Ariston Condensing Boiler Cares Premium 24 Eu Erp Methane Complete With Fume Exhaust Kit

IN THE ABSENCE OF THE PRODUCT THE NEW CARES S 24 MODEL WILL BE SHIPPED

• Product code: 3301119

• Class A heating energy efficiency
• Sanitary energy efficiency profile XL Class A
• Withdrawal profile: XL

• Nominal heat input in heating max/min: Kw 23.5/5.5
• Max/min nominal heat input in domestic hot water: Kw 23.5/5.5
• Useful thermal power in heating: max/min: Kw 22.9/5.3
• Efficiency at nominal heat input (60/80°C): 97.5%
• Efficiency at nominal heat input (30/50°C): 103.9%
• Efficiency at 30% at 30°C: 108.2%
• Max/min heating temperature (high temperatures): 82/35°C
• Max/min heating temperature (low temp.): 45/25°C
• Max/min DHW temperature: 60/36 °C
• Sanitary water production (DT=25°C): lt./min. 13.1
• Specific flow rate (first 10' with DT=30°C): lt./min. 10.5
• Total absorbed electric power W 87
• Degrees of protection of the electrical system IP X5D
• Dimensions (HxWxD) mm 745 x 400 x 319
• Power supply: METHANE

General characteristics

CARES PREMIUM EU

Simplicity, compact dimensions and good efficiency

The Ariston Cares Premium compact wall-mounted condensing boiler combines technology and ease of installation thanks to its small size.
It is made in the heating and domestic hot water production version, with 24 kW of power and is set up for integration with the system configuration via the new Bridgenet® Bus communication protocol.
Designed and built in Italy, the Cares Premium condensing boiler also provides for the management of solar energy systems and is equipped with antifreeze, anti-limescale protection and anti-blocking circulator.

Characteristics:

• Compact condensing boiler
• Aluminum-silicon condensing exchanger
• Mini-LCD display
• Modulation ratio 1:4
• Silent and compact
• BusBridgeNet® communication protocol
• Smoke outlet 80, 60 mm
  

NEW models only:

• Installation in partially protected places
• MET/LPG operation with standard kit

Ecodesign directive: from 2015 only new condensing boilers

After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings .

What is Energy Labeling?

Products for heating water and the environment represent around 30% of internal energy consumption in Europe.
Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to:

• An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated.

As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹.

How to read energy labels

There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications).

In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.).

It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product

Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.