Immergas Magnetic cycloidal filter kit 3.024176 Cycloidal filter kit: Magnetic cycloidal filter kit Extremely compact dimensions It allows to intercept the ferrous residues present in the system water. The two standard taps in the kit allow easy maintenance by cleaning the filter without having to empty the circuit PRODUCT DESCRIPTION. The magnetic cycloidal filter allows to intercept the ferrous residues present in the system water. Thanks to the two taps in the kit, it is possible to carry out easy maintenance by cleaning the filter without having to empty the circuit. WARNINGS. The magnets resist up to the maximum temperature of 100 °C, it is therefore advisable not to exceed a temperature between 90 - 95 °C. Magnetic fields: Keep the magnet away from all objects and equipment that could be damaged by the magnetic fields themselves. The magnetic field can affect the operation of pacemakers and internal defibrillators, for safety keep the magnet at a safe distance. CLEAN FILTER. Disconnect power from the boiler, close the tap a upstream of the filter, partially relieve the pressure of the hydraulic circuit (see appliance instruction booklet) then close the second tap of interception (2). Warning: check the water temperature system return pipe is not excessively hot otherwise take precautions to avoid sunburn. Place a container under the filter to collect the water contained in it. Extract the fork and remove the magnetic cartridge pulling it down. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IMMERGAS VICTRIX 28 TT METHANE CONDENSING GAS BOILER Immergas Victrix 28 TT condensing boiler Capacity: 28Kw Useful heating power kW: 24.0 DHW useful power kW: 28.0 Type: snapshot Modulation range: 11 - 100 % Hot water production (∆t 30 °C) l/min: 13.4 Electrical protection degree IPX: 5D Power supply: LPG *For conversion to LPG, contact the Authorized Assistance Centre VICTRIX TT The VICTRIX TT ErP range, intended for new installations and above all for the replacement of existing appliances, has been designed to comply with the new European Directives on the use of energy, increasingly oriented towards condensing technology to more easily reach the efficiency classes high in space heating and in the production of domestic hot water in homes. VICTRIX TT ErP, produced in the new highly automated lines of the company's historic headquarters in Brescello, incorporates the innovative condensing module which guarantees high flow rate and head on the heating circuit, low risk of clogging due to any impurities in the system and greater corrosion resistance thanks to the special alloy with which it is made. Reduced consumption thanks to the class A circulator and boiler power modulation up to 15%: ideal condition for mid-seasons or reduced loads. In addition to a very low environmental impact, the boiler features an advanced and easy-to-use user interface with adjustment knobs, selection buttons and LCD display for viewing operating temperatures, operating status and error codes. HIGH HYDRAULIC PERFORMANCE The condensing module has been designed to have large water passages which allow interesting flow rate and head performance even on old heating systems. This also means a low risk of clogging in the presence of impurities in the system water. It is made of a special Aluminium-Silicon-Magnesium alloy, a material which – together with the high thicknesses used – is particularly resistant to corrosion. The water circuit runs through the exchanger in an ascending manner, in counter-current with respect to the flame. The dense pinning allows you to increase the exchange surface ensuring excellent water yield. It is important to keep the pH of the heating system filling water between 6.5 and 8.5 with a hardness of 15°F (ref. UNI 8065 - DI 26/06/15). CLASS A CIRCULATOR The low-consumption modulating circulator guarantees considerable savings in electricity compared to a traditional circulator, it can be set in Auto or Fixed operating modes. WIDE MODULATION RANGE The electronic card reduces operating costs thanks to particularly high yields even with low energy absorption, as occurs for example in the mid-seasons. In fact, the wide range of modulation of the appliance (from 15% to 100% of the thermal power) determines high seasonal yields. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W) EVOLVED DESIGN The VICTRIX TT ErP range is designed to make the work of professionals easier. Immergas has invested significant resources for the industrialization of the parts of the appliance, making it particularly robust and has paid the utmost attention to details and finishes. VICTRIX TT ErP presents new technical features such as: • safety valve drain conveyed to the condensate drain • removable cover for direct access to the electrical connection compartment • cover casing for the water connections to better position the boiler in domestic spaces DIRECT ACCESSIBILITY TO THE ELECTRICAL CONNECTIONS COMPARTMENT In the lower part of the boiler there is a connection compartment accessible without the need to open the product but simply by removing the aesthetic cover, to house the electrical connections of the main devices that can be combined (for example CARV2, external probe, CRONO 7). ELECTRONIC AIR/GAS CONTROL The electronic gas valve allows air/gas control by means of a multifunction electrode placed inside the combustion chamber; the car electronic card adapts the combustion parameters in the event of variations in the density of the air or of the fuel. This allows VICTRIX TT ErP to be powered with any type of fuel (methane/LPG or propane air), by intervening only on the electronic board software even at a later time (for example at the first commissioning by the Authorized Assistance Centre). The boiler is therefore supplied with a single product code. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase and provides only for the supply of spare parts.

