Technical features Model Self-priming centrifugal electric pump Dab Model DP 102M Energy efficiency Operating range: up to 4.3 m3/h. Pumped liquid: clean, free from solid or abrasive substances, not viscous, non-aggressive, non-crystallised and chemically neutral, close to the water features. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Maximum ambient temperature: +40°C Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Installation: fixed in horizontal position. Special executions on request: other voltages and/or frequencies. Motor protection degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220-240V / 50Hz three-phase 230-400V / 50Hz APPLICATIONS Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector (optional) to be introduced in wells of 4" or diameter greater. Used for the water supply of farmhouses and small agriculture. CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump: Body and motor support in cast iron. Technopolymer impeller and diffuser. Stainless steel shim ring. Mechanical seal in carbon/ceramic. Ejector: Cast iron body. Venturi tube in technopolymer A and brass nozzle. The ejector is available in three models (E 20 - E 25 - E 30) depending on the performance required. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Rotor mounted on greased-for-life and oversized ball bearings. Built-in thermo-amperometric protection and capacitor permanently inserted in single-phase motors. For the protection of the three-phase motor it is recommended to use a motor protection switch in compliance with the norms. Construction according to CEI 61-69 (EN 60335-2-41) standards. Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector to be introduced in wells of 4” or greater diameter. Used for the water supply of farmhouses and small agriculture. Operating range: up to 4.3 m3/h. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Self-priming: up to 27 metres. Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: EUROINOX 50/50 M single-phase with pump body in stainless steel N° impellers: 5 Power supply: 1 x 230V~50Hz Power: 1kW (1.36HP) Capacitor capacity: 25mF Operating range: flow rate up to 80 l/min (4.8 m3/h) with heads up to 72 metres. Maximum working pressure : 8 bar (800 kPa) To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics EUROINOX Multistage centrifugal electric pumps DOMESTIC WATER SUPPLY Horizontal axis multistage centrifugal pump, characterized by extremely silent operation, suitable for domestic use for water supply and pressurization, irrigation of orchards and gardens, movement of water in general. Series features: Operating range: from 10 to 120 litres/min. with head up to 72 m. Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral, close to the characteristics of water. Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41) from 0°C to +40°C for other uses. Maximum ambient temperature: +40°C Maximum working pressure: 8 bar (800 kPa) Installation: fixed or portable in horizontal position. Motor protection degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220/240 V - 50 Hz - 2 poles three-phase 230/400 V - 50 Hz - 2 poles Construction features of the pump: Pump body in stainless steel. Motor support in die-cast aluminium, seal holder cover in AISI 304 steel. Mechanical seal in carbon/ceramic. Rotor shaft in AISI 304 steel. Impellers, diffuser bodies and diffusers in technopolymer. Stainless steel shim rings. Engine construction features: Continuous duty asynchronous motor. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. Protection by the user for the three-phase version. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Grundfos electric pump for clear water drainage completely in stainless steel UNILIFT KP 150 A1 011H1800 General characteristics Brand: Grundfos Supplied model: UNILIFT KP 150 A1 Supplied model number: 011H1800 Data sheet Max flow rate: 2.36 l/s Max head: 5.5 m Max. Particle: 10mm Model: A Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Stainless steel: EN 1.4301, AISI 304 Installation Ambient temperature limit. 0 .. 50 °C Connection type. Rp Size attack. 1 1/4 inch max. depth installation. 7 m Liquid Liquid temperature range. 0 .. 50 °C Density. 998.2 kg/m³ Electrical data Absorbed power - P1. 300W Network frequency. 50Hz Nominal tension. 1 x 220-230V Rated current. 1.3A Capacitor capacity - run. 8 µF/400 V Protection class (IEC 34-5). IP68 Insulation class (IEC 85). f Integrated motor protection. CONTACT Thermal protection. internal Electric cable length. 10m Cable plug type. SCHUKO Checks Level switch. Floating Other Net weight. 6.1kg Gross weight. 6.83kg Packing volume. 0.013 m³ Description Useful to: Wastewater - Commercial buildings Domestic wastewater Industrial waste water Grundfos UNILIFT KP are stainless steel submersible pumps designed for pumping non-aggressive water and gray wastewater such as sewage and domestic sewage with particles up to 10 mm. The pump can be used as a portable unit or fixed installation inside and outside buildings. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Technical features Product Code : Feka 300 MA 40th Power supply : 1x230V~ 50Hz Power : 0.22 (0.30HP) Minimum and maximum flow rate: from 1 m3 /h to 16 m3 /h Maximum head: 7.5 m Maximum Immersion Depth : 7 meters with cable of adequate length Type of Pumped Liquid : wastewater, wastewater and rainwater Free Passage: 25 mm Minimum suction level: 38 mm Minimum and maximum supported liquid temperature: from +0°C to +35°C for domestic use, from +0°C to +50°C for other uses Motor Protection Degree: IP 68 Motor Insulation Class : F Impeller Construction Material: Technopolymer Type of Possible Installation: Fixed or portable in vertical position FEKA Submersible Pumps for Clear Water Feka 300 is a submersible pump suitable for draining and lifting clear, gray waste water or rainwater in domestic and residential areas. The pumps have been redesigned on the occasion of the forty years of marketing, making them even more reliable, resistant and ergonomic to use. The back impeller in technopolymer allows the passage of solid bodies up to 25 mm. They are also suitable for draining flooded basements, cellars and garages or to prevent flooding when installed in rainwater collection wells, they can also be used as portable pumps in emergency situations to drain water from flooded rooms in the presence of mud, leaves or debris. The pumps are designed for fixed or mobile installations and are available in automatic versions with integrated float switch or manual versions without float switch. The pump body and the suction grille are in technopolymer, the motor shaft in AISI 431 stainless steel. Sturdy and reliable, they have a triple ring seal in oil bath and the continuous service asynchronous submersible motor Stator inserted in an hermetic stainless steel casing and rotor mounted on oversized ball bearings. Thermal protection incorporated in all single-phase versions. Possibility of dry running up to 1 minute. In compliance with European standard EN 60335-2-41, a 10-metre power cable is mandatory for the pump for outdoor use Construction features of the pump Pump body and suction grille in technopolymer. Triple ring seal in oil bath Construction Characteristics of the Engine Continuous service asynchronous type submersible motor. Stator inserted in an hermetic stainless steel casing and rotor mounted on oversized ball bearings. Thermal protection incorporated in all single-phase versions. Motor in AISI 304 stainless steel and shaft in AISI 431 steel for greater resistance to corrosive attacks Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less