ATTENTION ! The support feet are to be purchased separately. OFFER Floor standing fan coil Aermec Heating only FCX102A 15.24 kW with switch and control included Technical features Model : FCX102A Installation : on the floor Command and switch included Performance Thermal power at 70°C: 15.24 kW Water flow rate : 1337 l/h Load losses : 35 kPa Thermal power at 50°C : 9 kW Water flow rate : 1183 l/h Load losses : 27 kPa Thermal power at 45°C: 7.58 kW Water flow rate : 1316 l/h Load losses : 34 kPa Air flow rate : 700 ~ 920 m 3 /h Sound power level : 56 ~ 66 dB(A) Sound pressure level : 48 ~ 58 dB(A) Electrical data Power supply (V,Hz, Ø): 230V~50Hz Power Consumption: 80~131W Absorbed current : 0.58 kW Installation data Standard Coil Fitting Diameter : (3/4") Additional coil fittings diameter : (1/2") Dimensions and weight Dimensions without feet (HxWxD): 688x1320x220 mm Weight : 34.0 Kg Aermec FCX-A Efficient, silent and reliable fan coils Aermec fan coils: a combination where the company and the brand identify the products and vice versa. In this air conditioning sector Aermec is synonymous with a leader: a primary company in Italy and at the top in Europe. A position that comes from many years of experience and which has been consolidated year after year. Wide range The range consists of 16 sizes for various versions, which allow for extreme installation versatility. The complete line of accessories satisfies any customization need. All the units have been designed taking advantage of Aermec's many years of experience, acquired through daily contact with operators in the sector. Aermec fan coils are in fact designed to make their insertion into the impact and their installation as easy as possible. Furthermore, their reliability is constant, guaranteed by Aermec's many years of experience. Efficient heating Unlike other types of radiators, the low operating inertia means that the fan coils react immediately to variations in air temperature. This produces constant room temperature as conditions vary and significant energy savings, because it avoids releasing heat into the room when it is not needed. At the same time, a stepless control of the feed water temperature prevents annoying cold drafts in the winter Maximum silence FCX respects the finest hearing because it works with silence at the top of its category: no clicking or clicking of mechanical organs. Attention to health and air quality The only one of its kind, the Aermec convector, in version A, is now available with the Plasmacluster device, an exclusive system that eliminates bacteria, viruses, moulds, mites, pollen and dust. The Plasmacluster purifier restores the correct balance between positive and negative ions in closed environments, refreshes the air and guarantees an ideal condition for a healthy life. Asthma, dermatitis and other respiratory problems are often caused by pollution, dust mites, pollen and pet dander. Plasmacluter guarantees perfect sanitation of the air in closed environments, thus constituting a valid aid against the spread of allergens. FCX maintenance is reduced to periodic cleaning of the air filter, which can be done by easily removing the filter and washing it in running water. Speed ​​and savings The FCX fan coil quickly brings the perfect temperature and healthier, cleaner air at the right humidity level, both in summer and winter. Constant control of the temperature in the room is ensured by the ambient probe positioned on the cover cabinet. This allows you to adjust the temperature room by room, realizing high energy savings. Safety Full compliance with accident prevention regulations: the CE mark, the absence of sharp edges, no moving parts that can be reached by accident, the electrical connections in double insulation, the impossibility for the external parts to reach dangerous temperatures, make the operation of the fan coils Aermec absolutely safe in any type of environment, both residential and industrial. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! The support feet are to be purchased separately. Technical features Model : FCX62A Installation : on the floor Command and switch included Performance Thermal power at 70°C: 10.94 kW Water flow rate: 960.0 l/h Load losses : 11 kPa Thermal power at 50°C: 6.43 kW Water flow rate : 752.0 l/h Load losses : 7 kPa Thermal power at 45°C: 5.44 kW Water flow rate : 945 l/h Load losses : 11 kPa Air flow rate : 520 ~ 920 m 3 /h Sound power level : 42 ~ 57 dB(A) Sound pressure level : 34 ~ 49 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Power Consumption: 40~82W Absorbed current : 0.4 kW Installation data Standard Coil Fitting Diameter: 19.05mm (3/4") Additional battery connection diameter: 12.70 mm (1/2") Dimensions and weight Dimensions without feet (HxWxD): 688x1320x220 