Wall Boilers
Unical Unical Kon C24 Condensing Gas Boiler + Smoke Kit - Erp
Technical features Seasonal efficiency class for heating: Class A Sanitary seasonal efficiency class: Class A Declared load profile: M Nominal useful power: kW 22.6 Minimum useful power: 2.9 kW Combustion efficiency at nominal load 97.2% Combustion efficiency at reduced load 98.6% Minimum pressure of the heating circuit bar 0.5 Maximum pressure of the heating circuit bar 3 Minimum flow rate of the heating circuit. (∆t 20 °C) 1.2 l/min Specific sanitary water flow rate (∆t 30 °C) 11.2 l/min Total capacity of expansion tank 8 l IP X5D degree of protection Power supply: methane Characteristics Exchanger/Condenser in Aluminium/Silicon/Magnesium Ignition and electronic flame control with single electrode Modulation ratio 1:8 Fully electronic total premix burner with constant combustion ratio (both the gas valve and the fan) HWS “Hot Water Speed”: to eliminate the delay in DHW production Secondary exchanger in stainless steel with 12 "thermal length" plates, optimized for condensation, 14 plates (mod. 28-35) Operation down to -15° Modulating circulator according to the power request managed by the high-efficiency on-board electronics
€785,00 - €985,00
Savio Savio Aldens 24* Gas Condensing Boiler Complete With LPG Fume Kit
Overview SAVIO alDENS 24* CONDENSING BOILER COMPLETE WITH LPG FUME KIT LPG ideal for radiator systems - NEW ErP Technical specifications Model:ÿALDENS HE Product codeÿLPG: 103021021000 Product codeÿLPG: 103121029000 Technical data according to ErP directives Energy efficiency class in heating: A Sanitary energy efficiency class: A Load profiles: XLÿ Technical features: Minimum/Nominal useful power kW 2.9 ú 23.0 Minimum heat input with Methane/ Propan3.0 / 4.4 Efficiency class:ÿ Efficiency at nominal load in CONDENSATION % 100.9 Profitability at 30% of load% 98.6 NOx class 5 Operating temperature in heating min./maxøC 30 - 85 Adjustable temperature in sanitarywareøC 38 ú 60 DHW production mixed with t 25 l/min 13.2 Capacity of expansion vessel l 8 Supply voltageÿV-Hz 230/50 Degrees of protection IP X5D Dimensions HxWxD mm 700x420x345; 34 kgs Main features ALDENS ALDENS the new SAVIO range of condensing wall mounted boilers: excellent performance thanks to the aluminum heat exchanger and ease of use thanks to the control panel with knobs and display. Available in the combi version which combines the heating function and the production of domestic hot water. ALDENS presents a complete range of powers, 24 and 35 kW combi in the same extremely compact dimensions (700 x 420 x 345 mm). ALDENS has the strong point in the innovative primary heat exchanger in Al/Si/Mg with low water content designed to provide high yields that last over time. The digital display communicates the boiler operating parameters to the user in an easy and convenient way. Like the entire condensing range, SAVIO ALDENS allows you to make the most of savings from climatic thermoregulation, based on the system in which the boiler is installed. Main features: Outstanding fine 1:8 modulation ratio Efficiency>107% (ex dir. CE 92/42) Primary heat exchanger in ultra-flat Al/Si/Mg Electronics with HWS or Hot Water Speed function? Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of fine hot water 13.3 l/min t 25 with special 12-plate (mod. 24 kW) and 16-plate (mod. 35 kW) exchanger in stainless steel Maintenance or Pit Stop? simple and intuitive control panel High efficiency modulating circulator (in line with ErP Dir. 2015) Sanitary exchanger Sanitary comfort ensured by the suitably sized plate exchanger to guarantee the best performance in terms of domestic hot water, reducing the waiting time and guaranteeing temperature stability. Modulating circulator with deaerator It represents the state of the art in the standard of high efficiency. In line with the ErP directive of 2015, with less than 1 W of consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed on the delivery/return automatically doses the boiler power to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. Exclusive Ai/Si/Mg heat exchanger It is made in a special Aluminum/Silicon/Magnesium alloy which ensures its efficiency and resistance over time. Thanks to the configuration of internal heat exchangers, efficiencies higher than 107% are achieved in the condensing regime, which means great economic savings and very low environmental impact for the user. The 35 kW version suitably increased. Plus Manage 2 zones with 2 thermostats:ÿALDENS versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 different temperature heating zones (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats.ÿ Anti-overheating post-circulation:ÿFor 15 seconds, it maintains the thermal balance between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of.ÿ Sliding temperature operations:ÿFor maximum running economy.ÿ Antifreeze protection:ÿIt intervenes at 5°C and is activated in both domestic hot water and heating, bringing the temperature in the boiler to 15°C. The risk is avoided that ALDENS may freeze if low temperatures persist in the room where it is installed. If there is a lack of gas, the block signal will appear on the display.ÿ Pump anti-blocking: blocking of the pump following long stops is avoided thanks to an automatic 5-second pulse that the electronics sends to the motor every 24 hours of stop The multifunction LCD display, with timed backlighting, allows: Reading of the heating and sanitary temperatures Display of lockout due to lack of flame Error code display Malfunction signaling Operating/stand-by status Burner operating status Diagnostics with signaling of 11 anomalies Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers
€1.074,00
HERMANN SAUNIER DUVAL Gas Boiler Saunier Duval Themafast 4 Condensing 26 25 Kw Methane Complete With Kit For Smoke Exhaust - New Erp
GAS BOILER SAUNIER DUVAL THEMAFAST 4 CONDENSING 26 25 kW METHANE COMPLETE WITH FUME EXHAUST KIT - NEW ERP NB: THIS MODEL IS USED EXCLUSIVELY TO CNG, BUT IT CAN BE CONVERTED TO LPG FREE OF CHARGE THROUGH AN AUTHORIZED SAUNIER DUVAL SERVICE CENTER Model: ErP efficiency class in heating/DHW: A/A Sanitary load profile: XL Type: Heating and domestic hot water Combustion chamber: sealed Domestic hot water production technology: AquaspeedFAST® Heating Nominal power P min/max heating 80/60 °C: kW 5.1/24.5 Partial load efficiency 30% 40/30 °C %: 108.4 Sanitary Rated power min/max (60 °C): kW 5.1/25.5 Specific flow rate (∆T=25 K): l/min 15 Continuous flow rate (∆T=30 K): l/min 12 Min/max DHW temperature: 38/60 °C Electrical characteristics Total absorbed electric power: W 137 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (hxwxd): 740 x 418 x 344 mm METHANE version THEMAFAST 4 CONDENSING ThemaFast 4 Condensing boilers can count on the exclusive Aquaspeed FAST® system for the production of domestic hot water combined with condensing technology which ensures immediate and continuous availability of domestic hot water for superior comfort by eliminating unnecessary waiting times. The range includes 3 models of 25.30 kW and 35 kW. Characteristics: Energy classification 4 stars ****(92/42/EEC) with yields up to 109.2%; Sanitary comfort 3 stars ***(EN 13203-1), thanks to the exclusive Aquaspeed FAST® technology with sanitary stainless steel plate heat exchanger and integrated micro-accumulator which allows immediate delivery of hot water thanks to the available reserve. Control panel with backlit digital display, easy to use: the user can easily select the desired functions and temperatures. Solar Easy: all models in the ThemaFast 4 Condensing range are compatible with all solar systems thanks to a series of solar kits. The small dimensions make all ThemaFast 4 Condensing models perfect both for replacement and for installation in newly built systems. Continuous domestic hot water (DHW) production up to 20 l/min Low NOx emissions - class 5 (EN 483) Total premix burner and primary heat exchanger in anti-corrosion stainless steel High efficiency and modulating circulator Heating system antifreeze function Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.107,00
RINNAI Rinnai Gas Condensing Boiler Amami 24 Methane Complete With Smoke Kit-
Overview RINNAI CONDENSING BOILER AMAMI 24 METHANE COMPLETE WITH FUME KIT: Combined premix gas condensing boilers. Technical specifications Model: Love Me 24 Code: A203C Nominal heating heat input: 16.5 kW Sanitary nominal heat input: 24 kW Energy efficiency marking 92/42 EEC:ÿ **** Efficiency at full loadÿ(80ø/60ø):ÿ98.2% Return profit to partial loadÿ30%: 109.7% Sealed chamber, forced drafts Nominal power modulation:ÿ(Tm/Tr=80/60øC) Heating kW4.4 16.2 Nominal power modulation:ÿ(Tm/Tr=36/30øC) Heating kW 4.9 - 17.6 Pollution class marking:ÿNox EN 483 5 G20 gas consumption at 1.013 mbar and 15øC:ÿ(Sanitary) mü/h 1.75 (2.54) Maximum absorbed electrical power: 114ÿWÿ Electric power absorbed at partial load: 86 W Heating/sanitary water content: 3.3/0.5 l Expansion tank content: 8 lt DHW delivery (T=38øC): 8.6 l/min Maximum working temperature: 85øC DHW delivery (T=25øC): 13.1 l/min Dimensions (hxlxp) mm 650 x 500 x 395 ; 37Kg Electrical Protection Degrees:ÿIPX4D Power supply: METHANE Features list CONDENSATION the environmentally friendly and energy saving technology.ÿCondensing boilers are clean and efficient: even the water vapor contained in the combustion products is used to generate heat. By making the most of the condensate, the energy to produce the desired heat is less, with the advantage of saving energy. In fact, condensing boilers reduce consumption by a final 30% and polluting emissions (NOx and CO2) by a final 70%, respecting the 'traditional' ones. LOVE ME Love me Oshima a Japanese tropical island: the new collection of condensing boilersÿRinnai is inspired by her. Love me because I'm perfect. It heats your home and, while doing so, it respects the environment with the lowest polluting emissions. And let us save money, ensuring a constant return for my entire life. Love me because I am at the forefront of technology, designed to be truly capable of improving your daily comfort. Love me because I will be able to surprise you, with all the domestic hot water you need. Instant type condensing gas heat generator for heating and domestic hot water production, complete with electronic display with regulation and self-diagnosis function, which can be combined with a digital remote control. LOVE ME: A stainless steel heartÿThe heartÿ of allÿRinnai boilers, the heat exchanger, in stainless steel. This, in combination with the inverted flame ceramic burner, guarantees the highest efficiency of all the boilers on the market (109.9% according to EN 677). All Rinnai Amami shima appliances have advanced electronics and the ability to modulate from very low powers such as to guarantee a constant operating curve, avoiding overheating and cooling of the premises. The production of DHW, in all models, is abundant and immediate, to safeguard comfort and save energy. The structure of Rinnai boilers is sound-absorbing, designed to minimize the sound impact on the house: measured in decibels, the noise produced by the boiler is the same as you can hear in a library. Energy classification: 4 STARS /4 ACS Rating: 3 STARS /3 Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.
