Ariston Egis Premium EVO IN 30 EU METHANE condensing boiler COMPLETE WITH FUME KIT - ErP Product code: 3301123 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 29.0/6.0 Max/min heating thermal power (80°C-60°C) kW 30.6/6.5 Efficiency at nominal heat input (60/80°C) % 98.0/88.1 Efficiency at nominal heat input (30/50°C) % 105.6/95.1 Efficiency at 30% at 30°C % 109.4/98.5 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 25/45 Min operating temperature* °C -15 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 13.2 Quantity of hot water ∆T=25°C litres/min 16.3 Quantity of hot water ∆T=35°C litres/min 11.6 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 110 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 1140/590/240 Extremely small dimensions to adapt to any space problem. METHANE power supply Standard: Sensys system manager with integrated time programming EGIS Premium Evo IN Egis Premium Evo In is the wall-mounted condensing boiler expressly designed for built-in installation. Small dimensions and reduced weight, its implementation is extremely simple. This without giving up the safety that distinguishes Ariston, i.e. exceptional resistance to cold (up to -15°C) and electrical protection from water and dust that reaches the highest levels (IPX5D classification). Characteristics: Built-in condensing boiler with auto function and info top Sensys system manager with integrated time programming Continuous modulation high efficiency circulator prepared for integration in system configuration through the new Bus Bridgenet® communication protocol modulation ratio 1:4 Universal built-in unit in electro-galvanized sheet metal (to be ordered with separate code) Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort External probe integrated in the boiler Anti-freeze, anti-limescale and anti-blocking circulator protection Aluminum isothermal primary exchanger Cold water inlet and heating return filters 60mm split exhaust Operation ONLY with METHANE gas Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo EXT thanks also to the high modulation ratio 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION The boiler will be supplied with methane with the nozzle kit included for the LPG transformation. Contact the local authorized assistance center in advance for the conversion to LPG. NB THE PRODUCT IS MADE TO ORDER Technical features Model : S/SGA BF X VT 100 Code : 3211161 Power supply: methane Energy class: B Pickup profile: M Technical data Capacity: 100L Thermal power: 4 kW Useful power: 3.68 kW Heating time (ΔT= 45°C): 54 min. Continuous water at 40°C: 70 l/h Water in the first hour at 40°C: 251 l Natural gas consumption G20: 0.42 m3/h Max working pressure: 8 bar Dimensions and weight Net weight: 52kg Legend A: 1125mm B: 640mm D: 395mm D: 847mm Ariston S/SGA BF X VT water heater Low NOx: Complies with 09/26/2018 Operation without electrical connections Piezo ignition system Enamelled water heater Magnesium anode Operation even at minimum water pressures Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON GENUS PREMIUM NET 35 EU SMART Wi-Fi CONDENSING BOILER COMPLETE WITH LPG FUME KIT - NEW ErP Product code: 3300906 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 31/3.5 Max/min heating thermal power (80°C-60°C) kW 30.1/3.4 Efficiency at nominal heat input (60/80°C) % 97.7 Efficiency at nominal heat input (30/50°C) % 106.5 Efficiency at 30% at 30°C % 108.7 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in sanitary mode (10 min. with ∆T=30°C) litres/min 16.0 Quantity of hot water ∆T=25°C litres/min 19.3 Quantity of hot water ∆T=35°C litres/min 13.8 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 77 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/400/385 Genus Premium NET The top-of-the-range condensing boiler, complete with connectivity service. The Genus Premium NET wall-mounted boiler, in addition to being the maximum expression of the Ariston range, is already ready for use of the connectivity service. Thanks to the condensing technology, by recovering the energy of the exhaust fumes, it generates an increase in the calorific value which makes it possible to eliminate waste (of energy) and to obtain higher thermal efficiency than conventional boilers. Genus Premium Evo offers even greater performance thanks to the innovative technology that allows it to self-regulate according to variations in the external and internal temperature of the room, allowing energy savings of up to 35% compared to an older generation boiler. It is available in the heating and domestic hot water production version in 2 powers: 24-35 kW. Characteristics: Can be installed in partially protected places Large backlit dot matrix screen Continuous modulation high efficiency circulator Modulation ratio 1:10 Acoustic comfort guaranteed by the lower number of boiler on and off cycles, new silencer and sound-absorbing panels Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Isothermal primary heat exchanger in stainless steel Increased sanitary exchanger Cold water inlet and