Explore our collection of Beretta products: boilers, water heaters and heating systems. Choose quality and reliability with Beretta. Achieve maximum comfort and energy efficiency with our high-end products. Find out more and find the perfect solution for your heating needs. Buy online today and trust the Beretta brand, synonymous with excellence in the sector.
Gas water heater Beretta Idrabagno LX 13 l LPG Complete with Low NOx Fume Kit - New ErP LPG code: 20143036 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: L Sanitary energy efficiency (ηwh) % 80.2 Daily gas consumption (Qfuel) kW/h 15.175 Annual gas consumption (AFC) GJ 11 Daily electricity consumption (Qelec) kWh 0.069 Annual electricity consumption (AEC) kWh 15 Sound power level indoors (LWA) dB(A) 51 Emissions of nitrogen oxides (Nox) mg/kWh 33 Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 10.7 Nominal heat input (G20-G30-G31) kW 25.00 Nominal thermal power (G20-G30-G31) kW 22.45 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar 28-30 Gas connection Ø 3/4" 3/4" 3/4” Smoke temperature (max-min) G20 / G30 / G31 °C 128-71 / 123-63 / 129-69 1 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX4D Dimensions and weight Dimensions (H×W×D) mm 642×340×237 Net weight kg 19 IDRABAGNO LX: INNOVATION IS AT HOME The new line of LOW NOx indoor water heaters From Beretta's technological research comes IDRABAGNO Lx, the new line of instantaneous water heaters with very low emissions , completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with the recent European regulations on NOx. The wide range of IDRABAGNO Lx, made up of 3 sealed chamber models of 11, 13 and 17 l, with both methane and LPG codes, thanks to the new, elegant and linear aesthetics and compact dimensions, integrates perfectly into every living environment, representing the ideal solution to meet every domestic hot water production need. Ideal for installation inside the home, the new water heaters, in the 11 and 13 L versions, can also be installed outside , in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10°C for the 11 and 13 liter models, and -7°C for the 17 liter model. The new IDRABAGNO Lx line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/ kWh. Thanks to the innovative Idrabagno Lx burner, of the hyperstoichiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. Lots of new features Simple and intuitive interface with icon language Large backlit display and 4 command keys Special functions and self-diagnostics on display Latest generation burner Water-cooled hyperstoichiometric burner Wide flame modulation High heat output, maximum sanitary comfort Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€465,00
Gas water heater Beretta Idrabagno LX 11 l LPG Complete with Low NOx Fume Kit - New ErP CNG code: 20143031 LPG code: 20143032 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: M Sanitary energy efficiency (ηwh) % 75.4 Daily gas consumption (Qfuel) kW/h 8.109 Annual gas consumption (AFC) GJ 6 Daily electricity consumption (Qelec) kWh 0.065 Annual electricity consumption (AEC) kWh 14 Sound power level indoors (LWA) dB(A) 51 Emissions of nitrogen oxides (Nox) mg/kWh 33 Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 9.5 Nominal heat input (G20-G30-G31) kW 22.20 Nominal thermal power (G20-G30-G31) kW 19.89 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar 28-30 Gas connection Ø 3/4" 3/4" 3/4” Smoke temperature (max-min) G20 / G30 / G31 °C 120-71 / 121-64 / 124-60 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX4D Dimensions and weight Dimensions (H×W×D) mm 642×340×237 Net weight kg 19 IDRABAGNO LX: INNOVATION IS AT HOME The new line of LOW NOx indoor water heaters From Beretta's technological research comes IDRABAGNO Lx, the new line of instantaneous water heaters with very low emissions , completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with the recent European regulations on NOx. The wide range of IDRABAGNO Lx, made up of 3 sealed chamber models of 11, 13 and 17 l, with both methane and LPG codes, thanks to the new, elegant and linear aesthetics and compact dimensions, integrates perfectly into every living environment, representing the ideal solution to meet every domestic hot water production need. Ideal for installation inside the home, the new water heaters, in the 11 and 13 L versions, can also be installed outside , in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10°C for the 11 and 13 liter models, and -7°C for the 17 liter model. The new IDRABAGNO Lx line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/ kWh. Thanks to the innovative Idrabagno Lx burner, of the hyperstoichiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. Lots of new features Simple and intuitive interface with icon language Large backlit display and 4 command keys Special functions and self-diagnostics on display Latest generation burner Water-cooled hyperstoichiometric burner Wide flame modulation High heat output, maximum sanitary comfort Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€408,00
