ATTENZIONE IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO: VITI NON DI SERIE E MODIFICA AL SUPPORTO DEL BRUCIATORE PANNELLO DI COMANDO GRAFFIATO AMMACCATURE E BOZZATURE SULLA PARTE ANTERIORE BOZZATURE LATERALE DESTRO LEGGERA IRREGOLARITÀ SULLA PARTE POSTERIORE IMBALLO USURATO (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE).   ATTENZIONE  Metano, Gpl, Aria propanata Ready mediante una semplice configurazione la caldaia è in grado di funzionare a metano, gpl ed aria propanata senza l’utilizzo di kit di conversione aggiuntivi. Per info, contattare preventivamente il centro assistenza autorizzato di zona Specifiche etichetta energetica secondo direttiva Europea ErP Efficienza energetica riscaldamento Classe A Efficienza energetica sanitario profilo XL Classe A Caratteristiche esercizio riscaldamento/sanitario: Portata termica (P.C.I.) Max Riscaldamento: 34,0 kW Portata termica (P.C.I.) Max Sanitario: 34,7 kW Potenza termica 80°C-60°C Max Riscaldamento: 30 kW Potenza termica 80°C-60°C Max Sanitario: 34,0 kW Rendimento termico utile 30%: 109,8% Pressione max esercizio riscaldamento bar 3 Capacità vaso di espansione riscaldamento litri 10 Grado protezione (IEC 60529) IP X5D Tensione di alimentazione V/Hz 230V / 50Hz Potenza elettrica assorbita W 88 Dimensioni LxAxP mm 420x700x320 5 anni senza pensieri Caldaia Ferroli BLUEHELIX TECH RRT Caldaie murali a condensazione ecologiche con cella di combustione Ferroli Thermobalance™ L'evoluzione continua.. La gamma di generatori è dotata del collaudato scambiatore in acciaio inox AISI 304. Progettata e costruita secondo le nuove direttive ErP per la progettazione ecocompatibile e labelling, BLUEHELIX TECH RRT si colloca al top della sua categoria. BLUEHELIX TECH RRT raggiunge un’efficienza energetica del riscaldamento d’ambiente tra le più alte della categoria della caldaia: ηs 94%. Inoltre con l’abbinamento alla sonda esterna ed al cronocomando remoto Romeo raggiunge la classe energetica di sistema A+ Garanzia estesa con la formula “5 ANNI SENZA PENSIERI” La qualità di Bluehelix TECH RRT non si discute, e Ferroli è pronta a metterla alla prova offrendo ai propri clienti una copertura di garanzia estesa che assicura anche la manutenzione periodica e le verifiche di Legge Efficienza al TOP anche su vecchi impianti Lo scambiatore del gruppo termico THERMOBALANCE™ di Bluehelix TECH RRT a confronto con il più classico e diffuso scambiatore in acciaio utilizzato in passato anche dal Gruppo Ferroli esclusivamente su una piccola serie di caldaie prodotte per il mercato inglese, e poi subito abbandonato in favore dell’evoluzione verso lo scambiatore proprietario in acciaio utilizzato nei modelli Bluehelix Questa geometria consente allo scambiatore del gruppo termico THERMOBALANCE di funzionare quasi al massimo dell’efficienza di progetto anche in condizioni di parziale intasamento, mentre a parità di quantità di depositi e sedimenti , ad esempio dovuti all’installazione su vecchi impianti , lo scambiatore tende a otturarsi molto più velocemente nella parte a contatto con la fiamma a causa della ridotta area di passaggio del fluido, in cui si viene a costituire una vera e propria barriera di depositi che ostacolano lo scambio termico e riducono l’efficienza al di sotto dei valori nominali. Plus del prodotto > Caldaia con scambiatore primario in acciaio inox ad elevato spessore, con passaggi maggiorati (ai vertici della categoria) a garanzia della durata e della ridotta manutenzione, mantiene un’alta efficienza anche su vecchi impianti con ossidazioni e sporcizia > Raggiunge un’efficienza stagionale del riscaldamento d’ambiente tra le più alte della sua categoria: ηs 94% e in abbinamento al comando remoto modulante e alla sonda esterna opzionale raggiunge la classe di efficienza superiore > Classe 6 NOx : già in linea da quanto previsto da regolamento ErP , emissioni NOx < 56mg/kWh. > MC2 : Multi Combustion