GAS BOILER UNICAL KON M C24 CONDENSING LOW NOX COMPLETE WITH LPG FUME KIT Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power kW 23.6 Seasonal heating energy efficiency ambient ηs 92% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 12.7kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 87% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 4.2kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 96.7% Annual electricity consumption QHE GJ: 40 Heating energy efficiency. of water ηWH: 86% Daily fuel consumption Qfuel : 22.0 kWh Sound power level indoors Lwa dB(A) 51 Annual electricity consumption AEC: 400kWh Domestic hot water specific flow rate (Dt 30 °C): 11.2 l/min DHW production in cont. Dt 25 K (mixed): 13.2 l/min Expansion tank capacity: 8 lt Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345 mm; 36.5kg KONm the latest generation of domestic condensing boilers by Unical, available in the version: instant combo heating only combinable with DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion The details of konm... Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility. Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less

UNICAL X 24 C condensing boiler Low NOx 6 Complete with methane flue exhaust kit in stainless steel - ErP Technical data according to dir. ErP C24 Minimum/nominal useful power in condensing kW 5 ÷ 25.2 Seasonal heating energy efficiency ambient ηs % 91 Seasonal EFFICIENCY CLASS for heating Useful heat output in high temp. (Tr 60°C / tm 80°C) P4 kW 23.2 Efficiency at nominal thermal power in high temperature regime (Tr 60°C / Tm 80°C) η4 % 87.0 Useful power at 30% of rated thermal power in low temperature regime (Tr 30°C) P1 kW 7.7 Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30°C) η1 % 96.1 Emissions of nitrogen oxides ref. PCS NO x mg/kWh 22 Declared load profile XL Sanitary seasonal EFFICIENCY CLASS Produc. DHW cont. Dt 25 K (mixed) l/min 13.2 Expansion vessel capacity l 10 Max condensate production kg/h 3.86 Heating circuit pressure (min/max) 0.5 / 3.0 bar DHW circuit pressure (min/max) bar 0.5 / 6.0 IP degree of protection X5D NO class x 6 Dimensions (HxWxD) mm 700x420x345 Net weight kg 34 x X like INOX, like the exchanger which is the engine of this wall-mounted condensing boiler. X is available in the instantaneous combined version (13.2 l/min), it runs on both methane and LPG (conversion kit supplied). Characteristics: Premix Low NOx burner (Class 6) IPX5D (also for outdoors) Compact dimensions and compatible with other Unical models (ideal for replacements) Template and unified connections (Unical KONm / KONe ) Minimum thermal power regulation in heating function Electronic antifreeze for operation down to -15 Management of 2 zones with differentiated priorities (high and low temperature) Electronics with HWS "Hot Water Speed" function to eliminate the delay in DHW production and automatic "air vent" function Layout conceived with large spaces for easy maintenance Wide choice of accessories including: - both modulating and on/off control thermostats - external probe for managing both the boiler and one or two high/low temperature zones STAINLESS STEEL EXCHANGER MONOSPIRAL WITH OVAL SECTION WITHOUT WELDING GREATER COMBUSTION VOLUME LESS EMISSIONS / HIGHER PERFORMANCE OPTIMIZED PRESSURE DROP REDUCTION OF DEPOSITS LESS NOISE LONGER DURATION OVER TIME FRONT ACCESS FOR EASY MAINTENANCE Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caldaia UNICAL X 32 C a condensazione Low NOx 6 Completa di kit scarico fumi gpl in acciaio INOX - ErP Dati tecnici secondo dir. ErP C 24 Potenza utile minima/nominale in condensazione kW 33,6 - 5,4 Efficienza energetica stagionale del riscald. d’ambiente ?s % 93 CLASSE DI EFFICIENZA stagionale per riscaldamento A Potenza termica utile in regime di alta temp. (Tr 60°C / tm 80°C) P4 kW 31,2 Rendimento alla