The boiler will be supplied with methane, using the appropriate kit it can be transformed for operation with LPG. Contact the local assistance center in advance. Technical features Model : atmoTEC Plus VMW 240/5-5 Product code : 0010016274 Power supply: LPG Performance Nominal thermal power in sanitary mode: 24.0 DHW nominal heat input kW 26.7 Energy efficiency class in heating: C Sanitary energy efficiency class: B Sanitary load profile : XL NOx class : 3 Performance stars : ★★ Domestic hot water production (ΔT = 30K) 11.5 l/min Domestic hot water comfort stars : ★★★ Expansion vessel capacity: 10 litres Fumes discharge temperature : 84° ~ 117°C Sound power : 49.5 dB(A) Dimensions and weight Dimensions (HxWxD): 800x338x440 mm Weight : 40.0 Kg Open flue boiler Vaillant atmoTEC Plus Standard wall mounted boiler for heating and domestic hot water Three star comfort hot water DHW pre-heating function Can be installed outdoors, protected up to -10C 10l expansion vessel High efficiency modulating pump. Energy efficiency class up to B depending on the model. For more information, see the technical data sheet The plus range was designed by Vaillant to meet all comfort needs for the production of hot water and for heating. The new atmoTEC plus series with open chamber models with natural draft features the domestic hot water pre-heating function; this function satisfies the customer's needs by reducing production times and immediately provides comfort. With a renewed design and their reduced dimensions, 80 x 44 x 34 cm, they can be placed in any room and easily housed in wall units or cover cabinets. Vaillant does not stop at the design but continues in the development and research of the best performance for the plus series obtaining exceptional results in terms of silence and ease of installation. Vaillant plus series boilers are at the top of performance in terms of efficiency, temperature constancy and low maintenance costs, thanks to the high quality of the components. A novelty in response to the ErP regulation is the introduction of a high efficiency pump (class A). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER VAILLANT AtmoTEC PRO VMW 240/5-3 METHANE OPEN CHAMBER - ErP Technical features For heating and domestic hot water production Open chamber with natural draft DHW nominal heat input kW 24 ErP energy class (heating and DHW): class C/B Performance stars (according to Dir. 92/42CEE) - *** Domestic hot water production (ΔT = 30K) 11.5 l/min Domestic hot water comfort stars (prEN 13203) - ** Expansion tank capacity: 10 l Dimensions (hxpxl) mm 800 x 338 x 440 Code: 0010016269 Version: CNG or LPG General characteristics AtmoTEC PRO Standard wall mounted boiler for heating and domestic hot water Sanitary comfort even with low flow rates Intuitive display and simplified adjustments Reduced electricity consumption Suitable for outdoor installations down to -10°C High efficiency pump. Energy efficiency class C/B The atmoTEC pro VMW (heating and DHW production) are available in powers from 24 kW. atmoTEC pro has been designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. Its simplicity of regulation makes it the ideal boiler for all users. AtmoTEC pro is equipped with an extremely simple interface with plain text and backlit display. The reduced dimensions of atmoTEC pro VMW 80cm high, 44cm wide and 35cm deep (identical to the previous version) allow installation in any environment. A new high-efficiency pump and new electronics allow atmoTEC pro to consume very little electricity, guaranteeing considerable savings throughout the year. Ecodesign Directive (ErP) 2015 How to be ready for new EU legislation What will happen from 26 September 2015? From this date it will no longer be possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high-efficiency pumps and compliant with the new ErP requirements such as emission, noise and efficiency levels. In particular, the installation of traditional open chamber boilers will only be possible to replace old boilers installed in multi-family buildings which discharge the fumes into branched collective flues (CCR). Products placed on the market before 09/26/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed.   ErP and ELD: what do they mean and how are they different?   ErP : The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive is aimed at two categories of products relevant to installers and resellers in the sector: Category 1 Includes space heating appliances: electric, gas, oil, combi boilers, heat pumps and cogenerators up to 400 kW. Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres.   ELD: in addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, it is possible to increase the energy classification of the system which will be calculated by the installer and indicated on the package label.   Let's take a look at the new labels...   When and how will the new rules apply?   On 26 September 2015 the new rules will come into effect. Until then, neither manufacturers, retailers or installers have to comply with the new Ecodesign or labeling provisions. Once the new rules come into effect, manufacturers will only be able to manufacture products that comply with the new Ecodesign requirements, and will be required to supply an energy label with the products     Why push condensing technology right away?   For the energy requalification of individual homes, the 2007 Budget Law was extended until 31 December 2015. The request for a 65% tax deduction concerns, for example, the replacement of a traditional boiler with a condensing boiler.     What will Vaillant support be?   7 year guarantee   The 7-year guarantee on new boilers is another excellent reason to offer Vaillant to your customers. In addition, know that by replacing a Vaillant boiler over 15 years old with a new generation one, the warranty extension will be provided free of charge by the Vaillant Official Technical Assistance Center against a maintenance contract. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAUNIER DUVAL MICRA 4 25 GAS AND METHANE OPEN CHAMBER BOILER Technical features Energy classification HH (92/42/EEC) with efficiency up to 89.6% (30% of Pn) Continuous domestic hot water (DHW) production up to 14l/min High efficiency and modulating circulator Heating system antifreeze function Heating efficiency class: C Sanitary efficiency class: B Sanitary load profile XL Type: Heating and domestic hot water Domestic hot water production technology: Instantaneous Nominal power PMin/Max heat. 80/60 °C (kW) Heating: 9.5 / 25 Partial load efficiency 30% 40/30 °C (%): 89.6 Min/Max Rated Power (60°C) (kW) 5/25.2 Domestic hot water temperature Min/Max (°C) 35/60 Electric power absorbed Max (W) 88 Dimensions H / W / D (mm) 740 / 410 / 313 Power supply: METHANE MICRA 4 E Instant traditional wall mounted boiler Sanitary comfort High performance Low consumption The traditional boilers of the Micra 4 E range are characterized by a simple and linear design. The range includes a 25 kW combined model. The Micra 4 E range is characterized by a harmonious design and, thanks to its latest generation electronics and high-efficiency plate exchanger, it perfectly combines reduced consumption and all-round domestic comfort. In fact, Micra 4 guarantees a high production of domestic hot water and a constant room temperature by modulating its power according to the outside temperature and the actual request from the room Characteristics Energy classification ** (92/42/EEC) with efficiency up to 89.6% (30% of Pn) The control panel on the boiler, with backlit liquid crystal display and negative contrast, makes Micra 4 E adjustment extremely easy and immediate: with a few simple gestures it is possible to adjust the heating and domestic hot water temperatures, for any need . The small size makes Micra 4 E perfect for replacement in existing systems. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BERETTA METEO 28 CAI AG METHANE BOILER - NEW ErP 2015 Cod. 20101259, OPEN ROOM WITH NATURAL DRAFT: CAI boilers specific for outdoor use, ErP version, equipped with low consumption circulator (EEI0,20). Technical specifications Product code: 20101259 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitaryware energy efficiencyprofilXL Class B Characteristics of heating/sanitary exercises: Heating/DHW nominal heat output: 28 kW Quantity of hot water with t=25øC: 16 l/min Dimensions (hxwxd) mmÿ760 x 553ÿx 240 METHANE power supply Legend:ÿ C (heating + sanitary water),ÿ A (Open Room) I (electronic ignition, controls ionization). AGÿAntifreeze fine series -15øC Features list ErP WEATHER ÿMeteoÿ is a complete range of specific boilers for outdoor use. The high technological contents enhance the specific characteristics to the maximum: dimensions, standard remote control panel, resistance to external agents, innovative performance. The quality of the materials and the innovative design of the shell add elegance to these extremely small and high performance boilers. Extremely reliable and simple to