Grundfos electric pump for clear water drainage completely in stainless steel UNILIFT KP 150 AV1 011H1400 General characteristics Brand: Grundfos Supplied model: UNILIFT KP 150 AV1 Supplied model number: 011H1400 Data sheet Max flow rate: 2.36 l/s Max head: 5.5 m Max. Particle: 10mm Model: A Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Stainless steel: EN 1.4301, AISI 304 Installation Ambient temperature limit. 0 .. 50 °C Connection type. Rp Size attack. 1 1/4 inch max. depth installation. 2 m Liquid Liquid temperature range. 0 .. 50 °C Density. 998.2 kg/m³ Electrical data Absorbed power - P1. 300W Network frequency. 50Hz Nominal tension. 1 x 220-230V Rated current. 1.3A Capacitor capacity - run. 8 µF/400 V Protection class (IEC 34-5). IP68 Insulation class (IEC 85). f Integrated motor protection. CONTACT Thermal protection. internal Electric cable length. 5 m Cable plug type. SCHUKO Checks Level switch: Vertical level switch Other Net weight. 5.84kg Gross weight. 6.55kg Packing volume. 0.013 m³ Description Useful to: Wastewater - Commercial buildings Domestic wastewater Industrial waste water Grundfos UNILIFT KP are stainless steel submersible pumps designed for pumping non-aggressive water and gray wastewater such as sewage and domestic sewage with particles up to 10 mm. The pump can be used as a portable unit or fixed installation inside and outside buildings. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Self-priming grundfos booster set with bluetooth connection SCALA1 3-45 99530405 General characteristics Brand: Grundfos Supplied model: SCALE1 3-45 Supplied model number: 99530405 Data sheet Nominal flow rate: 3.59 m³/h Head: 25 m Max head: 44 m Mechanical seal type: BVBP Approvals: CE, EAC, AAA Potable Water Approvals: WRAS,ACS Curve tolerance: ISO9906:2012 3B Model: A Starting pressure: 2.2 bar Material Pump body: Composite Impeller: Composite Installation Ambient temperature limit: 0 .. 55 °C Max operating pressure: 8 bar Max suction pressure: 3 bar Input connection type: R Send type: R Input connection size: 1 inch Size of the outlet connection: 1 inch Nominal pressure of the connection: PN 8 Liquid Pumped liquid: Water Liquid temperature range: 0 .. 45 °C Liquid temperature during operation: 20°C Density: 998.2 kg/m³ Electrical data Max P1: 910W Rated power - P2: 0.58 kW Network frequency: 50Hz Rated Voltage: 1 x 230V Maximum current consumption: 4.1A Protection class (IEC 34-5): X4D Insulation class (IEC 85): F Cable length: Electric: 1.5m Socket Type E/F (CEE7/7) Power plug: Schuko Other Net weight: 12kg Gross weight: 14kg Packaging volume: 0.046 m³ Storage temperature range: -40 .. 70 °C Description Useful to Pressure Boost - Commercial Buildings Collection of groundwater for domestic use Increased water pressure for domestic use Rainwater harvesting for domestic buildings Grundfos SCALA1 is a compact, self-priming, fully integrated, all-in-one water system designed for pressure boosting in domestic and light commercial applications, such as garden irrigation or pressure boosting for detached and detached houses and flats . Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Self-priming grundfos booster set with bluetooth connection SCALA1 3-35 99530404 General characteristics Brand: Grundfos Supplied model: SCALE1 3-35 Supplied model number: 99530404 Data sheet Nominal flow rate: 3.72 m³/h Head: 20 m Max head: 36 m Mechanical seal type: BVBP Approvals: CE, EAC, AAA Potable Water Approvals: WRAS,ACS Curve tolerance: ISO9906:2012 3B Model: A Starting pressure: 1.5 bar Material Pump body: Composite Impeller: Composite Installation Ambient temperature limit: 0 .. 55 °C Max operating pressure: 8 bar Max suction pressure: 4 bar Input connection type: R Send type: R Input connection size: 1 inch Size of the outlet connection: 1 inch Nominal pressure of the connection: PN 8 Liquid Pumped liquid: Water Liquid temperature range: 0 .. 