Discover our exclusive selection of Unical, perfect for enriching your home or workspace with style, comfort and functionality. Each piece is chosen to guarantee the best quality and satisfy your every need.
Unical
Unical Unical Kon M C24 Low Nox Condensing Gas Boiler Complete With LPG Fume Kit
GAS BOILER UNICAL KON M C24 CONDENSING LOW NOX COMPLETE WITH LPG FUME KIT Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power kW 23.6 Seasonal heating energy efficiency ambient ηs 92% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 12.7kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 87% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 4.2kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 96.7% Annual electricity consumption QHE GJ: 40 Heating energy efficiency. of water ηWH: 86% Daily fuel consumption Qfuel : 22.0 kWh Sound power level indoors Lwa dB(A) 51 Annual electricity consumption AEC: 400kWh Domestic hot water specific flow rate (Dt 30 °C): 11.2 l/min DHW production in cont. Dt 25 K (mixed): 13.2 l/min Expansion tank capacity: 8 lt Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345mm; 36.5kg KONm the latest generation of domestic condensing boilers by Unical, available in the version: instant combo heating only combinable with DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion The details of konm... Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility. Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.070,00€968,00
-
Unical Unical X 32 CA Condensing Low Nox 6 Boiler Complete With Methane Exhaust Kit In Stainless Steel - Erp
UNICAL X 32 C condensing boiler Low NOx 6 Complete with methane flue exhaust kit in stainless steel - ErP Technical data according to dir. ErP C24 Minimum/nominal useful power in condensing kW 33.6 - 5.4 Seasonal heating energy efficiency of environment ?s % 93 Seasonal EFFICIENCY CLASS for heating A Useful thermal power in high temperature regime. (Tr 60°C / tm 80°C) P4 kW 31.2 Efficiency at nominal thermal power in high temperature regime (Tr 60°C / Tm 80°C) ?4 % 87.7 Useful power at 30% of rated thermal power in low temperature regime (Tr 30°C) P1 kW 10.4 Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30°C) ?1 % 97.8 Declared load profile XL Sanitary seasonal EFFICIENCY CLASS A Production DHW cont. Dt 25 K (mixed) l/min 18.2 Expansion vessel capacity l 10 Max condensate production kg/h 5.2 Heating circuit pressure (min/max) bar 3.0 / 6.0 IP degree of protection X5D NO class x 6 Dimensions (HxWxD) mm 700x420x345 Net weight kg 41 x X like INOX, like the exchanger which is the engine of this wall-mounted condensing boiler. X is available in the instantaneous combined version (13.2 l/min), it runs on both methane and LPG (conversion kit supplied). Characteristics: Premix Low NOx burner (Class 6) IPX5D (also for outdoors) Compact dimensions and compatible with other Unical models (ideal for replacements) Template and unified connections (Unical KONm / KONe ) Minimum thermal power regulation in heating function Electronic antifreeze for operation down to -15 Management of 2 zones with differentiated priorities (high and low temperature) Electronics with HWS "Hot Water Speed" function to eliminate the delay in DHW production and automatic "air vent" function Layout conceived with large spaces for easy maintenance Wide choice of accessories including: - both modulating and on/off control thermostats - external probe for managing both the boiler and one or two high/low temperature zones STAINLESS STEEL EXCHANGER MONOSPIRAL WITH OVAL SECTION WITHOUT WELDING GREATER COMBUSTION VOLUME LESS EMISSIONS / HIGHER PERFORMANCE OPTIMIZED PRESSURE DROP REDUCTION OF DEPOSITS LESS NOISE LONGER DURATION OVER TIME FRONT ACCESS FOR EASY MAINTENANCE Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.250,00€1.120,00
-
Unical Unical KON M C28 Low NOx Methane Condensing Boiler Complete with Flue Gas Exhaust Kit
UNICAL KON M C28 kW CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power in condensing 28.9 Seasonal heating energy efficiency ambient ηs 93% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C) 15.8 kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) : 88.4% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 5.3 kW Domestic hot water specific flow rate (Dt 30 °C) ''D'' 13.0 DHW production in cont. Dt 25 K (mixed) -/15.5 IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345mm; 36.5kg KONm KONm the latest generation of domestic condensing boilers by Unical, available in the version: combined instantaneous heating only that can be combined with the DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion. Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. “Quick release” condensate drain manifold Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to guarantee high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.470,00€1.333,00
