Shredders
Grundfos Grundfos Shredder Lifting Station Model: Sololift2 Wc-3 97775315
GRUNDFOS SHREDDER LIFTING STATION model: SOLOLIFT2 WC-3 Model: SOLOLIFT2 WC-3 Possible connections 1 toilet and up to three other connections, such as: washbasin, shower, urinal, bidet Power Consumption Max. 620W Power supply 1 x 220-240V - 10%/+6%, 50Hz Net weight 7.3kg Liquid temperature Max. 50°C Rated current 3.0A Flow rate Max. 149 l/min. Pump head Max. 8.5 m Power cable 1.2 m, 0.75 mm2 Start/stop levels - Boot: 72 mm above the bottom - Stop: 52 mm above the bottom S3 operation - 50% - 1 min. (30 sec on; 30 sec off) Inlet pipes Diameter of 32/36/40/50 mm Exhaust pipe Diameter of 22/25/28/32/36/40 mm SOLOLIFT 2 SOLOLIFT2 is an exclusive range of compact lifting stations which allows the drainage of any domestic sanitary device where required, independent of the gravity drainage system system. The units collect and pump the waste water via a thin pipe (> 23mm) to the next downpipe - height up to 6m or 100m away. With SOLOLIFT2 an extra toilet or full bathroom in the attic or basement will no longer be just a wish. The range includes 5 variants of compact lifting stations for the disposal of domestic wastewater. 3 units called WC-1, WC-3 and CWC-3 have been designed to take waste water from a toilet and other sanitary fixtures. Two units called C-2 and D-2 were designed to remove (hot) waste water from a toilet, shower, washbasin, sink, washing machine and dishwasher. SOLOFIT2 has been designed according to the needs of professionals according to characteristics of high reliability and easy and clean maintenance. The units are plugged in, ready for use and their operation is fully automatic from the moment water enters the tank . The Grundfos SOLOLIFT2 range of lifting stations offer the most reliable wastewater management for any combination of toilet, bidet, sink, shower and washing machine regardless of the placement of the sanitary fixture within a building. Get flexibility, adaptability and improved performance with SOLOLIFT2. Due to its independence from the main sewer, SOLOLIFT2 only needs a simple 20mm delivery pipe, making it ideal for modern life. With its unique features, such as the integrated float switch unit with two start level options*, it is possible to control the volume adjustment according to the connected sanitary device, without the need for additional accessories. Simply choose a low start level for slimline contemporary shower trays, or increase pump volume for scrubbing or tub draining applications. The WC-3 model has 3 additional delivery connections, suitable for pumping domestic wastewater from a shower, bidet, washbasin and toilet with horizontal outlet. Powerful professional shredder Simple installation and replacement of the product Clean and trouble-free maintenance Reliability 1 - Pressure tight, welded tank design. 2 - Robust grinder, able to handle even the occasional discharge of hygiene products.* 3 - Powerful motor with special winding. Easy maintenance 4 - Dry engine design for easy and clean maintenance. Motor, pump and control unit are integrated in one body for easier maintenance and replacement. SOLOLIFT2 will remain in place for the entire service. 5 - The self-adjusting automatic joint simplifies assembly in case of maintenance. 6 - All screws are captive type. 7 - Manual anti-clogging function. 8 - Drainage function separated by drainage socket and hose. 9 - The pressure switch control is external to the tank, therefore there are no moving parts inside the waste water. Substitutability 10 - More compact design. It can easily replace any macerator product on the market. Selectable outlet direction for easy replacement. 11 - Connectors adjustable in height, adaptable. Low maintenance 12 - Innovative bottom design with strong bevel and self-cleaning function to prevent sedimentation. Easy installation 13 - The lifting fastening with clips makes the SOLOLIFT2 easy to install. 14 - Alarm device easily retrofitted - just insert a small alarm with buzzer. 15 - One engine for all models. * Disposal of sanitary products is NOT recommended Product Warranty All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
€655,00
Grundfos Grundfos Grinder Lifting Station Grundfos Sololift2 D-2 97775318
Technical features Very compact variant for pumping waste water from 2 different sanitary devices: 1x washbasin, 1x shower cubicle or bidet Drain connection: ∅ 22/32 Filling connection: 2x ∅ 36/40/50 on the left and right sides of the tank Data sheet Hot water resistant up to 90°C for 30 minutes (C-3) Pressure proof tanks capable of withstanding up to 2.5m of water column 360° rotating discharge connection, for vertical and horizontal assembly Flexible drain connection with 6 different pipe diameters to connect Flexible loading attachment with 4 different connection diameters Start level adjustable according to application (C-3) Including non-return valve ready to install Compact detachable and dry pump-motor unit Dry and clean access to the level switch Tank drainage function Manual release system with screwdriver, without having to open the unit In case of maintenance, the unit does not need to be removed Optional alarm device Product Warranty All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
€495,00