Gas water heater Beretta Idrabagno LX 11 l Methane Complete with Low NOx Fume Kit - New ErP CNG code: 20143031 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: M Sanitary energy efficiency (ηwh) % 75.4 Daily gas consumption (Qfuel) kW/h 8.109 Annual gas consumption (AFC) GJ 6 Daily electricity consumption (Qelec) kWh 0.065 Annual electricity consumption (AEC) kWh 14 Sound power level indoors (LWA) dB(A) 51 Emissions of nitrogen oxides (Nox) mg/kWh 33 Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 9.5 Nominal heat input (G20-G30-G31) kW 22.20 Nominal thermal power (G20-G30-G31) kW 19.89 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar 28-30 Gas connection Ø 3/4" 3/4" 3/4” Smoke temperature (max-min) G20 / G30 / G31 °C 120-71 / 121-64 / 124-60 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX4D Dimensions and weight Dimensions (H×W×D) mm 642×340×237 Net weight kg 19 Gas versions available - Methane IDRABAGNO LX: INNOVATION IS AT HOME The new line of LOW NOx indoor water heaters From Beretta's technological research comes IDRABAGNO Lx, the new line of instantaneous water heaters with very low emissions , completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with the recent European regulations on NOx. The wide range of IDRABAGNO Lx, made up of 3 sealed chamber models of 11, 13 and 17 l, with both methane and LPG codes, thanks to the new, elegant and linear aesthetics and compact dimensions, integrates perfectly into every living environment, representing the ideal solution to meet every domestic hot water production need. Ideal for installation inside the home, the new water heaters, in the 11 and 13 liter versions , can also be installed outside , in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10°C for the 11 and 13 liter models, and -7°C for the 17 liter model. The new IDRABAGNO Lx line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/ kWh. Thanks to the innovative Idrabagno Lx burner , of the hyperstochiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit , results in a significant lowering of the polluting values of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. Lots of new features Simple and intuitive interface with icon language Large backlit display and 4 command keys Special functions and self-diagnostics on display Latest generation burner Water-cooled hyperstoichiometric burner Wide flame modulation High heat output, maximum sanitary comfort Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€408,00
Gas water heater Beretta Idrabagno LX 17 l LPG Complete with Low NOx Fume Kit - New ErP LPG code: 20143038 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: XL Sanitary energy efficiency (ηwh) % 82 Daily gas consumption (Qfuel) kW/h 24,225 Annual gas consumption (AFC) GJ 18 Daily electricity consumption (Qelec) kWh 0.082 Annual electricity consumption (AEC) kWh 18 Sound power level indoors (LWA) dB(A) 51 Emissions of nitrogen oxides (Nox) mg/kWh 40 Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 13.2 Nominal heat input (G20-G30-G31) kW 30.00 Nominal thermal power (G20-G30-G31) kW 27.60 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar - / 37 Gas connection Ø 3/4" 3/4" 3/4” Smoke temperature (max-min) G20 / G30 / G31 °C 135-72 / - / 137-71 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX4D Dimensions and weight Dimensions (H×W×D) mm 640×400×246 Net weight kg 21 IDRABAGNO LX: INNOVATION IS AT HOME The new line of LOW NOx indoor water heaters From Beretta's technological research comes IDRABAGNO Lx, the new line of instantaneous water heaters with very low emissions , completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with the recent European regulations on NOx. The wide range of IDRABAGNO Lx, made up of 3 sealed chamber models of 11, 13 and 17 l, with both methane and LPG codes, thanks to the new, elegant and linear aesthetics and compact dimensions, integrates perfectly into every living environment, representing the ideal solution to meet every domestic hot water production need. Ideal for installation inside the home, the new water heaters, in the 11 and 13 L versions, can also be installed outside , in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10°C for the 11 and 13 liter models, and -7°C for the 17 liter model. The new IDRABAGNO Lx line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/ kWh. Thanks to the innovative Idrabagno Lx burner, of the hyperstoichiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. Lots of new features Simple and intuitive interface with icon language Large backlit display and 4 command keys Special functions and self-diagnostics on display Latest generation burner Water-cooled hyperstoichiometric burner Wide flame modulation High heat output, maximum sanitary comfort Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€612,00
ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Beretta MYNUTE X 25 C Low NOx condensing boiler complete with flue gas kit 20163564 LPG - NEW Boiler code 20163564 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Declared load profile XL NOx emission class 6 HEATING EXERCISE Heating thermal capacity (max-min) kW 20.00-3.60 Maximum pressure-temperature bar-°C 3 - 90 Expansion tank capacity l 9 HEALTHCARE EXERCISE Nominal DHW heat input (max-min) kW 25.00-3.60 DHW energy efficiency ηwh % 83 DHW production at ∆T= 25°C / 30°C / 35°C l/min 14.3/11.9/10.2 CONNECTIONS Heating inlet - outlet Ø 3/4” DHW inlet - outlet Ø 1/2” Gas inlet Ø 3/4” DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 35 kgs MYNUTE X BERETTA PRESENTS MYNUTE X, THE NEW RANGE OF CONDENSING BOILERS, WITH MANY INNOVATIVE AND ADVANTAGEOUS FEATURES From the primary exchanger in stainless steel to the modern electronic interface, there are numerous new elements that distinguish MYNUTE X in the Beretta offer. The new condensing range, with its 5 models from 20 to 35 kW, with "combined" and "heating only" versions, meets every need for residential comfort. High efficiency, low consumption and ease of installation make MYNUTE X the winning choice, both for new homes and for the replacement market. With MYNUTE X, the novelty of the project merges with Beretta's tradition of excellence, matured in almost half a century of experience in the home comfort sector. Its aesthetics, in line with the Beretta style of the latest generation products, easily integrates into any living context, thanks also to its compactness and installation flexibility. NEW DIGITAL INTERFACE MYNUTE X is equipped with a modern and user-friendly control panel, elegantly covered by a door that lets you glimpse the light of its "green gem", the LED light bar that signals its current operating status. Through a modern backlit LCD display, which communicates with the user through icons and scrolling texts (multilingual), it is possible to access the functions of MYNUTE X. Through 7 silk-screened operating keys, it is possible to navigate the panel in a simple and intuitive way, accessing to the settings and parameterizations of the boiler and the system. MYNUTE X FEATURES MANAGEMENT OF UP TO 2 HYDRAULIC CIRCUITS, HIGH AND/OR LOW TEMPERATURE, THROUGH SPECIFIC PREHEATING ACCESSORIES PREHEATING ACTIVATION TO REDUCE DOMESTIC HOT WATER WAITING TIMES CLOCK FUNCTION WEEKLY PROGRAMMING INTEGRATED IN THE DISPLAY POSSIBILITY OF CONNECTION WITH DOMESTIC HOT WATER TANK (R MODELS) Technology and benefits NEW PRIMARY EXCHANGER IN STAINLESS STEEL THE NEW MYNUTE X EXCHANGER IS MADE OF STAINLESS STEEL, WITH A HIGH SECTION SMOOTH PIPE TO OFFER THE BEST EFFICIENCY AND CLEANLINESS OVER TIME. In addition to the high resistance to the corrosive action of acid condensate, AISI 304 L stainless steel reduces the internal formation of oxides and other electrochemical phenomena typical of installation on old systems. The single wound coil geometry (hydraulic circuit in series) offers a constant flow rate in all sections of the exchanger and intrinsically limits clogging phenomena. Front access facilitates periodic maintenance and cleaning of the combustion chamber. INTEGRATED CLAP MYNUTE X is C10 * approved (formerly 3CEp approved), integrating the non-return valve (clapet) as standard on all models, which makes it "ready to install" in case of installations in pressurized collective flues, for which the non-return valve is a mandatory device. The non-return valve is a specific device which allows the combustion fumes to flow through the ducts in only one direction, i.e. from the burner to the flue gas outlet. Its function is therefore to prevent the fumes from returning to the combustion chamber, compromising the correct functioning of the boiler. This could happen for various reasons, for example in the event of overpressure in the duct of a collective flue system. The non-return valve is generally supplied as a specific optional kit, to be installed at the flue outlet of a boiler in the case of C10 type collective exhausts. In MYNUTE X the non-return valve is positioned inside the boiler (see detail), which translates into quick installation and cost reduction. HYBRID READY MYNUTE X is a HYBRID READY solution. The boiler was born within the offer of HYBRID READY products, which make up the new hybrid technology system conceived and developed in the Beretta Research Laboratories. This system, created to meet the current and future integration and management needs of the various energy sources (Gas/Electricity/Renewables), also includes the most innovative methods of energy accumulation and distribution. Characteristics INNOVATIVE STAINLESS STEEL CONDENSING HEAT EXCHANGER WITH FRONT ACCESS WIDE MODULATION RANGE (UP TO 1:8) LOW CONSUMPTION MODULATING CIRCULATOR (EEI ≤ 0.20), 6 m EQUIPPED WITH STANDARD FUME CLAP (CHECK VALVE) AND C(10) APPROVED.* LOW POLLUTANT EMISSIONS: CLASS 6 (UNI EN 15502) MYNUTE X IS HYBRID READY: IT WAS BORN TO BE INTEGRATED INTO BERETTA MULTI-ENERGY SYSTEMS THROUGH THE HYBRID REC 10H AND THE HYBRID CONNECTS, AVAILABLE AS ACCESSORIES INSTALLATION FLEXIBILITY: INDOOR, OUTDOOR** AND RECESSED*** INSTALLATION (IN A PARTIALLY PROTECTED PLACE) CLICK-FIT FLUE CONNECTION: FAST AND SAFE, WITHOUT THE NEED OF AN EXTERNAL COLLAR ANTIFREEZE RESISTANCE KIT, HYDRAULIC CONNECTIONS AND EXTERNAL PROBE AVAILABLE AS ACCESSORIES ELECTRICAL PROTECTION DEGREE IPX5D SUPPLIED "DOUBLE T" TEMPLATE COMPATIBLE WITH HYBRID CONNECTORS FOR THE MANAGEMENT OF UP TO TWO SYSTEM ZONES FOR GAS CONVERTING, PLEASE CONTACT AUTHORIZED BERETTA TECHNICAL ASSISTANCE CENTERS COMPATIBLE WITH BeSMART WIFI COMFORT CONTROL AS THERMOSTAT (OTBUS COMMUNICATION), ALLOWING THE MOST ADVANCED FUNCTIONS POSSIBILITY OF INTUBATING FLUES WITH THE SPECIFIC FLUE IN PP Ø60 AND Ø50 Product Warranty The warranty on this item is 24 months from the date of purchase.
