ATTENTION THE PRODUCT IS NEW AND WORKING BUT IT HAS A SIDE DENT, A SMALL DAMAGE NEAR THE DISPLAY AND THE PACKAGING IS WORN. (FOR MORE INFORMATION SEE PHOTO NEXT TO THE MAIN IMAGE) Open Chamber Boiler Beretta CIAO LX 24 CAI Low NOx Methane 20151648 - NEW Technical Features Model: CIAO LX 24 CAI Code: 20151648 Nominal heating/sanitary thermal capacity: 26.70 kW Nominal heating/sanitary thermal power: 24.06 kW Efficiency at rated power: 90.1 Efficiency at reduced load (30%): 89.2% NOx class 6 Maximum operating pressure heating bar 3 Maximum absorbed electrical power W 47 Quantity of hot water deltaT 25C° 13.8 l/min Dimensions HxWxD 740x400x340 HELLO LX Beretta has renewed the Ciao open chamber boiler; the previous Ciao S CAI model now becomes Ciao LX CAI and is in NOX Class 6. Aesthetically it looks like the previous one but its technology is now completely different. The Ciao LX CAI is the entry-level model for approaching Beretta boiler technology; the CAI model has an open combustion chamber and natural draft. The adjectives that identify it are: high quality standard, robustness, reliability and economy in purchase and operation. The innovative Double Exchanger is very compact and is of the plate type with the possibility of pre-heating . It also uses a low consumption Synchronous Circulator (EEI = 0.20) with anti-blocking cycle system and 3-way valve; it is equipped with a smoke control thermostat and by-pass on the heating circuit. Beretta Ciao has a simple, modern and elegant line; the front panel, the real brain of the boiler, is equipped with many functions. Ciao LX CAI is designed to be installed outdoors in partially protected places, thanks to the dedicated accessories and the anti-freeze protection on the board up to 0 °C. In colder temperature conditions, it is possible to extend the protection up to -10 °C using the specific anti-freeze resistance kit together with the siphon anti-freeze resistance kit (optional, to be requested separately from the Beretta Technical Assistance Centre). A convenient digital liquid crystal display for viewing the temperature and diagnostic codes, the on/off/summer/winter/reset/heating temperature/ Amico Climate System activation selector, the domestic hot water temperature/pre-heating activation selector, the Hydrometer. The wall-mounted hydraulic fittings, the sanitary taps and the gas tap are not included in the package. GUARANTEED SAVINGS AND HIGH COMFORT Gas consumption is always very low . This new version complies with the new standards on exhaust gas emissions (NOx 6) and the ErP Directive 2015 ; the boiler benefits from Energy Classes C in Heating and B in Sanitary . Everything is born in the name of savings, starting from the purchase price up to the management of consumption. Maximum comfort with minimum expense. TECHNICAL FEATURES Class B/C NOx class 6 - ErP version, equipped with 6 m low consumption circulator Double exchanger: primary and sanitary plate with pre-heating option 8 litre expansion vessel Provision for climate control (optional external probe to be purchased through CAT) Electrical protection degree IPX5D Hydraulic fittings, gas taps and optional sanitary fittings 3-way valve with anti-lock cycle system Smoke control thermostat By-pass on the heating circuit Electronic board with self-diagnostic function and anti-freeze protection Simple and intuitive digital display On/off/summer/winter/reset/heating temperature/Climate Friend System activation selector Domestic hot water temperature selector/preheating activation Hydrometer Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER HAS IRREGULARITIES ALONG THE LOWER GRILLE, A REPAIR TO THE INTERNAL PLASTIC, FRONT BULKS, FRONT RECESS, SIDE CURVE AND A SLIGHTLY IRREGULAR REAR SUPPORT. (FOR MORE INFORMATION ON THE DAMAGE VIEW THE FOLLOWING PHOTOS) Technical Features Model : Divacondens D Plus Nominal Thermal Power: 24 kW Power supply: Methane The boiler will be supplied with methane, for operation with LPG you must contact the local Authorised Assistance Centre Energy Efficiency Specifications according to European ErP Directive Heating Energy Efficiency Class: B Seasonal Energy Efficiency for Space Heating: 89% Performance Heating Thermal Capacity: 7.5 ~ 25.0 kW Heating Thermal Power: 7.2 ~ 24.2 kW Thermal efficiency ultile 30% Pmin : 100,1 % Domestic Hot Water Production 25°C Δt 30°C : 13.9 ~ 11.6 l/min NOx Emissions 6 Dimensions and Weight Dimensions (LxHxD): 400x700x330 mm Weight: 35 Kg Ferroli Divacondens D Plus Boiler The Simplest Solution For A Condensing Boiler DIVACONDENS D PLUS is the condensing heat generator for traditional heating systems. The proven Ferroli technology in the field of traditional wall-mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator that preheats the primary circuit using the residual heat of the exhaust fumes and a new cooled burner with low NOx emissions. The Range Divacondens D Plus is offered in a single model for heating and instantaneous production of domestic hot water Characteristics > Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct flow to systems with low temperature