potenza termica nominale in regime di alta temperatura (Tr 60°C / Tm 80°C) ?4 % 87,7 Potenza utile al 30% delle potenza termica nominale in regime di bassa temperatura (Tr 30°C) P1 kW 10,4 Rendimento al 30% delle potenza termica nominale in regime di bassa temperatura (Tr 30°C) ?1 % 97,8 Profilo di carico dichiarato XL CLASSE DI EFFICIENZA stagionale sanitaria A Produz. A.C.S. in cont. Dt 25 K (miscelata) l/min 18,2 Capacità vaso espansione l 10 Produzione di condensa max kg/h 5,2 Pressione del circuito di riscaldamento (min/max) bar 3,0 / 6,0 Grado di protezione IP X5D Classe di NO x 6 Dimensioni (AxLxP) mm 700x420x345 Peso netto kg 41 X X come INOX, come lo scambiatore che costituisce il motore di questa caldaia murale a condensazione. X è disponibile in versione combinata istantanea (13,2 l/min), funziona sia a metano che a GPL (kit di trasformazione a corredo). Caratteristiche:  Bruciatore Premix Low NOx (Classe 6) IPX5D (anche per esterno)  Dimensioni compatte e compatibili con altri modelli Unical (ideale per sostituzioni)  Dima ed attacchi unificati (Unical KONm / KONe )  Regolazione potenza termica minima in funzione riscaldamento  Antigelo elettronico per funzionamento fino a -15  Gestione 2 zone a priorità differenziata (alta e bassa temperatura)  Elettronica con funzione HWS “Hot Water Speed” per eliminare il ritardo in produzione A.C.S. e funzione “sfiato aria” automatico  Layout concepito con ampi spazi per manutenzione facilitata Ampia scelta di accessori fra cui: - termostati di comando sia modulanti che on/off- sonda esterna per la gestione sia della caldaia che di una o due zone alta/bassa temperatura SCAMBIATORE IN ACCIAIO INOX MONOSPIRALE A SEZIONE OVALE PRIVO DI SALDATURE MAGGIOR VOLUME DI COMBUSTIONE MENO EMISSIONI / MAGGIOR RENDIMENTI PERDITE DI CARICO OTTIMIZZATE RIDUZIONE DEI DEPOSITI MINOR RUMOROSITÀ MAGGIOR DURATA NEL TEMPO ACCESSO FRONTALE PER MANUTENZIONE AGEVOLATA Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Caratteristiche tecniche Modello : X 24 C Alimentazione : Metano Con kit di trasformazione a corredo Efficienza energetica Classe di efficienza energetica in riscaldamento : A Classe di efficienza energetica in ACS : A Profilo di carico : XL Performance Portata termica nominale in riscaldamento : 24,0 kW Potenza utile nominale : 23,0 kW Portata termica nominale in ACS : 28,0 kW Potenza utile nominale in ACS : 23,7 kW Potenza utile in condensazione nominale 30° ~ 50° C : 5,3 ~ 25,2 kW Rendimento utile a carico nomimale 60° ~ 80° C : 97,5 % Rendimento utile a carico nomimale 30° ~ 50° C : 105,0 % Efficienza energetica stagionale del riscaldamento d’ambiente : 93 % Produzione di ACS ΔT 25 : 16,2 l/min Capacità vaso espansione : 10 litri Produzione di condensa massima : 3,9 kg/h Pressione del circuito di riscaldamento : 3,0 bar Pressione del circuito di ACS : 6,0 bar Livello di pressione sonora : 43 Db(a) Grado di protezione : IP X5D Classe NOx : 6 Dimensioni e peso Dimensioni (AxLxP) : 700x420x345 mm Peso : 40,0 Kg Caldaia a condensazione Unical X X come INOX, come lo scambiatore che costituisce il motore di questa caldaia murale a condensazione. X è disponibile in versione combinata istantanea, funziona sia a metano che a gpl, con kit di trasformazione a corredo. Caratteristiche:  Bruciatore Premix Low NOx IPX5D anche per esterno Omologata per funzionare con il 20% di idrogeno nel metano Dimensioni compatte e compatibili con altri modelli Unical. Ideale per sostituzioni Dima ed attacchi unificati Regolazione potenza termica minima in funzione riscaldamento  Antigelo elettronico per funzionamento fino a -15° C Gestione 2 zone a priorità differenziata, alta e bassa temperatura. Elettronica con funzione HWS “Hot Water Speed” per eliminare il ritardo in produzione A.C.S. e funzione “sfiato aria” automatico  Layout concepito con ampi spazi per manutenzione facilitata Ampia scelta