GAS BOILER BERETTA MYNUTE S 28 CAI LPG OPEN CHAMBER - NEW ErP Technical features Product code: 20102088 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Heating/DHW nominal heat output: 28 kW Quantity of hot water with Δt=25°C: 16 l/min Dimensions (hxwxd) mm 740 x 452 x 336 METHANE power supply Legend: C (heating + sanitary water), A (Open Room) I (electronic ignition, ionization control). MYNUTE S - ErP The benchmark for standard wall mounted boilers. The innovation: Designed to facilitate replacement The new Mynute S, a point of reference in the range of Beretta Clima standard wall-mounted boilers, is specifically designed to make installation particularly easy, especially when replacing with other products. The models in the Mynute S range comply with Legislative Decree 311/06. The reliable: Technology at the service of quality The new Mynute S offers highly reliable combustion and electronics and boasts the high degree of electrical protection IPX5D. The range is therefore characterized by safety and solidity thanks to the components with which it is made which belong to a high quality standard. The boiler features the most innovative safety devices: control systems that monitor the presence of the flame, on the correct evacuation of fumes, on temperatures and pressures. The anti-blocking cycles of the circulator and the board anti-freeze system allow the appliance to last longer over time. The new Mynute S also boasts the Survivor Function which allows it to continue to function in the event of failure of the sanitary NTC probe. The elegant: A modern style that integrates with any environment The new Mynute S is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to perform all the functions necessary for using the boiler. Characteristics: CAI boilers, ErP version, equipped with low consumption circulator (EEI20) Specifically designed to facilitate the replacement of pre-existing wall-mounted boilers 9 liter expansion vessel Simple and intuitive digital display Arrangement for climatic thermoregulation (optional external probe) Can be interfaced with the REC 08 Remote Control Panel (optional) IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps (optional) For gas conversion, contact authorized Beretta Technical Assistance Centres Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER BERETTA MYNUTE S 28 CAI LPG OPEN CHAMBER - NEW ErP Technical features Product code: 20102088 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Heating/DHW nominal heat output: 28 kW Quantity of hot water with Δt=25°C: 16 l/min Dimensions (hxwxd) mm 740 x 452 x 336 METHANE power supply Legend: C (heating + sanitary water), A (Open Room) I (electronic ignition, ionization control). MYNUTE S - ErP The benchmark for standard wall mounted boilers. The innovation: Designed to facilitate replacement The new Mynute S, a point of reference in the range of Beretta Clima standard wall-mounted boilers, is specifically designed to make installation particularly easy, especially when replacing with other products. The models in the Mynute S range comply with Legislative Decree 311/06. The reliable: Technology at the service of quality The new Mynute S offers highly reliable combustion and electronics and boasts the high degree of electrical protection IPX5D. The range is therefore characterized by safety and solidity thanks to the components with which it is made which belong to a high quality standard. The boiler features the most innovative safety devices: control systems that monitor the presence of the flame, on the correct evacuation of fumes, on temperatures and pressures. The anti-blocking cycles of the circulator and the board anti-freeze system allow the appliance to last longer over time. The new Mynute S also boasts the Survivor Function which allows it to continue to function in the event of a failure of the sanitary NTC probe. The elegant: A modern style that integrates with any environment The new Mynute S is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to perform all the functions necessary for using the boiler. Characteristics: CAI boilers, ErP version, equipped with low consumption circulator (EEI20) Specifically designed to facilitate the replacement of pre-existing wall-mounted boilers 9 liter expansion vessel Simple and intuitive digital display Arrangement for climatic thermoregulation (optional external probe) Can be interfaced with the REC 08 Remote Control Panel (optional) IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps (optional) For gas conversion, contact authorized Beretta Technical Assistance Centres Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER BERETTA MYNUTE S 24 CAI METHANE OPEN CHAMBER - NEW ErP Product name BERETTA MYNUTE S 24 CAI CNG BOILER Technical features Product code: 20095667 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Heating/DHW nominal heat output: 24 kW Quantity of hot water with Δt=25°C: 14 l/min Dimensions (hxwxd) mm 740 x 400 x 336 METHANE power supply Legend: C (heating + sanitary water), A (Open Room) I (electronic ignition, ionization control). MYNUTE S - ErP The benchmark for standard wall mounted boilers. The innovation: Designed to facilitate replacement The new Mynute S, a point of reference in