Control, nuovo sistema di combustione con tecnologia brevettata gas-adaptive di derivazione industriale per una migliore adattabilità di utilizzo al variare delle condizioni della rete gas , come fluttuazioni o ridotte pressioni. > M.G.R: Metano Gpl Ready, mediante una semplice configurazione la caldaia è in grado di funzionare sia a metano che a gpl senza l’utilizzo di kit di conversione aggiuntivi > Esclusivo sistema scambiatore-bruciatore con porta autoraffreddata senza isolanti : semplifica la manutenzione e ne riduce il costo grazie ad un minor numero di parti deteriorabili. > Produzione istantanea di acqua calda sanitaria con scambiatore sanitario a piastre dedicato > Attacchi idraulici coperti dal mantello della caldaia > Ampio display grafico multifunzione a retroilluminazione per una facile e corretta impostazione parametri > By-pass di serie > Particolarmente adatta al funzionamento in canne fumarie che necessitano di intubamenti “pesanti” grazie alla omologazione per il funzionamento con scarichi fumi diametro 50mm > F.P.S : Sistema di Protezione Fumi. La valvola clapet fumi inserita di serie a bordo della caldaia permette una facile connessione a sistemi collettivi fumari in pressione > Progettata per semplificare ed agevolare le normali operazioni di manutenzione e pulizia > Predisposizione impianti solari : predisposta per la produzione di acqua calda sanitaria combinata con impianti a pannelli solari > Funzione ECO in sanitario per un maggior risparmio nel periodo di scarso utilizzo di acqua calda > Comfort certificato a 3 stelle in produzione sanitaria secondo EN 13203 > Funzionamento a temperatura scorrevole tramite sonda esterna opzionale > Circolatore riscaldamento modulante a basso consumo > Controllo fiamma digitale con tre tentativi di riaccensione in caso di blocco di funzionamento per mancanza rilevazione di fiamma , solo per funzionamento a metano > Luogo di installazione : anche per esterno in luogo parzialmente protetto fino a -5°C di serie e fino a -15°C con l’ausilio del kit resistenze antigelo opzionale Innovativo gruppo termico Ferroli THERMOBALANCETM nei suoi 5 elementi Ferroli ha orientato la progettazione della cella di combustione e dello scambiatore di Bluehelix TECH RRT in modo da massimizzarne i vantaggi funzionali e la robustezza costruttiva, oltre alla semplicità di manutenzione: il design monocircuito fa si che le eventuali bolle d’aria dell’impianto non restino intrappolate nello scambiatore, e ne agevola al massimo la pulizia con il lavaggio chimico, a differenza dagli scambiatori a spirale con doppio circuito parallelo  nei quali se uno solo dei circuiti si ottura il lavaggio chimico risulta molto più laborioso. Scambiatore inox monocircuito ad elevati passaggi, resistente all’intasamento e di facile pulizia Porta bruciatore autoraffreddata senza pannello isolante Esclusivo bruciatore semisferico inox speciale con guarnizione long-life Sistema intelligente “Gas-adaptive” derivato dalle caldaie industriali, che monitora e autostabilizza la combustione al variare delle condizioni gas + fumi Ventilatore disassato, per agevolare la manutenzione del gruppo termico senza smontaggio. Clapet antireflusso fumi integrato per collegamento a C.C.S. Il motore Cella di combustione Il tubo che costituisce lo scambiatore di BLUEHELIX TECH RRT è realizzato in acciaio inossidabile AISI 304, un materiale che permette di realizzare una superficie estremamente liscia, quindi meno aggredibile da agenti incrostanti e depositi. Silenziosità al TOP La nuova progettazione per il comfort La progettazione particolarmente curata di BLUEHELIX TECH RRT ha consentito di raggiungere valori significativi in termini di silenziosità e comfort acustico, tanto che si potrebbe quasi far fatica a distinguere il rumore di fondo di una abitazione dalla rumorosità prodotta dalla caldaia durante il funzionamento a regime. Anche i transitori di