di accessori fra cui:- Termostati di comando sia modulanti che on/off- Sonda esterna per la gestione sia della caldaia che di una o due zone alta/bassa temperatura Scambiatore in acciaio INOX Monospirale a sezione ovale Privo di saldature Grande volume di combustione basse emissioni ed alto rendimento Perdite di carico ottimizzate Riduzione dei depositi Bassa rumorosità Lunga durata nel tempo Accesso frontale per manutezione agevolata Garanzia prodotto : La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Caratteristiche teniche Modello : KON B 28 Alimentazione : Metano Efficienza energetica Classe di efficienza stagionale in riscaldamento : A Classe di efficienza stagionale in sanitario : B Profilo di carico : XL Performance Potenza utile minima : 4,56 kW Potenza utile nominale : 28,50 kW Portata termica minima : 4,40 kW Portata termica massima : 28,00 kW Potenza massima assorbita : 86 W Rendimento utile al 30% del carico : 108,5 % Temperatura di funzionamento in riscaldamento : 30° ~ 85° C Temperatura regolabile in sanitario : 25° ~ 65° C Produzione di A.C.S miscelata con Δt 25 : 16 l/min Classe di rendimento : ★★★★ Classe di NOx : 5 Grado di protezione : IP X4D Emissioni di ossido di azoto NOx : 58 mg/kwh Dimensioni e peso Dimensioni (AxLxP) mm 900x680x486 Peso : 70,5 Kg Accessori di serie La caldaia viene fornita completa di: Dima predisposizione attacchi in lamiera, ordinabile anche separatamente (cod. 00363171) N° 1 circolatore modulante N° 4 tasselli per fissaggio caldaia Vaso di espansione del circuito sanitario di 3 litri (montato) KON B La nuova forma del comfort Raffinata caldaia murale a condensazione, KON B, offre una nuova forma del comfort. Nel suo DNA ha la piattaforma tecnologica KON, integrata all’“accumulo” da 60 litri superfast, in acciaio INOX AISI 316 L. È concepita per garantire docce confortevoli con erogazione a temperatura costante e per lungo tempo, senza risentire di “variazioni” causate dall’inserimento di altre utenze. Con l’accumulo a 70°C si dispone di ben 50 litri di acqua ad alta temperatura, miscelabili con acqua fredda, che forniscono oltre 195 litri nei primi 10 minuti con Δt 25K. L’erogazione dopo la scarica del bollitore prosegue per mantenersi a 45°C costanti nel tempo. L’utente potrà scegliere ovviamente la temperatura di consegna mediante il comando a bordo del pannello. La preparazione del bollitore avviene in circa 10 minuti da freddo e la ricarica, a partire da 45°C, in meno di 6 minuti. Il sistema di priorità sanitaria si basa sul pluritestato complesso con valvola a 3 vie elettrica. Un binomio hardware e software effi cientissimo, che consente il funzionamento in alta e bassa temperatura a priorità differenziate, abbinata all’eccellente gruppo scambiatore-condensatore premix, fornisce velocità di messa a regime dell’impianto di riscaldamento ed elevatissimo risparmio. Particolare attenzione è stata posta inoltre, alla riduzione delle emissioni sonore nonché all’isolamento del bollitore per evitare inutili dispersioni. KON B, la protagonista firmata Unical. Risparmio con lo scambiatore primario esclusivo in Al/Si/MgKON B impiega, come tutti i prodotti di ”Scuola Unical” un originale scambiatore primario. È realizzato in una speciale lega di Alluminio/Silicio/Magnesio che ne assicura effi cienza e resistenza tanto che è garantito da Unical ben 5 anni. Grazie alla confi gurazione di scambio termico interno si raggiungono rendimenti fi no al 108,2% (ex dir. 92/42) in regime di condensazione, che signifi cano per l’utente grande risparmio economico e ridottissimo impatto ambientale, per il miglior sfruttamento del combustibile.Ampia modulazione di potenza Questa dote permette di determinare, grazie al termostato e ai sensori di bordo, la giusta potenza istantanea necessaria, riducendo i fenomeni di on-off responsabili degli elevati consumi. L’omologazione in