General characteristics Energy label specifications according to the European ErP directive   Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 28/3.0 Max/min heating thermal power (80°C-60°C) kW 27.1/2.9 Efficiency at nominal heat input (60/80°C) % 97.7 Efficiency at nominal heat input (30/50°C) % 106.2 Efficiency at 30% at 30°C % 108.8 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 14.1 Quantity of hot water ∆T=25°C litres/min 16.8 Quantity of hot water ∆T=35°C litres/min 12 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 81 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/400/385 CNG or LPG power supply Kit for conversion from methane to propane supplied Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water.   Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies...  Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers.  EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the Energy Certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy.   Genus Premium Evo The Genus Premium Evo wall-mounted boiler is the maximum expression of the Ariston range. Thanks to the condensing technology, by recovering the energy of the exhaust fumes, it generates an increase in the calorific value which makes it possible to eliminate waste (of energy) and to obtain higher thermal efficiency than conventional boilers. Genus Premium Evo offers even greater performance thanks to the innovative technology that allows it to self-regulate according to variations in the external and internal temperature of the room, allowing energy savings of up to 35% compared to an older generation boiler. It is available in the heating and domestic hot water production version in 3 powers: 24-30-35 kW (sealed chamber).   Characteristics: Can be installed in partially protected places Large backlit dot matrix screen Continuous modulation high-efficiency circulator: for optimizing consumption and maximizing performance. Modulation ratio 1:10 - Automatic power regulation according to the heating request. Acoustic comfort guaranteed by the lower number of boiler on and off cycles, new silencer and sound-absorbing panels Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Isothermal primary heat exchanger in stainless steel Increased sanitary exchanger Cold water inlet and heating return filters  Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons  Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Clas Premium Evo thanks also to the high modulation ratio of 1:10, the continuously modulating pump and the presence of side sound-absorbing panels.  High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology   Ecodesign directive: from 2015 only new condensing boilers    After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling?       Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹.   How to read energy labels    There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

OFFER VALID UNTIL STOCKS LAST THE BOILER IS BORN WITH METHANE. THEREFORE, THE STANDARD TRANSFORMATION KIT WILL BE SUPPLIED. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : Class One 24 Product code: 3301021 Power supply: methane Wi-Fi Optional Energy efficiency Energy efficiency class in heating: A Sanitary energy efficiency class: A Withdrawal profile : XL Combustion Nominal heat input in heating : 3.7 ~ 22.0 kW Nominal heat input in DHW : 3.7 ~ 26.0 kW Useful thermal power in heating: 3.4 ~ 21.4 kW Returns Efficiency at nominal heat input 60°/80°C : 97.5% Efficiency at nominal heat input 30°/50°C: 107.3% Return at 30% / 30°C : 109.8% Performance High temperature heating temperatures : 82° ~ 35° C Low temperature heating temperatures : 45° ~ 20° C DHW temperature : 60° ~ 36° C Quantity of hot water at 25°: 14.5 l/min Quantity of hot water at 35°: 10.4 l/min Minimum operating temperature : >0° C Minimum operating temperature with antifreeze kit: -5° C Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Absorbed electrical power: 77.0 W Degree of protection : X5D IP Dimensions and weight Dimensions (WxHxD): 400x745x315 mm Wall mounted condensing boiler Ariston CLAS ONE Ariston excellence guaranteed for 10 years thanks to the Protezione 10 total assistance programme. Latest generation condensing boiler set up for Wi-Fi connection with the CUBE S NET thermostat Prepared for Ariston NET With Ariston NET you have comfort at your fingertips. Remote control, consumption reports and online technical support, all in a free smartphone App Protection 10 The excellence of Series ONE is guaranteed for 10 years with the total protection 10 assistance program Small size Small footprint for easy installation New PER4MANCE system 4 technologies for exclusive performance New XtraTech TM heat exchanger, maximum quality. Absolute efficiency, energy class A+ Always connected with Ariston NET Full control, total comfort Heating with maximum duration over time with the XtraTech heat exchanger The new patented ExtraTech heat exchanger is the heart of the ONE condensing technology for heating, designed to guarantee performance with maximum durability over time Absolute efficiency, energy class A+ with Ignition System for improved functionality The ONE condensing technology and the thermoregulation accessories improve efficiency and performance, reaching up to energy class A+. Alteas ONE and Genus ONE are also equipped with the innovative Ignition System with electronic combustion control and gas adaptability. The system is able to automatically identify the characteristics of the gas, providing constant heating performance, advanced control and safety in all conditions Total Comfort Complete control is ensured every day with the thermo functions A unique set of innovative smart functions for a fast and stable heating temperature and easy customization able to satisfy every need Always connected with Ariston NET With Ariston NET it is possible to set, modify and control the heating, cooling and hot water temperature at any time, from your smartphone or PC, wherever you are Ariston quality forever at your home 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability A masterpiece of Italian style The improved design of the ONE Series is based on innovative lines, new materials and technological user interfaces for an even more comfortable experience. The touch screen display is a solution that allows easy management of the temperature, while the compact structure has been redesigned with internal components and a layout designed for easy access even with reduced dimensions. With the front panel in tempered glass, scratch resistant and easy to clean, Alteas ONE is made to withstand high temperatures and to always be super safe. Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview BIASI INOVIA COND E 35S LPG CONDENSING BOILER - NEW ErP, SEALED CHAMBER COMPLETE WITH FUME EXHAUST KIT: Wall mounted condensing boilers. The premixed range is simple on the outside and technological on the inside. The sites displaying the Biasi web sales authorized brand have been authorized by BSG Caldaie a Gas SpA for the sale of Biasi products. These companies therefore release the conventional guarantee. Technical specifications o Model: Inovia Cond E 35S Energy label specifications according to the European ErP directive o Class A heating energy efficiency o Sanitary energy efficiency Class A o Withdrawal profile: XXL Characteristics of heating/DHW operation: o DHW useful thermal power: 33.4 kW o Useful thermal power for heating: 29.5 kW o Nominal kW heat input(*): 34 kW o Efficiency at 100% load: 107.1% o Sanitary flow rate t =25°K l/min: 21.6 l/min o High yields (in compliance with yield directive 92/42 CEE and Legislative Decree 311/06) o Sanitary comfort (EN 13203) o Total premix burner, built in stainless steel (Class NOx 5) o Sanitary plate heat exchanger in stainless steel o High efficiency pump with low energy consumption o IPX5D degree of protection o Dimensions hxwxd: mm 700 x 400 x 290; 32kg o LPG power supply Main features Inovia Cond E Premixed condensing boilers Inovia Cond E represents the new premixed BIASI condensing boiler. Inovia Cond E is equipped with innovative aesthetics and a new interface that is immediate and easy to use, it is equipped with new functions that make it an integral part of a system and which facilitate its installation and maintenance. Inovia Cond E offers all the advantages of condensing technology: great performance, high efficiency, energy saving and respect for the environment thanks to reduced polluting emissions such as NOx and CO. Installed in low temperature systems, they allow savings of up to 30%. Characteristics: o • High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) or • Sanitary comfort (EN 13203) o • Primary condensing exchanger in stainless steel with plastic coating to offer maximum resistance to corrosion o • Total premix burner, built in stainless steel (Class NOx 5) or • Sanitary plate heat exchanger in stainless steel or • High efficiency pump with low energy consumption or • IPX5D degree of protection or • Can be installed in a partially protected place or • Integration with BIASI solar systems, using a solar kit o • Innovative digital control panel with graphic interface and keys or • Digital pressure reading by pressure transducer or • Arrangement for remote control and external probe or • Possibility? to manage a zone valve via remote control in the case of multi-zone systems. Control panel: o Summer/winter/off selector o Heating temperature regulator o DHW temperature regulator o Digital pressure reading o Domestic hot water and heating temperature visualization from the display o Visualization of fault diagnostics, block status and fault history o Recommended filling view and filling guide o View months left until annual maintenance is due o External temperature display (with external probe connected) and signaling of external probe connected and K value set o Display of flame modulation o Visualization of the BIASI SOLCONTROL solar control unit connected to Inovia Cond E, active solar pump and solar integration o DHW comfort function selectable by means of a dedicated and programmable key o Direct access to the INFO menu dedicated to the user. Fiscal detraction As a condensing boiler, Inovia Cond E allows you to take advantage of the tax deduction according to current legislation. d Thermoregulation By connecting the external probe (optional) directly to the boiler, climatic regulation can be used. Inovia Cond E will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption. The boiler is equipped with a complete set of curves which can be accessed by entering programming. The curve is simply chosen from the control panel. Solar management Inovia Cond E integrates solar management directly within the product. Thanks to the integrated solar management it is possible to connect the SOLCONTROL control unit and view the status of the pump and the relative solar integration. Zone management Inovia Cond E features the zone management card as standard which allows you to manage a zone valve using the BIASI remote control. In the case of a system with several high temperature zones, one zone can be managed by remote control and the other zones can be managed by chronothermostats. This allows you to select two thermoregulation curves, one in the boiler and the other in the remote control. All the zones controlled by chronothermostats will be managed by the thermoregulation curve set in the boiler, the zone controlled by the remote control will be managed by the thermoregulation curve set therein. In the case of multi-zone systems at high and low temperatures, it is recommended to use the BIASI MULTIzone system manager. All ready for Energy Labeling What is it about? From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the Eco-Design Directive (ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: or generators with a capacity of less than 400 kW or water heaters with a capacity of less than 400 kW, or kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows them to compare the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. Is it about me too? YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its devices or systems with the following documentation: o product energy label; o product data sheet; o system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices; o technical data sheet of the system with the parts relating to the product or the system already completed. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device and/or system to the public. Therefore even professionals such as plumbers, installers or planners can fall into this category. Everyone is required to ensure that: o all appliances and/or systems are equipped with the respective labels and make sure that they are clearly visible; o all devices and/or systems are always accompanied by the mandatory technical data sheets; o any type of advertising, promotional or technical material in which energy data or price indications are shown, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of device, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the final customer can make his choice in the most informed way possible. SYSTEM LABEL In addition to the product label, the system label is also provided if a series of matched appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO RESIDENCE CONDENS 32 KIS METHANE CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP Technical features Product code: 20096588 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 30 kW Sanitary nominal heat input: 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.7% Profit return 30% (47th return): 109.8% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Dimensions (hxlxp) mm 845 x 450 x 358 ; 42 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE General characteristics RESIDENCE CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models Residence Condens is the Riello wall-mounted condensing boiler for medium-sized users. The new primary heat exchanger completely made of aluminum with front access to the combustion chamber ensures better efficiency and durability. It is available with powers from 20 to 32 kW. Characteristics: Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview BERETTA METEO 28 CAI AG LPG BOILER - NEW ErP 2015 Cod. 20101259, OPEN ROOM WITH NATURAL DRAFT: CAI boilers specific for outdoor use, ErP version, equipped with low consumption circulator (EEI0,20). Technical specifications Product code: 20101259 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitaryware energy efficiencyprofilXL Class B Characteristics of heating/sanitary exercises: Heating/DHW nominal heat output: 28 kW Quantity of hot water with t=25øC: 16 l/min Dimensions (hxwxd) mmÿ760 x 553ÿx 240 LPG fuel supply Legend:ÿ C (heating + sanitary water),ÿ A (Open Room) I (electronic ignition, controls ionization). AGÿAntifreeze fine series -15øC Features list ErP WEATHER ÿMeteoÿ is a complete range of specific boilers for outdoor use. The high technological contents enhance the specific characteristics to the maximum: dimensions, standard remote control panel, resistance to external agents, innovative performance. The quality of the materials and the innovative design of the shell add elegance to these extremely small and high performance boilers. Extremely reliable and simple to use, the boilers in the Metesonnate range are specifically designed for outdoor installations. The exclusive shell structure, the IPX4D electrical protection and the materials used for the coat provide maximum protection from external agents. The streamlined, modern aesthetic allows water to roll off. Installation is facilitated by reduced dimensions and supplied equipment. Designed for installations on balconies, Meteo, with a depth of only 24 cm, is the ideal answer to space problems; equipped as standard with fittings for connection to the system, gas taps and sanitary fixtures with positioning template. The remote control panel, supplied as standard, allows total control of the boiler from inside the home. The main functions are simple and immediate, with many other settingsÿcustomizable by the user. The remote control panel also functions as a chronothermostat weekly and prearranged for climate control via an external probe (optional). Characteristics: CAI boilers, ErP version, equipped with low consumption circulator (EEI0,20)ÿadjustable up to 7m headÿ MIX combustion (Air/Gas): constant performance (mod. CSI)ÿ Built with specific materials for outdoor useÿ Remote control panel REC 05ÿ as standard Exhaust adapter ÷ 60 with standard air intake (mod. CSI)ÿ Standard antigelfine -15øCÿ Electrical protection degrees IPX4Dÿ Arrangement for climatic thermoregulationÿ Plumbing fittings, gas taps and sanitary fittingsÿ For gas conversion, contact authorized Beretta Technical Assistance Centres Beretta or ERP. The concrete commitment to a sustainable future The acronym ÿErP, acronym of Energy related Products?ÿ (Products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015, the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU. The regulation provides that all products intended for heating and the production of domestic hot water with a lower rated thermal power equal to 70 kW can be placed on the market with an ÿenergy labelÿthat highlights theÿefficiency class*. Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility of identifying it facilitates the level of efficiency of a product by being able to carry out a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data reported for climatic bands. In addition to the product labels, the European regulation has provided for the creation of a "system label" in the case of manufacturing plants with various appliances, components and related controls. This second type of labelling, thanks to the virtuous synergy between the various elements, will make it possible to create systems capable of achieving levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to less than 400kW, will prevent inefficient products from being placed on the market. Also for DHW tanks there will be an obligation to respect minimum heat loss limits. For primary water tanks, these will be subject to compliance with an energy classification based on heat loss. For sanitary accumulations, up to 500 liters there will be the obligation of labeling, from 500 to 2000 liters they will be bound to respect the energy classification. For heat pumps for heating and for mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. In order to be placed on the market, gas-fired water heaters with solar heat pumps, in addition to energy labelling, will also have to comply with a series of requirements in terms of efficiency. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Overview BERETTA METEO GREEN HE 35ÿCSI AG LPG BOILER Cod. 20023984 - NEW ErP 2016 - COMPLETE WITH FUME EXHAUST KIT:ÿCondensing boilers designed to offer high energy efficiency. Technical specifications Code:ÿ20023984 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitaryware energy efficiencyprofilXL Class A Characteristics of heating/sanitary exercises: Nominal heat input: 34.60 kW Nominal thermal power: 33.74 kW Classification European Directive EEC 92/42: **** Efficiency at rated power: 97.3% Reduced Load Return(30%): 108% Total electric power: 116W Quantity of hot water with t=25øC: 19.8 l/min Dimensions (hxwxd) mm 890x553x275; 48kg Standard antigelfin -15øC StandardÿIncorporated antifreeze system (SAI) LPG power supply Legend:ÿ HE (Hi Efficiency) C (heating + sanitary water) S (Sealed chamber)ÿ I (electronic ignition, check ionization) AG (antigel(-15øC).