva ErP del 2015, con meno di 1W di consumo in stand-by e soli 45W in funzionamento al massimo, grazie all’ampia capacità di modulazione, in base alla richiesta del termostato ambiente e alle temperature rilevate dai sensori posti in mandata/ritorno, dosa automaticamente la potenza della caldaia alle esigenze dell’impianto. Nella preparazione del bollitore di acqua sanitaria concorre positivamente a velocizzare i tempi e a ridurre gli on/off del bruciatore. Particolarmente silenzioso e compatto, si integra perfettamente con la valvola di sicurezza, il by-pass regolabile ed il rubinetto di scarico. Dentro al bollitore Capacità di 60 litri di accumulo, completamente flangiato, facilmente ispezionabile e coibentato in polistirolo autoestinguente. Acciaio INOX AISI 316 L Disposizione del serpentino acqua-acqua in 2 spirali concentriche estraibili disposte nella parte inferiore del bollitore. Si ottiene così il massimo scambio termico con l’acqua fredda in ingresso, che viene iniettata da uno speciale rompi flusso il quale riduce la turbolenza nella zona superiore ove avviene il prelievo di acqua calda Lunghezza del serpentino primario: 13 metri Superfi cie di scambio: 0,85 m2 Tempo di caricamento da 12 a 74°C: 10 minuti circa Rubinetto di svuotamento Efficienza energetica di riscaldamento dell’acqua ηwh pari al 68,1% secondo la dir. Erp, che ne fa un bollitore in grado di sostenere impegnativi ed intensivi prelievi anche protratti nel tempo. L’anodo di magnesio preserva dalle correnti parassite l’integrità del bollitore e ne conferma la garanzia di 5 anni. Acqua sana grazie all’antilegionella: l’utilissimo programma elettronico automatico prevede, ogni 186 ore, un ciclo ad alta temperatura (70°) che “sterilizza” il bollitore impedendo qualsiasi proliferazione batterica. Garanzia prodotto : La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less