mm Feet size: 105 mm Weight : 34.0 Kg Aermec FCX-A Efficient, silent and reliable fan coils Aermec fan coils: a combination where the company and the brand identify the products and vice versa. In this air conditioning sector Aermec is synonymous with a leader: a primary company in Italy and at the top in Europe. A position that comes from many years of experience and which has been consolidated year after year. Wide range The range consists of 16 sizes for various versions, which allow for extreme installation versatility. The complete line of accessories satisfies any customization need. All the units have been designed taking advantage of Aermec's many years of experience, acquired through daily contact with operators in the sector. Aermec fan coils are in fact designed to make their insertion into the impact and their installation as easy as possible. Furthermore, their reliability is constant, guaranteed by Aermec's many years of experience. Efficient heating Unlike other types of radiators, the low operating inertia means that the fan coils react immediately to variations in air temperature. This produces constant room temperature as conditions vary and significant energy savings, because it avoids releasing heat into the room when it is not needed. At the same time, a stepless control of the feed water temperature prevents annoying cold drafts in the winter Maximum silence FCX respects the finest hearing because it works with silence at the top of its category: no clicking or clicking of mechanical organs. Attention to health and air quality The only one of its kind, the Aermec convector, in version A, is now available with the Plasmacluster device, an exclusive system that eliminates bacteria, viruses, moulds, mites, pollen and dust. The Plasmacluster purifier restores the correct balance between positive and negative ions in closed environments, refreshes the air and guarantees an ideal condition for a healthy life. Asthma, dermatitis and other respiratory problems are often caused by pollution, dust mites, pollen and pet dander. Plasmacluter guarantees perfect sanitation of the air in closed environments, thus constituting a valid aid against the spread of allergens. FCX maintenance is reduced to periodic cleaning of the air filter, which can be done by easily removing the filter and washing it in running water. Speed ​​and savings The FCX fan coil quickly brings the perfect temperature and healthier, cleaner air at the right humidity level, both in summer and winter. Constant control of the temperature in the room is ensured by the ambient probe positioned on the cover cabinet. This allows you to adjust the temperature room by room, realizing high energy savings. Safety Full compliance with accident prevention regulations: the CE mark, the absence of sharp edges, no moving parts that can be reached by accident, the electrical connections in double insulation, the impossibility for the external parts to reach dangerous temperatures, make the operation of the fan coils Aermec absolutely safe in any type of environment, both residential and industrial. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

COMPLETE WITH SWITCH AERMEC FAN COIL FAN COIL model FCZ-A 900 with control included heating only Technical Features version with switch Heating version Dimensions with feet (HxWxD): 581 x 1320 x 220 (mm) Weight without feet: 34 kg Color: white Coating RAL 9003 Headboard and plinths RAL 7047  General Features Aermec FCZ Fan Coils Drawing on the exceptional experience gained with fan coils, Aermec presents the new FCZ series where elegant design combines with cutting-edge performance in terms of noise level and energy consumption. They can be installed in any type of 2/4 pipe system and in combination with any heat generator even at low temperatures and thanks to the availability of various versions and configurations, it is easy to choose the optimal solution for any need. The FCZ series fan coils are suitable for air conditioning. These machines with a renewed design are available in various configurations depending on the installation position, with the possibility of being ducted. They are characterised by multi-speed motors coupled with ABS fans with an impeller equipped with wing profile fins and an inspectable scroll. This feature gives the machine a clear reduction in the noise level emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The unit equipped with a 3 or 4 row battery, can also have a secondary 1 or 2 row battery for 4-pipe system configurations. T-touch thermostat, available as an accessory, equipped with NFC technology to control the fan coil with a smartphone. FCZ are compatible with the VMF management system. (Features vary depending on the model) Cooling capacity: 1 ÷ 6.81 kW Thermal