banda di potenza (Range Rated) dà l’opportunità di fi ssare la potenza erogata adeguandola all’esigenza dell’impianto. Il sistema “ANTIFAST” riduce ulteriormente i cicli di accensione e spegnimento ottimizzando rese e costi. Si tratta di un ritardatore elettronico di accensione che interviene dopo lo spegnimento della caldaia per raggiunta temperatura. Vantaggi: Rapidità di messa a regime all’accensione. Riduzione dei cicli on-off con diminuzione dei consumi e dell’usura dei componenti. Bruciatore premix modulante A controllo elettropneumatico e a rapporto di combustione costante, il bruciatore tipo “Flat” assicura lunga durata grazie alle basse sollecitazioni termiche e meccaniche ed all’inalterabilità fi sica del tessuto in fi bra FeCrAlloy, oltre ad una propagazione ideale del calore per irraggiamento grazie alla sua struttura capace di sviluppare una fi amma particolarmente morbida e luminosa. Lo sblocco “Quick release” sia della piastra superiore che del fondo dello scambiatore, permette la rimozione completa del sistema di combustione assieme all’ampiamente collaudato ed aggiornato complesso di elettronica e sistema di premiscelazione. L’elettrovalvola gas pneumatica ed il ventilatore, entrambi modulanti, si distinguono per il limitato ingombro. Vantaggi: compattezza e ridotta emissione acustica ampio range di modulazione 1:6,3 assoluta sicurezza d’esercizio per l’assenza di turbolenze La valvola è progettata per compensare le fluttuazioni di pressione del gas presenti nelle reti nonché stabilizzare la pressione di alimentazione indipendentemente dalla pressione di aspirazione generata dal ventilatore del premix. Facilmente regolabile, assicura una accurata miscela di combustione aria/gas (Low NOx) per garantire elevati tenori di CO2 e favorire la condensazione. Circolatore modulante al alta efficienza con disareatore Rappresenta lo stato dell’arte nello standard dell’alta effi cienza. In linea con la direttiva ErP del 2015, con meno di 1W di consumo in stand-by e soli 45W in funzionamento al massimo, grazie all’ampia capacità di modulazione, in base alla richiesta del termostato ambiente e alle temperature rilevate dai sensori posti in mandata/ritorno, dosa automaticamente la potenza della caldaia alle esigenze dell’impianto. Nella preparazione del bollitore di acqua sanitaria concorre positivamente a velocizzare i tempi e a ridurre gli on/off del bruciatore. Particolarmente silenzioso e compatto, si integra perfettamente con la valvola di sicurezza, il by-pass regolabile ed il rubinetto di scarico. Dentro al bollitore Capacità di 60 litri di accumulo, completamente flangiato, facilmente ispezionabile e coibentato in polistirolo autoestinguente. Acciaio INOX AISI 316 L Disposizione del serpentino acqua-acqua in 2 spirali concentriche estraibili disposte nella parte inferiore del bollitore. Si ottiene così il massimo scambio termico con l’acqua fredda in ingresso, che viene iniettata da uno speciale rompi flusso il quale riduce la turbolenza nella zona superiore ove avviene il prelievo di acqua calda Lunghezza del serpentino primario: 13 metri Superfi cie di scambio: 0,85 m2 Tempo di caricamento da 12 a 74°C: 10 minuti circa Rubinetto di svuotamento Efficienza energetica di riscaldamento dell’acqua ηwh pari al 68,1% secondo la dir. Erp, che ne fa un bollitore in grado di sostenere impegnativi ed intensivi prelievi anche protratti nel tempo. L’anodo di magnesio preserva dalle correnti parassite l’integrità del bollitore e ne conferma la garanzia di 5 anni. Acqua sana grazie all’antilegionella: l’utilissimo programma elettronico automatico prevede, ogni 186 ore, un ciclo ad alta temperatura (70°) che “sterilizza” il bollitore impedendo qualsiasi proliferazione batterica. Garanzia prodotto : La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Condensing Boiler Unical eK! C 24 low NOx With Flue Gas