OFFER VALID UNTIL STOCKS LAST Technical features Model : AUDAX 18 Code 3.025563 Energy efficiency COP 4.40 EER 4.35 Energy efficiency class: A+ / A+ Performance Useful heating power: 17.14 kW Useful cooling power: 19.83 kW Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R410A Dimensions and weight Dimensions (HxWxD): 1579x1109x584 Weight : 199.0 Kg Immergas AUDAX inverter air-water heat pump The large range of Immergas heat pumps is designed to create integrated or hybrid systems that use renewable energies to offer great comfort, reduce consumption and harmful emissions, comply with the new standards. With the addition of photovoltaic panels, especially useful for heat pump only systems, even greater advantages are obtained. For this reason, all Immergas products are equipped with a photovoltaic contact and make the most of the sun's energy in heating and cooling (with split and monobloc versions) and in water heaters that only produce domestic hot water. AUDAX is the name of the air/water monobloc versions indicated for all system solutions: 4 are the single-phase versions, for homes, of 6, 8, 12 and 16, and 3 are the three-phase versions, for commercial environments and offices, of 16, 18 and 21 kW. Low consumption: thanks to inverter technology , electricity consumption decreases and performance remains high in favor of greater domestic comfort. Storage tank: in combination with a separate storage unit it can produce domestic hot water. Silent operation: low sound impact thanks to special technical solutions. Standard control panel: allows management of the heat pump from any room in the home. High seasonal yields: ideal for air conditioning environments both in winter heating (maximum temperature 60 °C) and in summer cooling (in combination with fan coils or radiant panels combined with dehumidifier). Formula Comfort HYBRID: makes use of the most complete maintenance program which allows the conventional guarantee to be extended to 5 years which, in collaboration with the Immergas Authorized Assistance Centre, can be activated during the initial check. Eco-friendly technology: uses the outside air as a source of renewable energy. Renewable energies: combinable with hybrid and integrated systems for systems of great domestic comfort , it satisfies the new regulatory requirements. Versatile: it can work individually, in combination with integrated systems with boiler or in series for solutions in centralized systems. Positioning: Approved for outdoor, open-air operation. IPX4 electrical protection. Simple user interface The control panel, supplied as standard, in addition to displaying the operating diagnostics, also acts as a weekly thermostat for heating/cooling management with room temperature/humidity sensor function in stand-alone applications. Easy to connect, two BUS-type cables are sufficient which allow the exchange of information and two cables for the power supply to be connected to the AUDAX and, therefore, it does not require power batteries. The control panel allows you to: Program comfort/economy room temperature Set time slots and climatic curve in both heating and cooling View heat pump error codes Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! THE PRODUCT IS AVAILABLE ON ORDER AND WILL BE SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M30-T Product code : 3.032384 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A++ Energy class in heating at 55° C: A+ Heating COP with water set at 35 °C: 3.91 Heating COP with water set at 45 °C: 2.90 Heating COP with water set at 55 °C: 2.30 EER cooling with water set at 7 °C : 2.55 EER cooling with water set at 18 °C: 4.00 Performance   Heating Useful power in heating with water set at 35° C: 3.10 kW Useful power in heating with water set at 45° C: 30.00 kW Useful power in heating with water set at 55° C: 30.00 kW Heating temperature range : 5° ~ 60° C Cooling down Useful power in cooling with water set at 7 °C: 29.50 kW Useful power in cooling with water set at 18 °C: 31.00 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 5 ~ 60°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 14500 W System expansion tank: 8 litres Rated Operating Current: 22.8A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 46° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1129x1558x528 mm Weight : 177Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! THE PRODUCT IS AVAILABLE ON ORDER AND WILL BE SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M26-T Product code : 3.032383 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A+ Heating COP with water set at 35 °C: 4.08 Heating COP with water set at 45 °C: 3.10 Heating COP with water set at 55 °C: 2.45 EER cooling with water set at 7 °C : 2.70 EER cooling with water set at 18 °C: 4.30 Performance   Heating Useful power in heating with water set at 35° C: 26.00 kW Useful power in heating with water set at 45° C: 26.00 kW Useful power in heating with water set at 55° C: 26.00 kW Heating temperature range : 5° ~ 60° C Cooling down Useful power in cooling with water set at 7 °C: 26.00 kW Useful power in cooling with water set at 18 °C: 27.00 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 5 ~ 60°C Technical data Hydronic circuit maximum working pressure: 3 bar Maximum absorbed power: 13800 W System expansion tank: 8 litres Rated Operating Current: 21.6A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 46° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1129x1558x528 mm Weight : 177Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent rules on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The