RIELLO START CONDENS 25 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP General characteristics Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 20 kW Heating rated heat output: 19.5 kW Sanitary nominal heat input: 25 kW Sanitary nominal thermal power: 25 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.2% Profit return 30% (47th return): 108.9% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 14.3 l/min Dimensions (hxwxd) mm 792 x 405 x 248 ; 30 Kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG Technical features START CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Combined models for indoor, outdoor, built-in, with stainless steel storage tank Start Condens is the new Riello condensing wall-mounted proposal for small and medium-sized domestic users. The new compact aluminum condensing exchanger guarantees efficiency and reduction of polluting emissions. It can also be installed outdoors in a partially protected place. It is available in version 25 (with 25 kW of DHW power and 20 kW in heating) and 29 (with 29 kW of DHW power and 25 kW in heating). Characteristics: Low consumption circulator (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at temperature, reducing waiting times during withdrawal (can be activated by the user) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Natural gas operation as standard with the possibility of conversion to LPG (G31) and propane air (accessories), this modification is the responsibility of the installer or the technical assistance service. Possibility of outdoor installation in partially protected places, using special accessory kits. Yield **** Low polluting emissions Aluminum condenser, with premix burner Combined models and heating only for indoors, outdoors in partially protected places ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of “ Energy related Products ” (products connected to the use of energy) and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design ("eco-design "). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players.   The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G.   A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range. In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO RESIDENCE IN CONDENS 32 KIS METHANE CONDENSING BOILER WITH FUME KIT + BUILT-IN UNIT - NEW ErP Technical features Product code: 20096732 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 30 kW Useful thermal power (sanitary): 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 104.7% Profit return 30% (47th return): 109.8% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 785 x 553 x 268 ; 43kg Built-in dimensions (hxlxp) mm 1223 x 654 x 286 ; 24kg Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE General characteristics RESIDENCE IN CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models For outdoor recessed installations Residence In Condens allows for the technological level and high performance of the Residence Condens indoor version to be concealed in the wall. The innovative Riello heat exchanger, completely made of seamless aluminum, is synonymous with efficiency and durability, resistant to system dirt, offers excellent head and high heat exchange. Thermoregulation is managed directly by the boiler board and via the external probe (accessory) it allows suitably adapting the temperature of the heating system to the external climatic conditions. Residence In Condens is available with powers from 25 to 32 kW. Characteristics: Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Antifreeze function that protects the heating and DHW circuits down to -5°C (external and built-in versions) with the possibility of extending the protection down to -15°C (optional) The remote control panel (optional) allows you to manage the boiler directly from inside the home Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO evoDENS HE 25S* CONDENSING BOILER COMPLETE WITH KIT FOR LPG METHANE FUME EXHAUST - NEW ErP;ÿSTAINLESS STEEL wall-mounted condensing boilerÿ Technical specifications Model:ÿevoDENS HE Product codeÿLPG: 103021021000 Product codeÿMETHANE: 103121029000 Technical features: Heating/sanitary nominal heat inputkW 20.0 / 26.0 Yield name 60ø/80øC * % 96.7 Yield min. 60ø/80øC * % 92.4 NOx class no. 6 Minimum / maximum heating temperature****øC 25 / 80 Minimum / maximum heating pressurebar 3.0 / 0.3 Capacity of the expansion vessel (total / useful) l 7.0 / 3.5 Maximum flow rate (T=25 K) / (T=35 K) l/min 14.4 / 10.3 Specific sanitary flow rate (T=30 K) ***** l/min 