€1.453,00
IMMERGAS Immergas Victrix Superior 32 Kw Condensing Gas Boiler Complete With Kit For LPG Fume Exhaust - New Erp
AVAILABLE TO ORDER IMMERGAS VICTRIX SUPERIOR 32 KW CONDENSING COMPLETE WITH KIT FOR LPG FUME EXHAUST - NEW ERP Technical features Product code: 3.025503 Type: INSTANT condensing boiler Energy efficiency Class A heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile: XL Rated useful power: 32 kW Hot water production (∆t 30 °C) l/min: 15.3 Nominal / (real) system expansion tank capacity liters 8.0 / (5.8) System expansion vessel pre-charge pressure bar 1.0 Head available with flow rate 1000 l/h kPa (m wc) 31.0 (3.16) Useful thermal power for hot water production kW (kcal/h) 32.0 (27,520) DHW adjustable temperature °C 30 - 60 DHW circuit minimum dynamic pressure bar 0.3 DHW circuit max pressure bar 10 Min. domestic hot water withdrawal 1.5 litres/min Characteristics Power supply V/Hz 230 - 50 Nominal absorption A 0.78 Power absorbed in stand-by W 5.5 Electrical insulation degree IP X5D Dimensions Dimensions (HxWxD): 835 x 440 x 350 VICTRIX SUPERIOR Low consumption: the modulating circulator automatically adapts operation to the conditions of use and reduces electricity consumption. Maximum domestic comfort: the 2-litre micro-accumulator speeds up hot water delivery and reduces waiting times compared to other instantaneous boilers. High seasonal yields: the wide modulation range of the boiler allows high seasonal yields with a consequent reduction in gas consumption. Display: large, backlit liquid crystal, provides the main operating information. Thermoregulators: optional. They improve comfort and increase energy savings. Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 5 (European Standards UNI 297 and 483): the best for reduced emissions of nitrogen oxides (NOX). Renewable energy: can be combined with solar systems. High flexibility: approved to operate indoors and outdoors in partially protected places. IPX5D electrical protection. Standard antifreeze up to -3 °C. OTHER CHARACTERISTICS: HIGH HYDRAULIC PERFORMANCE With the low energy consumption modulating circulator and the possibility of setting the ∆t on the system, these boilers are ideal on systems equipped with zone and thermostatic valves, to enhance the condensing operation of the appliance, reducing consumption energetic. HIGH EFFICIENCY IN ALL SEASONS Even in mid-season, when energy absorption is limited, efficiency is still high and running costs are reduced thanks to the modulation range from 12.5% to 100% of the power. TECHNOLOGY AND SIMPLICITY OF USE The large and functional backlit liquid crystal display allows easy reading of all the main information relating to operation. Two practical knobs allow you to control the appliance. § INSTALLATION FLEXIBILITY With 19 cm of space between the water connections and the wall, it can be easily installed in any replacement; moreover, the boilers are designed for internal or external installation in partially protected places. The standard antifreeze protection is down to -3 °C and can be extended, with a suitable optional kit, down to -15 °C. Warranty The guarantee on this article is 24 months from the date of purchase.
€2.598,00
IMMERGAS Immergas Victrix 32 Tt LPG Condensing Gas Boiler Complete With Fume Exhaust Kit - New Erp
AVAILABLE TO ORDER IMMERGAS VICTRIX 32 TT CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Immergas Victrix 32 TT condensing boiler Capacity: 32Kw Useful heating power kW: 30.0 DHW useful power kW: 31.5 Type: snapshot Modulation range: 15 - 100% Hot water production (∆t 30 °C) l/min: 15 , 0 Electrical protection degree IPX: 5D Dimensions (HxWxD): 748x440x280 mm Weight: 33Kg *For conversion to LPG, contact the Authorized Assistance Centre VICTRIX TT The VICTRIX TT ErP range, intended for new installations and above all for the replacement of existing appliances, has been designed to comply with the new European Directives on the use of energy, increasingly oriented towards condensing technology to more easily reach the efficiency classes high in space heating and in the production of domestic hot water in homes. VICTRIX TT ErP, produced in the new highly automated lines of the company's historic headquarters in Brescello, incorporates the innovative condensing module which guarantees high flow rate and head on the heating circuit, low risk of clogging due to any impurities in the system and greater corrosion resistance thanks to the special alloy with which it is made. Reduced consumption thanks to the class A circulator and boiler power modulation up to 15%: ideal condition for mid-seasons or reduced loads. In addition to a very low environmental impact, the boiler features an advanced and easy-to-use user interface with adjustment knobs, selection buttons and LCD display for viewing operating temperatures, operating status and error codes. HIGH HYDRAULIC PERFORMANCE The condensing module has been designed to have large water passages which allow interesting flow rate and head performance even on old heating systems. This also means a low risk of clogging in the presence of impurities in the system water. It is made of a special Aluminium-Silicon-Magnesium alloy, a material which – together with the high thicknesses used – is particularly resistant to corrosion. The water circuit runs through the exchanger in an ascending manner, in counter-current with respect to the flame. The dense pinning allows you to increase the exchange surface ensuring excellent water yield. It is important to keep the pH of the heating system filling water between 6.5 and 8.5 with a hardness of 15°F (ref. UNI 8065 - DI 26/06/15). CLASS A CIRCULATOR The low-consumption modulating circulator guarantees considerable savings in electricity compared to a traditional circulator, it can be set in Auto or Fixed operating modes. WIDE MODULATION RANGE The electronic card reduces operating costs thanks to particularly high yields even with low energy absorption, as occurs for example in the mid-seasons. In fact, the wide range of modulation of the appliance (from 15% to 100% of the thermal power) determines high seasonal yields. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W) EVOLVED DESIGN The VICTRIX TT ErP range is designed to make the work of professionals easier. Immergas has invested significant resources in the industrialization of the parts of the appliance, making it particularly robust and has paid the utmost attention to details and finishes. VICTRIX TT ErP presents new technical features such as: • safety valve drain conveyed to the condensate drain • removable cover for direct access to the electrical connection compartment • cover casing for the water connections to better position the boiler in domestic spaces DIRECT ACCESSIBILITY TO THE ELECTRICAL CONNECTIONS COMPARTMENT In the lower part of the boiler there is a connection compartment accessible without the need to open the product but simply by removing the aesthetic cover, to house the electrical connections of the main devices that can be combined (for example CARV2, external probe, CRONO 7). ELECTRONIC AIR/GAS CONTROL The electronic gas valve allows air/gas control by means of a multifunction electrode placed inside the combustion chamber; the car electronic card adapts the combustion parameters in the event of variations in the density of the air or of the fuel. This allows VICTRIX TT ErP to be powered with any type of fuel (methane/LPG or propane air), by intervening only on the electronic board software even at a later time (for example at the first commissioning by the Authorized Assistance Centre). The boiler is therefore supplied with a single product code. Product Guarantee The warranty on this item is 24 months from the date of purchase.
€1.433,00
BERETTA Gas Boiler Beretta Paros Green 30 Csi Condensing Complete With Methane Fume Exhaust Kit -New Erp
Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Heating/DHW operating characteristics -------------------------------------------------- -------------------------------------------------- ----------------------------- Nominal heat input 30 kW Nominal thermal power 29.13 kW Performance certification ★ ★ ★ ★ (Directive 92/42/EEC) Useful efficiency (80-60 °C): 97.1% Useful efficiency (50-30 °C): 104.6% Electric Power: 129W Expansion vessel capacity: 10 l Quantity of hot water with Δt=25°C: 17.2 l/min Minimum domestic water flow rate: 2 l/min Sanitary water temperature selection range: 35 - 60°C Dimensions (hxlxp) mm 846x452x365; 42kg Power supply: METHANE Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control) Paros Green The new Paros Green range offers high standards in terms of technology and standard equipment: 1:8 modulation ErP boilers with low consumption modulating pump (EEI≤0.20) modifiable up to 7m head The RANGE RATED certification makes it possible to adjust the heat input of the boiler to the effective heat requirement of the system Low polluting emissions: class 5 according to UNI EN 483 Patented condensing exchanger (Patent Pending) high flow aluminum Maximum Sanitary Comfort ★★★ required by Pr EN 13203 Efficiency ★★★★ according to European Directive EEC 92/42 Expansion tank 9 liters (mod.25 kW)/10 liters (mod.30 kW) Thermoregulation with standard external probe Standard hydraulic fitting cover For LPG gas conversion, contact the Assistance Centres Authorized Beretta technique Condensing exchanger The innovative condensing exchanger and the production process have allowed Beretta to file an application for a European Patent (Patent Pending). The exchanger is born in a single aluminum tube and without welding. The high thermal conductivity of the aluminum allows for a more uniform distribution of the temperature so as not to create overheating points for the benefit of a longer life of the exchanger. In addition, aluminum offers a high resistance to corrosion. The single pipe architecture (series circuit) allows obtaining a large section for the passage of water in the exchanger with the advantage of having low pressure drops and preventing both the deposit of limescale and impurities. 1:8 modulation The range offers a wide range of modulation to respond to real energy needs, while simultaneously offering a high reduction in consumption. Beretta realizes this system through a totally pneumatic and therefore safe and reliable model. The electronics in fact act only on the number of revolutions of the fan (inlet air flow rate) without intervening on the injection of the gas quantity which is automatically aspirated. Beretta therefore introduces a new double distribution mixer: a mechanical damper with a calibrated weight which opens or closes a part of the venturi section so as to divide the modulation range into two stages (smaller section with low air flow or larger with high air flow rates). Beretta has also developed a specific silencer in the air intake to reduce any resonances generated by the new mixer. Range Rated The term Range Rated identifies a product approved for different heat input levels and equipped with a device that allows you to adjust the heat input of the boiler according to energy requirements. In summary, Beretta is able to offer a boiler that responds to the request of the project through a simple calibration to be carried out during installation. In fact, it is sufficient to adjust the number of revolutions of the fan. There new heat capacity will be shown on a special plate on the machine. The control panel The New Paros Green are equipped with a simple and intuitive control panel. Two ergonomic knobs allow you to perform all the functions necessary for using the