use, the boilers in the Metesonnate range are specifically designed for outdoor installations. The exclusive shell structure, the IPX4D electrical protection and the materials used for the coat provide maximum protection from external agents. The streamlined, modern aesthetic allows water to roll off. Installation is facilitated by reduced dimensions and supplied equipment. Designed for installations on balconies, Meteo, with a depth of only 24 cm, is the ideal answer to space problems; equipped as standard with fittings for connection to the system, gas taps and sanitary fixtures with positioning template. The remote control panel, supplied as standard, allows total control of the boiler from inside the home. The main functions are simple and immediate, with many other settingsÿcustomizable by the user. The remote control panel also functions as a chronothermostat weekly and prearranged for climate control via an external probe (optional). Characteristics: CAI boilers, ErP version, equipped with low consumption circulator (EEI0,20)ÿadjustable up to 7m headÿ MIX combustion (Air/Gas): constant performance (mod. CSI)ÿ Built with specific materials for outdoor useÿ Remote control panel REC 05ÿ as standard Exhaust adapter ÷ 60 with standard air intake (mod. CSI)ÿ Standard antigelfine -15øCÿ Electrical protection degrees IPX4Dÿ Arrangement for climatic thermoregulationÿ Plumbing fittings, gas taps and sanitary fittingsÿ For gas conversion, contact authorized Beretta Technical Assistance Centres Beretta or ERP. The concrete commitment to a sustainable future The acronym ÿErP, acronym of Energy related Products?ÿ (Products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015, the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective. The regulation provides that all products intended for heating and the production of domestic hot water with a lower rated thermal power equal to 70 kW can be placed on the market with an ÿenergy labelÿthat highlights theÿefficiency class*. Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility of identifying it facilitates the level of efficiency of a product by being able to carry out a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data reported for climatic bands. In addition to the product labels, the European regulation has provided for the creation of a "system label" in the case of manufacturing plants with various appliances, components and related controls. This second type of labelling, thanks to the virtuous synergy between the various elements, will make it possible to create systems capable of achieving levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to less than 400kW, will prevent inefficient products from being placed on the market. Also for DHW tanks there will be an obligation to respect minimum heat loss limits. For primary water tanks, these will be subject to compliance with an energy classification based on heat loss. For sanitary accumulations, up to 500 liters there will be the obligation of labelling, from 500 to 2000 liters they will be bound to respect the energy classification. For heat pumps for heating and for mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. In order to be placed on the market, gas-fired water heaters with solar heat pumps, in addition to energy labelling, will also have to comply with a series of requirements in terms of efficiency. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Wall mounted boiler Beretta open chamber MYNUTE 28 CAI LX METHANE code 20151436 low NOx Mynute S 28 CAI Product Typology: OPEN CHAMBER WALL BOILER Typology: Mural Use: Heating/Sanitary Boiler installation: Internal Accumulator (boiler): Instantaneous Heating nominal maximum useful power (kw): 28.80 Simple and intuitive digital display. Technical features: New boilers with low NOx emissions Low consumption circulator (EEI?0.20) as standard Specifically designed to facilitate the replacement of pre-existing wall-mounted boilers 9 liter expansion vessel Simple and intuitive digital display Predisposition for climatic thermoregulation (optional external probe)Predisposition for connection to the BeSMART Comfort control (code 20143539) IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps (optional) The ecological burner To reach high standards Mynute Low NOx is equipped with a special atmospheric burner, cooled and equipped with nozzles in number superior, which allows the specification premixing of gas and air. In this how combustion occurs a temperatures lower than usual in a traditional burner. The burner consists of a surface on the which develops the high flame few millimeters, also called "microflame". The tube that passes through the burner with the return water from the system heating promotes cooling of the burner surface. Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THIS PRODUCT IS MADE TO ORDER. WILL BE SHIPPED WITHIN 10 DAYS OF PURCHASE DATE Cadaia Beretta Open Chamber Meteo 24 cai LX Low NOx with Standard BeSmart cod. 20152461 Methane - New Heating/sanitary nominal heat input Kw 26.7 Heating/DHW nominal heat output kW 24.06 Heating reduced heat input kW 10.7 Heating reduced thermal power kW 9.33 DHW reduced heat input kW 9 DHW reduced thermal power kW 7.85 Useful efficiency Pn max - Pn min (80°-60°) % 90.1 - 87.2 Profitability 30% (50th return) % 89.5 Combustion efficiency % 91.6 Total electric power W 87 Circulator electric power (1,000 l/h) W 39 Category II2H3P Destination country IT Supply voltage V - Hz 230 - 50 IP X5D degree of protection Chimney losses with burner off - on % 0.37 - 8.40 Warm-up exercise Maximum pressure bar 3 Minimum pressure for operation 0.25 - 0.45 bar Maximum temperature 90 °C Heating water temperature selection range °C 40 - 80 Membrane expansion vessel l 8 Expansion vessel preload bar 1 Sanitary exercise Maximum pressure 6 bar Minimum pressure bar 0.15 Quantity of hot water at ?t 25° C l/min 13.8 Minimum domestic water flow rate l/min 2 Domestic hot water temperature selection range °C 37 - 60 Flow regulator l/min 10 Gas pressure Natural gas nominal pressure (G20) mbar 20 LPG (G31) liquid gas nominal pressure mbar 37 Hydraulic connections Heating inlet - outlet Ø 3/4” DHW inlet - outlet Ø 1/2” Gas inlet Ø 3/4” Boiler dimensions Height mm 760 Height with coverage 886 Width 494mm Depth 243mm Weight kg 34 LX WEATHER New boilers with Low NOx emissions Low consumption circulator (EEI≤0.20) modifiable up to 7 m head Built with specific materials for outdoor use BeSMART remote control panel as standard Standard antifreeze up to -15 °C IPX4D electrical protection degree Arrangement for climatic thermoregulation Plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available In case of unavailability, the new DIVATECH D LNC 24 model will be supplied Technical features Model : Divaproject C24 Power supply: LPG Performance Energy efficiency class in heating: C DHW energy efficiency class: A Heating nominal heat output : 7.0 ~ 23.5 kW Heat output : 8.3 ~ 25.8 kW Domestic useful thermal power: 23.5 kW Efficiency : 91 % Maximum production of domestic hot water Δt 25°C : 13.4 l/min Maximum production of domestic hot water Δt 30°C : 11.2 l/min Dimensions and weight Dimensions (HxWxD): 700x400x330 mm Empty weight: 27.0 kg Ferroli Divaproject Boiler Wall mounted boilers with instantaneous DHW production with double exchanger, open chamber, natural draft The Divaproject c24 by Ferroli is the cheapest solution for replacing open chamber boilers. Built to be installed outdoors in partially protected places and prepared for integration with a solar panel system. It has an excellent value for money and is entirely Made in Italy with a 2-year guarantee . The cheapest in its category Arrangement for solar systems Eco-comfort system for rapid domestic hot water production High efficiency low consumption circulator (class A) Ideal for residential homes up to 120 m2 2 Year Warranty Divaproject is a heat generator for heating and instant domestic hot water production. The series has been designed in each of its components to have top performance in its category while maintaining characteristics of simplicity and compactness. The control electronics allow for easy and functional combination with solar collector systems. The series includes two models: C24 and C30 The boiler is designed to operate on natural gas and LPG or even on propane air by means of a special transformation. The efficiency of Divaproject is the maximum for its category, certified at 3 stars according to the 92/42 EEC Directive for energy classification Components Expansion tank Combustion chamber Copper primary exchanger Atmospheric burner Sanitary exchanger Modulating gas valve Motorized 3-way valve Boiler control Control panel and functions Divaproject's control and management electronics allow the user to customize the operation of the appliance in order to manage environmental comfort according to one's needs. The control panel with the adjustment knobs makes the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive Remote