the range of Beretta Clima standard wall-mounted boilers, is specifically designed to make installation particularly easy, especially when replacing with other products. The models in the Mynute S range comply with Legislative Decree 311/06. The reliable: Technology at the service of quality The new Mynute S offers highly reliable combustion and electronics and boasts the high degree of electrical protection IPX5D. The range is therefore characterized by safety and solidity thanks to the components with which it is made which belong to a high quality standard. The boiler features the most innovative safety devices: control systems that monitor the presence of the flame, on the correct evacuation of fumes, on temperatures and pressures. The anti-blocking cycles of the circulator and the board anti-freeze system allow the appliance to last longer over time. The new Mynute S also boasts the Survivor Function which allows it to continue to function in the event of a failure of the sanitary NTC probe. The elegant: A modern style that integrates with any environment The new Mynute S is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to perform all the functions necessary for using the boiler. Characteristics: CAI boilers, ErP version, equipped with low consumption circulator (EEI20) Specifically designed to facilitate the replacement of pre-existing wall-mounted boilers 9 liter expansion vessel Simple and intuitive digital display Arrangement for climatic thermoregulation (optional external probe) Can be interfaced with the REC 08 Remote Control Panel (optional) IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps (optional) For gas conversion, contact authorized Beretta Technical Assistance Centres Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input: 25 kW Classification European Directive EEC 92/42: **** Quantity of hot water with Δt=25°C: 14 l/min Dimensions (hxlxp) mm 780 x 400 x 336 METHANE power supply Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control) Exclusive services: Mynute Sinthesi - ErP Mynute Sinthesi by Beretta is a wall-mounted condensing boiler for high temperature single-family systems. Continuous electronic modulation of the gas antifreeze device as standard (up to 0°C). Environmental Self-Regulation System (SARA). Mynute Sinthesi keeps all the peculiarities of the Mynute range unchanged but evolves towards new needs. The boiler is equipped with a heat recovery unit on the fumes and combustion in a sealed chamber; this makes it possible to obtain very high performance in terms of efficiency and therefore significant energy savings. Mynute Sinthesi therefore represents the ideal solution both in the first installation and in the replacement. Characteristics: ErP boilers with 6 m low consumption circulator (EEI≤0.20) Specific for high temperature systems Condensing post exchanger in aluminum alloy IPX5D electrical protection degree Environmental Self-Regulation System (SARA) Hydraulic connections cover (optional) Template, plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres Beretta is “ERP”. The concrete commitment towards an eco-sustainable future The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive   Sanitary Energy Efficiency : Class A Load profile: M Exercise features: Open chamber with natural draft Ignition - 1.5 battery Flame control - by ionization Rated thermal power: 19kW Hot water production Δ T=25°C: 11 l/min Min/max pressure bar 0.3/10 Ø water and gas connections - 1/2” Dimensions (HxLxP): mm 580 x 310 x 215; 9.5 kgs The guarantee is the Official Beretta Italia one, and has a duration of 24 months Power supply: LPG General characteristics SOURCE 2 DGT Fonte 2 DGT, hot water in compact dimensions From Beretta's experience and technological research comes the new line of Fonte 2 DGT water heaters, designed to offer maximum sanitary comfort, maximum energy savings and greater ease of use. Thanks to its extremely compact dimensions, Fonte 2 DGT can also be placed in limited spaces and therefore represents the ideal solution to meet the installation needs of modern living contexts. The range, open ionization chamber with battery ignition, two water filters as standard and with codes for both methane and LPG, is made up of the Fonte 2 DGT versions with 11 and 14 litres/min models and Fonte 2 DGT FLEX with a from 11 litres/min. The FLEX versions also include the hoses and the sanitary tap. Source 2 DGT: high energy class and low consumption The Fonte 2 DGT line of water heaters is equipped with the special device known as the Economiser, specifically designed to combine maximum user comfort with significant energy and cost savings. The activation of the Economiser in fact allows to reduce the gas consumption up to over 50%, limiting the maximum thermal power supplied, when the usage requirements are contained (low temperature difference or reduced sampling flow rates, such as for example during summertime). Furthermore, on all Fonte 2 DGT models, the Economizer can be adjusted progressively by the user, according to needs, achieving maximum savings in the low flame position. Finally, the appliances in the Fonte 2 DGT range are equipped with flame modulation which, by adapting gas consumption to individual