Gas water heater Beretta Idrabagno LX 13 l LPG Complete with Low NOx Fume Kit - New ErP LPG code: 20143036 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: L Sanitary energy efficiency (ηwh) % 80.2 Daily gas consumption (Qfuel) kW/h 15.175 Annual gas consumption (AFC) GJ 11 Daily electricity consumption (Qelec) kWh 0.069 Annual electricity consumption (AEC) kWh 15 Sound power level indoors (LWA) dB(A) 51 Emissions of nitrogen oxides (Nox) mg/kWh 33 Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 10.7 Nominal heat input (G20-G30-G31) kW 25.00 Nominal thermal power (G20-G30-G31) kW 22.45 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar 28-30 Gas connection Ø 3/4" 3/4" 3/4” Smoke temperature (max-min) G20 / G30 / G31 °C 128-71 / 123-63 / 129-69 1 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX4D Dimensions and weight Dimensions (H×W×D) mm 642×340×237 Net weight kg 19 IDRABAGNO LX: INNOVATION IS AT HOME The new line of LOW NOx indoor water heaters From Beretta's technological research comes IDRABAGNO Lx, the new line of instantaneous water heaters with very low emissions , completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with the recent European regulations on NOx. The wide range of IDRABAGNO Lx, made up of 3 sealed chamber models of 11, 13 and 17 l, with both methane and LPG codes, thanks to the new, elegant and linear aesthetics and compact dimensions, integrates perfectly into every living environment, representing the ideal solution to meet every domestic hot water production need. Ideal for installation inside the home, the new water heaters, in the 11 and 13 L versions, can also be installed outside , in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10°C for the 11 and 13 liter models, and -7°C for the 17 liter model. The new IDRABAGNO Lx line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/ kWh. Thanks to the innovative Idrabagno Lx burner, of the hyperstoichiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. Lots of new features Simple and intuitive interface with icon language Large backlit display and 4 command keys Special functions and self-diagnostics on display Latest generation burner Water-cooled hyperstoichiometric burner Wide flame modulation High heat output, maximum sanitary comfort Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Gas water heater Beretta Idrabagno LX 11 l LPG Complete with Low NOx Fume Kit - New ErP CNG code: 20143031 LPG code: 20143032 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: M Sanitary energy efficiency (ηwh) % 75.4 Daily gas consumption (Qfuel) kW/h 8.109 Annual gas consumption (AFC) GJ 6 Daily electricity consumption (Qelec) kWh 0.065 Annual electricity consumption (AEC) kWh 14 Sound power level indoors (LWA) dB(A) 51 Emissions of nitrogen oxides (Nox) mg/kWh 33 Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 9.5 Nominal heat input (G20-G30-G31) kW 22.20 Nominal thermal power (G20-G30-G31) kW 19.89 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar 28-30 Gas connection Ø 3/4" 3/4" 3/4” Smoke temperature (max-min) G20 / G30 / G31 °C 120-71 / 121-64 / 124-60 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX4D Dimensions and weight Dimensions (H×W×D) mm 642×340×237 Net weight kg 19 IDRABAGNO LX: INNOVATION IS AT HOME The new line of LOW NOx indoor water heaters From Beretta's technological research comes IDRABAGNO Lx, the new line of instantaneous water heaters with very low emissions , completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with the recent European regulations on NOx. The wide range of IDRABAGNO Lx, made up of 3 sealed chamber models of 11, 13 and 17 l, with both methane and LPG codes, thanks to the new, elegant and linear aesthetics and compact dimensions, integrates perfectly into every living environment, representing the ideal solution to meet every domestic hot water production need. Ideal for installation inside the home, the new water heaters, in the 11 and 13 L versions, can also be installed outside , in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10°C for the 11 and 13 liter models, and -7°C for the 17 liter model. The new IDRABAGNO Lx line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/ kWh. Thanks to the innovative Idrabagno Lx burner, of the hyperstoichiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. Lots of new features Simple and intuitive interface with icon language Large backlit display and 4 command keys Special functions and self-diagnostics on display Latest generation burner Water-cooled hyperstoichiometric burner Wide flame modulation High heat output, maximum sanitary comfort Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Gas water heater Beretta Idrabagno LX 11 l Methane Complete with Low NOx Fume Kit - New ErP CNG code: 20143031 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: M Sanitary energy efficiency (ηwh) % 75.4 Daily gas consumption (Qfuel) kW/h 8.109 Annual gas consumption (AFC) GJ 6 