12.0 Voltage / Power at nominal heat input V~/ W 230/100 Power at rest (stand-by) W 5 Degrees of protection nø IPX5D Dimensions HxWxDÿmm 700x400x290; 32.7Kg Boiler water content l 2 Main features EvoDENS HE The new range of wall-mounted condensing boilers: excellent performance thanks to the new heat exchanger Evodens HEÿis the new SAVIO range ofÿwall-mounted condensing boilersÿ: excellent performance thanks to the new heat exchanger and ease of use thanks to the digital control panel with large displays. Available in versions for heating and domestic hot water production and for heating onlyÿEvodens HEÿpresents a complete range of powers, 25 and 35 kW combi models and 25 and 35 SV models, in the same extremely compact dimensions (700 x 400 x 290 mm).ÿ Evodens HEÿhas the strong point in the innovative heat exchanger designed to provide high yields that last in the digital control panel, designed to communicate with the user in an easy and comfortable way. Like the entire SAVIO condensing range, ÿEvodens HEÿallows you to obtain maximum savings from climatic thermoregulation, based on the system in which the boiler is installed. MAIN FEATURES: High yields (in compliance with yield directive 92/42ÿCEE and Legislative Decree 311/06) Sanitary comfort( EN 13203) Primary condensing exchanger in stainless steelÿwith aluminum linings to offer maximumÿresistance to corrosion Total premix burner, built in stainless steel (Class NOx 5) Modulation 1:10 Methane also LPG Sanitary plate heat exchanger in stainless steel 7 liter expansion tanks High efficiency PWM pump with low power consumption variable speed Maximum power adjustable according to the system Degrees of protection IPX5D Can be installed in a partially protected place Integration with Savio solar systems, using a solar kit Innovative digital control panel Digital pressure reading Arrangement for remote control of external probe Possibility of managing a zone valve by means of a remote control in the case of multi-zone systems. High circulation single coil primary exchangerÿSavi produces the new Steelcoil compound exchanger with a stainless steel spiral enclosed in an aluminum shell. Thanks to the large exchange surface of the coil, greater thermal efficiency is guaranteed with less loss of charge and easier cleaning. The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product which can be used on new systems but also on old systems in the case of renovations. Steelcoil integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the monspira. Does the absence of parallel circuits guarantee an easy cleaning operation? of the exchanger and the elimination of any air present in the system circuit. CONTROL PANEL Summer/winter/off selector Heating temperature regulator Sanitary temperature regulator Digital pressure reading Domestic hot water and heating temperature visualization from the display Display of fault diagnostics, fault history block status Refill ViewÿRecommended Refill Guide Display of months remaining until annual maintenance is due External temperature displayÿ(with external probe connected) andÿindication of external probeÿconnected and K value set Flame modulation display Visualization of SavioÿSOLCONTROL solar control unit connected to EVODENSÿHE, active solar pump and solar integration DHW comfort functionÿselectable by means of a dedicated keyÿand programmable Ingressdirectl the INFO menu dedicated to the user. Thermoregulation By connecting the external probe and the remote control (optional) directly to the boiler, climatic regulation can be used. EVODENS HE will adapt the water temperature of the system to the external climatic conditions, guaranteeing the achievement of the desired room temperature without waste and optimizing consumption. By using climatic regulation, the regulation efficiency also rises, giving greater value to your home. Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less