ÿ Features list MeteGreen HE (Hi Efficiency) Beretta boilers offer reliability and excellent technology, such that they can be used in solar thermal systems in systems with the most recent and innovative technologies. Beretta presents ÿMeteGreen he, the new range ofÿexternal to built-in condensing boilersdesignedÿto offer high energy efficiency. In fact, the boiler is equipped with a wide modulation range (1:10),ÿwith range rated approval, with a low consumption circulator (class A) with variable speed and all the advantages of the Meteo range. Condensing exchanger:ÿ Designed to provide high performance in compliance with the strictest European directives in terms of energy efficiency and low emissions. The innovativeÿexchangerÿcondenser and the production processÿallowed Beretta toÿfiling a patentÿapplicationÿEurope(Patent Pending).ÿThe exchanger is made of seamlessÿaluminium tube without welding.ÿThe high thermal conductivityÿof aluminum allows more uniform distribution of the temperature so as not to create overheating points benefit from a longer life over time of the exchanger.ÿFurthermore, aluminumoffers highÿresistance to corrosion.ÿThe tubunic architecture (seriesÿcircuits) allows to obtain a largeÿsection for the passage of waterÿin the exchanger with the advantageÿof having low head losses ofÿpreventing both limescaleÿand impurity depositsÿ The innovative aluminum condensing exchanger allows a good part of the heat from the fumes to be recovered, reducing losses to the chimney, and a good part of the latent heat from the condensation of the water vapor present in the fumes, reaching an energy yield value of four stars (according to the European Directive EEC 92/42). The exchanger is made of single aluminum tube without welding. Modulation 1:10 The range offers a wide range of modulation to respond to real energy needs, while simultaneously offering a high reduction in consumption. Beretta implements this system using a totally pneumatic model, therefore safe and reliable. The electronics in fact act only on the number of revolutions of the fan (incoming air flow rate) without intervening on the injection of the quantity of gas which is automatically sucked in. Beretta therefore introduces a new double distribution mixer: a mechanical damper with a catch that opens and closes a part of the venturi section in a way to divide the modulation range in two stages (smaller section with low airflows larger section with high airflows). Beretta has also developed a specific air intake silencer to reduce any resonances generated by the new mixer. Low consumption modulating circulator (Class A) It reduces electrical consumption by 60%, thanks also to self-adaptation in proportion to the power supplied in constant T operation. Thanks to the new technology adopted, the electric motor of the circulator offers an Energy Efficiency Index EEI<0.23, which means considerably reduced electricity consumption and already in line with the demands for energy savings. The new low-consumption modulating circulator (class A) offers a technologically advanced control that allows a high reduction in consumption thanks also to the modulation in a wide range of flow rates. Comfort Technological innovation combined with advanced electronicsÿmake it possible to obtain o Three starso in sanitary comfort:ÿthe unexpected standard from Pr EN 13203. Smart management The electronic panel is the boiler management brain. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. A large liquid crystal display shows all the important information. By turning the knobs, you can easily and intuitively set the temperature of the heating water and the domestic hot water. simply pressing a key allows you to choose the season. And when the boiler asks for it, pressing a key activates the Easy Filling function. The panel integrates the Climaÿ function Easy: thermoregulation and external probe as standard. Characteristics: Modulation 1:10 Low consumption modulating circulator (Class A): self-adaptation in proportion to the power supplied constant DELTA T operation, (EEI<0.23) RANGE RATED certification which allows you to adjust the thermal capacity of the boiler to the actual needs of the system Performance 4 STARS according to European Directive EEC 92/42 Rendimental 100% Pn > 93+2 log Pn according to Legislative Decree 311/06 Low polluting emissions: class 5 according to UNI EN 483 Patented condensing exchanger (Patent Pending) in high flow rate aluminium Sanitary comfort 3 STARS: the maximum unexpected by Pr EN 13203 Thermoregulation with standard external probe Remote control panel REC 07 as standard Standard gelfin protection -15øC (mod. AG) IPX5D electrical protection degrees For gas transformation, contact the Assistance Centres Authorized Beretta technique Beretta or ERP. The concrete commitment to a sustainable future The acronym ÿErP, acronym of Energy related Products?ÿ (Products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015, the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU. The regulation provides that all products intended for heating and the production of domestic hot water with a lower rated thermal power equal to 70 kW can be placed on the market with an ÿenergy labelÿthat highlights theÿefficiency class*. Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility of identifying it facilitates the level of efficiency of a product by being able to carry out a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data reported for climatic bands. In addition to the product labels, the European regulation has provided for the creation of a "system label" in the case of manufacturing plants with various appliances, components and related controls. This second type of labelling, thanks to the virtuous synergy between the various elements, will make it possible to create systems capable of achieving levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to less than 400kW, will prevent inefficient products from being placed on the market. Also for DHW tanks there will be an obligation to comply with minimum heat loss limits. For primary water tanks, these will be subject to compliance with an energy classification based on heat loss. For sanitary accumulations, up to 500 liters there will be the obligation of labeling, from 500 to 2000 liters they will be bound to respect the energy classification. For heat pumps for heating and for mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. In order to be placed on the market, gas-fired water heaters with solar heat pumps, in addition to energy labelling, will also have to comply with a series of requirements in terms of efficiency. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: PRODUCT ARRIVES IN MID-FEBRUARY ARISTON EGIS PREMIUM EVO EXT 30 EU CONDENSING COMPLETE WITH METHANE FUME KIT - ErP Technical features Product code: 3300764 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 29/6.0 Max/min heating thermal power (80°C-60°C) kW 28.4/5.8 Efficiency at nominal heat input (60/80°C) % 97.8 Efficiency at nominal heat input (30/50°C) % 104.0 Efficiency at 30% at 30°C % 108.0 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 25/45 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 13.2 Quantity of hot water ∆T=25°C litres/min 16.3 Quantity of hot water ∆T=35°C litres/min 11.6 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 82 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/505/240 Extremely small dimensions to adapt to any space problem. METHANE power supply Standard: Sensys system manager with integrated time programming General characteristics Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the Energy Certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy. Egis Premium Evo EXT EGIS Premium Evo EXT is the wall-mounted condensing boiler designed for outdoor installation. Thanks to its small size and low weight, installation is extremely simple. This without giving up the safety that distinguishes Ariston, i.e. exceptional resistance to cold (up to -15°C) and electrical protection from water and dust that reaches the highest levels (IPX5D classification). Simplicity and with reduced consumption thanks to the 1:4 modulation ratio and the high-efficiency circulator with continuous modulation. Operation only with methane gas. Characteristics: Wall mounted condensing boiler for outdoors with auto function Sensys system manager with integrated time programming Continuous modulation high efficiency circulator Modulation ratio 1:4 Electro-galvanized casing for outdoors Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort External probe integrated in the boiler Anti-freeze, anti-limescale and anti-blocking circulator protection Aluminum isothermal primary exchanger Cold water inlet and heating return filters 60mm split exhaust Operation only with methane gas Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo EXT thanks also to the high modulation ratio 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview RIELLO FAMILY IN CONDENS 3.0 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT + BUILT-IN UNIT - NEW ErP 2015: Family Condens is a technologically advanced wall-mounted built-in boiler that allows you to have the special Family functions in the concealed built-in unit. Technical specifications Product code:ÿ20102941 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitaryware energy efficiencyprofilXL Class A Characteristics of heating/sanitary exercises: Firebox thermal power (heating)ÿmin-max: 3.2ú25ÿkW Useful thermal power (sanitary) min-max: 3.2ú30ÿkW Energy efficiency(92/42/CEE)ÿ**** Efficiency at Pn* (50øC-30øC): 106.8% Profitability 30% (47ø return): 109.9% Sealed chamber, forced drafts Quantity of hot water at t 25°C: 17.2 l/min Minimum domestic water flow rate: 2ÿl/min Dimensions (hxwxd) mm 797 x 553 x 268ÿ; 42 kgs Built-in dimensions (hxlxp) mm 1223 x 654 x 281; 21kg Electrical protection degrees: IP X5D NOx class: 5 Power supply: LPGÿ Complete with built-in unit code ÿ20082310 Features list FAMILY IN CONDENS Efficiency****ÿ Low polluting emissionsÿ Aluminum condenser, with premix burnerÿ Models for combined instantaneous and accumulation heating For built-in installations Family In Condens a built-in wall mounted boiler that allows you to have the special Family functions in the concealed built-in. The new primary heat exchanger completely made of aluminum with frontal accessibility to the combustion chamber guarantees better efficiency and duration. It is available with powers from 3.2 to 30 kW. Features:ÿ Modulation ratio 1:10 (minimum power 3.2 kW) which allows the boiler to respond to all heat requestsÿ Modulating circulator, low consumption(IEE0,20)ÿ 3 Stars in sanitary comfort according to EN 13203ÿ Family Remote Control, supplied as standard, allows management of all boiler functions directly from inside the homeÿ Antigelfine -15øCÿ Remote alarm system which allows remote signaling of the boiler lockout statusÿ Special Family functions: TastBenessere, TastMemory, Touch&Go function Smart Fillsÿ Standard external probe. ÿTheÿFAMILY Remote Control kitÿ (remote control panel) is the instrument that allows you to manage the boiler remotely. The panel controls the boiler, storage tank and room temperatures, monitors and supervises the operating regimes, activation times and signals any anomalies. The remote control panel can be configured as: Chronothermostatÿ (factory con guration): it will operate according to the standard heating program according to the personalized one. In this con guration the control panel tries to keep the room at two temperature levels (comfort and reduced), switching from one to the other at times established by the user. Thermostat: the heating is activated when the temperature detected by the room probe (contained in the control panel) is lower than the one set regardless of the memorized heating programme. ErP: Energy related Products ErP the acronym for Energy related Products? (products connected to the use of energy) and the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design (or eco-design?). The scope of action of this European Directive is extremely broad since up to now it has affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 they will also apply to heating products and the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community is necessary to allow the full transposition of the contents by companies and market players. The regulations issued require that all products intended for heating and/for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an ÿenergy labelÿ that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the introduction of the product from the factories to the market. All the products previously introduced, for example present near distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product, to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as well as those on air conditioners, the efficiency data reported for the average climatic zone. In addition to product energy labels, European regulations have also provided for the creation of a "system label" in the case of building a plant in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will allow the creation of systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/operates the system (sellers-installers); but this faculty is also granted to builders. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Overview SAVIO alDENS 35* CONDENSING BOILER COMPLETE WITH LPG METHANE FUME KIT ideal for radiator systems - NEW ErP Technical specifications Model:ÿALDENS HE Technical data according to ErP directives Energy efficiency class in heating: A Sanitary energy efficiency class: A Load profiles: XLÿ Technical features: Minimum/Nominal useful power kWÿ4.3 ú 32.0 Minimum heat input with Methane/ Propaneÿ4,4 / 5,6 Efficiency class:ÿ Efficiency at nominal load in CONDENSATION % 102.3 Profitability at 30% of load% 98.1 NOx class 5 Operating temperature in heating min./maxøC 30 - 85 Adjustable temperature in sanitarywareøC 38 ú 60 DHW production mixed with t 25 l/min 18.3 Supply voltageÿV-Hz 230/50 Degrees of protection IP X5D Dimensions HxWxD mm 700x420x345; 36.5Kg Main features ALDENS ALDENS the new SAVIO range of condensing wall mounted boilers: excellent performance thanks to the aluminum heat exchanger and ease of use thanks to the control panel with knobs and display. Available in the combi version which combines the heating function and the production of domestic hot water. ALDENS presents a complete range of powers, 24 and 35 kW combi in the same extremely compact dimensions (700 x 420 x 345 mm). ALDENS has the strong point in the innovative primary heat exchanger in Al/Si/Mg with low water content designed to provide high yields that last over time. The digital display communicates the boiler operating parameters to the user in an easy and convenient way. Like the entire condensing range, SAVIO ALDENS allows you to make the most of savings from climatic thermoregulation, based on the system in which the boiler is installed. Main features: Outstanding fine 1:8 modulation ratio Efficiency>107% (ex dir. CE 92/42) Primary heat exchanger in ultra-flat Al/Si/Mg Electronics with HWS or Hot Water Speed ​​function? Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of fine hot water 13.3 l/min t 25 with special 12-plate (mod. 24 kW) and 16-plate (mod. 35 kW) exchanger in stainless steel Maintenance or Pit Stop? simple and intuitive control panel High efficiency modulating circulator (in line with ErP Dir. 2015) Sanitary exchanger Sanitary comfort ensured by the suitably sized plate exchanger to guarantee the best performance in terms of domestic hot water, reducing the waiting time and guaranteeing temperature stability. Modulating circulator with deaerator It represents the state of the art in the standard of high efficiency. In line with the ErP directive of 2015, with less than 1 W of consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed on the delivery/return automatically doses the boiler power to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. Exclusive Ai/Si/Mg heat exchanger It is made in a special Aluminum/Silicon/Magnesium alloy which ensures its efficiency and resistance over time. Thanks to the configuration of internal heat exchangers, efficiencies higher than 107% are achieved in the condensing regime, which means great economic savings and very low environmental impact for the user. The 35 kW version suitably increased. Plus Manage 2 zones with 2 thermostats:ÿALDENS versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 different temperature heating zones (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats.ÿ Anti-overheating post-circulation:ÿFor 15 seconds, it maintains the thermal balance between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of.ÿ Sliding temperature operations:ÿFor maximum running economy.ÿ Antifreeze protection:ÿIt intervenes at 5°C and is activated in both domestic hot water and heating, bringing the temperature in the boiler to 15°C. The risk is avoided that ALDENS may freeze if low temperatures persist in the room where it is installed. If there is a lack of gas, the block signal will appear on the display.ÿ Pump anti-blocking: blocking of the pump following long stops is avoided thanks to an automatic 5-second pulse that the electronics sends to the motor every 24 hours of stop The multifunction LCD display, with timed backlighting, allows: Reading of the heating and sanitary temperatures Display of lockout due to lack of flame Error code display Malfunction signaling Operating/stand-by status Burner operating status Diagnostics with signaling of 11 anomalies Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less

Riello condensing boiler Family Condens 25 KIS complete with methane or LPG fume exhaust kit class A - NEW Energy class in heating A Energy class in sanitary A XL load profile Heating Nominal heat input kW 20.0 Nominal thermal power (80°-60°) kW 19.5 Expansion vessel L 10 Sanitary Nominal heat input kW 25 Nominal thermal power** kW 26.3 Maximum pressure bar 8 Hot water production with T+25 °C l/min 15.1 NOx class 6 Dimensions Dimensions (H***xLxP) mm 822x470x275; 35 kgs Methane or LPG power supply: the boiler is self-adapting without the need for conversion kits Riello presents the New Family New stainless steel heat exchanger Riello has always designed its products with care and dedication. Continuous improvement leads today to the evolution of the Family condensing range, starting from its primary element: the exchanger. The new Family exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. Access remains from the front, to facilitate maintenance operations. Riello has also optimized the DHW exchanger by adopting the most advanced fluid-thermodynamic analysis and simulation techniques to obtain the best performance and maximum comfort for the user in terms of waiting times and temperature stability during sampling, compared to a boiler traditional MAXIMUM POSSIBLE LOAD PROFILE IN RELATION TO THE TYPE AND POWER OF THE GENERATOR, UP TO XXL IN THE CASE OF 35 KW FAMILY. SANITARY ENERGY EFFICIENCY CLASS A, THE MAXIMUM VALUE CURRENTLY PROVIDED BY EU REGULATION 811/2013 FOR COMBINED GENERATORS (TRADITIONAL B OILER CLASS B). REDUCTION OF GAS CONSUMPTION COMPARED WITH A TRA ADTIONAL BOILER BY APPROXIMATELY 10%, ACCORDING TO EN13203-2. ALMOST