GAS BOILER BERETTA MYNUTE S 28 CAI LPG OPEN CHAMBER - NEW ErP Technical features Product code: 20102088 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Heating/DHW nominal heat output: 28 kW Quantity of hot water with Δt=25°C: 16 l/min Dimensions (hxwxd) mm 740 x 452 x 336 METHANE power supply Legend: C (heating + sanitary water), A (Open Room) I (electronic ignition, ionization control). MYNUTE S - ErP The benchmark for standard wall mounted boilers. The innovation: Designed to facilitate replacement The new Mynute S, a point of reference in the range of Beretta Clima standard wall-mounted boilers, is specifically designed to make installation particularly easy, especially when replacing with other products. The models in the Mynute S range comply with Legislative Decree 311/06. The reliable: Technology at the service of quality The new Mynute S offers highly reliable combustion and electronics and boasts the high degree of electrical protection IPX5D. The range is therefore characterized by safety and solidity thanks to the components with which it is made which belong to a high quality standard. The boiler features the most innovative safety devices: control systems that monitor the presence of the flame, on the correct evacuation of fumes, on temperatures and pressures. The anti-blocking cycles of the circulator and the board anti-freeze system allow the appliance to last longer over time. The new Mynute S also boasts the Survivor Function which allows it to continue to function in the event of a failure of the sanitary NTC probe. The elegant: A modern style that integrates with any environment The new Mynute S is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to perform all the functions necessary for using the boiler. Characteristics: CAI boilers, ErP version, equipped with low consumption circulator (EEI20) Specifically designed to facilitate the replacement of pre-existing wall-mounted boilers 9 liter expansion vessel Simple and intuitive digital display Arrangement for climatic thermoregulation (optional external probe) Can be interfaced with the REC 08 Remote Control Panel (optional) IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps (optional) For gas conversion, contact authorized Beretta Technical Assistance Centres Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER BERETTA MYNUTE S 28 CAI LPG OPEN CHAMBER - NEW ErP Technical features Product code: 20102088 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Heating/DHW nominal heat output: 28 kW Quantity of hot water with Δt=25°C: 16 l/min Dimensions (hxwxd) mm 740 x 452 x 336 METHANE power supply Legend: C (heating + sanitary water), A (Open Room) I (electronic ignition, ionization control). MYNUTE S - ErP The benchmark for standard wall mounted boilers. The innovation: Designed to facilitate replacement The new Mynute S, a point of reference in the range of Beretta Clima standard wall-mounted boilers, is specifically designed to make installation particularly easy, especially when replacing with other products. The models in the Mynute S range comply with Legislative Decree 311/06. The reliable: Technology at the service of quality The new Mynute S offers highly reliable combustion and electronics and boasts the high degree of electrical protection IPX5D. The range is therefore characterized by safety and solidity thanks to the components with which it is made which belong to a high quality standard. The boiler features the most innovative safety devices: control systems that monitor the presence of the flame, on the correct evacuation of fumes, on temperatures and pressures. The anti-blocking cycles of the circulator and the board anti-freeze system allow the appliance to last longer over time. The new Mynute S also boasts the Survivor Function which allows it to continue to function in the event of failure of the sanitary NTC probe. The elegant: A modern style that integrates with any environment The new Mynute S is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to perform all the functions necessary for using the boiler. Characteristics: CAI boilers, ErP version, equipped with low consumption circulator (EEI20) Specifically designed to facilitate the replacement of pre-existing wall-mounted boilers 9 liter expansion vessel Simple and intuitive digital display Arrangement for climatic thermoregulation (optional external probe) Can be interfaced with the REC 08 Remote Control Panel (optional) IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps (optional) For gas conversion, contact authorized Beretta Technical Assistance Centres Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

