GAS BOILER SIME BRAVA ONE 25 OF LPG - ErP Technical features. For heating and domestic hot water production Open chamber with natural draft Heating energy efficiency class: C Nominal thermal power: 8.7÷23.0 kW Efficiency class (EEC 92/42): ** Continuous sanitary flow: 10.7 l/min Dimensions (h x w x d): 700 x 400 x 250 mm; 34kg METHANE version General characteristics GOOD ONE OF ERP CONVENTIONAL - Instant (2 stars) Characteristics: Monothermal wall-mounted boiler Extremely compact dimensions Three-piece cloak DHW management with double probe Retroactive combustion control with electronic gas valve 2 open chamber versions with 23.0 kW domestic hot water production Integrated climatic regulation Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Product name GAS BOILER VAILLANT AtmoTEC PRO VMW 240/5-3 LPG OPEN CHAMBER - ErP Technical features For heating and domestic hot water production Open chamber with natural draft DHW nominal heat input kW 24 ErP energy class (heating and DHW): class C/B Performance stars (according to Dir. 92/42CEE) - *** Domestic hot water production (ΔT = 30K) 11.5 l/min Domestic hot water comfort stars (prEN 13203) - ** Expansion vessel capacity: 10 l Dimensions (hxpxl) mm 800 x 338 x 440 Code: 0010016269 Version: CNG or LPG General characteristics AtmoTEC PRO Standard wall mounted boiler for heating and domestic hot water Sanitary comfort even with low flow rates Intuitive display and simplified adjustments Reduced electricity consumption Suitable for outdoor installations down to -10°C High efficiency pump. Energy efficiency class C/B The atmoTEC pro VMW (heating and DHW production) are available in powers from 24 kW. atmoTEC pro has been designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. Its simplicity of regulation makes it the ideal boiler for all users. AtmoTEC pro is equipped with an extremely simple interface with plain text and backlit display. The reduced dimensions of atmoTEC pro VMW 80cm high, 44cm wide and 35cm deep (identical to the previous version) allow installation in any environment. A new high-efficiency pump and new electronics allow atmoTEC pro to consume very little electricity, guaranteeing considerable savings throughout the year. Ecodesign Directive (ErP) 2015 How to be ready for new EU legislation What will happen from 26 September 2015? From this date it will no longer be possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high-efficiency pumps and compliant with the new ErP requirements such as emission, noise and efficiency levels. In particular, the installation of traditional open chamber boilers will only be possible to replace old boilers installed in multi-family buildings which discharge the fumes into branched collective flues (CCR). Products placed on the market before 09/26/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed.   ErP and ELD: what do they mean and how are they different? ErP : The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive is aimed at two categories of products relevant to installers and resellers in the sector: Category 1 Includes space heating appliances: electric, gas, oil, combi boilers, heat pumps and cogenerators up to 400 kW. Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres.   ELD: in addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, it is possible to increase the energy classification of the system which will be calculated by the installer and indicated on the package label. Let's take a look at the new labels...   When and how will the new rules apply?   On 26 September 2015 the new rules will come into effect. Until then, neither manufacturers, retailers or installers have to comply with the new Ecodesign or labeling provisions. Once the new rules come into effect, manufacturers will only be able to manufacture products that comply with the new Ecodesign requirements, and will be required to supply an energy label with the products     Why push condensing technology right away?   For the energy requalification of individual homes, the 2007 Budget Law was extended until 31 December 2015. The request for a 65% tax deduction concerns, for example, the replacement of a traditional boiler with a condensing boiler.     What will Vaillant support be?   7 year guarantee   The 7-year guarantee on new boilers is another excellent reason to offer Vaillant to your customers. In addition, know that by replacing a Vaillant boiler over 15 years old with a new generation one, the warranty extension will be provided free of charge by the Vaillant Official Technical Assistance Center against a maintenance contract. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Baxi condensing boiler Mod. NUOVA PRIME 26 complete with flue gas exhaust kit and Baxi maGO thermostat Wi-Fi included methane or LPG Model: Prime 26; Typology: Condensation; Installation: Recommended for indoors; Heating energy class ErP: A; Energy class in DHW production ErP: A; Load profile: XL; Power supply: Methane or Natural Gas (G20/G21); Boilers running on methane which can be converted to LPG and propane air by means of a specific regulation (conversion kit not necessary) Performances : DHW nominal heat input kW 26.7 Heating nominal heat input kW 20.6 Sanitary nominal thermal power kW 26 Seasonal space heating energy efficiency ŋs % 93 Emissions of nitrogen oxides NOx mg/kWh 38 Minimum operating temperature °C -5 Heating expansion vessel capacity l 7 Heating circuit water temperature adjustment °C 25-80 DHW