Caldaia Riello FAMILY 25 KIS a condensazione completa di kit scarico fumi Low NOx Metano - NOVITA' RISCALDAMENTO Portata termica nominale kW 20,00 Potenza termica nominale (80°/60°) kW 19,48 Potenza termica nominale (50°/30°) kW 21,24  SANITARIO Portata termica nominale kW 25,00 Potenza termica nominale (*) kW 26,25 Rendimento di combustione % 97,8 CATEGORIA II2H3P Tensione di alimentazione V-Hz 230-50 Grado di protezione IP X5D  ESERCIZIO RISCALDAMENTO Pressione massima bar 3 Vaso d’espansione a membrana l 10 Dimensioni LxPxH mm 470x275x740 Classe energetica Riscaldamento/Sanitario A Family  La nuova gamma FAMILY nasce hybrid-ready, grazie all’intelligenza di sistema REC 10CH integrata nel pannello di controllo di serie. La caldaia è pertanto in grado di gestire in maniera integrata le sorgenti termiche a disposizione, senza necessità di controlli accessori. NON SERVE DECIDERE OGGICon FAMILY è possibile decidere di passare all’ibrido anche in un secondo momento, ampliando il sistema con pompe di calore, pannelli solari e bollitori/accumuli dell’offerta Riello, secondo le indicazioni a catalogo.ENERGY-SAVINGI sistemi ibridi consentono di ridurre i costi della generazione termica e le emissioni dannose in ambiente, grazie all’integrazione delle energie rinnovabili. FAMILY SI RINNOVA. IL TOP DI GAMMA DELL’OFFERTA MURALE RIELLO È IL RISULTATO DI UN NUOVO MODO DI PENSARE L’ENERGIA: EFFICIENTE, IBRIDA, GREEN. RISPETTOSA DELL’AMBIENTE PER IL MASSIMO RISPARMIO ENERGETICO, FAMILY È LA CALDAIA CHE STAVI CERCANDO, PER UN TOTALE COMFORT IN RISCALDAMENTO E IN SANITARIO. HYBRID READYFAMILY nasce hybrid ready, in grado cioè di gestire direttamente, senza necessità di accessori aggiuntivi, i componenti di un sistema multi-energia, in modo efficiente ed efficace.SCAMBIATORE IN ACCIAO INOXScambiatore primario in acciaio inox, con geometria a spira unica avvolta. Massima efficienza e affidabilità.ALTA EFFICIENZAMassimo comfort e minimi consumi, in riscaldamento ed in sanitarioSTABILITÀ DELL’ACQUA CALDA SANITARIANuovo scambiatore sanitario a piastre ottimizzato, per performance al top della categoria in termini di efficienza, stabilità della temperatura e tempi di attesa.INSTALLAZIONE SEMPLICE E VELOCECon FAMILY l’installazione e l’accesso ai componenti sono semplificati per ridurre al minimo tempo e faticaBASSE EMISSIONIFAMILY è certificata Classe 6 di NOx, la migliore prevista dagli standard europei. FAMILY è caratterizzata dal sistema di controllo di combustione elettronico evoluto, che monitora costantemente la combustione per ottenere consumi ed emissioni sempre ottimizzate.PANNELLO DI CONTROLLO CON NUOVA FUNZIONE IBRIDAGrazie all’intelligenza di sistema REC 10CH, integrata nell’elettronica della nuova FAMILY, la caldaia è in grado di gestire un sistema multi-energia, in modo semplice per l’utente e senza necessità di controlli accessori.  Garanzia Prodotto :  Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Technical features Heating ERP class A Healthcare ERP Class A Load profile XXL Heating capacity max / min kW 30.6 / 3.5 Max DHW heat input (Hi) kW 34.7 Max / min DHW thermal power kW 34.0 / 3.4 Efficiency 30% % 109.5 NOx emission class (EN 15502-1) - 6 Heating expansion vessel capacity 10 litres Sanitary flow rate ?t 25°C l/min 19.5 Protection degree (IEC 60529) IP X4D Dimensions HxWxD mm 700x420x320 Bluehelix HiTech RRT   The new user interface with «capsense» technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply. Thanks to the energy efficiency of the space heating ηs 94% among the highest in the category (Class A ErP, scale from G to A++) and to the combination with the Connect remote control, able to read the external temperature directly from the internet, reaches the system energy class A+ (scale from G to A+++). Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Thanks to the "Hydrogen plug-in" system, one of its most important innovations, it is already able to self-regulate to work with mixtures of natural gas and hydrogen, which will soon arrive in Europe, to combat global warming. Designed to fully satisfy the requests for a "robust" product from every point of view thanks to the high-passage primary exchanger capable of guaranteeing maximum efficiency and reliability over time also, and not only, as a replacement for old generators in particularly dirty systems . Silence at the top The particularly careful design of BLUEHELIX HITECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. It will be difficult to realize whether the boiler is on or off from its noise, as on older generations of boilers, because even the on/off transients have been optimized according to acoustic comfort. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections Characteristics Boiler with thick stainless steel primary exchanger , with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt thanks to the combination with the CONNECT modulating remote control and the reading of the external temperature directly from the internet, it reaches the maximum energy efficiency A+ (scale from G to A+++) Class 6 NOx: already in line with the provisions of the ErP regulation from 26.09.2018 (NOx emissions < 56mg/kWh) MC2: Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) MGR: Methane LPG Ready, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door (without insulators): simplifies maintenance and reduces its cost thanks to fewer perishable parts Instantaneous production of DHW with dedicated DHW plate heat exchanger (only for version C) Hydraulic connections covered by the boiler casing Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems ECO function in DHW for greater savings in the period of low use of hot water (only for version C) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (only for methane operation) Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the aid of the optional antifreeze heater kit Boiler control The new user interface with ''capsense'' technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply, customizing the operation of the appliance in so as to manage the environmental comfort according to one's needs. Thanks to the remote connection via bus, this can also be done directly from the CONNECT remote control, even via smartphone. The boiler is also set up to connect a second room thermostat to dedicated terminals to manage multi-zone systems. TOP EFFICIENCY Even on old systems (replacements) The BLUEHELIX HITECH RRT heat exchanger THERMOBALANCE™ (fig. A) compared to the more classic and widespread steel exchanger (fig. B) also used in the past by the Ferroli Group exclusively on a small series of boilers produced for the market English, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in the Bluehelix models (2012 -> ). This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig . B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values MC2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). EASY MAINTENANCE Trouble-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance"TM thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels. The electrical box of the electronic card can be easily extracted from the chassis leaving free access to the internal parts. - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger group. The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections. Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caratteristiche tecniche Modello : Residence IN 25 KIS Codice prodotto : 20189650 Potenza nominale : 19,0 kW Alimentazione : Metano/gpl Efficienza energetica Classe di efficienza energetica stagionale del riscaldamento : A Classe di efficienza energetica del sanitario : A Efficienza energetica stagionale del riscaldamento : 93% Consumo energetico annuo : 42 GJ Potenza termica utile Potenza termica nominale e a regime di alta temperatura : 19,4 kW Potenza termica nominale e a regime di bassa temperatura : 6,5 kW Efficienza utile Alla potenza termica nominale e a regime di alta temperatura : 87,3 % Al 30% potenza termica nominale e a regime di bassa temperatura : 98,5 % Consumi elettrici ausiliari A pieno carico : 32,0 W A carico parziale : 12,0 W In modalità Stand-by : 3,0 W Performance in riscaldamento Portata termica : 3,95 ~ 25 kW Pressione massima : 3 bar Temperatura massima : 90° C Performance in sanitario Portata ACS minima : 2 l/min Pressione massima : 8 bar Produzione ACS : 10,2 ~ 11,9 ~ 14,3 kW Dati installativi Diametro tubo entrata / uscita riscaldamento : 3/4" Diametro tubo entrata / uscita sanitario : 1/2" Dimensioni e peso Dimensioni (AxLxP) : 740x420x249 mm Peso : 31,0 Kg Caldaia murale a condensazione Riello RESIDENCE IN La soluzione efficiente, dove lo spazio fa la differenza Residence In è la soluzione Riello pensata per le esigenze installative in cui lo spazio fa la differenza e per un comfort senza compromessi. Residence In si distingue per compattezza, flessibilità applicativa e ampia disponibilità di accessori che garantiscono la compatibilità e retrocompatibilità anche nei box Riello più piccoli.  Lo scambiatore primario, interamente realizzato in acciaio inox e con accessibilità frontale alla camera di combustione, e lo scambiatore a piastre ottimizzato assicurano la massima efficienza e affidabilità nel tempo e garantiscono un comfort elevato, sia in riscaldamento che in sanitario Con RESIDENCE IN, Riello continua il percorso di rinnovamento della propria offerta murale in chiave eco-compatibile. L’ampio range di modulazione 1 : 8, le bassissime emissioni di NOx, che posizionano la gamma in Classe 6 (la migliore secondo gli standard europei), e la predisposizione per il funzionamento con miscele di gas naturale e idrogeno – fino a un massimo del 20% - sono solo alcune tra le caratteristiche che qualificano RESIDENCE IN come la caldaia ideale per un’installazione di valore nel tempo, dal minimo impatto ambientale ed estetico. Installazione universale Massima flessibilità installativa sia all’interno, all’esterno (in luogo parzialmente protetto) e a incasso in box Stabilità di acqua calda sanitaria Acqua calda senza oscillazioni di temperatura, per un comfort ottimale durante i prelievi Interfaccia digitale  Interfaccia dal design moderno, che si distingue per l’intuitività di utilizzo, comunicando con l’utente per mezzo di icone e testi scorrevoli. Basse emissioni La migliore in termini di rispetto ambientale a livello europeo Compattezza e flessibilità per