Read more less

IMMERGAS VICTRIX EXA 28 KW CONDENSING ERP COMPLETE WITH FUME EXHAUST KIT Technical features Immergas Victrix Exa 28 kW boiler Capacity: 28Kw Useful heating power kW: 28, DHW useful power kW: 32.0 Type: Instant Modulation range: 25 - 100% Hot water production (∆t 30 °C) l/min: 15.3 Electrical protection degree IPX: 5D Dimensions (HxWxD) mm: 763 x 440 x 300 ; 42kg VICTRIX EXA With VICTRIX EXA comes a generation of condensing boilers that offers all the advantages of condensation in maximum simplicity and economy. Designed to comply with the new European Directives ErP and ELD, it makes it easier to reach the high efficiency classes in space heating and in the production of domestic hot water in homes. The condensing module is in stainless steel and the circulator is low consumption. The modulation range of the appliance goes from 23 to 100% of the thermal power. The user interface is simple to use, it is equipped with adjustment knobs, selection buttons and an LCD display which shows the operating status and any error codes. VICTRIX EXA can also be managed from smartphones, tablets and laptops (the DOMINUS App will be available from January 2016). The casing covering the water connections is standard, to better set up the boiler inside domestic spaces. Approved to operate indoors or outdoors in a partially protected place thanks to the IPX5D degree of electrical protection, the boiler is equipped with standard frost protection down to -5 °C. VICTRIX EXA can also be used in GAUDIUM SOLAR BASE ErP systems. With low emissions of carbon monoxide (CO) and nitrogen oxides (NOX), VICTRIX EXA falls into class 5, the most ecological envisaged by European standards (UNI 297 and 483). The VICTRIX EXA range offers all the advantages of condensation in maximum simplicity and economy. The most compatible technology with the new European Directives and with the aim of reducing energy consumption, is presented in the most economical and effective way for many new installations and replacements of existing appliances. The VICTRIX EXA are two instantaneous boilers of 24 and 28 kW, capable of making a consistent contribution to raising the energy efficiency class in space heating and in the production of domestic hot water. Wall installation is easy both indoors and outdoors and the VICTRIX EXA range also offers the possibility of operating with propane air by choosing the dedicated conversion kit. The condensing module is in stainless steel and the circulator is low consumption, all made more comfortable and easy to install thanks to the compact dimensions. The user interface is simple to use, it features adjustment knobs, selection buttons and an LCD display which shows the operating status and any error codes. The lower casing to cover the connection pipes is standard, while the connection group is optional for all models SIMPLICITY OF CONTROLS The boiler also features an advanced and easy-to-use user interface with LCD display, selection buttons and adjustment knobs. The latter allow you to make temperature adjustments quickly and easily. ECOLOGICAL BOILER VICTRIX EXA has low emissions of carbon monoxide (CO) and nitrogen oxides (NOx) such as to be included in class 5, the most ecological in the classification established by the European standards UNI EN 297 and UNI EN 483. They can therefore discharge through the wall in the cases provided for by Legislative Decree 102 of 4 July 2014. CLASS A CIRCULATOR The low-consumption circulator allows considerable savings in electricity compared to a traditional circulator and adjusts its consumption according to the variations in the hydraulic flow rate of the system, for example in the presence of thermostatic valves or zone valves. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W)   IMMERGAS IS READY TO DO ITS PART FOR THE ENVIRONMENT! It is a very important directive established by the European Union and at the same time a decisive road that will lead all of Europe to reduce pollution and improve citizens' lives. The ErP directive (2009/125/EC) - the acronym stands for "Energy Related Products" - in fact sets very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements for energy and environmental performance for instruments that consume energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central purposes of the legislation: INCREASE THE ENERGY EFFICIENCY OF ENERGY USING MACHINES BY 20% REDUCE EMISSIONS OF CARBON DIOXIDE (CO2 ) INTO THE ATMOSPHERE BY 20% REACH A PERCENTAGE OF RENEWABLE ENERGY ON THE FINAL CONSUMPTION OF 20% Two dates in particular have been established to dictate the timing of the adjustment. From 1 AUGUST 2015 it is mandatory to place appliances equipped with low-consumption circulators on the market. From 26 SEPTEMBER 2015 the ErP and ELD Directives officially come into force with the obligation to place appliances with an energy label on the market. Placing on the market means the first billing by Immergas to the retailer. If the appliance was placed on the market before 1 August/26 September 2015, it can be sold, installed and put into service without time limits. The ErP and ELD provisions are not retroactive ELD DIRECTIVE: EVERYTHING CLEAR ON THE LABEL The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The Labeling Directive (2010/30/EC) in fact requires that each item subject to the ErP Directive be equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power . IMMERGAS PARTICIPATES IN THESE ADJUSTMENTS WITH PARTICULAR CONVICTION, AWARE THAT ONLY A MARKET THAT ENCOURAGES HIGHER ENERGY EFFICIENCY TECHNOLOGIES CAN BE RESPECTFUL FOR THE ENVIRONMENT. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase and provides only for the supply of spare parts.

Read more less

IMMERGAS VICTRIX 35 TT INTERNAL/EXTERNAL CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Immergas Victrix 35 TT condensing boiler Capacity: 32Kw Useful heating power kW: 32.0 DHW useful power kW: 34.2 Type: snapshot Modulation range: 12 - 100% Hot water production (∆t 30 °C) l/min: 16 , 3 Electrical protection degree IPX: 5D Dimensions (HxWxD): 748x440x255 mm Weight: 33Kg VICTRIX kW TT With VICTRIX kW TT, a generation of boilers is born, destined to offer a great variety of solutions thanks also to the extreme dimensional compactness in just 25 centimeters deep. Designed to comply with the new European Directives ErP and ELD, it makes it easier to reach the high efficiency classes in space heating and in the production of domestic hot water in homes. Approved to operate indoors and outdoors, even in the open by means of a special optional cover kit. The IPX5D degree of electrical protection and the boiler is equipped with standard antifreeze protection down to -5 °C. Electricity saving thanks to the low consumption, class A, modulating circulator. The innovative condensing module guarantees high flow rate and head on the heating circuit, low risk of clogging due to any impurities in the system and greater resistance to corrosion thanks to the special alloy with which it is made. The modulating circulator has low consumption and the wide modulation range of the appliance from 12 to 100% of the thermal power allows high seasonal yields with a consequent reduction in gas consumption. The new electronic board allows precise control of combustion regardless of the gas used (methane/LPG or propane air) and, via a simple app, allows the management of VICTRIX kW TT also from smartphones, tablets and laptops (starting from January 2016 VICTRIX kW TT can be installed recessed with OMNI CONTAINER frame but also in SOLAR CONTAINER or DOMUS CONTAINER to create GAUDIUM SOLAR ErP or TRIO ErP systems. The built-in installation allows the boiler to be positioned outside in a niche and therefore to recover living space. With VICTRIX kW TT Immergas takes the installation flexibility of condensing boilers even further and offers a great variety of solutions also thanks to the extreme dimensional compactness in just 25 centimeters deep. All boilers can be installed: inside of; built-in with OMNI CONTAINER but also in SOLAR CONTAINER or DOMUS CONTAINER to add products that use solar thermal and heat pumps to the boiler in GAUDIUM SOLAR ErP or TRIO ErP applications outdoors in partially protected places; and today also in the open air with the dedicated cover kit. Thus the