BERETTA METEO 28 CAI AG METHANE BOILER - NEW ErP 2015 Cod. 20101259, OPEN ROOM WITH NATURAL DRAFT: CAI boilers specific for outdoor use, ErP version, equipped with low consumption circulator (EEI0,20). Technical specifications Product code: 20101259 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitaryware energy efficiencyprofilXL Class B Characteristics of heating/sanitary exercises: Heating/DHW nominal heat output: 28 kW Quantity of hot water with t=25øC: 16 l/min Dimensions (hxwxd) mmÿ760 x 553ÿx 240 METHANE power supply Legend:ÿ C (heating + sanitary water),ÿ A (Open Room) I (electronic ignition, controls ionization). AGÿAntifreeze fine series -15øC Features list ErP WEATHER ÿMeteoÿ is a complete range of specific boilers for outdoor use. The high technological contents enhance the specific characteristics to the maximum: dimensions, standard remote control panel, resistance to external agents, innovative performance. The quality of the materials and the innovative design of the shell add elegance to these extremely small and high performance boilers. Extremely reliable and simple to use, the boilers in the Metesonnate range are specifically designed for outdoor installations. The exclusive shell structure, the IPX4D electrical protection and the materials used for the coat provide maximum protection from external agents. The streamlined, modern aesthetic allows water to roll off. Installation is facilitated by reduced dimensions and supplied equipment. Designed for installations on balconies, Meteo, with a depth of only 24 cm, is the ideal answer to space problems; equipped as standard with fittings for connection to the system, gas taps and sanitary fixtures with positioning template. The remote control panel, supplied as standard, allows total control of the boiler from inside the home. The main functions are simple and immediate, with many other settingsÿcustomizable by the user. The remote control panel also functions as a chronothermostat weekly and prearranged for climate control via an external probe (optional). Characteristics: CAI boilers, ErP version, equipped with low consumption circulator (EEI0,20)ÿadjustable up to 7m headÿ MIX combustion (Air/Gas): constant performance (mod. CSI)ÿ Built with specific materials for outdoor useÿ Remote control panel REC 05ÿ as standard Exhaust adapter ÷ 60 with standard air intake (mod. CSI)ÿ Standard antigelfine -15øCÿ Electrical protection degrees IPX4Dÿ Arrangement for climatic thermoregulationÿ Plumbing fittings, gas taps and sanitary fittingsÿ For gas conversion, contact authorized Beretta Technical Assistance Centres Beretta or ERP. The concrete commitment to a sustainable future The acronym ÿErP, acronym of Energy related Products?ÿ (Products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015, the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective. The regulation provides that all products intended for heating and the production of domestic hot water with a lower rated thermal power equal to 70 kW can be placed on the market with an ÿenergy labelÿthat highlights theÿefficiency class*. Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility of identifying it facilitates the level of efficiency of a product by being able to carry out a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data reported for climatic bands. In addition to the product labels, the European regulation has provided for the creation of a "system label" in the case of manufacturing plants with various appliances, components and related controls. This second type of labelling, thanks to the virtuous synergy between the various elements, will make it possible to create systems capable of achieving levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to less than 400kW, will prevent inefficient products from being placed on the market. Also for DHW tanks there will be an obligation to respect minimum heat loss limits. For primary water tanks, these will be subject to compliance with an energy classification based on heat loss. For sanitary accumulations, up to 500 liters there will be the obligation of labelling, from 500 to 2000 liters they will be bound to respect the energy classification. For heat pumps for heating and for mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. In order to be placed on the market, gas-fired water heaters with solar heat pumps, in addition to energy labelling, will also have to comply with a series of requirements in terms of efficiency. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Wall mounted boiler Beretta open chamber MYNUTE 28 CAI LX METHANE code 20151436 low NOx Mynute S 28 CAI Product Typology: OPEN CHAMBER WALL BOILER Typology: Mural Use: Heating/Sanitary Boiler installation: Internal Accumulator (boiler): Instantaneous Heating nominal maximum useful power (kw): 28.80 Simple and intuitive digital display. Technical features: New boilers with low NOx emissions Low consumption circulator (EEI?0.20) as standard Specifically designed to facilitate the replacement of pre-existing wall-mounted boilers 9 liter expansion vessel Simple and intuitive digital display Predisposition for climatic thermoregulation (optional external probe)Predisposition for connection to the BeSMART Comfort control (code 20143539) IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps (optional) The ecological burner To reach high standards Mynute Low NOx is equipped with a special atmospheric burner, cooled and equipped with nozzles in number superior, which allows the specification premixing of gas and air. In this how combustion occurs a temperatures lower than usual in a traditional burner. The burner consists of a surface on the which develops the high flame few millimeters, also called "microflame". The tube that passes through the burner with the return water from the system heating promotes cooling of the burner surface. Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THIS PRODUCT IS MADE TO ORDER. WILL BE SHIPPED WITHIN 10 DAYS OF PURCHASE DATE Cadaia Beretta Open Chamber Meteo 24 cai LX Low NOx with Standard BeSmart cod. 20152461 Methane - New Heating/sanitary nominal heat input Kw 26.7 Heating/DHW nominal heat output kW 24.06 Heating reduced heat input kW 10.7 Heating reduced thermal power kW 9.33 DHW reduced heat input kW 9 DHW reduced thermal power kW 7.85 Useful efficiency Pn max - Pn min (80°-60°) % 90.1 - 87.2 Profitability 30% (50th return) % 89.5 Combustion efficiency % 91.6 Total electric power W 87 Circulator electric power (1,000 l/h) W 39 Category II2H3P Destination country IT Supply voltage V - Hz 230 - 50 IP X5D degree of protection Chimney losses with burner off - on % 0.37 - 8.40 Warm-up exercise Maximum pressure bar 3 Minimum pressure for operation 0.25 - 0.45 bar Maximum temperature 90 °C Heating water temperature selection range °C 40 - 80 Membrane expansion vessel l 8 Expansion vessel preload bar 1 Sanitary exercise Maximum pressure 6 bar Minimum pressure bar 0.15 Quantity of hot water at ?t 25° C l/min 13.8 Minimum domestic water flow rate l/min 2 Domestic hot water temperature selection range °C 37 - 60 Flow regulator l/min 10 Gas pressure Natural gas nominal pressure (G20) mbar 20 LPG (G31) liquid gas nominal pressure mbar 37 Hydraulic connections Heating inlet - outlet Ø 3/4” DHW inlet - outlet Ø 1/2” Gas inlet Ø 3/4” Boiler dimensions Height mm 760 Height with coverage 886 Width 494mm Depth 243mm Weight kg 34 LX WEATHER New boilers with Low NOx emissions Low consumption circulator (EEI≤0.20) modifiable up to 7 m head Built with specific materials for outdoor use BeSMART remote control panel as standard Standard antifreeze up to -15 °C IPX4D electrical protection degree Arrangement for climatic thermoregulation Plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS NEW AND WORKING BUT IT HAS A SIDE DENT, A SMALL DAMAGE NEAR THE DISPLAY AND THE PACKAGING IS WORN. (FOR MORE INFORMATION SEE PHOTO NEXT TO THE MAIN IMAGE) Open Chamber Boiler Beretta CIAO LX 24 CAI Low NOx Methane 20151648 - NEW Technical Features Model: CIAO LX 24 CAI Code: 20151648 Nominal heating/sanitary thermal capacity: 26.70 kW Nominal heating/sanitary thermal power: 24.06 kW Efficiency at rated power: 90.1 Efficiency at reduced load (30%): 89.2% NOx class 6 Maximum operating pressure heating bar 3 Maximum absorbed electrical power W 47 Quantity of hot water deltaT 25C° 13.8 l/min Dimensions HxWxD 740x400x340 HELLO LX Beretta has renewed the Ciao open chamber boiler; the previous Ciao S CAI model now becomes Ciao LX CAI and is in NOX Class 6. Aesthetically it looks like the previous one but its technology is now completely different. The Ciao LX CAI is the entry-level model for approaching Beretta boiler technology; the CAI model has an open combustion chamber and natural draft. The adjectives that identify it are: high quality standard, robustness, reliability and economy in purchase and operation. The innovative Double Exchanger is very compact and is of the plate type with the possibility of pre-heating . It also uses a low consumption Synchronous Circulator (EEI = 0.20) with anti-blocking cycle system and 3-way valve; it is equipped with a smoke control thermostat and by-pass on the heating circuit. Beretta Ciao has a simple, modern and elegant line; the front panel, the real brain of the boiler, is equipped with many functions. Ciao LX CAI is designed to be installed outdoors in partially protected places, thanks to the dedicated accessories and the anti-freeze protection on the board up to 0 °C. In colder temperature conditions, it is possible to extend the protection up to -10 °C