un'installabilità universale RESIDENCE IN è la soluzione ideale per la sostituzione, oltre che per la nuova edilizia. Le dimensioni ridotte del prodotto, unitamente alla disponibilità di una gamma articolata di kit accessori per ogni tipo di applicazione, facilitano e velocizzano l’installazione, anche in piccoli box pre-esistenti. RESIDENCE IN, come suggerisce il nome, è la nuova caldaia Riello pensata in primis per l’installazione a incasso in box. Grazie alle ridotte dimensioni e alla disponibilità di una gamma dedicata di kit accessori, RESIDENCE IN è compatibile e retrocompatibile con le varie tipologie di box Riello. La nuova soluzione Riello, in caso di sostituzione di un modello a incasso, assicura all’utente un notevole risparmio, evitandogli sia l’acquisto di un nuovo box, che eventuali spese murarie per adeguare lo spazio della nicchia. Inoltre, gli attacchi idraulici con sequenza Riello rendono la sostituzione con le vecchie caldaie ancor più facile e immediata. L’installabilità a incasso è un plus anche per la nuova edilizia, permettendo di risparmiare spazio sempre più prezioso all’interno dell’abitazione e riducendo al minimo l’impatto estetico in facciata. Adatta per l'esterno RESIDENCE IN, grazie al grado di protezione IPX5D e al kit accessorio antigelo fino a -15°C, può essere installata anche all’esterno dell’abitazione, in luogo parzialmente protetto. Design moderno e utilizzo intuitivo RESIDENCE IN è dotata di un pannello di controllo dalle linee razionali e moderne, che si distingue per la semplicità di utilizzo. Attraverso il display LCD retroilluminato, che comunica con l’utente mediante icone e testi scorrevoli, è possibile accedere facilmente a tutte le funzioni di RESIDENCE IN. Un cuore d'acciaio per la massima efficienza RESIDENCE IN è dotata di un nuovo scambiatore primario in acciaio INOX, con tubo liscio ad elevata sezione, in grado di assicurare la migliore efficienza e pulizia nel tempo. L’acciaio INOX, oltre all’elevata resistenza all’azione corrosiva della condensa acida, previene la formazione interna di ossidi e di altri fenomeni elettrochimici tipici delle installazioni in vecchi impianti. La geometria a spira unica avvolta (circuito idraulico in serie) assicura una portata costante in tutte le sezioni dello scambiatore e previene intrinsecamente fenomeni di intasamento. L’accesso frontale agevola le operazioni periodiche di manutenzione e pulizia della camera di combustione. Comfort sanitario elevato Grazie al nuovo scambiatore a piastre high performance, RESIDENCE IN offre un elevato comfort in sanitario, con disponibilità di acqua calda in tempi brevi e un’ottima stabilità della temperatura di erogazione. Funzionamento silenzioso RESIDENCE IN, distinguendosi per la silenziosità operativa, rappresenta la scelta ottimale anche per l’installazione in locali non tecnici, ad esempio in caso di sostituzione in una cucina. Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE  LA CALDAIA VIENE FORNITA A METANO. PER LA TRASFORMAZIONE A GPL, RIVOLGERSI PREVENTIVAMENTE AL SERVIZIO ASSISTENZA AUTORIZZATO Caldaia Junkers Bosch Condens 4300 W GC4300W 24/25 C 23 a condensazione con di kit scarico fumi Caratteristiche Tecniche Dati del prodotto per il consumo energetico (ErP), secondo requisiti dei regolamenti UE n. 811/2013 e 812/2013 e s.m.i. a completamento della direttiva 2017/1369/UE C4300i W 24/25 Classe di efficienza energetica di riscaldamento (A+++ → D) A Classe di efficienza energetica di riscaldamento dell’acqua (A+ → F) A - Potenza termica nominale kW 24 Profilo di carico dichiarato XL - Efficienza energetica stagionale del riscaldamento d’ambiente ηs* % 94 Dati tecnici Portata termica nominale (Qn) di riscaldamento kW 3,2-24,6 Potenza termica nominale (Pn) 80/60 °C kW 3-24 Potenza termica nominale (Pcond) 50/30 °C kW 3,3-24,7 Portata termica nominale massima acqua calda sanitaria (Qn,maxWW) kW 25,5 Portata specifica secondo EN 13203-1/2 (ΔT = 30 K) l/min 11,9 Rendimento utile alla potenza massima ηu,Hi,100% 50/30 °C % 103,1 Rendimento utile alla potenza massima ηu,Hi,100% 80/60 °C % 97,6 Rendimento utile alla potenza minima ηu,Hi,30% 50/30 °C % 107,5 Rendimento utile alla potenza minima ηu,Hi,30% 80/60 °C % 98 Capacità vaso espansione riscaldamento l 6 Classe NOx (secondo EN 15502/1) 6 Grado di protezione elettrica IP X5D Potenza sonora dB(A) 45 Peso kg 35,25 Dimensioni (LxAxP) mm 400x710x300 Condens 4300 W Un’installazione così semplice non l’hai mai provata prima Grazie ai nuovi attacchi idraulici, Condens 4300i W è la caldaia a condensazione ideale per la sostituzione e l’ammodernamento di qualsiasi modello di caldaia a gas. Così, ai tuoi clienti proponi qualità ed efficienza, e tu ti assicuri un lavoro semplice e veloce. Perfetta per gli interventi di sostituzione Con nuovi attacchi idraulici che distano ben 11 cm dal muro, Condens 4300i W è la scelta ideale in casodi ristrutturazione e per completare i lavori di sostituzione in tutta semplicità e in poco tempo. Inoltre, questa caldaia non necessita dello spostamento dello scarico fumi, perché è possibile mantenere il foro pre-esistente. L’ampia gamma di modelli di scarico fumi Bosch, disponibile in diverse lunghezze, consente di scegliere