withdrawal requests, allows the temperature of the water supplied to be kept almost constant, compatibly with the settings made and the power of the water heater. The Beretta Fonte 2 DGT water heater guarantees always very low gas consumption and respect for the environment. Beretta Fonte 2 DGT complies with the current ERP regulation placing itself in CLASS A for energy consumption. Functionality and ease of use The Fonte 2 DGT water heaters, with a linear and essential design, have an ergonomic dashboard which houses two knobs which allow you to manage all the functions of the appliance in a simple and intuitive way and a display which shows the temperature of the domestic hot water produced. The left knob, in addition to the on/off functions, activates the "Gas economiser" device, adjustable between the small flame and the large flame, allowing the user to make an interesting gas saving. The right knob allows you to set the temperature of the water supplied, by regulating the quantity of water at the outlet Characteristics: Instantaneous open chamber water heater with Natural Gas and LPG versions Abundant production of domestic hot water: 11 or 14 litres/min Digital display with indication of domestic hot water temperature Battery ignition and ionisation flame presence control Gas economizer with 8 regulation steps Modulating flame regulation system Simple and intuitive control panel Compact size and simple installation without removing the shell Assembly template supplied (gasket and hose holder for LPG versions) New easy access water connections on the same horizontal axis New latest generation water/gas group with integrated gas pressure regulator Double inlet water filter Safety microswitch to protect the batteries (2 x 1.5 Volt type D) in the OFF position Temperature selector FLEX versions with flexible fittings and standard tap Beretta is “ERP”. The concrete commitment towards an eco-sustainable future The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta EXCLUSIVE GREEN E 25 CSI condensing boiler complete with flue kit cod. 20104060 Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 20 kW Heating nominal heat output: 21.44 kW Classification European Directive EEC 92/42: ★ ★ ★ ★ Sanitary comfort ★ ★ ★ (EN 13203) NOx emission class: 5 (UNI EN 677) Efficiency at rated power: 98.7% Efficiency at reduced load (30%): 109.6% Total electric power: 93W Electrical protection degree: iP X5D Expansion tank capacity: 9 lt Quantity of hot water with Δt=25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min Sanitary water temperature selection range: 35 - 60°C Dimensions (hxlxp) mm 845x453x358 ; 44kg METHANE power supply Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionization control). EXCLUSIVE GREEN E HI-EFFICIENCY ECOLOGICAL CONDENSING WALL-MOUNTS The new Exclusive Green E condensing boilers , equipped with the innovative Beretta front exchanger, in addition to implementing the requests of the ErP standards, improve all the peculiarities confirming themselves as top of the range. Seasonal efficiency up to 94%, very wide modulation range (up to 1:10), low consumption modulating circulator with the possibility of increasing the head up to 7m and reduced consumption are some of the main features. The new Exclusive Green E boilers also offer excellent reliability and technology and, thanks to their high performance, are an excellent solution in hybrid systems with solar thermal and heat pumps. The external probe that allows you to activate the climatic thermoregulation is standard as standard. Furthermore, by adding the optional BeSMART WiFi Comfort Control kit and the LINK MODE interface board kit, Exclusive Green E constitutes a class A+ system and home comfort can be governed by remotely via APP for smartphones and tablets. The boilers are equipped with a special high-head fan designed to be able to pipe flues with Ø 60 mm or Ø 50 mm flues. Front access condensing heat exchanger ( New ! ) The Exclusive Green E boiler is equipped with the new Beretta condensing exchanger with front access . An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. Modulation 1:10 The range offers a wide range of modulation to respond to real energy needs, while simultaneously offering a high reduction in consumption. Beretta realizes this system through a totally pneumatic and therefore safe and reliable model. The electronics in fact act only on the number of fan revolutions (inlet air flow rate) without intervening on the injection of the gas quantity which is automatically sucked in. Beretta therefore introduces a new double distribution mixer: a mechanical damper with a calibrated weight which opens or closes a part of the section of the venturi so as to divide the modulation range into two stages (smaller section with low air flow rates or larger section with high air flow rates). Beretta has also developed a specific silencer in the air intake to reduce any resonances generated by the new mixer. Up to 19 m of ducting with Exclusive Green E 25 With Exclusive Green E it is possible to duct even the most "difficult" flues with ease thanks to the approval for Ø 50mm flues which is added to the traditional Ø 80 mm and Ø 60 mm ducting flues. The main 50mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power. Flex modulating circulator, optimized performance, low consumption ( New ! ) Exclusive Green E uses a low energy consumption synchronous modulating circulator with an Energy Efficiency Index of less than 0.20, which means significantly reduced electricity consumption. The new circulator is set as standard to modulate proportionally to the power supplied by the boiler, thus contributing to a further reduction in electricity consumption. Alternatively, it can modulate with a constant ΔT logic in order to maximize the phenomenon of condensation in the exchanger. If necessary on the heating system, it is also possible to modify the maximum head which is normally set on the 6 m curve, opting for the 4 m, 5 m or 6 m curve without having to replace the circulator, from this characteristic comes the name "Flex". Smart management The control panel is the boiler management device. Simple and intuitive, it allows you to adjust the parameters and activate the numerous functions. A large liquid crystal display shows all important information. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The simple pressure of a key allows you to choose the season and, when the boiler asks for it, the Easy Filling function is activated by pressing a key. The panel integrates the Clima Facile function: thermoregulation and external probe as standard. Compatible with BE Smart ( New ! ) The BeSMART WiFi Comfort Control Panel, optional compatible with Exclusive Green E, is the remote boiler management device with modulating chronothermostat functions. With the WiFi Box accessory, included in the BeSMART WiFi Comfort Control, it is also possible to manage comfort remotely using Smartphones and Tablets. The BeSMART WiFi control is very simple to install and intuitive to use and allows you to adjust the parameters and activate the many functions on the boiler. A large liquid crystal display shows all important information. Using the buttons on the control, the temperature of the heating water and domestic hot water is set easily and intuitively and the heating time programming is carried out. Exclusive Green E and the optional BeSMART WiFi Comfort Control Kits and LINK MODE interface card form a class A+ system. Characteristics: Exclusive Green E* with the BeSMART WiFi Comfort Control (optional) or with the REC 07 Remote Control (optional) forms a class A+ system Compatible with the BeSMART WiFi Comfort Control for remote control via iOS or Android APP from Smartphone or Tablet Very high modulation (up to 1:10) New high-flow aluminum condensing exchanger with front access Low polluting emissions: class 5 (UNI EN 483) Low consumption modulating circulator (EEI≤0.20) 6 m head adjustable up to 7 m Thermoregulation with standard external probe Standard hydraulic fitting cover Possibility of intubating flues with the special flue in PP ø 60 (up to 23m) and ø 50 (up to 19m)** Template, plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres *except model 35E **model 25E Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Technical features Heating nominal heat input: 30 kW Heating nominal heat output: 29.13 kW Classification European Directive EEC 92/42: ★ ★ ★ ★ Sanitary comfort ★ ★ ★ Expansion vessel capacity: 10 l Quantity of hot water with Δt=25°C: 17.2 l/min Minimum domestic water flow rate: 2 l/min Sanitary water temperature selection range: 35 - 60°C Total electric power: 125W Electrical protection degree: IP X5D NOx emission class: 5 Power supply: methane Characteristics Modulation 1:10 Low consumption modulating circulator (Class A) Patented condensing exchanger (Patent Pending) in aluminum with high flow rate Thermoregulation with standard external probe Standard hydraulic fitting cover For gas conversion, contact authorized Beretta Technical Assistance Centres Dimensions Dimensions (HxWxD): 845x453x358 mm Weight: 42Kg

Read more less

Technical features Energy label specifications according to the European ErP directive   Sanitary Energy Efficiency : Class A Load profile: L Exercise features: Open chamber with natural draft Ignition - 1.5 battery Flame control - by ionization Nominal heat output: 24 kW Hot water production Δ T=25°C: 14 l/min Min/max pressure bar 0.3/10 Ø water and gas connections - 1/2” Dimensions (HxLxP): mm 620x380x224; 11.5 kgs The guarantee is the Official Beretta Italia one, and has a duration of 24 months Power supply: LPG General characteristics SOURCE 2 DGT Fonte 2 DGT, hot water in compact dimensions From Beretta's experience and technological research comes the new line of Fonte 2 DGT water heaters, designed to offer maximum sanitary comfort, maximum energy savings and greater simplicity of use. Thanks to its extremely compact dimensions, Fonte 2 DGT can also be placed in limited spaces and therefore represents the ideal solution to meet the installation needs of modern living contexts. The range, open ionization chamber with battery ignition, two water filters as standard and with codes for both methane and LPG, is made up of the Fonte 2 DGT versions with 11 and 14 litres/min models and Fonte 2 DGT FLEX with a from 11 litres/min. The FLEX versions also include the hoses and the sanitary tap. Source 2 DGT: high