-
Unical AREA OCCASIONI Caldaia UNICAL X 24 C a condensazione Low NOx 6 Completa di kit scarico fumi metano in acciaio INOX - ErP
ATTENZIONE IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO: SEGNI DI RIPARAZIONE E SALDATURA AD UNA TUBAZIONE INTERNA IMBALLO USURATO (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). Caldaia UNICAL X 24 C a condensazione Low NOx 6 Completa di kit scarico fumi metano in acciaio INOX - ErP Dati tecnici secondo dir. ErP C 24 Potenza utile minima/nominale in condensazione kW 5 ÷ 25,2 Efficienza energetica stagionale del riscald. d’ambiente ηs % 91 CLASSE DI EFFICIENZA stagionale per riscaldamento Potenza termica utile in regime di alta temp. (Tr 60°C / tm 80°C) P4 kW 23,2 Rendimento alla potenza termica nominale in regime di alta temperatura (Tr 60°C / Tm 80°C) η4 % 87,0 Potenza utile al 30% delle potenza termica nominale in regime di bassa temperatura (Tr 30°C) P1 kW 7,7 Rendimento al 30% delle potenza termica nominale in regime di bassa temperatura (Tr 30°C) η1 % 96,1 Emissioni di ossidi di azoto rif. PCS NO x mg/kWh 22 Profilo di carico dichiarato XL CLASSE DI EFFICIENZA stagionale sanitaria Produz. A.C.S. in cont. Dt 25 K (miscelata) l/min 13,2 Capacità vaso espansione l 10 Produzione di condensa max kg/h 3,86 Pressione del circuito di riscaldamento (min/max) bar 0,5 / 3,0 Pressione del circuito sanitario (min/max) bar 0,5 / 6,0 Grado di protezione IP X5D Classe di NO x 6 Dimensioni (AxLxP) mm 700x420x345 Peso netto kg 34 X X come INOX, come lo scambiatore che costituisce il motore di questa caldaia murale a condensazione. X è disponibile in versione combinata istantanea (13,2 l/min), funziona sia a metano che a GPL (kit di trasformazione a corredo). Caratteristiche: Bruciatore Premix Low NOx (Classe 6) IPX5D (anche per esterno) Dimensioni compatte e compatibili con altri modelli Unical (ideale per sostituzioni) Dima ed attacchi unificati (Unical KONm / KONe ) Regolazione potenza termica minima in funzione riscaldamento Antigelo elettronico per funzionamento fino a -15 Gestione 2 zone a priorità differenziata (alta e bassa temperatura) Elettronica con funzione HWS “Hot Water Speed” per eliminare il ritardo in produzione A.C.S. e funzione “sfiato aria” automatico Layout concepito con ampi spazi per manutenzione facilitata Ampia scelta di accessori fra cui: - termostati di comando sia modulanti che on/off- sonda esterna per la gestione sia della caldaia che di una o due zone alta/bassa temperatura SCAMBIATORE IN ACCIAIO INOX MONOSPIRALE A SEZIONE OVALE PRIVO DI SALDATURE MAGGIOR VOLUME DI COMBUSTIONE MENO EMISSIONI / MAGGIOR RENDIMENTI PERDITE DI CARICO OTTIMIZZATE RIDUZIONE DEI DEPOSITI MINOR RUMOROSITÀ MAGGIOR DURATA NEL TEMPO ACCESSO FRONTALE PER MANUTENZIONE AGEVOLATA Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€715,00
-
Unical AREA OCCASIONI Caldaia a Condensazione Unical KON M C24 Low NOx Metano Completa di kit Scarico Fumi
ATTENZIONE IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO: DANNEGGIAMENTI SULLA PARTE SUPERIORE BOZZATURA LATERALE DESTRO PICCOLO DANNEGGIAMENTO AL LATERALE SINISTRO IMBALLO USURATO (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). CALDAIA A GAS UNICAL KON M C24 A CONDENSAZIONE LOW NOX COMPLETA DI KIT FUMI METANO Modello: KONm 24C Efficienza Energetica: Classe di efficienza stagionale per riscaldamento A Profilo di carico dichiarato: XL Classe di efficienza stagionale sanitaria: A Dati tecnici: Potenza utile nominale kw 23,6 Efficienza energetica stagionale del riscald. d’ambiente ηs 92% Potenza termica utile in regime di alta temp. (Tr 60 °C / tm 80 °C): 12,7kW Rendimento alla potenza termica nominale in regime di alta temperatura (Tr 60 °C / Tm 80 °C) η4: 87% Potenza utile al 30% delle potenza termica nominale in regime di bassa temperatura (Tr 30 °C): 4,2kW Rendimento al 30% delle potenza termica nominale in regime di bassa temperatura (Tr 30 °C) η1: 96,7% Consumo elettricità annuale QHE GJ: 40 Efficienza energetica di riscald. dell’acqua ηWH: 86% Consumo quotidiano di combustibile Qfuel : 22.0 kWh Livello di potenza sonora all’interno