possibilities of creating systems that comply with the new European Directives increasingly oriented towards condensing technology to reduce pollution and increase energy savings increase. The eco-friendly VICTRIX kW TT condensing range expresses the best of Immergas technology, offering great performance thanks to the innovations introduced in the product design. Characteristics HIGH HYDRAULIC PERFORMANCE Primary condensing exchanger, made of an Aluminium-Silicon-Magnesium alloy, particularly resistant to corrosion. Designed to have high flow rate and head performance even on old heating systems thanks to the large water passages. This also means a low risk of clogging in the presence of impurities in the system water. It is important to keep the pH of the heating system filling water between 6.5 and 8.5 with a hardness of 15°F (ref. UNI 8065 - DI 26/06/15) WIDE MODULATION RANGE The electronic card reduces running costs thanks to particularly high yields even with low energy absorption, as occurs for example in mid-seasons. In fact, the wide modulation range (from 12% to 100% of the thermal power) guarantees high seasonal yields DESIGNED FOR PROFESSIONALS VICTRIX kW TT, produced on the new highly automated lines in the historic Immergas headquarters in Brescello, is a specific range of products developed on the "Top Tech" platform. It has particular technical solutions designed to facilitate the work of professionals such as: • safety valve discharge conveyed into the condensate discharge; • cover casing for the water connections, to better position the boiler in domestic spaces; • direct access to the electrical connection compartment of the main external devices (for example CARV2, external probe, CRONO 7) by simply removing the front aesthetic cover without having to open the product. REDUCTION OF ELECTRIC CONSUMPTION Electricity saving thanks to the low consumption, class A, modulating circulator. The circulator can be set in the operating modes: constant ∆t, proportional head or constant speed. The presence of two NTC probes on the system flow and return allows constant modulation of the boiler operating conditions based on the requests of the heating system with a consequent increase in seasonal efficiency. The electrical consumption of the boiler in stand by is less than 6 W. It is a very important directive established by the European Union and at the same time a decisive road that will lead all of Europe to reduce pollution and improve citizens' lives. The ErP directive (2009/125/CE) - the acronym stands for "Energy Related Products" - in fact sets very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements for energy and environmental performance for tools that consume energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central purposes of the legislation: INCREASE THE ENERGY EFFICIENCY OF ENERGY USING MACHINES BY 20% REDUCE EMISSIONS OF CARBON DIOXIDE (CO2 ) INTO THE ATMOSPHERE BY 20% REACH A PERCENTAGE OF RENEWABLE ENERGY ON THE FINAL CONSUMPTION OF 20% Two dates in particular have been established to dictate the timing of the adjustment. From 1 AUGUST 2015 it is mandatory to place appliances equipped with low-consumption circulators on the market. From 26 SEPTEMBER 2015 the ErP and ELD Directives officially come into force with the obligation to place appliances with an energy label on the market. Placing on the market means the first billing by Immergas to the retailer. If the appliance was placed on the market before 1 August/26 September 2015, it can be sold, installed and put into service without time limits. The ErP and ELD provisions are not retroactive ELD DIRECTIVE: EVERYTHING CLEAR ON THE LABEL The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The Labeling Directive (2010/30/EC) in fact requires that each item subject to the ErP Directive be equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power . IMMERGAS PARTICIPATES IN THESE ADJUSTMENTS WITH PARTICULAR CONVICTION, AWARE THAT ONLY A MARKET THAT ENCOURAGES HIGHER ENERGY EFFICIENCY TECHNOLOGIES CAN BE RESPECTFUL FOR THE ENVIRONMENT. Product Guarantee The warranty on this item is 24 months from the date of purchase.  

