Immergas MYTHOS HP 24 kW LPG condensing boiler complete with low NOx fume exhaust kit 3.029801 Wi-Fi Natural gas boiler code 3.029801 Energy class in heating B Sanitary energy class - Load profile A - XL Maximum nominal heat input in domestic hot water kW (kcal/h) 23.8 (20,502) Maximum nominal heat input in heating kW (kcal/h) 23.8 (20,502) Minimum nominal heat input kW (kcal/h) 9.8 (8,423) Maximum useful thermal power in domestic hot water kW (kcal/h) 22.6 (19,436) Maximum useful heat output in heating kW (kcal/h) 22.6 (19,436) Minimum useful heat output kW (kcal/h) 9.1 (7,826) Useful thermal efficiency at 100% Pn (80 / 60 °C) % 94.8 Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) % 94.7 Useful thermal efficiency at 100% Pn (40 / 30 °C) % 102.3 Useful thermal efficiency at 30% of the nominal load. (40 / 30 °C) % 100.5 Gas flow rate to the burner (methane) max/min m3 Heating expansion tank nominal capacity (total) liters 4.2 IPX 5D electrical protection degree Boiler weight full of water (empty) Kg 32.8 (30.8) Dimensions (HxWxD) mm786 x 440 x 240 Mythos HP Instant mural with heat recovery The new entry in the Immergas condensing range is specifically designed to replace traditional boilers in radiator systems, with medium-high temperatures. MYTHOS HP is designed to meet the new European Directives on the use of energy, in fact it has a traditional copper exchanger and a heat recovery unit with condensate drain siphon. It develops 24 kW of power for room heating and the instantaneous production of domestic hot water and, thanks to the reduced emissions of nitrogen oxides (NOx), it falls into class 6, the most ecological of European standards. In addition, it allows fumes to be discharged through the wall in the cases envisaged by Legislative Decree 102 of 4 July 2014. It is also the ideal boiler for replacing conventional sealed chamber and forced draft boilers connected to collective flues. MYTHOS HP is extremely compact, it finds space even in homes with limited space, it can be installed outdoors in a partially protected place or recessed in OMNI CONTAINER. The simple and essential interface consists of a central LCD display and selection buttons to adjust temperatures and operating modes. SMARTECH PLUS. CONTROL THE BOILERS REMOTELY AND SAVE The SMART hi-tech wireless chronothermostat with Bluetooth technology allows you to adjust the heating temperature even with a smartphone or tablet via a dedicated app. The switching on or off of the heating can be based, through a special function, on the geolocation of family members: the app raises the temperature when a member of the family returns home and lowers it when the last one leaves. With the app you can manage up to 18 SMART thermostats even in different homes. SMARTECH PLUS is easy to use and reads well from any angle thanks to the e-ink technology used in digital readers. It is also compatible, for some functions, with the virtual assistants Alexa and Google Home . THE ADVANTAGES OF SMARTECH PLUS Heating adjustment in time slots with the display or remotely with the dedicated app (internet connection or Wi-Fi required) Switching on and off at time slots or with the geolocation of family members on the app Control of operation, consumption, modification of parameters and display of anomalies on the website Very low consumption: it runs on batteries with an autonomy of up to more than 2 years High readability with e-ink display ê Control up to 18 SMART thermostats in different homes, via app MYTHOS HP is equipped with a copper exchanger connected to the high efficiency condensing element (heat recovery) and to a low polluting emission burner. The heat recovery unit, located downstream of the copper exchanger, is completely made of stainless steel to guarantee durability over time and maximum efficiency. It represents the condensing solution, in case of replacement of traditional generators on radiator systems that require medium-high temperatures to ensure environmental comfort. MYTHOS HP cannot be installed with direct delivery to low temperature radiant panel systems : it is necessary to provide for an external mixing to the generator. INDOOR AND OUTDOOR INSTALLATION The boiler is approved for operation outside the home as long as it is partially protected from atmospheric agents, for example by installing it under a balcony; the degree of electrical protection is IPX5D. An electric resistance kit is available to increase the antifreeze protection from -5 °C to -15 °C (code 3.031016). The upper cover kit for installation in partially protected places is optional (code 3.019090). OPTIONAL CONNECTION GROUP FOR PENDANT INSTALLATION Pendant connection group cod. 3.015229 RECESSED INSTALLATION The built-in installation allows the boiler to be positioned outside in a niche and therefore to recover living space. The OMNI CONTAINER frame cod. 3.016991 can be supplied and installed before the boiler. The front door can also be painted the same color as the house so as to fit nicely into the aesthetics of the building. OPTIONAL CONNECTION GROUP FOR BUILT-IN INSTALLATION front and rear connection group cod. 3.016445 CARV2 (MODULATING REMOTE FRIEND COMMAND) OPTIONAL It is possible to remotely control the appliance using a modulating thermostat with remote boiler controls (optional, see page 10) which allows better climatic regulation of the room temperature. In fact, it replaces the control panel of the boiler, performing all its functions. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Victrix Zeus 32 Product code : 3.028382 Energy class in heating: A Sanitary energy class: A Load prifle : XL Maximum nominal heat input in DHW: 33.1 kW Maximum nominal heat input in heating mode: 29.0 kW Minimum nominal heat input: 4.3 kW Maximum useful thermal power in DHW: 32 kW Maximum useful thermal power in heating: 28 kW Minimum useful thermal power: 4.0 kW Useful thermal efficiency at 100% Pn (80 / 60 °C): 96.6% Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) : 100.4% Minimum gas flow rate to the burner: 0.45 m 3 /h Maximum gas flow rate to the burner: 3.50 m 3 /h Weighted CO : 19 mg/kWh Weighted NO X : 38 mg/kWh Power supply: methane / LPG NO x class : 6 Minimum suction/exhaust available head: 2 Pa Maximum suction/exhaust available head: 250 Pa Nominal heating expansion vessel capacity: 10 litres Electrical protection degree : IPX5D Dimensions and weight Dimensions (HxWxD): 900x580x410 mm Empty weight: 65.5 kg Immergas Victrix Zeus Comfort and design in a small space The new VICTRIX ZEUS are condensing and total premix boilers with stainless steel boiler, compact dimensions and new design, completely renewed With 25 and 32 kW of power , they are designed for new installations, but the identical hydraulic connections compared to the previous models and the standard connection group, favor installers in replacements . In addition, the condensing module with large section stainless steel coil reduces the risk of clogging and the low-consumption circulator allows for considerable savings in electricity Thanks to the electronic card that modulates the boiler power up to 17%, high yields are obtained with a consequent reduction in gas consumption . VICTRIX ZEUS, which can also be installed outdoors in protected places such as under the balcony, can be fed with any type of fuel (methane/LPG or propane air), which is why they are supplied with a single product code In addition to allowing the fumes to be discharged from the wall in the cases envisaged by Legislative Decree 102 of 4 July 2014, the VICTRIX ZEUS are in the most ecological class of the European classification ( class 6 ) for low emissions of carbon monoxide (CO) and nitrogen oxides (NOx). For ease of use by users, the interface with LCD display and knobs, offers simple and fast adjustments and settings Formula Comfort 10 It benefits from the most comprehensive maintenance program lasting 10 years with no activation costs , with the possibility of extending it up to 15 years . In collaboration with the Immergas Authorized Service Centre, it can be activated during the initial check Smartech Plus Home temperature is now smart Evolution advances rapidly with the new Immergas SMARTECH PLUS digital chronothermostat: now the heating system communicates in the most immediate way with the home and those who live there also via smartphone and computer, comfort increases and consumption is under control SMARTECH PLUS is the intelligent chronothermostat with Bluetooth technology, which allows you to adjust the heating temperature through a dedicated app. Thanks to the geolocation system , it connects to smartphones and lets you know when no one is home or if even just one member of the family returns, in order to set the desired temperature It is compatible, for some functions, with the virtual assistants Alexa and Google Home The advantages of Smartech Plus • Remote adjustment With the display or remotely with the dedicated app (internet or Wi-Fi connection required) • Switching on and off At time slots or with the geolocation of family members on the app • Complete control of operation, consumption, modification of parameters and display of anomalies on the website • Easy to use and read Perfect visibility with e-ink technology of digital readers, consumes very little and runs on batteries that last even more than 2 years • Up to 18 thermostats With the app you can manage up to 18 smart thermostats in different homes 45 liter stainless steel boiler The stainless steel guarantees the inalterability of the boiler to the action of the water and the wide flange optimizes cleaning and maintenance operations. Inside the boiler there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange Multiple withdrawals of domestic hot water The capacity of the stainless steel boiler, combined with the excellent temperature regulation, have made it possible to obtain the marking, i.e. maximum