Lwa db(A) 51 Consumo elettricità annuale AEC: 400kWh Portata specifica acqua sanitaria (Dt 30 °C): 11,2 l/min Produzione A.C.S. in cont. Dt 25 K (miscelata): 13,2 l/min Capacità vaso espansione: 8 lt Pressione del circuito di riscaldamento (min-max): 0,5-3,0 bar Pressione del circuito sanitario (min-max): 0,5-6,0 bar Grado di protezione IP X5D Classe di NOx: 6 Dimensioni (HxLxP): 700x420x345 mm; 36,5kg KONm l’ultima generazione di caldaie domestiche a condensazione di Unical, disponibile in versione: combinata istantanea solo riscaldamento abbinabile a bollitore DSP 110 inox. KONm presenta tutte le “Quality Stars” per soddisfare ogni tipo di esigenza: Eccezionale rapporto di modulazione fino a 1:8 Rendimento >107% (ex dir. CE 92/42) Scambiatore primario in Al/Si/Mg ultrapiatto Elettronica con funzione HWS “Hot Water Speed” (vers. C) Low NOx (classe 5 secondo EN 297 e EN 483) grazie al bruciatore premix modulante Produzione di acqua calda fi no a 13,3 l/min Δt 25 con speciale scambiatore a 12 piastre (mod. 24 C) e 16 piastre (mod. 28/35 C) in acciaio inox Manutenzione “Pit stop” Pannello comandi semplice ed intuitivo Predisposta per le future applicazioni nei sistemi ed idonea a soddisfare i requisiti previsti nelle nuove norme di installazione Circolatore modulante ad alta efficienza Gestire 2 zone con 2 termostati KON m è versatile. Ideale per tutti gli impianti, grazie all’elettronica che permette di gestire 2 zone di riscaldamento a temperatura diversa (alta per radiatori e fan-coils, bassa per impianti a pannelli radianti) controllandole con termostati sia modulanti che on-off dedicati Post-circolazione anti surriscaldamento di 15 secondi, mantiene l’equilibrio termico tra la mandata ed il ritorno, anche dopo intensi prelievi di A.C.S., mentre in riscaldamento, con una durata di 5 minuti, permette di smaltire tutta l’inerzia termica residua. Funzionamento in temperatura scorrevole per la massima economia di gestione Protezione antigelo interviene a 5°C e si attiva sia in sanitario che riscaldamento, portando la temperatura in caldaia a 15°C. Si evita il rischio che KON m possa gelare se perdurano basse temperature nel locale ove è installata. Qualora si verifi chi la mancanza di gas si avrà la segnalazione di blocco sul display. Antibloccaggio pompa viene evitato il bloccaggio della pompa in seguito a lunghe soste grazie ad un impulso automatico di 5 secondi che l’elettronica lancia al motore ogni 24 ore di sosta. Funzione spazzacamino regolazione facile come non mai della combustione. Una pressione del tasto di sblocco per più di 5 secondi per ottenere il funzionamento alla minima o alla massima potenza per 15 minuti, per un’analisi accurata della combustione I dettagli di konm... Forte delle sinergie costruttive aziendali, KONm riassume alcuni aspetti delle serie di alta gamma come lo scambiatore primario in Al/Si/Mg a basso contenuto d’acqua di “Scuola Unical”, l’originale meccanismo di ispezione rapida delle parti vitali del sistema di combustione assieme all’ampiamente collaudato ma aggiornato complesso di elettronica e sistema di premiscelazione a controllo elettropneumatico già in uso su altre gamme. Una sobria risposta ad alto contenuto tecnologico “ErP Ready”, ideale per il consumatore che si approccia alle tecnologie ad alto recupero energetico e per l’installatore che richiede semplici ma non banali soluzioni nell’impiantistica di sostituzione o nelle nuove costruzioni a basso impatto ambientale. KONm è fi rmata Unical. Scambiatore esclusivo in Al/Si/Mg È realizzato in una speciale lega di Alluminio/Silicio/ Magnesio che ne assicura effi cienza e resistenza tanto che è garantito da Unical ben 5 anni. Grazie alla confi gurazione di scambio termico interno si raggiungono rendimenti superiori al 107% in regime di condensazione, che signifi cano per l’utente grande risparmio economico e ridottissimo impatto ambientale. Le versioni 28-35 sono adeguatamente maggiorate Circolatore modulante con disareatore Rappresenta lo stato dell’arte nello standard dell’alta effi cienza. In linea con la direttiva ErP del 2015, con meno di 1 W di consumo in stand-by e soli 45 W in funzionamento massimo, grazie all’ampia capacità di modulazione, in base alla richiesta del termostato ambiente e alle temperature rilevate dai sensori posti in mandata/ ritorno, dosa automaticamente la potenza della caldaia alle esigenze dell’impianto. Particolarmente silenzioso e compatto, si integra con la valvola di sicurezza, il by-pass ed il