€1.104,00
Gas water heater Beretta Idrabagno LX 17 l Methane Complete with Low NOx Fume Kit - New ErP CNG code: 20143037 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: XL Sanitary energy efficiency (ηwh) % 82 Daily gas consumption (Qfuel) kW/h 24,225 Annual gas consumption (AFC) GJ 18 Daily electricity consumption (Qelec) kWh 0.082 Annual electricity consumption (AEC) kWh 18 Sound power level indoors (LWA) dB(A) 51 Emissions of nitrogen oxides (Nox) mg/kWh 40 Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 13.2 Nominal heat input (G20-G30-G31) kW 30.00 Nominal thermal power (G20-G30-G31) kW 27.60 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar - / 37 Gas connection Ø 3/4" 3/4" 3/4” Smoke temperature (max-min) G20 / G30 / G31 °C 135-72 / - / 137-71 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX4D Dimensions and weight Dimensions (H×W×D) mm 640×400×246 Net weight kg 21 IDRABAGNO LX: INNOVATION IS AT HOME The new line of LOW NOx indoor water heaters From Beretta's technological research comes IDRABAGNO Lx, the new line of instantaneous water heaters with very low emissions , completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with the recent European regulations on NOx. The wide range of IDRABAGNO Lx, made up of 3 sealed chamber models of 11, 13 and 17 l, with both methane and LPG codes, thanks to the new, elegant and linear aesthetics and compact dimensions, integrates perfectly into every living environment, representing the ideal solution to meet every domestic hot water production need. Ideal for installation inside the home, the new water heaters, in the 11 and 13 L versions, can also be installed outside , in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10°C for the 11 and 13 liter models, and -7°C for the 17 liter model. The new IDRABAGNO Lx line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/ kWh. Thanks to the innovative Idrabagno Lx burner, of the hyperstoichiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. Lots of new features Simple and intuitive interface with icon language Large backlit display and 4 command keys Special functions and self-diagnostics on display Latest generation burner Water-cooled hyperstoichiometric burner Wide flame modulation High heat output, maximum sanitary comfort Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€612,00
Technical features Model Series : SHORT Power : 12000 Btu SET code (indoor + outdoor) 20160476 Wi-Fi Optional COOLING PERFORMANCE Capacity at nominal air flow kW 3.60 Absorbed power at nominal air flow kW 1.11 SEER kW/kW 6.80 Energy class A++ Annual energy consumption kWh/a 186 PERFORMANCE IN HEATING Capacity at nominal air flow kW 4.20 Absorbed power at nominal air flow kW 1.13 SCOP kW/kW 4.00 Energy class A+ Annual energy consumption kWh/a 1123 OUTDOOR UNIT SOUND LEVELS Sound power dB(A) 61 Sound pressure dB(A) 46 SOUND LEVELS INDOOR UNIT IN COOLING Sound power dB(A) 55 Super minimum/maximum sound pressure dB(A) 21/36 CONNECTIONS Connections for liquid/gas pipes 6.35/9.52 mm Maximum length 15m DIMENSIONS Indoor unit HxWxD mm 280/820/195 Outdoor unit HxWxD mm 540/780/245 SHORT BERETTA PRESENTS BREVA, THE NEW WALL-MOUNTED MONOSPLIT INVERTER AIR CONDITIONER, WITH R32 HEAT PUMP, WITH LOW ENVIRONMENTAL IMPACT. The new BREVA air conditioner, for summer and winter air conditioning in residential environments, is able to offer you the best comfort and maximum efficiency. The range is divided into 3 models equipped with Inverter technology, capable of responding to all needs. The Inverter technology allows the power absorbed by the air conditioner to be adapted continuously, reducing or increasing it according to the needs of the environment, guaranteeing a and the reduction of electricity consumption. Efficiency and elegance Beretta, which has always been a leader in research into the efficiency of its products, ensures that BREVA air conditioners have been designed to offer this feature both in summer cooling and in winter heating. Efficiency is synonymous with a reduction in electricity consumption and in the BREVA offer, the Class A++ models are equivalent to low running costs. Design The BREVA indoor unit stands out for the refined aesthetic finish and the quality of the materials with which it was made, as well as for the technical solutions for the operating information that complete it. These features allow easy insertion inside homes. Even the construction details of the outdoor units have been particularly taken care of in order to avoid their deterioration, even after many years of exposure to atmospheric agents. Comfort There are many factors that create environmental comfort and BREVA air conditioners are able to control them all. In addition to the perfect stability of the room temperature, the continuous air cleaning action is added, carried out through the antibacterial and photocatalytic filters, to offer a healthier environment. Thanks to the DRY dehumidification function, optimal humidity values are always guaranteed. The internal units of the BREVA series are also distinguished by the breadth of the air flow range they are able to handle. R32 refrigerant gas Beretta BREVA air conditioners use R32 refrigerant gas, with low environmental impact. The new gas has numerous performance advantages, allowing the units to reach up to efficiency class A++, as well as complying with the new European Regulation for the reduction of the environmental impact of fluorinated gases in the atmosphere. Air filtration Thanks to the combined action of the supplied filters (antibacterial and photocatalytic), BREVA guarantees an optimal level of air quality. LED display Indoor unit equipped with LED DISPLAY to display the temperature, compressor operation and any error messages. The display can be disabled, using the "light" button on the remote control, to ensure maximum comfort during the night. Super silent Environmental comfort is also linked to the sound level and is especially important in bedrooms or studios. The BREVA series allows you to guarantee the ideal climate all year round with a sound level that is virtually imperceptible to the human ear (20 dB(A)). This function can be activated both in heating and cooling mode. Night function Selecting the "SLEEP" button on the remote control sets the night function which regulates the operation of the air conditioner to ensure maximum comfort. In cooling, it increases the temperature set by the user by 1 °C, with hourly intervals, for the first 2 hours, and maintains the temperature reached for 6 hours before going off. In heating, the set temperature decreases by 2 °C, with hourly intervals, for the first 2 hours; after 3 hours it increases the temperature by 2 °C, for a duration of 3 hours, before going off. Always connected With the Wi-Fi kit available as an accessory, the comfort of your home can be managed comfortably even away from home. Through the dedicated Beretta App, which can be downloaded free of charge for iOS and Android systems, it is possible to set the operating mode, the time programming and check the operating status from Smartphones and tablets. Product Guarantee: All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.