ATTENTION THIS PRODUCT IS MADE TO ORDER. SHIPPING TAKES PLACE WITHIN 10 WORKING DAYS FROM THE DATE OF PURCHASE RIELLO RESIDENCE EXTERNA CONDENS 32 KIS METHANE CONDENSING BOILER COMPLETE WITH FUME KIT -NEW ErP Technical features Product code: 20096735 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 30 kW Useful thermal power (sanitary): 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 104.7% Profit return 30% (47th return): 109.5% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 785 x 553 x 275 ; 46 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE RESIDENCE EXTERNAL CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models For outdoor installations Residence Externa Condens is specifically designed for outdoor installation and stands out for its extremely small dimensions. Equipped as standard with the exclusive Riello condensing exchanger, completely made of aluminum and without welding, synonymous with efficiency and durability, resistant to system dirt with high heads and excellent heat exchange. The climatic regulation is managed directly via the boiler board: this allows the temperature of the heating system to be suitably adapted to the external climatic conditions. Residence Externa Condens is controlled directly from inside the home thanks to the exclusive remote control supplied as standard. Residence Externa Condens is available with powers from 20 to 32 kW. Characteristics: Remote control panel supplied as standard Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) Antifreeze function that protects the heating and DHW circuits down to -5°C with the possibility of extending the protection down to -15°C (optional) "Winter with Pre-heating" function: allows the DHW exchanger to be maintained at temperature, reducing waiting times during withdrawal (instantaneous combined models) Possible "open-air" installation using the special waterproof kit (optional) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BIASI rinNOVA COND XE 35S CONDENSING BOILER COMPLETE WITH LPG LPG FUME EXHAUST KIT - NEW ErP Technical specifications: Energy label specifications according to the European ErPÿ directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XXL Characteristics of heating/sanitary exercises: Thermal powerÿuseful sanitaryÿ(80/60ø C)ÿkW (kcal/h)ÿ33.4 (28,724) Heating capacityÿuseful heatingÿ(80/60ø C)ÿkW (kcal/h)ÿ32.1 (27,606) Heat input(*)ÿnominalÿkW (kcal/h)ÿ34.0 (29,240) Heat inputÿminimumÿkW (kcal/h)ÿ8.5 (7,309) Sanitary flowÿt =25øKÿl/minÿ21.6 Dimensions (HxWxD) 700x400x290 mm Main features renew COND Xÿ RinNova Cond X The BIASI premixed condensing range completes: perfectÿfor underfloor systems for radiator systems, the compact condensing boiler that ensures high yields, low consumption and respect for the environment. Availableÿfor heating and domestic hot water production, in powers of 25 and 35 kW and forÿheating only in powers of 16, 25 and 35 kW. Characteristics: High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfortÿÿ(EN 13203) Primary and condensing exchanger in stainless steel with plastic linings to offer maximum resistance to corrosion Total premix burner, built in stainless steel (class NOx 5) Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Maximum power adjustable according to the needs of the system Degrees of protection IPX5D Installability in a partially protected place Integration with BIASI solar systems using a solar kit digital control panel with backlit display Digital pressure reading by pressure transducer Arrangement for external probe remote control Four-controllers Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital pressure reading DHW and heating temperature visualization from display Display of fault diagnostics, fault history block status View recommended fill View annual maintenance expiry The display operates according to the modes: INFO. Inf mode displays the following information: External temperature (in case of connected external probe) K value (in case of connected external probe) Sanitary / heating temperatures chosen by the user Smoke temperatures. 2. PROGRAMMING. The programming mode allows you to modify the boiler parameters. In chimney sweep mode it is possible to test the boiler and make adjustments to the gas valve. RinNova Cond XE: Adjustable maximum power The adjustable maximum useful heating power parameter meets the needs of modern construction without compromising comfort required in the production of domestic hot water. In fact, this function makes it possible to limit the maximum useful power in heating, independently of the useful domestic power. Hot water even with the sun RinNova Cond XE for heating and hot water production: the sanitary exchangerÿin stainless steel combined with the electronic management and low inertia of the primary exchangerÿdetermine excellent performance even in the production of domestic hot water.