anche il nuovo scarico fumi con sdoppiatore compatto (disponibile come accessorio).Trova spazio in ogni contestoCondens 4300i W è pensata per trovare spazio ovunque e adattarsi a diversi contesti abitativi, risultando ancora una volta la scelta ideale per i lavori di ammodernamento. Le sue dimensioni estremamente compatte (con soli 30 cm di profondità, 40 cm di larghezza e 71 cm di altezza) fanno sì che possa trovare spazio in ogni ambiente domestico, anche all’interno dei pensili. Il peso estremamente contenuto, con soli 35 chili, ne conferma ancora una volta la grande praticità di installazione.Altamente efficiente, estremamente silenziosaSemplicità di installazione, dimensioni compattem e peso contenuto: cosa chiedere di più? Condens 4300i W è la soluzione perfetta anche per la sua grande silenziosità di funzionamento, per cui la sua presenza passa praticamente inosservata! Con una potenza sonora di 45 dB(A), Condens 4300i W c’è, funziona alla perfezione, ma non si sente!  Modernità e robustezza, la scelta ideale per le ristrutturazioniCondens 4300i W è funzionale e moderna sotto ogni aspetto, sia a prima vista che al suo interno. Componenti di alta qualità, design elegante e affidabilità nel tempo, uniti alla semplicità di installazione, la rendono la scelta ideale per i progetti di ammodernamento in ogni tipo di abitazione I principali vantaggi Nuovi attacchi idraulici distanti 11 cm dal muro Possibilità di mantenere il foro esistente dello scarico fumi Dimensioni ultra compatte e peso contenuto Elevata efficienza garantita dall’ampio range di modulazione fino a 1:10 Comfort sanitario a 3 stelle, il massimo ottenibile secondo la normativa EN13203-1/2 Elevata silenziosità di funzionamento con soli 45 dB(A) di potenza sonora Controllabile tramite display LCD o da remoto tramite app Consente di accedere agli incentivi fiscali previsti per l’efficientamento dell’impianto di riscaldamento Il riscaldamento domestico a portata di manoCondens 4300i W è facile da controllare tramite l’intuitivo display LCD, ma non solo: grazie alla compatibilità con un’ampia gamma di regolazioni, gestire questa caldaia è semplicissimo! Un’ampia gamma di regolazioni per incrementare l’efficienza energeticaCondens 4300i W dispone di un display LCD che consente all’utente di regolare con facilità tutte le impostazioni di base della caldaia. Inoltre è compatibile con un’ampia gamma di termoregolazioni.Questo consente di: mantenere la regolazione pre-esistente sostituire la vecchia regolazione con un modello Bosch abbinato ad una sonda esterna, in modo da incrementare l’efficienza energetica del sistema di riscaldamento e ridurre i consumi. La scelta della regolazione impatta sugli incentivi fiscali a cui è possibile accedere. Consumi ridotti e prestazioni al top: installa solo il meglio! Condens 4300i W, grazie all’ampio range di modulazione e all’elevato rendimento stagionale, è sinonimo di efficienza energetica e consumi ridotti. Così, non solo il tuo lavoro è subito fatto, ma sei certo di aver offerto ai tuoi clienti solo il meglio della tecnologia Bosch! Comfort domestico sempre al topIl bruciatore modulante di Condens 4300i W, con range fino a 1:10, si adatta in automatico al reale bisogno di calore del momento, raggiungendo un’elevata efficienza stagionale per il riscaldamento d’ambiente con valori fino al 94%. Questo, per il cliente, si traduce non solo in un elevato comfort domestico, ma anche in consumi ridotti e costi di riscaldamento più contenuti.Acqua calda sanitaria subito disponibileL’elevata efficienza di Condens 4300i W è anche garanzia di tanta acqua calda sanitaria a temperatura costante con tempi di attesa davvero ridotti. Così, con un comfort sanitario a 3 stelle, il massimo ottenibile secondo la normativa EN13203-1/2, la soddisfazione desl cliente è garantita! Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Biasi rinNova adaptive 25s low NOx condensing boiler complete with methane or LPG fume exhaust kit Heating/DHW nominal heat input kW 21.0 / 26.0 Heating/DHW minimum heat input kW 3.0 / 3.0 Heating/DHW maximum useful power 60°/80°C * kW 20.7 / 25.6 Heating/DHW minimum useful power 60°/80°C * kW 2.8 / 2.8 Heating/DHW maximum useful power 30°/50°C ** kW 22.8 / 28.2 Heating/DHW minimum useful power 30°/50°C ** kW 3.2 / 3.2 Yield name 60°/80°C * % 98.4 Yield min. 60°/80°C * % 94.0 Yield name 30°/50°C ** % 108.6 Yield min. 30°/50°C ** % 105.2 NOx class 6 Minimum/maximum heating pressure bar 0.3 / 3 Expansion tank capacity (total/useful) l 7 Maximum flow rate (ΔT=25 K) / (ΔT=35 K) l/min 15.4 / 10.7 Specific sanitary flow rate (ΔT=30 K) ***** l/min 12.8 Voltage/Power at nominal heat input V~/ W 230 / 100 Power at minimum thermal capacity W 52 Degree of protection IPX5D Height x Width x Depth mm 700 x 400 x 300 Weight kg 31.5 Boiler water content 2.0 l Code 20312.0221.0 RinNova adaptive The RinNova Adaptive condensing boiler , unlike traditional boilers, allows you to recover energy by condensing the water vapor contained in the exhaust fumes; that is, for the same amount of heat produced, it consumes less gas and furthermore the exhaust fumes contain fewer substances which are harmful to the environment. The materials that compose