power: 2.4 ÷ 15.52 kW Cooling and heating Floor installation Wall installation Ceiling installation Touch control (Option) Centralized control (Option) Compatible with VMF (Variable Multi Flow) system (Option) For two-pipe systems For four-pipe systems Characteristics: Coating RAL9003, Header RAL 7047 Three-speed centrifugal fan. Electric motors with permanently inserted capacitors Protective metal cabinet with anti-corrosion polyester paint Adjustable air distribution grille for U version. When the grille is closed, the fan coil unit switches off automatically. Low pressure drop in heat exchange batteries Ease of installation and maintenance Class G2 air filter for all versions, easy to extract and clean. In the APC versions, air purification is ensured by the Plasmacluster purifier Removable and inspectable augers for easy and effective cleaning Reversibility of hydraulic connections during installation only for units with main battery, standard or oversized (Not reversible for units with secondary battery). In units with the T-Touch electronic thermostat and the ThermApp application, it is possible to simply place the smart device on the fan coil unit, to set the operating modes and the weekly time programming. It is also possible, using the graphic interface of the App, to access numerous other information such as the alarm list, the nearest Sat, etc. Available for Android operating systems Versions Without on-board control Vertical and horizontal installation: FCZ_U FCZ_UA Vertical installation FCZ_DS FCZ_AS Versions With on-board control Vertical installation only: FCZ_D FCZ_A FCZ_ACT FCZ_APC Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

AERMEC FAN COIL mod. OMNIA UL 16 with switch included Mod.: OMNIA UL 16 Cooling capacity: 1.20 - 0.71 kW Thermal power: 2.91 - 1.54 kW Water content: 0.5 lt Dimensions (HxWxD): 513 x 750 x 173 (mm) Plinth height: 93 (mm) Weight: 13.5 kg Color: white - RAL 9002 coat - Headboard and plinths RAL 7044 General Features AERMEC OMNIA UL Fan coils for universal installation for residential use, for heating, cooling and dehumidification, combinable with any heat generator. Cooling and heating Wall installation Floor installation Centrifugal fan Centralized control Compatible with the VMF (Variable Multi Flow) system For two-pipe systems The OMNIA UL (Universal Line) series units are fan coils suitable for air conditioning. Available in various configurations depending on the installation position, with the possibility of being ducted, they are characterised by multi-speed motors. They have fans in ABS material with an impeller equipped with wing profile fins and an inspectable scroll. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The UL unit, in the PC version, is equipped as standard with the PLASMACLUSTER ionising filter, while the RADIANT version is equipped with a radiant plate with an on/off or inverter motor. The units can be equipped with multiple accessories and can be integrated into the VMF - Aermec centralised hydronic management system. Versions: UL-S: version without controls, with cabinet. Compatible with the VMF System UL: version with switch and cabinet UL-C: version with electronic thermostat and cabinet UL-PC: version with electronic thermostat, Plasmacluster filter (installable only on site) and cabinet Characteristics: Cleaning the fan: With Omnia fan coils, you can easily clean the fan blades. Now, in fact, you can open the fan auger (the casing that contains the blades) and proceed with their periodic cleaning. Cleaning the condensation tray: Thanks to a new fastening system for the condensation collection tray, it can now be cleaned easily with Omnia fan coils. This important solution prevents, in the long term, the formation of bacteria, germs and mould in the tray itself, due to the condensation of humidity present in the air Electrostatically pre-charged filter: Omnia fan coils are equipped, as standard, with electrostatically pre-charged air filters. These filters, thanks to their particular construction, absorb and retain suspended dust: the ideal system to guarantee healthy air for the whole family. Silent operation: Thanks to the adoption of special centrifugal fans, Omnia fan coils have extremely silent ventilation which brings these new fan coils to the top of acoustic comfort thanks to the absence of noise peaks. UL fan coils for wall or floor installation EUROVENT Certification 3-speed centrifugal fan group Maximum silence High design aesthetics with rounded lines Adjustable air distribution grille Automatic shutdown of the fan coil unit when the air distribution grille is closed Small footprint Electronic temperature regulation, automatic speed change on the fan, automatic season change and automatic on - off (version with thermostat) Reversibility of hydraulic connections during installation Low pressure drop in heat exchange batteries Electric motors with permanently inserted capacitors Ease of installation and maintenance Easy to remove and clean air filter Electrostatically pre-charged filter Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