rubinetto di scarico. Ventilatore e Valvola gas elettropneumatica Il complesso di premiscelazione composto da elettrovalvola gas pneumatica e ventilatore modulanti si distingue per il limitato ingombro. Vantaggi: compattezza e silenziosità ampio range di modulazione 1:8 assoluta sicurezza d’esercizio per l’assenza di turbolenze basse sollecitazioni termiche e meccaniche, quindi lunga durata, grazie all’inalterabilità. La valvola è progettata per compensare le fl uttuazioni di pressione del gas presenti nelle reti nonché stabilizzare la pressione di alimentazione indipendentemente dalla pressione di aspirazione generata dal ventilatore del premix. La versione 28/35 è dotata di presa d’aria silenziata per migliorare la prestazione acustica ed anche di collettore aspirazione aria maggiorato. Facilmente regolabile, assicura una accurata miscela di combustione aria/gas per garantire elevati tenori di CO2 e favorire la condensazione con bassisssimi livelli di CO ed NOx . In sintesi il monoblocco si presta a facile manutenzione ed accessibilità. Pulizia scambiatore 1 minuto e 46 secondi! KONm è frutto dell’esperienza del Service e dei suggerimenti del mercato, da cui lo staff di progettisti Unical ha sintetizzato un complesso tecnologico facilmente assemblabile e rapidamente smontabile. Comandi intuitivi Il pannello elettronico di bordo risulterà immediatamente familiare. Non meno importante: tutte le operazioni di cablaggio e di intervento sono facilitate dal sistema di basculamento verticale. Il display LCD, a retroilluminazione temporizzata, multifunzione, permette: Lettura delle temperature in riscaldamento e sanitario Visualizzazione del blocco per mancanza di fi amma Stato di funzionamento/stand-by Diagnostica con segnalazione di 11 anomalie Manopola: stand-by, selettore modalità e regolazione riscaldamento 30 - 85°C Manopola regolazione sanitario 38 - 60°C Garanzia ProdottoTutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€865,00
-
Unical Climatizzatore Condizionatore Unical Trial Split Inverter serie AIR CRISTAL 10+10+10 con KMX4 36HE R-32 Wi-Fi Optional 10000+10000+10000
Caratteristiche TecnicheUnità interne:Modello Codice Catalogo Unità Interna : 3x KMUN 10HI Potenza: 9000 btu/h Capacità di Raffreddamento : 2,64 kW Capacità di Riscaldamento : 2,93 kW Aria Trattata : 521 m3/h Livello pressione Sonora : 20~37 dB(A) Diametro tubazioni Liquido : 6,35 mm (1/4") Diametro tubazioni Gas : 9,52 mm (3/8") Dimensioni Unità Interna (LxAxP) : 722x290x187 mm Peso Unità Interna : 7,4 Kg Wi-Fi Optional Unità Esterna:Modello: Codice catalogo Unità Esterna : KMX4 36HE Max unità interne: fino a 4 unità interne Efficienza Energetica: SEER : 6,5 SCOP : 4,0 Classe di Efficienza Energetica in Raffreddamento : A++ Classe di Efficienza Energetica in Riscaldamento : A+ Consumo energetico annuo in Raffreddamento : 565 kWh/a Consumo energetico annuo Riscaldamento : 3226 kWh/a Performance: Capacità Raffreddamento : 10,60 kW Capacità Riscaldamento : 11,10 kW Assorbimento Std Raffreddamento : 3,28 kW Assorbimento Std Riscaldamento: 2,82 kW Livello pressione sonora : 63 dB(A) Caratteristiche: Alimentazione (V/Hz/Φ) : 220~240/50/1 Gas refrigerante : R-32 Range temperature garantito: - Raffreddamento: -15° ~ 50° C - Riscaldamento: -15° ~ 24° C Dati Installativi: Diametro tubi Liquido : 6,35 mm (1/4") x4 Diametro tubi Gas : 9,52 mm (3/8") x3 + 12,70 mm (1/2") Lunghezza massima Tubazioni con carica Supplementare : 80 m Dislivello massimo Unità Interna / Unità Esterna : 15 m Dimensioni: Dimensioni Unità Esterna (LxAxP) : 946x810x410 mm Peso Unità Esterna : 69,0 Kg KMX-HE Unità Esterne Sistema di climatizzazione multi-combinazione “Inverter” ad elevate prestazioni e comfort in tutte le tipologie di ambientiIl sistema MULTI consente di ridurre gli ingombri di installazione all’esterno senza dover rinunciare al comfort ottimale dei locali interni da climatizzare. Una vasta gamma di unità esterne possono gestire da 2 fino a 5 unità interne di diversa tipologia e potenza. Qualora la somma delle potenze delle unità interne superi quella dell’unità esterna, il sistema ripartirà automaticamente la potenza totale tra le varie Unità Interne.Molteplici sono pertanto, le combinazioni possibili con la gamma MULTI.Le Unità esterne sono disponibili in 5 modelli con potenze diverse, abbinabili alle unità interne: a parete, a pavimento/parete, a cassetta o canalizzabile.Ciò consente una grande flessibilità impiantistica per soddisfare ogni esigenza residenziale e