€360,00
Air Conditioner Beretta Dual Split Inverter BREVA series 9000+12000 btu R-32 with UE 18000-2 Wi-Fi Optional Class A++ 1) Model Series:1x BREVA Power 9000 btu Wi-Fi optional Dimensions HxWxD 280/820/195 mm 2) Model Series:1x BREVA Power 12000 btu Wi-Fi optional Dimensions HxWxD 280/820/195 mm OUTDOOR UNIT Power 18000 btu Cooling energy class A++ SEER 6.5 SCOP (medium) 4.0 Energy class Risc (average climate) A+ OPERATING LIMITS IN COOLING -15/43 OPERATING LIMITS IN HEATING -25/24 Sound power 62dB Sound pressure 55dB Liquid connection 2x6.35 Gas connection 2x9.52 Maximum length 30m Dimensions HxWxD 553/800/275 mm SHORT BREVA, THE RANGE OF INVERTER WALL-MOUNTED AIR CONDITIONERS , WITH R32 HEAT PUMP, HAS BEEN ENRICHED WITH THE MULTI SPLIT VERSION, OFFERING THE POSSIBILITY OF SERVING TWO ROOMS AT THE SAME TIME WITH A SINGLE OUTDOOR UNIT. ALSO THE MONOSPLIT VERSION INCREASES ITS RANGE WITH A NEW MODEL. The BREVA air conditioner, for summer and winter air conditioning of residential environments, expands its proposal with the addition of the multi-split version and a new model in the mono-split version . The new range, which is now divided into 5 models (4 in the monosplit version and 1 in the dual version) , as well as offering greater installation flexibility, also renews the outdoor unit, for better comfort and maximum efficiency. Inverter technology allows the power absorbed by the air conditioner to be adapted continuously, reducing or increasing it according to the needs of the environment, guaranteeing a constant temperature and the reduction of electricity consumption. Efficiency and elegance Beretta, which has always been a leader in research into the efficiency of its products, ensures that BREVA air conditioners have been designed to offer this feature both in summer cooling and in winter heating. Efficiency is synonymous with a reduction in electricity consumption and in the BREVA offer, the Class A++ models are equivalent to low running costs. Design The BREVA indoor unit stands out for the refined aesthetic finish and the quality of the materials with which it was made, as well as for the technical solutions for the operating information that complete it. These features allow easy insertion inside homes. Even the construction details of the outdoor units have been particularly taken care of in order to avoid their deterioration, even after many years of exposure to atmospheric agents. Comfort There are many factors that create environmental comfort and BREVA air conditioners are able to control them all. In addition to the perfect stability of the room temperature, the continuous air cleaning action is added, carried out through the antibacterial and photocatalytic filters, to offer a healthier environment. Thanks to the DRY dehumidification function, optimal humidity values are always guaranteed. The internal units of the BREVA series are also distinguished by the breadth of the air flow range they are able to handle. R32 refrigerant gas Beretta BREVA air conditioners use R32 refrigerant gas, with low environmental impact. The new gas has numerous performance advantages, allowing the units to reach up to efficiency class A++, as well as complying with the new European Regulation for the reduction of the environmental impact of fluorinated gases in the atmosphere. Air filtration Thanks to the combined action of the supplied filters (antibacterial and photocatalytic), BREVA guarantees an optimal level of air quality. LED display Indoor unit equipped with LED DISPLAY to display the temperature, compressor operation and any error messages. The display can be disabled, using the "light" button on the remote control, to ensure maximum comfort during the night. Super silent Environmental comfort is also linked to the sound level and is especially important in bedrooms or studios. The BREVA series allows you to guarantee the ideal climate all year round with a sound level that is virtually imperceptible to the human ear (20 dB(A)). This function can be activated both in heating and cooling mode. Night function Selecting the "SLEEP" button on the remote control sets the night function which regulates the operation of the air conditioner to ensure maximum comfort. In cooling, it increases the temperature set by the user by 1 °C, with hourly intervals, for the first 2 hours, and maintains the temperature reached for 6 hours before going off. In heating, the set temperature decreases by 2 °C, with hourly intervals, for the first 2 hours; after 3 hours it increases the temperature by 2 °C, for a duration of 3 hours, before going off. Always connected With the Wi-Fi kit available as an accessory, the comfort of your home can be managed comfortably even away from home. Through the dedicated Beretta App, which can be downloaded free of charge for iOS and Android systems, it is possible to set the operating mode, the time programming and check the operating status from Smartphones and tablets. Product Guarantee: All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.