Exhaust Kit Methane or LPG Nominal/min. heat output in heating/sanitary kW heating 24.0-3.0 / sanitary 24.0-3.0 Nominal/min. useful power in heating/sanitary kW heating 23.3-2.8 / sanitary 23.6-2.8 Useful power in condensation nominal/min. 50°- 30° kW 25,5 - 3,1 Useful efficiency at nominal/min. load 80°-60°(CE dir. 92/42) % 97.1 Useful efficiency at nominal/min. load 50°-30°(CE dir. 92/42) % 106.2 Seasonal space heating energy efficiency ηs % 92 Seasonal heating efficiency class A Useful thermal power in high temperature regime. (Tr 60°C / tm 80°C) P4 kW 23.3 Efficiency at nominal thermal power in high temperature regime (Tr 60°C / Tm 80°C) η4 % 87.4 Useful power at 30% of the nominal thermal power in low temperature regime (Tr 30°C) P1 kW 7.8 Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30°C) η1 % 97.4 Annual electricity consumption QHE GJ kWh 73 Declared load profile XL Water heating energy efficiency ηWH % 83 Daily fuel consumption Qfuel kWh 23.58 Seasonal health efficiency class A Production DHW in cont. Dt 25 K (mixed) l/min 13.1 Expansion vessel capacity 6 l Condensation production max kg/h 3.9 Sanitary circuit pressure (min-max) bar 0.9 / 6.0 Sound power level inside dB(A) 47 Degree of protection IP X5D NOx class 6 Available head at the base of the chimney min. / max. Pa 2 / 130 Net weight 28 kg eK! eK! is the wall-mounted condensing boiler , with a sealed combustion chamber, with a stainless steel exchanger and instantaneous production of domestic hot water. It stands out for its compact dimensions, with a depth reduced to 25 cm, making it ideal for both replacements and new installations, even in existing boiler boxes. The regulation system with Gas Adaptive technology, as standard, allows for self-calibration of combustion, facilitating first start-up and maintenance operations. eK! C 24 has a heating/sanitary thermal power of 24 kW, production of domestic hot water up to 13.1 l/min, operation with methane or LPG (supplied kit). Premix Low NOx Burner (Class 6) Approved for Ø 50 mm H2 split exhaust systems 20% (approved to operate with 20% hydrogen in methane) IPX5D (also for outdoor) Minimum thermal power regulation in heating function Electronic antifreeze for operation down to -15 °C Electronics with HWS “Hot Water Speed” function to eliminate the delay in ACS production and automatic “air vent” function C10 approved (with smoke anti-reflux clapet kit accessory) Wide choice of accessories STAINLESS STEEL EXCHANGER Optimized pressure drops thanks to the single coil (one-coil technology) Monospiral with oval section optimised for smoke exchange (asymmetric section) Double chamber for emissions/performance balancing Reduced footprint Rear quick release system Front access for easy maintenance Free from welding HIGH PERFORMANCE BURNER Made of conductive ceramic fiber The ceramic properties of the fibers, together with an innovative process in the field of combustion, make it highly conductive, self-supporting, resistant and highly porous with the following advantages: Long life thanks to the resistance of the fibres to high temperatures (over 1000 °C) Maximum silence due to the structure and porosity of the fibre High thermal insulation that allows at high surface temperatures a reduced heat transmission to the lower layers of the burner, increasing the life of the gaskets Flame stability, high degree of modulation and reduced polluting emissions thanks to the precision of the air-gas ratio self-regulation system. EXT version for outdoor use The eK! boiler is IPX5D as standard, with a high degree of protection. With the addition of the top (optional) , it can be installed outdoors with exhaust systems 60/100 coaxial. The accessories for external mounting complete the equipment: Antifreeze heater kit for siphon and pipes Attack cover kit Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase .

Read more less

UNICAL KON M C28 kW CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power in condensing 28.9 Seasonal heating energy efficiency ambient ηs 93% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C) 15.8 kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) : 88.4% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 5.3 kW Domestic hot water specific flow rate (Dt 30 °C) ''D'' 13.0 DHW production in cont. Dt 25 K (mixed) -/15.5 IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345 mm; 36.5kg KONm KONm the latest generation of domestic condensing boilers by Unical, available in the version: combined instantaneous heating only that can be combined with the DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion. Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. “Quick release” condensate drain manifold Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER UNICAL KON M C35 CONDENSING + FUME KIT - ErP KONm the latest generation of domestic condensing boilers by Unical, available in the version: instant combo heating only combinable with DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion. The details of konm... Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. “Quick release” condensate drain manifold Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER UNICAL KON M C24 CONDENSING LOW NOX COMPLETE WITH LPG FUME KIT Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power kW 23.6 Seasonal heating energy efficiency ambient ηs 92% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 12.7kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 87% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 4.2kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 96.7% Annual electricity consumption QHE GJ: 40 Heating energy efficiency. of water ηWH: 86% Daily fuel consumption Qfuel : 22.0 kWh Sound power level indoors Lwa dB(A) 51 Annual electricity consumption AEC: 400kWh Domestic hot water specific flow rate (Dt 30 °C): 11.2 l/min DHW production in cont. Dt 25 K (mixed): 13.2 l/min Expansion tank capacity: 8 lt Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345mm; 36.5kg KONm the latest generation of domestic condensing boilers by Unical, available in the version: instant combo heating only combinable with DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion The details of konm... Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility. Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less

UNICAL X 32 C condensing boiler Low NOx 6 Complete with methane flue exhaust kit in stainless steel - ErP Technical data according to dir. ErP C24 Minimum/nominal useful power in condensing kW 33.6 - 5.4 Seasonal heating energy efficiency of environment ?s % 93 Seasonal EFFICIENCY CLASS for heating A Useful thermal power in high temperature regime. (Tr 60°C / tm 80°C) P4 kW 31.2 Efficiency at nominal thermal power in high temperature regime (Tr 60°C / Tm 80°C) ?4 % 87.7 Useful power at 30% of rated thermal power in low temperature regime (Tr 30°C) P1 kW 10.4 Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30°C) ?1 % 97.8 Declared load profile XL Sanitary seasonal EFFICIENCY CLASS A Production DHW cont. Dt 25 K (mixed) l/min 18.2 Expansion vessel capacity l 10 Max condensate production kg/h 5.2 Heating circuit pressure (min/max) bar 3.0 / 6.0 IP degree of protection X5D NO class x 6 Dimensions (HxWxD) mm 700x420x345 Net weight kg 41 x X like INOX, like the exchanger which is the engine of this wall-mounted condensing boiler. X is available in the instantaneous combined version (13.2 l/min), it runs on both methane and LPG (conversion kit supplied). Characteristics: Premix Low NOx burner (Class 6) IPX5D (also for outdoors) Compact dimensions and compatible with other Unical models (ideal for replacements) Template and unified connections (Unical KONm / KONe ) Minimum thermal power regulation in heating function Electronic antifreeze for operation down to -15 Management of 2 zones with differentiated priorities (high and low temperature) Electronics with HWS "Hot Water Speed" function to eliminate the delay in DHW production and automatic "air vent" function Layout conceived with large spaces for easy maintenance Wide choice of accessories including: - both modulating and on/off control thermostats - external probe for managing both the boiler and one or two high/low temperature zones STAINLESS STEEL EXCHANGER MONOSPIRAL WITH OVAL SECTION WITHOUT WELDING GREATER COMBUSTION VOLUME LESS EMISSIONS / HIGHER PERFORMANCE OPTIMIZED PRESSURE DROP REDUCTION OF DEPOSITS LESS NOISE LONGER DURATION OVER TIME FRONT ACCESS FOR EASY MAINTENANCE Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

UNICAL KON M C28 kW CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power in condensing 28.9 Seasonal heating energy efficiency ambient ηs 93% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C) 15.8 kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) : 88.4% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 5.3 kW Domestic hot water specific flow rate (Dt 30 °C) ''D'' 13.0 DHW production in cont. Dt 25 K (mixed) -/15.5 IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345mm; 36.5kg KONm KONm the latest generation of domestic condensing boilers by Unical, available in the version: combined instantaneous heating only that can be combined with the DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion. Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. “Quick release” condensate drain manifold Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to guarantee high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less