Technical features Model Dab Submersible Electric Pump Model Verty Nova 400 M For Clear Water Drainage Energy efficiency Operating range: from 1 to 10m3 /h with heads up to 9 metres. Liquid temperature range: from 0°C to +35°C for domestic use. Pumped liquid: cloudy water without fibers. Pump priming limit: 10-15mm in manual operation. Maximum immersion : 7 metres. APPLICATIONS The submersible drainage pump with vertical delivery is suitable for domestic use of fixed applications with automatic operation, for draining basements and garages subject to flooding. Thanks to its compact and handy shape, and to the integrated float, it is particularly suitable for small drain wells (minimum 20x20cm). It can find application as a portable pump for emergencies such as: drawing water from tanks or rivers, emptying pools and fountains or excavations and underpasses. Also suitable for gardening and hobby work in general. This pump can be used with liquids containing solid size bodies up to 5mm. The integrated float level switch allows a fixed installation ensuring its automatic operation. Equipped with easy access to the float for maintenance and automatic or manual mode selector. Minimum suction level up to 2/3mm. CONSTRUCTION FEATURES OF THE PUMP Pump body, impeller, cover and suction grille in water-resistant technopolymer. Motor, rotor shaft and screws in stainless steel. Triple seal with interposed rings with pre-oil chamber CONSTRUCTION CHARACTERISTICS OF THE MOTOR Asynchronous submersible type for continuous service. Stator inserted in a stainless steel hermetic casing and covered by a cap that encloses wiring, microswitch and capacitor. Rotor mounted on greased-for-life and oversized ball bearings to guarantee silence and durability. Built-in thermo-amperometric protection and permanently inserted capacitor. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: FEKA VS 1000 MA single-phase Power supply: 1 x 230V~50Hz Power: 1kW (1.36HP) Capacitor capacity: 25mF Operating range: flow rate up to 400 l/min (24 m3/h) with heads up to 11.8 metres. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics FEKA VS Submersible pumps WASTEWATER LIFTING Submersible pump in stainless steel with vortex impeller in precision cast steel. Suitable for wastewater and residential sewage containing solids up to 50mm in size. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Seal holder cover, motor case, cap with handle in stainless steel. Construction features of the pump Pump body, seal holder cover, motor casing, cap with handle in AISI 304 stainless steel. Impeller in precision cast steel. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Engine construction features Dry motor, asynchronous type, watertight, cooled by the pumped liquid. Rotor mounted on greased-for-life ball bearings, oversized and selected to ensure low noise and durability. Standard thermo-amperometric protection for the single-phase version, provided by the user for the three-phase version. Capacitor permanently inserted in the single-phase version. Continuous service with liquid at 35 °C and totally immersed pump. The single-phase version can be supplied with a float for automatic operation. Power cable: 10 meters H07RN-F, with plug for the single-phase version. Number of poles: 2 Max starts/hour: 20 Series features: Operating range: from 0 to 32 m3/h with head up to 14 metres. Pumped liquid: sewage and used water in general, however non-aggressive. Free passage: 50 mm Liquid temperature range: - from 0°C to +35°C for domestic use (EN 60335-2-41) - from 0°C to +50°C for other uses Maximum ambient temperature for pump operation with the motor surfaced: +40°C Maximum immersion depth: 7 meters Motor protection degree: IP 68 Insulation class: F Series voltage: 220-240V~ 50Hz Single-phase 380-415V~ 50Hz Three-phase Power cable: 10 meters H07RN-F, with plug for the single-phase version Installation: fixed or portable, vertical Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product Code : FEKA VS 12000 T-NA Power supply : 3 x 400V ~ 50Hz Power : 1.2 kW (1.6 HP) Operating range: from 0 to 32 m3/h with head up to 14 metres Pumped liquid: sewage and used water in general, however non-aggressive Free Passage: 50 mm Liquid Temperature Range : - from 0°C to +35°C for domestic use, - from 0°C to +50°C for other uses Maximum Ambient Temperature for Operation of the Pump with the Motor Surfaced: +40° C Maximum Immersion Depth : 7 meters Motor Protection Degree: IP 68 Insulation class : F Installation : Fixed or Portable, Vertical FEKA VS Submersible Pumps Applications Submersible centrifugal pump in stainless steel with liquid vortex impeller, in precision cast steel, suitable for lifting sewage water and waste water in general, containing solid bodies with maximum dimensions up to 50 mm Construction features of the pump Pump body, seal holder cover, motor casing, cap with handle in AISI 304 stainless steel. Impeller in precision cast steel. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side Construction Characteristics of the Engine Dry motor, asynchronous type, watertight, cooled by the pumped liquid. Rotor mounted on greased-for-life ball bearings, oversized and selected to ensure low noise and durability. Standard thermo-amperometric protection for the single-phase version, provided by the user for the three-phase version. Capacitor permanently inserted in the single-phase version. Continuous service with liquid at 35 °C and totally immersed pump. The single-phase version can be supplied with a float for automatic operation. Power cable: 10 meters H07RN-F, with plug for the single-phase version. Number of poles: 2 , Max starts/hour: 20. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: FEKA VS 750 MA single-phase Power supply: 1 x 230V~50Hz Power: 0.75kW (1HP) Capacitor capacity: 20mF Operating range: flow rate up to 400 l/min (24 m3/h) with heads up to 9.6 metres. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics FEKA VS Submersible pumps WASTEWATER LIFTING Submersible pump in stainless steel with vortex impeller in precision cast steel. Suitable for wastewater and residential sewage containing solids up to 50mm in size. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Seal holder cover, motor case, cap with handle in stainless steel. Construction features of the pump Pump body, seal holder cover, motor casing, cap with handle in AISI 304 stainless steel. Impeller in precision cast steel. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Engine construction features Dry motor, asynchronous type, watertight, cooled by the pumped liquid. Rotor mounted on greased-for-life ball bearings, oversized and selected to ensure low noise and durability. Standard thermo-amperometric protection for the single-phase version, provided by the user for the three-phase version. Capacitor permanently inserted in the single-phase version. Continuous service with liquid at 35 °C and totally immersed pump. The single-phase version can be supplied with a float for automatic operation. Power cable: 10 meters H07RN-F, with plug for the single-phase version. Number of poles: 2 Max starts/hour: 20 Series features: Operating range: from 0 to 32 m3/h with head up to 14 metres. Pumped liquid: sewage and used water in general, however non-aggressive. Free passage: 50 mm Liquid temperature range: - from 0°C to +35°C for domestic use (EN 60335-2-41) - from 0°C to +50°C for other uses Maximum ambient temperature for pump operation with the motor surfaced: +40°C Maximum immersion depth: 7 meters Motor protection degree: IP 68 Insulation class: F Series voltage: 220-240V~ 50Hz Single-phase 380-415V~ 50Hz Three-phase Power cable: 10 meters H07RN-F, with plug for the single-phase version Installation: fixed or portable, vertical Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model Dab Submersible Electric Pump Model Nova Up 600 M-NA For Draining Clear Water For Domestic Use Energy efficiency Operating range: from 1 to 15 m3 /h with heads up to 10 metres. Liquid temperature range: from 0°C to +35°C for domestic use. Pumped liquid: cloudy water without fibers Minimum draft depth: NOVA UP 300 MA 120 mm NOVA UP 300 M-NA 60 mm NOVA UP 600 MA 165 mm NOVA UP 600 M-NA 70 mm Maximum immersion: 7 meters. Installation: vertical, fixed or portable. Degree of protection: IP68. Insulation class: F. APPLICATIONS The submersible drainage pump with vertical delivery is suitable for domestic use of stationary applications with automatic operation, for draining basements and garages subject to flooding. Thanks to its compact and handy shape, it also finds particular application as a portable pump for emergencies such as: drawing water from tanks or rivers, emptying pools and fountains or excavations and underpasses. Also suitable for gardening and hobby work in general. This pump can be used with liquids containing sized bodies solid up to 10mm. The level switch allows a fixed installation guaranteeing its automatic operation. Equipped with a removable filter, it sucks down to a minimum of 2/3mm (with filter removed). CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump body, impeller, cap and suction grille in water-resistant technopolymer. Motor, rotor shaft and screws in stainless steel. Triple seal with interposed rings with pre-oil chamber. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Continuous service asynchronous submersible type. Stator inserted in a stainless steel hermetic casing and covered by a cap that encloses wiring, microswitch and capacitor. Rotor mounted on greased-for-life and oversized ball bearings to guarantee silence and durability. Thermo-amperometric protection built-in and permanently inserted capacitor. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: FEKA VS 550 MA single-phase Power supply: 1 x 230V~50Hz Power: 0.55kW (0.75HP) Capacitor capacity: 20mF Operating range: flow rate up to 300 l/min (18 m3/h) with heads up to 7.4 metres. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics FEKA VS Submersible pumps WASTEWATER LIFTING Submersible pump in stainless steel with vortex impeller in precision cast steel. Suitable for wastewater and residential sewage containing solids up to 50mm in size. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Seal holder cover, motor case, cap with handle in stainless steel. Construction features of the pump Pump body, seal holder cover, motor casing, cap with handle in AISI 304 stainless steel. Impeller in precision cast steel. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Engine construction features Dry motor, asynchronous type, watertight, cooled by the pumped liquid. Rotor mounted on greased-for-life ball bearings, oversized and selected to ensure low noise and durability. Standard thermo-amperometric protection for the single-phase version, provided by the user for the three-phase version. Capacitor permanently inserted in the single-phase version. Continuous service with liquid at 35 °C and totally immersed pump. The single-phase version can be supplied with a float for automatic operation. Power cable: 10 meters H07RN-F, with plug for the single-phase version. Number of poles: 2 Max starts/hour: 20 Series features: Operating range: from 0 to 32 m3/h with head up to 14 metres. Pumped liquid: sewage and used water in general, however non-aggressive. Free passage: 50 mm Liquid temperature range: - from 0°C to +35°C for domestic use (EN 60335-2-41) - from 0°C to +50°C for other uses Maximum ambient temperature for pump operation with the motor surfaced: +40°C Maximum immersion depth: 7 meters Motor protection degree: IP 68 Insulation class: F Series voltage: 220-240V~ 50Hz Single-phase 380-415V~ 50Hz Three-phase Power cable: 10 meters H07RN-F, with plug for the single-phase version Installation: fixed or portable, vertical Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: FEKA VS 1200 MA single-phase Power supply: 1 x 230V~50Hz Power: 1.2kW (1.6HP) Capacitor capacity: 30mF Operating range: flow rate up to 400 l/min (24 m3/h) with heads up to 14 metres. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics FEKA VS Submersible pumps WASTEWATER LIFTING Submersible pump in stainless steel with vortex impeller in precision cast steel. Suitable for wastewater and residential sewage containing solids up to 50mm in size. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Seal holder cover, motor case, cap with handle in stainless steel. Construction features of the pump Pump body, seal holder cover, motor casing, cap with handle in AISI 304 stainless steel. Impeller in precision cast steel. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Engine construction features Dry motor, asynchronous type, watertight, cooled by the pumped liquid. Rotor mounted on greased-for-life ball bearings, oversized and selected to ensure low noise and durability. Standard thermo-amperometric protection for the single-phase version, provided by the user for the three-phase version. Capacitor permanently inserted in the single-phase version. Continuous service with liquid at 35 °C and totally immersed pump. The single-phase version can be supplied with a float for automatic operation. Power cable: 10 meters H07RN-F, with plug for the single-phase version. Number of poles: 2 Max starts/hour: 20 Series features: Operating range: from 0 to 32 m3/h with head up to 14 metres. Pumped liquid: sewage and used water in general, however non-aggressive. Free passage: 50 mm Liquid temperature range: - from 0°C to +35°C for domestic use (EN 60335-2-41) - from 0°C to +50°C for other uses Maximum ambient temperature for pump operation with the motor surfaced: +40°C Maximum immersion depth: 7 meters Motor protection degree: IP 68 Insulation class: F Series voltage: 220-240V~ 50Hz Single-phase 380-415V~ 50Hz Three-phase Power cable: 10 meters H07RN-F, with plug for the single-phase version Installation: fixed or portable, vertical Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product Code : Feka 300 MA 40th Power supply : 1x230V~ 50Hz Power : 0.22 (0.30HP) Minimum and maximum flow rate: from 1 m3 /h to 16 m3 /h Maximum head: 7.5 m Maximum Immersion Depth : 7 meters with cable of adequate length Type of Pumped Liquid : wastewater, wastewater and rainwater Free Passage: 25 mm Minimum suction level: 38 mm Minimum and maximum supported liquid temperature: from +0°C to +35°C for domestic use, from +0°C to +50°C for other uses Motor Protection Degree: IP 68 Motor Insulation Class : F Impeller Construction Material: Technopolymer Type of Possible Installation: Fixed or portable in vertical position FEKA Submersible Pumps for Clear Water Feka 300 is a submersible pump suitable for draining and lifting clear, gray waste water or rainwater in domestic and residential areas. The pumps have been redesigned on the occasion of the forty years of marketing, making them even more reliable, resistant and ergonomic to use. The back impeller in technopolymer allows the passage of solid bodies up to 25 mm. They are also suitable for draining flooded basements, cellars and garages or to prevent flooding when installed in rainwater collection wells, they can also be used as portable pumps in emergency situations to drain water from flooded rooms in the presence of mud, leaves or debris. The pumps are designed for fixed or mobile installations and are available in automatic versions with integrated float switch or manual versions without float switch. The pump body and the suction grille are in technopolymer, the motor shaft in AISI 431 stainless steel. Sturdy and reliable, they have a triple ring seal in oil bath and the continuous service asynchronous submersible motor Stator inserted in an hermetic stainless steel casing and rotor mounted on oversized ball bearings. Thermal protection incorporated in all single-phase versions. Possibility of dry running up to 1 minute. In compliance with European standard EN 60335-2-41, a 10-metre power cable is mandatory for the pump for outdoor use Construction features of the pump Pump body and suction grille in technopolymer. Triple ring seal in oil bath Construction Characteristics of the Engine Continuous service asynchronous type submersible motor. Stator inserted in an hermetic stainless steel casing and rotor mounted on oversized ball bearings. Thermal protection incorporated in all single-phase versions. Motor in AISI 304 stainless steel and shaft in AISI 431 steel for greater resistance to corrosive attacks Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less