boiler. The selectors also allow activation of the Friendly Climate System and the Comfort Water System. Thanks to the display and the LEDs on the dashboard, information on the status of the appliance is immediately usable. Finally, filling the system with the practical tap can be checked using the hydrometer on the panel. Comfort Water System The New Paros Green CSI is designed to offer high comfort in the use of domestic hot water. The user has in fact the possibility of activating the Comfort Water System (indicated by the lighting of the yellow LED) using the appropriate selector. i.e. pre-heating. The Comfort Water System allows for greater speed in the delivery of domestic hot water, reducing waiting times. The advanced electronic control, the adoption of the fuximeter and the increased sanitary exchanger, allow the New Paros Green CSI to reach the ★★★ in sanitary comfort: the maximum foreseen by the Pr EN 13203. Beretta is “ERP”. The concrete commitment towards an eco-sustainable future The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015, the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class *. Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€1.466,00
BERETTA Gas Boiler Beretta Exclusive 30c Methane Condensing Complete With Fume Exhaust Kit - Erp
Energy label specifications according to the European directive ErP: Heating energy efficiency: Class A XL profile DHW energy efficiency: Class A (EXCLUSIVE plus only the BeSMART Wi-Fi Comfort Control (optional) forms a class A+ system) Characteristics of operation in heating and DHW: Heating thermal capacity kW 24.00 Nominal DHW heat input kW 30.00 Nominal thermal power (80°/60°) kW 23.54 Nominal thermal power (50°/30°) kW 25.56 QHE Annual Power Consumption GJ: 42W Sound power level, within LWA dB 53 NOx emissions: mg/kWh 33 Max heating pressure-temperature: bar-°C 3-90 Diaphragm expansion vessel capacity: 8 l Hot water quantity at: ΔT 25 K / ΔT 30 K / ΔT 35 K l/min 17.2 / 14.3 / 12.3 Electrical protection degree: IP X5D NOx emission class: 6 Dimensions HxWxD:740x420x275 mm; 37kg Power supply: methane NEW EXCLUSIVE EXCLUSIVE, A NEW STORY BEGINS. Through the innovative ACC electronic injection combustion, HYBRID READY integration and the new project design, EXCLUSIVE offers exclusive advantages in every installation variation. From the new EXCLUSIVE, A NEW STORY BEGINS. construction, redevelopment; from hybrid application in a multi-energy system to simple single installation, EXCLUSIVE represents the current and winning choice for those who are not satisfied and want to look beyond. Characteristics: Electronic injection combustion via ACC system EXCLUSIVE plus only the BeSMART Wi-Fi Comfort Control (optional) forms a class A+ system 94% (ETAs) of energy efficiency in heating Universal installation : Indoor, outdoor and recessed installation. IPX5D electrical protection degree Tempozero installation: Removing the casing NO longer necessary for electrical connections and calibration Low consumption modulating circulator (EEI≤ 0.20) 6 m head, electronically modifiable up to 7 m Hydraulic connections and external probe available as options Frost protection down to -5 °C as standard HYBRID READY boiler , Can be integrated via BUS in a multi-energy system to make boiler operation more effective in relation to other energy sources (can be combined with a Beretta hybrid system using the REC 10H interface available as an accessory) Talking display: User interface for direct communication using TEXT and ICONS Self-adapting: The boiler automatically adapts to different types of gas and installation - ZERO calibrations CO alarm Boiler CO level constantly monitored and calibrated for maximum safety Small size: Thanks to its compactness, EXCLUSIVE can also be easily installed in a wall unit LPG version selectable from parameter Gas transformation kit not necessary Europe strategy With the opening towards the management of multi-energy plants, the reduction of emissions and the optimization of consumption, Beretta signs with EXCLUSIVE the highest contribution in terms of respect for the environment, in view of the 20-20-20 objectives of the Union countries expected by 2020, reconfirming their commitment to an increasingly eco-sustainable future. Exclusive: a milestone in the evolution of Beretta Combustion and electronics, i.e. the heart and brain of EXCLUSIVE, entirely designed in the Research and Development Laboratories of the historic Lecco headquarters, mark a turning point in Beretta's mural evolution and are the result of the spirit of innovation that has distinguished the brand since its origins. With EXCLUSIVE, the novelty of the project fits perfectly into the tradition of know-how and takes on a linear design, which reworks some aesthetic lines of the first boiler models in a modern key, in perfect continuity of style. Continuity that is also manifested in the re-proposition of the EXCLUSIVE name, which has always characterized the top of the Beretta range, with exclusive features and advantages. Class A+ system using only the BeSMART WiFi Comfort Control (optional) . "talking" interface The control panel is one of the distinctive elements of EXCLUSIVE which confirms its innovative profile. In fact, there are many EXCLUSIVE functions, all to be discovered, through a modern 3.5” backlit LCD display, which communicates with the user through texts and icons. By means of the intuitive silk-screened operating keys it is also possible to access the settings and parameterizations of the boiler and the system. GREEN GEM OF EXCLUSIVE: LED light bar that signals the current operating status of the boiler, reflecting on the casing even with the door closed. Exclusive Features: HOURLY PROGRAMMING : Programmable heating by hour and by single zone INTELLIGENT SYSTEM FILLING Autonomous