ÿFor the production of domestic hot water RinNova Cond XE can be combined with BIASI solar systems using specific solar kit (optional). The boiler cuts in only when necessary, making the most of solar energy and guaranteeing the comfort required by the user. Included in delivery: Boiler support bracket and paper template Boiler power cable Condensate collection siphon Quick instruction to the user. All ready for Energy Labeling What it is about: From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me tooÿ YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: energy label ; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices product datasheet ; technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations: ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IMMERGAS MAIOR NIKE 24 Kw METHANE OPEN CHAMBER GAS BOILER Technical features Energy class in heating: C; Sanitary energy class: B; Heating performance: Max nominal heat input (kcal/h) 25.9 (22,307) kW Nominal heat input min. in heating (kcal/h) 10.7 (9,185) kW Useful thermal power (min./max) (kcal/h) 9.4/23.5 (8.084/20.210) kW; Healthcare services: Nominal heat input min. in DHW (kcal/h) 8.1 (6,928) kW; Useful heat output min. in sanitary (kcal/h) 7.0 (6,020); Nominal heating expansion vessel capacity 10.0 (8.0) litres; Electrical protection degree IP X4D; Power supply: LPG. General characteristics The MAIOR NIKE boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit LCD display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Designed to meet all the needs of its customers, the Immergas meior Nike boiler respects the environment (ErP), as well as guaranteeing the functions that preserve the integrity of the generator over time, it also has the function of managing the systems with solar system, capable of delaying ignition to optimize the reading of the incoming water coming from the solar tank. This function is even more performing with the aid of the DHW inlet probe kit. Finally, to facilitate installation, it is made up of unchanged attachments to ensure that it is replaced with other instantaneous wall-hung models in the Immergas range. Dimensions (HxWxD): 785x440x340; Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

Overview BIASI PARVA RECUPERA E 24S LPG CONDENSING BOILER - NEW ErP 2015, WATERTIGHT CHAMBER COMPLETE WITH FUME EXHAUST KIT: PARVA Recupera E ErP condensing boiler with heat recovery unit. Technical specifications Model:ÿPARVA Recover E 24S Product code:ÿ10302.2011.3 Energy label specifications according to the European ErPÿ directive Class B heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Thermal input:ÿ25ÿkW Rated useful power: 24.3 kW Nominal load efficiency:ÿ97.2% Efficiency minimum load:ÿ95.1% Energy efficiency stars: (dir 92/42/EEC) **** Min/max heating temperature: 38/85ÿøC Capacity of the expansion vessel: 6 lt Sanitary flow rate t =25øK l/min: 13.9 l/min Degrees of protection for the electrical system:ÿIPX4D Extremely compact dimensions hxwxd: mmÿ803x400x350ÿ; 47.5kg LPG fuel supply Features list ErP wall-mounted boilers with recuperator Redeveloping an old thermal systemÿ Biasi has designed the ÿPARVA Recupera NOx EÿandÿPARVA Recupera Eÿboilers to replace traditional boilers in old systems. The PARVA Recupera boilers by Biasi are equipped with a corrosion-resistant aluminum alloy fume recovery unit which makes these boilers particularly solid. The recovery unit is made of aluminium, has a finned coil which determines a large exchange surface and is equipped with a device to ensure that the boiler discharges the condensate correctly. The recuperator is treated with a Teflon coating process to ensure maximum durability over time. Thanks to the large exchange surface, the recuperator allows the recovery of thermal energy which would otherwise be dispersed outside through the hot fumes produced by combustion. PARVA Recover E PARVA Recupera E is the condensing boiler designed for traditional systems and easily adaptable to new floor-based systems using MULTIZONE, a hot water distribution system for heating. PARVA It recovers the traditional boiler in the regulations but it has clearly higher efficiency than the traditional boilers at the same operating temperature. As a condensing boiler, PARVA Recupera allows you to take advantage of the tax deduction according to current legislation. Characteristics: High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06ÿ Primary laminated copper heat exchanger with large double circulation exchange surfaceÿ Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the waterÿ Sanitary plate heat exchanger in INOXÿ steel High efficiency pump with low energy consumptionÿ retractable control panel, with ergonomic knobs and backlit displayÿ Electronic board for:ÿ - Re-ignition frequency adjustmentÿ - Adjustable primary circuit thermal inertia disposalsÿ - Selection of circulator modeÿ - Circulator anti-seizeÿ - Antifreeze safetyÿ - Chimney sweep functionÿ Integrated automatic by-passÿ Immunity to radio interferenceÿ Sanitary flowstat magneticÿ Absolute heating pressure switchÿ Degrees of protection IPX4Dÿ Possibility of integrating PARVA Recupera E with Biasi solar systems using the optional solar kit. Fiscal detraction As a condensing boiler, PARVA Recupera E allows you to take advantage of the tax deduction according to current legislation.