€903,00
Air Conditioner Beretta Dual Split Inverter BREVA series 12000+12000 btu R-32 with UE 18000-2 Wi-Fi Optional Class A++ 1) Model Series:2x BREVA Power 12000 btu Wi-Fi optional Dimensions HxWxD 280/820/195 mm OUTDOOR UNIT Power 18000 btu Cooling energy class A++ SEER 6.5 SCOP (medium) 4.0 Energy class Risc (average climate) A+ OPERATING LIMITS IN COOLING -15/43 OPERATING LIMITS IN HEATING -25/24 Sound power 62dB Sound pressure 55dB Liquid connection 2x6.35 Gas connection 2x9.52 Maximum length 30m Dimensions HxWxD 553/800/275 mm SHORT BREVA, THE RANGE OF INVERTER WALL-MOUNTED AIR CONDITIONERS , WITH R32 HEAT PUMP, HAS BEEN ENRICHED WITH THE MULTI SPLIT VERSION, OFFERING THE POSSIBILITY OF SERVING TWO ROOMS AT THE SAME TIME WITH A SINGLE OUTDOOR UNIT. ALSO THE MONOSPLIT VERSION INCREASES ITS RANGE WITH A NEW MODEL. The BREVA air conditioner, for summer and winter air conditioning of residential environments, expands its proposal with the addition of the multi-split version and a new model in the mono-split version . The new range, which is now divided into 5 models (4 in the monosplit version and 1 in the dual version) , as well as offering greater installation flexibility, also renews the outdoor unit, for better comfort and maximum efficiency. Inverter technology allows the power absorbed by the air conditioner to be adapted continuously, reducing or increasing it according to the needs of the environment, guaranteeing a constant temperature and the reduction of electricity consumption. Efficiency and elegance Beretta, which has always been a leader in research into the efficiency of its products, ensures that BREVA air conditioners have been designed to offer this feature both in summer cooling and in winter heating. Efficiency is synonymous with a reduction in electricity consumption and in the BREVA offer, the Class A++ models are equivalent to low running costs. Design The BREVA indoor unit stands out for the refined aesthetic finish and the quality of the materials with which it was made, as well as for the technical solutions for the operating information that complete it. These features allow easy insertion inside homes. Even the construction details of the outdoor units have been particularly taken care of in order to avoid their deterioration, even after many years of exposure to atmospheric agents. Comfort There are many factors that create environmental comfort and BREVA air conditioners are able to control them all. In addition to the perfect stability of the room temperature, the continuous air cleaning action is added, carried out through the antibacterial and photocatalytic filters, to offer a healthier environment. Thanks to the DRY dehumidification function, optimal humidity values are always guaranteed. The internal units of the BREVA series are also distinguished by the breadth of the air flow range they are able to handle. R32 refrigerant gas Beretta BREVA air conditioners use R32 refrigerant gas, with low environmental impact. The new gas has numerous performance advantages, allowing the units to reach up to efficiency class A++, as well as complying with the new European Regulation for the reduction of the environmental impact of fluorinated gases in the atmosphere. Air filtration Thanks to the combined action of the supplied filters (antibacterial and photocatalytic), BREVA guarantees an optimal level of air quality. LED display Indoor unit equipped with LED DISPLAY to display the temperature, compressor operation and any error messages. The display can be disabled, using the "light" button on the remote control, to ensure maximum comfort during the night. Super silent Environmental comfort is also linked to the sound level and is especially important in bedrooms or studios. The BREVA series allows you to guarantee the ideal climate all year round with a sound level that is virtually imperceptible to the human ear (20 dB(A)). This function can be activated both in heating and cooling mode. Night function Selecting the "SLEEP" button on the remote control sets the night function which regulates the operation of the air conditioner to ensure maximum comfort. In cooling, it increases the temperature set by the user by 1 °C, with hourly intervals, for the first 2 hours, and maintains the temperature reached for 6 hours before going off. In heating, the set temperature decreases by 2 °C, with hourly intervals, for the first 2 hours; after 3 hours it increases the temperature by 2 °C, for a duration of 3 hours, before going off. Always connected With the Wi-Fi kit available as an accessory, the comfort of your home can be managed comfortably even away from home. Through the dedicated Beretta App, which can be downloaded free of charge for iOS and Android systems, it is possible to set the operating mode, the time programming and check the operating status from Smartphones and tablets. Product Guarantee: All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.
€928,00
Technical features Series : Short Power 24000 Btu Wi-Fi Optional COOLING PERFORMANCE Capacity at nominal air flow kW 7.00 Absorbed power at nominal air flow kW 2.16 SEER kW/kW 7.10 Energy class A++ Annual energy consumption kWh/a 350 PERFORMANCE IN HEATING Capacity at nominal air flow kW 8.10 Absorbed power at nominal air flow kW 2.18 SCOP kW/kW 4.00 Energy class A+ Annual energy consumption kWh/a 1963 OUTDOOR UNIT SOUND LEVELS Sound power dB(A) 65 Sound pressure dB(A) 52 SOUND LEVELS INDOOR UNIT IN COOLING Sound power dB(A) 60 Super minimum/maximum sound pressure dB(A) 30/47 CONNECTIONS Connections for liquid/gas pipes 6.35/12.7 mm Maximum length 25m DIMENSIONS Indoor unit HxWxD mm 335/1125/240 Outdoor unit HxWxD mm 697/890/353 SHORT BERETTA PRESENTS BREVA, THE NEW WALL-MOUNTED MONOSPLIT INVERTER AIR CONDITIONER, WITH R32 HEAT PUMP, WITH LOW ENVIRONMENTAL IMPACT. The new BREVA air conditioner, for summer and winter air conditioning in residential environments, is able to offer you the best comfort and maximum efficiency. The range is divided into 3 models equipped with Inverter technology, capable of responding to all needs. The Inverter technology allows the power absorbed by the air conditioner to be adapted continuously, reducing or increasing it according to the needs of the environment, guaranteeing a and the reduction of electricity consumption. Efficiency and elegance Beretta, which has always been a leader in research into the efficiency of its products, ensures that BREVA air conditioners have been designed to offer this feature both in summer cooling and in winter heating. Efficiency is synonymous with a reduction in electricity consumption and in the BREVA offer, the Class A++ models are equivalent to low running costs. Design The BREVA indoor unit stands out for the refined aesthetic finish and the quality of the materials with which it was made, as well as for the technical solutions for the operating information that complete it. These features allow easy insertion inside homes. Even the construction details of the outdoor units have been particularly taken care of in order to avoid their deterioration, even after many years of exposure to atmospheric agents. Comfort There are many factors that create environmental comfort and BREVA air conditioners are able to control them all. In addition to the perfect stability