Explore our collection of Beretta products: boilers, water heaters and heating systems. Choose quality and reliability with Beretta. Achieve maximum comfort and energy efficiency with our high-end products. Find out more and find the perfect solution for your heating needs. Buy online today and trust the Beretta brand, synonymous with excellence in the sector.
ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Beretta CIAO AT 29 csi LOW NoX condensing boiler Complete with smoke kit Cod. 20151830 Technical specifications according to ErP directives Model: HELLO AT LOW NOx Sanitary energy efficiency class: A Energy efficiency class in heating: B Load profile: XL Product code 20151830 LPG supply Technical features: Indoor/Outdoor installation Nominal heat input 28 kW Nominal thermal power 26.8 kW Nominal thermal power at partial load (30%) 8.5 kW Useful efficiency at nominal power 86.3% n4 New version NOx < 56 mg/kWh IPX5D electrical protection degree Dimensions Dimensions h/w/d (mm): 780/452/336 HELLO AT new LOW NOx model Hi AT, ideal for replacement in systems with radiators Ciao AT is the innovative condensing boiler specifically designed by Beretta for traditional high temperature systems (radiators and radiators). The boiler is equipped with a heat recovery unit on the fumes and combustion in a sealed chamber; this allows to obtain very high performance in terms of efficiency and therefore a significant energy saving. New burner with low NOx emissions Specific for systems with radiators and radiators (at high temperature) Condensing post exchanger in aluminum alloy Possibility of outdoor installation with antifreeze heater kit (optional) IPX5D electrical protection degree Environmental Self-Regulation System (SARA) Low consumption circulator 6 m (EEI≤0.20) Hydraulic connections cover (optional) Condensate collection neutralizer drawer kit (optional) Template, hydraulic fittings, gas and sanitary taps (optional) High performance and low consumption In the Ciao AT boiler, the water in the primary circuit passes through an additional exchanger, which allows you to recover energy that would otherwise be wasted. This process makes it possible to recover latent heat and therefore to further increase the performance of the boiler. The energy saving offered by a boiler is greater the higher its efficiency: Ciao AT therefore allows you to reduce gas consumption compared to a boiler without an additional exchanger. The management The electronic panel is the interface for managing the boiler. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. The liquid crystal display provides information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function. Compatible with BeSMART The BeSMART WiFi Comfort Control Panel, optional compatible with Ciao AT, is the remote boiler management device with modulating chronothermostat functions. With the WiFi Box accessory, included in the BeSMART WiFi Comfort Control, it is also possible to manage comfort remotely using Smartphones and Tablets. The BeSMART WiFi control is very simple to install and intuitive to use and allows you to adjust the parameters and activate the many functions on the boiler. A large liquid crystal display shows all important information. Using the buttons on the control, the temperature of the heating water and domestic hot water is set easily and intuitively and the heating time programming is carried out. Outdoor installation Ciao AT is designed to also be installed outdoors in partially protected places thanks to the dedicated accessories (bottom cover kit and top cover kit) and board antifreeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit with which the lower cover is required. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€834,00
Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Seasonal heating efficiency % 94 Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 20/25 kW Heating nominal heat output: 19.64 kW Efficiency at rated power: 98.2% Efficiency at reduced load (30%): 103.4% Max electric power heating Watt 80 Electrical protection degree IP X5D Expansion vessel capacity 8 litres Quantity of hot water with Δt=25°C: 14 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 780x400x365 ; 38kg METHANE power supply Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control) Mynute Green E - ErP System energy class A+ (in combination with external probe and Rec 08 remote panel) Heating energy class A Energy class of the sanitary A New condensing exchanger Modulation 1:5 Flex low consumption circulator (IEE≤0.20) Ducting with flue Ø 50 mm The new Mynute Green E range is designed following the ecodesign indications provided for by the European ErP Directive and is made up of two combined models and a heating only model. The combined versions have a thermal capacity of 20-25 kW and 25-30 kW, values which refer respectively to heating and DHW; similarly, the heating only version has a thermal capacity of 25-30 kW. The range offers as standard the new front access condensing exchanger with improved efficiency (94% seasonal efficiency), the low consumption modulating circulator, the predisposition for the clapet kit (optional) to be used for pressurized flues and the high pressure fan. prevalence to be able to carry out the ducting of flues with Ø 60 or Ø 50 exhausts. Mynute Green E: high energy efficiency, low gas consumption and low emissions. The entry into force of the European Directive ErP (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Compulsory labeling provides greater transparency on the characteristics of the products which can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2 ) by 20%, increasing by 20 % use of renewable energies and reduce energy consumption by 20% in EU countries. The new Beretta condenser exchanger with front access The Mynute Green E boiler is equipped with the new Beretta condensing exchanger with front access. An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. With the new Beretta condensing exchanger, boiler performance improves up to an average seasonal efficiency of 94%. Mynute Green E, the elegant The new Mynute Green E is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to easily select all the functions necessary for using and setting the boiler. Flex modulating circulators: optimized performance, low consumption Mynute Green E uses a synchronous modulating