accensione/spegnimento della caldaia sono stati ottimizzati in funzione del comfort acustico, cosicché al cliente non toccherà più il fastidio di capire se la caldaia è accesa o spenta dalla sua rumorosità come sulle vecchie generazioni di caldaie. La progettazione ha curato anche il design, realizzando un mantello prezioso in 3 pezzi smontabili, che scende a coprire gli attacchi delle tubazioni. Il controllo in remoto Ambiente e climatico BLUEHELIX TECH RRT è abbinabile ad un’ampia gamma di cronocomandi remoti che permettono la regolazione e la conduzione dell’apparecchio a distanza. La serie ROMEO è composta da più modelli, con programmazione del comfort settimanale o giornaliero e con la possibilità di scegliere per entrambi tra il collegamento a fili o di tipo wireless Con il collegamento alla sonda esterna, BLUEHELIX TECH RRT è in grado di variare la temperatura di impianto in funzione della temperatura esterna misurata sulla base di curve climatiche configurabili, garantendo all’utente un maggior comfort al variare delle condizioni climatiche esterne. Questa funzionalità è interna alla scheda elettronica della caldaia e pertanto non richiede la presenza del comando remoto, rendendo più semplici le operazioni di configurazione nel caso di sostituzione. La funzione modulante di ROMEO consente una modulazione della potenza della caldaia man mano che si raggiunge il valore della temperatura ambiente impostato. Ciò migliora la qualità del comfort eliminando i picchi di calore con un conseguente risparmio energetico Il controllo in caldaia Quadro comandi e funzioni L’elettronica di controllo e gestione permette all’utente di personalizzare il funzionamento dell’apparecchio in modo da gestire il comfort ambientale secondo le proprie esigenze. Il pannello di comando a tasti ed il semplice display LCD, rendono estremamente facili ed intuitive le operazioni di programmazione per la produzione di acqua calda, sia per il sanitario che per il riscaldamento. Grazie alla connessione remota via bus ciò può essere fatto dirattamente anche dal comando remoto Romeo. La scheda è protetta da un fusibile facilmente accessibile grazie allo sportellino dedicato e i collegamenti elettrici beneficiano di una scatola robusta e di grandi dimensioni, con connettori di facile accesso e numerose fascette fermacavi. La caldaia è inoltre predisposta per collegare un secondo termostato ambiente sui morsetti dedicati per gestire impianti di miscelamento multizona MC2 Multi Combustion Control L’elettronica controlla la corrente di ionizzazione di fiamma in modo da garantire una combustione ottimale al variare della densità dell’aria o della qualità del gas. La relazione tra il rapporto aria/gas ed il segnale di ionizzazione di fiamma viene utilizzata per il controllo del rapporto aria gas stesso e quindi della combustione. MC2 : Multi Combustion Control, il nuovo sistema di combustione con tecnologia brevettata gas-adaptive migliora l’adattabilità di utilizzo al variare delle condizioni della rete gas Easy Maintenance Manutenzione senza problemi  Al momento della prima manutenzione, il tecnico si può rendere conto della cura con cui è stato progettato ogni dettaglio per agevolare il suo lavoro. Grazie alla massima accessibilità dei principali componenti, il gruppo termico “Thermobalance”tm permette di eseguire la manutenzione con massima precisione e velocità. Alcuni esempi: - L’accessibilità interna è favorita dal mantello in 3 pezzi con i fianchetti smontabili. - La scatola elettrica della scheda elettronica può essere facilmente estratta dallo chassis e agganciata lateralmente lasciando libero accesso alle parti interne - Il ventilatore disassato dal bruciatore e posto sotto, non deve essere smontato per accedere al gruppo bruciatore-scambiatore in acciaio - La porta del bruciatore è totalmente auto-raffreddata ad aria e quindi non necessita del pannello isolante, evitando il rischio che