Technical features Model : AquaThermica Compact 100 Product code : 305766 Energy efficiency Energy efficiency class: A++ Load profile : M Annual energy consumption: 429.3 kWh Performance Nominal thermal power A20/W55: 0.93 kW Nominal thermal power A14/W55: 0.79 kW Nominal thermal power A7/W55: 0.67 kW Maximum setting temperature: 60° C Heating time in Boost mode with electric resistance: 2:37 h Maximum volume of mixed water at 40°C: 135 litres Maximum absorbed power: 1.83 kW Electric resistance power: 1.5 kW Tank capacity: 98 litres Nominal air flow rate: 235 m3 /h External sound power level: 58 dB(A) Internal sound power level: 50 dB(A) Maximum operating pressure: 8 bar Degree of protection: IPX4 Corrosion protection: Magnesium anode Ø32x270 mm Electrical data Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant gas: R513A Operating range : - PDC aspirated : 5° ~ 43° C - Installed in environment: 4° ~ 40° C AQUATHERMICA COMPACT OneClima Wall-mounted heat pump water heater for domestic hot water Renewable Energy Energy efficiency class A+ Energy savings up to 75% Low CO2 emissions Electronic valve for better performance Temperature range from -5°C to +43°C 60°C only with PDC Ecological refrigerant gas LED display Product Warranty : The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Model : aroSTOR VWL B 100/5 Product code: 0010026813 Volume: 100 litres Installation : Mural Energy efficiency COP (A7/W52) : 2.6 COP (A14/W55) : 2.66 Performance Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant: R290 Air inlet connection: 125 mm Air outlet connection: 80 mm Protection Class: IPX4 Operating range: -7° to 35°C Domestic hot water temperature: from 30° to 55°C Maximum temperature of domestic hot water pdc + resistance: 65°C Sound power : 45 dB(A) Sound pressure: 36 dB(A) Maximum electrical power absorbed by heat pump + resistance: 1600 W Kettle material: Enamelled steel Insulation type: PU foam Thickness: 50 mm Dimensions and weight Dimensions (HxWxD): 1287x525x543 mm Empty weight: 47.0 Kg Full weight: 147.0 Kg Vaillant aroSTOR heat pump water heater wall mounted The perfect solution for apartments aroSTOR, the new frontier of water heaters: ecological, convenient and silent. Particularly suitable for replacing old electric water heaters or for installation in newly built apartments, aroSTOR heat pump water heaters are ideal for those who choose an electric solution with savings and environmental protection in mind. Eco-friendly water heating for all your needs Whether you are modernising a single-family home or building a new one, with our new aroSTOR heat pump water heater, you can use air as a renewable heat source for an eco-friendly and efficient hot water supply. aroSTOR is available in a 200 and 270 litre floor-standing version or an 80 and 100 litre wall-mounted version. The floor-standing models are equipped with a low-maintenance stainless steel boiler and are suitable for the hot water needs of up to 5 people. Built for tomorrow's climate needs Thanks to the new natural refrigerant R290, choosing aroSTOR is a safe investment, as it is built to meet the most stringent future standards of the European F-gas regulation for climate protection. Enjoy maximum comfort with a clear conscience at all times. Efficient, silent and reliable With the aroSTOR hot water heat pump, you can convert 1 kWh of electrical energy into over 3 kWh of thermal energy for heating water. A glance at the efficiency label confirms this: with its energy efficiency class A+, the aroSTOR stands up to any comparison. The same goes for its quiet operation: with a maximum sound pressure level of 41 db(A) at a distance of one meter, the aroSTOR is quieter than a modern refrigerator and can therefore be installed in your living space without any problems. Perfect combination with photovoltaic energy aroSTOR can be easily combined with a photovoltaic system. This gives you the advantage of being able to use the electricity generated by your system all year round. As soon as the sun provides enough energy, the energy manager of the photovoltaic system activates aroSTOR. The result: with aroSTOR, you not only reduce your CO 2 footprint, but also your energy costs. First ignition free First start-up of the system and free warranty validation with the official Vaillant technical assistance centres. aroSTOR wall installation New natural refrigerant gas R290 Concentric air supply / exhaust accessory Boost function for fast charging Silent operation max 36 dB(A) at 1 meter Kettle guaranteed for 5 years Auxiliary electric resistance 1.2 kW Inlet air temperature range -7°C / +35°C Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Heat Pump Water Heater Immergas RAPAX 100 V2 100 liters 3.028366 Code 3.028366 Storage capacity (litres) 100 Rated power kW 0.96 Dimensions (HxWxD) mm 1209 x 522 x 538 R134A fluid COP T amb. 15°C 2.75 COP T amb. 7°C 2.47 RAPAX extension RAPAX V3 water heaters can completely eliminate the consumption of gas to heat domestic water because they use the same principle as heat pumps. They are one of the new, effective Immergas solutions for making the best use of renewable energy sources. Floor-standing versions are available with 270-litre (RAPAX 300 V3) vitrified steel storage tank, or 200-litre (RAPAX 200 V3) storage tank and a wall-mounted version with 100-litre vitrified steel storage tank (RAPAX 100 V2). RAPAX 300 V3 is particularly suitable for renovating and building heating systems in villas or single houses when it is necessary to cover 50% of domestic hot water consumption with renewable energy sources. RAPAX 100 V2 was created to complete the offer of systems both for new homes, especially condominiums, and for the replacement of existing gas or electric water heaters. The entire range represents an excellent alternative to solar; can be used in systems built to operate without gas for the production of domestic hot water and in combination with a heat pump, for to air condition. All RAPAX V3 water heaters are equipped with specific predispositions to make the most of the photovoltaic system and, in the RAPAX 200/300 SOL V3 versions, the combination with solar thermal systems. REDUCED CONSUMPTION AND RESPECT FOR THE ENVIRONMENT The RAPAX V3 series greatly reduces polluting emissions compared to a traditional gas water heater. Thanks to the heat pump, it uses the heat in the air as a source of renewable and free energy to heat the water with improved COPs. Furthermore, through an electrical predisposition, it can accumulate the excess energy produced with the photovoltaic system in the boiler. The RAPAX 200 and 300 SOL V3 versions can be combined with a forced circulation solar thermal system to further reduce electricity consumption. SILENT OPERATION RAPAX V3 water heaters have a low noise impact making them particularly suitable for installation in inhabited rooms as well. EASY INSTALLATION They can also be installed in unheated rooms such as garages, laundries and closets, and do not require significant masonry work apart from any holes for air ducting in solutions with intake and expulsion of air from the outside. Also supplied, as an option, is a supply kit with DHW expansion tank and safety valve necessary for the installation of this type of appliance. PRACTICAL ADJUSTMENT The RAPAX 100 V2 wall-hung version has a display in the central part of the casing, allowing the installer to place the water heater at the desired height from the ground and providing the user with maximum convenience for setting and viewing the main operating parameters.