circulator with low energy consumption, as required by the European ErP Directive. Thanks to this new technology, the electric motor of the circulator offers an Energy Effi ciency Index of less than 0.20, which means significantly reduced electricity consumption. The new circulator works proportionally to the power supplied by the boiler, thus contributing to a further reduction in electricity consumption. In case of need on the heating system, it is possible to change the head without having to replace the standard circulator with a high head one, the name “Flex” derives from this feature. Up to 49 meters of ducting With Mynute Green E it is possible to comfortably intubate even the most "difficult" flues thanks to the approval for flue Ø 50mm. The main 50mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power. Characteristics: MYNUTE GREEN E + external probe + REC 08 remote control forms a class A+ system Designed according to the ecodesign indications provided for by the European ErP Directive Energy Class > heating (class A) > DHW profile XL (class A) Seasonal heating efficiency 94% Low polluting emissions: class 5 (UNI EN 483) New high-flow aluminum condensing exchanger with front access Standard thermoregulation (optional external probe) ErP boilers with low consumption modulating circulator (EEI0.20) modifiable up to 7m head Hydraulic connections cover (optional) Possibility of intubating flues with the special flue ø 60 in PP and ø 50 in PP (only ErP boilers) Template, plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres Beretta is “ERP”. The concrete commitment towards an eco-sustainable future The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€896,00
Technical features Model : EXCLUSIVE X 25C CNG item code: 20187794 Nominal Power : 20 kW Heating efficiency class: A Sanitary Efficiency Class: A Seasonal Heating Energy Efficiency : 93% Seasonal ACS Energy Efficiency : 86% Auxiliary Electricity Consumption In Standby mode: 3 W At partial load : 13 W Full Load: 27W Technical specifications Heating thermal capacity: 3.6 ~ 20 kW DHW heat output : 3.6 ~ 25 kW Nominal thermal power (80°/60°) : 19.5 kW Nominal thermal power (50°/30°) : 21.32 kW Power supply (V,Hz, Ø) : 220~240/50/1 NOx class : 6 Degree of protection : IP X5D Declared load profile : XL Heating Maximum pressure : 3 bars Temperature : 90°C Membrane expansion tank : 9 l Sanitary Maximum pressure : 8 bars DHW production : 10.8 ~ 15.1 l/min Minimum DHW flow rate : 2 l/min Installation data Heating Inlet-Outlet / Gas Inlet Pipe Diameter: 19.05 mm (3/4") DHW outlet diameter / Boiler flow-return: 12.70 mm (1/2") Maximum length for coaxial outlet (Ø 60-100 mm): 10 m Maximum length for split outlet (Ø 80+80 mm): 60 + 60 m Dimensions and weight Boiler dimensions (HxPxL): 740x275x420 mm Boiler weight: 35 Kg Condensing boiler Beretta Excusive X Technology for a green lifestyle From the R&D laboratories of Beretta comes EXCLUSIVE X , the new condensing boiler that marks a further step in the evolution of the EXCLUSIVE range , whose name has always characterized the top of the brand's wall-mounted offer Combustion and electronics, which represent the heart and brain of the boiler, have been completely redesigned to offer an even more performing product that meets European environmental sustainability objectives EXCLUSIVE X is the ideal choice for those who are not satisfied and are looking for green solutions Exclusive Innovation The new stainless steel exchanger , the innovative electronics with hybrid function integrated in the boiler , without external remote controls, and the ability to process mixtures of natural gas and hydrogen up to 20% give EXCLUSIVE X a highly technological profile, ensuring maximum energy saving, which translates into an economic advantage for the user Exclusive Performances EXCLUSIVE X represents the spearhead of the Beretta offer. Thanks to the new optimized plate exchanger, the range achieves sanitary performance at the top of the category in terms of efficiency, temperature stability and waiting times. The refined ACC electronic combustion system, which allows for continuous modulation of the quantity of fuel delivered, offers "first-class" efficiency and functionality in all circumstances, reducing harmful emissions to a minimum. Exclusive Beretta The new range represents the synthesis of Beretta's advanced research, in continuity of style with the best tradition of the brand . Continuity that manifests itself both in the aesthetics of the product, which takes up the lines of the first Beretta boiler models, reinterpreting them in a modern key, and in the simplicity of use and installation flexibility , among the distinctive features of the brand, which have always been appreciated by the market Technology for Maximum Efficiency A New Heart of Steel EXCLUSIVE X is equipped with a new primary exchanger in stainless steel, with a smooth tube with a large section , to ensure the best efficiency and cleanliness over time. In addition to the high resistance to the corrosive action of acid condensate , stainless steel prevents the internal formation of oxides and other electrochemical phenomena typical of installation on old systems. The single wrapped coil geometry (hydraulic circuit in series) guarantees constant flow in all sections of the exchanger and intrinsically prevents clogging phenomena. The front access facilitates periodic maintenance and cleaning of the combustion chamber Electronic Injection Combustion ACC Combustion The ACC system, refined by Beretta for the EXCLUSIVE X, allows in all circumstances to offer functionality, efficiency and low emissions that are "first in class". Using a sensor for detecting the flame ionisation current, which allows the electronics to continuously modulate the quantity of fuel injected, the system keeps the air/gas mixture constant at optimal values over the entire modulation range of the delivered power (value of constant CO2 ). Thanks to the sophisticated ACC system, combustion adjusts itself, thus eliminating the need for any calibration and allowing the boiler to operate with different gas compositions. Particular attention is paid to CO emissions, through a self-diagnosis that intervenes on the burner before the emission threshold allowed by the legislation is exceeded Advantages of the ACC System Self-adaptation of the system to the type and