Technical features INDOOR UNITS 1) Model: Series: Free Model: SC09EQ NSJ Power (btu/h): 9000 Dimensions mm WxHxD: 837x308x189; 8.7Kg 2) Model: Series: Free Model: SC12EQ NSJ Power (btu/h): 12000 Dimensions mm WxHxD: 837x308x189; 8.7Kg Outdoor unit Model: Catalog code : MU2R17 UL0 Gases : R-32 Power (V/Hz/Φ) : 1220~240-50 Max indoor units that can be combined: 2 Energy efficiency: SEER: 7.8 SCOP: 4.2 Energy Efficiency Class (Cool) : A+++ Energy Efficiency Class (Heating) : A+ Performance: Cooling Capacity (kW): 4.7 Heating capacity (kW): 5.3 Operating limits: Cool Min~Max °C -10~48 Heating Min~Max °C -18~18 Dimensions and weight Outdoor Unit WxHxD (mm): 770 x 545 x 288; 37kg General characteristics LG MULTISPLIT With Multi Split systems LG, you don't need to buy multiple outdoor units to air-condition all the rooms in your home. All you need to do is install one unit to have the optimal climate in 9 different environments.   BLDC Compressor (Brushless Direct Current Motor) The outdoor units of the Multi range are equipped with BLDC compressors equipped with motors with neodymium magnets. These compressors are characterized by higher energy efficiency than traditional inverter compressors, and operate optimally in all rotation conditions. This guarantees high seasonal energy efficiency values. Smart Load Control Energy saving at startup By choosing the Smart Load Control function via the micro-switches of the outdoor unit, the temperatures of the refrigerant on the heat exchangers are changed automatically according to the outdoor temperature and the temperature set for the rooms. During the first 30 minutes of operation, it is possible to achieve energy savings of up to 35% compared to traditional products, also improving the level of perceived comfort. This function allows you to keep the maximum electrical consumption of the outdoor unit within a pre-set limit, to avoid automatic disconnection of the meter or to limit absorption. Energy saving during operation After 30 minutes from starting in Smart Load Control mode, the outdoor unit continues to change the chiller temperature according to the heat load. Wide Louver heat exchanger The Wide Louver fin heat exchanger is applied to the outdoor units. The particular processing of these fins allows to considerably improve the exchange capacity of the radiator compared to a traditional exchanger Wide operating range The outdoor units of the Multi Pipe range can operate in cooling and heating mode under the most extreme conditions. The presence as standard equipment of the condensation control for the cooling mode makes them compatible with all applications where it is necessary to refresh the air even at low external temperatures (e.g. restaurants, gyms, server rooms). Pressure controlled operation The new units in the Multi-pipe range operate with control based on the pressure of the refrigerant in the circuit: this type of control ensures better management of the peripherals contained in the units compared to traditional temperature controls. This control mechanism is more precise and refined, without being negatively affected by external temperature variations. The new technology applied to these products makes it possible to obtain the desired results in shorter times, to better manage the operation of the compressor under partial load conditions, and to achieve significant reductions in the electrical current absorbed. Stand-by mode This function allows you to remove the power supply to the system components during the stand-by phase of the system. In this way, the stand-by electricity consumption of the multi-pipe Multi outdoor units is 90% lower than the previous versions. Noise reduction mode Thanks to a series of settings applicable to the units via the electronic card, it is possible to reduce the noise level of the outdoor units during the night, to the advantage of the comfort and livability of residential complexes. The adoption of a new fan protection grille and the use of fans with details specifically designed for aerodynamic optimization have allowed a reduction in the noise level of the outdoor units in the order of about 2 dB(A) at nominal conditions of detection. Lightweight and compact units The LG outdoor units of the Multi range have been designed and built with a rational design and reduced in size and weight lower when compared with that of the previous units. This makes them easy to handle and easy to install. New LG Free Compact unit and minimal design, for high cooling performance and maximum comfort. Inverter compressor guaranteed for 10 years   LG, which places great faith in the quality and reliability of its products, offers a 10-year warranty on the Inverter compressor of all mono and multi-split models featured in this catalogue. *The above warranty covers the costs of the Inverter compressor only for a total period of 10 years from the date of purchase of the air conditioner. Any other cost other than the value of the replaced component alone is to be considered excluded from coverage. Style and elegance   An elegant product, with attention to detail and modern lines, which embellishes any environment. Energy saving LG's advanced and efficient Inverter technology and energy saving functions guarantee high-level performance and minimum consumption. Energy Display monitors energy consumption levels, to