ÿÿ Heat recoveryÿ The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator made of aluminum has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly.ÿÿ Thermoregulation By connecting the external probe (optional) directly to the boiler, you can access the climatic adjustment function. The boiler is equipped with a complete set of curves which can be accessed by entering programming. By simply turning a knob you choose the curve, PARVA recovers and will automatically adapt its operation to the external climatic conditions.ÿÿ High circulation primary heat exchangerÿ It is the element that distinguishes the whole PARVA E Biasi range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system, facilitating the transmission of heat to the radiators.ÿ Save simplicity of use Parva Recupera retains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler resulting from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at operating temperatures typical of radiator systems, leads Parva Recupera to have higher yields than traditional boilers. Low complexity, high comfort Parva Recupera boilers, despite the high technical content, are still very simple to use. Theÿcontrol panelÿhas two knobs dedicated to regulating the temperature of the domestic hot water and the heating water, the key to reset the boiler after the lockout status, the new display to view the boiler operating status and make it easier for the user to understand and installer settings . Fault diagnostics allow immediate verification of correct operation. The manometer allows you to check the system pressure while the temperature is shown on the display. Everything is hidden under a door that defines the sober and linear aesthetics of Parva Recupera. Included in delivery Boiler support bracket and paper templateÿ Condensate collection trapÿ Quick instruction to the user.ÿ All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me too YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's liability The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Characteristics: Class A heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile: XL Heating / domestic hot water nominal heat input kW 20/28 Heating / domestic hot water reduced heat input kW 2.80 Supply voltage/frequency: 230/50 Volt/Hz NOx Class 5 Supply voltage / frequency Volt/Hz 230/50 Boiler dimensions (HxLxP) mm 780x400x365; 36 Gas version available: METHANE Warm-up exercise: Maximum pressure and temperatures bar / °C 3 / 90 Expansion vessel capacity 9 litres Healthcare exercise: Minimum / maximum pressure 0.2 - 6 bar Quantity of hot water with Δt =25° litres/min 16.1 Minimum domestic water flow rate litres/min 2 To view further technical information on the product CLICK HERE The new MySMART condensing boiler is designed following the ecodesign indications provided for by the European ErP Directive. MySMART has a higher power in DHW mode thus offering greater comfort. The boiler, an instantaneous combined model, offers as standard the new front access condensing exchanger with improved efficiency (94% seasonal efficiency) and the low consumption FLEX modulating circulator with modifiable head up to 7m. MySMART is compatible with the new Ø 50 mm flue with which it is possible to carry out ducting up to 7m. The BeSMART Comfort Control is inserted as standard with MySMART with the WiFi Box, the external probe, the flue splitter, the plumbing fittings cover, the template, the heating taps with filter, the brass plumbing fittings, the gas taps and sanitary. It forms a class A + system without the addition of options BeSMART WiFi Comfort control included as standard Available APPs for management from Smartphone and Tablet Very high modulation (up to 1:10) Flex low consumption circulator (EEI ≤ 0.20 ) with 6m head adjustable to 7m Possibility of ducting with the special flue in PP Ø 50 Standard ø 80 mm splitter General characteristics BeSMART the advanced comfort control Leaving for your home in the mountains? Or returning from a business