heating return filters 60mm split exhaust + COMFORT: The system manager constantly monitors the room temperature even if you are away from home. No more surprises when you return! + SAVINGS: It is possible to synchronize the temperature in your home with the rhythms of your life, avoiding useless ignitions of the boiler. Lower consumption in the bill, less stress for your system! + RELIABILITY: Your trusted TAC will assist you constantly by monitoring the performance and correct functioning of your system. Serenity will always be by your side THREE SIMPLE STEPS TO GET THE MAXIMUM BENEFITS FROM THE INNOVATIVE PACKAGE 1. RECEIVE THE BOILER COMPLETE WITH THE CONNECTIVITY KIT DIRECTLY AT HOME 2. DOWNLOAD THE FREE APP TO MANAGE THE SYSTEM EVEN AWAY FROM HOME 3. CHOOSE THE TRUSTED CAT FOR CONSTANT ASSISTANCE AND TO ENSURE OPTIMAL PERFORMANCE AT ALL TIMES* Comfort and savings within reach of your smartphone, one more reason to switch to AristonNet! Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the energy certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ariston open chamber boiler BS II 24 CF gpl Power 24 kW Nominal heat input 25.3 kW Dimensions 40x77x31.5 cm Energy efficiency stars (dir 92/42/EEC) *** Performance stars (heating and hot water production) *** Efficiency at nominal heat input 90.7% Efficiency at 30% of the thermal capacity 88.8% LPG power supply NB The boiler will be supplied native to methane and will be supplied with the free transformation kit BS II The brand new BS II 24 CF AUTOMATIC boiler, maximum efficiency and minimum consumption. It is increasingly important to contain consumption, both due to the growing cost of fuel and to help keep the environment as healthy as possible. This is why BS AUTOMATICA was born, the new wall mounted boiler with intelligent technology. In fact, the boiler chooses the optimal operating conditions in constant relationship with the outside, thanks to an innovative technology of sensors and system management. Comfort function to have domestic hot water in 5 seconds, Saving function to obtain 15% reduction in consumption and many other functions make the BS a product of very high technological efficiency, suitable for any type of heating requirement The BS compact wall-mounted boiler is available in the heating and domestic hot water production version in 2 powers: 24 kW (open chamber) and 24 kW (sealed chamber) and is set up for solar system management. It is equipped with a self-diagnosis system, via LED, which simplifies domestic management of the boiler and facilitates intervention by technical assistance in the event of any anomalies. This product is made by the manufacturer in only one version: methane. However, the boiler is approved to operate on LPG as well. By simply replacing the original nozzles, supplied by the parent company, the boiler will work regularly with LPG fuel. EQUIPMENT: Protection against freezing, limescale and circulator blocking. Arrangement for devices for wireless adjustments Cold water inlet and heating return filters. Multifunction led interface. LED self-diagnosis system. Increased expansion vessel. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ARISTON ELECTRIC STORAGE WATER HEATER VELIS EVO 50 EU VLS 50 code 3626145 50 LITERS - NEW Technical features Product code: 3626145 Energy label specifications according to the European ErP directive Energy efficiency: Class B Withdrawal profile: M profile Characteristics of heating/DHW operation: Capacity: 50 litres Installation: Multiposition V/H Power: 1500W Voltage: 230V Heating time (ΔT=45°C): 1.30 Time required for the first shower: 50 min Max working pressure: 8 bar Max operating temperature °C 80 Dimensions mm (LxHxP) 506 x 776 x 275 mm Protection: IPX4 VELIS evo EU With its new features, the new Velis Evo reaches a new level of comfort, smarter and more elegant. Thanks to the ECO EVO function, Velis Evo memorizes when and how much hot water to use, obtaining maximum energy efficiency. Every time Velis EVO finishes heating enough water to guarantee the first hot shower, the "Shower Ready" symbol lights up on the display. Extra slim and installable horizontally and vertically, the Velis Evo adapts to any environment. Characteristics: Elegant and exclusive design Shower ready function and ECO EVO function Energy class B Anti-noise enamelled resistor Multi position installation h/v Enamelled titanium boiler at 850°C Double magnesium anode and double 5 bolt flange Multifunction LCD display ANTI-LEGIONELLA function To ensure maximum safety and hygiene, the new Ariston products with ABS package are equipped with the anti-legionella function which, if this does not happen for 30 consecutive days, heats the stored water up to 65° c. ANTI-FREEZE function If the water heater is connected to the electricity line, the resistance is activated when the accumulated water temperature drops below 5°C. This system avoids possible breakage due to the expansion caused by the freezing of the water inside. SELF-DIAGNOSTICS function In the event of a fault, the water heater displays the type of problem that has occurred on the front panel via LEDs, allowing for faster repairs. ANTY-DRY function This is a protection system designed to ensure that the water heater does not turn on in the event of a lack of water in the boiler, thus avoiding internal overheating and the consequent breakage of internal components. ELECTRICAL SAFETY function ACTIVE At the end of each water heating cycle, the water heater performs a double disconnection from the electricity line, thus guaranteeing complete safety. ANTI-SCALD function In the event of a thermostat malfunction, the water heater shuts down, preventing the water from overheating up to 100°C and protecting the user from any accidental burns. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THIS ITEM WILL BE REPLACED WITH NEXT EVO X 16 LT. COD. 3632433 Technical features Product code: 3632165 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 28 Minimum thermal power kW 5.4 Modulation range 6 - 31.0 Nominal heat input kW 31 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 49 Protection type IPX4D Power supply: METHANE General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Heat pump water heater Ariston Nuos Primo 80 class A code 3623238 accumulation 80 liters Technical features Product code: 3623238 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: COP* 2.32 Heating time* h:min 5:20 Min/max air temperature °C 10/40 Max water temperature heat pump only/with R °C 55/75 Sound power *** dB(A) 54 Average absorbed electrical power W 250 Nominal accumulation capacity l 80 Maximum working pressure bar 8 Maximum absorbed voltage/power V/W 220-240/1550 Resistance power W 1200 Standard air flow m3/h 170 Minimum volume of the installation room** m3 20 Empty weight kg 45 IP24 electrical protection Insulation thickness mm 31 Diameter of water connections " 1/2M Minimum storage room temperature °C 1 Thermal dispersions (Pes)* W 17 Available static pressure Pa 65 Annual energy consumption (average climate)* kWh/year 533 Seasonal yield* % 96 V40 (quantity of water mixed at 40°C)* l 91 New Primo  An advanced efficient and sustainable solution. It uses the heat from the air as a renewable energy source to obtain the greatest comfort and savings. Working range in heat pump with air temperatures from 10 to 40°C Ambient air product Ecological gas R134a allows to reach water temperatures up to 55°C in heat pump Condenser wrapped around the boiler (not immersed in water) Titanium enamelled steel boiler Supplementary electrical resistance Magnesium anti-corrosion anode LED displays Functions: green, boost, auto, hourly programming of withdrawals and anti-legionella Product for internal installation Excellent for a family of 3-5 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Ariston 3318636 Multifunction board Management or piloting of three live zones Differential thermostat (non-standard probes) Thermostat (non-standard probe) Boiler error alarm and remote reset Programmable output in combination with the Sensys

Read more less

Electric water heater Ariston Accumulation Velis Vls Dune wifi 100 Eu 3626296 100 Liters - NEW Technical features Product code: 3626296 Energy label specifications according to the European ErP directive Energy efficiency: Class B Withdrawal profile: M profile Characteristics of heating/DHW operation: Capacity: 100 litres Installation: Multiposition V/H Power: 1500W Voltage: 230V Heating time (ΔT=45°C): 2.50 Time required for the first shower: 50 min Max working pressure: 8 bar Max operating temperature °C 80 Overall dimensions mm 1251x880 Weight 32Kg Protection: IPX4 VELIS DUNE WIFI With the Velis Dune WiFi electric water heater, Ariston takes a step forward towards the future: the best technology of the brand and all the innovations introduced with the Velis EVO model are enriched in this model by wi-fi connectivity . Its compactness, installation versatility combined with the typical Ariston construction quality, make it a leading item in the panorama of electric storage water heaters. It is presented here in the version with 100-litre storage tank. Characteristics: Remotely manageable via the AQUA ARISTON NET App Super thin thickness Elegant and exclusive design Multi-function LCD display Multiposition H/V installation First shower available in half the time ECO EVO function Shower Ready function Anti-legionella function Anti-noise enamelled resistance Double magnesium anode ANTI-LEGIONELLA function To ensure maximum safety and hygiene, the new Ariston products with ABS package are equipped with the anti-legionella function which, if this does not happen for 30 consecutive days, heats the stored water up to 65° c. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS WATER HEATER ARISTON NEXT OUTDOOR 20 EU LPG - new ErP model Technical features Product code: 3632259 Energy label specifications according to the European ErP directive Energy efficiency: Class B Load profile: XL profile Characteristics of heating/DHW operation: CE certification (pin) 0051CM4090 Category II 2H3P Nominal thermal power kW 36.1 Minimum thermal power kW 7.2 Modulation range 1 : 5.0 Nominal heat input kW 40 Min/max temperature selectable 35-70 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow rate l/min > 3.8 Flow rate (ΔT 25°C) l/min 20 Supply voltage (frequency 50 HZ) V 230-50 Maximum absorbed power W 63 Minimum ambient temperature of use °C -20 Electrical protection type IPX5D Dimensions (HxWxD): 582 x 375 x 160 mm Weight: 17.5kg Power supply: LPG or methane Next Outdoor EU The generation of gas water heaters for outdoor use Next Outdoor, the new instantaneous gas water heater for outdoor use. Featuring an exclusive design, small size (only 13cm deep!) and new features. Next outdoor offers maximum temperature stability thanks to the electronic modulation of the gas and the fan, the wide modulation ratio between the maximum and minimum power, and the automatic water flow regulator. With the bathroom function, Next outdoor allows you to have the ideal quantity and temperature for maximum relaxation. Thanks to the introduction of the PROFESSIONAL 20 and 24 l/min models, the Ariston range for the outdoor version is completed, without however renouncing an attractive design and the compactness that distinguishes it on the market. The Next Outdoor, thanks to the remote control, has all the functions at hand and the small size makes it easily adaptable to any type of outdoor environment. Furthermore, thanks to the models of the new PROFESSIONAL range (20 and 24 l/min) it is able to manage up to a maximum of 5 products in cascade. Next Outdoor is the most efficient in its category and can also be integrated with solar systems. Thanks to the kit with thermostatic valve, the NEXT OUTDOOR is set up for integration and management of solar systems. An ecological and clean solution to avoid waste and encourage energy saving. Characteristics: External installation type A3 It does not require a fume exhaust system Standard remote control: with the remote control it is possible to change the temperature from anywhere in the house Electronic ignition (220 v) with ionization flame sensor and consequent gas savings of up to 25% Maximum efficiency > 90% Modulation ratio 1:6 Automatic flow regulator with stepping motor Electronic thermostatic modulation for precise temperature control Minimum activation pressure at 0.1 bar Standard antifreeze function: up to -20° Cascade solution up to 5 products (only with models 20 and 24) Integration with solar thermal via thermostatic valve Small size Absolute safety thanks to the IPX5D electrical protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION: OFFER VALID UNTIL STOCKS LAST! Overview ARISTON FAST EVO B 11 EU METHANE GAS WATER HEATER with battery Cod. 3632215 - new ErP model Open Chamber NATURAL DRAFT Technical specifications Product code: 3632215 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: profileM Characteristics of heating/DHW operation: CE certification (pin) 0063CN7240 Category II 2H3+ Type B11BS Electronic ignition Power supply: 2x1.5V LR20 batteries Chamber Open to natural draught Nominal heat output: 19 kW Minimum thermal power: 8 kW Nominal heat input: 21.5 kW Combustion efficiency (fumes): >89% Min/max temperature selectable: 35-65C Flow rate (T 25C): 11 l/min Minimum operating flow: >2 l/min Dimensions (HxLxP): mm 580 x 310 x 210; 9.6kg Power supply: METHANE Main features Fast EvC/B EU Fast Evo: The new range of instantaneous gas-fired water heaters in the Open Chamber version with high efficiency and reliability standards (11,14 and 16 l/min) Simple, reliable and intuitive Fast EVO Ariston brings the evolution of the Open Chamber gas water heater to every home. High standards of efficiency and great reliability for 2 models with different types of ignition: rechargeable battery and knob for Fast EVO B and power supply cable and LCD display for Fast EVO C. Both versions ensure high performance and considerable savings in terms of consumption. the Fast EVO water heater offers numerous advantages, starting from the continuous flame modulation thanks to the NTC probe located at the exchanger outlet, which guarantees maximum temperature stability. In case of fluctuations in the water flow rate (2 l/min minimum variation threshold), the new Fast EVO, thanks to the NTC probe and the electronic card, manages to keep the temperature stable with better performance compared to the models considered top of the market. Fast EVO also equipped with water flow switch, humid chamber copper exchanger and electronic flame detection; the minimum operating pressure of 0.1 bar allows the product to operate in the most extreme conditions, while the minimum ignition flow rate is 2 l/min. Overtemperature protection makes it safer to use. Advantages: The innovative water heater available in the version with electric power cable and LCD display (FAST EVO C) or with rechargeable battery (FAST EVO B) Intuitive control panel with LCD display (model C) Continuous flame modulation thanks to the NTC probe located at the exchanger outlet (maximum temperature stability Minimum