filling activation and total safety SYSTEM PRESSURE Displayed DATE AND TIME Display as screensaver PREHEATING Domestic hot water preheating activation SCHEDULED MAINTENANCE Intelligent system that warns the user when boiler maintenance is due Everywhere Exclusive: Thanks to BeSMART, Beretta's WiFi Comfort Control, controlling and managing home comfort is now possible wherever you are, through a simple and intuitive App, via smartphone and tablet. EXCLUSIVE is compatible with all BeSMART functions, even the most advanced. From home heating professionals, easy management of home comfort. Even away from home Electronic injection combustion The ACC system, designed and developed by Beretta, allows in all circumstances to offer "first class" functionality, efficiency and low emissions. Using a sensor for detecting the flame ionisation current, which allows the electronics to continuously modulate the quantity of fuel injected, the system keeps the air/gas mixture constant at optimal values over the entire modulation range of the delivered power. Thanks to the ACC system, combustion adjusts itself, thus eliminating the need for any calibration and allowing the boiler to operate with different gas compositions. Particular attention is paid to CO emissions, through a self-diagnosis that intervenes on the burner before the emission threshold allowed by the legislation is exceeded. [A] Cylindrical burner in stainless steel [B] Integrated electronic board [C] Traditional ga valve with modulator [D] Modulating fan with Hall effect Hybrid Ready EXCLUSIVE is a HYBRID READY solution. The boiler was born as a fundamental element of the offer of HYBRID READY products, which constitute the new hybrid technology system conceived and developed in the Beretta Research Laboratories. This system, created to meet the current and future needs of integration and governance of the various energy sources (Gas/Electricity/Renewables), also includes the most innovative methods of energy accumulation and distribution. EXCLUSIVE, AS A HYBRID READY SOLUTION, IS THE IDEAL CHOICE FOR THOSE WHO WANT TO LOOK AHEAD AND INVEST IN A PRODUCT WHICH WILL MAINTAIN ITS ITS VALUE UNCHANGED OVER TIME. Thanks to the new communication BUS with which it is equipped, EXCLUSIVE is able to interact perfectly with the Energy Manager REC 10H, a real thinking brain that constantly monitors the hybrid system created, to always offer the best comfort in an efficient and effective way. The Beretta hybrid, distinguishing itself for its modular approach to the world of multi-energies, is therefore able to offer increasingly tailored comfort and to evolve over time, with the inclusion of new components that increase efficiency Beretta is “ERP”. The concrete commitment towards an eco-sustainable future The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€1.534,00
BAXI Gas Boiler Baxi Duo-Tec Max+ 33 Ga LPG Condensing Complete With Fume Exhaust Kit - Erp
Overview BAXI DUO-TEC MAX+ 33 GA CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP 2015 Technical specifications ErP energy efficiency class (heating and DHW): A Load profile: XL Sanitary nominal heat inputkW 34ÿ Heating nominal heat input kW 28.9 Sanitary nominal thermal powerkW 33 Energy efficiency(92/42/CEE)ÿ**** Efficiency 100% Pn (80-60øC): 97.8% Efficiency 100% Pn (50-30øC): 105.8% Expansion/pre-charge capacity l/bar 8/0.8 Sanitary water temperature adjustmentøC 35-60ÿ Sanitary water production T 25øC l/min 18.9 Degrees of protection: IPX5Dÿ NOx class (EN 483) 5 Dimensions (hxwxd): 760 x 450 x 345ÿmmÿ; 39.5 kgs Power supply: LPG Features list Duo-Tec Max+ The new range of gas condensing boilersÿDuo-tec+ÿ has been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make it particularly suitable both for new buildings and for replacing an old generator. In fact, in addition to the already known advantages of condensing technology such as efficiency, energy saving and reduced polluting emissions, the new Duo-tec+ condensing boilers are characterized by: Complete range of models: heating only, with instantaneous DHW production, with integrated micro-storage tank, with integrated 40 liter storage tank. The range also includes the compact version (Compact+), the first Baxi condensing boiler in just 70 cm in height and 30 cm in depth. Digital control panel with backlit LCD display Wide range of 1:7 modulationÿreduction of on/off cycles translates into significant benefits in terms of energy savings and lower emissions digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, simple to use thanks to dedicated and independent keys for regulating the temperature of the domestic hot water and of the heating. The display allows you to view all the information and set the operating parameters in immediate change. Gas Adaptive Control The innovative automatic combustion control system GAC (Gas Adaptive Control) guarantees a wide modulation range of up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adapt the thermal power produced to the effective power dissipated by the building, thus avoiding excessive overheating/cooling of the building. Full modulation pumpÿ Can the circulation pump operate at maximum speed, at minimum speed in mode or automatic?: in the latter case, the speed (min./max) will be selected so that the heating delivery/return T remains constant at 20°C thus guaranteeing a significant reduction of pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also of maintenance costs Characteristics: *** of sanitary comfort(EN 13203) wide modulation ranges fine 1:7 greater efficiency and silence GAC (gas adaptive control): automatic control of combustion mini accumulator integrated in the expansion vessel (Baxi patent) digital control panel with large backlit LCD display high-efficiency circulation pump with total modulation antifreeze function IPX5D protection degree To be placed on the EU market, a productÿmustÿhave the brand,ÿthat is, comply with all the European Directives applicable to it.