save money and, at the same time, enjoy a cool and comfortable environment. Cool jets The Jet Cool function allows the compressor to rotate at a speed higher than the maximum normally available, to allow domestic environments to be cooled by reducing the internal temperature by up to 5°C in just 5.6 minutes. Jet Cool: immediate relief even in the hottest summers. Compatibility LG introduces the new wall mounted units , usable in mono and multisplit configuration. Compatibility makes it possible to obtain the maximum cooling and heating capacity and, above all, to be able to integrate different systems in the same application, preserving the aesthetic continuity of the indoor units. Simplified installation   Installing an air conditioner has never been easier! LG products are designed and manufactured to be installed quickly and efficiently. And the small size of the indoor and outdoor units also saves space. Other characteristics: Automatic cleaning and drying cycles of the heat exchanger itself, to eliminate bad smells and the formation of mold and bacteria. Energy Display Monitoring of instantaneous consumption via retractable LED display LG air conditioners cool rooms quickly and effectively, to allow you to enjoy fresh and comfortable environments for longer. The fresh air flow is blown in all directions, regardless of the installation position of the unit. The double protection filter collects dust and bacteria, to ensure clean air for your home. Gold Fin treatment special protective treatment of the heat exchanger of the outdoor unit from corrosion phenomena, with a gold-coloured coating. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features SEER: 8.00; SCOP: 4.20; Energy Class: A++; Energy Class: A+; Power: 9000 + 9000 + 9000 + 12000 BTU; Covered surface: from 15 to 25 m2 split 9000, from 25 to 40 m2 split 12000; Cooling performance: Capacity: 7.9kW; Annual energy consumption: 346 kWh; Absorption: 1.8 kW; Absorbed current: 8.1 A; Operating range Min.~Max.: °C -10 ~ +24 ; Heating performance: Capacity: 9.1kW; Annual energy consumption: 2333 kWh; Absorption: 2.1 kW; Absorbed Current: 9.4A; Min.~Max Operation Range: ℃ -10 ~ +48; Internal unit sound pressure (min/max): 19/40 dBA; Indoor unit sound power: 57 dBA; Outdoor unit sound pressure: 50/54 dBA; Outdoor unit sound power level High: 65 dBA; Dehumidification capacity: 1.1/1.9 l/h; Power supply (V/Hz/Φ) : 230/50/1; Refrigerant gas : R32; Pipe connections Liquid/Gas: 6.35 (1/4") /9.53 (3/8") mm (inch); Max. Piping length: m 70; Max height difference IU - UE: m 15; Composed of: Indoor Unit: 3x SC09EQ NSJ + 1x SC12EQ NSJ; Outdoor Unit: MU4R25 ; Dimensions Indoor Unit (WxHxD): 837x308x189 mm; Weight: 8.5Kg External Unit (WxHxD): 950x834x330 mm; Weight: 61.0 Kg General characteristics LG air conditioners are designed to make the most of giving the comfort you want most, studied by extremely elegant lines that blend in with any decor, a simple and modern design with attention to the smallest details, all managed by high technology and control in energy consumption given its LED display which gives you the possibility to control them. Furthermore, having the Skew Fan, the low vibration technology of the compressor and the DC BLDC ventilation motor allow LG air conditioners to drastically lower noise levels, guaranteeing quieter environments with only 19 dB (A). The maximum silence of LG air conditioners guarantees comfort and peace for the whole family, but not only, also thinking of the neighbors, with the Silent Mode function, in fact, it is possible to reduce the rotation frequency of the compressor and fan of the outdoor unit, lowering the sound power level by about 3 dB(A) compared to normal operation. The Libero air conditioner is managed by multiple functions designed to give maximum comfort. In particular, LG has also introduced the brand new R32 gas into its products, which works at pressures similar to R410 gas, but simplifies the refill operations and the tools used to install the system are the same ones used for gas systems. R410A (with the exception of checking the compatibility of the pressure gauge, leak detector and recuperator). It also complies with European regulations that will come into force in a few years. Functions: Jet cool: This is the function that allows you to reach the desired temperature in 5/6 minutes with low consumption; Auto Cleaning: this is the function that automatically cleans and sanitizes the exchanger to prevent the formation of mold and bacteria and to eliminate bad smells; Energy Display: for monitoring electricity consumption via a retractable display; Comfort Air: this is the function that keeps the rooms cool for longer; Vertical and horizontal control: it is the directional control of the air for a homogeneous distribution of the air; Active Capacity Control: Electronic control in two stages through the special intuitive remote control (between 80% and 60% compared to the normal operating condition). Double protection filters: The double protection filter collects dust and bacteria, to ensure clean air for your home; Protection of the outdoor unit: Through a Gold Fin treatment, protective treatment of the heat exchanger of the outdoor unit from corrosion phenomena, with a gold-colored coating. Advantages: Advantages: Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