IMMERGAS range of heat pumps is designed to provide great comfort by creating electrical systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! THE PRODUCT IS AVAILABLE ON ORDER AND WILL BE SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M22-T Product code : 3.032382 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35 °C: 4.40 Heating COP with water set at 45 °C: 3.40 Heating COP with water set at 55 °C: 2.65 EER cooling with water set at 7 °C : 2.95 EER cooling with water set at 18 °C: 4.60 Performance   Heating Useful power in heating with water set at 35° C: 22.00 kW Useful power in heating with water set at 45° C: 22.00 kW Useful power in heating with water set at 55° C: 22.00 kW Heating temperature range : 5° ~ 60° C Cooling down Useful power in cooling with water set at 7 °C: 21.00 kW Useful power in cooling with water set at 18 °C: 23.00 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 5 ~ 60°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 12500 W System expansion tank: 8 litres Rated Operating Current: 19.6A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 46° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1129x1558x528 mm Weight : 177Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! THE PRODUCT IS AVAILABLE ON ORDER AND WILL BE SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M18-T Product code : 3.032381 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35 °C: 4.70 Heating COP with water set at 45 °C: 3.50 Heating COP with water set at 55 °C: 2.75 EER cooling with water set at 7 °C : 3.05 EER cooling with water set at 18 °C : 4.75 Performance   Heating Useful power in heating with water set at 35° C: 18.00 kW Useful power in heating with water set at 45° C: 18.00 kW Useful power in heating with water set at 55° C: 18.00 kW Heating temperature range : 5° ~ 60° C Cooling down Useful power in cooling with water set at 7 °C: 17.00 kW Useful power in cooling with water set at 18 °C: 18.50 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 5 ~ 60°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 10600 W System expansion tank: 8 litres Rated Operating Current: 16.8A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 46° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1129x1558x528 mm Weight : 177Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! THE PRODUCT IS AVAILABLE ON ORDER AND WILL BE SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M14-T Product code : 3.032379 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35 °C: 4.60 Heating COP with water set at 45 °C: 3.60 Heating COP with water set at 55 °C: 2.95 EER cooling with water set at 7 °C : 2.50 EER cooling with water set at 18 °C: 3.61 Performance   Heating Useful power in heating with water set at 35° C: 14.50 kW Useful power in heating with water set at 45° C: 14.10 kW Useful power in heating with water set at 55° C: 13.80 kW Heating temperature range : 12° ~ 65° C Cooling down Useful power in cooling with water set at 7 °C: 12.40 kW Useful power in cooling with water set at 18 °C: 13.50 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 12 ~ 65°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 5800 W System expansion tank: 8 litres Rated Operating Current: 11A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 43° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1385x865x526 mm Weight : 144Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! THE PRODUCT IS AVAILABLE ON ORDER AND WILL BE SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M16-T Product code : 3.032380 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35 °C: 4.50 Heating COP with water set at 45 °C: 3.50 Heating COP with water set at 55 °C: 2.85 EER cooling with water set at 7 °C : 2.50 EER cooling with water set at 18 °C: 3.61 Performance   Heating Useful power in heating with water set at 35° C: 15.90 kW Useful power in heating with water set at 45° C: 16.00 kW Useful power in heating with water set at 55° C: 16.00 kW Heating temperature range : 12° ~ 65° C Cooling down Useful power in cooling with water set at 7 °C: 14.00 kW Useful power in cooling with water set at 18 °C: 14.20 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 12 ~ 65°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 6200 W System expansion tank: 8 litres Rated Operating Current: 12A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 43° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1385x865x526 mm Weight : 144Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M12-T Product code : 3.032378 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35 °C: 4.95 Heating COP with water set at 45 °C: 3.70 Heating COP with water set at 55 °C: 3.05 EER cooling with water set at 7 °C : 2.75 EER cooling with water set at 18 °C : 3.95 Performance   Heating Useful power in heating with water set at 35° C: 11.70 kW Useful power in heating with water set at 45° C: 12.30 kW Useful power in heating with water set at 55° C: 11.90 kW Heating temperature range : 12° ~ 65° C Cooling down Useful power in cooling with water set at 7 °C: 11.50 kW Useful power in cooling with water set at 18 °C: 12.00 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 12 ~ 65°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 5500 W System expansion tank: 8 litres Rated Operating Current: 10A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 43° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1385x865x526 mm Weight : 144Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 appliances with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less