using the specific anti-freeze resistance kit together with the siphon anti-freeze resistance kit (optional, to be requested separately from the Beretta Technical Assistance Centre). A convenient digital liquid crystal display for viewing the temperature and diagnostic codes, the on/off/summer/winter/reset/heating temperature/ Amico Climate System activation selector, the domestic hot water temperature/pre-heating activation selector, the Hydrometer. The wall-mounted hydraulic fittings, the sanitary taps and the gas tap are not included in the package. GUARANTEED SAVINGS AND HIGH COMFORT Gas consumption is always very low . This new version complies with the new standards on exhaust gas emissions (NOx 6) and the ErP Directive 2015 ; the boiler benefits from Energy Classes C in Heating and B in Sanitary . Everything is born in the name of savings, starting from the purchase price up to the management of consumption. Maximum comfort with minimum expense. TECHNICAL FEATURES Class B/C NOx class 6 - ErP version, equipped with 6 m low consumption circulator Double exchanger: primary and sanitary plate with pre-heating option 8 litre expansion vessel Provision for climate control (optional external probe to be purchased through CAT) Electrical protection degree IPX5D Hydraulic fittings, gas taps and optional sanitary fittings 3-way valve with anti-lock cycle system Smoke control thermostat By-pass on the heating circuit Electronic board with self-diagnostic function and anti-freeze protection Simple and intuitive digital display On/off/summer/winter/reset/heating temperature/Climate Friend System activation selector Domestic hot water temperature selector/preheating activation Hydrometer Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA UN DANNEGGIAMENTO AL DISPLAY, BOZZATURA LATERALE E L'IMBALLAGGIO È USURATO (PER MAGGIORI INFORMAZIONI SUI DANNEGGIAMENTI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). Caldaia Camera Aperta Beretta CIAO LX 24 CAI Low NOx Metano Caratteristiche Tecniche Modello: CIAO LX 24 CAI Codice: 20151648 Portata termica nominale riscaldamento/sanitario: 26.70 kW Potenza termica nominale riscaldamento/sanitario: 24.06 kW Rendimento alla potenza nominale: 90.1 Rendimento a carico ridotto (30%): 89.2% Classe NOx 6 Pressione massima di esercizio riscaldamento bar 3 Potenza elettrica assorbita massima W 47 Quantità di acqua calda deltaT 25C° 13.8 l/min Dimensioni AxLxP 740x400x340 CIAO LX Beretta ha rinnovato la caldaia Ciao a camera aperta; il precedente modello Ciao S C.A.I. diventa ora Ciao LX C.A.I. e si pone in Classe NOX 6. Esteticamente si presenta come la precedente ma la sua tecnologia ora è tutta diversa. La Ciao LX C.A.I.  è il modello d’ingresso per avvicinarsi alla tecnologia delle caldaie Beretta; il modello C.A.I. è a camera aperta e tiraggio naturale. Gli aggettivi che la identificano sono: elevato standard qualitativo, robustezza, affidabilità ed economia nell’acquisto e nell’esercizio. L´innovativo Doppio Scambiatore è molto compatto ed è del tipo a piastre con possibilità di preriscaldo. Utilizza inoltre un Circolatore Sincrono a basso consumo (EEI=0,20) con sistema cicli antibloccaggio e valvola a 3 vie; è dotata di Termostato di controllo fumi e By-pass sul circuito riscaldamento. Beretta Ciao ha una linea semplice, moderna ed elegante; il pannello frontale, vero cervello della caldaia, è dotato di molte funzioni. Ciao LX C.A.I. è progettata per poter essere installata all´esterno in luoghi parzialmente protetti, grazie agli accessori dedicati e alla protezione antigelo di scheda fino a 0 °C. In condizioni di temperature più fredde è possibile estendere la protezione fino a -10 °C utilizzando l´apposito kit resistenze antigelo unitamente al kit resistenza antigelo sifone (optional da richiedere separatamente al Centro Assistenza Tecnica Beretta). Un comodo display digitale a cristalli liquidi per la visualizzazione della temperatura e dei codici di diagnostica, il Selettore on/off/estate/inverno/reset/temperatura riscaldamento/attivazione Sistema Clima Amico, il Selettore temperatura acqua calda sanitaria/attivazione preriscaldo, l’Idrometro. I raccordi idraulici a muro, il rubinetti sanitari ed il rubinetto gas non sono compresi nella confezione. RISPARMIO GARANTITO E COMFORT ELEVATO I consumi di gas sono sempre molto bassi. Questa nuova versione rispetta le nuove norme sulle emissioni di gas combusti (NOx 6) e la Direttiva ErP 2015; la caldaia usufruisce delle Classi Energetiche C in Riscaldamento e B in Sanitario. Tutto nasce all’insegna del risparmio, a partire dal prezzo di acquisto fino alla gestione dei consumi. Massimo comfort con la minima spesa. CARATTERISTICHE TECNICHE Classe B/C  Classe NOx 6 - versione ErP, equipaggiata con