composition of the gas. Gas conversion kits no longer needed. No Mechanical Calibration or manual interventions on combustion to be carried out on the boiler Maintaining the stoichiometric ratio Constant Air-Gas ratio under any circumstances Continuous Control of Emissions in compliance with operating limits Gas savings maximized compared to traditional systems. Thanks to the constant maintenance of the efficiency at the modulation of the power Self-learning Optimized efficiency and reliability over time, thanks to self-learning with compensation by the ACC system Innovative air filter that prevents the entry of impurities from the air drawn into the burner and exchanger, which can compromise the efficiency of the boiler, also facilitating maintenance. The filter also helps to reduce the noise emissions of the boiler in operation Lower connection cover available as an option for the 25 C and 25 R models, to improve the aesthetic impact and facilitate the integration of filters and accessories New color system display EXCLUSIVE X is equipped with a new advanced interface, which constitutes the intelligence of the boiler's hybrid system . In fact, the new range was born HYBRID READY, i.e. with the possibility of directly managing multi-energy systems, through the boiler interface, without external remote controls. Elegantly covered by a flap with the Beretta logo, the new interface features a backlit color LCD display which communicates with users and/or installers using texts and icons. Using 4 keys it is possible to navigate the display in a simple and intuitive way , accessing all the settings and parameterizations of the boiler and the system. The advanced self-diagnostics , together with the EXCLUSIVE X functions that can be activated from the interface, complete its innovative profile Hourly Programming Programmable heating by hour and by single zone Intelligent System Filling Activation of filling in autonomy and total safety System pressure Displayed Now also display as a screensaver Preheating Domestic hot water preheating activation Scheduled Maintenance Intelligent system that warns the user when boiler maintenance is scheduled The Efficient choice of Hybrid Ready Energies The range was created as a fundamental element of the offer of HYBRID READY products, which make up the hybrid technology system conceived and developed in the Beretta Research Laboratories . This system, created to meet the current and future needs of integration and governance of the various energy sources (Gas/Electricity/Renewables), also includes the most innovative methods of energy accumulation and distribution. EXCLUSIVE X was born with the system intelligence integrated in the boiler , REC 10CH, a real thinking brain that constantly governs and controls the hybrid system created, to always offer the best comfort in an efficient and effective way. The Beretta Hybrid, standing out for its modular approach to the world of multi-energies, is able to evolve over time, with the introduction of new components that increase its overall efficiency Exclusive X See the Future EXCLUSIVE X was born today, designed for the generations of tomorrow. The new range is already set up to operate with mixtures of natural gas and hydrogen - up to a maximum of 20% - in line with the objectives of environmental sustainability and the decarbonisation process launched by the European Union Hydrogen is the sustainable energy source of the future Availability in huge quantities Producibility using low-impact methods and in a sustainable way from renewable sources, such as wind energy, photovoltaics and biomass Reduction of polluting emissions in the percentage relative to its use Real opportunity for change to start the decarbonization process, fight global climate change, improve air and life quality Use cycle of hydrogen Hydrogen is a safe and clean gas, present and available in enormous quantities even in nature. Mixed with natural gas up to a maximum ratio of 20 to 80%, hydrogen makes it possible to generate heat and domestic hot water , helping to minimize polluting emissions. From the combustion of oxygen and hydrogen, and in the quantity of the latter used, water vapor is generated: hydrogen is returned to its most common source of origin, water, and reintroduced into nature Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.320,00
Technical features: Heating energy efficiency Class A; Sanitary energy efficiency profile XL Class A; Nominal heat input 25 kW; Sanitary thermal capacity: 32 kW; Nominal thermal power 6 kW; Expansion capacity: 10 l; Quantity of hot water with Δt=25°C: 18 l/min; flow rate sanitary water: 2 l/min; Sanitary water temperature: 35 - 60°C; Power supply: Methane NOx class 5; Max temperature pressure /°C3/90 bar; Pressure (min./max.): -/8 bar; Boiler capacity: 60 l; Pump: from max system to flow rate mbar /lt/h 375 / 1000; Smoke exhaust kit; General characteristics Effective and Safe The boiler is made up of control systems for the presence of the flame, the correct emission of fumes, temperatures and pressures. It is also equipped with a circulator and a three-way valve with anti-blocking cycles which guarantee correct operation. The boiler allows climatic regulation, which can be activated via the external probe set up for connection to the Beretta remote control panel (optional) which allows you to easily check and check the status of the appliance. High technology Mynute Boiler Green, thanks to the stainless steel kettle, is able to dispense a lot of hot water. The accumulation is equipped with a magnesium anode to offer protection against stray currents and, thanks to the wide flange, the boiler is easily inspectable. To reduce gas consumption, protective insulation is used which prevents the water from cooling down, minimizing the need to ignite the burner to bring the storage back up to temperature. Mynute Boiler Green also offers a standard DHW expansion vessel and is equipped with a predisposition for DHW recirculation (via optional kit). Thanks to the display on the dashboard, information on the status of the appliance is immediately available. Filling the system is easy to do through the appropriate tap. The new Mynute Boiler Green is equipped with a simple control panel. Composed Two knobs that allow you to select all the functions necessary for using the boiler. The heating knob also allows activation of the Amico Climate System. FRIENDLY CLIMATE system: And the function that manages according to the external climatic situation, regulates the temperature inside the house, in fact it is active only when the delivery temperature in heating mode is set between 55 and 65 °C, in fact it automatically increases by 5 ° C every 20 minutes if heat is required. Dimensions (HxWxD): 950x600x450mm; 61kg