questo possa danneggiarsi o rompersi durante lo smontaggio per la pulizia. - Il bruciatore si smonta allentando soli 3 bulloni lasciando libero accesso allo scambiatore in acciaio inox. - Lo scambiatore a passaggi extra-maggiorati è concepito per sfidare le acque più dure ed è facilmente pulibile grazie al circuito a tubo singolo non collettorizzato. - Il filtro in ingresso dell’acqua sanitaria può essere estratto con estrema facilità direttamente dall’interno senza dover rimuovere gli attacchi idraulici della caldaia. - L’eventuale smontaggio e la sostituzione dello scambiatore a piastre avviene semplicemente mediante la rimozione di due bulloni a brugola accessibili frontalmente Sostituzione semplificata Scarico fumo ø 50 mm La nuova caldaia può essere installata anche con scarichi per intubamento diametro 50mm. Particolarmente importante nel mercato delle sostituzioni nel caso frequente di canne fumarie collettive che necessitano di intubamenti “pesanti” dove è necessario avere una elevata capacità di espulsione fumi anche con diametri ridotti. F.P.S.: Sistema di Protezione Fumi. La valvola clapet fumi permette una facile connessione a sistemi collettivi fumari in pressione. Per gli installatori la soluzione della canna collettiva in pressione è più economica Comfort & Sicurezza I progettisti hanno pensato ad una serie di funzioni in grado di garantire la qualità dell’acqua sanitaria, la miglior erogazione della potenza all’impianto di riscaldamento abbinati a una più lunga durata dell’apparecchio Funzione Stop And Go Con l’utilizzo di rubinetterie sanitarie a miscelazione brevi o brevissime erogazioni per veloci risciacqui comportano l’avvio della procedura di accensione della caldaia che solitamente si conclude immediatamente. Il perdurare di queste «false partenze» può, alla lunga, compromettere la vita media del prodotto. Per questo BLUEHELIX TECH RRT mette a disposizione un parametro dell’elettronica mediante il quale è possibile ritardare l’accensione del bruciatore attivandolo solamente a fronte di reali prelievi di acqua calda sanitaria Funzione Sun Easy BLUEHELIX TECH RRT è stata progettata per essere facilmente inserita negli impianti realizzati con le più recenti tecnologie. Il sistema SUN EASY, si avvale di un’elettronica che semplifica l’abbinamento con i pannelli solari sia a circolazione naturale che forzata. Tramite un sensore posto sul circuito sanitario controlla in maniera continua la temperatura dell’acqua preriscaldata dai pannelli solari prevedendo l’accensione del bruciatore solo nel caso che quest’ultima scenda sotto il livello necessario a garantire il comfort ottimale all’utente Funzione Eco-Comfort Sanitario In funzionamento ECO la produzione di acqua calda sanitaria avviene secondo gli standard tradizionali consentendo un risparmio energetico nei periodi di non utilizzo. In funzionamento COMFORT, grazie al particolare sistema di mantenimento in temperatura dello scambiatore di calore, l’erogazione di acqua calda sanitaria diventa ancora più rapida e confortevole. Raggiungendo il massimo comfort certificato 3 stelle. L’efficienza e i profili di carico secondo la direttiva ErP sono al top della categoria Installazione esterna e funzione antigelo Per sfruttare al massimo gli spazi a disposizione, la nuova caldaia BLUEHELIX TECH RRT 24C può essere installata ad incasso nella parete grazie all’apposito kit. Per installazioni più critiche, in luoghi completamente scoperti non protetti dagli agenti atmosferici, è disponibile anche il kit “mobiletto verniciato”. Nell’eventualità che la temperatura in caldaia scenda a 5°C, automaticamente si accende il bruciatore e si attiva il circolatore al fine di preservare l’apparecchio dai danni causati dal gelo. Tale funzione è attiva con la caldaia alimentata dal circuito gas e sotto tensione elettrica Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è di 24 mesi dalla data dell'acquisto.

