Explore our collection of Ariston products: boilers, air conditioners and water heaters. Choose reliability and energy efficiency with Ariston. Achieve the ideal comfort for your home with our high quality products. Find out more and shop online today!
Open Chamber Water Heater Ariston FAST RX 11 lt low NOx Methane cod. 3632412 new model CNG product code: 3632412 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: Gas category II2H3+ Type B11bs Open chamber with natural draft DC 3.0V battery power supply Nominal heat input: 21.5 kW Minimum thermal input: 9.5 kW Maximum nominal pressure: 10 bar Minimum operating pressure: 0.15 bar Minimum operating flow: 2.5 l/min Nominal flow rate (ΔT 25°C): 11 l/min Smoke temperature at maximum flow rate: 176°C Nox emissions: 46.5 mg/kWh CO2 emissions - Methane: 6.5% - LPG: 8.2% Minimum ambient temperature of use: 5°C Sound power: 60dB(A) Dimensions (HxWxD): 617 x 310 x 210 mm ; 10.2kg Power supply: CNG or LPG Warranty: 2 years FAST RX Instant, fast, efficient, easy gas water heaters Ariston has just launched its new range of FAST RX instantaneous gas water heaters, with this new range the user will select the ideal temperature with considerable gas and water savings, as it is not necessary to mix it with cold water. Furthermore, FAST RX is easy to use and consumes gas only when it is running. The whole range complies with the ErP 2018 regulation , which requires a lowering of NOx emissions. In addition to great efficiency, the X range stands out for its simplicity of installation, compact dimensions and comfort. Ensuring maximum peace of mind and sanitary comfort is one of Ariston's main objectives, and FAST R represents the ideal solution for any domestic hot water requirement. With the modulation of the electronic thermostat, a great stability of the hot water temperature will be obtained. FAST R heaters work with a minimum water pressure of 0.15 bar, this is achieved by modulating the burner. Counting with smoke sensors, water and flame detectors for maximum safety of use. Characteristics: Low NOx: ErP compliant 09/26/2018 Completely safe High quality components Easy to use Operation even with minimum water flow rates up to 2 l/min Presence of water flow switch for accurate temperature control Internal installation Guaranteed Italian quality EXTERNAL TEMPERATURE REGULATION It allows the user to choose the temperature that best suits his needs. INSTALLATION SIMPLICITY Product easily installed with few elements to connect SIMPLICITY OF MAINTENANCE Single-volume product with easy access to internal components for quick and easy maintenance. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€172,00
Gas water heater Ariston NEXT EVO X OUTDOOR 26 EU LPG 26 lt Low NOx - new ErP CNG product code: 3632462 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XXL profile Characteristics of heating/DHW operation: Gas category II2H3B/P Type A3 Power Supply: Cable Modulation range 1:5 Nominal heat output: 52 kW Minimum thermal power: 9.5 kW Nominal heat input: 45.2 kW Minimum heat input: 8.6 kW Min/max selectable temperature: 35-65°C Maximum nominal pressure: 10 bar Minimum operating pressure: 0.1 bar Minimum operating flow: 3 l/min Flow rate with temperature difference (Δt) 25 °C: 26 l/min Supply voltage (Freq. 50 HZ) V 230 Minimum ambient temperature of use: -20°C Maximum absorbed power: 50W Sound power dB(A) 63 Protection type IP X5 Dimensions (LxHxP): 394x570x180 mm Weight : 18.5kg Power supply: LPG Warranty: 2 years NB: THE PRODUCT IS BORN WITH CNG, IT IS TRANSFORMED USING A SPECIAL TRANSFORMATION KIT Next Evo X Outdoor The new instantaneous Low NOx outdoor gas water heater characterized by an exclusive design, small dimensions ( only 13 cm deep ) and new functions. Next Evo X Outdoor is the most efficient water heater in its category and can also be integrated with a solar thermal system. The product is equipped with a simple and intuitive remote control which further facilitates its use and enriches its design. Solar integration Thanks to the kit with thermostatic valve, NEXT EVO X OUTDOOR is set up for the integration of solar systems. An ecological solution to avoid waste and increase energy savings Standard remote control NEXT EVO X OUTDOOR can be controlled remotely thanks to the remote control that can be installed in any indoor environment. In this way it is possible to adjust the temperature from inside the home and also select the ECO operating mode for energy saving. Characteristics: Low NOx: ErP compliant 09/26/2018 Temperature control via