control "ROMEO" timer Divaproject boilers can be combined with a wide range of remote timer controls which allow the appliance to be adjusted and operated remotely. The ROMEO series consists of 4 models, respectively with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With ROMEO you can: Adjust the heating and DHW temperatures Know the operating status of the boiler View the temperatures inside and outside the house Restart the boiler in case of temporary lockout Program the daily or weekly environmental comfort Activate/deactivate the heating function via the telephone The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. With solar systems Sun Easy function Divaproject boilers have been designed to be easily inserted in systems made with the most recent technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously controls the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user Comfort and Safety Functions Eco-Comfort function In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Antifreeze function Even in stand-by mode, i.e. in the absence of a heat request, if a water temperature of 5°C is detected, it activates the anti-freeze protection by igniting the burner at minimum power, in order to avoid damage due to freezing. Post-circulation device All models are equipped with this particular timed device which allows, after the burner has been switched off in heating mode, to recover all the heat accumulated due to thermal inertia from the exchanger, transferring it to the radiators and therefore to the rooms to be heated Circulation anti-blocking device After 24 hours of inactivity, the boiler circulator is automatically started for about 5 seconds to prevent it from blocking after a long period of inactivity. Strengths > Compact geometry primary heat exchanger entirely in copper > Instant production of domestic hot water with dedicated plate exchanger > Simple and complete control panel, LED user interface > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system > Combustion chamber in anti-corrosion aluminized sheet, internally insulated with ecological fiber and burner in AISI 304 stainless steel > Can be combined with the modulating remote timer control > Casing painted white by anaphoresis with epoxy powders > Compact dimensions and low weight > Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor board > Adjustable post-circulation after the heating phase > ECO/COMFORT system for rapid production of domestic hot water > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > Standard by-pass Product Warranty : The warranty on this item is 24 months from the date of purchase.

Read more less

AVAILABLE TO ORDER IMMERGAS MINI NIKE GAS BOILER 28 Kw LPG OPEN CHAMBER Technical features Energy class in heating: C; Sanitary energy class: B; Heating/DHW performance (): Max nominal heat input in heat/san. kW (kcal/h) 30.9 (26,571); Nominal heat input min. in heating/san. kW (kcal/h) 12.0 (10,356); useful heat output max. in heating/san. kW (kcal/h) 27.9 (23,994); Useful heat output min. in heating/san. kW (kcal/h) 10.5 (9,030); Specific flow rate in continuous domestic hot water service (∆t 30 °C) l/min 13.3; pressure min. DHW circuit dynamics bar 0.3; Nominal heating expansion vessel capacity (total) liters 7.5 (4.5); Electrical protection degree IP X4D; Power supply: LPG; General characteristics The NIKE MINI boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a LED for identifying operation and any malfunction. Finally, given its great reliability not only in terms of performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Designed to meet all the needs of its customers, the Immergas Nike Mini boiler respects the environment (ErP), it has been programmed to guarantee the functions that preserve the integrity of the generator over time. The use of the product is made even more versatile thanks to the possibility of combining it with numerous system and thermoregulation optionals such as CARV2, external probe, DIM range and control unit for zone systems. Ideal for replacing old boilers in the presence of flues branched collectives. Dimensions (HxWxD): 785x450x310; Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO RESIDENCE 28 KI GAS BOILER - 28 Kw LPG OPEN CHAMBER - ErP Technical features Product code: 20102218 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Domestic hot water/heating nominal heat output: 7.4÷28.7 kW Energy efficiency (92/42/EEC) ** Useful efficiency at Pn* (50°C-30°C): 90% Profit return 30% (47th