commerciale• Tecnologia DC Inverter, la modulazione progressiva continua permette al compressore rotativo di adeguare la potenza assorbita in funzione del numero di unità interne in richiesta e in funzione della temperatura impostata, ottenendo un risparmio di energia elettrica pari al 20% rispetto ai sistemi tradizionali• Pompa di calore anche con basse temperature esterne• Temperatura costante in ambiente, grazie alla modulazione della potenza del compressore• Valvole di espansione modulanti termoassistite: regolano la pressione del refrigerante per avere sempre la massima resa dal circuito frigorifero a seconda delle condizioni di lavoro dell’intero sistemaCombinazioni Multi UnicalEsempio : Impianto composto da 1 unità esterna e 4 unità interneair CRISTAL R32Design e tecnologia: un connubio vincente nella gamma di climatizzatori Unical airCRISTAL, che utilizzano il nuovo gas ecologico R32.Fascino tecnologicoL’esclusivo design dell’unità interna conferito dalle linee armoniose e arrotondate della scocca frontale, si arricchisce di un elegante profilo trasparente in PMMA e un “sotf display“ a scomparsa essenziale e discreto. In tal modo airCRISTAL può essere installato in sintonia con qualsiasi ambiente e arredamento, dal classico al più moderno.L’oscillazione automatica dei deflettori orizzontali e verticali crea “l’effetto 3D” che garantisce una migliore distribuzione dell’aria e il comfort ottimale in ambiente.Con la tecnologia “Full Inverter”, grazie alla modulazione controllata del compressore e dei ventilatori, si ottengono: Migliore rendimento stagionale e riduzione dei costi di elettricità Temperatura desiderata costante in ambiente Riduzione dei cicli di sbrinamento, causa di maggiori consumi Creare il comfort a distanzaInteragire con airCRISTAL anche a distanza: da oggi è possibile col proprio smartphone, una connessione Wi-Fi e una semplice chiavetta opzionale connessa alla porta USB della scheda di controllo del climatizzatore.Con una App semplice e intuitiva, è possibile impostare le modalità di funzionamento di airCRISTAL, programmare l’accensione e spegnimento anche tramite un timer giornaliero e/o settimanale, controllare i consumi di esercizio e il buono stato di funzionamento del climatizzatore. In questo modo airCRISTAL assicurerà sempre il massimo comfort ambiente in cui è installato rendendolo pronto a regalare una carezza di benessere. Funzione “Follow me” É esclusiva modalità che conferisce al telecomando la funzione di termostato: ciò garantisce l’effettivo raggiungimento della temperatura ambiente desiderata in modo preciso e veloce e un comfort a 360° sia in modalità riscaldamento (inverno) sia modalità raffrescamento (estate)Caratteristiche della serie: Elegante profilo in PMMA “Soft” display Gestione a distanza tramite wifi (opzionale) Sistema DC “Inverter” con modulazione progressiva continua per maggior risparmio energetico stagionale e miglior comfort in ambiente Funzione comfort “Follow me” Ventilatore a 6 velocità con selezione automatica Ventilatore Twisted Torsion ad elevata silenziosità Effetto 3D: movimento motorizzato dei deflettori per una migliore distribuzione dell’aria Funzione “1 W (Watt)” per eliminare sprechi di energia in stand-by Sistema elettronico di protezione preventiva di vari organi che si attiva ad ogni accensione Telecomando, di facile utilizzo, a raggi infrarossi con display a cristalli liquidi Funzione “check” per facilitare le operazioni di manutenzione Tasto di accensione di emergenza Autorestart Autodiagnosi Funzione “self cleaning” antimuffa, con asciugatura automatica della batteria interna Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€1.987,00
-
Unical Unical 00379018 Interface Control Wi-Fi Dongle for FLOWY Air Conditioner
Technical features Product code : 00379018 Compatible with: FLOWY Comfort at a distance Interact with FLOWY even remotely: from today it is possible with your smartphone, a Wi-Fi connection and a simple optional dongle connected to the USB port of the air conditioning control board . With a simple and intuitive App, it is possible to set the operating modes of airCRISTAL, program the switching on and off also through a daily and/or weekly timer, check the operating consumption and the good working condition of the air conditioner. In this way FLOWY will always ensure maximum comfort in the environment in which it is installed, making it ready to give a caress of well-being. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.