NTC probes at the inlet and outlet of the exchanger Electronic ignition with flame control Modulation ratio up to 1:5 It does not require a fume exhaust system Standard remote control Minimum operating pressure 0.2 bar Operation even with minimum water flow rates up to 3 l/min Standard antifreeze function: up to -20° IPX5D protection Type A outdoor installation ANTIFREEZE System that prevents the freezing of the condensation water so that it can operate in heat pump mode even with air at -5 °C HIGH EFFICIENCY Product characterized by high energy performance, reduction of consumption and polluting emissions OUTDOOR INSTALLATION Possibility of outdoor installation thanks to all the weather protection devices. ELECTRONIC TEMPERATURE CONTROL Electronic control panel for easier and more immediate use. SOLAR INTEGRATION Prepared for integration with a solar thermal system. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€752,00
Electric water heater Ariston Andris Lux over sink 15/5 EU 5 year warranty 15 lt 3100536 Technical features Capacity 15 litres Net weight 7.5 kg Max working pressure bar 8 Power 1.2 kW Voltage V 220 Heating time ∆T45°C h/min 0.45 Energy class A Withdrawal profile XXS Code 3100536 Above sink installation 5 year warranty Andris Lux Electric water heater Models and versions: Countertop - 10, 15 and 30 litres. Under sink - 10,15 lt. Andris Lux is the electric water heater compliant with the new Erp regulation. Innovative design and compact shape, suitable for small volumes. The magnesium anode is oversized, of particularly large dimensions, easy to inspect or replace, to make the electrochemical protection of the boiler constantly effective. Characteristics: Temperature regulation thanks to the front knob with Economy position Immersed temperature control thermostat Resistance LED in operation Titanium enamelled storage tank at 850°C tested at 16 bar Electrical resistance in copper Inspection flange with 5 bolts Large size magnesium anode Maximum working pressure 8 bar IPX5D electrical protection Protect your electric water heater for longer! Extend the Long Life assistance program from 5 to 7 years free of charge via the Ariston official website. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€127,00
NB Article out of production in case of unavailability of the product the new model NEXT EVO X 11 will be shipped Technical features Product code: 3632160 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 19.5 Minimum thermal power kW 4.5 Modulation range 5 - 21.5 Nominal heat input kW 21.5 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 11.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 37 Protection type IPX4D Power supply: METHANE General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€428,00
Open Chamber Water Heater Ariston FAST EVO X 11 lt low NOx LPG Cod. 3632388 POWER (KW) 11 Gas category II2H3+ Type B11bs DC1.5V battery power supply Nominal thermal power 19.1 kW Minimum thermal power 8.4 kW Nominal heat input 21.5 kW Minimum heat input 9.5 kW Min/max temperature selectable 35-65 °C Flow rate (ΔT 25°C) 11 l/min Maximum nominal pressure 10 bar Minimum operating pressure 0.1 bar Sound power 60 dB(A) Minimum operating flow 2 l/min Weight 9.6kg Dimensions (LxHxD) 310 x 580 x 225 mm Energy class A Load profile M FAST evo X LOW NOx The new instantaneous Low NOx open chamber gas water heater. Both models have ionized ignition while the power supply can be battery or cable. The attractive design is further enhanced by the LCD display (model C). Low NOx: ErP compliant 09/26/2018 Electronic detection of flame presence Continuous flame modulation thanks to the NTC probe located at the exchanger outlet Minimum operating pressure 0.1 bar Operation even with minimum water flow rates up to 2 l/min Presence of water flow switch for accurate temperature control ARISTON QUALITY FOREVER AT YOUR HOME * 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. * 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. * 100% BUILT TO LAST Strong and super resistant materials, components and products developed to work in extreme conditions to deliver high-level results with maximum durability. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€200,00