45 °C Liquid temperature during operation: 20°C Density: 998.2 kg/m³ Electrical data Max P1: 720W Rated power - P2: 0.45 kW Network frequency: 50Hz Rated Voltage: 1 x 230V Maximum current consumption: 3.27A Protection class (IEC 34-5): X4D Insulation class (IEC 85): F Cable length: electric:1.5m Socket Type E/F (CEE7/7) Power plug: Schuko Other Net weight: 11.5kg Gross weight: 13.5kg Packaging volume: 0.046 m³ Storage temperature range: -40 .. 70 °C Description Useful to Pressure Boost - Commercial Buildings Collection of groundwater for domestic use Increased water pressure for domestic use Rainwater harvesting for domestic buildings Grundfos SCALA1 is a compact, self-priming, fully integrated, all-in-one water system designed for pressure boosting in domestic and light commercial applications, such as garden irrigation or pressure boosting for detached and detached houses and flats . Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Grundfos submersible single impeller single phase electric pump for sewage in stainless steel ap 50b.50.11.a1 96004598 General characteristics Brand: Grundfos Model: ap 50b.50.11.a1 Code: 96004598 Data sheet Max flow rate: 7.78 l/s Max head: 14 m Impeller type: VORTEX Max. Particle: 50mm Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Steel: stainless steel EN 1.4301 AISI 304 Installation Ambient temperature limit: 0 .. 40 °C Connection type: Rp Size attack: 2 inch max. depth of installation: 2 m Inst. dry/submerged room: S Auto Pairing: Y Liquid Liquid temperature range: 0 .. 40 °C Density: 998.2 kg/m³ Electrical data P1 power input: 1.75 kW 1-phase motor type: PSC Rated power - P2 : 1.21 kW Network frequency: 50Hz Rated Voltage: 1 x 230V Rated Current: 8A Cos phi - power factor: 0.95 Rated Drive Speed: 2760rpm Capacitance capacity - running: 20 µF/400 V Protection class (IEC 34-5): IP68 Insulation class (IEC 85): F Integrated motor protection: CONTACT Thermal protection: internal Electric cable length: 5 m Cable plug type: SCHUKO Checks Level switch: Float Other Net weight: 11kg Gross weight: 12.5kg Description Useful to: Wastewater - Commercial buildings Domestic wastewater Grundfos UNILIFT AP35B are stainless steel submersible pumps designed for pumping sewage (excluding toilet waste), with particles up to 35 mm. The pump is suitable for self-coupling installation, allowing easy access for maintenance and other purposes. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Grundfos submersible single-impeller three-phase electric pump for sewage in stainless steel ap 50b.50.15.3 96004609 WITHOUT SHUKO PLUG AND WITHOUT FLOAT General characteristics Brand: Grundfos Model: ap 50b.50.15.3 Code: 96004609 Data sheet Max flow rate: 8.61 l/s Max head: 17 m Impeller type: VORTEX Max. Particle: 50mm Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Steel: stainless steel EN 1.4301 AISI 304 Installation Ambient temperature limit: 0 .. 40 °C Connection type: Rp Size attack: 2 inch max. depth of installation: 2 m Inst. dry/submerged room: S Auto Pairing: Y Liquid Liquid temperature range: 0 .. 40 °C Density: 998.2 kg/m³ Electrical data P1 power input: 2.15 kW Rated power - P2 : 1.5 kW Network frequency: 50Hz Rated Voltage: 3 x 400V Rated Current: 3.7A Cos phi - power factor: 0.85 Rated Drive Speed: 2785rpm Protection class (IEC 34-5): IP68 Insulation class (IEC 85): F Integrated motor protection: NONE Thermal protection: external Electric cable length: 5 m Cable plug type: NONE Other Net weight: 11.9kg Gross weight: 13.9kg Description Useful to: Wastewater - Commercial buildings Domestic wastewater Grundfos UNILIFT AP35B are stainless steel submersible pumps designed for pumping sewage (excluding toilet waste), with particles up to 35 mm. The pump is suitable for self-coupling installation, allowing easy access for maintenance and other purposes. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Single-stage self-priming Grundfos electric pump for clear water jp3-42 99458766 General characteristics Brand: Grundfos Supplied model: jp3-42 Supplied model number: 99458766 Data sheet Nominal flow rate: 3 m³/h Max warhead: 42m / 42m Primary mechanical seal: BBVP Approvals on nameplate: CE,EAC Curve tolerance: ISO9906:2012 3B Model: A Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller: Composite Material code: S Installation Ambient temperature limit: 0 .. 40 °C Max operating pressure: 6 bar Max suction pressure: 1 bar Pump suction: G1 Pump delivery : G1 Liquid Pumped liquid Water Liquid temperature range 0 .. 40 °C Liquid temperature during operation 20 °C Density 998.2 kg/m³ Electrical data Absorbed power - P1: 720 W rated power - P2: 0.447 kW Network frequency: 50Hz Rated Voltage: 1 x 230V Rated Current: 3.1A Starting Current: 9.2A Rated Transmission Speed: 2800rpm Capacitor capacity - run: 12 µF/450 V Protection class (IEC 34-5): IP44 Insulation class (IEC 85:) F Cable plug type: SCHUKO Cable: Y Checks Presscontrol: Without presscontrol Switch: On/Off switch not included Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Technical features Model : CM 3-4 Voltage : 1 x 220-240V Flow rate : 4 m3 / h Head : 36 m Power : 0.50kW / 0.7kW Suction : Rp 1" Send : Rp 1" Sound power level : 53 dB(A) Dimensions Height : 20.8cm Length : 30.4cm Width : 14.1cm Weight : 12.00 Kg Grundfos CM-A The two main features of the horizontal multistage CM pump are compactness and modularity, which make different configurations possible. The pump is mainly composed of a series of interchangeable modules, designed to work together for a long time, regardless of the application. CM pumps are equipped with mains powered motors. The CM pump is mainly used as an integrated pump in OEM solutions and in household compressors. It is compact, silent, reliable and flexible and all this makes it an optimal solution for installation and interaction with other components in large systems. It can be installed in systems or used as an independent pump. GRUNDFOS MULTISTAGE SINGLE-PHASE CENTRIFUGAL PUMP CM 3-4 SERIES CM is the Grundfos centrifugal electric pump series. Excellent for a wide range of applications, it stands out for its excellent technical characteristics and ease of use. GREAT INSTALLATION AND USE MODULARITY The peculiar feature of the Grundfos CM electric pump is the quality of the components. The shaft, impellers and chambers are in stainless steel, the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The thread is of the Whitworth RP type. The engine is air cooled. The electric pump is equipped with thermal protection with automatic reset for any faults caused by both slow and rapid increases in temperature (constant overload and stall conditions). It is capable of withstanding dry running for short periods. The compact dimensions and the lowered base allow it to be installed even where space is limited. APPLICATIONS The Grundfos centrifugal CM is an electric pump ideal for pressurizing and moving liquids on the surface. There are many applications: washing systems of all kinds, withdrawal from tanks, domestic supply, pressurisation, irrigation, swimming pools, fountains, etc. GUARANTEED SAVINGS AND HIGH COMFORT Grundfos motors are characterized by their high efficiency in relation to low electrical consumption. The savings also materialize in the duration over time due to the high construction quality and the materials used. The shaft, the impellers and the chambers are in stainless steel, the pump body with the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The engine is air cooled. The remarkable reactivity to the demand for water and the silent operation contribute considerably to the efficiency of the product and to the comfort produced both in domestic and professional uses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase

Read more less

