Gas water heater Beretta Idrabalcony LX 11 l Methane Low Nox 20144193 CNG code: 20144193 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: M Sanitary energy efficiency (ηwh) % 75.4 Daily gas consumption (Qfuel) kW/h 8.109 Annual gas consumption (AFC) GJ 6 Daily electricity consumption (Qelec) kWh 0.065 Annual electricity consumption (AEC) kWh 14 Sound power level indoors (LWA) dB(*) Emissions of nitrogen oxides (Nox) mg/kWh 33 Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 9.4 Nominal heat input (G20-G30-G31) kW 22.20 Nominal thermal power (G20-G30-G31) kW 19.71 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar 28-30/37 Gas connection Ø 3/4 Smoke temperature (max-min) G20 / G30 / G31 °C 140-80/ 121-64 / 124-60 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX5D Dimensions and weight Dimensions (H×W×D) mm 699×408×260 Net weight kg 21 Gas versions available - Methane/LPG Idrabalcony Lx Beretta presents IDRABALCONY Lx , the new line of instantaneous water heaters specific for outdoor use, with very low emissions and direct smoke outlet. As underlined by the name, Idrabalcony is the ideal line for installation on balconies and in general exposed from the outside, as it does not require flues or smoke channels, a very appreciable feature both for the reduced aesthetic impact and for the ease of use. installation. Idrabalconu Lx, in line with the recent European NOx regulations, further reduces the environmental impact by lowering the limit of harmful emissions from combustion. The range is divided into 3 models of 11, 13 and 17 litres , available with both methane and LPG codes, to satisfy all domestic hot water production needs. The high temperature stability of the hot water supplied, even in the case of minimal withdrawals, completes the profile of this new water heater, placing it among the best products in the reference segment. Wide range of 11, 13 and 17 lt sealed chamber water heaters for outdoor use, also with LPG. CLASS A sanitary energy efficiency Very low NOx emissions (nitrogen oxides), to protect the environment, according to Regulation (EU) 814/2013 Modern and compact design, which can be easily integrated into any context. Innovative user interface with backlit display, icon language and 4 command keys. Temperature stability of the hot water supplied, even in the case of small withdrawals. Anti-scald function, which can be set from the display, to set the maximum water dispensing temperature. Arrangement for integration with solar thermal, with function that can be activated from the display. THE IDRABALCONY* LX MODEL, SPECIFIC FOR OUTDOORS, DOES NOT NEED CHIMNEY OR SMOKE CHANNELS (A2 TYPE APPLIANCE), FACILITATE INSTALLATION AND REDUCE THE AESTHETIC IMPACT Burner features: Water-cooled hyperstoichiometric burner Wide flame modulation High heat output, maximum sanitary comfort The new IDRABALCONY Lx line is able to satisfy the most demanding requirements in terms of low emissions, in force since September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/kWh . Thanks to the innovative Idrabalcony Lx burner, of the hyperstoichiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The new IDRABALCONY Lx are characterized by the new electronics which, combined with the modern and linear design, result in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40 x 60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Guarantee All products on our site are brand new and boxed. The warranty is 24 months from the date of purchase.

Read more less

NEW EXCLUSIVE EXCLUSIVE, A NEW STORY BEGINS. Through the innovative ACC electronic injection combustion, HYBRID READY integration and the new project design, EXCLUSIVE offers exclusive advantages in every installation variation. From the new EXCLUSIVE, A NEW STORY BEGINS. construction, redevelopment; from hybrid application in a multi-energy system to simple single installation, EXCLUSIVE represents the current and winning choice for those who are not satisfied and want to look beyond. Characteristics: Electronic injection combustion via ACC system EXCLUSIVE plus only the BeSMART Wi-Fi Comfort Control (optional) forms a class A+ system 94% (ETAs) of energy efficiency in heating Universal installation : Indoor, outdoor and recessed installation. IPX5D electrical protection degree Tempozero installation: Removing the casing NO longer necessary for electrical connections and calibration Low consumption modulating circulator (EEI≤ 0.20) 6 m head, electronically modifiable up to 7 m Hydraulic connections and external probe available as options Frost protection down to -5 °C as standard HYBRID READY boiler , Can be integrated via BUS in a multi-energy system to make boiler operation more effective in relation to other energy sources (can be combined with a Beretta hybrid system using the REC 10H interface available as an accessory) Talking display: User interface for direct communication using TEXT and ICONS Self-adapting: The boiler automatically adapts to different types of gas and installation - ZERO calibrations CO alarm Boiler CO level constantly monitored and calibrated for maximum safety Small size: Thanks to its compactness, EXCLUSIVE can also be easily installed in a wall unit LPG version selectable from parameter Gas transformation kit not necessary Europe strategy With the opening towards the management of multi-energy plants, the reduction of emissions and the optimization of consumption, Beretta signs with EXCLUSIVE the highest contribution in terms of respect for the environment, in view of the 20-20-20 objectives of the Union countries expected by 2020, reconfirming their commitment to an increasingly eco-sustainable future.        