Grundfos Grinder Lifting Station Grundfos Sololift2 C-3 (3 outlets) for gray water 97775317
GRUNDFOS LIFTING STATION SHREDDER SOLOLIFT2 C-3 (3 discharges) for gray water Model: SOLOLIFT2 C-3 Possible connections washing machine, dishwasher, shower, bathtub, kitchen sink, bidet, washbasin Power Consumption Max. 640W Power supply 1 x 220-240V - 10%/+6%, 50Hz Net weight 6.6kg Liquid temperature 75°C constantly (90°C for 30 min.) Rated current 3.1A Flow rate Max. Max. 204 l/min. Pump head Max. 8.5 m Power cable 1.2 m, 0.75 mm2 Start/stop levels - Start: 65 mm above the bottom - Stop: 35 mm above the bottom S3 operation - 50% - 1 min. (30 sec on; 30 sec off) Inlet pipes Diameter of 32/36/40/50 mm Exhaust pipe Diameter of 22/25/28/32/36/40 mm SOLOLIFT 2 SOLOLIFT2 is an exclusive range of compact lifting stations which allows the drainage of any domestic sanitary device where required, independent of the gravity drainage system system. The units collect and pump the waste water via a thin pipe (> 23mm) to the next downpipe - height up to 6m or 100m away. With SOLOLIFT2 an extra toilet or full bathroom in the attic or basement will no longer be just a wish. The range includes 5 variants of compact lifting stations for the disposal of domestic wastewater. 3 units called WC-1, WC-3 and CWC-3 have been designed to take waste water from a toilet and other sanitary fixtures. Two units called C-2 and D-2 were designed to remove (hot) waste water from a toilet, shower, washbasin, sink, washing machine and dishwasher. SOLOFIT2 has been designed according to the needs of professionals according to characteristics of high reliability and easy and clean maintenance. The units are plugged in, ready for use and their operation is fully automatic from the moment water enters the tank . The Grundfos SOLOLIFT2 range of lifting stations offer the most reliable wastewater management for any combination of toilet, bidet, sink, shower and washing machine regardless of the placement of the sanitary fixture within a building. Get flexibility, adaptability and improved performance with SOLOLIFT2. Due to its independence from the main sewer, SOLOLIFT2 only needs a simple 20mm delivery pipe, making it ideal for modern life. With its unique features, such as the integrated float switch unit with two start level options*, it is possible to control the volume adjustment according to the connected sanitary device, without the need for additional accessories. Simply choose a low start level for slimline contemporary shower trays, or increase pump volume for scrubbing or tub draining applications. Reliability 1- Welded, pressure-tight tank design, essential for washing machine and dishwasher connections. 2 - Vortex impeller with 20mm free passage to increase reliability. It manages a water temperature up to 90°C without limitations. Easy maintenance 3 - Dry engine design for easy and clean maintenance. Motor, pump and controller unit are integrated in one body for easier maintenance & replacement. SOLOLIFT2 will remain in place for the entire service. 4 - The self-adjusting automatic joint simplifies assembly in case of maintenance. 5 - The important screws are of the captive type. 6 - Manual anti-clogging function. 7 - Drainage function separated by drainage socket and hose. 8 - Contains a float switch solution with two start levels as well as a protective tube and bayonet lock for single maintenance without the need to disassemble the entire pump unit. Substitutability 9 - More compact design. It can easily replace other lifting stations on the market. It has adjustable connectors. 10 - Selectable outlet direction for easy replacement. Low maintenance 11 - Innovative bottom design with strong bevel and self-cleaning function to prevent sedimentation. Easy installation 12 - The lifting fastening with clips makes the SOLOLIFT2 easy to install. 13 - Possibility of self-supporting or wall installation. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
€610,00
Grundfos Grundfos Sololift2 Wc-1 Shredder Lifting Station (Wc + 1flush)
Grundfos SOLOLIFT2 WC-1 Shredder Lifting Station (WC + 1DRAIN) GUF97775314 Model: SOLOLIFT2 WC-1 Possible attacks 1 WC, plus one more attack, e.g. sink or urinal Power Consumption Max. 620W Power supply 1 x 220-240V - 10%/+6%, 50Hz Net weight 7.3kg Liquid temperature Max. 50°C Rated current 3.0A Flow rate Max. 149 l/min. Pump head Max. 8.5 m Power cable 1.2 m, 0.75 mm2 Operation S 3 - 50 % - 1 min. (30 sec on; 30 sec off) Inlet pipe Diameter 32/36/40 mm Delivery pipe Diameter 22/25/28/32/36/40 mm SOLOLIFT 2 SOLOLIFT2 is an exclusive range of compact lifting stations which allows the drainage of any domestic sanitary device where required, independent of the gravity drainage system system. The units collect and pump the waste water via a thin pipe (> 23mm) to the next downpipe - height up to 6m or 100m away. With SOLOLIFT2 an extra toilet or full bathroom in the attic or basement will no longer be just a wish. The range includes 5 variants of compact lifting stations for the disposal of domestic wastewater. 