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT THE IMMERGAS AREA ASSISTANCE IN ADVANCE IMMERGAS VICTRIX 35 TT INTERNAL/EXTERNAL CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Immergas Victrix 35 TT condensing boiler Capacity: 32Kw Useful heating power kW: 32.0 DHW useful power kW: 34.2 Type: snapshot Modulation range: 12 - 100% Hot water production (∆t 30 °C) l/min: 16 , 3 Electrical protection degree IPX: 5D Dimensions (HxWxD): 748x440x255 mm Weight: 33Kg VICTRIX kW TT With VICTRIX kW TT, a generation of boilers is born, destined to offer a great variety of solutions thanks also to the extreme dimensional compactness in just 25 centimeters deep. Designed to comply with the new European Directives ErP and ELD, it makes it easier to reach the high efficiency classes in space heating and in the production of domestic hot water in homes. Approved to operate indoors and outdoors, even in the open by means of a special optional cover kit. The IPX5D degree of electrical protection and the boiler is equipped with standard antifreeze protection down to -5 °C. Electricity saving thanks to the low consumption, class A, modulating circulator. The innovative condensing module guarantees high flow rate and head on the heating circuit, low risk of clogging due to any impurities in the system and greater resistance to corrosion thanks to the special alloy with which it is made. The modulating circulator has low consumption and the wide modulation range of the appliance from 12 to 100% of the thermal power allows high seasonal yields with a consequent reduction in gas consumption. The new electronic board allows precise control of combustion regardless of the gas used (methane/LPG or propane air) and, via a simple app, allows the management of VICTRIX kW TT also from smartphones, tablets and laptops (starting from January 2016 VICTRIX kW TT can be installed recessed with OMNI CONTAINER frame but also in SOLAR CONTAINER or DOMUS CONTAINER to create GAUDIUM SOLAR ErP or TRIO ErP systems. The built-in installation allows the boiler to be positioned outside in a niche and therefore to recover living space. With VICTRIX kW TT Immergas takes the installation flexibility of condensing boilers even further and offers a great variety of solutions also thanks to the extreme dimensional compactness in just 25 centimeters deep. All boilers can be installed: inside of; built-in with OMNI CONTAINER but also in SOLAR CONTAINER or DOMUS CONTAINER to add products that use solar thermal and heat pumps to the boiler in GAUDIUM SOLAR ErP or TRIO ErP applications outdoors in partially protected places; and today also in the open air with the dedicated cover kit. Thus the possibilities of creating systems that comply with the new European Directives increasingly oriented towards condensing technology to reduce pollution and increase energy savings increase. The eco-friendly VICTRIX kW TT condensing range expresses the best of Immergas technology, offering great performance thanks to the innovations introduced in the product design. Characteristics HIGH HYDRAULIC PERFORMANCE Primary condensing exchanger, made of an Aluminium-Silicon-Magnesium alloy, particularly resistant to corrosion. Designed to have high flow rate and head performance even on old heating systems thanks to the large water passages. This also means a low risk of clogging in the presence of impurities in the system water. It is important to keep the pH of the heating system filling water between 6.5 and 8.5 with a hardness of 15°F (ref. UNI 8065 - DI 26/06/15) WIDE MODULATION RANGE The electronic card reduces running costs thanks to particularly high yields even with low energy absorption, as occurs for example in mid-seasons. In fact, the wide modulation range (from 12% to 100% of the thermal power) guarantees high seasonal yields DESIGNED FOR PROFESSIONALS VICTRIX kW TT, produced on the new highly automated lines in the historic Immergas headquarters in Brescello, is a specific range of products developed on the "Top Tech" platform. It has particular technical devices designed to facilitate the work of professionals such as: • safety valve discharge conveyed into the condensate discharge; • cover casing for the water connections, to better position the boiler in domestic spaces; • direct access to the electrical connection compartment of the main external devices (for example CARV2, external probe, CRONO 7) by simply removing the front aesthetic cover without having to open the product. REDUCTION OF ELECTRIC CONSUMPTION Electricity saving thanks to the low consumption modulating circulator, in class A. The circulator can be set in the operating modes: constant ∆t, proportional head or constant speed. The presence of two NTC probes on the system flow and return allows constant modulation of the boiler operating conditions based on the requests of the heating system with a consequent increase in seasonal efficiency. The electrical consumption of the boiler in