Read more less

Water Heater Heat Pump Water Heater Haier M5 100 liters HP110M5 Model M5 monoblock HP110M5 Commercial code 25001027Y Reservoir Wall hanging / Ducted installation Tank volume L 110 Power supply V-Hz 220~240V/50Hz Tank pressure Bar 8 Extra Coil / Exchange Surface No Anti-corrosion Magnesium anode IP protection class IPX4 System data Auxiliary electric resistance power W 1200 Average absorbed power (heat pump only) W 240 Maximum absorbed power (heat pump only) W 350 Maximum absorbed power (with electric resistance) W 1550 Default water temperature °C 55 Water temperature range with resistance °C 35÷75 Water temperature range heat pump only °C 35÷65 Refrigerant / quantity kg R134a / 0.45 Global Warming Potential (GWP) 1430 Sound power dB(A) 50 Operating temperature (heat pump only) min~max °C -7÷45 Operating temperature (system) min~max °C -7÷45 Performance Type of extraction Environment / External COP@7°C (EN16147) 2.71 COP@14°C (EN16147) 3.17 Heating time (@7°C) h 4h58 Heating time (@14°C) h 4h09 Tapping cycle (EN16147) M Power absorbed in standby / Pes (@7°C) W 20 Maximum volume of usable hot water (EN16147) L 102.5 Energy efficiency class (ERP) A+ Dimensions and connections Water outlet " G1/2"M Water inlet / Condensate drain " G1/2"M Safety valve " G1/2"M Ducting hole diameter for air intake/delivery mm Ø 160 Water heater dimensions (LxPxH) mm 492x537x1170 Packing dimensions without pallet (LxPxH) mm 587x587x1247 Net weight kg 51 M5 Haier Monobloc AIR/WATER TREATMENT HEAT PUMP WATER HEATER The Haier heat pump water heater line was born thinking about the energy saving of families. Unlike a traditional water heater, heat pump water heaters provide hot water thanks to the heat present in the air, thus saving on your electricity bill. The electrical energy used by the system is only that necessary for the operation of the compressor and the fan. The electric heaters are inserted only if really necessary or if requested by the user (BOOST mode) Heat pump water heater: how does it work? To understand how a heat pump works, it is sufficient to think of how a refrigerator works: it transfers the heat present inside it to the surrounding environment. The Haier water heater reverses the cycle, extracting heat from the air and transferring it to the water. It is possible to channel the incoming and outgoing air outside to exploit the heat present outside Features Haier heat pump water heater The Haier heat pump water heater is designed to offer the best possible experience and maximum savings thanks to: backward curved fan, reduces noise and energy consumption coil at the bottom of the tank, ensures more hot water anti-legionella function, automatically heats the water to 65°C, every seven days, to destroy any bacteria that may form in the tank load shedding control, allows you to stop the operation of the unit in periods programmed by the user The tank of the Haier heat pump water heater The Haier heat pump water heater tank is built with quality materials and components, which ensure excellent thermal insulation and protect the tank from electrochemical corrosion favored by the water, ensuring its correct operation over the years. The tank is also subjected to impulse tests, to ensure a wide range of operating pressure.

Read more less