NULL WAITING TIME FOR HOT WATER (< 1 SECOND) WITH DOMESTIC HOT WATER PRE-HEATING FUNCTION ACTIVE (TRADITIONAL BOILER ABOUT 40 SECONDS). Emissions always under control The new Family is equipped with the intelligent ACC combustion control system, which guarantees that the process always takes place in an optimal manner in any condition, thanks to the modulating gas valve and the ionization electrode. Thanks to the ACC, the Family is able to automatically adapt to the fuel (methane or LPG) without resorting to specific codes or accessory conversion kits. Family also reacts to the variation of the fuel title and to the pressure drops on the flue gas side. The ACC system detects the excess air value and intervenes by modulating the air/gas mixture to always keep it within the optimal parameters. The ACC system also simplifies installation. In the ignition phase, it does not require calibration and it is sufficient to select the type of combustible gas used by the boiler via the interface, if different from the default one (methane). Since the system keeps the value of the CO2 produced constant, even the smoke control during the ignition phase is no longer necessary for the correct functioning of the product. Controlling combustion also means guaranteeing constant emissions, which are always well below the limits set by the law. In fact, if the process takes place in an optimal manner, the gases produced will also have the best theoretical composition with respect to the other conditions. Control panel and functions Even clearer, more intuitive and easier to use, it integrates elegantly into the aesthetics of the machine. The large backlit display, the raised keys and the interface enriched with explanatory texts and icons help the user and the installer in navigation. Through the panel it is possible to view the operating status, carry out the programming and access the regulation of the boiler and system. The Family display is equipped with the new "Color Bar" which informs the user at a glance on the operating status of the boiler. In the event of anomalies, it is possible to immediately understand if a problem is critical and whether to request the intervention of technical assistance. GREEN Regular operation. The system is satisfying domestic hot water/heating requests or carrying out other automatic operations. A scrolling text at the bottom describes the function active at that moment. RED Presence of blocking anomalies that require an intervention by the Technical Assistance. An error triangle on the display gives access to the details of the anomaly. YELLOW Presence of anomalies that can potentially be solved by the user which allow even partial operation of the product. An error triangle on the display gives access to the details of the anomaly. GRAY The system is ready to serve any requests. No operation in progress and anomaly detected. RiCloud - Comfort at your fingertips The RiCLOUD intelligent remote control allows you to manage the comfort of your home in a simple and intuitive way, even when you are away from home. Through the dedicated app it is in fact possible to check the status of the heating system, but also to program the boiler's switching on and off, temperature and operating times directly from your smartphone or tablet. It is possible to manage up to 8 different zones, each controlled by its own RiCLOUD. RiCLOUD can also be installed in total wireless mode using a radio frequency receiver, available as an accessory, thus avoiding any electrical or masonry intervention. Many needs, one solution INTERIOR Inside the home, thanks to an elegant aesthetic that allows it to be inserted pleasantly into any environment . OUTDOOR Outdoors in a partially protected place, thanks to the IPX5D degree of protection and the standard antifreeze function down to -0 °C , without additional heaters. BUILT- IN Inside a built-in box or wall unit, thanks to its compact dimensions (25 kW model). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT THE IMMERGAS AREA ASSISTANCE IN ADVANCE IMMERGAS VICTRIX MAIOR 35 TT PLUS CONDENSING GAS BOILER FOR LPG HEATING ONLY WITH FUME EXHAUST KIT Technical features Product code: 3.024881 Typology: Heating only Class A heating energy efficiency Heating/DHW nominal heat input kW 34.9 Heating/DHW maximum nominal useful power kW 34.2 Useful thermal efficiency at 100% Pn (80/60 °C) 97.9% Useful thermal efficiency at 30% of the nominal load. (40/30°C) 108.5% Supply voltage/frequency: 230/50 Volt/Hz Expansion vessel 10 liters (real 7.1) Electrical insulation degree IP X5D Modulation range: 10 - 100% Boiler dimensions (HxLxP) mm 748 x 440 x 276 Empty boiler weight 35.8 kg Gas version available: LPG Product pluses: Wide modulation range Electronic ignition with ionization control Ideal for multiple withdrawals of domestic hot water (combined with a boiler) High hydraulic performance It integrates with solar systems VICTRIX MAIOR 35 TT PLUS Wall-mounted condensing boiler, for heating only with sealed chamber. Maximum comfort according to European standards. Combined with a boiler, it is ideal for simultaneous use of boiler water Particularly ideal for homes with multiple services or for all situations that require large withdrawals quickly, it guarantees a considerable production of domestic hot water. Boiler and Storage Unit can also be installed in different environments, thus increasing installation flexibility. It is characterized by the innovative primary exchanger which guarantees high flow rates and heads on the heating circuit, even when replacing old systems, with low risk of clogging , and by the presence of an "advanced" electronic card with electronic gas change ( without nozzle replacement) and self-adapting combustion control system. The new electronic card modulates the heating power of the boiler up to 12% and together with the low consumption circulator increases energy savings. The instantaneous models are equipped with a flow regulator and DHW inlet probe to obtain high DHW comfort: 3 stars *** according to the EN 13203 -1 standard. Also noteworthy is the wide range of modulation (from 10 to 100%) with high yields even in the presence of low energy absorption. The boiler also features an advanced and easy-to-use user interface with adjustment knobs, selection buttons and LCD display. Thanks to the condensing technology, it has a high efficiency and guarantees particularly low polluting emissions (NOX class 5). VICTRIX MAIOR TT PLUS is designed for outdoor operation