stand by is less than 6 W. It is a very important directive established by the European Union and at the same time a decisive road that will lead all of Europe to reduce pollution and improve citizens' lives. The ErP directive (2009/125/CE) - the acronym stands for "Energy Related Products" - in fact sets very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements for energy and environmental performance for tools that consume energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central purposes of the legislation: INCREASE THE ENERGY EFFICIENCY OF ENERGY USING MACHINES BY 20% REDUCE EMISSIONS OF CARBON DIOXIDE (CO2 ) INTO THE ATMOSPHERE BY 20% REACH A PERCENTAGE OF RENEWABLE ENERGY ON THE FINAL CONSUMPTION OF 20% Two dates in particular have been established to dictate the timing of the adjustment. From 1 AUGUST 2015 it is mandatory to place appliances equipped with low-consumption circulators on the market. From 26 SEPTEMBER 2015 the ErP and ELD Directives officially come into force with the obligation to place appliances with an energy label on the market. Placing on the market means the first billing by Immergas to the retailer. If the appliance was placed on the market before 1 August/26 September 2015, it can be sold, installed and put into service without time limits. The ErP and ELD provisions are not retroactive ELD DIRECTIVE: EVERYTHING CLEAR ON THE LABEL The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The Labeling Directive (2010/30/EC) in fact requires that each item subject to the ErP Directive be equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power . IMMERGAS PARTICIPATES IN THESE ADJUSTMENTS WITH PARTICULAR CONVICTION, AWARE THAT ONLY A MARKET THAT ENCOURAGES HIGHER ENERGY EFFICIENCY TECHNOLOGIES CAN BE RESPECTFUL FOR THE ENVIRONMENT. Product Guarantee The warranty on this item is 24 months from the date of purchase.  

Read more less

AVAILABLE TO ORDER IMMERGAS VICTRIX SUPERIOR 32 KW CONDENSING COMPLETE WITH KIT FOR METHANE FUME EXHAUST - NEW ERP Technical features Product code: 3.025503 Type: INSTANT condensing boiler Energy efficiency Class A heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile: XL Rated useful power: 32 kW Hot water production (∆t 30 °C) l/min: 15.3 Nominal / (real) system expansion tank capacity liters 8.0 / (5.8) System expansion vessel pre-charge pressure bar 1.0 Head available with flow rate 1000 l/h kPa (m wc) 31.0 (3.16) Useful thermal power for hot water production kW (kcal/h) 32.0 (27,520) DHW adjustable temperature °C 30 - 60 DHW circuit minimum dynamic pressure bar 0.3 DHW circuit max pressure bar 10 Min. domestic hot water withdrawal 1.5 litres/min Characteristics Power supply V/Hz 230 - 50 Nominal absorption A 0.78 Power absorbed in stand-by W 5.5 Electrical insulation degree IP X5D Dimensions Dimensions (HxWxD): 835 x 440 x 350 VICTRIX SUPERIOR Low consumption: the modulating circulator automatically adapts operation to the conditions of use and reduces electricity consumption. Maximum domestic comfort: the 2-litre micro-accumulator speeds up hot water delivery and reduces waiting times compared to other instantaneous boilers. High seasonal yields: the wide modulation range of the boiler allows high seasonal yields with a consequent reduction in gas consumption. Display: large, backlit liquid crystal, provides the main operating information. Thermoregulators: optional. They improve comfort and increase energy savings. Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 5 (European Standards UNI 297 and 483): the best for reduced emissions of nitrogen oxides (NOX). Renewable energy: can be combined with solar systems. High flexibility: approved to operate indoors and outdoors in partially protected places. IPX5D electrical protection. Standard antifreeze up to -3 °C. OTHER CHARACTERISTICS: HIGH HYDRAULIC PERFORMANCE With the low energy consumption modulating circulator and the possibility of setting the ∆t on the system, these boilers are ideal on systems equipped with zone and thermostatic valves, to enhance the condensing operation of the appliance, reducing consumption energetic. HIGH EFFICIENCY IN ALL SEASONS Even in mid-season, when energy absorption is limited, efficiency is still high and running costs are reduced thanks to the modulation range from 12.5% ​​to 100% of the power. TECHNOLOGY AND SIMPLICITY OF USE The large and functional backlit liquid crystal display allows easy reading of all the main information relating to operation. Two practical knobs allow you to control the device. § INSTALLATION FLEXIBILITY With 19 cm of space between the water connections and the wall, it can be easily installed in any replacement; moreover, the boilers are designed for internal or external installation in partially protected places. The standard antifreeze protection is down to -3 °C and can be extended, with a suitable optional kit, down to -15 °C. Warranty The guarantee on this article is 24 months from the date of purchase.

