Midea Trial Split Inverter Air Conditioner PRIME 9+12+12 series with M3O-27NF8 R-32 9000+12000+12000 btu 1) Model Product code MA2-09NXD0 Power 9000 btu Dimensions WxDxH mm 805x205x285 mm 2) Model Product code 2x MA2-12NXD0 Power 12000 btu Dimensions WxDxH mm 805x205x285 mm OUTDOOR UNIT: Catalog number: M3O-27FN8-Q Gases: R-32 Max indoor units that can be combined: 3 Power (V/Hz/Φ) : 220~240/50/1 Capacity: Cooling down Nominal Capacity kW: 7.91 Absorbed power (Max): W 2460 SEER Seasonal Energy Efficiency: 6.6 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 425 Heating Nominal Capacity kW: 8.21 Absorbed power (Max): W 2250 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1960 Performance: Outdoor Unit Air Flow: m3/h 2700 External Unit Sound Pressure Max (dB(A)): 59 Sound power (Max) dB(A): 65 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxDxH) (mm): 845x363x702 ; 53 kgs Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit Relevant Features: - "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability - High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. - Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. - Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP Index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA Prime The geometries used for the splits of the PRIME range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Internal fan rotation speed linear regulation The rotation speed of the internal fan, beyond the usual predefined activity levels, can be adjusted within the values ​​1-100%: Follow me function Prime series remote controls are equipped with a temperature sensor which the unit considers as "ambient" temperature. In fact, by setting the Follow me function, the appliance is able to "follow the real temperature perceived by the user, guaranteeing maximum comfort. Condensation control The units can work in cooling mode even with a low external temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Refrigerant leak alarm If the temperatures in the refrigerant circuit are irregular due to leaks, a specific fault code (EC) allows you to identify this condition. emergency function In the event of failure of one of the product's sensors, operation can continue in Emergency mode until the faulty part is replaced. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. Super cool function The Super Cool function is a real hallmark of PRIME air conditioners: activated by simply pressing a button, this particular mode maximizes the rotation speed of the internal fan, thus increasing the flow of cold air and allowing the appliance to reduce the temperature to 17°C as quickly as possible Gear function The Prime units are equipped with the GEAR function which offers the user the possibility of independently managing the power supplied by the unit, choosing one of the 3 different levels: 50%, 75% and 100%. In this way you can disregard the classic settings by concentrating solely on the "gear" in which you want the unit to operate: first, second or third. ECO function The Midea Prime series units are equipped with a special iECO mode which allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners "Do Not Disturb" mode By pressing a button on the remote control, Prime can enter DO NOT DISTURB mode, thus silencing all acoustic warnings, turning off the indoor unit display and optimizing the silence of the indoor fan. "Diamond" Outdoor Unit The external units feature a unique diamond cut shape with no visible screws on the face of the unit Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Midea Trial Split Inverter Air Conditioner PRIME 9+9+12 series with M3O-27NF8 R-32 9000+9000+12000 btu 1) Model Product code 2x MA2-09NXD0 Power 9000 btu Dimensions WxDxH mm 805x205x285 mm 2) Model Product code MA2-12NXD0 Power 12000 btu Dimensions WxDxH mm 805x205x285 mm OUTDOOR UNIT: Catalog number: M3O-27FN8-Q Gases: R-32 Max indoor units that can be combined: 3 Power (V/Hz/Φ) : 220~240/50/1 Capacity: Cooling down Nominal Capacity kW: 7.91 Absorbed power (Max): W 2460 SEER Seasonal Energy Efficiency: 6.6 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 425 Heating Nominal Capacity kW: 8.21 Absorbed power (Max): W 2250 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1960 Performance: Outdoor Unit Air Flow: m3/h 2700 External Unit Sound Pressure Max (dB(A)): 59 Sound power (Max) dB(A): 65 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxDxH) (mm): 845x363x702 ; 53 kgs Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit Relevant Features: - "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability - High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. - Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. - Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP Index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA Prime The geometries used for the splits of the PRIME range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Internal fan rotation speed linear regulation The rotation speed of the internal fan, beyond the usual predefined activity levels, can be adjusted within the values ​​1-100%: Follow me function Prime series remote controls are equipped with a temperature sensor which the unit considers as "ambient" temperature. In fact, by setting the Follow me function, the appliance is able to "follow the real temperature perceived by the user, guaranteeing maximum comfort. Condensation control The units can work in cooling mode even with a low external temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Refrigerant leak alarm If the temperatures in the refrigerant circuit are irregular due to leaks, a specific fault code (EC) allows you to identify this condition. emergency function In the event of failure of one of the product's sensors, operation can continue in Emergency mode until the faulty part is replaced. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. Super cool function The Super Cool function is a real hallmark of PRIME air conditioners: activated by simply pressing a button, this particular mode maximizes the rotation speed of the internal fan, thus increasing the flow of cold air and allowing the appliance to reduce the temperature to 17°C as quickly as possible Gear function The Prime units are equipped with the GEAR function which offers the user the possibility of independently managing the power supplied by the unit, choosing one of the 3 different levels: 50%, 75% and 100%. In this way you can disregard the classic settings by concentrating solely on the "gear" in which you want the unit to operate: first, second or third. ECO function The Midea Prime series units are equipped with a special iECO mode which allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners "Do Not Disturb" mode By pressing a button on the remote control, Prime can enter DO NOT DISTURB mode, thus silencing all acoustic warnings, turning off the indoor unit display and optimizing the silence of the indoor fan. "Diamond" Outdoor Unit The external units feature a unique diamond cut shape with no visible screws on the face of the unit Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Midea Trial Split Inverter Air Conditioner PRIME 9+9+12 series with M3OF-21HFN8-Q R-32 9000+9000+12000 btu 1) Model Product code 2x MA2-09NXD0 Power 9000 btu Dimensions WxDxH mm 805x205x285 mm 2) Model Product code MA2-12NXD0 Power 12000 btu Dimensions WxDxH mm 805x205x285 mm OUTDOOR UNIT: Catalog number: M3OF-21HFN8-Q Gases : R-32 Minimum-max number of connectable indoor units: 3 Energy efficiency - Cooling down Nominal Capacity kW: 7.91 Absorbed power (Max): W 2460 SEER Seasonal Energy Efficiency: 6.6 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 425 - Heating Nominal Capacity kW: 8.21 Absorbed power (Max): W 2250 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1960 Performance Outdoor Unit Air Flow: m3/h 2700 External Unit Sound Pressure Max (dB(A)): 59 Sound power (Max) dB(A): 65 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Characteristics Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 Dimensions Indoor Unit WxDxH (mm): 730×198×293 ; 7.4kg Outdoor Unit (LxDxH) (mm): 845x363x702 ; 53 kgs MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit Relevant Features: - "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability - High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. - Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. - Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA Prime The geometries used for the splits of the PRIME range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Internal fan rotation speed linear regulation The rotation speed of the internal fan, beyond the usual predefined activity levels, can be adjusted within the values ​​1-100%: Follow me function Prime series remote controls are equipped with a temperature sensor which the unit considers as "ambient" temperature. In fact, by setting the Follow me function, the appliance is able to "follow the real temperature perceived by the user, guaranteeing maximum comfort. Condensation control The units can work in cooling mode even with a low external temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Refrigerant leak alarm If the temperatures in the refrigerant circuit are irregular due to leaks, a specific fault code (EC) allows you to identify this condition. emergency function In the event of failure of one of the product's sensors, operation can continue in Emergency mode until the faulty part is replaced. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. Super cool function The Super Cool function is a real hallmark of PRIME air conditioners: activated by simply pressing a button, this particular mode maximizes the rotation speed of the internal fan, thus increasing the flow of cold air and allowing the appliance to reduce the temperature to 17°C as quickly as possible Gear function The Prime units are equipped with the GEAR function which offers the user the possibility of independently managing the power supplied by the unit, choosing one of the 3 different levels: 50%, 75% and 100%. In this way you can disregard the classic settings by concentrating solely on the "gear" in which you want the unit to operate: first, second or third. ECO function The Midea Prime series units are equipped with a special iECO mode which allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners "Do Not Disturb" mode By pressing a button on the remote control, Prime can enter DO NOT DISTURB mode, thus silencing all acoustic warnings, turning off the indoor unit display and optimizing the silence of the indoor fan. "Diamond" Outdoor Unit The external units feature a unique diamond cut shape with no visible screws on the face of the unit Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less