The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 26 CS/1-5 Article code : 0010022020 Power supply: methane or LPG Performance Heating power : 3.0 ~ 25.0 kW DHW power : 3.0 ~ 26.0 kW Withdrawal flow rate (ΔT = 30K) : 12.6 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 103.4% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 34.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 26 CS/1-5 CFI Article code : 0010022021 Power supply: methane or LPG Performance Heating power : 3.0 ~ 25.0 kW DHW power : 3.0 ~ 26.0 kW Withdrawal flow rate (ΔT = 30K) : 12.6 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 103.4% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 34.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart, they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can turn your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, using the Wi-Fi network you can quickly and extremely intuitively control and adjust the comfort of your home wherever you are vSMART is designed to ensure comfort and extreme simplicity of use and can be installed on the wall by connecting it to the mains or placed where you prefer using ordinary AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design, it integrates perfectly into any environment, allowing you to adjust your single system with a simple click and possibly the load of a domestic hot water tank. The benefits of vSMART are not limited to convenience. By using this product you will be able to drastically reduce the " start/stop " cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMI 26 CS/1-5 Article code : 0010025186 Power supply: methane or LPG Forced draft sealed chamber Performance Heating power : 3.0 ~ 25.0 kW DHW power : 3.0 ~ 26.0 kW Withdrawal flow rate (ΔT = 30K) : 16.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 97.7% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 20-litre stratified kettle Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x546 mm Weight : 43.3Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMI Unrivaled sanitary comfort with an integrated storage tank Always ecoTEC plus but with an extra hot water reserve The new ecoTEC plus VMI has been renewed to achieve a higher level of efficiency, always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The system consisting of a boiler with storage tank is simple to assemble : the first step is the installation of the actoSTOR CL wall-mounted storage tank equipped with the relative pipes supplied for domestic water, then the ecoTEC plus VMW wall-mounted boiler is hung on the storage tank . All the necessary material is available within the same packaging. The actoSTOR CL stratification storage tank guarantees the same performance as a 60-litre coil storage tank but with considerably smaller spaces . It is possible, via a parameter in the electronics, to exclude the functionality of the boiler by making the boiler work instantaneously, guaranteeing savings on gas consumption The most significant development of the product is the IoniDetect fuel gas detection system which, in combination with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology allows you to use the boiler with a mixture of gas containing up to 20% hydrogen The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, technician or user. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMI The perfect solution for heating and domestic hot water The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Boiler with integrated 20-litre storage tank A new additional 26 kW size is also available High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! The built-in unit is purchased separately. Technical Features Model : ecoINWALL Plus Product code : 0010017154 Energy efficiency class in heating: A Energy efficiency class in sanitary ware: A Performance Stars: ★★★★ Heating power: 5.2 kW ~ 25.1 kW Sanitary power: 5.2 kW ~ 25.6 kW Domestic hot water production (ΔT = 30K) 12.1 l/min ACS temperature regulation: 35°C ~ 60°C Hot water comfort stars: ★★★ Expansion vessel capacity: 8 litres NOx class : 5 Degree of protection: IPX5D Power supply: Methane Optional accessories Built-in box 0010030848 Installation data Flue gas connection diameter: 60/100 mm Possible diameter of exhaust gas outlets: 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic pipe diameter: 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 845x515x234 mm Empty weight: 35.5 kg Warranty extension to 7 years Vaillant ecoINWALL plus VMW built-in condensing wall-mounted boiler So discreet that it disappears into the wall ecoINWALL plus VMW is a 26 kW built-in wall-mounted boiler for domestic heating and domestic hot water production. With the combination of the convenient built-in, it allows for wall installation that disappears completely into the wall in just 25 centimetres. With this solution Vaillant responds to the needs of residential construction: limited space inside homes and aesthetic constraints that prevent the installation of exposed boilers on balconies and terraces. Since it is dedicated to the outside of the building, the boiler is equipped as standard with frost protection up to -15°C. From the display of the dedicated remote control, the user is able to carry out control, adjustment and reporting of any anomalies, remaining comfortably inside the home. Thanks to the pre-heating system and the NTC probes that monitor and prevent temperature changes, the boiler guarantees maximum comfort in domestic hot water and heating. The new modulating pump and the new stainless steel exchanger ensure great savings on electricity and gas consumption. Furthermore, combined with the multiMATIC 700 control unit, it allows you to refine the thermoregulation and further reduce management costs. ecoINWALL is not only the intelligent answer for modern installations, but a concentrate of performance, savings and technology that does not require any space inside homes. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoINWALL plus VMW The built-in solution, in the combined version Frost protection up to -15°C and IPX5D High sanitary comfort thanks to adjustable preheating Stainless steel exchanger Modulation 1:5 8 litre expansion vessel Vertical hydraulic connections Simplicity in replacing standard balcony boilers thanks to a complete range of accessories Automatic system loading function Thermoregulation with remote control as standard inside the home Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! Built-in unit is purchased separately. Technical features Model : ecoINWALL Plus Product code : 0010017154 Energy efficiency class in heating: A Sanitary energy efficiency class: A Performance Stars : ★★★★ Heating power : 5.2 kW ~ 25.1 kW DHW power : 5.2 kW ~ 25.6 kW Domestic hot water production (ΔT = 30K) 12.1 l/min DHW temperature adjustment : 35°C ~ 60°C Domestic hot water comfort stars : ★★★ Expansion vessel capacity: 8 litres NOx class : 5 Degree of protection : IPX5D Power supply: LPG Optional accessories Built-in box 0010030848 Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 845x515x234 mm Empty weight: 35.5 kg Warranty extension to 7 years Wall-mounted built-in condensing boiler Vaillant ecoINWALL plus VMW So discreet that it disappears into the wall ecoINWALL plus VMW is a 26 kW wall-mounted built-in boiler for domestic heating and the production of domestic hot water. With the combination of the convenient built-in feature, it allows for wall-mounted installation that is completely hidden in the wall in just 25 centimetres With this solution, Vaillant responds to the needs of residential construction: limited spaces inside homes and aesthetic constraints that prevent the installation of visible boilers on balconies and terraces. Being dedicated to the outside of the building, the boiler is equipped as standard with protection against frost down to -15°C. From the display of the specific remote control, the user is able to carry out the operations of control, regulation and signaling of any anomalies, remaining comfortably inside the house. Thanks to the pre-heating system and the NTC probes which monitor and prevent sudden changes in temperature, the boiler guarantees maximum comfort in domestic hot water and heating. The new modulating pump and the new stainless steel exchanger ensure great savings on electricity and gas consumption. Furthermore, combined with the multiMATIC 700 control unit, it allows to refine the thermoregulation and further reduce management costs. ecoINWALL is not only the smart answer for modern installations, but a concentration of performance, savings and technology that does not require any space inside the home. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoINWALL plus VMW The built-in solution, in the combined version Frost protection up to -15°C and IPX5D High DHW comfort thanks to settable pre-heating Exchanger in stainless steel Modulation 1:5 8 liter expansion tank Vertical hydraulic connections Simplicity in replacing standard balcony boilers thanks to a complete range of accessories Automatic system loading function Thermoregulation with standard remote control inside the house Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less