operating pressure 0.1 bar Minimum ignition flow rate 2 l/min Presence of the water flow switch "Humid chamber" copper heat exchanger Electronic detection of flame presence External temperature regulation: Allows the user to choose the temperature that best suits his needs Electronic control: Electronic control panel for easier and more immediate use. High efficiency: Product characterized by high energy performance, reduction of consumption and polluting emissions. Can be integrated with Solar : Suitable solar integration through a thermostatic valve which allows the water heater not to start in the event that the temperature of the water preheated by the solar system is higher than the desired temperature, guaranteeing high energy savings Ecodesign Directive In fact, after very long negotiations, the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing boilers on the market starting from 26 September 2015. This means that starting from this date, anyone wishing to install a boiler in their own home will have to install only condensation. Only a particular type of non-condensing boiler will continue to be produced which is technically called "Open Chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings. What is energy labelling Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies on end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. From 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks ),. How to read energy labels There are different labels, based on the type and function of the product (both space and water heating, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in a system. In this case it is necessary to prepare a system label in addition to that relating to the individual product. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT IT HAS VARIOUS DENTS AND REPAIRS WITH PLASTIC PARTS GLUE (SEE PHOTO) Product code: 3629052 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: Capacity l 80 Power kW 1.2 Average absorbed electrical power kW 0.19 Electric power absorbed max kW 1,42 Voltage V 220-240 i-Memory heating time (ΔT=43°C) h,min 5.25 Boost heating time (ΔT=43°C) h,min 2.34 Green heating time (ΔT=43°C) h,min 9.21 Maximum working pressure 8.0 bar Min/max air temperature °C 12/40 Sound power 49 dB Weight kg 37.5 IP protection X4 Lydos Hybrid 50% Energy Saving Every Day. Lydos Hybrid is the first water heater with hybrid technology in class A which allows you to save 50% of energy compared to one in class B, thanks to the combined use of energy from the heat pump and electricity. Hybrid Intelligence. The innovative i-Memory software learns your habits to efficiently manage hybrid technology, choosing the most convenient option between using energy from the heat pump and electricity. After an initial learning phase, the i-Memory is able to program the water temperature every hour, so as to meet the user's needs while saving time and energy. Superior Performance. Thanks to Hybrid Intelligence and i-Memory, hot water is always available when needed. The BOOST function speeds up the production of hot water and the Shower Ready icon notifies you when the first shower is ready. Simple installation . Designed to be as easy to install as any electric water heater No additional work is required thanks to compatibility with the supports and water connections of standard Ariston electric water heaters The hydraulic connections are completely hidden inside the product itself Italian style and intuitive design thanks to the advanced hi-tech interface.  Functions: i-MEMORY: Chooses the best compromise between comfort and efficiency based on user habits. The temperature and the amount of hot water are set on the basis of the energy consumption in the last four weeks. Managing the operation of the heating element and the heat pump is therefore an improvement process. Green Achieves maximum efficiency using 100% of the heat pump. The maximum temperature that can be reached is 53°C and cannot be increased. The electric resistance is activated only with Anti-legionella, or in the event of a malfunction of the heat pump. boost Temporarily increases the electric power of the product, in case of need for hot water within a short time. The resistance and the heat pump work together up to 53°C, after which the temperature is regulated only by the resistance. When the desired temperature is reached, the Boost function deactivates. Program Desired time and temperature program to optimize consumption thanks to hybrid technology. Allows the user to choose two different temperatures at two different times. Operation is in heat pump or, if necessary, in resistance. Lydos Hybrid At a Glance: First electric water heater with class A hybrid technology 50% savings compared to a class B water heater i-Memory, Program, Green and Boost function Active anode + magnesium Enamelled resistance in Incoloy nickel alloy for anti-noise and anti-corrosion Replacement of old water heaters Ease of installation Hidden hydraulic connections Condensate collection tray available as an accessory

Read more less