Explore our collection of Riello products: burners, boilers and heating systems. Choose reliability and energy efficiency with Riello. Achieve maximum comfort and energy savings with our high-quality products. Find out more and find the ideal solution for your heating needs. Buy online today and trust the Riello brand.
Technical features Model: AcquaFun2 LN 11 Product code : 20149831 Gas : LPG Energy efficiency Sanitary energy efficiency class: A Sanitary load profile : M Sanitary energy efficiency (ηwh) : 77.2% Daily gas consumption : 8.084 kW/h Annual gas consumption : 6 GJ Emissions of nitrogen oxides: 46 mg/kWh Characteristics Typology : Open chamber Draft Natural draft Ignition : 2 x 1.5V batteries Flame control : By ionization Flame modulation : Continue Hot water production Δt=30° : 9.3 litres/min Nominal heat input : 21.0 ~ 22.0 kW Rated heat output: 18.33~19.43kW Performance Water Withdrawal range with selector at minimum : from 2.5 to 5.5 litres/min Withdrawal range with selector at maximum : from 2.5 to 11 litres/min Water temperature rise with selector at minimum : 50°C Water temperature rise with selector at maximum : 25°C Minimum ~ normal ~ maximum pressure : 0.2 ~ 2.0 ~ 10.0 bar Water connections: 12.70 mm 1/2” Ø DHW temperature selection range: 35° ~ 60° C Performance Gases Nominal supply pressure G20,G30,G31 : 20/28 ~ 30/37 mbar Gas connections: 12.70 mm 1/2” Ø Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Electrical protection degree : IPX4D Dimensions and weight Dimensions (HxWxD): 675x350x230 mm Net weight : 12.0 Kg Riello ACQUAFUN 2 LN water heater The new Low NOx open chamber water heater Riello presents Acquafun 2 LN, the new instantaneous open chamber water heater, fully signed by Riello both in terms of design and manufacturing. Product that is part of the new offer of low NOx emission products able to offer maximum sanitary comfort in compliance with the recent European regulations for the reduction of NOx emissions. The new range is available in two sizes, 11 and 14 litres, available in both CNG and LPG versions, with dedicated codes. Acquafun 2 LN, completely renewed in the aesthetic and planning design, is ideal for installation in any living context, characteristics which, together with the simplicity of maintenance and performance for the end user, distinguish Acquafun 2 as an ideal solution for the production of domestic hot water for residential use. Latest generation burner with reduced Nox emissions The innovative water-cooled hyperstoichiometric type burner allows a significant reduction in the polluting values of carbon monoxide and nitrogen produced by combustion, in compliance with the demanding requirements of EU Regulation 814/2013 which requires emissions equal to or lower than 56 mg/kWh The high heat output , together with the wide flame modulation, up to 45% of the nominal output, complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort . Simple and intuitive command interface Simple and intuitive backlit display with visualization of water temperature in °C, flame presence and battery charge level Three command buttons allow you to manage all the water heater functions Ease of use for the user due to the keys with symbols dedicated to the single user functions Immediate availability of hot water The innovative electronic gas valve combined with the pressure regulator allows the immediate delivery of the power in delivery, thanks to a controlled management of the flowmeter and the NTC temperature probe. The new electronics allow simplified maintenance and high-level performance. 1. NTC temperature probe 2. Limit thermostat with reset from display 3. Exchanger 4. Cooled burner 5. Electronic gas valve with pressure regulator 6. Flow restrictor 7. Flowmeter 8. Temperature regulator EAF Cold water inlet UAC Hot water outlet The new Acquafun2 LN range is characterized by the rapid achievement of the desired hot water temperature, offering optimal comfort. Product guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€200,00
Technical features Model: AcquaFun2 LN 11 Product code : 20149827 Methane gas Energy efficiency Sanitary energy efficiency class: A Sanitary load profile : M Sanitary energy efficiency (ηwh) : 77.2% Daily gas consumption : 8.084 kW/h Annual gas consumption : 6 GJ Emissions of nitrogen oxides: 46 mg/kWh Characteristics Typology : Open chamber Draft Natural draft Ignition : 2 x 1.5V batteries Flame control : By ionization Flame modulation : Continue Hot water production Δt=30° : 9.3 litres/min Nominal heat input : 21.0 ~ 22.0 kW Rated heat output: 18.33~19.43kW Performance Water Withdrawal range with selector at minimum : from 2.5 to 5.5 litres/min Withdrawal range with selector at maximum : from 2.5 to 11 litres/min