Daily electricity consumption (Qelec) kWh 0.065 Annual electricity consumption (AEC) kWh 14 Sound power level indoors (LWA) dB(A) 51 Emissions of nitrogen oxides (Nox) mg/kWh 33 Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 9.5 Nominal heat input (G20-G30-G31) kW 22.20 Nominal thermal power (G20-G30-G31) kW 19.89 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar 28-30 Gas connection Ø 3/4" 3/4" 3/4” Smoke temperature (max-min) G20 / G30 / G31 °C 120-71 / 121-64 / 124-60 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX4D Dimensions and weight Dimensions (H×W×D) mm 642×340×237 Net weight kg 19 Gas versions available - Methane IDRABAGNO LX: INNOVATION IS AT HOME The new line of LOW NOx indoor water heaters From Beretta's technological research comes IDRABAGNO Lx, the new line of instantaneous water heaters with very low emissions , completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with the recent European regulations on NOx. The wide range of IDRABAGNO Lx, made up of 3 sealed chamber models of 11, 13 and 17 l, with both methane and LPG codes, thanks to the new, elegant and linear aesthetics and compact dimensions, integrates perfectly into every living environment, representing the ideal solution to meet every domestic hot water production need. Ideal for installation inside the home, the new water heaters, in the 11 and 13 liter versions , can also be installed outside , in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10°C for the 11 and 13 liter models, and -7°C for the 17 liter model. The new IDRABAGNO Lx line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/ kWh. Thanks to the innovative Idrabagno Lx burner , of the hyperstochiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit , results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. Lots of new features Simple and intuitive interface with icon language Large backlit display and 4 command keys Special functions and self-diagnostics on display Latest generation burner Water-cooled hyperstoichiometric burner Wide flame modulation High heat output, maximum sanitary comfort Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Mini 17 LN Low NOx sealed chamber water heater complete with LPG fume exhaust kit Typology: Forced Draft Sealed Chamber; Model: Mini 17 LN; Sanitary energy efficiency class: A; Sanitary load profile: L; Power supply: LPG Daily gas consumption: 15,175 kW/h; Sanitary Energy Efficiency: 80.2%; Annual gas consumption: 11 GJ; Emissions of nitrogen oxides (Nox): 33 mg/kWh; Hot water production Δt=30°: 13.3 litres/min; Nominal heat input: 30.0 kW; Nominal thermal power: 27.90 kW; Min/max withdrawal range: 2.5/13 litres/min; Min/max pressure: 0.2/10.0 bar; DHW temperature selection range: 36-65°C ; Supply voltage: 230/50V/Hz; Electrical protection degree: IPX4D; Dimensions: (H×W×D) 640×400×240 mm;Weight: 21 kg; Water/gas connections: 1/2” – 3/4″ Ø; RIELLO MINI From RIELLO technological research comes MINI LN, the new line of low-emission instantaneous water heaters with sealed chamber, completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with recent European regulations to reduce NOx emissions. The new aesthetic, elegant and linear, and the compact dimensions, allow the integration of this product in any living environment. This feature represents the ideal solution for responding to any domestic hot water production need. Prepared for installation inside the home, the new water heaters can also be installed outside, in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10° c. Latest generation burner with reduced NOx emissions The new RIELLO MINI LN line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or less than 56 mg /kWh. The innovative hyperstoichiometric type burner allows the flame to be fed by a greater air-gas mixture than that required for combustion, resulting in a very low flame temperature. This characteristic, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors international. The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The technology and the advantages of the range Innovative hyperstoichiometric and cooled burner with low emissions Wide flame modulation which allows excellent stability of the domestic hot water delivery temperature, even with minimum withdrawals Electronic ignition and ionization flame control Wide flame modulation (1 : 3) which allows perfect stability of the domestic hot water delivery temperature, even with minimum withdrawals Brand new user interface with backlit display with icons and 4 keys, to easily navigate the menu and make adjustments Abundant domestic hot water production: 11, 13 or 17 litres/min Even more compact dimensions and simple installation Mounting template and power cable supplied. Instantaneous sealed chamber water heater with methane and LPG versions Many new functions in a linear and modern design new RIELLO Mini LN are characterized by the new electronics which, combined with the modern and linear