Read more less

ATTENTION THE PRODUCT IS NEW AND CHECKED BY OUR TECHNICIANS, IT HAS TRANSPORT DEFECTS: DEMISES AND LIGHT DENTS ON THE SIDE PANELS NON-STOCK SCREWS ON THE TOP WORN PACKAGING (FOR MORE DETAILS VIEW THE PHOTOS NEXT TO THE MAIN IMAGE). ATTENTION Methane, LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits. For information, contact the authorized service center in your area in advance Energy label specifications according to European ErP directive Heating energy efficiency Class A Energy efficiency of sanitary equipment XL profile Class A Heating/sanitary operation features: Thermal input (PCI) Max Heating: 34.0 kW Thermal input (PCI) Max Sanitary: 34.7 kW Thermal power 80°C-60°C Max Heating: 30 kW Thermal power 80°C-60°C Max Sanitary: 34.0 kW Useful thermal efficiency 30%: 109.8% Max. heating operating pressure bar 3 Heating expansion vessel capacity 10 litres Degree of protection (IEC 60529) IP X5D Power supply voltage V/Hz 230V / 50Hz Electrical power consumption W 88 Dimensions WxHxD mm 420x700x320 5 years without worries Ferroli BLUEHELIX TECH RRT Boiler Ecological condensing wall-mounted boilers with Ferroli Thermobalance™ combustion cell The evolution continues.. The generator range is equipped with the proven AISI 304 stainless steel exchanger. Designed and built according to the new ErP directives for eco-friendly design and labelling, BLUEHELIX TECH RRT is at the top of its category.  BLUEHELIX TECH RRT reaches aEnergy efficiency of space heating among the highest in the boiler category: ηs 94%. Furthermore, when combined with the external probe and the remote control, Romeo reaches the A+ system energy class. Extended warranty with the formula  “5 YEARS WITHOUT WORRIES” The quality of Bluehelix TECH RRT is beyond discussion, and Ferroli is ready to put it to the test by offering its customers an extended warranty coverage that also ensures periodic maintenance and legal checks. TOP efficiency even on old systems The heat exchanger of the thermal group THERMOBALANCE™ of Bluehelix TECH RRT compared to the more classic and widespread steel exchanger used in the past also by the Ferroli Group exclusively on a small series of boilers produced for the English market, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in the Bluehelix models This geometry allows the THERMOBALANCE thermal group exchanger to operate at almost maximum design efficiency even in conditions of partial clogging, while with the same quantity of deposits and sediments, for example due to  for installation on old systems, the exchanger  It tends to clog much more quickly in the part in contact with the flame due to the reduced area of ​​passage of the fluid, in which a real barrier of deposits is formed  which hinder heat exchange and reduce efficiency below nominal values. Product Plus > Water heater with a high thickness stainless steel primary exchanger, with larger passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt >  It reaches aseasonal efficiency of space heating among the highest in its category: ηs 94% and in combination with the modulating remote control and the optional external probe  reaches the highest efficiency class > Class 6 NOx : already in line with what is foreseen by the ErP regulation,  NOx emissions < 56mg/kWh. > MC2 : Mlast Ccombustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to changing gas network conditions, such as fluctuations or reduced pressures. > MGR: Methane Gpl Ready, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits > Exclusive system exchanger-burner with self-cooling door without insulators:  simplifies maintenance and reduces its cost thanks to a smaller number of consumable parts. > Instant production of domestic hot water with dedicated plate sanitary exchanger > Hydraulic connections covered by the boiler mantle > Wide multifunction graphic display backlit for easy and correct parameter setting > Bypass as standard > Particularly suitable for operation in flues that require “heavy” piping thanks to the approval for operation with 50mm diameter flue pipes > FPS : Ssystem of Pprotection Fhum.The flue gas valve inserted as standard on board the boiler allows for easy connection to collective pressurised flue systems > Designed for simplify and facilitate normal operations of maintenance and cleaning > Solar system preparation : designed for the production of domestic hot water combined with solar panel systems > ECO function in sanitary for greater savings in periods of low hot water usage > 3-star certified comfort in sanitary production according to EN 13203 > Sliding temperature operation via optional external probe > Low consumption modulating heating circulator > Digital flame control with three re-ignition attempts in the event of an operating block due to a lack of flame detection, for methane operation only > Place of installation : also for outdoor use in partially protected areas up to -5°C as standard and up to -15°C with the aid of the optional antifreeze resistance kit Innovative Ferroli thermal group  THERMOBALANCETM in its 5 elements Ferroli has oriented the design of the combustion cell and the Bluehelix TECH RRT exchanger in order to maximize the functional advantages and the construction robustness, in addition to the simplicity of maintenance: the single-circuit design ensures that any air bubbles in the system do not remain trapped in the exchanger, and makes cleaning with chemical washing as easy as possible, unlike spiral exchangers with a double parallel circuit.  