ÿ The ÿEcodesign and Labellingÿ Directives (eco-design and energy labelling) were created to help the EU achieve the objectives of the EU Plan 20-20-20, with a particular focus on reducing CO2 emissions by 20%, increasing energy efficiency 20% and the increase in the use of renewable energy by 20%, by 2020. For this reason, all heat generators for space heating, appliances for the production of DHW and systems of several of these appliances combined in combination will have to comply with the requirements for eco-design and be labelled, according to the quantity established by the implementing regulations, in order to be placed on the marketby producers. From 26 September 2015, the directives will affect all the products described above with a Pn 400 kW for eco-design and with a Pn 70 kW for labeling, destined for the markets of all countries of the European Economic Area. How is placing on the market Placing on the market is carried out by the manufacturer (by the importer from outside the EU) when the product remains available for the first time on the EU market.ÿThis happens when ownership changes to a distributor (invoice). ÿHow the placing on the market takes place Placing on the market is carried out by the manufacturer (by the importer from outside the EU) when the product remains available for the first time on the EU market.ÿThis happens when ownership changes to a distributor (invoice). ÿWhat products can be sold All products with CE marks placed on the market before 01/08 and 26/09 2015 are considered compliant and therefore salable until exhaustion. All products that will be placed on the market (sold) by the manufacturer/importer after these dates must comply with the new standards . What is a product according to ErP (Ecodesign) A device designed to operate at maximum efficiency with minimum environmental impact. To comply with this directive, the product must have Pnÿ 400 kW and as regards the hot water tanks, a volumeÿ 2000 litres. Manufacturers are obliged toÿplace on the marketÿonly ErP-compliant products with these deadlines: sinceÿAugust 1, 2015ÿonly products equipped with high efficiency pump fromÿ26 September 2015ÿonly products that meet the minimum ErP efficiency requirementsÿ Ecodesign defines the requirements that products must meet in order to be placed on the market, based on: Seasonal efficiencyÿfor heating and efficiency for DHW production based on the declared load profileÿ Emissionsÿ(NOx values)ÿ Maximum allowable noiseÿof hydronic heat pump outdoor unitsÿ What is a Combi product according to ErP An appliance (single with boiler) for heating and DHW production, already equipped with labeling with energy class information relating to a DHW loader profile. What is the energy label The labeling directive (2010/30/EU) requires the labeling of products according to a decreasing energy scale that goes from A + + + to GE An energy label is also provided for the installed system, depending on the components used (for example a boiler, DHW tank and room temperature controls). The label was created for the final consumer, providing real and comparable data, to make informed choices and targeting high-efficiency products. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.
€1.346,00
IMMERGAS Immergas Victrix Zeus Superior Condensing Boiler 32 Kw Methane With Boiler Complete With Fume Exhaust Kit - New Erp
IMMERGAS VICTRIX ZEUS SUPERIOR 32 KW METHANE CONDENSING BOILER WITH BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features Model: Wall mounted condensing boiler with 45 liter Boiler; Energy class in heating: A; Sanitary energy class: A; Sanitary load profile: XL; Heating power: 32.0 kW; DHW power: 25.8 kW; Hot water production (∆t 30 °C) l/min: 19.2; Nominal Current: 0.64A; Electrical insulation degree IP X5D; Heating performance: Nominal system expansion vessel capacity (min./max.): 10.0/7.1 L; Head available with flow rate 1000 l/h kPa (m wc) 29.0 (2.95); Healthcare services: Useful thermal power for hot water production (kcal/h) 32.0 (27520) kW; DHW temperature °C 20 - 60: Sanitary pressure 2.5 bar: Withdrawal in continuous service (∆t 30°C) litres/min 15.8; Specific flow rate x 10 min. (∆t 30°C) litres/min 19.2; Boiler losses kW 0.168; Nominal expansion vessel capacity liters 2.5 (1.2) Power supply: LPG. Benefits and functions: Display: backlit liquid crystal, provides the main operating information; It is possible to take advantage of the tax deductions in force; Low consumption, and can be combined as an optional with thermoregulators, which improve comfort and increase energy savings; 45 l kettle; Eco-compatible technology: in compliance with the ErP and ELD European Directives, it allows to achieve high energy efficiency classes in heating and hot water production; Ecological class 5: reduced emissions of nitrogen oxides. General characteristics Immergas boiler, easy to install in any environment and compatible with existing fittings and whirlpool tubs, designed to respect the environment while enjoying maximum comfort with low energy consumption given its low consumption circulator. Equipped with a 54 liter boiler made of stainless steel to be unalterable over time with minimal heat loss so as to resist even outdoors. The wide flange optimizes cleaning and maintenance operations, which allows excellent thermoregulation, guaranteeing very high performance in terms of comfort. Inside the boiler, in turn, there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange. The Zeus boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Dimensions (HxWxD): 900x600x460cm; Warranty The guarantee on this article is 24 months from the date of purchase.