it and the regulation systems with which it is equipped offer safety, high comfort and energy savings, so as to be able to fully appreciate the advantages of autonomous heating. RinNova Adaptive is the new BIASI model of wall-mounted condensing boiler . It offers excellent performance and high yields that last over time, thanks to the innovative heat exchanger . Simple to use thanks to the digital control panel, with a display designed to communicate with the user easily and comfortably. Technical features Boiler with single circuit primary exchanger in stainless steel, without joints and/or welds, which maintains high efficiency even on older systems New combustion system with patented gas-adaptive technology (Advanced Adaptive Gas Combustion Control – A²GC²) The electronics continuously analyze the combustion (CO2) through the flame signal and intervene by acting on the gas valve and fan, to allow correct combustion in all terms of use. The electronics allow the boiler to be easily adapted to the various types of gas without having to intervene with a mechanical transformation kit Instant production of domestic hot water with dedicated plate exchanger Domestic hot water pre-heating function: faster delivery of domestic hot water User interface with display and multifunction keys for adjusting and setting the parameters Easy to inspect standard by-pass Chimney Protection System: electronic management of fume overheating, guaranteeing maximum protection of the chimney Ducting on flues: particularly suitable for operation in flues that require ducting with high pressure drops Minimum polluting emissions (class VI - EN 15502-1) Sliding temperature operation via optional external probe Low consumption modulating heating pump (ErP Ready - Class A) Digital flame control with three re-ignition attempts in the event of blocking due to lack of flame detection (methane configuration) Removable casing in three pieces for easier maintenance or inspection For SV versions: possibility of setting the maximum power that can be supplied to the external boiler Gas-adaptive technology Less consumption, more efficiency, fewer emissions The innovative Adaptive Gas technology, which all models in the Rinnova line are equipped with, allows the boilers to be adapted in complete autonomy to the different types and qualities of gas. The electrode, in addition to detecting the flame, also detects the characteristics of the gas and automatically adapts the combustion parameters to maintain the maximum level of efficiency, with a consequent reduction in consumption and emissions compared to traditional control systems. The Adaptive gas system makes the boiler ready to operate with any type of gas without transformations. Automatic gas regulation Adaptation to changing gas quality Clean combustion The only model suitable for methane and LPG which allows you to optimize the warehouse In traditional boilers, the combustion values ​​are detected and adjusted only during maintenance, furthermore the composition of the gas network is not always constant and can create operating inefficiencies on boilers without combustion control devices, compromising reliability, savings and the quality of emissions. Thanks to the Gas-Adaptive system, the new condensing boilers electronically control combustion by managing the gas and air supply at best and at all times, automatically adapting the CO2. A "Plastic-FREE" production For a more sustainable environment A fundamental element that guided the entire design phase of the new Rinnova Adaptive boiler is the strong focus on the circular economy. For this we have used components with a higher rate of recyclability, eliminating the use of plastic as much as possible. The plastic group, for example, has been replaced with the brass group, a completely recyclable material. The protective shells of the boiler were made of cardboard and no longer of polystyrene. Furthermore, the front is no longer in plastic but in pressed steel. Thermoregulation Climatic regulation (with optional external probe) and ambient regulation (remote) to allow correct management of the water temperature in order to reduce consumption and consequently a reduction in emissions. By using the climatic regulation, the regulation efficiency also rises, giving greater value to the home. High circulation single coil primary heat exchanger Biasi, introduces the Round heat exchanger in 2017. The great reliability has been demonstrated by adopting it in the Renew Adaptive range. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single stainless steel strip to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit The ease of cleaning and the robustness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations. Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 26 CS/1-5 Article code : 0010022020 Power supply: methane or LPG Performance Heating power : 3.0 ~ 25.0 kW DHW power : 3.0 ~ 26.0 kW Withdrawal flow rate (ΔT = 30K) : 12.6 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 103.4% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 34.