in which if only one of the circuits gets clogged, the chemical cleaning becomes much more laborious. Exchanger single circuit stainless steel with high passages, clog-resistant and easy to clean Burner holder self-cooled without insulation panel Exclusive stainless steel hemispherical burner special with long-life gasket Intelligent system “Gas-adaptive” derived from industrial boilers, which monitors and self-stabilizes combustion as the gas + fume conditions vary Offset fan, to facilitate the maintenance of the thermal group without disassembly. Anti-reflux flap integrated flue gas for connection to CCS The engine Combustion cell The tube that constitutes the BLUEHELIX TECH RRT exchanger is made of AISI 304 stainless steel, a material that allows the creation of a extremely smooth surface, therefore less susceptible to attack by encrusting agents and deposits. Silence at the TOP The new design for comfort The particularly careful design of BLUEHELIX TECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it would be almost difficult to distinguish the background noise of a home from the noise produced by the boiler during operation at full capacity. The boiler on/off transients have also been optimised for acoustic comfort, so that the customer will no longer have the inconvenience of understanding whether the boiler is on or off from its noise like on older generations of boilers. The design has also been taken care of, creating a precious casing in 3 removable pieces, which descends to cover the pipe connections. Remote control Environment and climate BLUEHELIX TECH RRT can be combined with a wide range of remote timer controls that allow the adjustment and management of the appliance from a distance. The ROMEO series is composed of several models, with weekly or daily comfort programming and with the possibility of choosing for both between wired or wireless connection. With the connection to the external probe, BLUEHELIX TECH RRT is able to vary the system temperature as a function of the external temperature measured on the basis of configurable climate curves, guaranteeing the user greater comfort as external climate conditions vary. This functionality is internal to the boiler's electronic board and therefore does not require the presence of the remote control, making configuration operations easier in the event of replacement. ROMEO's modulating function allows for a power modulation of the boiler as it reaches the room temperature value set. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Boiler control Control panel and functions The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to your needs. The control panel with buttons and the simple LCD display make programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the Romeo remote control. The board is protected by a fuse that is easily accessible thanks to the dedicated cover and the electrical connections benefit from a robust and large box, with easy-to-access connectors and numerous cable ties. The boiler is also designed to connect a second room thermostat on dedicated terminals to manage multi-zone mixing systems MC2 Multi-Combustion Control The electronics controls the flame ionization current to ensure a optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio  and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi-Combustion Control, the new combustion system with patented technology gas-adaptive improves the adaptability of use to changing gas network conditions Easy Maintenance Hassle-free maintenance At the time of the first maintenance, the technician can realize the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the “Thermobalance”tm thermal group allows maintenance to be performed with maximum precision and speed. Some examples: - Internal accessibility is favored by the 3-piece cloak with removable side panels. - The electrical box of the electronic board can be easily extracted from the chassis and hooked laterally leaving free access to internal parts - The fan offset from burner and placed underneath, it does not need to be dismantled to access the steel burner-exchanger group - The burner door it's totally self-cooled air and therefore does not require the insulating panel, avoiding the risk that this may be damaged or broken during dismantling for cleaning. - The The burner can be dismantled by loosening just 3 bolts leaving free access to the stainless steel exchanger. - It exchanger with extra-large passages It is designed to challenge the hardest waters and is easy to clean thanks to the single-tube, non-collectorized circuit. - The input filter of sanitary water can be extract with extreme ease directly from the inside without having to remove the hydraulic connections of the boiler. - Any dismantling and Replacing the plate exchanger it just happens by removing two bolts Allen key accessible from the front Simplified replacement Smoke exhaust ø 50 mm The new boiler can also be installed with 50mm diameter flue pipes. Particularly important in the replacement market in the frequent case of collective flues that require “heavy” intubations where it is necessary to have a high smoke expulsion capacity even with small diameters. FPS.: Ssystem of Pprotection Fumi. The smoke clapet valve  allows a easy connection to collective pressurized flue systems.  