€2.752,00
Riello Riello Start Ar 25 Kis LPG Condensing Boiler Complete With Smoke Kit -New Erp
RIELLO START AR 25 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT -NEW ErP Product code: 20101168 Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 25 kW Heating nominal heat output: 24.35 kW Sanitary nominal heat input: 25 kW Sanitary nominal thermal power: 25 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn max - Pn min (80°-60°) % 97.4-95.0 Profit return 30% (47th return) % 95.2 Sealed chamber, forced draught Electric power W 123 Quantity of hot water with Δt 25°C: 14.3 l/min Dimensions (hxlxp) mm 780 x 400 x 332 ; 40 Kg Electrical protection degree: IP X5D Power supply: LPG START AR Yield **** Combined models Start AR is the condensing boiler specifically designed to work with high temperatures and therefore with radiator systems; it is specially designed to have a reduced formation of condensate with system return temperatures above 50°C. It is available in powers of 25 and 29 kW. Characteristics: Low consumption circulator (IEE≤0.20) Climatic regulation managed directly by the boiler control unit Assembly template, hydraulic fittings, power supply cable supplied ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of “ Energy related Products ” (products connected to the use of energy) and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design ("eco-design "). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players. The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of sanitary water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range. In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€669,00
Argo Argo Condensing Boiler Mod. Condensy Smart Plus 24 Kw Complete With Smoke Kit
ARGO condensing BOILER mod. CONDENSY SMART PLUS 24 kW complete with smoke kit Heating/DHW energy efficiency class: Class A Load profile: XL DHW/heating nominal heat input: 24./20.6 kW Sanitary nominal thermal power: 24 kW Expansion vessel water capacity: 8 litres Sanitary water production ΔT 25°C: 13.8 l/min Minimum water flow rate of the DHW circuit: 2.0 l/min Rated Electric Power: 85W Degree of protection: IPX5D Power supply: methane ARGON The new range of Condensy Plus 24-33 boilers consists of 2 models with instantaneous domestic hot water production. It was especially designed to be used when replacing with an older generation boiler. Everyone is aware of the advantages of condensing technology, i.e. high combustion efficiency and consequently energy savings and above all very low polluting emissions. 1:7 Very high modulation Greater efficiency given by a reduced number of switching on and off, the high modulation ratio in fact allows a significant reduction in consumption up to 10% and consequently an equal reduction in polluting emissions. The adjustment of the thermal power with respect to the dissipated power also prevents the generation of excessive overheating/cooling of the rooms. GAC system Condensy boilers are equipped with an innovative electronic management system which, thanks to the new electronics and the new electronic gas valve, guarantees automatic combustion control to maximize consumption reduction during all operating periods. The advantages are: • No manual intervention • Reduced measurement, calibration or nozzle changes • Self-adaptation to the gas quality and the length of the flue gas pipes to keep the efficiency constant • The boiler regulates itself to reduce gas consumption and pollution thanks to the constant control of emissions Digital control panel In the new Condensy Plus, there is a digital control panel with a backlit LCD display, very intuitive and simple to use thanks to the symbols silk-screened on the keys. The display shows all the information and settings of the operating parameters in a clear and direct way. 2-speed modulating pump with de-aeration The circulation pump of the Condensy Plus can operate at maximum or minimum speed or in "automatic": in the latter case, the speed (min./max) will be determined by the electronics which will have the task of maintaining a constant °C the delivery/return ΔT in heating, ensuring a significant reduction in pump consumption and also in maintenance costs, due to the lower mechanical stresses of a "normal pump" which always runs at maximum speed. When the boiler is switched on for the first time, it is possible to use the semi-automatic de-aeration function: by pressing the 2 keys for a few seconds, the function is activated which allows the elimination of the air present in the heating circuit. This avoids possible blockages of the boiler, overheating of the system and mechanical breakdowns. The electronic card will activate a 10 minute on/off cycle of the pump. The function will stop automatically at the end of the cycle. Condensy Smart Plus Wall-mounted condensing boiler with instant domestic hot water production Digital control panel with backlit LCD display Wide 1:7 modulation range; greater efficiency for fewer turns on and off Automatic combustion control for constant maintenance of maximum efficiency values - GAC (Gas Adaptive Control) Complete soundproofing of the generator Standard climate control (with external probe available as an option) Arrangement for connection to a zone system Arrangement for integration with solar system Premix burner in AISI 316L stainless steel Water/fume exchanger in AISI 316L stainless steel, with integrated condensate collection tray Modulating fan with electronic speed variation Electric three-way diverter valve Increased DHW heat exchanger in stainless steel which facilitates condensation even in DHW operation Automatic by-pass Low consumption circulation pump and built-in deaerator Heating circuit safety valve at 3 bar Turbine flowmeter for greater comfort for the production of domestic hot water Safety thermostat against overheating of the water/fumes exchanger Safety thermostat against overheating of the water/fumes exchanger Water circulation safety hydraulic pressure switch NTC safety probe against fume overheating Temperature control with NTC probes Total antifreeze device Pump anti-blocking system and three-way valve which intervenes every 24 hours Pump post-circulation lasting 3 minutes which is activated in the heating function and after the main burner has switched off due to the intervention of the room thermostat. Heating circuit digital pressure gauge (system pressure indication on the display) Electronic thermometer
€579,50