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta MYNUTE X BOX 25 C Low NOx condensing boiler complete with flue gas kit 20189653 Methane for indoor and outdoor Wi-Fi optional - NEW Boiler code 20189653 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Declared load profile XL NOx emission class 6 HEATING EXERCISE Max pressure-temperature bar-°C 3-90 Pump: maximum head available (at a flow rate of 1000 l/h) mbar 340 Expansion tank capacity l 8 HEALTHCARE EXERCISE Max pressure bar 8 DHW production at ?T= 25 °C / 30 °C / 35 °C l/min 14.3/11.9/10.2 Minimum DHW flow l/min 2 DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 35 kgs MYNUTE X YOUR SPACE, YOUR RELAXATION, YOUR COMFORT. WITHOUT COMPROMISES. Beretta presents Mynute X Box , the most compact condensing boiler in its offer and among the most compact on the market. With a depth of only 249 mm (25kw model), Mynute X Box it is ideal for replacement, specifically built-in, even in pre-existing, small-sized boxes. The range is distinguished by the application flexibility, as it can also be installed inside the home and externally (in a partially protected place) . In each type of application envisaged, MYNUTE X BOX ensures the user a uncompromising comfort , both in heating and in DHW, thanks to new primary heat exchanger in stainless steel and to the exchanger optimized plate sanitary ware , in continuity with the renewal process of the Beretta wall platform. The aesthetics, in line with the revisited Beretta style of the latest generation boilers, easily integrates into both indoor and outdoor environments. The wide modulation range 1 : 8 , le very low NOx emissions , which place the range in Class 6 (the best according to European standards), and the provision for operation with mixtures of natural gas and hydrogen - up to a maximum of 20% - confirm Beretta's renewed green awareness, which translates into the development of efficient, high-performance products with a low environmental impact. DIGITAL INTERFACE, MODERN AND INTUITIVE MYNUTE X BOX is equipped with an interface with soft lines, in line with the Beretta aesthetics of the latest generation models, which stands out for its ease of use . Through a modern backlit LCD display , which communicates with the user through icons and scrolling texts (multilingual), you can access all the functions of MYNUTE X BOX. THE 7 silk-screened operating keys they allow you to navigate the panel in a simple and intuitive way, accessing the settings and parameterizations of the boiler and the system. New smoke flange with quick-tightening safety collar Low emissions : class 6 (UNI EN 15502) Modulation 1 : 8 Expansion tank 9 l (30 kW models) Low consumption modulating circulator (EEI = 0.20), with a head curve of 6 metres Excellent silence of operation Degree of electrical protection IPX5D Hydraulic group with Beretta attacks sequence, ideal for replacement Dima in support Complete range of accessories for any type of application , in particular for recessed in boxes. THE specific accessory kit for recessing they are designed to be used in combination with the 'compact magnetic water filter' and 'compact polyphosphate dispenser kit' accessories. Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER UNICAL KON M C24 CONDENSING LOW NOX COMPLETE WITH LPG FUME KIT Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power kW 23.6 Seasonal heating energy efficiency ambient ηs 92% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 12.7kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 87% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 4.2kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 96.7% Annual electricity consumption QHE GJ: 40 Heating energy efficiency. of water ηWH: 86% Daily fuel consumption Qfuel : 22.0 kWh Sound power level indoors Lwa dB(A) 51 Annual electricity consumption AEC: 400kWh Domestic hot water specific flow rate (Dt 30 °C): 11.2 l/min DHW production in cont. Dt 25 K (mixed): 13.2 l/min Expansion tank capacity: 8 lt Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345 mm; 36.5kg KONm the latest generation of domestic condensing boilers by Unical, available in the version: instant combo heating only combinable with DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion The details of konm... Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility. Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less

AVAILABLE TO ORDER Hermann Saunier Duval Themafast Condens 25 CS/1 Methane boiler complete with low NOx fume exhaust kit - New Model: Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating Fireplace flow rate Qmin/max - 80/60°C kW 3.1 - 20.4 Sanitary Specific flow rate (∆T = 25K) (EN13203) l/min 14.8 Peak flow rate in 10 minutes (∆T = 30K) l/10 min 123 Dimensions (HxWxD) 740x418x344 ThemaFast Condens All the comfort, immediately. Characterized by a renewed design with modern and essential lines, flat casing to facilitate installation in the home and touch-screen user interface, the new ThemaFast Condens range is positioned at the top of its category in terms of sanitary comfort and consumption reduction . The exclusive Aquaspeed FAST® system and the new 3-litre micro-accumulator ensure immediate delivery of domestic hot water - even in the case of minimal withdrawals - and maximum temperature