€50,00
-
Unical Unical Outdoor Unit Kmx3 21he Triall Split R-32 Multisplit Engine
Unical Outdoor Unit KMX3 21HE Trial Split R-32 Multisplit Motor Model: Catalog code Outdoor Unit : KMX3 21HE Max indoor units: up to 3 indoor units Energy efficiency: SEER : 6.1 SCOP : 4.0 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 328 kWh/a Annual energy consumption Heating : 1890 kWh/a Performance: Cooling Capacity: 6.30 kW Heating Capacity: 6.70 kW Std cooling absorption: 1.94 kW Std heating absorption: 1.80 kW Sound pressure level : 57 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24° C Installation Data: Pipe diameter Liquid : 6.35 mm (1/4") x3 Gas pipe diameter : 9.52 mm (3/8") x3 Maximum length of pipes with supplementary charge: 60 m Maximum height difference Indoor Unit / Outdoor Unit: 15 m Dimensions: External Unit Dimensions (WxHxD): 845x702x363 mm Weight of Outdoor Unit: 47.0 Kg
€638,79
-
Unical Unical Dual Split Inverter Floor Air Conditioner 12+12 With Kmx4 28he R-32 12000+12000
Technical features Indoor units: Model: Indoor unit catalog code : (x2) KMPS 12HI Nominal cooling capacity: 3.52 kW (12000 btu/h) Nominal thermal power : 4.41 kW (14000 btu/h) Air flow : 512 m 3 /h Sound pressure : 43 dB(A) Dimensions Indoor unit (LxHxP): 700 x 600 x 210 mm Indoor Unit Weight: 15 kg Outdoor Unit: Model: Indoor Unit Catalog Code : KMX4 28HE (28030 Btu/h) Max number of indoor units that can be connected: 4 Energy efficiency: SEER (W/W): 7.0 SCOP (W/W): 4.0 Cooling Energy Efficiency Class: A++ Heating Energy Efficiency Class: A+ Annual cooling/heating consumption: 420/2275kWh/a Performance Rated power output in cooling mode: 8.21kW Nominal absorbed power in cooling mode: 2.54kW Nominal heating power: 8.90 kW Nominal heating absorbed power: 2.22 kW Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R32 Pipe connections Liquid/Gas: 1/4”/ 3x3/8” + 1x1/2" cm Sound pressure: 60dB(A) Dimensions: External Unit Dimensions (LxHxP): 946 x 810 x 410 mm Weight of Outdoor Unit: 62 Kg MULTI Unical combinations Example : System consisting of 1 outdoor unit and 4 indoor units Optimal comfort in any environment Unical's MULTI systems make it possible to reduce outdoor installation dimensions without having to give up the optimal comfort of the indoor rooms to be air-conditioned. In fact, a wide range of outdoor units can manage from 2 up to 5 indoor units of different types and power. If the sum of the powers of the indoor units exceeds that of the outdoor unit, the system will automatically distribute the total power among the various Indoor Units. There are therefore many possible combinations with the MULTI range. The outdoor units are available in five models with different powers: this allows for great system flexibility to satisfy all residential and commercial needs. It is possible to install the internal unit with the power that best suits the size and shape of each room to be air-conditioned. The comfort in the room is guaranteed by: DC Inverter technology: continuous progressive modulation allows the rotary compressor to adjust the absorbed power according to the number of indoor units required and according to the set temperature, obtaining electricity savings of 20% compared to traditional systems. Heat pump even with low outside temperatures , thanks to the variable speed fan of the outdoor unit. Constant temperature in the room , thanks to the modulation of the compressor power which avoids annoying temperature swings typical of on/off systems. Thermo- assisted modulating expansion valves : regulate the pressure of the refrigerant to always have the maximum yield from the refrigeration circuit according to the working conditions of the entire system. Unical KMPS allows considerable energy savings thanks to inverter technology. Watchdog function which automatically restores regular operation in the event of microprocessor malfunctions due to sudden changes in voltage. For environments between 80 and 100 square meters. Particular care has been taken in the design of these machines with rounded and modern lines that have been designed for installation in elegant environments, either on the floor or on the ceiling. They are suitable for medium/large sized residential or commercial environments. The indoor unit is equipped with a large fin that allows the orientation of the main throw and a motorized oscillating deflector that allows a second positioning of the air flow using the remote control. The outdoor unit is equipped with “rotary” inverter compressors for the 18H, 24H models and “scroll” type compressors for the 36H, 48H and 60H models. The command and control electronic card, which is equipped with an Intronics microprocessor, is integrated with an important additional function called "Watchdog" which, in the event of a malfunction of the microprocessor due to sudden changes in voltage, automatically restores regular operation, thus avoiding dangerous current overloads to the microprocessor. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.870,00
-
Unical Unical Trial Split Inverter Cassette Air Conditioner 12+12+18 With Kmx4 28he R-32 12000+12000+18000