design, results in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40x60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Power kW 11 Gas category II2H3B/P Type C13-C33 NOx emissions 45 mg/kWh Nominal thermal power 22 kW Minimum thermal power 7 kW Modulation range 1:3 Nominal heat input 19.5 kW Minimum heat input 6.3 kW Maximum nominal pressure 10 bar Minimum operating pressure 0.1 bar Minimum operating flow 3.2 l/min Flow rate with temperature difference (Δt) 25 °C 11 l/min Supply voltage (Freq. 50 HZ) 230 V Maximum absorbed power 33 W Sound power 58 dB(A) Protection type IPX4 Weight 13kg Energy class A M pick profile NEXT EVO X It is the new instantaneous Low NOx sealed chamber gas water heater, characterized by an exclusive design, small dimensions and a new intuitive LCD display which makes it easier to adjust the water temperature. Low NOx: ErP compliant 09/26/2018 Ultra compact: only 16.5 cm deep Temperature control via NTC probes at the inlet and outlet of the exchanger Flame ionization electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.2 bar Operation even with minimum water flow rates up to 2.5 l/min Can be integrated with solar thermal systems IPX4D electrical protection Internal installation * 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. * 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. * 100% BUILT TO LAST Strong and super resistant materials, components and products developed to work in extreme conditions to deliver high-level results with maximum durability High efficiency Product characterized by high energy performance, reduction of consumption and polluting emissions. Solar integration Prepared for integration with a solar thermal system. Electronic temperature control Electronic control panel for easier and more immediate use. Led Display Multi-function LCD display, simple and intuitive. Ultra-thin Extremely small footprint that allows for concealed installation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Gas water heater Beretta Idrabagno LX 17 l LPG Complete with Low NOx Fume Kit - New ErP LPG code: 20143038 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: XL Sanitary energy efficiency (ηwh) % 82 Daily gas consumption (Qfuel) kW/h 24,225 Annual gas consumption (AFC) GJ 18 Daily electricity consumption (Qelec) kWh 0.082 Annual electricity consumption (AEC) kWh 18 Sound power level indoors (LWA) dB(A) 51 Emissions of nitrogen oxides (Nox) mg/kWh 40 Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 13.2 Nominal heat input (G20-G30-G31) kW 30.00 Nominal thermal power (G20-G30-G31) kW 27.60 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar - / 37 Gas connection Ø 3/4" 3/4" 3/4” Smoke temperature (max-min) G20 / G30 / G31 °C 135-72 / - / 137-71 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX4D Dimensions and weight Dimensions (H×W×D) mm 640×400×246 Net weight kg 21 IDRABAGNO LX: INNOVATION IS AT HOME The new line of LOW NOx indoor water heaters From Beretta's technological research comes IDRABAGNO Lx, the new line of instantaneous water heaters with very low emissions , completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with the recent European regulations on NOx. The wide range of IDRABAGNO Lx, made up of 3 sealed chamber models of 11, 13 and 17 l, with both methane and LPG codes, thanks to the new, elegant and linear aesthetics and compact dimensions, integrates perfectly into every living environment, representing the ideal solution to meet every domestic hot water production need. Ideal for installation inside the home, the new water heaters, in the 11 and 13 L versions, can also be installed outside , in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10°C for the 11 and 13 liter models, and -7°C for the 17 liter model. The new IDRABAGNO Lx line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/ kWh. Thanks to the innovative Idrabagno Lx burner, of the hyperstoichiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. Lots of new features Simple and intuitive interface with icon language Large backlit display and 4 command keys Special functions and self-diagnostics on display Latest generation burner Water-cooled hyperstoichiometric burner Wide flame modulation High heat output, maximum sanitary comfort Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Gas water heater Beretta Idrabagno LX 17 l Methane Complete with Low NOx Fume Kit - New ErP CNG code: 20143037 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: XL Sanitary energy efficiency (ηwh) % 82 Daily gas consumption (Qfuel) kW/h 24,225 Annual gas consumption (AFC) GJ 18 Daily electricity consumption (Qelec) kWh 0.082 Annual electricity consumption (AEC) kWh 18 Sound power level indoors (LWA) dB(A) 51 Emissions of nitrogen oxides (Nox) mg/kWh 40 Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 13.2 Nominal heat input (G20-G30-G31) kW 30.00 Nominal thermal power (G20-G30-G31) kW 27.60 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar - / 37 Gas connection Ø 3/4" 3/4" 3/4” Smoke temperature (max-min) G20 / G30 / G31 °C 135-72 / - / 137-71 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX4D Dimensions and weight Dimensions (H×W×D) mm 640×400×246 Net weight kg 21 IDRABAGNO LX: INNOVATION IS AT HOME The new line of LOW NOx indoor water heaters From Beretta's technological research comes IDRABAGNO Lx, the new line of instantaneous water heaters with very low emissions , completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with the recent European regulations on NOx. The wide range of IDRABAGNO Lx, made up of 3 sealed chamber models of 11, 13 and 17 l, with both methane and LPG codes, thanks to the new, elegant and linear aesthetics and compact dimensions, integrates perfectly into every living environment, representing the ideal solution to meet every domestic hot water production need. Ideal for installation inside the home, the new water heaters, in the 11 and 13 L versions, can also be installed outside , in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10°C for the 11 and 13 liter models, and -7°C for the 17 liter model. The new IDRABAGNO Lx line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/ kWh. Thanks to the innovative Idrabagno Lx burner, of the hyperstoichiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. Lots of new features Simple and intuitive interface with icon language Large backlit display and 4 command keys Special functions and self-diagnostics on display Latest generation burner Water-cooled hyperstoichiometric burner Wide flame modulation High heat output, maximum sanitary comfort Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION the product is available on order! Rinnai Infinity Sensei N32I indoor condensing water heater Complete with smoke outlet kit REU-N3237FFC-E-LPG LPG - NEW Internal installation Dimensions (H x W x D) (mm) 670x470x276 Energy Class A XXL profile Max hydraulic flow rate Δt 25°C (l/min) 32 l/min Frontal Display Thermoregulation Can be cascaded Yes Internal installation / Villa - Apartment with multifunctional shower, hydromassage / Professional installation sensei Rinnai presents Infinity Sensei, the masters of condensation, the brand new range of instant gas condensing water heaters of 26 and 32 litres/minute, for indoors or outdoors. Ultra performing on their own, perfect in cascade installations, where they express all their potential by satisfying even the most important hot water production needs in commercial premises, accommodation facilities, production plants and much more. Condensation is ECO-SUSTAINABLE TECHNOLOGY In condensing technology, the water vapor contained in the combustion products is also used to generate heat. For this reason, the Infinity Sensei series condensing water heaters reduce consumption by up to 30% and polluting emissions (NOx and CO₂) by up to 70%. DID YOU KNOW THAT? In professional applications, only the condensing sanitary production is compliant with the law. The Ministerial Decree "Minimum requirements" of 6/26/2015 regulates both heating and the production of domestic hot water, also called, like heating, to respect a minimum efficiency on the PCI equal to 90 + 2 log Pn . This value can only be reached with condensation . From the entry into force of the decree, in order to have parameters of polluting emissions and energy efficiency compliant with the legislation, all economic entities that use hot water professionally must use gas-fired producers only of the condensing type in all cases ( replacement, renovation and new construction). The Infinity Sensei condensing water heaters they are perfectly compatible with renewable sources they can manage up to 4 additional remote commands for temperature control from different points of use have an increasingly user-friendly electronic board, which allows you to set and monitor the operating parameters directly from the standard remote control. The Technician can activate the Service Soon parameter, a warning signal for scheduled maintenance, functional to guarantee the periodicity of the assistance interventions, which preserve the longevity of the systems. Optimal combustion, even in the mountains The Infinity SENSEI condensing appliances, like all the new Rinnai water heaters, are equipped with the high altitude function that the technician can set in addition to the 900m altitude where the air is rarefied. Installation in cascade and in Modus Infinity Sensei for indoor or outdoor use can be connected to each other in certified turnkey systems that allow all the security of perfect sizing with respect to system requirements. Several devices can be managed in an optimal way, as if they were a single fully modulating machine. The Modus can connect up to 10 producers in series and can be further combined with each other. Sensei: even better. Cascade management becomes smarter, with a single connector that connects up to 24 luminaires and a new IP addressing