return): 89.5% Open chamber, natural draft. Quantity of hot water with Δt 25°C: 16.5 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 805 x 450 x 332 ; 31 Kgs Power supply: METHANE RESIDENCE Open room Combined models Residence is the wall-mounted boiler whose main qualities are simplicity, completeness of functions and small dimensions. Modern and functional design complete with digital display and fitting cover. Residence is available in powers of 24 and 28 kW. Characteristics: CTR system for faster achievement of the desired comfort and a reduction in consumption, the formation of limescale in the boiler and temperature changes in the heating bodies Low consumption circulator (IEE≤0.20) Double exchanger: domestic hot water production with plate exchanger Antifreeze function that protects the heating and DHW circuits down to -3°C Assembly template, hydraulic fittings, power supply cable supplied. The evolution of simplicity The essential design and the elegant lower fitting cover give the product easy harmonization in any room of the house. An advanced technological heart is added to the external simplicity which, thanks to the CTR system, satisfies the comfort inside the home in a short time, allowing lower consumption, less limescale formation in the boiler and less thermal excursions in the radiators. Simplified installation and maintenance Perfect interchangeability with the Riello models installed today and a greater distance of the hydraulic connections from the wall facilitates the connection of Residences even at different center distances. Overall dimensions and weight are reduced, thus facilitating product handling and installation. The new hydraulic unit Residence is equipped with an innovative hydraulic unit in composite material. The frontal arrangement of all its components and the quick connections allow for easy maintenance. Remotely controllable Residence can be connected to a classic room chronothermostat, but for the more demanding user a remote control panel is also available as an option, which collects all the traditional settings and the weekly chronothermostat function in a simple and effective way; if connected to an external probe, it is possible to activate the climatic regulation which autonomously varies the delivery temperature according to the external temperature. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Immergas Open Chamber boiler NIKE STAR 24 G20 LPG - NEW Nominal useful power kW 23.6 Dimensions (HxWxD) mm 781 x 440 x 240 Instant type Modulation range 40 - 100% Hot water production (∆t 30°C) l/min 11.1 NIKE STAR G20 New design. User interface with buttons and display. Internal installation. IPX4D degree of protection. Optional connection group (with positions and gas/water center distances on the wall unchanged compared to previous versions). Standard lower casing (to cover the connection pipes). Modulating circulator with low electricity consumption, with settings directly on the pump (no PWM). Conventional, instantaneous wall-mounted boiler. Extremely compact, it is ideal for replacing old boilers in the presence of branched collective flues. Low consumption Quick delivery of hot water Maximum compactness: only 24 cm deep. Ideal for replacement: in the presence of existing branched collective rods. IPX4D electrical protection. Standard antifreeze down to -5 °C. Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Mini Nike 24 Product code : 3.025589 Maximum nominal heat input: 26.2 kW Minimum nominal heat input in DHW: 8.3 kW Minimum nominal heat input in heating mode: 10.9 kW Maximum useful thermal power: 23.8 kW Minimum useful thermal power in DHW: 8.1 kW Minimum useful thermal power in heating: 9.4 kW Useful thermal efficiency at 100% Pn (80/60 °C) : 91% Useful thermal efficiency at 30% of the nominal load. (80/60°C) : 88% Minimum gas flow rate to the burner: 0.88 m 3 /h Maximum gas flow rate to the burner: 2.77 m 3 /h Weighted CO : 27 mg/kWh Weighted NO X : 150 mg/kWh Specific flow rate in continuous domestic hot water service (∆t 30 °C): 11.4 l/min DHW circuit minimum dynamic pressure: 0.3 bar Nominal heating expansion vessel capacity: 6.0 litres Electrical protection degree : IPX4D Dimensions and weight Dimensions (HxWxD): 785x440x240 mm Empty weight: 26.1 kg Immergas Mini Nike Instant compact mural with natural draft Practicality and flexibility of installation A key feature of the range are the attachments which are unchanged from the previous MINI series. This peculiarity guarantees maximum