LG STANDARD WIN series Inverter Air Conditioner DualCool 12000 btu R-32 S12ER - NEW Cooling performance Nominal capacity kW 3.5 SEER 5.9 Energy class A+ Cooling performance Rated capacity kW 4.0 SEER 3.8 Energy class A Characteristics: Sound pressure db(A) 19/41 Sound power db(A) 59 Dehumidification l/h 1.1 Operation range -10/48 / -10/24 Dimensions Indoor unit HxWxD mm 837x308x189 Outdoor unit HxWxD mm 717x483x230 STANDARD WIN DUALCOOL Dual inverter compressor A single compressor with double rotary, completely revised design both in the structure and in the mechanical parts, this guarantees stability and efficiency and rapid cooling. All this makes the air conditioner more reliable, with a reduction in vibrations and consequently lower sound pressure levels. 10-year warranty on the inverter compressor LG, which places great faith in the quality and reliability of its products, offers a 10-year warranty on the Inverter compressor of all mono and multi-split models featured in this catalogue. *The above warranty covers the costs of the Inverter compressor only for a total period of 10 years from the date of purchase of the air conditioner. Any other cost other than the value of the replaced component alone is to be considered excluded from coverage. Smart Diagnosis  The Smart Diagnosis function allows you to check settings, troubleshoot and check other information directly from your smartphone Active Energy Control Active Energy Control (or Active Capacity Control ) allows you to regulate energy consumption levels and total cooling capacity by controlling the maximum frequency of the compressor motor. Other characteristics Energy Display Noise reduced up to 10 db Comfort Air Double protection filters Self Cleaning Jet Cool Rapid heating Gold Fin All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

If the product is not available, the next model will be supplied. News of the year --> ( click HERE) Technical features Indoor unit 1) Model: Series: Libero Plus Model: PM07SP NSJ x 2 Power (btu/h): 7000 Dimensions mm WxHxD: 837x308x189; 8.7Kg Outdoor unit Model: Catalog code : MU2R15 UL0 Gases : R-32 Power (V/Hz/Φ) : 1220~240-50 Max indoor units that can be combined: 2 Energy efficiency: SEER: 8.5 SCOP: 4.2 Energy Efficiency Class (Cool) : A+++ Energy Efficiency Class (Heating) : A+ Performance: Cooling Capacity (kW): 4.1 Heating Capacity (kW): 4.7 Operating limits: Cool Min~Max °C -10~48 Heating Min~Max °C -18~18 Dimensions and weight Outdoor Unit WxHxD (mm): 770 x 545 x 288; 37kg General characteristics LG MULTISPLIT With LG Multi Split systems, you don't need to buy multiple outdoor units to air-condition all the rooms in your home. You just need to install one unit to have the optimal climate in 9 different environments LG's cutting-edge technologies achieve the lowest energy consumption, in particular the SEER evaluation is positive as regards ErP regulation. Style and design With their design, LG indoor units embellish environments: choose the inimitable style of Artcool Gallery and Artcool Mirror to give a unique touch to your home. BLDC Compressor (Brushless Direct Current Motor) The outdoor units of the Multi range are equipped with BLDC compressors equipped with motors with neodymium magnets. These compressors are characterized by higher energy efficiency than traditional inverter compressors, and operate optimally in all rotation conditions. This guarantees high seasonal energy efficiency values . The components of the BLDC Inverter Twin Rotary compressor have been improved to ensure a longer product life cycle. Smart Load Control Energy saving in start-up By choosing the Smart Load Control function via the micro-switches of the outdoor unit, the refrigerant temperatures on the heat exchangers are changed automatically according to the outdoor temperature and the set room temperature. During the first 30 minutes of operation, it is possible to achieve energy savings of up to 35% compared to traditional products, also improving the level of perceived comfort. This function allows you to keep the maximum electrical consumption of the outdoor unit within a pre-set limit, to avoid automatic disconnection of the meter or to limit absorption. Energy saving during operation After 30 minutes from starting in Smart Load Control mode, the outdoor unit continues to change the chiller temperature according to the heat load. Inverter compressor guaranteed for 10 years LG, which places great faith in the quality and reliability of its products, offers a 10-year warranty on the Inverter compressor for all mono and multi-split models. *The above warranty covers the costs of the Inverter compressor only for a total period of 10 years from the date of purchase of the air conditioner. Any other cost other than the value of the replaced component alone is to be considered excluded from coverage. Safety and Durability Assured - Optimized BLDC Inverter Twin Rotary compressor - Pressure controlled operation via Smart Sensor - Black Fin heat exchanger Other characteristics.. Heat exchanger Wide Louver Plus Fin The Wide Louver Plus Fin heat exchanger is applied to the outdoor units. The particular configuration of the fins makes it possible to considerably improve the exchange capacity of the radiator compared to a traditional exchanger, up to 11% at full load and up to 6% in terms of COP. Wide operating range