circuit minimum water flow rate l/min 2 Minimum heating circuit water pressure 0.5 bar DHW circuit maximum water pressure bar 8 Dimensions: Dimensions (hxlxp) mm 700x395x279 Type of Gas Methane/LPG/Propaned air Boilers running on methane which can be converted to LPG and propane air by means of a specific regulation (conversion kit not necessary) NEW PRIME Ideal for replacing conventional boilers. The range of Prime condensing boilers is divided into two models, 26 and 30 kW for heating and instantaneous domestic hot water production. Prime has been designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling regulation (EU Regulation 2017/1369) requires the labeling of products according to a decreasing energy scale that goes from A++ to G and which will pass from A+++ to F from 09/26/2019. The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created to allow the final consumer, by providing true and comparable data, to make informed choices by targeting high-efficiency products. Prime 26 Mago: the advantages of Prime with the STANDARD Baxi Mago The Prime 26 Mago boiler is STANDARD equipped with the Baxi Mago modulating chronothermostat with integrated Wi-Fi designed to simplify the life of installers, service centers and end users, as it allows you to manage home comfort directly from an App, via the Wifi. By downloading the dedicated App on your smartphone or tablet, it will be possible to connect to the Baxi Mago to control the temperature, manage programming, view the consumption graph, read any error messages, set the holiday mode, etc. An innovative tool with a unique design, which combines extreme practicality with a modern, captivating aesthetic with a strong appeal. Benefits Baxi Mago it is beautiful to look at and easy to use thanks to the comfortable wheel knob, the backlit screen with large and easy to read numbers; allows automatic and fast programming based on the user's schedules and habits; allows management from different smartphones and tablets, so that each member of the family can interact; follows your programs by creating five different daily scenarios linked to multiple temperature requirements ("daytime", "nighttime", "evening", "away from home" scenario, etc.) it saves you money and you can consult the energy consumption graphs with weekly, monthly or yearly trends The advantages of the Prime condensing boiler Easy to use thanks to the control panel equipped with knobs and backlit LCD display Easy installation thanks to the ultra-compact dimensions (700x395x279 mm - including knobs) and low weight (26 kg) Easy replacement of conventional boilers thanks to central flue gas outlet Modulation range 1:5 greater efficiency and silence Dedicated app for smartphones and tablets for remote control of the boiler (STANDARD for the Prime 26 Mago model; optional accessory for all other models) Arrangement for combination with the Baxi integrated solar system Ø 80 double exhaust as standard Connection to rigid and flexible Ø 50 mm exhaust pipe: solution for restoring flues - for the mod. 26 kw total length (exhaust + intake) 35 metres Connection to pressurized collective flues Boilers running on methane that can be converted to LPG and propane by means of a specific regulation (conversion kit not necessary) hydraulic system Electric three-way diverter valve Pre-mix burner in stainless steel Stainless steel water/fumes exchanger Sanitary heat exchanger in stainless steel Modulating fan with electronic speed variation Automatic by-pass High efficiency circulation pump Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve at 3 bar 7 liter expansion tank Thermoregulation system Arrangement for connection to a zone system Combination with modulating thermostat/chronothermostat Control system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch which blocks the gas in case of water shortage NTC safety probe against fume overheating Temperature control using NTC probes Total antifreeze device Electronic thermometer. Heating circuit pressure gauge Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THIS PRODUCT IS MADE TO ORDER. SHIPPING TAKES PLACE WITHIN 10 WORKING DAYS FROM THE DATE OF PURCHASE NB THE BOILER WILL BE SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE RIELLO RESIDENCE EXTERNA CONDENS 25 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP Technical features Product code: 20096734 specific energy label according to the European directive ErP Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 25 kW Useful thermal power (sanitary): 25 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 105% Profit return 30% (47th return): 109.6% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 785 x 553 x 275 ; 44 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG. Remote control panel (supplied): offers the possibility of controlling boiler operation without directly accessing it.   