€2.295,00
BERETTA METEO GREEN AND BOX 25 CNG or LPG CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Code: 20104066 METEO GREEN E BOX : it is a class A+ system without the addition of options Very high modulation BeSMART comfort control as standard Frost protection down to -15°C as standard Thermoregulation with standard external probe New condensing exchanger in aluminum with high flow rate and front access Specific for use in built-in BOX Low polluting emissions: class 6 (UNI EN 15502) Low consumption modulating circulator head 6m (can be modified up to 7m) IPX5D electrical protection degree Possibility of intubating flues with the special flue in PP ø 60 (up to 23 m) and ø 50 (up to 19 m)* Plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres model 25 E Technical data table: Heating Nominal heat input kW kcal/h 20.00 17200 DHW Nominal heat input kW kcal/h 25.00 21500 Warm-up exercise Maximum pressure bar 3 3 3 Minimum pressure for standard operation bar 0.25 - 0.45 0.25 - 0.45 0.25 - 0.45 Maximum temperature °C 90 90 90 Sanitary practice: Maximum pressure bar 6 6 - Minimum pressure bar 0.15 0.15 - Dimensions and weight Height - Width - Depth Height - Width - Depth (BOX version) mm 890 - 553 - 274 1223 - 655 - 287 Weight kg. 46 Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.986,00
NEW EXCLUSIVE EXCLUSIVE, A NEW STORY BEGINS. Through the innovative ACC electronic injection combustion, HYBRID READY integration and the new project design, EXCLUSIVE offers exclusive advantages in every installation variation. From the new EXCLUSIVE, A NEW STORY BEGINS. construction, redevelopment; from hybrid application in a multi-energy system to simple single installation, EXCLUSIVE represents the current and winning choice for those who are not satisfied and want to look beyond. Characteristics: Electronic injection combustion via ACC system EXCLUSIVE plus only the BeSMART Wi-Fi Comfort Control (optional) forms a class A+ system 94% (ETAs) of energy efficiency in heating Universal installation : Indoor, outdoor and recessed installation. IPX5D electrical protection degree Tempozero installation: Removing the casing NO longer necessary for electrical connections and calibration Low consumption modulating circulator (EEI≤ 0.20) 6 m head, electronically modifiable up to 7 m Hydraulic connections and external probe available as options Frost protection down to -5 °C as standard HYBRID READY boiler , Can be integrated via BUS in a multi-energy system to make boiler operation more effective in relation to other energy sources (can be combined with a Beretta hybrid system using the REC 10H interface available as an accessory) Talking display: User interface for direct communication using TEXT and ICONS Self-adapting: The boiler automatically adapts to different types of gas and installation - ZERO calibrations CO alarm Boiler CO level constantly monitored and calibrated for maximum safety Small size: Thanks to its compactness, EXCLUSIVE can also be easily installed in a wall unit LPG version selectable from parameter Gas transformation kit not necessary Europe strategy With the opening towards the management of multi-energy plants, the reduction of emissions and the optimization of consumption, Beretta signs with EXCLUSIVE the highest contribution in terms of respect for the environment, in view of the 20-20-20 objectives of the Union countries expected by 2020, reconfirming their commitment to an increasingly eco-sustainable future. Exclusive: a milestone in the evolution of Beretta Combustion and electronics, i.e. the heart and brain of EXCLUSIVE, entirely designed in the Research and Development Laboratories of the historic Lecco headquarters, mark a turning point in Beretta's mural evolution and are the result of the spirit of innovation that has distinguished the brand since its origins. With EXCLUSIVE, the novelty of the project fits perfectly into the tradition of know-how and takes on a linear design, which reworks some aesthetic lines of the first boiler models in a modern key, in perfect continuity of style. Continuity that is also manifested in the re-proposition of the EXCLUSIVE name, which has always characterized the top of the Beretta range, with exclusive features and advantages. Class A+ system using only the BeSMART WiFi Comfort Control (optional) . "talking" interface The control panel is one of the distinctive elements of EXCLUSIVE which confirms its innovative profile. In fact, there are many EXCLUSIVE functions, all to be discovered, through a modern 3.5” backlit LCD display, which communicates with the user through texts and icons. By means of the intuitive silk-screened operating keys it is also possible to access the settings and parameterizations of the boiler and the system. GREEN GEM OF EXCLUSIVE: LED light bar that signals the current operating status of the boiler, reflecting on the casing even with the door closed. Exclusive Features: HOURLY PROGRAMMING : Programmable heating by hour and by single zone INTELLIGENT SYSTEM FILLING Autonomous filling activation and total safety SYSTEM PRESSURE Displayed DATE AND TIME Display as screensaver PREHEATING Domestic hot water preheating activation SCHEDULED MAINTENANCE Intelligent system that warns the user when boiler maintenance is due Everywhere Exclusive: Thanks to BeSMART, Beretta's WiFi Comfort Control, controlling and managing home comfort is now possible wherever you are, through a simple and intuitive App, via smartphone and tablet. EXCLUSIVE is compatible with all BeSMART functions, even the most advanced. From home heating professionals, easy management of home comfort. Even away from home Electronic injection combustion The ACC system, designed and developed by Beretta, allows in all circumstances to offer "first class" functionality, efficiency and low emissions. Using a sensor for detecting the flame ionisation current, which allows the electronics to continuously modulate the quantity of fuel injected, the system