of the room temperature, the continuous air cleaning action is added, carried out through the antibacterial and photocatalytic filters, to offer a healthier environment. Thanks to the DRY dehumidification function, optimal humidity values are always guaranteed. The internal units of the BREVA series are also distinguished by the breadth of the air flow range they are able to handle. R32 refrigerant gas Beretta BREVA air conditioners use R32 refrigerant gas, with low environmental impact. The new gas has numerous performance advantages, allowing the units to reach up to efficiency class A++, as well as complying with the new European Regulation for the reduction of the environmental impact of fluorinated gases in the atmosphere. Air filtration Thanks to the combined action of the supplied filters (antibacterial and photocatalytic), BREVA guarantees an optimal level of air quality. LED display Indoor unit equipped with LED DISPLAY to display the temperature, compressor operation and any error messages. The display can be disabled, using the "light" button on the remote control, to ensure maximum comfort during the night. Super silent Environmental comfort is also linked to the sound level and is especially important in bedrooms or studios. The BREVA series allows you to guarantee the ideal climate all year round with a sound level that is virtually imperceptible to the human ear (20 dB(A)). This function can be activated both in heating and cooling mode. Night function Selecting the "SLEEP" button on the remote control sets the night function which regulates the operation of the air conditioner to ensure maximum comfort. In cooling, it increases the temperature set by the user by 1 °C, with hourly intervals, for the first 2 hours, and maintains the temperature reached for 6 hours before going off. In heating, the set temperature decreases by 2 °C, with hourly intervals, for the first 2 hours; after 3 hours it increases the temperature by 2 °C, for a duration of 3 hours, before going off. Always connected With the Wi-Fi kit available as an accessory, the comfort of your home can be managed comfortably even away from home. Through the dedicated Beretta App, which can be downloaded free of charge for iOS and Android systems, it is possible to set the operating mode, the time programming and check the operating status from Smartphones and tablets. Product Guarantee: All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.
€800,00
Technical features Model Series : SHORT Power : 12000 Btu Wi-Fi Optional SET code (indoor + outdoor) 20160473 COOLING PERFORMANCE Capacity at nominal air flow kW 2.60 Absorbed power at nominal air flow kW 0.80 SEER kW/kW 6.20 Energy class A++ Annual energy consumption kWh/a 147 PERFORMANCE IN HEATING Capacity at nominal air flow kW 3.40 Absorbed power at nominal air flow kW 0.91 SCOP kW/kW 4.00 Energy class A+ Annual energy consumption kWh/a 839 OUTDOOR UNIT SOUND LEVELS Sound power dB(A) 60 Sound pressure dB(A) 46 SOUND LEVELS INDOOR UNIT IN COOLING Sound power dB(A) 21/52 Super minimum/maximum sound pressure dB(A) 21/35 CONNECTIONS Connections for liquid/gas pipes 6.35/9.52 mm Maximum length 15m DIMENSIONS Indoor unit HxWxD mm 280/820/195 Outdoor unit HxWxD mm 540/780/245 SHORT BERETTA PRESENTS BREVA, THE NEW WALL-MOUNTED MONOSPLIT INVERTER AIR CONDITIONER, WITH R32 HEAT PUMP, WITH LOW ENVIRONMENTAL IMPACT. The new BREVA air conditioner, for summer and winter air conditioning in residential environments, is able to offer you the best comfort and maximum efficiency. The range is divided into 3 models equipped with Inverter technology, capable of responding to all needs. The Inverter technology allows the power absorbed by the air conditioner to be adapted continuously, reducing or increasing it according to the needs of the environment, guaranteeing a and the reduction of electricity consumption. Efficiency and elegance Beretta, which has always been a leader in research into the efficiency of its products, ensures that BREVA air conditioners have been designed to offer this feature both in summer cooling and in winter heating. Efficiency is synonymous with a reduction in electricity consumption and in the BREVA offer, the Class A++ models are equivalent to low running costs. Design The BREVA indoor unit stands out for the refined aesthetic finish and the quality of the materials with which it was made, as well as for the technical solutions for the operating information that complete it. These features allow easy insertion inside homes. Even the construction details of the outdoor units have been particularly taken care of in order to avoid their deterioration, even after many years of exposure to atmospheric agents. Comfort There are many factors that create environmental comfort and BREVA air conditioners are able to control them all. In addition to the perfect stability of the room temperature, the continuous air cleaning action is added, carried out through the antibacterial and photocatalytic filters, to offer a healthier environment. Thanks to the DRY dehumidification function, optimal humidity values are always guaranteed. The internal units of the BREVA series are also distinguished by the breadth of the air flow range they are able to handle. R32 refrigerant gas Beretta BREVA air conditioners use R32 refrigerant gas, with low environmental impact. The new gas has numerous performance advantages, allowing the units to reach up to efficiency class A++, as well as complying with the new European Regulation for the reduction of the environmental impact of fluorinated gases in the atmosphere. Air filtration Thanks to the combined action of the supplied filters (antibacterial and photocatalytic), BREVA guarantees an optimal level of air quality. LED display Indoor unit equipped with LED DISPLAY to display the temperature, compressor operation and any error messages. The display can be disabled, using the "light" button on the remote control, to ensure maximum comfort during the night. Super silent Environmental comfort is also linked to the sound level and is especially important in bedrooms or studios. The BREVA series allows you to guarantee the ideal climate all year round with a sound level that is virtually imperceptible to the human ear (20 dB(A)). This function can be activated both in heating and cooling mode. Night function Selecting the "SLEEP" button on the remote control sets the night function which regulates the operation of the air conditioner to ensure maximum comfort. In cooling, it increases the temperature set by the user by 1 °C, with hourly intervals, for the first 2 hours, and maintains the temperature reached for 6 hours before going off. In heating, the set temperature decreases by 2 °C, with hourly intervals, for the first 2 hours; after 3 hours it increases the temperature by 2 °C, for a duration of 3 hours, before going off. Always connected With the Wi-Fi kit available as an accessory, the comfort of your home can be managed comfortably even away from home. Through the dedicated Beretta App, which can be downloaded free of charge for iOS and Android systems, it is possible to set the operating mode, the time programming and check the operating status from Smartphones and tablets. Product Guarantee: All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.