General characteristics RESIDENCE EXTERNAL CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models For outdoor installations Residence Externa Condens is specifically designed for outdoor installation and stands out for its extremely small dimensions. Equipped as standard with the exclusive Riello condensing exchanger, completely made of aluminum and without welding, synonymous with efficiency and durability, resistant to system dirt with high heads and excellent heat exchange. The climatic regulation is managed directly via the boiler board: this allows the temperature of the heating system to be suitably adapted to the external climatic conditions. Residence Externa Condens is controlled directly from inside the home thanks to the exclusive remote control supplied as standard. Residence Externa Condens is available with powers from 20 to 32 kW. Remote control panel supplied as standard: Modulation ratio 1:8 which allows the boiler to respond to all heat requests. Self-modulating circulator, low consumption (IEE≤0.20). Antifreeze function that protects the heating and DHW circuits down to -5°C with the possibility of extending the protection down to -15°C (optional). "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models). Possible "open-air" installation using the special waterproof kit (optional) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of “ Energy related Products ” (products connected to the use of energy) and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design ("eco-design "). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players. The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range.   In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate.   This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders.   Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO START CONDENS AR 29 KIS METHANE WALL-MOUNTED BOILER FREE FUME KIT KASKO INSURANCE INCLUDED + SHIPPING ON PLATFORM Product code: 20100124 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 25 kW Sanitary nominal heat input: 29 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.9% Profit return 30% (47th return): 108.4% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 16.6 l/min Dimensions (hxwxd) mm 792 x 405 x 248 ; 32 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE START CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Combined models for indoor, outdoor, built-in, with stainless steel storage tank Start Condens is the new Riello condensing wall-mounted proposal for small and medium-sized domestic users. The new compact aluminum condensing exchanger guarantees efficiency and reduction of polluting emissions. It can also be installed outdoors in a partially protected place. It is available in version 25 (with 25 kW of DHW power and 20 kW in heating) and 29 (with 29 kW of DHW power and 25 kW in heating). Characteristics: Low consumption circulator (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at temperature, reducing waiting times during withdrawal (can be activated by the user) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Natural gas operation as standard with the possibility of conversion to LPG (G31) and propane air (accessories), this modification is the responsibility of the installer or the technical assistance service. Possibility of outdoor installation in partially protected places, using special accessory kits. Yield **** Low polluting emissions Aluminum condenser, with premix burner Combined models and heating only for indoors, outdoors in partially protected places Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO START CONDENS 29 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP Technical features RIELLO START CONDENS BOILER 29 KIS METHANE Technical features Product code: 20100124 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 25 kW Sanitary nominal heat input: 29 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.9% Profit return 30% (47th return): 108.4% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 16.6 l/min Dimensions (hxwxd) mm 792 x 405 x 248 ; 32 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG General characteristics START AR Yield **** Combined models Start AR is the condensing boiler specifically designed to work with high temperatures and therefore with radiator systems; it is specially designed to have a reduced formation of condensate with system return temperatures above 50°C. It is available in powers of 25 and 29 kW. Characteristics: Low consumption circulator (IEE≤0.20) Climatic regulation managed directly by the boiler control unit Assembly template, hydraulic fittings, power supply cable supplied ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of “ Energy related Products ” (products connected to the use of energy) and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design ("eco-design "). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players.   The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range. In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders.   Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Unical KONe C28 Low NOx condensing boiler complete with flue kit - NEW ErP Model: KONe 28C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power: 28.9kW Seasonal heating energy efficiency ambient ηs 93% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 15.8kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 88.4% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 5.3 kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 97.5% Annual electricity consumption QHE GJ: 49 Heating energy efficiency. of water ηWH: 85% Daily fuel consumption Qfuel : 23.05 kWh Sound power level indoors Lwa db(A) 55.2 Annual electricity consumption AEC: 402 kWh Specific sanitary water flow rate (Dt 30 °C): 13 l/min DHW production in cont. Dt 25 K (mixed): 15.5 l/min Expansion vessel capacity: 10 l Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345mm; 37kg KONe KONe is a wall-hung condensing boiler with very low polluting emissions, thus