sanitary performance, guaranteeing high comfort even with simultaneous withdrawals of domestic hot water Sanitary expansion tank as standard Approved for outdoor use Thanks to the new insulation that equips the stainless steel boiler and the standard protection down to 0 °C, the VICTRIX ZEUS boilers can be installed outdoors in a partially protected place. With an appropriate optional kit it is possible to extend it down to -15 °C (in the presence of electricity and gas). The degree of electrical insulation is IPX5D Primary exchanger in stainless steel The primary exchanger that equips the VICTRIX ZEUS is made with a single-tube exchange coil in stainless steel . The absence of collectors and circuits in parallel guarantees maximum reliability over time : there are no weldings. The single stainless steel spiral without bottlenecks allows for a perfectly balanced hydraulic circuit, considerably reducing pressure drops . The internal section, wide and constant , allows to limit deposits, reducing the risk of clogging in the case of impurities present in the water, in the case of replacing boilers on dated systems Due to this peculiarity, the VICTRIX ZEUS are ideal for replacement "Green series" plug-in flue The VICTRIX ZEUS have a dedicated series of air intake/fume exhaust kits made in such a way as to guarantee high resistance to corrosion and considerable speed and functionality during installation, thanks also to the plug-in coupling system and sealing gaskets. held in special material. VICTRIX ZEUS boilers can be installed in sealed chamber and forced draft or open chamber and forced draft configuration, ideal for outdoor installation in a partially protected place Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Sime MURELLE HT 25 Wall-mounted Condensing Boiler Class A 8115101 Methane Complete With Flue Gas Kit Included General characteristics Brand: Sime Model: MURELLE HT 25 Power supply: Methane Code: 8115101 Technical data sheet Sanitary thermal power kW: 1.75÷24.5 Heating thermal power (50-30°C) kW: 1.81÷26.4 Sanitary flow rate (EN 13203) l/min: 11.4 Heating energy efficiency class: A Heating sound power dB(A): 51 Health energy efficiency class: A Declared load health profile: XL Weight kg: 32.4 Dimensions Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from date of purchase.

Read more less

Overview JUNKERS CERAPUR BALCONY ZWB 28-1 EB CONDENSING BOILER for outdoor use COMPLETE WITH FUME KIT - NEW ErP 2016: Wall mounted condensing outdoor boiler with DHW production, combinable with solar thermal systems for DHW using Solar Kit.. Technical specifications Heating and DHW energy efficiency class (ErP): A/A For heating and domestic hot waterÿ Loaded profiles declared XL Nominal heat input (heating): 24.6 kW Nominal thermal power (sanitary): 28 kW Nominal heat input (sanitary): 28.6 kW Thermal efficiency at nominal power 40/30°C: 104.3% Efficiency thermal useful at 30% nominal load 40/30°C: 109.2% Continuous sanitary production: 13.4 l/min Sanitary temperature range that can be set: 40/60°C NOx class: 5 Absorbed electric power: 230 W Degrees of protection: IP X5D Dimensions (D x W x H):ÿ285 x 535 x 775ÿmm; 54kg Version:ÿMETHANEÿ Main features CERAPUR BALCONY Wall-mounted condensing boiler for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Small and compact,ÿCERAPURÿBALCONY has been designed to solve space problems and resist bad weather, while ensuring maximum comfort in the production of heat and domestic hot water. Advantages: Wall-mounted condensing boilers for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Certifications achieved of tipC13, C33, C63, C83, B33. Suitable for use with 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation. We will remotely control the digital room chronothermostat with the following functions: two fixed heating programs P1 and P2; a programmable P3 heating program with 22 available time slots; setting of the operating temperatures both in heating and in DHW; display of boiler operating status and any anomalies; in combination with the external probe (accessory) the functioning as a climatic control unit is activated which automatically regulates the delivery temperature according to the external temperature. Automatic antifreeze function up to an external temperature of -15°C, on both the sanitary and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW heating). Primary heat exchanger in patented high efficiency aluminosilica alloy. Domestic hot plate heat exchanger for condensing also in DHW. 6 liter heating expansion tanks. Circulator in Energy Class A. The ErP legislation and the new energy labels The future of heating systems Starting fromÿ26 September 2015ÿthe heating systems and for the production of hot water, in order to be placed on the market, will have to comply with theÿErPÿ (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiencyÿ of appliances, favoring comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding underperforming technologies from the market. The energy labelÿwill be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, allow him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements.ÿ In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, the task of whoever builds/installs the system is to provide the consumer with the correct explanatory label . The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are currently incentivized at the tax level. Junkers Boschÿ already in line with the dictates of the ErP legislation, represent a future that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Sime MURELLE HT 25 Wall-mounted Condensing Boiler Class A 8115106 LPG Complete With Flue Gas Kit Included General characteristics Brand: Sime Model: MURELLE HT 25 Power supply: LPG Code: 8115106 Technical data sheet Sanitary thermal power kW: 1.75÷24.5 Heating thermal power (50-30°C) kW: 1.81÷26.4 Sanitary flow rate (EN 13203) l/min: 11.4 Heating energy efficiency class: A Heating sound power dB(A): 51 Health energy efficiency class: A Declared load health profile: XL Weight kg: 32.4 Dimensions Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from date of purchase.

Read more less

BOX NOT INCLUDED IN THE PRICE JUNKERS BOSCH CERAPUR CONDENSING BOILER BUILT-IN CONDENSING ZWB 28-1 EI 24 kW INCLUDING SMOKE KIT - NEW ErP ErP energy class (Heating and ACS) For heating and domestic hot water production Nominal heat output in domestic hot water kW 28 Nominal heat output (heating) 40/30 °C: 25.7 kW Nominal heat output (heating) 80/60 °C: 24.0 kW Minimum heat output (domestic hot water): 7.4 kW Sanitary flow rate ΔT = 30 K: 13.4 l/min NOx class: 5 Voltage v(AC): 230 Frequency HZ: 50 Electrical power consumption: 230 W IP Protection Grade: X5D Dimensions: 243 x 533 x 775; 47 Kg As standard: Controllable from home - Manage the boiler directly from inside the home, using the TF 25 remote control , supplied as standard Junkers Bosch With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP (energy related products) Directive which specifies the minimum eco-design requirements for energy-using equipment, including energy efficiency. The heating world will also be affected by this revolutionary change. In fact, from 2015, the energy efficiency of boilers will be based on new performance indices that will take seasonal performance into account. Among the most significant changes in the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation even at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the efficiency level calculated over the course of an entire year. CerapurIncasso CERAPUR INCASSO is designed for concealed installations and encloses maximum convenience in just 250 mm of depth. Ideal for solving space problems, it does not alter the aesthetic beauty of homes. CERAPUR INCASSO in fact integrates perfectly into the facade thanks also to the possibility of painting the "shell" the same color as the wall. Boiler for concealed installations - Space saving inside the home and no aesthetic impact on the outside thanks to the installation in a niche in the wall Controllable from inside the home - Management of the boiler directly from inside the home, using the TF 25 remote control, supplied as standard Robust and reliable - Robustness and reliability of the boiler are guaranteed thanks to the construction of the primary exchanger in aluminium alloy Electrical insulation - The boiler has an electrical insulation rating of IPX5D Characteristics: Outdoor condensing wall-mounted boilers with DHW production that can be combined with solar thermal systems for DHW using Solar Kit. Certifications obtained of type C13, C33, C63, C83, B33. Suitable for use with Ø 60 mm drains. Emissions in class 5 as foreseen by the UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation indicated in a specific niche, dedicated to the built-in shell (acc. 978). Automatic antifreeze function up to an external temperature of -15 °C, both on the domestic hot water and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (sanitary and heating). Patented high efficiency aluminum-silicon alloy primary heat exchanger. Larger plate heat exchanger for domestic hot water condensation. 6 litre heating side expansion vessel. Circulator in Energy Class A. Accessories Built-in Box for Boilers: CALD_0021210 Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Sime MURELLE HT 30 Wall-mounted Condensing Boiler Class A 8115107 LPG Complete With Flue Gas Kit Included General characteristics Brand: Sime Model: MURELLE HT 30 Power supply: LPG Code: 8115107 Technical data sheet Domestic hot water thermal power kW: 2.1÷29.5 Heating thermal power (50-30°C) kW: 2.17÷31.8 Sanitary flow rate (EN 13203) l/min: 14.0 Heating energy efficiency class: A Heating sound power dB(A): 52 Health energy efficiency class: A Declared load health profile: XL Weight kg: 34.0 Dimensions Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from date of purchase.