trip? Through your Smartphone or Tablet, with the BeSMART App you can turn the boiler on and off, read the home and outside temperature and change the time programming of your heating system. The BeSMART WiFi Comfort Control Panel, standard in the MySMART boiler, is the remote boiler management device with chronothermostat functions. With the WiFi Box kit (series) it is possible to manage comfort even remotely with a Smartphone and Tablet. Simple and intuitive, it allows you to adjust the parameters and activate the many functions on the boiler. A large liquid crystal display shows all important information. Using the keys, the temperature of the heating water and domestic hot water is set easily and intuitively and the time programming is carried out. MySMART also features the Easy Climate function (thermoregulation with standard external probe). MySMART, the elegant The new MySMART boiler is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to easily select all the functions necessary for using and setting the boiler. OTHER CHARACTERISTICS: Telemanagement : Remotely, with BeSMART, you can turn the boiler on and off, change the temperatures, program the weekly chronothermostat, view the home temperature. Management with tablets and smartphones : Compatible with smartphones and tablets using the Android (≥ 3.0 ver.) or iOS system. Downloadable Apps: Available APPs compatible with Android (≥ ver. 3.0) and iOS systems for switching on/off and managing boilers/systems remotely via Smartphone and Tablet. WiFi : WiFi communication between the WiFi Box and the home ADSL WiFi modem router to connect to the internet. Possibility to connect to the optional WiFi modem kit for SIM CARD as an alternative to the ADSL modem. RF : RF (radio frequency) communication between the BeSMART Comfort Control and the WiFi Box; Possibility of connecting up to 8 BeSMART Comfort Controls in RF to manage up to 8 different zones/environments (wireless communication up to 40 m away). Weekly heating time programming : Heating time programming in 30 minute intervals and possibility to choose between different pre-set programs. Holiday function: For quick entry of the number of holiday days in which to operate the generator in order to have a reduced room temperature. The acronym ErP, an acronym for "Energy related Products", identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015, the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class. Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility of easily identifying the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with a nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Beretta's commitment is concrete and is directed towards an increasingly eco-sustainable future. This is why Beretta is already ErP-Ready today with solutions for any installation and comfort requirement linked to autonomous residential and centralized systems. A complete and constantly evolving catalog with many ErP-Ready proposals in the case of mere replacement, energy redevelopment, renovation or new construction. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED ASSISTANCE SERVICE IN ADVANCE Junkers Bosch CONDENS 5000 WR condensing boiler with shaped exhaust complete with flue kit - NEW GC5000 W 21/27 R Technical features Declared load profile XL Energy efficiency class A Water heating energy efficiency class A Rated thermal power Prated kW 20 Annual energy consumption QHE GJ 49 Seasonal space heating energy efficiency ηS % 94 Water heating energy efficiency ηwh % 85 Dimensions Length/Depth (cm): 43.8 Width (cm): 40 Height (cm): 86.7 Weight (kg): 36.7 Power (kW): 27 Condensed 5000 W The Condens 5000 WR boiler is the perfect solution for replacing boilers with shaped smoke outlets thanks to the adjustable smoke outlet system Characteristics Ideal for replacing boilers with shaped flue outlets Easy to install thanks to the smoke outlet integrated in the backrest Efficient, silent and environmentally friendly 3-star sanitary comfort according to European standards Ideal for replacement The Condens 5000 WR boiler is easy to install and the adjustable flue outlet for rear or side outlet makes it perfect for replacing systems with shaped flue outlets. Efficiency and silence while respecting the environment With only 45 dB(A) of sound power, the Condens 5000 WR boiler is extremely silent. The condensing technology also makes it possible to reduce consumption and CO2 emissions. Maximum sanitary comfort Sanitary comfort of the 3-star boiler: the maximum obtainable according to