The outdoor units of the Multi Pipe range can operate in cooling and heating mode under the most extreme conditions. The presence as standard equipment of the condensation control for the cooling mode makes them compatible with all applications where it is necessary to refresh the air even at low external temperatures (e.g. restaurants, gyms, server rooms). Pressure controlled operation via Smart Sensor The new units in the Multi-pipe range operate with control based on the pressure of the refrigerant in the circuit: this type of control ensures better management of the peripherals contained in the units compared to traditional temperature controls. This control mechanism is more precise and refined, without being negatively affected by external temperature variations. The new technology applied to these products makes it possible to obtain the desired results in shorter times, to better manage the operation of the compressor under partial load conditions, and to achieve significant reductions in the electrical current absorbed. Black Fin heat exchanger The black coating with reinforced epoxy resin is applied to ensure protection against various corrosive external conditions such as salt contamination and air pollution including factory exhaust fumes. In addition, the hydrophilic film prevents water from accumulating on the heat exchanger fin, minimizing moisture build-up and further increasing corrosion resistance. Noise reduction mode Thanks to a series of settings applicable to the units via the electronic card, it is possible to reduce the noise level of the outdoor units during the night, to the advantage of the comfort and livability of residential complexes. The adoption of a new fan protection grille and the use of fans with details specifically designed for aerodynamic optimization have allowed a reduction in the noise level of the outdoor units in the order of about 2 dB(A) at nominal conditions of detection. LG Free Advanced technologies inside a product with a simple and linear design Dual Inverter compressor with 10 year guarantee LG's Inverter technology ensures maximum efficiency and excellent performance, for an air conditioner that cools faster, lasts longer and operates more silently. The compressor is guaranteed for 10 years, to enjoy the benefits of LG air conditioning for an even longer period of time. 10-year guarantee - 10-year product life cycle verification by TÜV Rheinland TÜV Rheinland - Accelerated aging test for evaluation of reliability over time and High Margin Rate Test. Energy saving The inverter compressor constantly adjusts the rotation speed to maintain the desired temperature level. Furthermore, the DUAL Inverter compressor, thanks to the energy saving functions, allows to reduce energy consumption compared to a traditional compressor The Dual Inverter compressor allows stable and balanced operation, with a consequent reduction in vibrations when starting and stopping the air conditioner, the main cause of noise. This also reduces the possibility of any breakage or damage to the pipes. Fast cooling The low temperature air jet reaches every corner of the room, making the environment comfortable and welcoming. How does it work: A 25% larger fan blows more powerful air. A wider and perfectly designed fresh air flow allows you to reach even the furthest corners and cool the room faster. Smart Energy Display   Save energy by monitoring the level of consumption directly from the display of the indoor unit and enjoy cool and comfortable environments while saving. How does it work By pressing the 'ENERGY CTRL' button on the remote control, the display of the indoor unit shows the instantaneous energy consumption, allowing the user to be informed about the consumption of the product and to change, if necessary, the settings to reduce the electricity consumption Advantages - in normal mode, The display shows the operating temperature - Electricity consumption, The display shows the instantaneous electric current absorbed Additional benefits - Fan speed display Maximum silence LG air conditioners ensure reduced noise thanks to the special Skew Fan and Inverter compressor, which eliminate unnecessary noise and allow the product to operate as quietly as possible. Skew Fan - The fans of the indoor units are made with the use of inclined fins with respect to the axis of rotation, in order to reduce friction with the air, which causes noise Low Vibration Twin Rotary Compressor - The adoption of two opposing rotors in the compressor cylinders allows to reduce the torque by 40% compared to traditional rotary compressors. The double rotor ensures stability and minimizes vibrations. Active capacity control The Active Capacity Control function allows you to select the level of energy consumption based on the usage situation. Enjoy a cool and comfortable environment in the name of energy saving. Concepts and Benefits Simultaneous operation of several appliances could cause the meter to disconnect. With the Active Capacity Control function you can take advantage of the 4-step consumption control system and use several appliances at the same time, remaining within the standard capacity of 3kWh 2 energy consumption levels (80% and 60% with respect to normal operating conditions), which can be set using an infrared command. Comfort Air LG air conditioners cool rooms quickly