3 units called WC-1, WC-3 and CWC-3 have been designed to take waste water from a toilet and other sanitary fixtures. Two units called C-2 and D-2 were designed to remove (hot) waste water from a toilet, shower, washbasin, sink, washing machine and dishwasher. SOLOFIT2 has been designed according to the needs of professionals according to characteristics of high reliability and easy and clean maintenance. The units are plugged in, ready for use and their operation is fully automatic from the moment water enters the tank . The Grundfos SOLOLIFT2 range of lifting stations offer the most reliable wastewater management for any combination of toilet, bidet, sink, shower and washing machine regardless of the placement of the sanitary fixture within a building. Get flexibility, adaptability and improved performance with SOLOLIFT2. Due to its independence from the main sewer, SOLOLIFT2 only needs a simple 20mm delivery pipe, making it ideal for modern life. With its unique features, such as the integrated float switch unit with two start level options*, it is possible to control the volume adjustment according to the connected sanitary device, without the need for additional accessories. Simply choose a low start level for slimline contemporary shower trays, or increase pump volume for scrubbing or tub draining applications. toilet 1 WC-1 is a compact automatic lifting station, with an additional pressure connection, suitable for pumping waste water from a wash basin and waste water from a toilet with a horizontal outlet. Powerful professional shredder Easy and clean maintenance Compactness Reliability 1 - Pressure tight, welded tank design. 2 - Robust grinder, able to handle even the occasional discharge of hygiene products.* 3 - Powerful motor with special winding. Easy maintenance 4 - Dry engine design for easy and clean maintenance. Motor, pump and control unit are integrated in one body for easier maintenance and replacement. SOLOLIFT2 will remain in place for the entire service. 5 - The self-adjusting automatic joint simplifies assembly in case of maintenance. 6 - All screws are captive type. 7 - Manual anti-clogging function. 8 - Drainage function separated by drainage socket and hose. 9 - The pressure switch control is external to the tank, therefore there are no moving parts inside the waste water. Substitutability 10 - More compact design. It can easily replace any macerator product on the market. Selectable outlet direction for easy replacement. 11 - Connectors adjustable in height, adaptable. Low maintenance 12 - Innovative bottom design with strong bevel and self-cleaning function to prevent sedimentation. Easy installation 13 - The lifting fastening with clips makes the SOLOLIFT2 easy to install. 14 - Alarm device easily retrofitted - just insert a small alarm with buzzer. 15 - One engine for all models. * Disposal of sanitary products is NOT recommended Product Warranty All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
€542,00
Grundfos Grundfos Shredder Lifting Station Model: Sololift2 Cwc-3 For Waste Water Cod. 97775316
GRUNDFOS GRINDER LIFTING STATION model: SOLOLIFT2 CWC-3 for waste water Suitable for pumping waste water from: 1 x toilet, wall mounted Optional health devices, e.g.: -1 x washbasin -1 x shower cubicle -1 x bidet or urinal Drain connection: -∅22/25/28/32/36/40 Load Fitting: -1 x ∅32/36/40 on the upper side -2 x ∅36/40/50 on the left and right sides of the tank SOLOLIFT 2 THE NEW GENERATION OF SHREDDERS AND HOME LIFTING STATIONS SOLOLIFT2 is an exclusive range of compact lifting stations which allows the drainage of any domestic sanitary device where required, independent of the gravity drainage system system. The units collect and pump the waste water via a thin pipe (> 23mm) to the next downpipe - height up to 6m or 100m away. With SOLOLIFT2 an extra toilet or full bathroom in the attic or basement will no longer be just a wish. The range includes 5 variants of compact lifting stations for the disposal of domestic wastewater. 3 units called WC-1, WC-3 and CWC-3 have been designed to take waste water from a toilet and other sanitary fixtures. Two units called C-2 and D-2 were designed to remove (hot) waste water from a toilet, shower, washbasin, sink, washing machine and dishwasher. SOLOFIT2 has been designed according to the needs of professionals according to characteristics of high reliability and easy and clean maintenance. The units are plugged in, ready for use and their operation is fully automatic from the moment water enters the tank . The Grundfos SOLOLIFT2 range of lifting stations offer the most reliable wastewater management for any combination of toilet, bidet, sink, shower and washing machine regardless of the placement of the sanitary fixture within a building. Get flexibility, adaptability and improved performance with SOLOLIFT2. Due to its independence from the main sewer, SOLOLIFT2 only needs a simple 20mm delivery pipe, making it ideal for modern life. With its unique features, such as the integrated float switch unit with two start level options*, it is possible to control the volume adjustment according to the connected sanitary device, without the need for additional accessories. Simply choose a low start level for slimline contemporary shower trays, or increase pump volume for scrubbing or tub draining applications. SOLOLIFT2 CWC-3 The CWC-3 is a small and compact automatic lifting station, suitable for pumping domestic wastewater from residential areas, where evacuation by gravity is not possible. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
€475,00