Exclusive: a milestone in the evolution of Beretta Combustion and electronics, i.e. the heart and brain of EXCLUSIVE, entirely designed in the Research and Development Laboratories of the historic Lecco headquarters, mark a turning point in Beretta's mural evolution and are the result of the spirit of innovation that has distinguished the brand since its origins. With EXCLUSIVE, the novelty of the project fits perfectly into the tradition of know-how and takes on a linear design, which reworks some aesthetic lines of the first boiler models in a modern key, in perfect continuity of style. Continuity that is also manifested in the re-proposition of the EXCLUSIVE name, which has always characterized the top of the Beretta range, with exclusive features and advantages. Class A+ system using only the BeSMART WiFi Comfort Control (optional) .   "talking" interface The control panel is one of the distinctive elements of EXCLUSIVE which confirms its innovative profile. In fact, there are many EXCLUSIVE functions, all to be discovered, through a modern 3.5” backlit LCD display, which communicates with the user through texts and icons. By means of the intuitive silk-screened operating keys it is also possible to access the settings and parameterizations of the boiler and the system. GREEN GEM OF EXCLUSIVE: LED light bar that signals the current operating status of the boiler, reflecting on the casing even with the door closed.   Exclusive Features: HOURLY PROGRAMMING : Programmable heating by hour and by single zone INTELLIGENT SYSTEM FILLING Autonomous filling activation and total safety SYSTEM PRESSURE Displayed DATE AND TIME Display as screensaver PREHEATING Domestic hot water preheating activation SCHEDULED MAINTENANCE Intelligent system that warns the user when boiler maintenance is due   Everywhere Exclusive: Thanks to BeSMART, Beretta's WiFi Comfort Control, controlling and managing home comfort is now possible wherever you are, through a simple and intuitive App, via smartphone and tablet. EXCLUSIVE is compatible with all BeSMART functions, even the most advanced. From home heating professionals, easy management of home comfort. Even away from home   Electronic injection combustion The ACC system, designed and developed by Beretta, allows in all circumstances to offer "first class" functionality, efficiency and low emissions. Using a sensor for detecting the flame ionisation current, which allows the electronics to continuously modulate the quantity of fuel injected, the system keeps the air/gas mixture constant at optimal values ​​over the entire modulation range of the delivered power. Thanks to the ACC system, combustion adjusts itself, thus eliminating the need for any calibration and allowing the boiler to operate with different gas compositions. Particular attention is paid to CO emissions, through a self-diagnosis that intervenes on the burner before the emission threshold allowed by the legislation is exceeded. [A] Cylindrical burner in stainless steel [B] Integrated electronic board [C] Traditional ga valve with modulator [D] Modulating fan with Hall effect     Hybrid Ready EXCLUSIVE is a HYBRID READY solution. The boiler was born as a fundamental element of the offer of HYBRID READY products, which constitute the new hybrid technology system conceived and developed in the Beretta Research Laboratories. This system, created to meet the current and future needs of integration and governance of the various energy sources (Gas/Electricity/Renewables), also includes the most innovative methods of energy accumulation and distribution. EXCLUSIVE, AS A HYBRID READY SOLUTION, IS THE IDEAL CHOICE FOR THOSE WHO WANT TO LOOK AHEAD AND INVEST IN A PRODUCT WHICH WILL MAINTAIN ITS ITS VALUE UNCHANGED OVER TIME. Thanks to the new communication BUS with which it is equipped, EXCLUSIVE is able to interact perfectly with the Energy Manager REC 10H, a real thinking brain that constantly monitors the hybrid system created, to always offer the best comfort in an efficient and effective way. The Beretta hybrid, distinguishing itself for its modular approach to the world of multi-energies, is therefore able to offer increasingly tailored comfort and to evolve over time, with the inclusion of new components that increase efficiency   Beretta is “ERP”. The concrete commitment towards an eco-sustainable future   The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU.  The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands.   In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with a nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency.   Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