keeps the air/gas mixture constant at optimal values over the entire modulation range of the delivered power. Thanks to the ACC system, combustion adjusts itself, thus eliminating the need for any calibration and allowing the boiler to operate with different gas compositions. Particular attention is paid to CO emissions, through a self-diagnosis that intervenes on the burner before the emission threshold allowed by the legislation is exceeded. [A] Cylindrical burner in stainless steel [B] Integrated electronic board [C] Traditional ga valve with modulator [D] Modulating fan with Hall effect Hybrid Ready EXCLUSIVE is a HYBRID READY solution. The boiler was born as a fundamental element of the offer of HYBRID READY products, which constitute the new hybrid technology system conceived and developed in the Beretta Research Laboratories. This system, created to meet the current and future needs of integration and governance of the various energy sources (Gas/Electricity/Renewables), also includes the most innovative methods of energy accumulation and distribution. EXCLUSIVE, AS A HYBRID READY SOLUTION, IS THE IDEAL CHOICE FOR THOSE WHO WANT TO LOOK AHEAD AND INVEST IN A PRODUCT WHICH WILL MAINTAIN ITS ITS VALUE UNCHANGED OVER TIME. Thanks to the new communication BUS with which it is equipped, EXCLUSIVE is able to interact perfectly with the Energy Manager REC 10H, a real thinking brain that constantly monitors the hybrid system created, to always offer the best comfort in an efficient and effective way. The Beretta hybrid, distinguishing itself for its modular approach to the world of multi-energies, is therefore able to offer increasingly tailored comfort and to evolve over time, with the inclusion of new components that increase efficiency Beretta is “ERP”. The concrete commitment towards an eco-sustainable future The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with a nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€1.417,00
Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input: 25 kW Classification European Directive EEC 92/42: **** Quantity of hot water with Δt=25°C: 14 l/min Dimensions (hxlxp) mm 780 x 400 x 336 METHANE power supply Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control) Exclusive services: Mynute Sinthesi - ErP Mynute Sinthesi by Beretta is a wall-mounted condensing boiler for high temperature single-family systems. Continuous electronic modulation of the gas antifreeze device as standard (up to 0°C). Environmental Self-Regulation System (SARA). Mynute Sinthesi keeps all the peculiarities of the Mynute range unchanged but evolves towards new needs. The boiler is equipped with a heat recovery unit on the fumes and combustion in a sealed chamber; this makes it possible to obtain very high performance in terms of efficiency and therefore significant energy savings. Mynute Sinthesi therefore represents the ideal solution both in the first installation and in the replacement. Characteristics: ErP boilers with 6 m low consumption circulator (EEI≤0.20) Specific for high temperature systems Condensing post exchanger in aluminum alloy IPX5D electrical protection degree Environmental Self-Regulation System (SARA) Hydraulic connections cover (optional) Template, plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres Beretta is “ERP”. The concrete commitment towards an eco-sustainable future The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.
€927,00
Beretta EXCLUSIVE GREEN E 25 CSI condensing boiler complete with flue kit cod. 20104060 Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 20 kW Heating nominal heat output: 21.44 kW Classification European Directive EEC 92/42: ★ ★ ★ ★ Sanitary comfort ★ ★ ★ (EN 13203) NOx emission class: 5 (UNI EN 677) Efficiency at rated power: 98.7% Efficiency at reduced load (30%): 109.6% Total electric power: 93W Electrical protection degree: iP X5D Expansion tank capacity: 9 lt Quantity of hot water with Δt=25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min Sanitary water temperature selection range: 35 - 60°C Dimensions (hxlxp) mm 845x453x358 ; 44kg METHANE power supply Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionization control). EXCLUSIVE GREEN E HI-EFFICIENCY ECOLOGICAL CONDENSING WALL-MOUNTS The new Exclusive Green E condensing boilers , equipped with the innovative Beretta front exchanger, in addition to implementing the requests of the ErP standards, improve all the peculiarities confirming themselves as top of the range. Seasonal efficiency up to 94%, very wide modulation range (up to 1:10), low consumption modulating circulator with the possibility of increasing the head up to 7m and reduced consumption are some of the main features. The new Exclusive Green E boilers also offer excellent reliability and technology and, thanks to their high performance, are an excellent solution in hybrid systems with solar thermal and heat pumps. The external probe that allows you to activate the climatic thermoregulation is standard as standard. Furthermore, by adding the optional BeSMART WiFi Comfort Control kit and the LINK MODE interface board kit, Exclusive Green E constitutes a class A+ system and home comfort can be governed by remotely via APP for smartphones and tablets. The boilers are equipped with a special high-head fan designed to be able to pipe flues with Ø 60 mm or Ø 50 mm flues. Front access condensing heat exchanger ( New ! ) The Exclusive Green E boiler is equipped with the new Beretta condensing exchanger with front access . An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. Modulation 1:10 The range offers a wide range of modulation to respond to real energy needs, while simultaneously offering a high reduction in consumption. Beretta realizes this system through a totally pneumatic and therefore safe and reliable model. The electronics in fact act only on the number of fan revolutions (inlet air flow rate) without intervening on the injection of the gas quantity which is automatically sucked in. Beretta therefore introduces a new double distribution mixer: a mechanical damper with a calibrated weight which opens or closes a part of the section of the venturi so as to divide the modulation range into two stages (smaller section with low air flow rates or larger section with high air flow rates). Beretta has also developed a specific silencer in the air intake to reduce