stability. The new FlameFit® combustion technology is able to autonomously adapt to the different types of gas, always managing to generate perfectly efficient combustion in total safety. The range consists of three models of 25, 30 and 35 kW with methane fuel, convertible to propane through simple electronic regulation. Hydraulic connections and dimensions are unchanged compared to the previous version Superior sanitary comfort New 3 liter microaccumulator Immediate delivery of domestic hot water Maximum temperature stability New FlameFit® combustion technology High modulation up to 1:9 Modern design with touch-screen user interface New diagnostics and malfunction detection Aquaspeed FAST® and new microaccumulator: unique comfort Thanks to the exclusive Aquaspeed FAST ® technology , the domestic hot water is stored in a 3-litre micro-accumulator which guarantees the immediate availability of hot water without the temperature fluctuations typical of the first delivery phase. The new micro-accumulator, made of stainless steel and composite material, is insulated with two expanded polystyrene shells to reduce heat losses in stand-by. Externally, a small resistance (max 25 W) keeps the water always at the desired temperature, avoiding costly multiple ignitions of the burner in case of low flow rate withdrawals. When the withdrawal is greater than 1.7 litres/min, the boiler starts up and, through the instantaneous DHW exchanger, goes into continuous production according to the user's requests. At the end of the withdrawal, the micro-accumulator is already at the set temperature, ready for the next request. FlameFit® technology: more efficiency, less consumption and emissions The innovative FlameFit® combustion technology with which all ThemaFast Condens models are equipped allows the boiler to be independently adapted to the different types and qualities of gas, always guaranteeing optimized and fully safety. In fact, the flame control electrode detects the varied characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting the operation of the boiler to the actual needs of the user, with consequent energy savings, reduction of consumption as well as polluting emissions . FlameFit® technology makes ThemaFast Condens ready for operation with any type of future gas, without the need for conversion kits. New touch screen user interface The interface of the new ThemaFast Condens has a modern digital touch display and has been designed to simplify boiler management by the user as much as possible. The symbology of the various keys and the "talking messages" that can be viewed on the display allow for a rapid understanding of the main functions and how to set parameters according to one's comfort needs. All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Immergas VICTRIX TERA 24 V2 low nox LPG condensing boiler complete with flue gas exhaust kit General characteristics Model: VICTRIX TERA 24 V2 Power supply: LPG Heating Energy Efficiency Class: A Sanitary Energy Efficiency Class: A Sanitary nominal thermal power (useful): 28.0 kW Heating nominal heat output (useful): 24.0 kW Technical data sheet (Method Directive 92/42/EEC) Burner type: Blown air Power at rated load: 24.0 kW Power at 30% of nominal load: 7.2 kW (at 50/30 °C) Efficiency at nominal load: 106.5 Efficiency at 30% of nominal load: 107.5 (at 80/60 °C) Efficiency at nominal load: 97.8 Efficiency at 30% of nominal load: 96.8 Electric auxiliaries at rated load: 41 W at intermediate load: 60 W at zero load: 2 W Operating temperatures Average temperature: 50°C Return temperature: 40°C DHW temperature: 55°C With DHW priority: yes TEST conditions at nominal load Average temperature of the generator: 70 °C Yield correction factor: 0.2 at intermediate load Average temperature of the generator: 70 °C Yield correction factor: 0.2 at zero load Power lost: 54.4W Mantle loss fraction: 0.36 Dimensions Legend: V - Electrical connection G - Gas supply AC - Domestic hot water outlet ACV - Kit domestic hot water inlet solar valve (optional) AF - Domestic hot water inlet SC - Condensate drain (internal diameter minimum Ø 13 mm) M - System delivery R - System return Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. OPERATION WITH LPG THROUGH REGULATION BY THE AUTHORIZED ASSISTANCE CENTER. FOR INFORMATION, CONTACT YOUR LOCAL BAXI ASSISTANCE IN ADVANCE Baxi Luna Duo-tec E 33 Low NOx condensing boiler complete with flue gas exhaust kit for methane or LPG Technical Features Type: Wall-mounted condensing boiler; Model: Luna Duo-Tech Compact E; Energy efficiency class: A; Load Profile: XXL; Power supply: Methane/LPG Gas Adaptive Control; Warm-up Performance: Nominal heating heat output: 28.9 kW; Reduced heat output: 4.8 kW; Useful heat output at rated heat output and high temp. regime* P4: 28 kW; Useful thermal power at 30% nominal thermal power and low temp. mode** P1: 9.4 kW; Minimum operating temperature: -5°C; Expansion vessel capacity: 10 l; Heating circuit water temperature regulation: 25-80°C; Min/max pressure of heating circuit water: 0.5/3 bar; Performance in Healthcare: Nominal domestic hot water heat output: 34 kW; Nominal domestic hot water heat output: 33 kW; Domestic hot water