Gas water heater Ariston Next Evo x Outdoor 22 Eu Methane 22 Lt Outdoor Low Nox cod. 362461 NEXT EVO X OUTDOOR 22 EU METHANE 22 l for outdoor use Low NOx - new ErP Technical features Energy efficiency: Class A Load profile: XXL profile Characteristics of heating/DHW operation: Gas category II2H3B/P Type A3 Power Supply: Cable Modulation range 1:5 Nominal heat output: 44 kW Minimum thermal power: 8.5 kW Nominal heat input: 38.3 kW Minimum heat input: 7.6 kW Min/max selectable temperature: 35-65°C Maximum nominal pressure: 10 bar Minimum operating pressure: 0.1 bar Minimum operating flow: 3 l/min Flow rate with temperature difference (Δt) 25 °C: 22 l/min Supply voltage (Freq. 50 HZ) V 230 Minimum ambient temperature of use: -20°C Maximum absorbed power: 40W Sound power dB(A) 61 Protection type IP X5 Dimensions (LxHxP): 394x570x180 mm Weight : 18.5kg Power supply: METHANE Solar integration Thanks to the kit with thermostatic valve, NEXT EVO X OUTDOOR is set up for the integration of solar systems. An ecological solution to avoid waste and increase energy savings Characteristics: Low NOx: ErP compliant 09/26/2018 Temperature control via NTC probes at the inlet and outlet of the exchanger Electronic ignition with flame control Modulation ratio up to 1:5 It does not require a fume exhaust system Standard remote control Minimum operating pressure 0.2 bar Operation even with minimum water flow rates up to 3 l/min Standard antifreeze function: up to -20° IPX5D protection External installation type A3 ANTIFREEZE System that prevents the freezing of the condensation water so that it can operate in heat pump mode even with air at -5 °C HIGH EFFICIENCY Product characterized by high energy performance, reduction of consumption and polluting emissions OUTDOOR INSTALLATION Possibility of outdoor installation thanks to all the weather protection devices. ELECTRONIC TEMPERATURE CONTROL Electronic control panel for easier and more immediate use. SOLAR INTEGRATION Prepared for integration with a solar thermal system. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€624,00
Heat Pump Water Heater Ariston Nuos Primo HC 240 SYS class A 3069655 Technical features: Type Refrigerant R-134a Minimum storage room temperature 1°C Exchanger surface 0.65m2 Thermal dispersion (PES)* 44W Annual energy consumption (average climate)* 1533 kwh/year Refrigerant charge 900 g Seasonal yield 109% Energy Class A XL load profile Article number 3069655 Heat pump water heater NEW FIRST HC New standards of efficiency thanks to the use of the heat in the air as a source of renewable energy to obtain greater comfort and high energy savings. Furthermore, the system prevents the freezing of the condensed water so that Nuos can operate in heat pump mode even with air at -5°C. Prepared for integration with a solar thermal system. RENEWABLE FUTURE WITH ENERGY EFFICIENCY ITALIAN DESIGN HIGH QUALITY' Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.898,00
Electric water heater Ariston Andris Lux over sink 10/5 EU 5 year warranty 10 l 3100534 Technical features Capacity 10 litres Net weight 6.6 Kg Max working pressure bar 8 Power 1.2 kW Voltage V 220 Heating time ∆T45°C h/min 0.30 Energy class A Withdrawal profile XXS Code 3100534 Above sink installation 5 year guarantee Andris Lux Electric water heater Models and versions: Countertop - 10, 15 and 30 litres. Under sink - 10,15 lt. Andris Lux is the electric water heater compliant with the new Erp regulation. Innovative design and compact shape, suitable for small volumes. The magnesium anode is oversized, of particularly large dimensions, easy to inspect or replace, to make the electrochemical protection of the boiler constantly effective. Characteristics: Temperature regulation thanks to the front knob with Economy position Immersed temperature control thermostat Resistance LED in operation Titanium enamelled storage tank at 850°C tested at 16 bar Electrical resistance in copper Inspection flange with 5 bolts Large size magnesium anode Maximum working pressure 8 bar IPX5D electrical protection Protect your electric water heater for longer! Extend the Long Life assistance program from 5 to 7 years free of charge via the official Ariston website. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€115,00