Technical features Model : CM 3-5 Voltage : 1 x 220-240V Flow rate : 4 m3 / h Head : 20.6 m Power : 0.50kW / 0.75kW Suction : Rp 1" Send : Rp 1" Sound power level : 53 dB(A) Grundfos CM-A The two main features of the horizontal multistage CM pump are compactness and modularity, which make different configurations possible. The pump is mainly composed of a series of interchangeable modules, designed to work together for a long time, regardless of the application. CM pumps are equipped with mains powered motors. The CM pump is mainly used as an integrated pump in OEM solutions and in household compressors. It is compact, silent, reliable and flexible and all this makes it an optimal solution for installation and interaction with other components in large systems. It can be installed in systems or used as an independent pump. GRUNDFOS MULTISTAGE SINGLE-PHASE CENTRIFUGAL PUMP SERIES CM3-3 CM is the Grundfos centrifugal electric pump series. Excellent for a wide range of applications, it stands out for its excellent technical characteristics and ease of use. GREAT INSTALLATION AND USE MODULARITY The peculiar feature of the Grundfos CM electric pump is the quality of the components. The shaft, impellers and chambers are in stainless steel, the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The thread is of the Whitworth RP type. The engine is air cooled. The electric pump is equipped with thermal protection with automatic reset for any faults caused by both slow and rapid increases in temperature (constant overload and stall conditions). It is capable of withstanding dry running for short periods. The compact dimensions and the lowered base allow it to be installed even where space is limited. APPLICATIONS The Grundfos centrifugal CM is an electric pump ideal for pressurizing and moving liquids on the surface. There are many applications: washing systems of all kinds, withdrawal from tanks, domestic supply, pressurisation, irrigation, swimming pools, fountains, etc. GUARANTEED SAVINGS AND HIGH COMFORT Grundfos motors are characterized by their high efficiency in relation to low electrical consumption. The savings also materialize in the duration over time due to the high construction quality and the materials used. The shaft, the impellers and the chambers are in stainless steel, the pump body with the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The engine is air cooled. The remarkable reactivity to the demand for water and the silent operation contribute considerably to the efficiency of the product and to the comfort produced both in domestic and professional uses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase

Read more less

Grundfos electric pump for clear water drainage completely in stainless steel UNILIFT KP 150 A1 011H1600 General characteristics Brand: Grundfos Supplied model: UNILIFT KP 150 A1 Supplied model number: 011H1600 Data sheet Max flow rate: 2.36 l/s Max head: 5.5 m Max. Particle: 10mm Model: A Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Stainless steel: EN 1.4301, AISI 304 Installation Ambient temperature limit. 0 .. 50 °C Connection type. Rp Size attack. 1 1/4 inch max. depth installation. 2 m Liquid Liquid temperature range. 0 .. 50 °C Density. 998.2 kg/m³ Electrical data Absorbed power - P1. 300W Network frequency. 50Hz Nominal tension. 1 x 220-230V Rated current. 1.3A Capacitor capacity - run. 8 µF/400 V Protection class (IEC 34-5). IP68 Insulation class (IEC 85). f Integrated motor protection. CONTACT Thermal protection. internal Electric cable length. 5 m Cable plug type. SCHUKO Checks Level switch. Floating Other Net weight. 5.57kg Gross weight. 6.27kg Packing volume. 0.013 m³ Description Useful to: Wastewater - Commercial buildings Domestic wastewater Industrial waste water Grundfos UNILIFT KP are stainless steel submersible pumps designed for pumping non-aggressive water and gray wastewater such as sewage and domestic sewage with particles up to 10 mm. The pump can be used as a portable unit or fixed installation inside and outside buildings. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Grundfos two-pump installation kit SCALA1 TWIN SET 99725165 General characteristics Brand: Grundfos Model: SCALA1 TWIN SET Code: 99725165 Data sheet Potable Water Approvals: WRAS,ACS Material Basis: Composite O-rings: rubber, NBR Composite collector Screw material: stainless steel Isolation valve: brass Installation Max operating pressure: 8 bar Connection type: Rp input Send type: Rp Input connection size: 1 inch Outlet connection size: 5/4 inch No. of screws: 4 number of base plates: 1 number of collectors: 2 number of valves 4 number of O-rings: 2 Electrical data Cable length: 0.8m number of power cords: 1 Other Net weight: 4.6kg Gross weight: 5.3kg Packaging volume: 0.017 m³ Suitable for the following products: SCALA1 Description Useful to: Pressure Boost - Commercial Buildings Collection of groundwater for domestic use Increased water pressure for domestic use Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Self-priming grundfos booster set with bluetooth connection SCALA1 5-55 99530407 General characteristics Brand: Grundfos Supplied model: SCALA1 5-55 Supplied model number: 99530407 Data sheet Nominal flow rate: 5.33 m³/h Head: 25 m Max head: 55 m Mechanical seal type: BVBP Approvals: CE, EAC, AAA Potable Water Approvals: WRAS,ACS Curve tolerance: ISO9906:2012 3B Model: A Starting pressure: 2.8 bar Material Pump body: Composite Impeller: Composite Installation Ambient temperature limit: 0 .. 55 °C Max operating pressure: 8 bar Max suction pressure: 2 bar Input connection type: R Send type: R Input connection size: 1 inch Size of the outlet connection: 1 inch Nominal pressure of the connection: PN 8 Liquid Pumped liquid: Water Liquid temperature range: 0 .. 45 °C Liquid temperature during operation: 20°C Density: 998.2 kg/m³ Electrical data P1 max.: 1200W Rated power - P2: 0.78 kW Network frequency: 50Hz Rated Voltage: 1 x 230V Maximum current consumption: 5.38A Protection class (IEC 34-5): X4D Insulation class (IEC 85): F Cable length: electric:1.5m Socket Type E/F (CEE7/7) Power plug: Schuko Other Net weight: 14kg Gross weight: 16kg Packaging volume: 0.046 m³ Storage temperature range: -40 .. 70 °C Description Useful to Pressure Boost - Commercial Buildings Collection of groundwater for domestic use Increased water pressure for domestic use Rainwater harvesting for domestic buildings Grundfos SCALA1 is a compact, self-priming, fully integrated, all-in-one water system designed for pressure boosting in domestic and light commercial applications, such as garden irrigation or pressure boosting for detached and detached houses and flats . Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Grundfos electric pump for clear water drainage completely in stainless steel UNILIFT KP 150 A1 011H1800 General characteristics Brand: Grundfos Supplied model: UNILIFT KP 150 A1 Supplied model number: 011H1800 Data sheet Max flow rate: 2.36 l/s Max head: 5.5 m Max. Particle: 10mm Model: A Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Stainless steel: EN 1.4301, AISI 304 Installation Ambient temperature limit. 0 .. 50 °C Connection type. Rp Size attack. 1 1/4 inch max. depth installation. 7 m Liquid Liquid temperature range. 0 .. 50 °C Density. 998.2 kg/m³ Electrical data Absorbed power - P1. 300W Network frequency. 50Hz Nominal tension. 1 x 220-230V Rated current. 1.3A Capacitor capacity - run. 8 µF/400 V Protection class (IEC 34-5). IP68 Insulation class (IEC 85). f Integrated motor protection. CONTACT Thermal protection. internal Electric cable length. 10m Cable plug type. SCHUKO Checks Level switch. Floating Other Net weight. 6.1kg Gross weight. 6.83kg Packing volume. 0.013 m³ Description Useful to: Wastewater - Commercial buildings Domestic wastewater Industrial waste water Grundfos UNILIFT KP are stainless steel submersible pumps designed for pumping non-aggressive water and gray wastewater such as sewage and domestic sewage with particles up to 10 mm. The pump can be used as a portable unit or fixed installation inside and outside buildings. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less