system for Master-Slave management, functional for a uniform distribution of the workload among all the luminaires that make up the module . Internal Sensei Infinity Sensei series 26 litres/min condensing is an instantaneous domestic hot water producer for indoor installation. Rinnai patented R-Evolution heat exchanger, new metal fiber burner, zero governor valve, full condensation. Anti-corrosion and anti-freeze enamelled galvanized steel casing included as standard up to -20°C. Like all condensing models, N26i is compatible with Rinnai Modus systems for easy installation of multiple appliances in medium and large professional systems. For domestic use, with the first ignition free of charge by an authorized technician, Rinnai offers a free 4-year warranty extension. Energy efficiency class A. Unlimited hot water without sudden changes in temperature Flow regulator: constant temperature as the flow varies Temperature control to degree For domestic use, free initial test with free warranty extension, by an authorized Rinnai Technician Electronic ignition without pilot flame Control panel on the bridge for managing the water temperature. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Vaillant gas water heater turboMAG Plus Low NOx 12 lt MAG 125/1- 5 RT LPG complete with smoke exhaust kit - NEW Technical features Article number 0010022443 Gas categories II2HM3P Class A for hot water Hot water flow rate (ΔT= 25 K) l/min 12.0 water temperature max. 60 °C Electric power absorbed W 45 Absorbed electric power (in standby) W 5 Electrical connection V/Hz 230 / 50 Protection class IPX5D NOx class 6 Dimensions HxWxD mm 580x350x193 turboMAG Low NOx Forced draught instantaneous low NOx gas water heater, with electronic ignition and compact dimensions turboMAG plus are forced draft water heaters with low NOx emissions (class 6) for the production of domestic hot water. The turboMAG plus offer is very flexible and covers the following DHW production flow rates: 12, 15 and 17 litres/minute with Natural Gas and Commercial Propane models. The new turboMAG plus gas water heater is equipped with a combustion system that expands the modulation field and probes to control cold inlet water and hot outlet water, guaranteeing perfect temperature stability . The exchanger and the burner increase the performance of the water heater by reducing the width to 35cm and maintaining the height and depth of the previous range. The Vaillant research and development team, focused on guaranteeing leadership in the sector for over 140 years, has developed turboMAG plus with the target of safety: there are 26 control devices to ensure maximum reliability for the user. The turboMAG plus indoor water heaters have the hydraulic connections supplied. turboMAG plus allows 360° installation flexibility: inside apartments and also outside, resisting temperatures down to -25°C (thanks to the antifreeze accessory) and rain (IPX5D approval). A solar kit as an accessory also allows you to pre-heat the incoming water and further reduce gas consumption. Low NOx emissions (class 6) Compact size (35cm wide) Modulation range 1:5 of the power Flexible connections supplied Design and intuitive touch screen Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS WATER HEATER JUNKERS BOSCH MODEL THERM 5600 S T5600 S 12 LITERS METHANE Low NOx - NEW Technical features: ACS energy class: A Declared load profile: M Model: Therm 5600 S T5600 S 12 Installation Type: Indoor Power supply: METHANE (G30/31) Technical data: Thermal power: 20.7 kW Minimum thermal power: 4.3 kW Thermal input: 23.0 kW Minimum heat input: 4.5 kW Yields: At 100% of nominal flow: 90% At 30% of nominal flow: 95% Maximum Pressure: 12 bar Minimum operating pressure: 0.1 bar Modulation range: 4.3 - 20.7 kW Maximum water flow corresponding to a ∆t of 25°: 12.0 l/min Sound power level indoors: 58 db(A) Annual electricity consumption: 34 kWh Electrical Protection Degree: IPX4D Dimensions: (PxLxH): 180x335x575 mm; Weight: 13 Kg General characteristics: Junkers Bosch water heater model Therm 5600 S , gives a touch of innovation to your home, with extremely small dimensions becoming part of the furniture, guaranteeing very high performance, it has a modern and refined design, with display with touch regulation and, through a special accessory, possibility of remote control via the Bosch Water App. It has never been so easy to manage your water heater, now also comfortably seated through your electronic devices (Smartphone or Tablet), via Bluetooth, in fact Therm 5600 s by downloading the Bosch Water App, available for iOS and Android, allows you to regulate the temperature, manages consumption and if there is any malfunction, from precise diagnostics. Having the possibility of regulating the degree of temperature, it allows you to save between 20 and 100% of the maximum power, according to your needs, guaranteeing maximum efficiency in any circumstance, significantly reducing energy