BERETTA METEO GREEN AND BOX 25 CNG or LPG CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Code: 20104066 METEO GREEN E BOX : it is a class A+ system without the addition of options Very high modulation BeSMART comfort control as standard Frost protection down to -15°C as standard Thermoregulation with standard external probe New condensing exchanger in aluminum with high flow rate and front access Specific for use in built-in BOX Low polluting emissions: class 6 (UNI EN 15502) Low consumption modulating circulator head 6m (can be modified up to 7m) IPX5D electrical protection degree Possibility of intubating flues with the special flue in PP ø 60 (up to 23 m) and ø 50 (up to 19 m)* Plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres model 25 E Technical data table: Heating Nominal heat input kW kcal/h 20.00 17200 DHW Nominal heat input kW kcal/h 25.00 21500 Warm-up exercise Maximum pressure bar 3 3 3 Minimum pressure for standard operation bar 0.25 - 0.45 0.25 - 0.45 0.25 - 0.45 Maximum temperature °C 90 90 90 Sanitary practice: Maximum pressure bar 6 6 - Minimum pressure bar 0.15 0.15 - Dimensions and weight Height - Width - Depth Height - Width - Depth (BOX version) mm 890 - 553 - 274 1223 - 655 - 287 Weight kg. 46 Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features: Heating energy efficiency Class A; Sanitary energy efficiency profile XL Class A; Nominal heat input 25 kW; Sanitary thermal capacity: 32 kW; Nominal thermal power 6 kW; Expansion capacity: 10 l; Quantity of hot water with Δt=25°C: 18 l/min; flow rate sanitary water: 2 l/min; Sanitary water temperature: 35 - 60°C; Power supply: Methane NOx class 5; Max temperature pressure /°C3/90 bar; Pressure (min./max.): -/8 bar; Boiler capacity: 60 l; Pump: from max system to flow rate mbar /lt/h 375 / 1000; Smoke exhaust kit; General characteristics Effective and Safe The boiler is made up of control systems for the presence of the flame, the correct emission of fumes, temperatures and pressures. It is also equipped with a circulator and a three-way valve with anti-blocking cycles which guarantee correct operation. The boiler allows climatic regulation, which can be activated via the external probe set up for connection to the Beretta remote control panel (optional) which allows you to easily check and check the status of the appliance. High technology Mynute Boiler Green, thanks to the stainless steel kettle, is able to dispense a lot of hot water. The accumulation is equipped with a magnesium anode to offer protection against stray currents and, thanks to the wide flange, the boiler is easily inspectable. To reduce gas consumption, protective insulation is used which prevents the water from cooling down, minimizing the need to ignite the burner to bring the storage back up to temperature. Mynute Boiler Green also offers a standard DHW expansion vessel and is equipped with a predisposition for DHW recirculation (via optional kit). Thanks to the display on the dashboard, information on the status of the appliance is immediately available. Filling the system is easy to do through the appropriate tap.  The new Mynute Boiler Green is equipped with a simple control panel. Composed Two knobs that allow you to select all the functions necessary for using the boiler. The heating knob also allows activation of the Amico Climate System. FRIENDLY CLIMATE system: And the function that manages according to the external climatic situation, regulates the temperature inside the house, in fact it is active only when the delivery temperature in heating mode is set between 55 and 65 °C, in fact it automatically increases by 5 ° C every 20 minutes if heat is required. Dimensions (HxWxD): 950x600x450mm; 61kg

Read more less

BERETTA WALL-MOUNTED BOILER Open chamber MYNUTE 24 CAI LX Low Nox 24 kw CNG cod. 20151436 Mynute LOW NOX Nominal heat input kW 25.80 Nominal thermal power (80 - 60 °C) kW 24.05 Reduced thermal power (80 - 60 °C) kW 11.28 Reduced heat input kW 12.5 Electric power Watt 115 Supply voltage / frequency Volt/Hz 230 / 50 Electrical protection degree IP X5D Useful efficiency at Pn max ((80 - 60 °C) % 93.2 Useful efficiency at 30% of Pn (47 °C return) % 91.8 POLLUTANT EMISSIONS (G20) NOx according to UNI EN 483 class 5 HEATING EXERCISE Maximum pressure and temperatures bar/°C 3 / 90 Heating temperature selection range °C 40 / 80 Pump: pump head available for the system mbar 275 at a flow rate of 1000 litres/h Expansion vessel capacity 9 litres HEALTHCARE EXERCISE Maximum pressure 6 bar Minimum pressure bar 0.15 Quantity of hot water with ∆t=25°C litres/min 14 Minimum domestic water flow rate litres/min 2 DHW temperature selection range °C 37 - 60 CONNECTIONS Heating inlet - outlet Ø 3/4” DHW inlet - outlet Ø 1/2” Gas inlet Ø 3/4” COAXIAL FUME EXHAUST AND AIR INTAKE PIPES Diameter mm 60 - 100 Maximum length 2.5 m Loss for inserting a 90° / 45° bend m 1.5 / 1 SEPARATE FUME EXHAUST AND AIR INTAKE PIPES Diameter mm 80 + 80 Maximum length m 14 + 14 Loss for inserting a 90° / 45° bend m 1.7 / 1.2 DIMENSIONS, WEIGHT, GAS Boiler size (HxLxP) mm 780x400x338 Weight kg 35 Wall mounted boiler Beretta MYNUTE 24 CAI LX natural draft open instant combined methane Heating capacity 24kW and DHW (l/min-?t 25°C) 14, with low Nox emissions, specifically designed to facilitate the replacement of pre-existing wall boilers, Simple and intuitive digital display. Technical features: New boilers with low NOx emissions Low consumption circulator (EEI?0.20) as standard Specifically designed to facilitate the replacement of pre-existing wall-mounted boilers 9 liter expansion tank Simple and intuitive digital display Predisposition for climatic thermoregulation (optional external probe)Predisposition for connection to the BeSMART Comfort control (code 20143539) IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps (optional) The ecological burner To reach high standards Mynute Low NOx is equipped with a special atmospheric burner, cooled and equipped with nozzles in number superior, which allows the specification premixing of gas and air. In this how combustion occurs a temperatures lower than usual in a traditional burner. The burner consists of a surface on the which develops the high flame few millimeters, also called "microflame". The tube that passes through the burner with the return water from the system heating promotes cooling of the burner surface. Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