Read more less

ATTENTION! The built-in unit is purchased separately. Technical Features Model : ecoINWALL Plus Product code : 0010017154 Energy efficiency class in heating: A Energy efficiency class in sanitary ware: A Performance Stars: ★★★★ Heating power: 5.2 kW ~ 25.1 kW Sanitary power: 5.2 kW ~ 25.6 kW Domestic hot water production (ΔT = 30K) 12.1 l/min ACS temperature regulation: 35°C ~ 60°C Hot water comfort stars: ★★★ Expansion vessel capacity: 8 litres NOx class : 5 Degree of protection: IPX5D Power supply: Methane Optional accessories Built-in box 0010030848 Installation data Flue gas connection diameter: 60/100 mm Possible diameter of exhaust gas outlets: 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic pipe diameter: 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 845x515x234 mm Empty weight: 35.5 kg Warranty extension to 7 years Vaillant ecoINWALL plus VMW built-in condensing wall-mounted boiler So discreet that it disappears into the wall ecoINWALL plus VMW is a 26 kW built-in wall-mounted boiler for domestic heating and domestic hot water production. With the combination of the convenient built-in, it allows for wall installation that disappears completely into the wall in just 25 centimetres. With this solution Vaillant responds to the needs of residential construction: limited space inside homes and aesthetic constraints that prevent the installation of exposed boilers on balconies and terraces. Since it is dedicated to the outside of the building, the boiler is equipped as standard with frost protection up to -15°C. From the display of the dedicated remote control, the user is able to carry out control, adjustment and reporting of any anomalies, remaining comfortably inside the home. Thanks to the pre-heating system and the NTC probes that monitor and prevent temperature changes, the boiler guarantees maximum comfort in domestic hot water and heating. The new modulating pump and the new stainless steel exchanger ensure great savings on electricity and gas consumption. Furthermore, combined with the multiMATIC 700 control unit, it allows you to refine the thermoregulation and further reduce management costs. ecoINWALL is not only the intelligent answer for modern installations, but a concentrate of performance, savings and technology that does not require any space inside homes. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoINWALL plus VMW The built-in solution, in the combined version Frost protection up to -15°C and IPX5D High sanitary comfort thanks to adjustable preheating Stainless steel exchanger Modulation 1:5 8 litre expansion vessel Vertical hydraulic connections Simplicity in replacing standard balcony boilers thanks to a complete range of accessories Automatic system loading function Thermoregulation with remote control as standard inside the home Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE AND CAN BE ADJUSTED TO LPG. FOR INFORMATION, CONTACT THE AUTHORIZED ASSISTANCE CENTER IN YOUR AREA IN ADVANCE Technical Features Model : ecoTEC Pro VMW 236 Methane Model with Wi-Fi: 0020256400 Energy Class in Heating: A Energy Class in Sanitary: A Heating Power: 5.2 - 23.0 kW Power in Sanitary: 5,2 - 23,0 kW Sampling rate (ΔT = 30K): 11.0 l/min DHW temperature regulation: 35° - 65° C Possible diameter of exhaust gas outlets: 60/100 mm; 80/125; 80/80; 60/60 mm Gas Pipe Diameter: 12.70 mm (1/2") Hydraulic Pipe Diameter: G3/4" Dimensions (HxWxD): 720x440x338 mm Warranty Program 7 All Vaillant condensing boilers are included in the Warranty Program 7. By purchasing a Vaillant condensing boiler you can extend the warranty from 2 to 7 years and benefit from exclusive advantages: No fixed call fee Free labor Free original spare parts EcoTEC Pro VMW Boiler All models in the ecoTEC pro VMW range have an efficiency etas = 94%. For this reason, if combined with a class VI thermoregulation (such as vSmart), they achieve a system efficiency of 98% and therefore the ErP system energy class in heating A+ . The ecoTEC pro VMW boiler (heating and DHW production) is available in the 23kW and 28 kW power ratings. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro was designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. With the new high-efficiency pump and new electronics, ecoTEC pro consumes very little electricity, guaranteeing significant savings throughout the year. Its ease of regulation makes it the ideal boiler for all users, in addition to having an extremely simple interface with clear text and a backlit display to facilitate its use. ecoTEC pro is the ideal boiler for Vaillant-on-Vaillant replacements: installation is quick and easy, as is adjusting the operating parameters. The ecoTEC pro range includes: the combined version, the smart connectivity version in combination with vSMART, a version designed for installation in multiple collective flues and two versions for installations in single collective flues. ecoTEC pro CM is also the right choice for replacing boilers in multi-family complexes or for more complicated installations. Vaillant in fact offers a range of products suitable for flue systems as well as multiple options for accessories dedicated to the boiler: a flue gas pressure switch, combined with electronics, automatically adjusts the value to be set for the length of the vertical ducting so as to correctly evacuate the exhaust fumes. The ecoTEC pro CS models are equipped with a dedicated kit, included in the supply, consisting of a non-return valve, 87° bend and 80/125mm rigid section for connection to a single collective flue Small size The small size of ecoTEC pro VMW allows it to be installed in any environment: ✔ 70cm height ✔ 44cm width ✔ 35cm depth (identical to the previous version) Available with additional approval for outdoor installations up to -5°C Control your heating with your smartphone Thanks to its free App, vSMART represents a new approach to home efficiency, transforming smartphones or tablets into remote control systems and allowing you to control and regulate ecoTEC plus at any time, from any place, quickly and intuitively. Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can transform your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, by using the Wi-Fi network you can control and regulate the comfort of your home wherever you are in a quick and extremely intuitive way vSMART is designed to ensure comfort and extreme ease of use and can be installed on the wall by connecting it to the electrical network or placed wherever you prefer using common AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design it integrates perfectly into any environment allowing you to adjust your single system and possibly the load of a boiler for domestic hot water with a simple click. The benefits of vSMART are not limited to convenience. Using this product you can drastically reduce the " start/stop " cycles of the boiler, thus allowing you to save on gas and electricity and extend the life of your appliance. Characteristics Heating and domestic hot water solution Reduced installation costs Sanitary comfort even with low flow rates High efficiency pump Intuitive display and simplified adjustments Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta EXCLUSIVE X 30 C low NOx condensing boiler complete with flue gas exhaust kit 20187795 Methane Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Declared load profile XL Characteristics of heating/DHW operation: Heating thermal capacity (max-min) kW 25 - 4.9 Nominal DHW heat input (max-min) kW 30 - 4.9 NOx class 6 IP X5D degree of protection Supply voltage V-Hz 230 - 50 Max pressure-temperature bar-°C 3 - 90 Max pressure bar 8 Boiler dimensions (HxPxL) mm 740x350x470 EXCLUSIVE X EXCLUSIVE X, with 5 models (3 of which combined and 2 'heating only'), from 25 to 35 kW of power, is able to best satisfy the multiple installation needs: from new buildings to redevelopment, from single installation to application hybrid in multi-energy system. Thanks to the ACC Combustion system, each model self-adapts to different types of gas, without the need for "dedicated" codes for methane, LPG and propane air(*), or gas conversion kits EXCLUSIVE X , TECHNOLOGY FOR A GREEN LIFESTYLE From the R&D laboratories of Beretta comes EXCLUSIVE X, the new condensing boiler that marks a further step in the evolution of the EXCLUSIVE range, whose name has always characterized the top of the brand's wall-mounted offer. Combustion and electronics, which represent the heart and brain of the boiler, have been entirely redesigned to offer an even more performing and responsive product to the European objectives of environmental sustainability. EXCLUSIVE X is the ideal choice for those who are not satisfied and are looking for green solutions. EX CLUSIVE INNOVATION The new stainless steel exchanger, the innovative electronics with hybrid function integrated in