and effectively, to allow you to enjoy fresh and comfortable environments for longer Concept: During the night, the air conditioner can lower your body temperature and cause discomfort to people in the room, especially if the air blows directly on them. In order to avoid this, the Comfort Air mode adjusts the angle of inclination of the flap and ensures a peaceful sleep. The Comfort Air function adjusts the inclination of the deflector avoiding direct flows to the people present in the room. Ease of installation LG air conditioners are designed to be installed simply and efficiently, regardless of the environment in which they are placed and the number of people involved in the installation process, allowing for a reduction in installation times. Other characteristics Automatic cleaning and drying cycles of the heat exchanger itself, to eliminate bad smells and the formation of mold and bacteria. The fresh air flow is blown in all directions, regardless of the installation position of the unit. Active capacity control 2 levels of energy consumption (80% and 60% with respect to the normal operating condition), settable via infrared command. Heating the rooms of your home with LG residential air conditioners is easy and convenient, thanks to an immediate, natural and low-consumption heating action. The double protection filter collects dust and bacteria, to ensure clean air for your home. Gold Fin treatment special protective treatment of the heat exchanger of the outdoor unit from corrosion phenomena, with a gold-colored coating. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

LG DELUXE Inverter Air Conditioner 12000 btu R-32 Nano UV Integrated Wi-Fi Voice Control DC12RH - NEW Cooling Capacity Min W 890 Nominal Capacity Cooling W 2500 Capacity Cooling Max W 3700 Capacity Heating +7°C Min W 890 Capacity Heating +7°C Nominal W 3200 Capacity Heating +7°C Max W 5000 Capacity Heating -7°C Nominal W 3200 Absorbed power Cooling Min-nom-max W 572 Power Input Heating +7°C Min-nom-max W 711 SEER 7 ,9 SCOP 4.6 Energy Label Cooling A++ Energy Label Heating A++ Annual consumption Cooling kWh 111 Heating kWh 852 Sound pressure Cooling Sleep dBA+1 19 Sound Pressure Cooling Min dBA+1 27 Sound Pressure Cooling Medium dBA+1 37 Sound Pressure Cooling High/Max dBA+1 42/45 Sound Pressure Heating Min dBA+1 27 Sound Pressure Heating Medium dBA+1 37 Sound Pressure Heating High/Max dBA+1 42 Sound power level Cooling High dBA 60 Ventilation capacity Cooling Sleep ?/min 3.5 Dehumidification l/h 1.1 Nominal Cooling Absorbed Current A 2.5 Current Cooling Max A 6.0 Current Heating Nominal A 3.2 Current Heating Max A 7.0 Power supply Φ / V /Hz 1 / 220-240 / 50 Dimensions 837*308*189 mm Weight kg 9.1 External operating limits Cooling Min~Max °CDB -15~48 Operation Range Heating Min~Max °CWB→°CDB -15~24 Sound Pressure Cooling High dBA+1 49 Sound Power Cooling High dBA 65 Air Flow Rate Cooling High ?/min 35 Liquid pipe mm 6.35 Piping Connection Liquid inch (1/4) Piping Connection Gas mm 9.52 Piping Connection Gas inch (3/8) Drain 21.5 mm inch 27/32 Refrigerant Type R32 Refrigerant GWP 675 W 43 fan Compressor type TWIN Rotary Weight kg 25.1 Dimensions mm 770*545*288 DELUXE UVnano system The indoor units are equipped with the new UV NANO system The new UV LED technology "Uvnano" is applied to LG Artcool and keeps the fan (inside the unit) 99.99% bacteria-free by ultraviolet light to ensure that even the air that passes is clean. Ventilator Sterilization System Using the UV (ultraviolet) LED, it sterilizes the air and the FAN inside the SPLIT unit. Ultraviolet rays of UVC wavelength directly damage the DNA of microorganisms (bacteria / MOLDS / viruses), making it impossible for them to multiply. Plasmaster Ionization System Indoor unit equipped with Ionizer emitting negative ions according to the PM degree measured by the detector. The green LED identifies its ignition and ion emission. BUILT-IN Wi-Fi Indoor unit with integrated Wi-Fi to manage the main functions through the Smart ThinQ app available for Android or iOS. Voice control Indoor unit compatible with Google Home voice assistants. Available functions : Power on Shutdown Temperature regulation Operating mode setting Ventilation adjustment Monitoring Total control of air flows By pressing the button on the infrared control, the deflector is positioned automatically according to the selected operating mode. In heating the deflector adjusts to the lowest position while in cooling it is set to the highest position. Comfort Air function By pressing the button on the infrared control, the deflector is positioned automatically according to the selected operating mode. In heating the deflector adjusts to the lowest position while in cooling to a higher position. Active capacity control Control of energy consumption in 4 steps using a button on the infrared control. NORMAL 100% CONSUMPTION: Premises with several people, with a high degree of activity. STEP1 80% CONSUMPTION: Premises with more people, with a reduced level of activity. STEP2 60% CONSUMPTION : Premises with few people, with a reduced degree of activity. STEP2 40% CONSUMPTION : Premises with few people, with a very low degree of activity Smart Diagnosis Smart Diagnosis allows you to check the functionality and troubleshoot via smartphone with a simple SMART DIAGOSIS app available for android devices.