Gas water heater Beretta Idrabalcony LX 11 l Methane Low Nox 20144195 CNG code: 20144195 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: M Sanitary energy efficiency (ηwh) % 75.4 Daily gas consumption (Qfuel) kW/h 8.109 Annual gas consumption (AFC) GJ 6 Daily electricity consumption (Qelec) kWh 0.065 Annual electricity consumption (AEC) kWh 14 Sound power level indoors (LWA) dB(*) Emissions of nitrogen oxides (Nox) mg/kWh 33 Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 9.4 Nominal heat input (G20-G30-G31) kW 22.20 Nominal thermal power (G20-G30-G31) kW 19.71 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar 28-30/37 Gas connection Ø 3/4 Smoke temperature (max-min) G20 / G30 / G31 °C 140-80/ 121-64 / 124-60 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX5D Dimensions and weight Dimensions (H×W×D) mm 699×408×260 Net weight kg 21 Gas versions available - Methane/LPG Idrabalcony Lx Beretta presents IDRABALCONY Lx , the new line of instantaneous water heaters specific for outdoor use, with very low emissions and direct smoke outlet. As underlined by the name, Idrabalcony is the ideal line for installation on balconies and in general exposed from the outside, as it does not require flues or smoke channels, a very appreciable feature both for the reduced aesthetic impact and for the ease of use. installation. Idrabalconu Lx, in line with the recent European NOx regulations, further reduces the environmental impact by lowering the limit of harmful emissions from combustion. The range is divided into 3 models of 11, 13 and 17 litres , available with both methane and LPG codes, to satisfy all domestic hot water production needs. The high temperature stability of the hot water supplied, even in the case of minimal withdrawals, completes the profile of this new water heater, placing it among the best products in the reference segment. Wide range of 11, 13 and 17 lt sealed chamber water heaters for outdoor use, also with LPG. CLASS A sanitary energy efficiency Very low NOx emissions (nitrogen oxides), to protect the environment, according to Regulation (EU) 814/2013 Modern and compact design, which can be easily integrated into any context. Innovative user interface with backlit display, icon language and 4 command keys. Temperature stability of the hot water supplied, even in the case of small withdrawals. Anti-scald function, which can be set from the display, to set the maximum water dispensing temperature. Arrangement for integration with solar thermal, with function that can be activated from the display. THE IDRABALCONY* LX MODEL, SPECIFIC FOR OUTDOORS, DOES NOT NEED CHIMNEY OR SMOKE CHANNELS (A2 TYPE APPLIANCE), FACILITATE INSTALLATION AND REDUCE THE AESTHETIC IMPACT Burner Features: - Water-cooled hyperstoichiometric burner - Wide flame modulation -High thermal capacity, maximum sanitary comfort The new IDRABALCONY Lx line is able to satisfy the most demanding requirements in terms of low emissions, in force since September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/kWh . Thanks to the innovative Idrabalcony Lx burner, of the hyperstoichiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The new IDRABALCONY Lx are characterized by the new electronics which, combined with the modern and linear design, result in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40 x 60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Gas water heater Beretta Idrabalcony LX 13 l Methane Low Nox 20144197 CNG code: 20144197 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: L Sanitary energy efficiency (ηwh) % 80.2 Daily gas consumption (Qfuel) kW/h 15.175 Annual gas consumption (AFC) GJ 11 Daily electricity consumption (Qelec) kWh 0.069 Annual electricity consumption (AEC) kWh 15 Sound power level indoors (LWA) dB(*) Emissions of nitrogen oxides (Nox) mg/kWh 33 Typology: Sealed Chamber Power supply: methane Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 11 Nominal heat input (G20-G30-G31) kW 25 Nominal thermal power (G20-G30-G31) kW 22.93 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar 28-30/37 Gas connection Ø 3/4 Smoke temperature (max-min) G20 / G30 / G31 °C 156-84 / 123-63 / 129-69 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX5D Dimensions and weight Dimensions (H×W×D) mm 699×408×260 Net weight kg 21 Gas versions available - Methane/LPG Idrabalcony Lx Beretta presents IDRABALCONY Lx , the new line of instantaneous water heaters specific for outdoor use, with very low emissions and direct smoke outlet. As underlined by the name, Idrabalcony is the ideal line for installation on balconies and in general exposed from the outside, as it does not require flues or smoke channels, a