consumption. Advantages: It offers maximum comfort by producing hot water constantly, without sudden changes or interruptions, thanks to the probe for monitoring the real and desired temperature Extremely Efficient with constant electronic control of the temperature of the water supplied Easy to install, perfect even in case of replacement Sustainable: low NOx emissions Intuitive display with touch adjustment and, using a special accessory, the possibility of remote control via the Bosch Water App (Optional) Installation flexibility also combining with solar thermal systems for DHW production (Optional) and fumes discharge up to 12 meters Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features: ACS energy class: A Declared load profile: M Model: Therm 5600 S T5600 S 12 Installation Type: Indoor Power supply: LPG Technical data: Thermal power: 20.7 kW Minimum thermal power: 4.3 kW Thermal input: 23.0 kW Minimum heat input: 4.5 kW Yields: At 100% of nominal flow: 90% At 30% of nominal flow: 95% Maximum Pressure: 12 bar Minimum operating pressure: 0.1 bar Modulation range: 4.3 - 20.7 kW Maximum water flow corresponding to a ∆t of 25°: 12.0 l/min Sound power level indoors: 58 db(A) Annual electricity consumption: 34 kWh Electrical Protection Degree: IPX4D Dimensions: (PxLxH): 180x335x575 mm; Weight: 13 Kg General characteristics: Junkers Bosch water heater model Therm 5600 S , gives a touch of innovation to your home, with extremely small dimensions becoming part of the furniture, guaranteeing very high performance, it has a modern and refined design, with display with touch regulation and, through a special accessory, possibility of remote control via the Bosch Water App. It has never been so easy to manage your water heater, now also comfortably seated through your electronic devices (Smartphone or Tablet), via Bluetooth, in fact Therm 5600 s by downloading the Bosch Water App, available for iOS and Android, allows you to regulate the temperature, manages consumption and if there is any malfunction, from precise diagnostics. Having the possibility of regulating the degree of temperature, it allows you to save between 20 and 100% of the maximum power, according to your needs, guaranteeing maximum efficiency in any circumstance, significantly reducing energy consumption. Advantages: It offers maximum comfort by producing hot water constantly, without sudden changes or interruptions, thanks to the probe for monitoring the real and desired temperature Extremely Efficient with constant electronic control of the temperature of the water supplied Easy to install, perfect even in case of replacement Sustainable: low NOx emissions Intuitive display with touch adjustment and, using a special accessory, the possibility of remote control via the Bosch Water App (Optional) Installation flexibility also combining with solar thermal systems for DHW production (Optional) and fumes discharge up to 12 meters Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Gas water heater Therm 5700 S 15 liters t5700s 15 low NOx complete with smoke exhaust kit 7736504992 Product data Symbol Unit 7736504992 Declared load profile XL Water heating energy efficiency class A Water heating energy efficiency ηwh % 83 Annual electricity consumption AEC kWh 26 Annual fuel consumption AFC GJ 18 Thermostat setting (factory setting) Tset °C 60 Sound power level within LWA dB 61 Information on operating capacity outside peak hours no Specific precautions to be taken at the time of assembly, installation or maintenance (if applicable) see technical documentation Smart Control No Daily electricity consumption (average climatic conditions) Qelec kWh 0.120 Daily fuel consumption Qfuel kWh 23,923 Nitrous oxide emissions (for gas and fuel oil only) NOx mg/kWh 17 Dimensions 575 x 365 x 170 mm Therm 5700 S Instantaneous gas water heater with touch display and electronic temperature control Intuitive setting thanks to the touch display Constant temperature hot water for maximum comfort Reduced gas consumption, thanks to the electronic control of the temperature of the water supplied Management with dedicated App, via accessory module Maximum comfort The Therm 5700 S water heater allows you to enjoy maximum comfort thanks to the constant supply of hot water: the temperature monitoring probe guarantees constant water production and without sudden changes in temperature Temperature control To be as efficient as possible, this water heater constantly monitors the temperature and flow rate of the water that is supplied by it, ensuring maximum comfort Intuitive setup Bosch products are designed to be intuitive and easy to use. The settings of the Therm 5700 S water heater are also very simple thanks to the touch display. Furthermore, using a special accessory, it can be controlled remotely via the Bosch Water App Low NOx emissions The water heater is designed to minimize polluting emissions Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less