€305,00
Technical features Series : Short Power 18000 Btu Wi-Fi Optional SET code (indoor + outdoor) 20160477 COOLING PERFORMANCE Capacity at nominal air flow kW 5.20 Absorbed power at nominal air flow kW 1.61 SEER kW/kW 6.80 Energy class A++ Annual energy consumption kWh/a 268 PERFORMANCE IN HEATING Capacity at nominal air flow kW 6.00 Absorbed power at nominal air flow kW 1.61 SCOP kW/kW 4.00 Energy class A+ Annual energy consumption kWh/a 1819 OUTDOOR UNIT SOUND LEVELS Sound power dB(A) 63 Sound pressure dB(A) 51 SOUND LEVELS INDOOR UNIT IN COOLING Sound power dB(A) 58 Super minimum/maximum sound pressure dB(A) 21/44 CONNECTIONS Connections for liquid/gas pipes 6.35/12.7 mm Maximum length 25m DIMENSIONS Indoor unit HxWxD mm 318/1008/225 Outdoor unit HxWxD mm 614/820/338 SHORT BERETTA PRESENTS BREVA, THE NEW WALL-MOUNTED MONOSPLIT INVERTER AIR CONDITIONER, WITH R32 HEAT PUMP, WITH LOW ENVIRONMENTAL IMPACT. The new BREVA air conditioner, for summer and winter air conditioning in residential environments, is able to offer you the best comfort and maximum efficiency. The range is divided into 3 models equipped with Inverter technology, capable of responding to all needs. The Inverter technology allows the power absorbed by the air conditioner to be adapted continuously, reducing or increasing it according to the needs of the environment, guaranteeing a and the reduction of electricity consumption. Efficiency and elegance Beretta, which has always been a leader in research into the efficiency of its products, ensures that BREVA air conditioners have been designed to offer this feature both in summer cooling and in winter heating. Efficiency is synonymous with a reduction in electricity consumption and in the BREVA offer, the Class A++ models are equivalent to low running costs. Design The BREVA indoor unit stands out for the refined aesthetic finish and the quality of the materials with which it was made, as well as for the technical solutions for the operating information that complete it. These features allow easy insertion inside homes. Even the construction details of the outdoor units have been particularly taken care of in order to avoid their deterioration, even after many years of exposure to atmospheric agents. Comfort There are many factors that create environmental comfort and BREVA air conditioners are able to control them all. In addition to the perfect stability of the room temperature, the continuous air cleaning action is added, carried out through the antibacterial and photocatalytic filters, to offer a healthier environment. Thanks to the DRY dehumidification function, optimal humidity values are always guaranteed. The internal units of the BREVA series are also distinguished by the breadth of the air flow range they are able to handle. R32 refrigerant gas Beretta BREVA air conditioners use R32 refrigerant gas, with low environmental impact. The new gas has numerous performance advantages, allowing the units to reach up to efficiency class A++, as well as complying with the new European Regulation for the reduction of the environmental impact of fluorinated gases in the atmosphere. Air filtration Thanks to the combined action of the supplied filters (antibacterial and photocatalytic), BREVA guarantees an optimal level of air quality. LED display Indoor unit equipped with LED DISPLAY to display the temperature, compressor operation and any error messages. The display can be disabled, using the "light" button on the remote control, to ensure maximum comfort during the night. Super silent Environmental comfort is also linked to the sound level and is especially important in bedrooms or studios. The BREVA series allows you to guarantee the ideal climate all year round with a sound level that is virtually imperceptible to the human ear (20 dB(A)). This function can be activated both in heating and cooling mode. Night function Selecting the "SLEEP" button on the remote control sets the night function which regulates the operation of the air conditioner to ensure maximum comfort. In cooling, it increases the temperature set by the user by 1 °C, with hourly intervals, for the first 2 hours, and maintains the temperature reached for 6 hours before going off. In heating, the set temperature decreases by 2 °C, with hourly intervals, for the first 2 hours; after 3 hours it increases the temperature by 2 °C, for a duration of 3 hours, before going off. Always connected With the Wi-Fi kit available as an accessory, the comfort of your home can be managed comfortably even away from home. Through the dedicated Beretta App, which can be downloaded free of charge for iOS and Android systems, it is possible to set the operating mode, the time programming and check the operating status from Smartphones and tablets. Product Guarantee: All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.
€595,00
You have seen 48 out of 139 products