energy class and low consumption The Fonte 2 DGT line of water heaters is equipped with the special device known as the Economiser, specifically designed to combine maximum user comfort with significant energy and cost savings. The activation of the Economizer in fact allows to reduce gas consumption up to over 50%, limiting the maximum thermal power supplied, when the usage requirements are contained (low temperature difference or reduced sampling flow rates, such as for example during summertime). Furthermore, on all Fonte 2 DGT models, the Economizer can be adjusted progressively by the user, according to needs, achieving maximum savings in the low flame position. Finally, the appliances in the Fonte 2 DGT range are equipped with flame modulation which, by adapting gas consumption to individual withdrawal requests, allows the temperature of the water supplied to be kept almost constant, compatibly with the settings made and the power of the water heater. The Beretta Fonte 2 DGT water heater guarantees always very low gas consumption and respect for the environment. Beretta Fonte 2 DGT complies with the current ERP regulation placing itself in CLASS A for energy consumption. Functionality and ease of use The Fonte 2 DGT water heaters, with a linear and essential design, have an ergonomic dashboard which houses two knobs which allow you to manage all the functions of the appliance in a simple and intuitive way and a display which shows the temperature of the domestic hot water produced. The left knob, in addition to the on/off functions, activates the "Gas economiser" device, adjustable between the small flame and the large flame, allowing the user to make an interesting gas saving. The right knob allows you to set the temperature of the water supplied, by regulating the quantity of water at the outlet Characteristics: Instantaneous open chamber water heater with Natural Gas and LPG versions Abundant production of domestic hot water: 11 or 14 litres/min Digital display with indication of domestic hot water temperature Battery ignition and ionisation flame presence control Gas economizer with 8 regulation steps Modulating flame regulation system Simple and intuitive control panel Compact size and simple installation without removing the shell Assembly template supplied (gasket and hose holder for LPG versions) New easy access water connections on the same horizontal axis New latest generation water/gas group with integrated gas pressure regulator Double inlet water filter Safety microswitch to protect the batteries (2 x 1.5 Volt type D) in the OFF position Temperature selector FLEX versions with flexible fittings and standard tap Beretta is “ERP”. The concrete commitment towards an eco-sustainable future The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: in the absence of this product, the new model CIAO S 24 CAI LX LOW NOX will be shipped GAS BOILER BERETTA CIAO S 24 CAI LPG OPEN CHAMBER - NEW ErP Technical features Model: HELLO S 24 CAI Code: 20096549 Heating/DHW nominal heat output: 24 kW Efficiency at nominal power: 92% Efficiency at reduced load (30%): 90.6% Quantity of hot water with Δt=25°C: 14 l/min Dimensions (hxwxd) mm 740 x 400 x 340; 30kg Heating and DHW energy efficiency class (ErP): C - B LPG power supply Legend: C (heating + sanitary water), A (Open Room) I (electronic ignition, ionisation control). HELLO S, the reliable one Innovation at the service of quality The new Ciao S, available in both the open chamber and sealed chamber versions with a thermal power of 24kW, is designed with components that belong to a high quality standard: a boiler which is therefore characterized by reliability and sturdiness. The models in the Ciao S range are compliant with Legislative Decree 311/06 HELLO S, the universal A sealed boiler for all environments The sealed chamber models are designed to be installed outdoors in partially protected places or recessed thanks to the dedicated accessories and board anti-freeze protection down to -3°C. In colder temperature conditions it is possible to extend the protection down to -10°C using the antifreeze heater kit (optional) together with the lower cover (optional). The upper cover is also available for greater protection of the appliance. The new Ciao S range also benefits from the high degree of electrical protection IPX5D. HELLO S, the elegant A modern style The new Ciao S is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to perform all the functions necessary for using the boiler. Characteristics: CAI boilers, ErP version, equipped with 6 m low consumption circulator (EEI0.20) Can also be installed externally and recessed (model CSI only) Double exchanger: primary and sanitary Double air intake (mod. CSI) Can be installed flush-mounted using special optional accessories (mod. CSI) 8 liter expansion vessel Three-speed circulator with 5 m (non ErP versions) Simple and intuitive digital display Arrangement for climatic thermoregulation (optional external probe) Can be interfaced with the REC 08 Remote Control Panel (optional) IPX5D electrical protection degree Available lower cover for mod. CIS (optional) Optional plumbing fittings, gas and sanitary taps Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less