Electric Storage Water Heater Ariston Andris Rs Above Sink 15/3 Eu 3 Years Warranty 10 L 3100334 Technical features Capacity 15 litres Net weight 6.6 Kg Max working pressure bar 8 Power 1.2 kW Voltage V 220/240V Heating time ∆T45°C h/min 0.45 Energy class A Withdrawal profile XXS Code 3100334 3 year warranty Andris RS Eu Electric water heater Models and versions: Countertop - 10, 15 and 30 litres. Under sink - 10,15 lt. Compact solution Thanks to the mini tank, the comfort guaranteed by Ariston water heating systems is concentrated in a compact solution. Despite their small size, the three products are able to heat up to 30 liters of water. Duration over time The selection of the material years is the secret of the long life of the Andris models, all equipped with a copper heating element which ensures an anti-corrosion effect. Maximum comfort The Andris series models are equipped with an immersion thermostat, which allows absolutely precise management of the water temperature, heated to the desired point. Elegant design The ANDRIS series was designed with the elegance and style that distinguish Ariston products, thanks to the collaboration with Italian designers. Total Safety and Hygiene The products of the Andris series have passed all the safety tests required to be fully compliant with the CE directives. The copper heating element helps to increase the hygiene and purity of the product's heated water. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€113,00
Open Chamber Water Heater Ariston FAST EVO X DISPLAY ONT 11 NG Eu Methane Cod.3632391 - Low Nox TECH Technical features: Typology : Open chamber Capacity : 11 litres Class A Load profile : M Gas category: IT - II2HM3+ Maximum thermal capacity: 21.5 kW Minimum heat input: 9.5 kW Maximum thermal power: 19.1 kW Minimum thermal power: 8.4 kW Min-max hot water temperature: 35-65 °C Min-max water pressure: >0.1 / 10 Bar Minimum operating temperature °C +5 Power supply - 2x1.5V LR20 batteries Dimensions HxWxD 580x310x210 The new instantaneous Low NOx open chamber gas water heater available in both CNG and LPG versions. Fast evo x is an instantaneous natural draft gas water heater with a water flow rate of 11 litres/minute. The product is available in the LPG / methane version. Environmentally friendly: in line with the best European standards in terms of polluting emissions. It is equipped with an intuitive control panel with LCD display and guarantees maximum temperature stability thanks to the continuous modulation of the flame and accurate temperature control. Quality and reliability characterize fast evo x ensuring high sanitary comfort. Battery powered Constant hot water at the desired temperature thanks to the unique thermostatic control in the category Operation even at low flow rates and pressures for guaranteed comfort LCD display for optimal water temperature regulation - unique in the category Electronic detection of flame presence for maximum safety ARISTON quality ALWAYS AT YOUR HOME Guaranteed 100% ARISTON Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€224,00
THIS ITEM WILL BE REPLACED WITH NEXT EVO X 16 LT. COD. 3632433 Technical features Product code: 3632165 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 28 Minimum thermal power kW 5.4 Modulation range 6 - 31.0 Nominal heat input kW 31 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 49 Protection type IPX4D Power supply: METHANE General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€487,00
Ariston Nuos Primo 200 heat pump water heater energy class A code 3623238 Technical features Product code: 3069653 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: L profile Characteristics of heating/DHW operation: COP* 2.85 Heating time** h:min 6.19 Min/max air temperature °C -5/42 Max water temperature heat pump only/with R °C 55/75 Sound power *** dB(A) 53 Average absorbed electric power W 500 Nominal accumulation capacity l 200 Maximum working pressure 6 bar Maximum absorbed voltage/power V/W 220-230/2750 2 Resistance power W 2000 Standard air flow m3/h 400 Minimum volume of the installation room** m3 20 Empty weight kg 87 IP24 electrical protection Insulation thickness mm 31 Diameter of water connections " 3/4 M Minimum storage room temperature °C 1 Thermal dispersions (Pes)* W 28 Available static pressure Pa 55 Annual energy consumption (average climate)* kWh/year 912 Seasonal yield* % 112.3 V40 (quantity of water mixed at 40°C)* l 247 Dimensions mm HxWxD 1706x584x614 Nuos Primo HC Working range in heat pump with air temperatures from -5 to 42 °C R134a ecological gas allows water temperatures to be reached up to 62 °C in heat pump mode Condenser wrapped around the boiler (not immersed in water) Titanium enamelled steel boiler Immersed electric resistance Active anode (protech) + magnesium anode LCD display Functions: green, auto, boost, hourly programming of withdrawals and anti-legionella Coil and probe holder for solar or boiler integration (NUOS PRIMO HC 240 SYS) Integrated carrying straps Product for internal installation First ignition free Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.800,00
You have seen 24 out of 52 products