very appreciable feature both for the reduced aesthetic impact and for the ease of use. installation. Idrabalconu Lx, in line with the recent European NOx regulations, further reduces the environmental impact by lowering the limit of harmful emissions from combustion. The range is divided into 3 models of 11, 13 and 17 litres , available with both methane and LPG codes, to satisfy all domestic hot water production needs. The high temperature stability of the hot water supplied, even in the case of minimal withdrawals, completes the profile of this new water heater, placing it among the best products in the reference segment. Wide range of 11, 13 and 17 lt sealed chamber water heaters for outdoor use, also with LPG. CLASS A sanitary energy efficiency Very low NOx emissions (nitrogen oxides), to protect the environment, according to Regulation (EU) 814/2013 Modern and compact design, which can be easily integrated into any context. Innovative user interface with backlit display, icon language and 4 command keys. Temperature stability of the hot water supplied, even in the case of small withdrawals. Anti-scald function, which can be set from the display, to set the maximum water dispensing temperature. Arrangement for integration with solar thermal, with function that can be activated from the display. THE IDRABALCONY* LX MODEL, SPECIFIC FOR OUTDOORS, DOES NOT NEED CHIMNEY OR SMOKE CHANNELS (A2 TYPE APPLIANCE), FACILITATE INSTALLATION AND REDUCE THE AESTHETIC IMPACT Burner Features: - Water-cooled hyperstoichiometric burner - Wide flame modulation -High thermal capacity, maximum sanitary comfort The new IDRABALCONY Lx line is able to satisfy the most demanding requirements in terms of low emissions, in force since September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/kWh . Thanks to the innovative Idrabalcony Lx burner, of the hyperstoichiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The new IDRABALCONY Lx are characterized by the new electronics which, combined with the modern and linear design, result in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40 x 60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Gas water heater Beretta Idrabalcony LX 17 l LPG Low Nox 20144231 CNG code: 20144231 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: XL Sanitary energy efficiency (ηwh) % 82 Daily gas consumption (Qfuel) kW/h 24,225 Annual gas consumption (AFC) GJ 18 Daily electricity consumption (Qelec) kWh 0.082 Annual electricity consumption (AEC) kWh 18 Sound power level indoors (LWA) dB(*) Emissions of nitrogen oxides (Nox) mg/kWh 40 Typology: Sealed Chamber Power supply: LPG Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 13.2 Nominal heat input (G20-G30-G31) kW 30 Nominal thermal power (G20-G30-G31) kW 27.63 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar - / 37 Gas connection Ø 3/4 Smoke temperature (max-min) G20 / G30 / G31 °C 157-90 / - / 137-61 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX5D Dimensions and weight Dimensions (H×W×D) mm 699×408×260 Net weight kg 22 Gas versions available - Methane/LPG Idrabalcony Lx Beretta presents IDRABALCONY Lx , the new line of instantaneous water heaters specific for outdoor use, with very low emissions and direct smoke outlet. As underlined by the name, Idrabalcony is the ideal line for installation on balconies and in general exposed from the outside, as it does not require flues or smoke channels, a very appreciable feature both for the reduced aesthetic impact and for the ease of use. installation. Idrabalconu Lx, in line with the recent European NOx regulations, further reduces the environmental impact by lowering the limit of harmful emissions from combustion. The range is divided into 3 models of 11, 13 and 17 litres , available with both methane and LPG codes, to satisfy all domestic hot water production needs. The high temperature stability of the hot water supplied, even in the case of minimal withdrawals, completes the profile of this new water heater, placing it among the best products in the reference segment. Wide range of 11, 13 and 17 lt sealed chamber water heaters for outdoor use, also with LPG. CLASS A sanitary energy efficiency Very low NOx emissions (nitrogen oxides), to protect the environment, according to Regulation (EU) 814/2013 Modern and compact design, which can be easily integrated into any context. Innovative user interface with backlit display, icon language and 4 command keys. Temperature stability of the hot water supplied, even in the case of small withdrawals. Anti-scald function, which can be set from the display, to set the maximum water dispensing temperature. Arrangement for integration with solar thermal, with function that can be activated from the display. THE IDRABALCONY* LX MODEL, SPECIFIC FOR OUTDOORS, DOES NOT NEED CHIMNEY OR SMOKE CHANNELS (A2 TYPE APPLIANCE), FACILITATE INSTALLATION AND REDUCE THE AESTHETIC IMPACT Burner features: - Water-cooled hyperstoichiometric burner - Wide flame modulation -High thermal capacity, maximum sanitary comfort The new IDRABALCONY Lx line is able to satisfy the most demanding requirements in terms of low emissions, in force since September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/kWh . Thanks to the innovative Idrabalcony Lx burner, of the hyperstoichiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The new IDRABALCONY