COMPLETE WITH SWITCH AERMEC FAN COIL FAN COIL model FCZ-A 600 with control included heating only Technical Features version with switch Heating version Dimensions with feet (HxWxD): 576 x 1320 x 220 (mm) Weight without feet: 13 kg Color: white Coating RAL 9003 Headboard and plinths RAL 7047 General Features Aermec FCZ Fan Coils Drawing on the exceptional experience gained with fan coils, Aermec presents the new FCZ series where elegant design combines with cutting-edge performance in terms of noise level and energy consumption. They can be installed in any type of 2/4 pipe system and in combination with any heat generator even at low temperatures and thanks to the availability of various versions and configurations, it is easy to choose the optimal solution for any need. The FCZ series fan coils are suitable for air conditioning. These machines with a renewed design are available in various configurations depending on the installation position, with the possibility of being ducted. They are characterised by multi-speed motors coupled with ABS fans with an impeller equipped with wing profile fins and an inspectable scroll. This feature gives the machine a clear reduction in the noise level emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The unit equipped with a 3 or 4 row battery, can also have a secondary 1 or 2 row battery for 4-pipe system configurations. T-touch thermostat, available as an accessory, equipped with NFC technology to control the fan coil with a smartphone. FCZ are compatible with the VMF management system. (Features vary depending on the model) Cooling capacity: 1 ÷ 6.81 kW Thermal power: 2.4 ÷ 15.52 kW Cooling and heating Floor installation Wall installation Ceiling installation Touch control (Option) Centralized control (Option) Compatible with VMF (Variable Multi Flow) system (Option) For two-pipe systems For four-pipe systems Characteristics: Coating RAL9003, Header RAL 7047 Three-speed centrifugal fan. Electric motors with permanently inserted capacitors Protective metal cabinet with anti-corrosion polyester paint Adjustable air distribution grille for U version. When the grille is closed, the fan coil unit switches off automatically. Low pressure drop in heat exchange batteries Ease of installation and maintenance Class G2 air filter for all versions, easy to extract and clean. In the APC versions, air purification is ensured by the Plasmacluster purifier Removable and inspectable augers for easy and effective cleaning Reversibility of hydraulic connections during installation only for units with main battery, standard or oversized (Not reversible for units with secondary battery). In units with the T-Touch electronic thermostat and the ThermApp application, it is possible to simply place the smart device on the fan coil unit, to set the operating modes and the weekly time programming. It is also possible, using the graphic interface of the App, to access numerous other information such as the alarm list, the nearest Sat, etc. Available for Android operating systems Versions Without on-board control Vertical and horizontal installation: FCZ_U FCZ_UA Vertical installation FCZ_DS FCZ_AS Versions With on-board control Vertical installation only: FCZ_D FCZ_A FCZ_ACT FCZ_APC Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

FAN COIL FAN COIL AERMEC mod. OMNIA UL 36 with switch included Model: OMNIA UL 36 Cooling capacity: 2.8 - 1.6 kW Thermal power: 5.9 - 3.5 kW Water content: 1.1 litres Dimensions (HxWxD): 513 x 1200 x 173 (mm) Plinth Height: 93 (mm) Weight: 19.5 kg White color - Coat RAL 9002 - Headboard and Plinths RAL 7044 General characteristics AERMEC OMNIA UL Fan coils for universal installation for residential use, for heating, cooling and dehumidification, which can be combined with any heat generator. Cooling and heating Wall installation Floor installation Centrifugal fan Centralized control Compatible with VMF (Variable Multi Flow) system For two-pipe systems The units of the OMNIA UL (Universal Line) series are fan coil units suitable for air conditioning. Available in various configurations depending on the installation position, with the possibility of being ducted, they are characterized by multi-speed motors. They have fans in ABS material with an impeller equipped with airfoil fins and an inspectable cochlea. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The UL unit, in the PC version, is equipped as standard with the PLASMACLUSTER ionizing filter, while the RADIANT version is equipped with a radiant plate with on/off motor or inverter. The units can be equipped with multiple accessories and can be integrated into the VMF - Aermec centralized hydronic management system. Versions: UL-S: version without controls, with cabinet. Compatible with the VMF system UL: version with switch and cabinet UL-C: version with electronic thermostat and cabinet UL-PC: version with electronic thermostat, Plasmacluster filter (can be installed on site only) and mobile Characteristics: Cleaning the fan: With Omnia fan coils you can easily clean the fan blades. Now, in fact, it is possible to open the cochlea of ​​the fan (the casing that encloses the blades) and proceed with their periodic cleaning. Cleaning the condensate tray: Thanks to a new fixing system for the condensate collection tray, now, with Omnia fan coils, it can be cleaned easily. This important solution avoids, in the long term, the formation of bacteria, germs and molds in the basin itself, due to the condensation of the humidity present in the air Electrostatically precharged filter: Omnia fan coils are equipped, as standard, with electrostatically precharged air filters. These filters, thanks to their particular construction, absorb and retain suspended dust: the ideal system to ensure healthy air for the whole family. Silent operation: Thanks to the adoption of special centrifugal fans, the Omnia fan coils have extremely silent ventilation which takes these new fan coils to the top of acoustic comfort thanks to the absence of noise peaks UL listed fan coil units for wall or floor installation EUROVENT certification 3-speed centrifugal fan group Maximum silence High design aesthetics with rounded lines Adjustable air distribution grille Automatic switch-off of the fan coil by closing the air distribution grille Small dimensions Electronic temperature regulation, automatic speed change on the fan, automatic season change and automatic on - off (version with thermostat) Reversibility of the hydraulic connections during installation Low pressure drop in the heat exchange coils Electric motors with permanently inserted capacitors Ease of installation and maintenance Easy to remove and clean air filter Electrostatically preloaded filter Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! The support feet are to be purchased separately. OFFER Floor standing fan coil Aermec Heating only FCX82ACT 13.5 kW with Electronic Thermostat Technical features Model : FCX82A Installation : on the floor Electronic thermostat Performance Thermal power at 70°C: 13.35 kW Water flow rate : 1171 l/h Load losses : 16 kPa Thermal power at 50°C: 6.86 kW Water flow rate : 860 l/h Load losses : 12 kPa Thermal power at 45°C: 6.64 kW Water flow rate : 1152 l/h Load losses : 16 kPa Air flow rate : 700 ~ 920 m 3 /h Sound power level : 51 ~ 62 dB(A) Sound pressure level : 43 ~ 54 dB(A) Electrical data Power supply (V,Hz, Ø): 230V~50Hz Power Consumption: 52~106W Absorbed current : 0.49 kW Installation data Standard Coil Fitting Diameter : (3/4") Additional coil fittings diameter : (1/2") Dimensions and weight Dimensions without feet (HxWxD): 688x1320x220 mm Weight : 34.0 Kg Aermec FCX-ACT Efficient, silent and reliable fan coils Aermec fan coils: a combination where the company and the brand identify the products and vice versa. In this air conditioning sector Aermec is synonymous with a leader: a primary company in Italy and at the top in Europe. A position that comes from many years of experience and which has been consolidated year after year. Wide range The range consists of 16 sizes for various versions, which allow for extreme installation versatility. The complete line of accessories satisfies any customization need. All the units have been designed taking advantage of Aermec's many years of experience, acquired through daily contact with operators in the sector. Aermec fan coils are in fact designed to make their insertion into the impact and their installation as easy as possible. Furthermore, their reliability is constant, guaranteed by Aermec's many years of experience. Efficient heating Unlike other types of radiators, the low operating inertia means that the fan coils react immediately to variations in air temperature. This produces constant room temperature as conditions vary and significant energy savings, because it avoids releasing heat into the room when it is not needed. At the same time, a stepless control of the feed water temperature prevents annoying cold drafts in the winter The FCX ACT fan coil concentrates high technological and functional characteristics that make it the ideal means of air conditioning for any environment. The supply of conditioned air is immediate and distributed throughout the room; FCX ACT generates heat if inserted in a heating system with boiler or heat pump but can also be used in the summer months as an air conditioner if the heating system is equipped with a water chiller. The FCX ACT fan coil is designed to satisfy every system need, thanks also to the wide range of accessories. Ease of installation With reversible hydraulic connections during installation. Full compliance with accident prevention regulations. Routine maintenance is reduced to periodic cleaning of the air filter with a vacuum cleaner. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