Read more less

Technical features Indoor unit catalog code : S18EQ.NSK Outdoor unit catalog code : S18EQ.UL2 Power : 18000 Btu Energy efficiency SEER : 7.0 SCOP : 4.3 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual Energy Consumption in Cooling : 250 kWh/a Annual Energy Consumption in Heating: 1270 kWh/a Performance Cooling Capacity: 5.0 kW Heating Capacity: 5.8 kW Cooling absorption: 1.56 kW Heating absorption: 1.61 kW Sound Power Level Indoor Unit : 60 dB(A) External Unit Sound Power Level: 65 dB(A) Sound Pressure Level Indoor Unit : 31~44 dB(A) Sound Pressure Level Outdoor Unit : 53 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -15° ~ 48°C - Heating: -10° ~ 24° C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 12.70 mm (1/2") Maximum piping length: 20 m Maximum height difference Indoor Unit / Outdoor Unit: 10 m Dimensions and weight Internal Unit Dimensions (WxHxD): 998x345x210 mm Indoor Unit Weight: 11.9 Kg External Unit Dimensions (WxHxD): 770x545x288 mm Weight of Outdoor Unit: 34.4 Kg Dual Inverter compressor guaranteed for 10 years   LG, which places great faith in the quality and reliability of its products, offers a 10-year warranty on the Inverter compressor of all mono and multi-split models featured in this catalogue. The warranty mentioned above covers the costs of the Inverter compressor only for a total period of 10 years from the date of purchase of the air conditioner. Any other cost other than the value of the replaced component alone is to be considered excluded from coverage. LG Libero S Energy saving Inverter technology is able to modulate the power supplied according to actual needs. This allows you to keep the temperature constant, avoiding energy waste, in favor of greater efficiency and maximum energy savings Fast cooling A wider and perfectly designed airflow allows you to reach even the furthest corners and cool the room faster Check how much energy you consume Save energy and monitor consumption via the Smart Energy Display Maximum silence LG air conditioners ensure reduced noise thanks to the special Skew Fan and Inverter compressor, which eliminate unnecessary noise and allow the product to operate as quietly as possible. Check the energy consumption With LG's Active Energy Control function button, you can adjust the energy consumption according to three settings (80%, 60%, 40%). Just press a button to control the cooling efficiency and reduce energy consumption Comfort Air Automatically sets the angle of the louvre so that the outgoing airflow is not aimed directly at the occupants of the room Ease of installation LG air conditioners are designed and manufactured to be installed quickly and efficiently, reducing labor and installation time Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

LG Dual Split Inverter Air Conditioner ATMOSFERA 9+12 series with MU2R17 R-32 Integrated Wi-Fi 9000+12000 Indoor Units 1) Model Internal Unit Catalog Code: AP09RT.NSJ Power : 9000 Btu Internal Unit Dimensions (WxHxD): 857x348x189 mm Indoor Unit Weight: 9.5 Kg 2) Model Internal Unit Catalog Code: AP12RT.NSJ Power : 12000 Btu Internal Unit Dimensions (WxHxD): 857x348x189 mm Indoor Unit Weight: 9.5 Kg Outdoor unit Model: Catalog code : MU2R17 UL0 Gases : R-32 Power (V/Hz/Φ) : 1220~240-50 Max indoor units that can be combined: 2 Pipe diameter liquid gas 1/4 " - 3/8" Energy efficiency: SEER: 7.8 SCOP: 4.2 Energy Efficiency Class (Cool) : A+++ Energy Efficiency Class (Heating) : A+ Performance: Cooling Capacity (kW): 4.7 Heating capacity (kW): 5.3 Operating limits: Cool Min~Max °C -10~48 Heating Min~Max °C -18~18 Dimensions and weight Outdoor Unit WxHxD (mm): 770 x 545 x 288; 37kg Dual Inverter compressor guaranteed for 10 years   LG, which places great faith in the quality and reliability of its products, offers a 10-year warranty on the Inverter compressor of all mono and multi-split models featured in this catalogue. The warranty mentioned above covers the costs of the Inverter compressor only for a total period of 10 years from the date of purchase of the air conditioner. Any other cost other than the value of the replaced component alone is to be considered excluded from coverage. LG Multisplit systems LG is among the world's leading manufacturers of air conditioners. The MULTISPLIT product range is characterized by high flexibility, very high energy efficiency and low noise levels. Multisplit solutions make it possible to address both the needs of small residential systems and the needs of commercial spaces. Quality and Safety Guarantee LG is extremely attentive to the quality of its products and to environmental issues. LG offers on its air conditioners, in addition to the 24-month statutory warranty, an additional 3-year warranty on compressors, an exclusive formula to let you choose in full safety. All LG air conditioners have obtained the most important international quality and safety certifications. All LG air conditioners are made with environmentally friendly technologies and use R-410A refrigerant which does not produce deleterious effects on the ozone layer. The high energy efficiency that characterizes them helps to reduce CO2 emissions. LG adheres to collective collection systems that guarantee a completely safe disposal service for end-of-life products. Seasonal energy efficiency The outdoor units of the new multi-pipe