the European standard EN13203-1/2 Remote control Boiler connectivity via EasyControl CT200 thermostat or via the MB LAN2 module (accessory) which can be combined with the CR…, CW… thermoregulators Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview BAXI LUNA3 SILVER SPACE HT 240 CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT: Wall mounted gas condensing boilers for heating and DHW production; for outdoors. Technical specifications Domestic hot water/heating nominal heat input: 24.7 kW Domestic hot water/heating nominal heat output:ÿ24 kW Energy Efficiency(92/42/EEC): **** Average efficiency (DIN 4702-T8): 109.8%ÿ 30% yield: 107.6ÿ% Domestic hot water production T 25øC: 13.8ÿl/min Minimum domestic hot water flow rate: 2 l/minÿ Minimum operating temperature: -15°C Expansion/pre-charge capacity 8/0.5ÿl/bar Maximum length of the concentric 60/100 exhaust-intake tube: 10m Maximum length of the 80 split exhaust-intake pipe: 80 m NOx class (EN 483): 5 Degrees of protection IPX5D Rated Electric Power: 150W Dimensions (hxwxd): 830x550x250ÿmmÿ; 44 kgs Power supply: LPG Features list LUNA3 SILVER SPACE HT Wall-hung gas condensing boilers for heating and DHW production; for outdoors. Power range fromÿ24 kW Outdoor installation, minimum operating temperature: -15°C Controllremot with LCD display, with chronothermostat function for climate control unit, supplied as standard Arrangement for the management of an implantmist (high-low temperature) Automatic plant loading system Arrangement for combination with the integrated Baxi solar system Standard climate control (with optional external probe) Maximum protectionÿ Luna3 Silver Space HT boilers are certified with IPX5D degrees of protection which guarantees protection of the boiler's electrical components from water jets.ÿ Total gel devices Luna3 Silver Space HT boilers are particularly suitable for installation outside buildings as they have an anti-freeze function. heating and sanitary which allow the boiler to operate down to -15°C. When the temperature of the water in the circuits falls below 5°C, the sophisticated electronics of the boiler activates the anti-freeze function which automatically ignites the burner, avoiding water freezing phenomena. Special function The user can activate the SHOWER BUTTON directly from the control panel, thus momentarily varying the temperature of the domestic hot water, which after the interval will return to the usual value. Solar connection The ÿLuna3 Silver Space HT boilers are designed to be combined with the Baxi integrated solar system. The sophisticated electronics of ÿLuna3 Silver Space HT was designed to allow the boiler to be switched on only when the temperature of the water coming from the solar storage tank is reached ÿ lower than that requested. For installation, follow the warnings indicated in the instruction manual. External probe The ÿLuna3 Silver Space HT boilers are set up for climate control (external probe available as an option) to adapt theÿ system delivery temperature as a function of the external temperature. Series features: Hydraulic system: Electric three-way diverter valve Pre-mix burner in stainless steel Water/fumes exchanger in stainless steelÿwith external cladding in composite material Increased sanitary heat exchanger in stainless steelÿwhich allows the boiler to condense even inÿsanitary operation Modulating fan with electronic speed variation Automatic by-pass Circulation pump with adjustable speed, low consumption, built-in deaerator Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve 3 bar Thermoregulation system: Climatic adjustment as standardÿ(with external probe available as an option) Arrangement for connection to a zone system Heating programmer and ambient probeÿintegrated in the control panel Control system: Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switches which blocks the gas in case of water shortage NTC safety probe for fume overtemperature control Controlltemperature through NTC probes Total gel devices Electronic thermometer Heating circuit pressure gauge Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