ease of installation even during replacement. In addition, the compact size and low weight ensure convenience and ease of installation Solar function The boiler is designed to receive pre-heated water from a solar storage tank. By activating this function in the boiler parameters, the burner switches on only if it is necessary to integrate the heating of the water coming from the solar tank Ease of adjustment The newly designed dashboard, with backlit display, allows easy and intuitive use of the boiler. The self-diagnosis system displays the operating status of the boiler, further simplifying maintenance of the appliance by qualified technicians Ideal for connection to existing branched collective smoking pipes MINI NIKE 24 ErP complies with the thermal efficiency value (at 30% of the load) provided for by Article 4, paragraph 7 of Presidential Decree 59/09 for cases of mere replacement of the boiler, with connection to branched collective flues (ccr) Reduced electricity consumption In compliance with the new ErP directive, the boiler is equipped with a low energy consumption circulator Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO ACTA GAS BOILER AND 24 A* METHANE OPEN CHAMBER Model: ACTA 24A Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary Energy Efficiency Class B Withdrawal profile: XL Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 26.6 kW Heating/DHW maximum useful power: 24.1 kW Yield name 60°/80°C: 90.6% Yield at 30% load: 89.6% Energy efficiency stars: (dir 92/42/EEC) ** NOx class n° 3 Weighted NOx: 135 mg/kWh Minimum/maximum heating temperature: 38/85 °C Minimum/maximum heating pressure: 0.3/3.0 bar Capacity of the expansion tank (total): 8lt DHW minimum/maximum temperature: 35/60°C Maximum flow rate (ΔT=25K) / (ΔT=35K): 13.8/9.9 l/min Specific sanitary flow rate (ΔT=30 K): 11.5 l/min Voltage / Power at nominal heat input V~/ W 230~/56 Degree of protection n° IPX4D Minimum/maximum smoke temperature: 83/108°C Extremely compact dimensions hxwxd: mm 703x400x325 ; 28.7kg CNG or LPG power supply ACTA ACTA is the range of Savio boilers designed to meet modern housing needs that require reliable, compact and high performance products. The ACTA range includes open chamber boilers with powers of 24 kW and 28 kW. The ACTA series is suitable for heating and domestic hot water production. ACTA has very compact dimensions which make it easy to place in any environment. Characteristics: High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Integration with SAVIO solar systems using a solar kit Digital control panel with display. The electronic card allows you to: - Adjust the ignition pressure - Adjust the restart frequency - Manage the post-circulation of the high efficiency pump - View fault diagnostics and lockout status. Also available: - Boiler antifreeze safety - Disposal of primary circuit thermal inertia. Primary exchanger ACTA is a high efficiency boiler: the most compact exchanger, with reduced fin pitch to increase their number and ensure maximum efficiency. The large heat exchange surface is guaranteed by the helical section of the passage pipes and by the lamellar structure. The high exchange efficiency is guaranteed by the double circulation in counter flow. The exchanger is made of copper with a protective coating resistant to high temperatures. Secondary exchanger ACTA is available in a mixed version for heating and domestic hot water production: the hot water is supplied at an adjustable and constant temperature thanks to the electronic modulation of the boiler. The DHW exchanger is made of stainless steel and has a low inertia which guarantees excellent performance. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Thermo-hydrometer for reading the water pressure on the primary side. Integration with solar ACTA can be easily combined with a solar system using the Biasi solar kit. Simple and immediate to install, it does not require electrical parts and allows optimizing the integration of the solar system with the boiler which intervenes only when necessary to guarantee the required comfort temperature. Reliability and security Hydraulic groups of innovative conception: Motorized 3-way valve Integrated automatic by-pass: allows the boiler to adapt to the needs of modern heating systems Absolute heating pressure switch: guarantees protection of the boiler in the event of a lack of water or circulation Sanitary flowmeter Easily accessible filling tap Drain tap Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less