Discover our wide range of accessories for pumps and electric pumps to optimize the performance of your system. Find everything you need, from filters to control valves, to keep you running efficiently and reliably. Maximize the efficiency of your system with our quality accessories.
Accessories for pumps and electric pumps
Grundfos Grundfos Single-Stage Submersible Drainage Pump Model Unilift Cc 7 A1 From 0.51 Kw
Technical Features Model : UNILIFT CC 7 A1 Mouth size ; G 1 1/4 Power : 0.38 kW / 0.51 HP Intensity: 1.80 A Cable: 10m UNILIFT CC The Unilift CC pump is a single stage submersible drainage pump designed for pumping drainage water and grey waste water. The Unilift CC pump can take water up to a level of 3 mm above the floor, removing the filter. The Unilift CC pump is suitable for permanent and temporary installations. The Unilift CC pump is equipped with a flap check valve on the discharge port to prevent backflow from the pipework. An adapter ensures the correct connections to 3/4" or 1 1/4" discharge ports. The filter is made of stainless steel while the main parts of the pump, such as the body and housing, are made of molded composite materials. The Multibox B-CC7 is a Unilift CC pump combined with additional elements such as a hose with Storz coupling, adapter for threaded Storz coupling and a box with perforated mesh sides to be used as a pre-filter for the pump. It is the perfect solution to use as an emergency kit for single-family homes in the event of flooding. Applications The Unilift CC pump is designed for the following pumping applications: Water and rainwater in agriculture Water from rivers and lakes Rainwater and drainage Water for filling/emptying tanks, ponds, cans, etc. Effluents from showers, car washes and wells below the level of the sewer system Pool water Ditch drainage water Groundwater (lowering applications) Effluents from viaducts, underpasses, etc. Drainage water from splinker systems in garages. Features and Benefits Composite materials Stainless steel filter Automatic air vent valve on the handle Available with level switch Suitable for low suction levels Compact shape for easy movement and cleaning Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 12 months from the date of purchase
€255,00
-
Grundfos Grundfos Two Pump Scale 1 Installation Kit Twin Set 99725165
Grundfos two-pump installation kit SCALA1 TWIN SET 99725165 General characteristics Brand: Grundfos Model: SCALA1 TWIN SET Code: 99725165 Data sheet Potable Water Approvals: WRAS,ACS Material Basis: Composite O-rings: rubber, NBR Composite collector Screw material: stainless steel Isolation valve: brass Installation Max operating pressure: 8 bar Connection type: Rp input Send type: Rp Input connection size: 1 inch Outlet connection size: 5/4 inch No. of screws: 4 number of base plates: 1 number of collectors: 2 number of valves 4 number of O-rings: 2 Electrical data Cable length: 0.8m number of power cords: 1 Other Net weight: 4.6kg Gross weight: 5.3kg Packaging volume: 0.017 m³ Suitable for the following products: SCALA1 Description Useful to: Pressure Boost - Commercial Buildings Collection of groundwater for domestic use Increased water pressure for domestic use Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
€425,00
-
Grundfos Grundfos Horizontal Multistage Centrifugal Pump Model Cm 3-5 From 0.75 Hp Single-Phase
Technical features Model : CM 3-5 Voltage : 1 x 220-240V Flow rate : 4 m3 / h Head : 20.6 m Power : 0.50kW / 0.75kW Suction : Rp 1" Send : Rp 1" Sound power level : 53 dB(A) Grundfos CM-A The two main features of the horizontal multistage CM pump are compactness and modularity, which make different configurations possible. The pump is mainly composed of a series of interchangeable modules, designed to work together for a long time, regardless of the application. CM pumps are equipped with mains powered motors. The CM pump is mainly used as an integrated pump in OEM solutions and in household compressors. It is compact, silent, reliable and flexible and all this makes it an optimal solution for installation and interaction with other components in large systems. It can be installed in systems or used as an independent pump. GRUNDFOS MULTISTAGE SINGLE-PHASE CENTRIFUGAL PUMP SERIES CM3-3 CM is the Grundfos centrifugal electric pump series. Excellent for a wide range of applications, it stands out for its excellent technical characteristics and ease of use. GREAT INSTALLATION AND USE MODULARITY The peculiar feature of the Grundfos CM electric pump is the quality of the components. The shaft, impellers and chambers are in stainless steel, the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The thread is of the Whitworth RP type. The engine is air cooled. The electric pump is equipped with thermal protection with automatic reset for any faults caused by both slow and rapid increases in temperature (constant overload and stall conditions). It is capable of withstanding dry running for short periods. The compact dimensions and the lowered base allow it to be installed even where space is limited. APPLICATIONS The Grundfos centrifugal CM is an electric pump ideal for pressurizing and moving liquids on the surface. There are many applications: washing systems of all kinds, withdrawal from tanks, domestic supply, pressurisation, irrigation, swimming pools, fountains, etc. GUARANTEED SAVINGS AND HIGH COMFORT Grundfos motors are characterized by their high efficiency in relation to low electrical consumption. The savings also materialize in the duration over time due to the high construction quality and the materials used. The shaft, the impellers and the chambers are in stainless steel, the pump body with the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The engine is air cooled. The remarkable reactivity to the demand for water and the silent operation contribute considerably to the efficiency of the product and to the comfort produced both in domestic and professional uses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase
€346,00
-
Grundfos Grundfos Horizontal Multistage Centrifugal Pump Model Cm 3-4 From 0.7 Hp Single-Phase
Technical features Model : CM 3-4 Voltage : 1 x 220-240V Flow rate : 4 m3 / h Head : 36 m Power : 0.50kW / 0.7kW Suction : Rp 1" Send : Rp 1" Sound power level : 53 dB(A) Dimensions Height : 20.8cm Length : 30.4cm Width : 14.1cm Weight : 12.00 Kg Grundfos CM-A The two main features of the horizontal multistage CM pump are compactness and modularity, which make different configurations possible. The pump is mainly composed of a series of interchangeable modules, designed to work together for a long time, regardless of the application. CM pumps are equipped with mains powered motors. The CM pump is mainly used as an integrated pump in OEM solutions and in household compressors. It is compact, silent, reliable and flexible and all this makes it an optimal solution for installation and interaction with other components in large systems. It can be installed in systems or used as an independent pump. GRUNDFOS MULTISTAGE SINGLE-PHASE CENTRIFUGAL PUMP CM 3-4 SERIES CM is the Grundfos centrifugal electric pump series. Excellent for a wide range of applications, it stands out for its excellent technical characteristics and ease of use. GREAT INSTALLATION AND USE MODULARITY The peculiar feature of the Grundfos CM electric pump is the quality of the components. The shaft, impellers and chambers are in stainless steel, the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The thread is of the Whitworth RP type. The engine is air cooled. The electric pump is equipped with thermal protection with automatic reset for any faults caused by both slow and rapid increases in temperature (constant overload and stall conditions). It is capable of withstanding dry running for short periods. The compact dimensions and the lowered base allow it to be installed even where space is limited. APPLICATIONS The Grundfos centrifugal CM is an electric pump ideal for pressurizing and moving liquids on the surface. There are many applications: washing systems of all kinds, withdrawal from tanks, domestic supply, pressurisation, irrigation, swimming pools, fountains, etc. GUARANTEED SAVINGS AND HIGH COMFORT Grundfos motors are characterized by their high efficiency in relation to low electrical consumption. The savings also materialize in the duration over time due to the high construction quality and the materials used. The shaft, the impellers and the chambers are in stainless steel, the pump body with the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The engine is air cooled. The remarkable reactivity to the demand for water and the silent operation contribute considerably to the efficiency of the product and to the comfort produced both in domestic and professional uses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase
€315,00
-
Grundfos Grundfos Horizontal Multistage Centrifugal Pump Model Cm 3-3 From 0.67 Hp Single-Phase
Technical features Model : CM 3-3 Voltage : 1 x 220-240V Flow rate: 3.1 m3 / h Head : 20.6 m Power : 0.50kW / 0.67kW Suction : Rp 1" Send : Rp 1" Sound power level : 53 dB(A) Dimensions Height : 20.8cm Length : 30.4cm Width : 14.1cm Weight : 12.00 Kg Grundfos CM-A The two main features of the horizontal multistage CM pump are compactness and modularity, which make different configurations possible. The pump is mainly composed of a series of interchangeable modules, designed to work together for a long time, regardless of the application. CM pumps are equipped with mains powered motors. The CM pump is mainly used as an integrated pump in OEM solutions and in household compressors. It is compact, silent, reliable and flexible and all this makes it an optimal solution for