temperature regulation: 35-60 °C; Domestic hot water production ?T 25°C: 18.9 l/min; Minimum water flow rate in the sanitary circuit: 2 l/min; Yields: Useful efficiency at rated thermal power and high temperature regime: 88.1 %; Useful efficiency at 30% rated thermal power and low temperature regime: 98.1 %; Useful efficiency (lvf) Pn - average temperature 70°C: 97.8 %; Useful efficiency (lvf) at 30% - return temperature 30°C: 108.9%; Intermediate useful efficiency (lvf) - average temperature 70°C: 98.2 %; Rated electrical power: 106 W; Auxiliary electricity consumption in stand-by mode: 0.003 kW; Nitrogen oxide emissions NOx: 15 mg/kWh; Sound power level, inside: 53 dB; Dimensions: (HxWxD): 763x450x345 mm; Weight: 39.5 kg; Luna Duo-tec General Features New modern and elegant design for the entire range Wide modulation range up to 1:7 (1:6 mod. 1.12) greater efficiency and silence GAC (gas adaptive control): automatic combustion control Digital control panel with large backlit LCD display Predisposition for combination with the Baxi integrated solar system Connection to Ø50 mm rigid and flexible exhaust pipe: solution for chimney restoration - for the 24 kW model Total length 40 meters (intake + exhaust) Hydraulic system Electric three-way diverter valve (also heating only models) Stainless steel premix burner Stainless steel water/fume exchanger Increased sanitary exchanger in stainless steel which allows the boiler to condense even in sanitary operation Electronically variable modulating fan of speed Automatic bypass High efficiency circulation pump with total modulation Anti-lock brake system pump and three-way valve which intervenes every 24 hours Heating circuit safety valve at 3 bar Thermoregulation system Climate control as standard (with external probe available as an option) Provision for connection to a zone system Control system safety thermostat against overtemperatures of the water/flue gas exchanger Hydraulic pressure switch that blocks the gas in case of lack of water NTC safety probe against flue gas overtemperatures Temperature control using NTC probes Total antifreeze device Electronic thermometer Digital pressure gauge heating circuit Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

Caratteristiche tecniche Modello : Family 30 KIS Codice prodotto : 20187644 Alimentazione : Metano Efficienza energetica Classe di efficienza energetica riscaldamento : A Classe di efficienza energetica sanitario : A Riscaldamento Portata termica nominale : 25,00 kW Potenza termica nominale (80°/60°) : 24,33 kW Potenza termica nominale (50°/30°) : 26,50 kW Sanitario Portata termica nominale : 25,00 kW Potenza termica nominale : 31.50 kW Rendimento di combustione : 97,6%  Performance Pressione massima : 3 bar Vaso d’espansione a membrana : 10 litri Dimensioni e peso Dimensioni (LxHxP) : 470x740x350 mm Peso : 40,0 Kg Caldaia a condensazione Riello Family La sintesi perfetta di performance e sostenibilità La nuova Family è la soluzione Riello per l'utente più esigente. Lo scambiatore primario, interamente realizzato in acciaio inox e con accessibilità frontale alla camera di combustione, garantisce la massima efficienza ed affidabilità nel tempo ed il nuovo scambiatore sanitario ottimizzato assicura un comfort eccezionale e la migliore classe di merito Hibrid Ready FAMILY nasce hybrid ready, in grado cioè di gestire direttamente, senza necessità di accessori aggiuntivi, i componenti di un sistema multi-energia, in modo efficiente ed efficace. Controllo di sistema Il pannello di controllo della nuova gamma FAMILY, attraverso il suo display a colori, semplice e intuitivo, integra ora anche la funzione di gestione diretta di un sistema multi-energia, senza la necessità di controlli esterni accessori. Scambiatore in acciaio inox Scambiatore primario in acciaio inox, con geometria a spira unica avvolta. Massima efficienza e affidabilità. Basse emissioni FAMILY è certificata Classe 6 di NOx, la migliore prevista dagli standard europei Alta efficienza Massimo comfort e minimi consumi, in riscaldamento ed in sanitario. Stabilità dell'acqua calda sanitaria Nuovo scambiatore sanitario a piastre ottimizzato, per performance al top della categoria in termini di efficienza, stabilità della temperatura e tempi di attesa. Installazione semplice e veloce Con FAMILY l’installazione e l’accesso ai componenti sono semplificati per ridurre al minimo tempo e fatica. ACC Combustion FAMILY è caratterizzata dal sistema di controllo di combustione elettronico evoluto, che monitora costantemente la combustione per ottenere consumi ed emissioni sempre ottimizzate. Pannello di controllo con nuova funzione ibrida Con la nuova gamma FAMILY, gestire un sistema ibrido è semplice e intuitivo. Il display di FAMILY, caratterizzato da un’estetica moderna ed elegante, si arricchisce infatti della funzione di gestione di sistema multi-energia. L’intelligenza del sistema ibrido, REC 10CH, integrata nell’elettronica della nuova FAMILY, offre la possibilità di gestire le sorgenti termiche a disposizione attraverso l’interfaccia utente, senza necessità di un pannello di controllo accessorio. Garanzia prodotto :  Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less