Lx are characterized by the new electronics which, combined with the modern and linear design, result in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40 x 60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Wall mounted boiler Beretta open chamber MYNUTE 28 CAI LX METHANE code 20151436 low NOx Mynute S 28 CAI Product Typology: OPEN CHAMBER WALL BOILER Typology: Mural Use: Heating/Sanitary Boiler installation: Internal Accumulator (boiler): Instantaneous Heating nominal maximum useful power (kw): 28.80 Simple and intuitive digital display. Technical features: New boilers with low NOx emissions Low consumption circulator (EEI?0.20) as standard Specifically designed to facilitate the replacement of pre-existing wall-mounted boilers 9 liter expansion vessel Simple and intuitive digital display Predisposition for climatic thermoregulation (optional external probe)Predisposition for connection to the BeSMART Comfort control (code 20143539) IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps (optional) The ecological burner To reach high standards Mynute Low NOx is equipped with a special atmospheric burner, cooled and equipped with nozzles in number superior, which allows the specification premixing of gas and air. In this how combustion occurs a temperatures lower than usual in a traditional burner. The burner consists of a surface on the which develops the high flame few millimeters, also called "microflame". The tube that passes through the burner with the return water from the system heating promotes cooling of the burner surface. Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Series : Short Power 18000 Btu Wi-Fi Optional SET code (indoor + outdoor) 20160477 COOLING PERFORMANCE Capacity at nominal air flow kW 5.20 Absorbed power at nominal air flow kW 1.61 SEER kW/kW 6.80 Energy class A++ Annual energy consumption kWh/a 268 PERFORMANCE IN HEATING Capacity at nominal air flow kW 6.00 Absorbed power at nominal air flow kW 1.61 SCOP kW/kW 4.00 Energy class A+ Annual energy consumption kWh/a 1819 OUTDOOR UNIT SOUND LEVELS Sound power dB(A) 63 Sound pressure dB(A) 51 SOUND LEVELS INDOOR UNIT IN COOLING Sound power dB(A) 58 Super minimum/maximum sound pressure dB(A) 21/44 CONNECTIONS Connections for liquid/gas pipes 6.35/12.7 mm Maximum length 25m DIMENSIONS Indoor unit HxWxD mm 318/1008/225 Outdoor unit HxWxD mm 614/820/338 SHORT BERETTA PRESENTS BREVA, THE NEW WALL-MOUNTED MONOSPLIT INVERTER AIR CONDITIONER, WITH R32 HEAT PUMP, WITH LOW ENVIRONMENTAL IMPACT. The new BREVA air conditioner, for summer and winter air conditioning in residential environments, is able to offer you the best comfort and maximum efficiency. The range is divided into 3 models equipped with Inverter technology, capable of responding to all needs. The Inverter technology allows the power absorbed by the air conditioner to be adapted continuously, reducing or increasing it according to the needs of the environment, guaranteeing a and the reduction of electricity consumption. Efficiency and elegance Beretta, which has always been a leader in research into the efficiency of its products, ensures that BREVA air conditioners have been designed to offer this feature both in summer cooling and in winter heating. Efficiency is synonymous with a reduction in electricity consumption and in the BREVA offer, the Class A++ models are equivalent to low running costs. Design The BREVA indoor unit stands out for the refined aesthetic finish and the quality of the materials with which it was made, as well as for the technical solutions for the operating information that complete it. These features allow easy insertion inside homes. Even the construction details of the outdoor units have been particularly taken care of in order to avoid their deterioration, even after many years of exposure to atmospheric agents. Comfort There are many factors that create environmental comfort and BREVA air conditioners are able to control them all. In addition to the perfect stability of the room temperature, the continuous air cleaning action is added, carried out through the antibacterial and photocatalytic filters, to offer a healthier environment. Thanks to the DRY dehumidification function, optimal humidity values ​​are always guaranteed. The internal units of the BREVA series are also distinguished by the breadth of the air flow range they are able to handle. R32 refrigerant gas Beretta BREVA air conditioners use R32 refrigerant gas, with low environmental impact. The new gas has numerous performance advantages, allowing the units to reach up to efficiency class A++, as well as complying with the new European Regulation for the reduction of the environmental impact of fluorinated gases in the atmosphere. Air filtration Thanks to the combined action of the supplied filters (antibacterial and photocatalytic), BREVA guarantees an optimal level of air quality. LED display Indoor unit equipped with LED DISPLAY to display the temperature, compressor operation and any error messages. The display can be disabled, using the "light" button on the remote control, to ensure maximum comfort during the night. Super silent Environmental comfort is also linked to the sound level and is especially important in bedrooms or studios. The BREVA series allows you to guarantee the ideal climate all year round with a sound level that is virtually imperceptible