falling within the new Class 6, the most restrictive currently in force. It is available in instant combined version. KONe has all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) ηs 93% (EU regulation 813/2013 - dir. ERP 2009/125/CE) Energy class A Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx class 6 (according to EN 15502-1) thanks to the fully electronic modulating premix burner with constant combustion ratio (both gas valve and fan) Production of hot water up to 13.3 l/min Dt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) exchanger in AISI 316L stainless steel "Pit stop" maintenance for technical assistance interventions "Soft touch" control panel with "Upgradable" protective closure via USB connection for diagnostics/programming with computer or dedicated handheld tool High efficiency modulating circulator HWS "Hot Water Speed" is the special KONe electronics that switches from heating to DHW function with burner and pump always active, improving user comfort who does not have to wait for hot water Management of 2 zones with 2 thermostats (modulating/on -off) thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) Sliding temperature programmed to operate with the lowest possible delivery temperature to help save energy Anti-overheating post-circulation automatically after the burner goes out, the boiler keeps the pump running for 5 minutes, preserving the components Chimney sweep function allows maintenance technicians to carry out the checks required by current standards in terms of efficiency and emissions Pump anti-blocking the blocking of the pump following long stops is avoided thanks to an automatic impulse of 5 sec. Everything like in a “Sim Card” All the operating characteristics of the boiler are memorized inside a SIM. The Unical Assistance Center is equipped with a handheld instrument with a 3" touchscreen that can be connected directly to KONe to develop the monitoring activity by speeding up the intervention times for solving any problems: data acquisition for a computer analysis monitoring in real-time operating parameters even remotely (from the office or PDA) management of "faults-history" “Pit stop” maintenance in less than 2 minutes KONe is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Unical KON1 28C kW Methane or LPG Condensing Boiler Complete with Fume Exhaust Kit, various colors available - NEW ErP Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power: 33.8 kW Seasonal heating energy efficiency ambient ηs 93% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 18.2kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 87.5% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C) P1 kW: 6.1 kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 97.5% Annual electricity consumption QHE GJ: 56 Heating energy efficiency. of water ηWH: 85% Daily fuel consumption Qfuel : 23.13 kWh Sound power level indoors Lwa dB(A) 55.2 Annual electricity consumption AEC: 402 kWh DHW production in cont. Dt 25 K (mixed): 18.3 l/min Expansion vessel capacity: 10 l Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 810x450x345 mm; 40kg Gas transformation kit inside documentation envelope KON1 KON1 is the latest among the "furnishing boilers" that Unical presents in synergy with the ArtÙ Design Studio. Soft lines and an elegant front, available in different colours, enclose a latest generation condensing boiler running on methane or LPG, with instantaneous hot water production up to 18 l/min. KON1 can also be installed with a completely hidden flue system. The range includes 3 powers: 24, 28 and 35 kW. The exclusive Unical system of both hydraulic connections and the totally disappearing smoke outlet, allows an elegant installation and integration of KON1 in both modern and classic environments, avoiding unsightly exposed pipes. HWS “Hot Water Speed” is the new electronics of KON1 which switches from heating to DHW function with burner and pump always active, considerably improving the comfort of the user who does not have to wait for hot water. Secondary exchanger In AISI 316L stainless steel - with 12 plates (mod. 24) - with 16 plates (mod. 28 and 35) Particularly efficient because it is suitable for condensing boilers by exploiting their low temperature. Its "ecological" project is distinguished by a new design of the plates which allows for the transfer of a greater quantity of heat by making the most of the characteristics of stainless steel. Outstanding modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) ηs 93% (EU regulation 813/2013 - dir. ERP 2009/125/CE) Energy class A Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function Low NOx class 6 (according to EN 15502-1) thanks to the modulating premix burner Hot water production up to 18.3 l/min Dt 25 with special heat exchanger Management of 2 temperature zones (high/low) by applying a second on/off thermostat "Pit stop" maintenance and convenient internal control panel for technical assistance interventions EASYr : remote control (standard) with chronothermostat functions, applicable wirelessly to the wall or free-standing with support High efficiency modulating circulator Prepared for future applications in systems and suitable to meet the requirements of the new installation standards No visible command on the boiler, but it is EASYr (standard) which, without wires, performs the dual function of chronothermostat and remote control inside the home. Two-way radio frequency communications; Operating