ATTENTION CNG, LPG AND PROPANE AIR OPERATION WITHOUT NEED OF KIT. THE TRANSFORMATION TAKES PLACE THANKS TO THE COMBUSTION CONTROL BY SELECTING THE TYPE OF GAS FROM THE TECHNICAL MENU. WE INVITE YOU TO CONTACT OUR SWITCHBOARD FOR FURTHER INFORMATION Technical features Model : Alteas One Net 24 Product code: 3301058 ( Methane Code ) Sealed chamber Energy label specifications according to the European ErP directive Class A heating energy efficiency (A+ achieved thanks to thermoregulation) Sanitary energy efficiency: Class A Withdrawal Profile : XL Nominal thermal power kW 22 Annual energy consumption in heating 38 gj Annual electricity consumption 49 kWh Seasonal space heating energy efficiency % 94 Water heating energy efficiency % 86 Sound power level inside 49 dB DHW flow rate ∆T 25 °C (l/min) 14.4 Dimensions 24 kW mm (HxWxD) 745 x 400 x 315 Indoor installation and partially protected places Power supply: methane Functionality: Connectivity integrated in the boiler HI-Comfort functions AUTO, Comfort, CARE Thermoregulation including CUBE thermostat + external probe Large display, touch interface XtraTech™ stainless steel heat exchanger ONE Series, the new generation of condensing boilers Serie ONE is the new generation of Ariston condensing boilers, studied down to the smallest detail to guarantee maximum performance for a long time New XTRATECH™ exchanger: Maximum quality XtraTech™ is the new exclusive* Ariston stainless steel heat exchanger , the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations. Excellent results, over time Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+ ! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort: Innovative functions to meet your needs ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance ALTEAS ONE NET Top of the range condensing boiler, Italian design and integrated connectivity It represents the perfect combination of excellent performance and innovative design. The front panel in tempered glass, the HI-tech display and integrated connectivity make Alteas the perfect boiler for exclusive furnishing solutions. The efficiency of the boiler combines with the advantages of the Ariston NET service to control your system remotely, keep consumption under control and have peace of mind thanks to a technician who is always by your side. All via a simple free smartphone app! New XtraTech™ exchanger in exclusive* Ariston stainless steel, with high head Exchanger passage sections +142% compared to the previous version Tempered and scratch resistant glass panel Large display, touch interface Ignition system, electronic combustion control Gas transformation from the technical menu Class A+ in heating, thanks to the Cube thermostat and external probe included as standard Modulation ratio 1:10 Ariston NET connectivity included in the boiler BusBridgeNet® communication protocol AUTO function, Comfort New CARE function, automatic reminder of routine maintenance Internal sound absorbing panels Installation in partially protected places Fumes discharge 80, 60, 50 m Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB IN THE ABSENCE OF THIS PRODUCT, THE NEW MODEL WILL BE SUPPLIED: VICTRIX ZEUS 25! IMMERGAS VICTRIX ZEUS 26 KW METHANE CONDENSING BOILER WITH BOILER - COMPLETE WITH FUME EXHAUST KIT - ERP Technical features Model: Wall mounted condensing boiler with 45 liter Boiler; Energy class in heating: A; Sanitary energy class: A; Sanitary load profile: XL; Heating power: 23.6 kW; DHW power: 26.0 kW; Hot water production (∆t 30 °C) l/min: 15.6 Nominal Current: 0.78A; Electrical insulation degree IP X5D; Heating performance: Nominal system expansion vessel capacity (min./max.): 8.0/5.8 L; Head available with flow rate 1000 l/h kPa (m wc) 31.0 (3.16); Healthcare services: Useful thermal power for hot water production (kcal/h) 32.0 (27,520) kW; DHW temperature °C 30 - 60: DHW pressure (min./max) 0.3/10 bar: Min. domestic hot water withdrawal 1.5 litres/min; Power supply: METHANE Benefits and functions: It is possible to take advantage of the tax deductions in force; Low consumption, and can be combined as an optional with thermoregulators, which improve comfort and increase energy savings; 45 l kettle; Eco-compatible technology: in compliance with the ErP and ELD European Directives, it allows to achieve high energy efficiency classes in heating and hot water production; Ecological class 5: reduced emissions of nitrogen oxides. General characteristics Immergas boiler, easy to install in any environment and compatible with existing fittings, designed to respect the environment while enjoying maximum comfort with low energy consumption given its low consumption circulator. Equipped with a 45 liter stainless steel boiler which allows excellent thermoregulation, guaranteeing very high performance in terms of comfort. The Zeus boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Dimensions (HxWxD): 890x580x380mm; Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less