any resonances generated by the new mixer. Up to 19 m of ducting with Exclusive Green E 25 With Exclusive Green E it is possible to duct even the most "difficult" flues with ease thanks to the approval for Ø 50mm flues which is added to the traditional Ø 80 mm and Ø 60 mm ducting flues. The main 50mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power. Flex modulating circulator, optimized performance, low consumption ( New ! ) Exclusive Green E uses a low energy consumption synchronous modulating circulator with an Energy Efficiency Index of less than 0.20, which means significantly reduced electricity consumption. The new circulator is set as standard to modulate proportionally to the power supplied by the boiler, thus contributing to a further reduction in electricity consumption. Alternatively, it can modulate with a constant ΔT logic in order to maximize the phenomenon of condensation in the exchanger. If necessary on the heating system, it is also possible to modify the maximum head which is normally set on the 6 m curve, opting for the 4 m, 5 m or 6 m curve without having to replace the circulator, from this characteristic comes the name "Flex". Smart management The control panel is the boiler management device. Simple and intuitive, it allows you to adjust the parameters and activate the numerous functions. A large liquid crystal display shows all important information. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The simple pressure of a key allows you to choose the season and, when the boiler asks for it, the Easy Filling function is activated by pressing a key. The panel integrates the Clima Facile function: thermoregulation and external probe as standard. Compatible with BE Smart ( New ! ) The BeSMART WiFi Comfort Control Panel, optional compatible with Exclusive Green E, is the remote boiler management device with modulating chronothermostat functions. With the WiFi Box accessory, included in the BeSMART WiFi Comfort Control, it is also possible to manage comfort remotely using Smartphones and Tablets. The BeSMART WiFi control is very simple to install and intuitive to use and allows you to adjust the parameters and activate the many functions on the boiler. A large liquid crystal display shows all important information. Using the buttons on the control, the temperature of the heating water and domestic hot water is set easily and intuitively and the heating time programming is carried out. Exclusive Green E and the optional BeSMART WiFi Comfort Control Kits and LINK MODE interface card form a class A+ system. Characteristics: Exclusive Green E* with the BeSMART WiFi Comfort Control (optional) or with the REC 07 Remote Control (optional) forms a class A+ system Compatible with the BeSMART WiFi Comfort Control for remote control via iOS or Android APP from Smartphone or Tablet Very high modulation (up to 1:10) New high-flow aluminum condensing exchanger with front access Low polluting emissions: class 5 (UNI EN 483) Low consumption modulating circulator (EEI≤0.20) 6 m head adjustable up to 7 m Thermoregulation with standard external probe Standard hydraulic fitting cover Possibility of intubating flues with the special flue in PP ø 60 (up to 23m) and ø 50 (up to 19m)** Template, plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres *except model 35E **model 25E Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€1.624,00
Technical features: Heating energy efficiency Class A; Sanitary energy efficiency profile XL Class A; Nominal heat input 25 kW; Nominal thermal power 6 kW; Power: 125W; Expansion capacity: 8 l; Quantity of hot water with Δt=25°C: 14 l/min; flow rate sanitary water: 2 l/min; Sanitary water temperature: 35 - 60°C; Power supply: Methane NOx class 5; Max temperature pressure /°C3/90 bar; Pressure (min./max.): -/8 bar; Boiler capacity: 45 l; Pump: from max system to flow rate mbar /lt/h 375 / 1000; Smoke exhaust kit; General characteristics Effective and Safe The boiler is made up of control systems for the presence of the flame, the correct emission of fumes, temperatures and pressures. It is also equipped with a circulator and a three-way valve with anti-blocking cycles which guarantee correct operation. The boiler allows climatic regulation, which can be activated via the external probe set up for connection to the Beretta remote control panel (optional) which allows you to easily check and check the status of the appliance. High technology Mynute Boiler Green, thanks to the stainless steel kettle, is able to dispense a lot of hot water. The accumulation is equipped with a magnesium anode to offer protection against stray currents and, thanks to the wide flange, the boiler is easily inspectable. To reduce gas consumption, protective insulation is used which prevents the water from cooling down, minimizing the need to ignite the burner to bring the storage back up to temperature. Mynute Boiler Green also offers a standard DHW expansion vessel and is equipped with a predisposition for DHW recirculation (via optional kit). Thanks to the display on the dashboard, information on the status of the appliance is immediately available. Filling the system is easy to do through the appropriate tap. The new Mynute Boiler Green is equipped with a simple control panel. Composed Two knobs that allow you to select all the functions necessary for using the boiler. The heating knob also allows activation of the Amico Climate System. FRIENDLY CLIMATE system: And the function that manages according to the external climatic situation, regulates the temperature inside the house, in fact it is active only when the delivery temperature in heating mode is set between 55 and 65 °C, in fact it automatically increases by 5 ° C every 20 minutes if heat is required. Dimensions (HxWxD): 950x600x450mm; 61kg
€1.940,00