Read more less

OFFER VALID UNTIL STOCKS LAST Technical features Model : AUDAX 18 Code 3.025563 Energy efficiency COP 4.40 EER 4.35 Energy efficiency class: A+ / A+ Performance Useful heating power: 17.14 kW Useful cooling power: 19.83 kW Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R410A Dimensions and weight Dimensions (HxWxD): 1579x1109x584 Weight : 199.0 Kg Immergas AUDAX inverter air-water heat pump The large range of Immergas heat pumps is designed to create integrated or hybrid systems that use renewable energies to offer great comfort, reduce consumption and harmful emissions, comply with the new standards. With the addition of photovoltaic panels, especially useful for heat pump only systems, even greater advantages are obtained. For this reason, all Immergas products are equipped with a photovoltaic contact and make the most of the sun's energy in heating and cooling (with split and monobloc versions) and in water heaters that only produce domestic hot water. AUDAX is the name of the air/water monobloc versions indicated for all system solutions: 4 are the single-phase versions, for homes, of 6, 8, 12 and 16, and 3 are the three-phase versions, for commercial environments and offices, of 16, 18 and 21 kW. Low consumption: thanks to inverter technology , electricity consumption decreases and performance remains high in favor of greater domestic comfort. Storage tank: in combination with a separate storage unit it can produce domestic hot water. Silent operation: low sound impact thanks to special technical solutions. Standard control panel: allows management of the heat pump from any room in the home. High seasonal yields: ideal for air conditioning environments both in winter heating (maximum temperature 60 °C) and in summer cooling (in combination with fan coils or radiant panels combined with dehumidifier). Formula Comfort HYBRID: makes use of the most complete maintenance program which allows the conventional guarantee to be extended to 5 years which, in collaboration with the Immergas Authorized Assistance Centre, can be activated during the initial check. Eco-friendly technology: uses the outside air as a source of renewable energy. Renewable energies: combinable with hybrid and integrated systems for systems of great domestic comfort , it satisfies the new regulatory requirements. Versatile: it can work individually, in combination with integrated systems with boiler or in series for solutions in centralized systems. Positioning: Approved for outdoor, open-air operation. IPX4 electrical protection. Simple user interface The control panel, supplied as standard, in addition to displaying the operating diagnostics, also acts as a weekly thermostat for heating/cooling management with room temperature/humidity sensor function in stand-alone applications. Easy to connect, two BUS-type cables are sufficient which allow the exchange of information and two cables for the power supply to be connected to the AUDAX and, therefore, it does not require power batteries. The control panel allows you to: Program comfort/economy room temperature Set time slots and climatic curve in both heating and cooling View heat pump error codes Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! THE PRODUCT IS AVAILABLE ON ORDER AND WILL BE SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M30-T Product code : 3.032384 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A++ Energy class in heating at 55° C: A+ Heating COP with water set at 35 °C: 3.91 Heating COP with water set at 45 °C: 2.90 Heating COP with water set at 55 °C: 2.30 EER cooling with water set at 7 °C : 2.55 EER cooling with water set at 18 °C: 4.00 Performance   Heating Useful power in heating with water set at 35° C: 3.10 kW Useful power in heating with water set at 45° C: 30.00 kW Useful power in heating with water set at 55° C: 30.00 kW Heating temperature range : 5° ~ 60° C Cooling down Useful power in cooling with water set at 7 °C: 29.50 kW Useful power in cooling with water set at 18 °C: 31.00 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 5 ~ 60°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 14500 W System expansion tank: 8 litres Rated Operating Current: 22.8A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 46° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1129x1558x528 mm Weight : 177Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! THE PRODUCT IS AVAILABLE ON ORDER AND WILL BE SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M26-T Product code : 3.032383 