the boiler, without external remote controls, and the ability to process mixtures of natural gas and hydrogen up to 20% give EXCLUSIVE X a highly technological profile, ensuring maximum energy saving, which translates into an economic advantage for the user . EXCLUSIVE PERFORMANCE EXCLUSIVE X represents the spearhead of the Beretta offer. Thanks to the new optimized plate heat exchanger , the range achieves sanitary performance at the top of the category in terms of efficiency, temperature stability and waiting times. The refined ACC electronic combustion system, which allows the quantity of fuel delivered to be continuously modulated, offers “best-in-class” efficiency and functionality in all circumstances, reducing harmful emissions to a minimum. EXCLUSIVE BERETTA The new range represents the synthesis of Beretta's advanced research, in continuity of style with the best tradition of the brand. Continuity that manifests itself both in the aesthetics of the product, which takes up the lines of the first Beretta boiler models, reinterpreting them in a modern key, and in the simplicity of use and installation flexibility, among the distinctive features of the brand, which have always been appreciated by the market A NEW HEART OF STEEL EXCLUSIVE X is equipped with a new primary exchanger in stainless steel , with a smooth tube with a large section, to ensure the best efficiency and cleanliness over time. Stainless steel, in addition to the high resistance to the corrosive action of acid condensate, prevents the internal formation of oxides and other electrochemical phenomena typical in installation on old systems. The geometry with a single wound coil (hydraulic circuit in series) guarantees constant flow in all sections of the exchanger and intrinsically prevents phenomena of clogging. Front access facilitates periodic maintenance and cleaning of the combustion chamber. COMBUSTION WITH ELECTRONIC INJECTION The ACC system, refined by Beretta for the EXCLUSIVE X , allows in all circumstances to offer functionality, efficiency and low emissions that are “first in class”. Using a sensor for detecting the flame ionization current, which allows the electronics to continuously modulate the quantity of fuel injected, the system keeps the air/gas mixture constant at optimal values ​​over the whole modulation range of the delivered power (constant CO2 value). Thanks to the sophisticated ACC system, combustion adjusts itself, thus eliminating the need for any calibration and allowing the boiler to operate with different gas compositions. Particular attention is paid to CO emissions, through a self-diagnosis that intervenes on the burner before the emission threshold allowed by the legislation is exceeded. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

IMMERGAS VICTRIX 24 TT CONDENSING ERP COMPLETE WITH FUME EXHAUST KIT Technical features Immergas Victrix 24 TT condensing boiler Capacity: 24Kw Useful heating power kW: 20.5 DHW useful power kW: 23.6 Type: Instant Modulation range: 15 - 100% Hot water production (∆t 30 °C) l/min: 11.3 Electrical protection degree IPX: 5D Dimensions (HxWxD) mm: 748 x 440 x 280 VICTRIX TT The VICTRIX TT ErP range, intended for new installations and above all for the replacement of existing appliances, has been designed to comply with the new European Directives on the use of energy, increasingly oriented towards condensing technology to more easily reach the efficiency classes high in space heating and in the production of domestic hot water in homes. VICTRIX TT ErP, produced in the new highly automated lines of the company's historic headquarters in Brescello, incorporates the innovative condensing module which guarantees high flow rate and head on the heating circuit, low risk of clogging due to any impurities in the system and greater corrosion resistance thanks to the special alloy with which it is made. Reduced consumption thanks to the class A circulator and boiler power modulation up to 15%: ideal condition for mid-seasons or reduced loads. In addition to a very low environmental impact, the boiler features an advanced and easy-to-use user interface with adjustment knobs, selection buttons and LCD display for viewing operating temperatures, operating status and error codes. HIGH HYDRAULIC PERFORMANCE The condensing module has been designed to have large water passages which allow interesting flow rate and head performance even on old heating systems. This