NB: PRODUCT DISCONTINUED --> THE NEW MODEL EXCLUSIVE GREEN E 25 WILL BE SHIPPED Beretta EXCLUSIVE GREEN HE 25 boiler Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 20 kW Heating nominal heat output: 21.44 kW Classification European Directive EEC 92/42: ★ ★ ★ ★ Sanitary comfort ★ ★ ★ (EN 13203) NOx emission class: 5 (UNI EN 677) Efficiency at rated power: 98.7% Efficiency at reduced load (30%): 109.6% Total electric power: 93W Electrical protection degree: iP X5D Expansion tank capacity: 9 lt Quantity of hot water with Δt=25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min Sanitary water temperature selection range: 35 - 60°C Dimensions (hxlxp) mm 845x453x358 ; 44kg METHANE power supply Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control). EXCLUSIVE GREEN HE HI-EFFICIENCY ECOLOGICAL CONDENSING WALL-MOUNTS The new Exclusive Green E condensing boilers, equipped with the innovative Beretta front exchanger, in addition to implementing the requests of the ErP standards, improve all the peculiarities confirming themselves as top of the range. Seasonal efficiency up to 94%, very wide modulation range (up to 1:10), low consumption modulating circulator with the possibility of increasing the head up to 7m and reduced consumption are some of the main features. The new Exclusive Green E boilers also offer excellent reliability and technology and, thanks to their high performance, are an excellent solution in hybrid systems with solar thermal and heat pumps. The external probe that allows you to activate the climatic thermoregulation is standard as standard. Furthermore, by adding the optional BeSMART WiFi Comfort Control kit and the LINK MODE interface board kit, Exclusive Green E constitutes a class A+ system and home comfort can be governed by remotely via APP for smartphones and tablets. The boilers are equipped with a special high-head fan designed to be able to pipe flues with Ø 60 mm or Ø 50 mm flues. Front access condensing heat exchanger ( New ! ) The Exclusive Green E boiler is equipped with the new Beretta condensing exchanger with front access. An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. Modulation 1:10 The range offers a wide range of modulation to respond to real energy needs, while simultaneously offering a high reduction in consumption. Beretta realizes this system through a totally pneumatic and therefore safe and reliable model. The electronics in fact act only on the number of fan revolutions (inlet air flow rate) without intervening on the injection of the gas quantity which is automatically sucked in. Beretta therefore introduces a new double distribution mixer: a mechanical damper with a calibrated weight which opens or closes a part of the section of the venturi so as to divide the modulation range into two stages (smaller section with low air flow rates or larger section with high air flow rates). Beretta has also developed a specific silencer in the air intake to reduce any resonances generated by the new mixer. Warranty All products for sale on our site are new and packed. The guarantee yes
€1.495,00
NB: FOR THE OPERATION OF THE LPG BOILER IT IS NECESSARY TO CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Beretta MYNUTE E 25C Low NOx condensing boiler complete with Methane or LPG fume exhaust kit - NEW Boiler code 20164601 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A NOx emission class 6 XL Load Profile Technical features Heating thermal capacity (max-min) kW 25.00-5.00 Nominal DHW heat input (max-min) kW 25.00-5.00 Expansion vessel capacity on membrane l8 DHW production at ΔT= 25°C / 30°C / 35°C l/min 14.3/11.9/10.2 Supply voltage V-Hz 230 - 50 IP X5D degree of protection DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 29 kgs MYNUTE E BERETTA PRESENTS MYNUTE E, THE NEW CONDENSING BOILER WHICH, COMBINING RELIABILITY AND COMFORT WITH INSTALLATION FLEXIBILITY, IS THE IDEAL CHOICE FOR REPLACING The new MYNUTE E range is divided into three models combined in 25 kW and 32 kW power, one of which is a 25 kW DIN version, to also allow the replacement of boilers with hydraulic standards other than Beretta. The linear and modern design, in line with the recent generation Beretta boilers, the compactness of the dimensions and the installation flexibility make MYNUTE E easy to integrate into any living environment, both inside homes and outdoors (in partially protected places) or built-in, using dedicated accessories. The good efficiency, which places the range in class A, the ease of use and maintenance, and the excellent comfort, both in heating and DHW, complete the profile of this product, which will be appreciated for its reliability and functionality, in perfect harmony with the MYNUTE Beretta tradition. MYNUTE E, RELIABILITY AND FLEXIBILITY FOR A WORRY-FREE REPLACEMENT FEATURES Aluminum condensing exchanger Modulation range 1:5 Low consumption modulating circulator (EEI ≤ 0.20), 6 m Low NOx emissions: CLASS 6 (UNI EN 15502) Availability of 25kw model also with sequence of DIN type hydraulic connections, ideal for replacing products with the same type of connections Installation flexibility: indoor, outdoor and recessed installation (in a partially protected place) The 25C and 25C DIN models are C10 approved. Smoke clapet (non-return valve) available as an accessory Click-fit flue connection: fast and safe, without the need for an external collar Antifreeze heater kit, hydraulic connections and external probe available as accessories IPX5D electrical protection degree “DOUBLE T” template supplied Compatible with hybrid connects for managing up to two system zones Compatible with air-propane gas (25C and 25C DIN models) and with LPG, through optional kits. For gas conversion, contact authorized Beretta Technical Assistance Centres Compatible with BeSmart WiFi comfort control as thermostat (OTBus communication), allowing the most advanced functions Possibility of intubating flues with the special flue in PP ø50, ø60 and ø80 Polyphosphate dosing filter and compact magnetic filter available as accessories Hybrid Ready: Mynute E can be integrated into Beretta multi-energy systems through the Rec 10H Hybrid and the Connect Hybrids, available as accessories CONNECTIVITY WITH BeSMART (wi-fi optional) MYNUTE E is equipped with a control panel that stands out for its ease of use. Through a modern backlit LCD display, which communicates with the user through icons and scrolling texts (multilingual), it is possible to access the MYNUTE E functions. Through 7 silk-screened operating keys, it is possible to navigate the panel in a simple and intuitive way, accessing to the settings and parameterizations of the boiler and the system. MYNUTE E FUNCTIONS MANAGEMENT OF UP TO 2 HYDRAULIC CIRCUITS HIGH AND/OR LOW TEMPERATURE, THROUGH SPECIFIC ACCESSORIES PREHEAT PREHEATING ACTIVATION TO REDUCE DOMESTIC HOT WATER WAITING TIMES Product Warranty The warranty on this item is 24 months from the date of purchase.