COMPLETE WITH SWITCH AERMEC FAN COIL FAN COIL model FCZ-ACT 200 with electronic control Technical features version with electronic thermostat vertical installation only - for two-pipe systems Hot-cold kW (High): 2.95 - 1.29 Dimensions with feet (HxWxD): 576 x 750 x 220 (mm) Weight without feet: 15 kg White color - Coat RAL 9003 - Headboard and Plinths RAL 7047 General characteristics Aermec FCZ fan coils Taking advantage of the exceptional experience gained with fan coil units, Aermec presents the new FCZ series where elegant design marries state-of-the-art performance in terms of sound level and energy consumption. They can be installed in any type of 2/4 pipe system and in combination with any heat generator even at low temperatures and thanks to the availability of various versions and configurations, it is easy to choose the optimal solution for any requirement. FCZ series fan coils are suitable for air conditioning. These machines with a renewed design are available in various configurations according to the installation position, with the possibility also of being ducted. They are characterized by multi-speed motors coupled to ABS fans with an impeller equipped with airfoil fins and an inspectable auger. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The unit equipped with a 3 or 4-row coil can have an additional 1 or 2-row secondary coil for 4-pipe system configurations. T-touch thermostat, available as an accessory, equipped with NFC technology to control the fan coil with smartphone. FCZ are compatible with the VMF management system. (Features vary by model) Cooling capacity: 1 ÷ 6.81 kW Thermal power: 2.4 ÷ 15.52 kW Cooling and heating Floor installation Wall installation Ceiling installation Touch control (Option) Centralized control (Option) Compatible with VMF (Variable Multi Flow) system (Option) For two-pipe systems For four-pipe systems Characteristics: RAL9003 shell, RAL 7047 head Three speed centrifugal fan. Electric motors with permanently inserted capacitors Protective metal cabinet with anti-corrosion polyester paint Adjustable air distribution grille for U version. When the grille closes, the fan coil switches off automatically Low pressure drop in the heat exchange coils Ease of installation and maintenance G2 class air filter for all versions, easy to remove and clean. In the APC versions, air purification is ensured by the Plasmacluster purifier Extractable and inspectable augers for easy and effective cleaning Reversibility of the water connections during installation only for units with main, standard or oversized coil (Non-reversible for units with secondary coil). In the units with the T-Touch electronic thermostat and the ThermApp application, it is possible to simply place the smart device on the fan coil to set the operating modes and the weekly time programming. Using the graphical interface of the App, it is also possible to access numerous other information such as the alarm list, the nearest satellite, etc. Available for Android operating systems Versions Without on-board control Vertical and horizontal installation: FCZ_U FCZ_UA Vertical installation FCZ_DS FCZ_AS Versions With on-board control Vertical installation only: FCZ_D FCZ_A FCZ_ACT FCZ_APC Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Control with PXAE wall thermostat with SW3 water probe

Read more less

ATTENTION ! The support feet are to be purchased separately. OFFER Floor standing fan coil Aermec Heating only FCX82A 13.5 kW with switch and control included Technical features Model : FCX82A Installation : on the floor Command and switch included Performance Thermal power at 70°C: 13.35 kW Water flow rate : 1171 l/h Load losses : 16 kPa Thermal power at 50°C: 6.86 kW Water flow rate : 860 l/h Load losses : 12 kPa Thermal power at 45°C: 6.64 kW Water flow rate : 1152 l/h Load losses : 16 kPa Air flow rate : 700 ~ 920 m 3 /h Sound power level : 51 ~ 62 dB(A) Sound pressure level : 43 ~ 54 dB(A) Electrical data Power supply (V,Hz, Ø): 230V~50Hz Power Consumption: 52~106W Absorbed current : 0.49 kW Installation data Standard Coil Fitting Diameter : (3/4") Additional coil fittings diameter : (1/2") Dimensions and weight Dimensions without feet (HxWxD): 688x1320x220 