parameters control; Weekly programming; Room antifreeze function; Can be combined with external probe; Applicable to the wall or free-standing with support Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: PRODUCT DISCONTINUED --> THE NEW MODEL EXCLUSIVE GREEN E 25 WILL BE SHIPPED Beretta EXCLUSIVE GREEN HE 25 boiler Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 20 kW Heating nominal heat output: 21.44 kW Classification European Directive EEC 92/42: ★ ★ ★ ★ Sanitary comfort ★ ★ ★ (EN 13203) NOx emission class: 5 (UNI EN 677) Efficiency at rated power: 98.7% Efficiency at reduced load (30%): 109.6% Total electric power: 93W Electrical protection degree: iP X5D Expansion tank capacity: 9 lt Quantity of hot water with Δt=25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min Sanitary water temperature selection range: 35 - 60°C Dimensions (hxlxp) mm 845x453x358 ; 44kg METHANE power supply Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control). EXCLUSIVE GREEN HE HI-EFFICIENCY ECOLOGICAL CONDENSING WALL-MOUNTS The new Exclusive Green E condensing boilers, equipped with the innovative Beretta front exchanger, in addition to implementing the requests of the ErP standards, improve all the peculiarities confirming themselves as top of the range. Seasonal efficiency up to 94%, very wide modulation range (up to 1:10), low consumption modulating circulator with the possibility of increasing the head up to 7m and reduced consumption are some of the main features. The new Exclusive Green E boilers also offer excellent reliability and technology and, thanks to their high performance, are an excellent solution in hybrid systems with solar thermal and heat pumps. The external probe that allows you to activate the climatic thermoregulation is standard as standard. Furthermore, by adding the optional BeSMART WiFi Comfort Control kit and the LINK MODE interface board kit, Exclusive Green E constitutes a class A+ system and home comfort can be governed by remotely via APP for smartphones and tablets. The boilers are equipped with a special high-head fan designed to be able to pipe flues with Ø 60 mm or Ø 50 mm flues. Front access condensing heat exchanger ( New ! ) The Exclusive Green E boiler is equipped with the new Beretta condensing exchanger with front access. An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. Modulation 1:10 The range offers a wide range of modulation to respond to real energy needs, while simultaneously offering a high reduction in consumption. Beretta realizes this system through a totally pneumatic and therefore safe and reliable model. The electronics in fact act only on the number of fan revolutions (inlet air flow rate) without intervening on the injection of the gas quantity which is automatically sucked in. Beretta therefore introduces a new double distribution mixer: a mechanical damper with a calibrated weight which opens or closes a part of the section of the venturi so as to divide the modulation range into two stages (smaller section with low air flow rates or larger section with high air flow rates). Beretta has also developed a specific silencer in the air intake to reduce any resonances generated by the new mixer. Warranty All products for sale on our site are new and packed. The guarantee yes

Read more less

Technical features Model: rinNOVA COND PLUS E 35S Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Heating / DHW nominal heat input kW 29.0 / 33.5 Heating / DHW maximum useful output 60°/80°C * 28.2 / 32.5 Energy yield n° **** NOx class 6 Expansion vessel capacity 7.0 l (total) Maximum range (ΔT=25K) / (ΔT=35K) 18.6 / 13.3 Degree of protection IPX5D Dimensions HxWxD 700x400x290; 34.5Kg General characteristics renew COND PLUS RinNova Cond Plus is the new BIASI range of wall-mounted condensing boilers: excellent performance thanks to the new heat exchanger and ease of use thanks to the digital control panel with display. Available in versions for heating and domestic hot water production and for heating only RinNova Cond Plus presents a complete range of powers, 20 and 30 kW combi models and 16 KW SV models, in the same extremely compact dimensions (700 x 400 x 290 mm) . RinNova Cond Plus has its strong point in the innovative heat exchanger designed to provide high yields that last over time digital control panel, designed to communicate with the user in an easy and comfortable way. Like the entire BIASI condensing range, RinNova Cond Plus allows you to obtain maximum savings from climatic thermoregulation, based on the system in which the boiler is installed Characteristics: High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfort (★★★ EN 13203) Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion Total premix burner, built in stainless steel (Class NOx 6) Modulation 1:5 CNG and also LPG Sanitary plate heat exchanger in stainless steel 7 liter expansion tank High efficiency pump with low energy consumption Maximum power adjustable according to the system • IPX5D degree of protection Can be installed in a partially protected place Integration with BIASI solar systems, using a solar kit Digital control panel with backlit display Analog pressure reading Arrangement for remote control and external probe. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display and fill guide View annual maintenance expiry The display operates according to the modes: 1. INFO. Info mode displays the following information: External temperature (in case of external probe connected) K value (in case of external probe connected) Sanitary / heating temperatures chosen by the user Smoke temperatures. 