€927,00
BERETTA CIAO AT 25 CSI CONDENSING BOILER COMPLETE WITH LPG FUME EXHAUST KIT - NEW ErP Product code: 20113788 Characteristics: Energy efficiency in heating: B Energy efficiency Sanitary: A Sanitary load profile: XL Nominal heat input: 25 kW Electric Power: 129W Supply voltage/frequency: 230/50 Volt/Hz Electrical protection degree: X5D ip Dimensions HxWxD: 780 x 400 x 338 ; 40 Kg Gas version available: METHANE Warm-up exercise: Maximum pressure and temperatures: 3/90 bar/°C Heating temperature selection range: 40/80 °C Pump: pump head available for the system: 266 m/bar Expansion tank capacity: 8 l Healthcare exercise: Maximum pressure: 6 bars Minimum pressure: 0.15 bar Quantity of hot water with ∆t=25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min DHW temperature selection range: 37 - 60 °C NB. THE BOILER WILL BE SUPPLIED WITH METHANE, THE ADJUSTMENT NECESSARY FOR LPG OPERATION WILL BE CARRIED OUT FREE OF CHARGE BY THE BERETTA ASSISTANCE CENTER DURING THE FIRST IGNITION. Beretta HELLO AT Hi AT, ideal for replacement in systems with radiators. Ciao AT is the innovative condensing boiler specifically designed by Beretta for traditional high temperature systems (radiators and radiators). The boiler is equipped with a heat recovery unit on the fumes and combustion in a sealed chamber; this allows to obtain very high performance in terms of efficiency and therefore a significant energy saving. High performance and low consumption In the Ciao AT boiler, the water in the primary circuit passes through an additional exchanger, which allows you to recover energy that would otherwise be wasted. This process makes it possible to recover latent heat and therefore to further increase the performance of the boiler. The energy saving offered by a boiler is greater the higher its efficiency: Ciao AT therefore allows you to reduce gas consumption compared to a boiler without an additional exchanger. Management: The electronic panel is the interface for managing the boiler. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. The liquid crystal display provides information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function. The Ciao AT technology makes use of the condensing exchanger which recovers the latent heat of the fumes, the same principle used by condensing boilers. The exchanger, located at the top left, is connected directly to the fan which pushes the fumes inside it, before they are definitively expelled. The difference in the temperature of the fumes between the ~140°C inlet and the ~65°C outlet of the condensing exchanger is indicative of the amount of heat recovered from them. The return from the system first passes through the condensing exchanger which recovers the heat from the fumes, and then passes through the primary exchanger, where it receives the remaining heat in order to reach the required flow temperature. The water then recovers part of the heat from the fumes, which would otherwise be expelled into the atmosphere, thus giving rise to less waste and consequently greater savings for the user. Outdoor installation: Ciao AT is designed to also be installed outdoors in partially protected places thanks to the dedicated accessories (bottom cover kit and top cover kit) and board anti-freeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit with which the lower cover is required. Up to 17 meters of Ø 60 ducting with the Ciao AT boiler: With Ciao AT it is possible to comfortably duct even the most "difficult" flues thanks to the approval for Ø 60mm flue systems which is added to the traditional Ø 80 mm ducting flue system. The main 60mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power. TECHNICAL FEATURES: Specific for systems with radiators and radiators (at high temperature) Condensing post exchanger in aluminum alloy Possibility of outdoor installation with antifreeze heater kit (optional) IPX5D electrical protection degree Environmental Self-Regulation System (SARA) Low consumption circulator 6 m (EEI≤0.20) Hydraulic connections cover (optional) Condensate collection neutralizer drawer kit (optional) Template, hydraulic fittings, gas and sanitary taps (optional) For gas conversion, contact authorized Beretta Technical Assistance Centres Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€711,00
You have seen 24 out of 36 products