Multi range are characterized by seasonal energy efficiency levels already in line with the European standards in force since 2014. The SEER level is higher than 6.10 and will allow these products to obtain the A++ classification for their seasonal cooling energy efficiency. The new Multi range with multiple pipes makes it possible to reduce energy consumption by 37% (average) compared to the previous series. Multi outdoor units are characterized by extremely high levels of energy efficiency. Thanks to this premise, they contribute significantly to the reduction of carbon dioxide emissions. Wide Louver heat exchanger Thanks to this premise, they contribute significantly to the reduction of carbon dioxide emissions The heat exchanger with Wide Louver fins is applied to the outdoor units. The special processing of the fins improves the exchange capacity of the radiator by 28% for the same surface area compared to a traditional exchanger. Wide operating range The outdoor units of the Multi Pipe range can operate in cooling and heating mode under the most extreme conditions. The presence as standard equipment of the condensation control for the cooling mode makes them compatible with all applications where it is necessary to refresh the air even at low external temperatures (e.g. restaurants, gyms, server rooms).   Pressure controlled operation The new units in the Multi-pipe range operate with control based on the pressure of the refrigerant in the circuit: this type of control ensures better management of the peripherals contained in the units compared to traditional temperature controls. This control mechanism is more precise and refined, without being negatively affected by external temperature variations. The new technology applied to these products makes it possible to obtain the desired results in shorter times, to better manage the operation of the compressor under partial load conditions, and to make significant reductions in electric current absorbed. Wiring error checking function Thanks to this function, at the end of the installation work it is possible to verify that the electrical and piping connections are correctly associated. Through this control function, which can be activated from the electronic board of the outdoor unit, it is possible to achieve a correct and fully functional installation quickly and easily. Reduced power consumption in Stand-by An innovative function allows you to remove the power supply to the system components during the stand-by phase of the system. In this way, the stand-by electricity consumption of the new multi-pipe Multi outdoor units is 90% lower than the previous versions. Reduced sound level The adoption of a new fan protection grille and the use of fans with details specifically designed for aerodynamic optimization have allowed a reduction in the noise level of the outdoor units in the order of about 2 dB(A) at nominal conditions of detection. LG Atmosphere Cleanliness and freshness LG air conditioners are characterized by a 2-in-1 purification system (air cooling and filtration) capable of filtering fine dust, germs and pollutants such as PM 1.0. Smart 4-color display The PM 1.0 sensor detects ultra-fine dust in real time and shows the level of air quality in 4 different colors Energy saving Inverter technology is able to modulate the power supplied according to actual needs; this makes it possible to keep the temperature constant, avoiding waste of energy, in favor of greater efficiency and maximum energy savings Fast cooling A wider and perfectly designed airflow allows you to reach even the furthest corners and cool the room faster. Check how much energy you consume The slim and modern designs of LG air conditioners make installation easier and cleaning the product more convenient thanks to the EZ sliding filter. In addition, the retractable display is perfect for convenient control of the energy display. Maximum silence LG air conditioners ensure reduced noise thanks to the special Skew Fan and Inverter compressor, which eliminate unnecessary noise and allow the product to operate as quietly as possible. Ease of installation LG air conditioners are designed to be installed simply and efficiently, regardless of the environment in which they are placed and the number of people involved in the installation process, allowing for a reduction in installation times. Perfect adherence to the Wall More space for piping Installation plate with anchor screws Removable bottom panel Lifting clips 6-step vertical flow control You can choose from 6 preset positions to meet your different needs in terms of airflow direction. Auto Cleaning The efficient Auto Cleaning function prevents the formation of bacteria and mold on the heat exchanger, creating a more pleasant and comfortable environment. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM161MR U34 Energy efficiency EER: 4.0 SCOP : 4.7 Energy efficiency class in heating: A+++/A++ Performance Cooling capacity : 16.0 kW Heating capacity: 16.0 kW Nominal flow rate : 2760 l/h Sound power level : 61 dB(A) Sound pressure level : 39 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 80° C Installation data Inlet Pipe Diameter : 25.4 mm (1") Male Outlet piping diameter : 25.4 mm (1") Male Dimensions and weight External unit dimensions (WxHxD): 1239x1380x330 mm Outdoor unit weight: 118.6 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and need What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. What is a heat pump? The LG THERMA V air-to-water heat pump provides heating, cooling and domestic hot water without using fossil fuels, providing 100% renewable energy for an efficient and comfortable home The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monoblock THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO 2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outside temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Catalog code : HM143MR U34 Power : 14 kW Color : Silk gray / RAL 7044 Energy efficiency SCOP: 3.46 Seasonal heating efficiency: 135% Energy efficiency class in heating: A++ Performance Cooling Capacity: 14.0 kW Heating Capacity: 14.0 kW Nominal flow rate : 40.3 l/min Sound Power Level : 57~61 dB(A) Sound Pressure Level : 35~39 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating Limits Waterfall Cooling: -15° ~ 65°C Heating: 5° ~ 27°C DHW : 15° ~ 80° C Air Cooling: -25° ~ 35°C Heating: 5° ~ 48° C Installation data Inlet hydraulic circuit piping diameter: 25.4 mm (1") Outlet hydraulic circuit piping diameter: 25.4 mm (1") Dimensions and weight Dimensions (WxHxD): 1239x1380x330 mm Weight : 118.6Kg LG Therma V TM Monoblock S R-32 THERMA V Monobloc S R32 is the second generation of LG's Monobloc R32 which combines the best performance of the THERMA V series and a reduced noise level, thanks to the cutting-edge technology of the "acoustic shield", placed over the compressor to reduce vibrations produced by the operation of the machine. Monobloc S R32 combines the indoor unit and outdoor unit as a single module and is connected only by water pipes, eliminating the need for refrigerant pipes. Furthermore, the hydronic components such as plate heat exchanger, expansion vessel, water pump, flow sensor, pressure sensor, air vent valves and safety valve are located inside. inside the unit. Monobloc S R32 provides excellent heating performance, especially at low temperatures, while reducing its carbon emissions Improved installation flexibility All-in-one outdoor unit Low noise that allows high installation flexibility Outdoor unit with built-in hydronic components: water pump, flow meter, pressure sensor, expansion vessel, air vent valve, etc. Easy to use installation settings interface Optional backup electric heaters (3kW or 6kW) Improved connectivity for third party backup electric heaters High efficiency and wide operating range R32 refrigerant with low global warming potential (GWP) Less environmental impact with a low amount of refrigerant 100% heating capacity at -15° C OAT (@ LWT 35° C, except 16kW model) Improved heating operation in defrost conditions SCOP up to 4.67 (average climate / low temperature application): A+++ SCOP up to 3.47 (Average climate / medium temperature application) : A++ COP up to 4.90 (External air 7° C / Supply water 35° C) Delivery water temperature up to 65°C Innovative design and technology Improved heat exchanger design (Black Fin) Integrated water flow and pressure sensors for real-time monitoring Advanced circulator options (optimum flow rate, fixed capacity, fixed flow rate, fixed ?T) Improved 2nd loop control logic Modbus connectivity without gateway Control for the DHW circulation pump according to the program Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM161M U33 Energy efficiency EER : 4 SCOP: 4.45 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 16.0 kW Heating Capacity: 16.0 kW Nominal flow rate : 2760 l/h Sound Power Level Indoor Unit : 63 dB(A) Sound Pressure Level Outdoor Unit : 52 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 55° C Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1239x1380x390 mm Weight of Outdoor Unit: 124.8 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and requirement What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monoblock THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outside temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM121M U33 Energy efficiency EER: 4.6 SCOP: 4.45 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 12.0 kW Heating Capacity: 12.0 kW Nominal flow rate : 2070 l/h Sound Power Level Indoor Unit : 63 dB(A) Sound Pressure Level Outdoor Unit : 52 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 55° C Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1239x1380x390 mm Weight of Outdoor Unit: 124.8 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and need What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monobloc THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outside temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM071M U43 Energy efficiency EER: 4.5 SCOP: 4.45 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 7.0 kW Heating Capacity: 7.0 kW Nominal flow rate : 1206 l/h Sound Power Level Indoor Unit : 60 dB(A) Sound Pressure Level Outdoor Unit : 50 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 55° C Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1239x834x404 mm Weight of Outdoor Unit: 90.8 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and need What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monoblock THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outdoor temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less