in places partially protected from atmospheric agents (rain and snow) and is equipped with a standard antifreeze system which protects it down to a temperature of -5 °C (with optional kit up to - 15°C); moreover, it can be built -in inside the SOLAR CONTAINER or inside the home in the specific DOMUS CONTAINER technical cabinet: this allows for solutions such as GAUDIUM SOLAR PLUS V2 (only with “BASE” hydronic groups) COMFORT High hydraulic performance: the innovative condensing module guarantees high flow rate, low risk of clogging due to impurities in the system water, greater resistance to corrosion thanks to the special alloy. Boiler: prearranged as standard for combination with a boiler with a capacity of 80 to 2000 litres, it guarantees a high production of hot water. Thermoregulators: optional. They improve comfort and increase energy savings. DOMINUS app: optional. <strong">Simple and intuitive, it allows you to check the functioning and temperature of the boiler, switch it on and off from anywhere via smartphone or tablet. Via the optional Wi-Fi transmitter kit (code 3.026273), to be interposed to a wireless modem/router, it is possible to communicate from anywhere with the boiler circuit board. ENVIRONMENTAL COMPATIBILITY Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 5 (European Standards UNI 297 and 483): the best for reduced emissions of nitrogen oxides (NOX). Renewable energy: using a boiler with a capacity of 120 liters or more, the boiler can be connected to solar thermal systems for a greater production of hot water. Combination with thermal solar systems The Storage Tank Units with a capacity of 120 liters or higher are designed for combination with forced circulation thermal solar systems, including the UB INOX SOLAR 200 ErP version equipped with integrated solar circuit. VICTRIX MAIOR 35 TT PLUS can be connected to the entire range of Immergas Solar Solutions INSTALLATION High flexibility: approved to operate indoors and outdoors in partially protected places. IPX5D electrical protection. Standard antifreeze down to -5 °C. It is a very important directive established by the European Union and at the same time a decisive road that will lead all of Europe to reduce pollution and improve citizens' lives. The ErP directive (2009/125/EC) - the acronym stands for "Energy Related Products" - in fact sets very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements for energy and environmental performance for instruments that consume energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central purposes of the legislation: INCREASE THE ENERGY EFFICIENCY OF ENERGY USING MACHINES BY 20% REDUCE EMISSIONS OF CARBON DIOXIDE (CO2 ) INTO THE ATMOSPHERE BY 20% REACH A PERCENTAGE OF RENEWABLE ENERGY ON THE FINAL CONSUMPTION OF 20% Product Warranty: The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Ciao Green 25 CSI LPG code: 20095437 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Seasonal heating efficiency % 93 Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 20/25 kW Nominal heating thermal power: 19.50 kW Classification European Directive EEC 92/42: **** Efficiency at rated power: 97.5% Efficiency at reduced load (30%): 102.2% Max electric power heating Watt 69 Electrical protection degree IP X5D Expansion vessel capacity 8 litres Quantity of hot water with Δt=25°C: 14 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 715x405x248 ; 28kg LPG power supply  Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionization control). Exclusive services: Beretta offers 5 years of peace of mind thanks to the Kasko warranty extension formulas. HELLO GREEN ErP Ciao Green: high energy efficiency, low gas consumption and low emissions. The entry into force of the European ErP Directive (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Mandatory labeling provides greater transparency on the characteristics of products that can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2) by 20%, increasing by 20% the use of renewable energies and reduce energy consumption by 20% in EU countries. Condensing exchanger The innovative Beretta compact aluminum condensing exchanger is assembled with a brazing production process in a controlled atmosphere. In addition to allowing a more uniform distribution of heat, aluminum offers a high resistance to corrosion for the benefit of a longer duration over time. Aluminum is also chosen for its lightness, excellent conductivity, mechanical resistance, reliability and recyclability. The condensing exchanger makes it possible to recover a large part of the heat from the fumes by reducing losses in the chimney, and a large part of the latent heat, reaching a four-star energy efficiency value (according to European Directive EEC 92/42). The premix burner optimizes the combustion mixture by reducing NOx emissions to values ​​that place the boiler in Class 5, the highest according to the European Directive EN 677. Universal installation Ciao Green is designed to be installed outdoors in partially protected places or recessed thanks to the dedicated accessories and board anti-freeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit together with the siphon antifreeze heater kit. If the boiler is installed outside, without embedding, the lower cover is required for greater protection. The management The electronic panel is the brain of boiler management. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. A liquid crystal display and LEDs provide information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function. Characteristics: ErP boilers with synchronous modulating pump with low energy consumption (EEI≤0.20) Designed according to the ecodesign indications provided for by the European ErP Directive Energy Class > heating (class A) > DHW profile XL (class A) Seasonal heating efficiency 93% Aluminum condensing exchanger, two versions of 25 kW and 29 kW combined and one 25 kW heating only Designed following the ecodesign indications of the European ErP Directive Class 5 according to the UNI EN 483 European Standard It can also be installed externally and recessed through the adoption of special kits (optional) Display for viewing temperature and diagnostic codes IPX5D electrical protection degree Prepared for connection to the remote control (optional) Standard thermoregulation (optional external probe) Plumbing fittings, gas and sanitary taps (optional) Antifreeze kit available up to -10°C (optional) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less