Technical features Indoor units: 1) Model: Indoor unit catalog code : (x2) KMCS 12HI Nominal cooling capacity: 3.52 kW (12000 btu/h) Nominal thermal power : 4.11 kW (14000 btu/h) Air flow : 620 m 3 /h Sound pressure : 43 dB(A) Dimensions Indoor unit (LxHxP): 570 x 570 x 260 mm Indoor Unit Weight: 16 kg 2) Model: Indoor unit catalog code : (x1) KMCS 18HI Nominal cooling capacity: 5.28 kW (18000 btu/h) Nominal thermal power: 5.43 kW (18500 btu/h) Air flow : 620 m 3 /h Sound pressure : 42 dB(A) Dimensions Indoor unit (LxHxP): 570 x 570 x 260 mm Indoor Unit Weight: 16 kg Outdoor Unit: Model: Indoor Unit Catalog Code : KMX4 28HE (28030 Btu/h) Max number of indoor units that can be connected: 4 Energy efficiency: SEER (W/W): 7.0 SCOP (W/W): 4.0 Cooling Energy Efficiency Class: A++ Heating Energy Efficiency Class: A+ Annual cooling/heating consumption: 420/2275kWh/a Performance Rated power output in cooling mode: 8.21kW Nominal absorbed power in cooling mode: 2.54kW Nominal heating power: 8.90 kW Nominal heating absorbed power: 2.22 kW Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R32 Pipe connections Liquid/Gas: 1/4”/ 3x3/8” + 1x1/2" cm Sound pressure: 60dB(A) Dimensions: External Unit Dimensions (LxHxP): 946 x 810 x 410 mm Weight of Outdoor Unit: 62 Kg MULTI Unical combinations Example : System consisting of 1 outdoor unit and 4 indoor units Optimal comfort in any environment Unical's MULTI systems make it possible to reduce outdoor installation dimensions without having to give up the optimal comfort of the indoor rooms to be air-conditioned. In fact, a wide range of outdoor units can manage from 2 up to 5 indoor units of different types and power. If the sum of the powers of the indoor units exceeds that of the outdoor unit, the system will automatically distribute the total power among the various Indoor Units. There are therefore many possible combinations with the MULTI range. The outdoor units are available in five models with different powers: this allows for great system flexibility to satisfy all residential and commercial needs. It is possible to install the internal unit with the power that best suits the size and shape of each room to be air-conditioned. The comfort in the room is guaranteed by: DC Inverter technology: continuous progressive modulation allows the rotary compressor to adjust the absorbed power according to the number of indoor units required and according to the set temperature, obtaining electricity savings of 20% compared to traditional systems. Heat pump even with low outside temperatures , thanks to the variable speed fan of the outdoor unit. Constant temperature in the room , thanks to the modulation of the compressor power which avoids annoying temperature swings typical of on/off systems. Thermo- assisted modulating expansion valves : regulate the pressure of the refrigerant to always have the maximum yield from the refrigeration circuit according to the working conditions of the entire system. Cassette air conditioners Elegantly effective Unical Air CASSETTE air conditioners are available in 5 models, all with inverter heat pump These machines, intended for recessed or false ceiling installation, are ideal for medium/large environments, such as bars, restaurants, large shops, meeting rooms, etc. The internal unit is enclosed by a completely insulated casing with a centralized fan which provides for the launch of the air through four vents located on the external sides and equipped with a special motorized deflector which distributes the air evenly and uniformly throughout the room. Installations in environments that often need to filter the air are favored, for example: restaurants, meeting rooms and smoking areas. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.145,00
-
Unical Unical Dual Split Inverter Air Conditioner Ductable 12+18 with KMX4 28HE R-32 12000+18000
Technical features Indoor units: 1) Model: Indoor unit catalog code : (x1) KMCN 12HI Nominal cooling capacity: 3.52 kW (12000 btu/h) Nominal thermal power : 3.81 kW (13000 btu/h) Air flow : 600 m 3 /h Sound pressure : 40dB(A) Dimensions Indoor unit (LxHxP): 700 x 450 x 200 mm Indoor Unit Weight: 27 kg 2) Model: Indoor unit catalog code : (x1) KMCN 18HI Nominal cooling capacity: 5.28 kW (18000 btu/h) Nominal thermal power : 5.58 kW (19000 btu/h) Air flow : 880 m 3 /h Sound pressure : 42 dB(A) Dimensions Indoor unit (LxHxP): 880 x 674 x 210 mm Indoor Unit Weight: 36 kg Outdoor Unit: Model: Indoor Unit Catalog Code : KMX4 28HE (28030 Btu/h) Max number of indoor units that can be connected: 4 Energy efficiency: SEER (W/W): 7.0 SCOP (W/W): 4.0 Cooling Energy Efficiency Class: A++ Heating Energy Efficiency Class: A+ Annual cooling/heating consumption: 420/2275kWh/a Performance Rated power output in cooling mode: 8.21kW Nominal absorbed power in cooling mode: 2.54kW Nominal heating power: 8.90 kW Nominal heating absorbed power: 2.22 kW Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R32 Pipe connections Liquid/Gas: 1/4”/ 3x3/8” + 1x1/2" cm Sound pressure: 60dB(A) Dimensions: External Unit Dimensions (LxHxP): 946 x 810 x 410 mm Weight of Outdoor Unit: 62 Kg MULTI Unical combinations Example : System consisting of 1 outdoor unit and 4 indoor units Optimal comfort in any