circolatore basso consumo 6 m Doppio scambiatore: primario e sanitario a piastre con possibilità di preriscaldo Vaso espansione da 8 litri Predisposizione per la termoregolazione climatica (sonda esterna optional da acquistare tramite C.A.T.) Grado di protezione elettrica IPX5D Raccordi idraulici, rubinetti gas e sanitario optional Valvola 3 vie con sistema cicli antibloccaggio Termostato di controllo fumi By-pass sul circuito riscaldamento Scheda elettronica con funzione autodiagnostica e protezione antigelo Display digitale semplice e intuitivo Selettore on/off/estate/inverno/reset/temperatura riscaldamento/attivazione Sistema Clima Amico Selettore temperatura acqua calda sanitaria/attivazione preriscaldo Idrometro Garanzia Prodotto   Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE  IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO: PANNELLO DI COMANDO GRAFFIATO AMMACCATURA SULLA PARTE INFERIORE BOZZATURE SUL LATERALE DESTRO E SULLA PARTE ANTERIORE LEGGERA RIENTRANZA SULLA PARTE POSTERIORE LEGGERA AMMACCATURA SULLA PARTE SUPERIORE IMBALLO USURATO (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). Caldaia Camera Aperta Beretta CIAO LX 24 CAI Low NOx Metano 20151648 Caratteristiche Tecniche Modello: CIAO LX 24 CAI Codice: 20151648 Portata termica nominale riscaldamento/sanitario: 26.70 kW Potenza termica nominale riscaldamento/sanitario: 24.06 kW Rendimento alla potenza nominale: 90.1 Rendimento a carico ridotto (30%): 89.2% Classe NOx 6 Pressione massima di esercizio riscaldamento bar 3 Potenza elettrica assorbita massima W 47 Quantità di acqua calda deltaT 25C° 13.8 l/min Dimensioni AxLxP 740x400x340 CIAO LX Beretta ha rinnovato la caldaia Ciao a camera aperta; il precedente modello Ciao S C.A.I. diventa ora Ciao LX C.A.I. e si pone in Classe NOX 6. Esteticamente si presenta come la precedente ma la sua tecnologia ora è tutta diversa. La Ciao LX C.A.I.  è il modello d’ingresso per avvicinarsi alla tecnologia delle caldaie Beretta; il modello C.A.I. è a camera aperta e tiraggio naturale. Gli aggettivi che la identificano sono: elevato standard qualitativo, robustezza, affidabilità ed economia nell’acquisto e nell’esercizio. L´innovativo Doppio Scambiatore è molto compatto ed è del tipo a piastre con possibilità di preriscaldo. Utilizza inoltre un Circolatore Sincrono a basso consumo (EEI=0,20) con sistema cicli antibloccaggio e valvola a 3 vie; è dotata di Termostato di controllo fumi e By-pass sul circuito riscaldamento. Beretta Ciao ha una linea semplice, moderna ed elegante; il pannello frontale, vero cervello della caldaia, è dotato di molte funzioni. Ciao LX C.A.I. è progettata per poter essere installata all´esterno in luoghi parzialmente protetti, grazie agli accessori dedicati e alla protezione antigelo di scheda fino a 0 °C. In condizioni di temperature più fredde è possibile estendere la protezione fino a -10 °C utilizzando l´apposito kit resistenze antigelo unitamente al kit resistenza antigelo sifone (optional da richiedere separatamente al Centro Assistenza Tecnica Beretta). Un comodo display digitale a cristalli liquidi per la visualizzazione della temperatura e dei codici di diagnostica, il Selettore on/off/estate/inverno/reset/temperatura riscaldamento/attivazione Sistema Clima Amico, il Selettore temperatura acqua calda sanitaria/attivazione preriscaldo, l’Idrometro. I raccordi idraulici a muro, il rubinetti sanitari ed il rubinetto gas non sono compresi nella confezione. RISPARMIO GARANTITO E COMFORT ELEVATO I consumi di gas sono sempre molto bassi. Questa nuova versione rispetta le nuove norme sulle emissioni di gas combusti (NOx 6) e la Direttiva ErP 2015; la caldaia usufruisce delle Classi Energetiche C in Riscaldamento e B in Sanitario. Tutto nasce all’insegna del risparmio, a partire dal prezzo di acquisto fino alla gestione dei consumi. Massimo comfort con la minima spesa. CARATTERISTICHE TECNICHE Classe B/C  Classe NOx 6 - versione ErP, equipaggiata con circolatore basso consumo 6 m Doppio scambiatore: primario e sanitario a piastre con possibilità di preriscaldo Vaso espansione da 8 litri Predisposizione per la termoregolazione climatica (sonda esterna optional da acquistare tramite C.A.T.) Grado di protezione elettrica IPX5D Raccordi idraulici, rubinetti gas e sanitario optional Valvola 3 vie con sistema cicli antibloccaggio Termostato di controllo fumi By-pass sul circuito riscaldamento Scheda elettronica con funzione autodiagnostica e protezione antigelo Display digitale semplice e intuitivo Selettore on/off/estate/inverno/reset/temperatura riscaldamento/attivazione Sistema Clima Amico Selettore temperatura acqua calda sanitaria/attivazione preriscaldo Idrometro Garanzia Prodotto   Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less