to the human ear (20 dB(A)). This function can be activated both in heating and cooling mode. Night function Selecting the "SLEEP" button on the remote control sets the night function which regulates the operation of the air conditioner to ensure maximum comfort. In cooling, it increases the temperature set by the user by 1 °C, with hourly intervals, for the first 2 hours, and maintains the temperature reached for 6 hours before going off. In heating, the set temperature decreases by 2 °C, with hourly intervals, for the first 2 hours; after 3 hours it increases the temperature by 2 °C, for a duration of 3 hours, before going off. Always connected With the Wi-Fi kit available as an accessory, the comfort of your home can be managed comfortably even away from home. Through the dedicated Beretta App, which can be downloaded free of charge for iOS and Android systems, it is possible to set the operating mode, the time programming and check the operating status from Smartphones and tablets. Product Guarantee: All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Technical features Model Series : SHORT Power : 12000 Btu Wi-Fi Optional SET code (indoor + outdoor) 20160473 COOLING PERFORMANCE Capacity at nominal air flow kW 2.60 Absorbed power at nominal air flow kW 0.80 SEER kW/kW 6.20 Energy class A++ Annual energy consumption kWh/a 147 PERFORMANCE IN HEATING Capacity at nominal air flow kW 3.40 Absorbed power at nominal air flow kW 0.91 SCOP kW/kW 4.00 Energy class A+ Annual energy consumption kWh/a 839 OUTDOOR UNIT SOUND LEVELS Sound power dB(A) 60 Sound pressure dB(A) 46 SOUND LEVELS INDOOR UNIT IN COOLING Sound power dB(A) 21/52 Super minimum/maximum sound pressure dB(A) 21/35 CONNECTIONS Connections for liquid/gas pipes 6.35/9.52 mm Maximum length 15m DIMENSIONS Indoor unit HxWxD mm 280/820/195 Outdoor unit HxWxD mm 540/780/245 SHORT BERETTA PRESENTS BREVA, THE NEW WALL-MOUNTED MONOSPLIT INVERTER AIR CONDITIONER, WITH R32 HEAT PUMP, WITH LOW ENVIRONMENTAL IMPACT. The new BREVA air conditioner, for summer and winter air conditioning in residential environments, is able to offer you the best comfort and maximum efficiency. The range is divided into 3 models equipped with Inverter technology, capable of responding to all needs. The Inverter technology allows the power absorbed by the air conditioner to be adapted continuously, reducing or increasing it according to the needs of the environment, guaranteeing a and the reduction of electricity consumption. Efficiency and elegance Beretta, which has always been a leader in research into the efficiency of its products, ensures that BREVA air conditioners have been designed to offer this feature both in summer cooling and in winter heating. Efficiency is synonymous with a reduction in electricity consumption and in the BREVA offer, the Class A++ models are equivalent to low running costs. Design The BREVA indoor unit stands out for the refined aesthetic finish and the quality of the materials with which it was made, as well as for the technical solutions for the operating information that complete it. These features allow easy insertion inside homes. Even the construction details of the outdoor units have been particularly taken care of in order to avoid their deterioration, even after many years of exposure to atmospheric agents. Comfort There are many factors that create environmental comfort and BREVA air conditioners are able to control them all. In addition to the perfect stability of the room temperature, the continuous air cleaning action is added, carried out through the antibacterial and photocatalytic filters, to offer a healthier environment. Thanks to the DRY dehumidification function, optimal humidity values ​​are always guaranteed. The internal units of the BREVA series are also distinguished by the breadth of the air flow range they are able to handle. R32 refrigerant gas Beretta BREVA air conditioners use R32 refrigerant gas, with low environmental impact. The new gas has numerous performance advantages, allowing the units to reach up to efficiency class A++, as well as complying with the new European Regulation for the reduction of the environmental impact of fluorinated gases in the atmosphere. Air filtration Thanks to the combined action of the supplied filters (antibacterial and photocatalytic), BREVA guarantees an optimal level of air quality. LED display Indoor unit equipped with LED DISPLAY to display the temperature, compressor operation and any error messages. The display can be disabled, using the "light" button on the remote control, to ensure maximum comfort during the night. Super silent Environmental comfort is also linked to the sound level and is especially important in bedrooms or studios. The BREVA series allows you to guarantee the ideal climate all year round with a sound level that is virtually imperceptible to the human ear (20 dB(A)). This function can be activated both in heating and cooling mode. Night function Selecting the "SLEEP" button on the remote control sets the night function which regulates the operation of the air conditioner to ensure maximum comfort. In cooling, it increases the temperature set by the user by 1 °C, with hourly intervals, for the first 2 hours, and maintains the temperature reached for 6 hours before going off. In heating, the set temperature decreases by 2 °C, with hourly intervals, for