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A+ Heating COP with water set at 35 °C: 4.08 Heating COP with water set at 45 °C: 3.10 Heating COP with water set at 55 °C: 2.45 EER cooling with water set at 7 °C : 2.70 EER cooling with water set at 18 °C: 4.30 Performance   Heating Useful power in heating with water set at 35° C: 26.00 kW Useful power in heating with water set at 45° C: 26.00 kW Useful power in heating with water set at 55° C: 26.00 kW Heating temperature range : 5° ~ 60° C Cooling down Useful power in cooling with water set at 7 °C: 26.00 kW Useful power in cooling with water set at 18 °C: 27.00 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 5 ~ 60°C Technical data Hydronic circuit maximum working pressure: 3 bar Maximum absorbed power: 13800 W System expansion tank: 8 litres Rated Operating Current: 21.6A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 46° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1129x1558x528 mm Weight : 177Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent rules on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The IMMERGAS range of heat pumps is designed to provide great comfort by creating electrical systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! THE PRODUCT IS AVAILABLE ON ORDER AND WILL BE SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M22-T Product code : 3.032382 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35 °C: 4.40 Heating COP with water set at 45 °C: 3.40 Heating COP with water set at 55 °C: 2.65 EER cooling with water set at 7 °C : 2.95 EER cooling with water set at 18 °C: 4.60 Performance   Heating Useful power in heating with water set at 35° C: 22.00 kW Useful power in heating with water set at 45° C: 22.00 kW Useful power in heating with water set at 55° C: 22.00 kW Heating temperature range : 5° ~ 60° C Cooling down Useful power in cooling with water set at 7 °C: 21.00 kW Useful power in cooling with water set at 18 °C: 23.00 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 5 ~ 60°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 12500 W System expansion tank: 8 litres Rated Operating Current: 19.6A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 46° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1129x1558x528 mm Weight : 177Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! THE PRODUCT IS AVAILABLE ON ORDER AND WILL BE SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M18-T Product code : 3.032381 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35 °C: 4.70 Heating COP with water set at 45 °C: 3.50 Heating COP with water set at 55 °C: 2.75 EER cooling with water set at 7 °C : 3.05 EER cooling with water set at 18 °C : 4.75 Performance   Heating Useful power in heating with water set at 35° C: 18.00 kW Useful power in heating with water set at 45° C: 18.00 kW Useful power in heating with water set at 55° C: 18.00 kW Heating temperature range : 5° ~ 60° C Cooling down Useful power in cooling with water set at 7 °C: 17.00 kW Useful power in cooling with water set at 18 °C: 18.50 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 5 ~ 60°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 10600 W System expansion tank: 8 litres Rated Operating Current: 16.8A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 46° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1129x1558x528 mm Weight : 177Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! THE PRODUCT IS AVAILABLE ON ORDER AND WILL BE SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M14-T Product code : 3.032379 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35 °C: 4.60 Heating COP with water set at 45 °C: 3.60 Heating COP with water set at 55 °C: 2.95 EER cooling with water set at 7 °C : 2.50 EER cooling with water set at 18 °C: 3.61 Performance   Heating Useful power in heating with water set at 35° C: 14.50 kW Useful power in heating with water set at 45° C: 14.10 kW Useful power in heating with water set at 55° C: 13.80 kW Heating temperature range : 12° ~ 65° C Cooling down Useful power in cooling with water set at 7 °C: 12.40 kW Useful power in cooling with water set at 18 °C: 13.50 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 12 ~ 65°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 5800 W System expansion tank: 8 litres Rated Operating Current: 11A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 43° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1385x865x526 mm Weight : 144Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less