radiant panels > Compact geometry primary exchanger > Instantaneous production of domestic hot water with dedicated plate exchanger > Post-recovery of the latent heat of condensation, as a pre-heating function of the primary circuit > Sealed chamber and forced draught boiler, with water-cooled atmospheric burner with low NOx emissions > Automatic hydraulic by-pass as standard > Minimum polluting emissions (class 6 according to EN 15502-1) > High efficiency, low consumption circulator (ErP - Class A) with anti-blocking system through activation for a few seconds every 24 hours of inactivity > Can be combined with the modulating remote control > Simple and complete control panel, display user interface, with setting buttons > Robust post-condenser powered by the primary closed circuit. Heat exchange with the flue gases occurs inside large diameter water passages. > Generator with simple and rational operation > ECO function in sanitary mode for greater savings in periods of low hot water usage > Solar system provision: provision for the production of domestic hot water combined with solar panel systems > Installation location: also for outdoor use in a partially protected place up to -5°C as standard > Certified operation also with propane air (50% air - 50% G31) through a specific conversion to be requested from the Authorized Assistance Center > Also works with LPG using a special conversion kit to be requested from the Authorized Service Center Boiler check The DIVACONDENS D PLUS control unit consists of an easy-to-use interface with a backlit display. Using the buttons, you can easily adjust the heating flow temperature, the domestic hot water setpoint, turn the generator on/off or activate the comfort function, monitoring the boiler status. The control panel is completed by a traditional pressure gauge that can check the system pressure at any time. The performances Energy classification Domestic hot water load profile (maximum flow rate at the corresponding declared efficiency in domestic hot water) Efficiency in domestic hot water production FOR COMBINATION BOILERS The “climate-energy 20/20/20” package includes ambitious objectives for reducing greenhouse gas emissions, energy consumption and increasing the use of renewable energy, corresponding to a percentage of 20% to be achieved by 2020. In this context, the European ErP (Energy Related Products) regulation introduces an energy classification also for hot water generators for space heating and domestic hot water. This classification translates into an energy label that must accompany all products affected by the Regulation, introduced on the market from 26 September 2015. The labelling is an easy guide for the consumer, who can choose - through standardised and objective indications - the most efficient product. In this way the choice will be the most economical in consumption for the benefit of the user, but also the most virtuous for energy balances and consequently, for the environment. The most significant parameters indicated on the label are the seasonal efficiency index in heating and efficiency in the possible production of domestic hot water, according to a scale that in the case of the single boiler product ranges from A to G*. Furthermore, for combined boilers a load profile is indicated corresponding to the domestic hot water flow rate of the appliance measured in a series of standard samplings, guaranteeing at least the declared domestic hot water efficiency. This index is identified with a letter/”size” (S, M …XXL). Solar circuit integration DIVACONDENS D PLUS boasts electronics that simplify integration with solar thermal systems, both natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and turns on the burner only when necessary. To reach the desired temperature, SUN EASY allows significant savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. In the event of insufficient radiation and therefore modest preheating of the domestic water, the boiler will contribute with the heat necessary to reach the required setpoint temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the mixing of the thermostatic valves. Safety and comfort ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator activates in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function allows you to recover all the heat provided by the thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (with customizable duration) and is active after the burner switches off in heating mode. SLIDING TEMPERATURE OPERATION By installing the “External probe” kit, it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment buttons, the boiler will self-regulate based on variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The DIVACONDENS D PLUS electronic board uses the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. The Opentherm standard has in fact been specifically designed to share the boiler's operating logic and algorithms with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the boiler's functions and similarly from its satellite. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less