also means a low risk of clogging in the presence of impurities in the system water. It is made of a special Aluminium-Silicon-Magnesium alloy, a material which – together with the high thicknesses used – is particularly resistant to corrosion. The water circuit runs through the exchanger in an ascending manner, in counter-current with respect to the flame. The dense pinning allows you to increase the exchange surface ensuring excellent water yield. It is important to keep the pH of the heating system filling water between 6.5 and 8.5 with a hardness of 15°F (ref. UNI 8065 - DI 26/06/15). CLASS A CIRCULATOR The low-consumption modulating circulator guarantees considerable savings in electricity compared to a traditional circulator, it can be set in Auto or Fixed operating modes. WIDE MODULATION RANGE The electronic card reduces operating costs thanks to particularly high yields even with low energy absorption, as occurs for example in the mid-seasons. In fact, the wide range of modulation of the appliance (from 15% to 100% of the thermal power) determines high seasonal yields. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W) EVOLVED DESIGN The VICTRIX TT ErP range is designed to make the work of professionals easier. Immergas has invested significant resources in the industrialization of the parts of the appliance, making it particularly robust and has paid the utmost attention to details and finishes. VICTRIX TT ErP presents new technical features such as: • safety valve drain conveyed to the condensate drain • removable cover for direct access to the electrical connection compartment • cover casing for the water connections to better position the boiler in domestic spaces DIRECT ACCESSIBILITY TO THE ELECTRICAL CONNECTIONS COMPARTMENT In the lower part of the boiler there is a connection compartment accessible without the need to open the product but simply by removing the aesthetic cover, to house the electrical connections of the main devices that can be combined (for example CARV2, external probe, CRONO 7). ELECTRONIC AIR/GAS CONTROL The electronic gas valve allows air/gas control by means of a multifunction electrode placed inside the combustion chamber; the car electronic card adapts the combustion parameters in the event of variations in the density of the air or of the fuel. This allows VICTRIX TT ErP to be powered with any type of fuel (methane/LPG or propane air), by intervening only on the electronic board software even at a later time (for example at the first commissioning by the Authorized Assistance Centre). The boiler is therefore supplied with a single product code.

Read more less

Fondital ITACA KC 28 condensing boiler complete with flue gas exhaust kit, dirt separator and standard probe - methane Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 26.4 kW Rated heat output: 27.9 kW Efficiency at maximum power: 96.4% Efficiency at 30% load: 107.0% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 15.5 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion vessel capacity: 10 l Consumption in heating at nominal power Natural gas m3 /h 2.79 DHW consumption at nominal power Natural gas m3 /h 3.22 Total absorbed electrical power: 91 W Degree of protection of the electrical panel: IPX5D Dimensions W x H x D mm 420x750x315; 39kg Natural gas supply Warranty: 2 years ITHACA taca KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler is equipped with the "DHW comfort" function which keeps the plate exchanger warm for a faster response in the event of a request for domestic hot water. Standard magnetic dirt separator filter. Can be managed with the Spot chronothermostat. PLUS Standard room temperature probe Modulation ratio 1:9 Class 6 of NOx emissions Condensation also in DHW operation thanks to the thermally insulated 26-plate DHW exchanger Management of one heating zone with ambient temperature probe, which can be extended to two with zone kits Standard management of 2 types of solar thermal system Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling TECHNICAL FEATURES Heating water electronic flow control Heat exchanger in thermopolymers and stainless steel Total premix burner 10 liter heating expansion vessel Thermoregulation with external probe (optional) Modulating circulator with built-in deaerator DHW comfort function: ★★★ Automatic by-pass Double loading system: automatic and manual Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less