the first 2 hours; after 3 hours it increases the temperature by 2 °C, for a duration of 3 hours, before going off. Always connected With the Wi-Fi kit available as an accessory, the comfort of your home can be managed comfortably even away from home. Through the dedicated Beretta App, which can be downloaded free of charge for iOS and Android systems, it is possible to set the operating mode, the time programming and check the operating status from Smartphones and tablets. Product Guarantee: All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Technical features Series : Short Power 24000 Btu Wi-Fi Optional COOLING PERFORMANCE Capacity at nominal air flow kW 7.00 Absorbed power at nominal air flow kW 2.16 SEER kW/kW 7.10 Energy class A++ Annual energy consumption kWh/a 350 PERFORMANCE IN HEATING Capacity at nominal air flow kW 8.10 Absorbed power at nominal air flow kW 2.18 SCOP kW/kW 4.00 Energy class A+ Annual energy consumption kWh/a 1963 OUTDOOR UNIT SOUND LEVELS Sound power dB(A) 65 Sound pressure dB(A) 52 SOUND LEVELS INDOOR UNIT IN COOLING Sound power dB(A) 60 Super minimum/maximum sound pressure dB(A) 30/47 CONNECTIONS Connections for liquid/gas pipes 6.35/12.7 mm Maximum length 25m DIMENSIONS Indoor unit HxWxD mm 335/1125/240 Outdoor unit HxWxD mm 697/890/353 SHORT BERETTA PRESENTS BREVA, THE NEW WALL-MOUNTED MONOSPLIT INVERTER AIR CONDITIONER, WITH R32 HEAT PUMP, WITH LOW ENVIRONMENTAL IMPACT. The new BREVA air conditioner, for summer and winter air conditioning in residential environments, is able to offer you the best comfort and maximum efficiency. The range is divided into 3 models equipped with Inverter technology, capable of responding to all needs. The Inverter technology allows the power absorbed by the air conditioner to be adapted continuously, reducing or increasing it according to the needs of the environment, guaranteeing a and the reduction of electricity consumption. Efficiency and elegance Beretta, which has always been a leader in research into the efficiency of its products, ensures that BREVA air conditioners have been designed to offer this feature both in summer cooling and in winter heating. Efficiency is synonymous with a reduction in electricity consumption and in the BREVA offer, the Class A++ models are equivalent to low running costs. Design The BREVA indoor unit stands out for the refined aesthetic finish and the quality of the materials with which it was made, as well as for the technical solutions for the operating information that complete it. These features allow easy insertion inside homes. Even the construction details of the outdoor units have been particularly taken care of in order to avoid their deterioration, even after many years of exposure to atmospheric agents. Comfort There are many factors that create environmental comfort and BREVA air conditioners are able to control them all. In addition to the perfect stability of the room temperature, the continuous air cleaning action is added, carried out through the antibacterial and photocatalytic filters, to offer a healthier environment. Thanks to the DRY dehumidification function, optimal humidity values ​​are always guaranteed. The internal units of the BREVA series are also distinguished by the breadth of the air flow range they are able to handle. R32 refrigerant gas Beretta BREVA air conditioners use R32 refrigerant gas, with low environmental impact. The new gas has numerous performance advantages, allowing the units to reach up to efficiency class A++, as well as complying with the new European Regulation for the reduction of the environmental impact of fluorinated gases in the atmosphere. Air filtration Thanks to the combined action of the supplied filters (antibacterial and photocatalytic), BREVA guarantees an optimal level of air quality. LED display Indoor unit equipped with LED DISPLAY to display the temperature, compressor operation and any error messages. The display can be disabled, using the "light" button on the remote control, to ensure maximum comfort during the night. Super silent Environmental comfort is also linked to the sound level and is especially important in bedrooms or studios. The BREVA series allows you to guarantee the ideal climate all year round with a sound level that is virtually imperceptible to the human ear (20 dB(A)). This function can be activated both in heating and cooling mode. Night function Selecting the "SLEEP" button on the remote control sets the night function which regulates the operation of the air conditioner to ensure maximum comfort. In cooling, it increases the temperature set by the user by 1 °C, with hourly intervals, for the first 2 hours, and maintains the temperature reached for 6 hours before going off. In heating, the set temperature decreases by 2 °C, with hourly intervals, for the first 2 hours; after 3 hours it increases the temperature by 2 °C, for a duration of 3 hours, before going off. Always connected With the Wi-Fi kit available as an accessory, the comfort of your home can be managed comfortably even away from home. Through the dedicated Beretta App, which can be downloaded free of charge for iOS and Android systems, it is possible to set the operating mode, the time programming and check the operating status from Smartphones and tablets. Product Guarantee: All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less