mm Weight : 34.0 Kg Aermec FCX-A Efficient, silent and reliable fan coils Aermec fan coils: a combination where the company and the brand identify the products and vice versa. In this air conditioning sector Aermec is synonymous with a leader: a primary company in Italy and at the top in Europe. A position that comes from many years of experience and which has been consolidated year after year. Wide range The range consists of 16 sizes for various versions, which allow for extreme installation versatility. The complete line of accessories satisfies any customization need. All the units have been designed taking advantage of Aermec's many years of experience, acquired through daily contact with operators in the sector. Aermec fan coils are in fact designed to make their insertion into the impact and their installation as easy as possible. Furthermore, their reliability is constant, guaranteed by Aermec's many years of experience. Efficient heating Unlike other types of radiators, the low operating inertia means that the fan coils react immediately to variations in air temperature. This produces constant room temperature as conditions vary and significant energy savings, because it avoids releasing heat into the room when it is not needed. At the same time, a stepless control of the feed water temperature prevents annoying cold drafts in the winter Maximum silence FCX respects the finest hearing because it works with silence at the top of its category: no clicking or clicking of mechanical organs. Attention to health and air quality The only one of its kind, the Aermec convector, in version A, is now available with the Plasmacluster device, an exclusive system that eliminates bacteria, viruses, moulds, mites, pollen and dust. The Plasmacluster purifier restores the correct balance between positive and negative ions in closed environments, refreshes the air and guarantees an ideal condition for a healthy life. Asthma, dermatitis and other respiratory problems are often caused by pollution, dust mites, pollen and pet dander. Plasmacluter guarantees perfect sanitation of the air in closed environments, thus constituting a valid aid against the spread of allergens. FCX maintenance is reduced to periodic cleaning of the air filter, which can be done by easily removing the filter and washing it in running water. Speed ​​and savings The FCX fan coil quickly brings the perfect temperature and healthier, cleaner air at the right humidity level, both in summer and winter. Constant control of the temperature in the room is ensured by the ambient probe positioned on the cover cabinet. This allows you to adjust the temperature room by room, realizing high energy savings. Safety Full compliance with accident prevention regulations: the CE mark, the absence of sharp edges, no moving parts that can be reached by accident, the electrical connections in double insulation, the impossibility for the external parts to reach dangerous temperatures, make the operation of the fan coils Aermec absolutely safe in any type of environment, both residential and industrial. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

COMPLETE WITH SWITCH FAN COIL FAN COIL AERMEC model FCZ-A 100 with control included heating only Technical features version with switch Heating version Dimensions with feet (HxWxD): 586 x 640 x 220 (mm) Weight without feet: 13 kg White color - Coat RAL 9003 - Headboard and Plinths RAL 7047 General characteristics Aermec FCZ fan coils Taking advantage of the exceptional experience gained with fan coil units, Aermec presents the new FCZ series where elegant design marries state-of-the-art performance in terms of sound level and energy consumption. They can be installed in any type of 2/4 pipe system and in combination with any heat generator even at low temperatures and thanks to the availability of various versions and configurations, it is easy to choose the optimal solution for any requirement. FCZ series fan coils are suitable for air conditioning. These machines with a renewed design are available in various configurations according to the installation position, with the possibility also of being ducted. They are characterized by multi-speed motors coupled to ABS fans with an impeller equipped with airfoil fins and an inspectable auger. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The unit equipped with a 3 or 4-row coil can have an additional 1 or 2-row secondary coil for 4-pipe system configurations. T-touch thermostat, available as an accessory, equipped with NFC technology to control the fan coil with smartphone. FCZ are compatible with the VMF management system. (Features vary by model) Cooling capacity: 1 ÷ 6.81 kW Thermal power: 2.4 ÷ 15.52 kW Cooling and heating Floor installation Wall installation Ceiling installation Touch control (Option) Centralized control (Option) Compatible with VMF (Variable Multi Flow) system (Option) For two-pipe systems For four-pipe systems Characteristics: RAL9003 shell, RAL 7047 head Three speed centrifugal fan. Electric motors with permanently inserted capacitors Protective metal cabinet with anti-corrosion polyester paint Adjustable air distribution grille for U version. When the grille closes, the fan coil switches off automatically Low pressure drop in the heat exchange coils Ease of installation and maintenance G2 class air filter for all versions, easy to remove and clean. In the APC versions, air purification is ensured by the Plasmacluster purifier Extractable and inspectable augers for easy and effective cleaning Reversibility of the water connections during installation only for units with main, standard or oversized coil (Non-reversible for units with secondary coil). In the units with the T-Touch electronic thermostat and the ThermApp application, it is possible to simply place the smart device on the fan coil to set the operating modes and the weekly time programming. Using the graphical interface of the App, it is also possible to access numerous other information such as the alarm list, the nearest satellite, etc. Available for Android operating systems Versions Without on-board control Vertical and horizontal installation: FCZ_U FCZ_UA Vertical installation FCZ_DS FCZ_AS Versions With on-board control Vertical installation only: FCZ_D FCZ_A FCZ_ACT FCZ_APC Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

COMPLETE WITH SWITCH FAN COIL FAN COIL AERMEC model FCZ-A 700 with control included heating only Technical features version with switch Heating version Dimensions with feet (HxWxD): 576 x 1320 x 220 (mm) Weight without feet: kg 29 White color Coat RAL 9003 Headboard and Plinths RAL 7047  General characteristics Aermec FCZ fan coils Taking advantage of the exceptional experience gained with fan coil units, Aermec presents the new FCZ series where elegant design marries state-of-the-art performance in terms of sound level and energy consumption. They can be installed in any type of 2/4 pipe system and in combination with any heat generator even at low temperatures and thanks to the availability of various versions and configurations, it is easy to choose the optimal solution for any requirement. FCZ series fan coils are suitable for air conditioning. These machines with a renewed design are available in various configurations according to the installation position, with the possibility also of being ducted. They are characterized by multi-speed motors coupled to ABS fans with an impeller equipped with airfoil fins and an inspectable auger. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The unit equipped with a 3 or 4-row coil can have an additional 1 or 2-row secondary coil for 4-pipe system configurations. T-touch thermostat, available as an accessory, equipped with NFC technology to control the fan coil with smartphone. FCZ are compatible with the VMF management system. (Features vary by model) Cooling capacity: 1 ÷ 6.81 kW Thermal power: 2.4 ÷ 15.52 kW Cooling and heating Floor installation Wall installation Ceiling installation Touch control (Option) Centralized control (Option) Compatible with VMF (Variable Multi Flow) system (Option) For two-pipe systems For four-pipe systems Characteristics: RAL9003 shell, RAL 7047 head Three speed centrifugal fan. Electric motors with permanently inserted capacitors Protective metal cabinet with anti-corrosion polyester paint Adjustable air distribution grille for U version. When the grille closes, the fan coil switches off automatically Low pressure drop in the heat exchange coils Ease of installation and maintenance G2 class air filter for all versions, easy to remove and clean. In the APC versions, air purification is ensured by the Plasmacluster purifier Extractable and inspectable augers for easy and effective cleaning Reversibility of the water connections during installation only for units with main, standard or oversized coil (Non-reversible for units with secondary coil). In the units with the T-Touch electronic thermostat and the ThermApp application, it is possible to simply place the smart device on the fan coil to set the operating modes and the weekly time programming. Using the graphical interface of the App, it is also possible to access numerous other information such as the alarm list, the nearest satellite, etc. Available for Android operating systems Versions Without on-board control Vertical and horizontal installation: FCZ_U FCZ_UA Vertical installation FCZ_DS FCZ_AS Versions With on-board control Vertical installation only: FCZ_D FCZ_A FCZ_ACT FCZ_APC Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less