2. PROGRAMMING. The programming mode allows you to change the boiler parameters. - In chimney sweep mode it is possible to test the boiler and adjust the gas valve. Thermoregulation By connecting the external probe and the remote control (optional) directly to the boiler, climatic regulation can be used. RinNova Cond Plus will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption. By using the climatic regulation, the regulation efficiency is also raised, giving greater value to your home. High regulation single coil primary heat exchanger Biasi introduces on the market the new stainless steel heat exchanger for condensing boilers: Round. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single strip of stainless steel to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit. The ease of cleaning and the robustness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations. Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. All ready for Energy Labeling What is it about? From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive ( ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product you wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. Is it about me too? YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015 , the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its devices or systems with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices; technical data sheet of the system with the parts relating to the product or system already completed. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device and/or system to the public. Therefore even professionals such as plumbers, installers or planners can fall into this category. Everyone is required to ensure that: all appliances and/or systems have their respective labels and make sure that they are clearly visible; all devices and/or systems are always accompanied by the mandatory technical data sheets; any type of advertising, promotional or technical material showing energy data or price indications contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP) : The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of device, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the final customer can make his choice in the most informed way possible. SYSTEM LABEL In addition to the product label, the system label is also provided if a series of matched appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating max heat input kW 28.0 Nominal thermal power kW 27.0 Efficiency Pmax (80/60°C) % 103.5 Directive efficiency class 92/42 EEC **** Max. heating operating pressure bars 3 Heating pressure min. bars 0.8 Domestic hot water production: -Δt 25°C: 15.7 l/min -Δt 30°C: 13.0 l/min Sanitary working pressure Max: 9 bar Dimensions WxHxD mm 700x400x320 mm Power supply: METHANE *NB: ALSO OPERATES ON LPG WITH THE USE OF A SPECIAL CONVERSION KIT TO BE REQUESTED FROM THE AUTHORIZED SERVICE CENTRE. General characteristics DIVACONDENS F28 D DIVACONDENS D is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes. ADVANTAGES Robust post-condenser powered by the closed circuit of the primary circuit, i.e. without the inlet of external mains water. The heat exchange with the fumes takes place inside large diameter water passages. Generator with simple and rational operation Condensate collection device to protect the air pressure switch, for regular combustion even in the presence of very cold external temperatures ECO function in DHW for greater savings in the period of low use of hot water Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems Place of installation: also for outdoors in a partially protected place down to -5°C as standard Certified operation also with propane air (50% air – 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center (max total price of 30 euros + VAT) Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available. THE BOILER CONTROL The control box of DIVACONDENS D consists of an easy to use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. MAIN COMPONENTS RECOVERY UNIT/HYDRAULIC DIAGRAMS FUME THERMOSTAT It preserves the integrity of the polypropylene pipes and, together with the air pressure switch, constitutes a double safety device for the evacuation system. OPTIMIZE COMFORT AND SAVINGS ROMEO TIMER (optional) The Romeo remote control allows control and setting of the boiler functions directly from the room in which it is installed. Comfort programming is possible on a weekly basis and also includes the 'holiday' function. Romeo is available with wired or wireless connection. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. HIGH EFFICIENCY CIRCULATOR EU regulation 622/2012 establishes that all boilers introduced on the market from 1 August 2015 must be equipped with a high-efficiency circulator (technically speaking, with an EEI, energy efficiency index ≤ 0.23). This decision was taken following the enormous energy consumption of all pumps and circulators installed in different applications in Europe. In practice, a high-efficiency circulator - incorporated in the boiler - reduces up to 30% of the total electricity consumption of the boiler itself. ONE CENT PER HOUR If we consider the maximum consumption of the pump mounted on the Divacondens D (0.04 kWh) compared to the previous circulator (0.085 kWh) we will save almost a euro cent for each hour of operation (electricity cost €0.19/kWh). Let's therefore multiply this tiny value by each hour of operation of the circulator in a year (for example 2,500 hours, for a moderately cold climate) ... €21.40 will be the annual saving if we replace an old boiler, and therefore also a old circulator, with Divacondens SUN EASY FUNCTION DIVACONDENS D boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and switches on the burner only if necessary. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, by exploiting and integrating even the smallest solar contribution, otherwise lost by mixing the thermostatic valves. FUNCTIONS ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied due to thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode. OPERATION IN SLIDING TEMPERATURE With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The electronic board of DIVACONDENS D adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite. Product Guarantee: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO alDENS 24* CONDENSING BOILER COMPLETE WITH LPG METHANE FUME KIT ideal for radiator systems - NEW ErP Technical specifications Model:ÿALDENS HE Product codeÿLPG: 103021021000 Product codeÿMETHANE: 103121029000 Technical data according to ErP directives Energy efficiency class in heating: A Sanitary energy efficiency class: A Load profiles: XLÿ Technical features: Minimum/Nominal useful power kW 2.9 ú 23.0 Minimum heat input with Methane/ Propan3.0 / 4.4 Efficiency class:ÿ Efficiency at nominal load in CONDENSATION % 100.9 Profitability at 30% of load% 98.6 NOx class 5 Operating temperature in heating min./maxøC 30 - 85 Adjustable temperature in sanitarywareøC 38 ú 60 DHW production mixed with t 25 l/min 13.2 Capacity of expansion vessel l 8 Supply voltageÿV-Hz 230/50 Degrees of protection IP X5D Dimensions HxWxD mm 700x420x345; 34 kgs Main features ALDENS ALDENS the new SAVIO range of condensing wall mounted boilers: excellent performance thanks to the aluminum heat exchanger and ease of use thanks to the control panel with knobs and display. Available in the combi version which combines the heating function and the production of domestic hot water. ALDENS presents a complete range of powers, 24 and 35 kW combi in the same extremely compact dimensions (700 x 420 x 345 mm). ALDENS has the strong point in the innovative primary heat exchanger in Al/Si/Mg with low water content designed to provide high yields that last over time. The digital display communicates the boiler operating parameters to the user in an easy and convenient way. Like the entire condensing range, SAVIO ALDENS allows you to make the most of savings from climatic thermoregulation, based on the system in which the boiler is installed. Main features: Outstanding fine 1:8 modulation ratio Efficiency>107% (ex dir. CE 92/42) Primary heat exchanger in ultra-flat Al/Si/Mg Electronics with HWS or Hot Water Speed ​​function? Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of fine hot water 13.3 l/min t 25 with special 12-plate (mod. 24 kW) and 16-plate (mod. 35 kW) exchanger in stainless steel Maintenance or Pit Stop? simple and intuitive control panel High efficiency modulating circulator (in line with ErP Dir. 2015) Sanitary exchanger Sanitary comfort ensured by the suitably sized plate exchanger to guarantee the best performance in terms of domestic hot water, reducing the waiting time and guaranteeing temperature stability. Modulating circulator with deaerator It represents the state of the art in the standard of high efficiency. In line with the ErP directive of 2015, with less than 1 W of consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed on the delivery/return automatically doses the boiler power to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. Exclusive Ai/Si/Mg heat exchanger It is made in a special Aluminum/Silicon/Magnesium alloy which ensures its efficiency and resistance over time. Thanks to the configuration of internal heat exchangers, efficiencies higher than 107% are achieved in the condensing regime, which means great economic savings and very low environmental impact for the user. The 35 kW version suitably increased. Plus Manage 2 zones with 2 thermostats:ÿALDENS versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 different temperature heating zones (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats.ÿ Anti-overheating post-circulation:ÿFor 15 seconds, it maintains the thermal balance between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of.ÿ Sliding temperature operations:ÿFor maximum running economy.ÿ Antifreeze protection:ÿIt intervenes at 5°C and is activated in both domestic hot water and heating, bringing the temperature in the boiler to 15°C. The risk is avoided that ALDENS may freeze if low temperatures persist in the room where it is installed. If there is a lack of gas, the block signal will appear on the display.ÿ Pump anti-blocking: blocking of the pump following long stops is avoided thanks to an automatic 5-second pulse that the electronics sends to the motor every 24 hours of stop The multifunction LCD display, with timed backlighting, allows: Reading of the heating and sanitary temperatures Display of lockout due to lack of flame Error code display Malfunction signaling Operating/stand-by status Burner operating status Diagnostics with signaling of 11 anomalies Ecodesign Directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less