Water temperature rise with selector at minimum : 50°C Water temperature rise with selector at maximum : 25°C Minimum ~ normal ~ maximum pressure : 0.2 ~ 2.0 ~ 10.0 bar Water connections: 12.70 mm 1/2” Ø DHW temperature selection range: 35° ~ 60° C Performance Gases Nominal supply pressure G20,G30,G31 : 20/28 ~ 30/37 mbar Gas connections: 12.70 mm 1/2” Ø Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Electrical protection degree : IPX4D Dimensions and weight Dimensions (HxWxD): 675x350x230 mm Net weight : 12.0 Kg Riello ACQUAFUN 2 LN water heater The new Low NOx open chamber water heater Riello presents Acquafun 2 LN, the new instantaneous open chamber water heater, fully signed by Riello both in terms of design and manufacturing. Product that is part of the new offer of low NOx emission products able to offer maximum sanitary comfort in compliance with the recent European regulations for the reduction of NOx emissions. The new range is available in two sizes, 11 and 14 litres, available in both CNG and LPG versions, with dedicated codes. Acquafun 2 LN, completely renewed in the aesthetic and planning design, is ideal for installation in any living context, characteristics which, together with the simplicity of maintenance and performance for the end user, distinguish Acquafun 2 as an ideal solution for the production of domestic hot water for residential use. Latest generation burner with reduced Nox emissions The innovative water-cooled hyperstoichiometric type burner allows a significant reduction in the polluting values of carbon monoxide and nitrogen produced by combustion, in compliance with the demanding requirements of EU Regulation 814/2013 which requires emissions equal to or lower than 56 mg/kWh The high heat output , together with the wide flame modulation, up to 45% of the nominal output, complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort . Simple and intuitive command interface Simple and intuitive backlit display with visualization of water temperature in °C, flame presence and battery charge level Three command buttons allow you to manage all the water heater functions Ease of use for the user due to the keys with symbols dedicated to the single user functions Immediate availability of hot water The innovative electronic gas valve combined with the pressure regulator allows the immediate delivery of the power in delivery, thanks to a controlled management of the flowmeter and the NTC temperature probe. The new electronics allow simplified maintenance and high-level performance. 1. NTC temperature probe 2. Limit thermostat with reset from display 3. Exchanger 4. Cooled burner 5. Electronic gas valve with pressure regulator 6. Flow restrictor 7. Flowmeter 8. Temperature regulator EAF Cold water inlet UAC Hot water outlet The new Acquafun2 LN range is characterized by the rapid achievement of the desired hot water temperature, offering optimal comfort. Product guarantee: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.
€200,00
RIELLO MINI 11 METHANE GAS WATER HEATER COMPLETE WITH FUME EXHAUST KIT product code: 20108606 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: L profile Characteristics of heating/DHW operation: Useful power - firebox: 17.6 - 20.5 kW Useful efficiency at max-min power: 91.8-84.0% Forced draft sealed chamber Min/normal/max pressure bar 0.15/2/10 Domestic hot water production: 11 l/min Min. withdrawal: 2.5 l/min Power supply V/Hz 230/50 Electrical protection degree IP X4D Dimensions (hxlxp) mm 640 x 400 x 246 ; 18.5 kgs Power supply: methane RIELLO MINI Easy-to-use controls, fault signaling via LED Gas consumption is automatically adjusted to the amount of hot water required, allowing for significant energy savings Upper cover to be fixed to the casing to protect the appliance from the entry of liquids (version for outdoor use) The antifreeze heaters of the outdoor version guarantee operation with outdoor temperatures down to -15°C Mounting template and power cable supplied Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€404,00
RIELLO MINI 11 LPG GAS WATER HEATER COMPLETE WITH FUME EXHAUST KIT product code: 20108606 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: L profile Characteristics of heating/DHW operation: Useful power - firebox: 17.6 - 20.5 kW Useful efficiency at max-min power: 91.8-84.0% Forced draft sealed chamber Min/normal/max pressure bar 0.15/2/10 Domestic hot water production: 11 l/min Min. withdrawal: 2.5 l/min Power supply V/Hz 230/50 Electrical protection degree IP X4D Dimensions (hxlxp) mm 640 x 400 x 246 ; 18.5 kgs Power supply: LPG RIELLO MINI Easy-to-use controls, fault signaling via LED Gas consumption is automatically adjusted to the amount of hot water required, allowing for significant energy savings Upper cover to be fixed to the casing to protect the appliance from the entry of liquids (version for outdoor use) The antifreeze heaters of the outdoor version guarantee operation with outdoor temperatures down to -15°C Mounting template and power cable supplied Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€404,00
ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA UN'AMMACCATURA INTERNA, FISSAGGIO CON VITI NON DI SERIE, BOZZATURA LATERALE DX, AMMACCATURA LATERALE SX, VITI NON DI SERIE SULLA CANNA FUMARIA E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI VISUALIZZA LE FOTO ACCANTO L'IMMAGINE PRINCIPALE) Caratteristiche tecniche Modello: AcquaFun2 LN 11 Codice prodotto : 20149827 Gas : Metano Efficienza energetica Classe di efficienza energetica in sanitario : A Profilo di carico sanitario : M Efficienza energetica sanitario (ηwh) : 77,2 % Consumo giornaliero di gas : 8,084 kW/h Consumo annuo di gas : 6 GJ Emissioni di ossidi di Azoto : 46 mg/kWh Caratteristiche Tipologia : Camera aperta Tiraggio Tiraggio naturale Accensione : 2 batterie da 1,5 V Controllo di fiamma : A ionizzazione Modulazione di fiamma : Continua Produzione acqua calda Δt=30° : 9,3 litri/min Portata termica nominale : 21,0 ~ 22,0 kW Potenza termica nominale : 18,33 ~ 19,43 kW Performance Acqua Campo di prelievo con selettore al minimo : da 2,5 a 5,5 litri/min Campo di prelievo con selettore al massimo : da 2,5 a 11 litri/min Elevazione di temperatura dell’acqua con selettore al minimo : 50°C Elevazione di temperatura dell’acqua con selettore al massimo : 25°C Pressione minima ~ normale ~ massima : 0,2 ~ 2,0 ~ 10,0 bar Attacchi acqua : 12,70 mm 1/2” Ø Campo di selezione temperatura acqua sanitario : 35° ~ 60° C Performance Gas Pressione nominale di alimentazione G20,G30,G31 : 20/28 ~ 30/37 mbar Attacchi gas : 12,70 mm 1/2” Ø Dati elettrici Alimentazione (V,Hz, Ø) : 220~240/50/1 Grado di protezione elettrica : IPX4D Dimensioni e peso Dimensioni (HxLxP) : 675x350x230 mm Peso netto : 12,0 Kg Scaldacqua Riello ACQUAFUN 2 LN Il nuovo scaldacqua Low NOx a camera aperta Riello presenta Acquafun2 LN, il nuovo scaldaacqua istantaneo a camera aperta , integralmente a firma Riello sia come progettazione che come fabbricazione. Prodotto che si inserisce nella nuova offerta di prodotti a basse emissioni NOx in grado di offrire il massimo comfort sanitario nel rispetto delle recenti normative Europee per la riduzione di emissioni NOx. La nuova gamma è disponibile in due taglie , 11 e 14 litri, disponibili in versione Metano che Gpl , con codici dedicati. Acquafun2 LN, completamente rinnovato nel design estetico e progettuale, è ideale per l'installazione in ogni contesto abitativo, caratteristiche che, unitamente alla semplicità di manutenzione e di prestazione per l'utente finale, contraddistinguono Acquafun2 come una soluzione ideale per la produzione di acqua calda sanitario ad uso residenziale. Bruciatore di ultima generazione con ridotte emissioni di Nox L'innovativo bruciatore di tipo iperstechiometrico e raffreddato ad acqua, permette un abbassamento sensibile dei valori inquinanti di ossido di carbonio e di azoto prodotti dalla combustione, in ottemperanza con gli esigenti requisiti previsti dal Regolamento UE 814/2013 che richiede emissioni uguali o inferioria 56 mg/kwh L'elevata portata termica , unitamente all'ampia modulazione di fiamma , fino al 45% della portata nominale , completano il profilo del nuovo bruciatore in termini di performance, offrendo all'utente il massimo comfort sanitario. Interfaccia comandi semplice ed intuitiva Display retroilluminato semplice ed intuitivo con visualizzazione di temperatura dell'acqua in °C,presenza fiamma e livello di carica batteria Tre tasti comando permettono di gestire tutte le funzioni dello scalda acqua Semplicità di utilizzo per l'utente dovuta ai tasti con simboli dedicati alle singole funzioni utente Disponibilità immediata di acqua calda L'innovativa valvola gas elettronica abbinata al regolatore di pressione consente l'immediata erogazione della potenza in mandata, grazie ad una gestione controllata del flussimetro e della sonda di temperatura NTC. La nuova elettronica permette una manutenzione semplificata e prestazioni di alto livello. 1. Sonda NTC di temperatura 2. Termostato limite con riarmo da display 3. Scambiatore 4. Bruciatore raffreddato 5. Valvola gas elettronica con regolatore di pressione 6. Limitatore di flusso 7. Flussimetro 8. Regolatore di temperatura EAF Entrata acqua fredda UAC Uscita acqua calda La nuova gamma Acquafun2 LN si caratterizza per il raggiungimento in tempi brevi della temperatura dell’acqua calda desiderata, offrendo un comfort ottimale. Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€165,00