environment Unical's MULTI systems make it possible to reduce outdoor installation dimensions without having to give up the optimal comfort of the indoor rooms to be air-conditioned. In fact, a wide range of outdoor units can manage from 2 up to 5 indoor units of different types and power. If the sum of the powers of the indoor units exceeds that of the outdoor unit, the system will automatically distribute the total power among the various Indoor Units. There are therefore many possible combinations with the MULTI range. The outdoor units are available in five models with different powers: this allows for great system flexibility to satisfy all residential and commercial needs. It is possible to install the internal unit with the power that best suits the size and shape of each room to be air-conditioned. The comfort in the room is guaranteed by: DC Inverter technology: continuous progressive modulation allows the rotary compressor to adjust the absorbed power according to the number of indoor units required and according to the set temperature, obtaining electricity savings of 20% compared to traditional systems. Heat pump even with low outside temperatures , thanks to the variable speed fan of the outdoor unit. Constant temperature in the room , thanks to the modulation of the compressor power which avoids annoying temperature swings typical of on/off systems. Thermo- assisted modulating expansion valves : regulate the pressure of the refrigerant to always have the maximum yield from the refrigeration circuit according to the working conditions of the entire system. Ductable air conditioners All equipped with wired control, they are intended for recessed installations in false ceilings. The internal unit is made of steel and is adequately insulated to avoid heat loss and the formation of condensation and at the same time to ensure suitable acoustic insulation. The fans of the indoor units, adjustable to 4 speeds, provide a high head. For the optimization and diversification of the air fl ows to be distributed, special “plenums” can be applied. Furthermore, the Internal Unit is supplied as standard with a pump to facilitate the disposal of the condensate, facilitating installation in the false ceiling Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.933,00
-
Unical Unical Konx Slim 24c Condensing Boiler Complete With Low Nox LPG Fume Exhaust Kit - Kon X News
Unical KON X SLIM 24C condensing boiler complete with low NOx LPG fume exhaust kit - New Minimum/nominal useful power in condensing kW 3.22 ÷ 23.7 Heating efficiency class A Declared load profile L Sanitary efficiency class A Efficiency at nominal thermal power in high temperature regime (Tr 60°C / Tm 80°C) η4 % 88.7 production DHW cont. Dt 25 K (mixed) l/min 13.2 Total expansion tank capacity l 9 (6+3) IP X5D degree of protection NOx class 5 Dimensions HxWxD mm 800x520x180 KON X SLIM KONx SLIM is a condensing boiler running on methane or LPG, with instantaneous production of domestic hot water. Covered with a satin finish AISI 304 stainless steel casing, it is ideal for outdoor installations, but equally elegant indoors. KONx SLIM is: Performant 24 and 35 kW (Range rated) Modulation ratio 1:8 Low NOx class 5 High energy efficiency A+ (System) the top of the category, >98% Hs (superior calorific value) Insulated and protected IP X5D, suitable for outdoor installation according to current standards (up to -15°C with antifreeze kit) Extremely compact with its depth of only 18 cm, Unical's record among wall-hung condensing boilers KONx SLIM, thanks to the RCh chronothermostat, OT multiprogram modulator, connected to the ambient and external probes supplied as standard, reaches seasonal efficiency equal to energy class A+ in heating. HWS "Hot Water Speed" is the new KONx SLIM electronics that switches from heating to DHW function with burner and pump always active, considerably improving user comfort who does not have to wait for hot water. Covered with a satin-finish AISI 304 stainless steel casing with a tapered-edge casing finish, KONx SLIM appears to have an essential and very elegant line, combining, with its hi-tech style, with the other appliances in the house Super small size depth of only 18cm Management of 2 temperature zones (high/low) by applying a second on/off thermostat Sliding temperature programmed to operate with the lowest possible delivery temperature to help save energy Intelligent system filling to guarantee functionality If the pressure is below 0.4 bar in the system circuit, the automatic water filling starts for 30 seconds once a day. If the request is repeated several times, a warning signal appears on the remote control Anti-overheating post-circulation automatically after the burner goes out, the boiler keeps the pump running for 5 minutes, preserving the components Chimney sweep function allows maintenance technicians to carry out the checks required by current standards in terms of efficiency and emissions Multigas operation (natural gas or LPG) with simplified switching Double expansion tank If necessary, it can mount an external auxiliary expansion tank (optional) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.548,00 - €1.890,00