installation and interaction with other components in large systems. It can be installed in systems or used as an independent pump. GRUNDFOS MULTISTAGE SINGLE-PHASE CENTRIFUGAL PUMP CM3-3 SERIES CM is the Grundfos centrifugal electric pump series. Excellent for a wide range of applications, it stands out for its excellent technical characteristics and ease of use. GREAT INSTALLATION AND USE MODULARITY The peculiar feature of the Grundfos CM electric pump is the quality of the components. The shaft, impellers and chambers are in stainless steel, the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The thread is of the Whitworth RP type. The engine is air cooled. The electric pump is equipped with thermal protection with automatic reset for any faults caused by both slow and rapid increases in temperature (constant overload and stall conditions). It is capable of withstanding dry running for short periods. The compact dimensions and the lowered base allow it to be installed even where space is limited. APPLICATIONS The Grundfos centrifugal CM is an electric pump ideal for pressurizing and moving liquids on the surface. There are many applications: washing systems of all kinds, withdrawal from tanks, domestic supply, pressurisation, irrigation, swimming pools, fountains, etc. GUARANTEED SAVINGS AND HIGH COMFORT Grundfos motors are characterized by their high efficiency in relation to low electrical consumption. The savings also materialize in the duration over time due to the high construction quality and the materials used. The shaft, the impellers and the chambers are in stainless steel, the pump body with the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The engine is air cooled. The remarkable reactivity to the demand for water and the silent operation contribute considerably to the efficiency of the product and to the comfort produced both in domestic and professional uses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase
€295,00
-
Grundfos Grundfos Domestic Pressure Booster Circulator Mod. Upa 15-120 With Pressure Switch For Automatic Start 99553575
Circulator Pump for domestic pressure increase GRUNDFOS mod. UPA 15-120 with pressure switch for automatic start Liquid: Pumped liquid: water Liquid temperature range: 2 .. 95 ° C Liquid temperature during operation: 60°C Density: 983.2kg/m³ Technician: TF class: 95 Approvals on nameplate: CE, WEEE materials: Pump body: cast iron Impeller: PP Composit Installation: Maximum working pressure: 10 bar Pipe connection: 1 Door to door length: 200mm Electrical data: Max. power consumption: 200W Network frequency: 50Hz Rated Voltage: 1 x 230V Current in speed 3: 0.89A Capacitor size - stroke: 6 μF Protection class (IEC 34-5): X2D Insulation class (IEC 85): F Others: Gross weight: 5.3kg Shipping volume: 0.006 m³ UPA The UPA pump is designed for increasing the pressure of domestic water in residential houses. The pump can be used to increase pressure in showers, faucets and other domestic water outlets. The UPA can be used in open systems and can also be connected directly to the main water pipe. A flow switch starts and stops the pump when the water outlet is opened or closed. The pump is supplied with a cable and a Schuko socket, but without unions or counterflanges Domestic applications requiring high pressure in faucets, showers, gas boiler outlets and other household tapping points: Tank amplification on the roof Instant boiler (without tank) Domestic rise with inlet pressure Suitable for hot and cold water applications. Temperatures up to 95°C. Capable of raising water in several outlets at a time (1-4 taps) making it suitable for apartments with a shared water supply and for single family homes: Urban areas with low water pressure at maximum demand Apartments sharing low pressure water supply Rural areas with low water pressure Product Warranty All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
€210,00
-
Grundfos Grundfos Self-priming Electric Pump Model Scala2 From 0.75 Hp
Technical features Model : SCALA2 Maximum ambient temperature 55°C Nominal flow rate : 3 m 3 /h Adjustable constant pressure: min 1.5 bar / max 5.5 * bar Maximum inlet pressure: 6 bar - (*) 1.5 bar required to reach 5.5 bar Supply voltage: 1 x 220-240V, 50/60Hz Noise level: <47dB (A) (indoor installation) Maximum liquid temperature 45°C Maximum system pressure 10 bar IP class X4D (outdoor installation) Max. 3 floors Taps Max. 8 Dimensions Height: 302mm Length: 403mm Width: 193mm Weight 10kg Scale2 Optimal water pressure - Small size and easy to install SCALA2 is a fully integrated booster pump that generates optimum water pressure in all taps simultaneously, even when several taps are opened at the same time and even when the shower is in use. It is equipped with pump, motor, tank, sensor, frequency converter and non-return valve; all in one compact unit. With intelligent pump control, SCALA2 automatically adapts performance based on suction pressure and water usage in the home. Thanks to the water-cooled motor, SCALA2 enjoys a very low noise level, similar to that of a modern dishwasher What is intelligent pump control? SCALA2 is equipped with a pre-installed sensor which constantly measures the delivery pressure. In the event that the pressure is lower than that requested, SCALA2 will intervene immediately to increase it. This is intelligent pump control; the result is optimal water pressure Advantages Optimum water pressure: The intelligent pump control adapts the pump operation automatically Low Noise: Noise is similar to a modern dishwasher (47 dB(A) during normal use) Simplified selection: One model for all domestic pressure boosting needs Easy installation: Small size, fully integrated solution, plug & pump Easy to set up: Intuitive dashboard Reliable operation: Dry-running and anti-cyclic protection Long life: High quality and low maintenance Applications SCALA2 is the right choice for residential buildings up to 3 floors and 8 taps. Pressure increase from the mains : Increases the pressure of the water supplied by the mains Tank Pressure Boost : Increases water pressure from rooftop tanks, intermediate tanks and ground tanks, including rainwater tanks. Pressure increase from wells : The maximum suction depth is 8 metres Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase
€770,00
-
Grundfos Grundfos Self-priming Electric Pump Model Jp6 From 1.81 Hp Single-Phase
Technical features Flow rate up to: 5 m 3 /h Head up to: 50 m high Power supply : Single-phase Voltage : 1 x 230V Power : 1.4 kW / 1.81 HP Maximum Working Pressure: 6 Bar Maximum Suction Height: 7 metres Pumped Liquid Temperature : from -10°C to +40°C Protection : IP44 ( Pump ) , IP65 ( PM1 and PM2 control ) Pumped Liquids: Clean, non-aggressive liquids free from solid particles and fibres Pump suction : G1 Pump Delivery : G1 Materials Composition Pump Pump body, intermediate chamber, impeller and shaft: Stainless steel Painting and electrocataphoresis treatment make the engine resistant to corrosion Grundfos The JP pump is a single stage self-priming centrifugal pump with axial inlet port and radial discharge port. The pump features a built-in ejector with guide vanes for optimum self-priming properties. Built for a long, trouble-free working life, the compact and convenient Grundfos JP pump is suitable for a wide range of water supplies and tasks around the home, garden and leisure, as well as agriculture, horticulture and to small service companies. When used in conjunction with a pressure control or reservoir the JP pump is ideal for water supply systems. Features and Benefits Self priming Stable operation even in the presence of air in the liquid Robust design which makes the pump also suitable for fixed installation The pump is directly coupled to a special fan-cooled asynchronous motor adapted to the pump performance Single-stage motors have a built-in thermal switch and require no additional motor protection Three-stage motors require external motor protection. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase
€228,20
-
Grundfos Grundfos Self-priming Electric Pump Model Jp5 From 1.03 Hp Single-Phase
Technical features Flow rate up to: 3.5 m 3 /h Head up to : 42 m high Power supply : Single-phase Voltage : 1 x 230V Power : 0.85 kW / 1.03HP Maximum Working Pressure: 6 Bar Maximum Suction Height: 7 metres Pumped Liquid Temperature : from -10°C to +40°C Protection : IP44 ( Pump ) , IP65 ( PM1 and PM2 control ) Pumped Liquids: Clean, non-aggressive liquids free from solid particles and fibres Materials Composition Pump Pump body, intermediate chamber, impeller and shaft: Stainless steel Painting and electrocataphoresis treatment make the engine resistant to corrosion Grundfos The JP pump is a single stage self-priming centrifugal pump with axial inlet port and radial discharge port. The pump features a built-in ejector with guide vanes for optimum self-priming properties. Built for a long, trouble-free working life, the compact and convenient Grundfos JP pump is suitable for a wide range of water supplies and tasks around the home, garden and leisure, as well as agriculture, horticulture and to small service companies. When used in conjunction with a pressure control or reservoir the JP pump is ideal for water supply systems. Features and Benefits Self priming Stable operation even in the presence of air in the liquid Robust design which makes the pump also suitable for fixed installation The pump is directly coupled to a special fan-cooled asynchronous motor adapted to the pump performance Single-stage motors have a built-in thermal switch and require no additional motor protection Three-stage motors require external motor protection. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase
€155,00