For installers, the collective pressurized flue solution is more economical Comfort & Safety The designers have thought of a series of functions capable of guaranteeing the quality of the sanitary water, the best power supply to the heating system combined with a longer life of the appliance. Stop and Go function When using sanitary mixer taps, short or very short deliveries for quick rinses cause the boiler ignition procedure to start, which usually ends immediately. The continuation of these «false starts» can, in the long run, compromise the average life of the product. For this reason BLUEHELIX TECH RRT provides an electronic parameter through which it is possible to delay the ignition of the burner  activating it only in the event of actual domestic hot water withdrawals Sun Easy Function BLUEHELIX TECH RRT has been designed to be easily inserted into systems created with the latest technologies. The SUN EASY system uses electronics that Simplifies pairing with solar panels both natural and forced circulation.Through a sensor placed on the sanitary circuit it continuously monitors the temperature of the water preheated by the solar panels, providing for the ignition of the burner only in the event that the latter falls below the level necessary to guarantee optimal comfort for the user. Eco-Comfort Sanitary Function In ECO mode, the production of domestic hot water occurs according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the special system for maintaining the temperature of the heat exchanger, the supply of domestic hot water becomes even faster and more comfortable. Achieving maximum 3-star certified comfort.  Efficiency and load profiles according to ErP directive are top of the class External installation and anti-freeze function To make the most of the available space, the new BLUEHELIX TECH RRT 24C boiler can be installed flush with the wall using the special kit. For more critical installations, in completely uncovered places not protected from atmospheric agents, the “painted cabinet” kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically switches on and the circulator is activated in order to protect the appliance from damage caused by frostThis function is active with the boiler powered by the gas circuit and under electrical voltage Product Warranty : All products for sale on our site are new and packaged. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENZIONE IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO: RIENTRANZA PARTE SUPERIORE LEGGERA AMMACCATURA LATO POSTERIORE GRAFFI AL LATERALE SINISTRO PIEDI D'APPOGGIO NON DI SERIE IMBALLO NON ORIGINALE (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE).  ATTENZIONE  LA CALDAIA VIENE FORNITA A METANO. FUNZIONAMENTO CERTIFICATO ANCHE A GPL MEDIANTE APPOSITO KIT DA RICHIEDERE PREVENTIVAMENTE AL CENTRO ASSISTENZA AUTORIZZATO DI ZONA Caldaia Ferroli a Basamento Bluehelix B 35 kW Metano o Gpl completa di Kit Scarico Fumi - New ErP Classe ERP (Classe G - A++) A Portata termica (P.C.I.) Min / Max Riscaldamento kW 6,7 / 32,0 Potenza termica 80°C-60°C Min / Max Riscaldamento kW 6,6 / 31,4 Potenza termica 50°C-30°C Min / Max Riscaldamento kW 7,2 / 34,0 Classe di emissioni Nox classe 6 Dimensioni AxLxP 850x400x595 BLUEHELIX B a basamento > PUNTI DI FORZA: Raggiunge un’efficienza stagionale del riscaldamento d’ambiente tra le più alte della sua categoria: ηs 94% (solo mod. 35) in abbinamento al comando remoto modulante e alla sonda esterna (opzionali) raggiunge la classe di efficienza superiore A+ (scala da G ad A+++) (solo mod. 35)  Scambiatore di calore primario in acciaio inox Bruciatore a premiscelazione totale in acciaio inox con ampio range di modulazione Circolatore riscaldamento modulante a basso consumo (Erp Ready - Classe A) Comandi digitali con display di interfaccia utente, multifunzionale per una facile e corretta impostazione dei parametri Abbinabile al cronocomando remoto modulante Attacchi idraulici e gas di facile accesso per favorire le sostituzioni dei vecchi generatori Scarico fumi con tubi sdoppiati o coassiali; possibilità di uscita lato destro e sinistro, posteriore > VANTAGGI DI BLUEHELIX B: Minime emissioni inquinanti (classe 6 secondo EN 15502-1)  Funzionamento a temperatura scorrevole in abbinamento alla sonda esterna opzionale Funzione di protezione dello scambiatore con controllo Δt Antibloccaggio circolatore temporizzato Controllo fiamma digitale con tre tentativi di riaccensione in caso di blocco di funzionamento per mancanza di rivelazione di fiamma (solo in funzionamento a metano) Funzione antigelo con protezione di serie fino a -5°C Trasformazione metano/GPL/Aria propanata gratuita in sede di verifica del prodotto ed attivazione della garanzia, da richiedere al Centro Assistenza Autorizzato Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto

Read more less

Overview FERROLI BLUEHELIX TECH 35C CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP 2015: Wall-mounted condensing, premixed, sealed chamber boilers with instantaneous domestic hot water production with double exchanger. IN THE ABSENCE OF THE PRODUCT, THE NEW MODEL BLUEHELIX RRT C 34 WILL BE SUPPLIED, which can be viewed at this link: https://www.climaconvenienza.it/it/caldaia-a-gas-ferroli-bluehelix-tech-rrt-34c-metano-o-gpl-completa-di-kit-scarico-fumi-new/ Technical specifications Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitaryware energy efficiencyprofilXXL Class A Characteristics of heating/sanitary exercises: Sealed chamber condensing boiler Thermal input (PCI)ÿMax Heating: 32 kW Thermal capacity (PCI)ÿMax DHW: 34.8 kW Heating power 80øC-60øCÿMax Heating:ÿ31.4 kW Thermal power 80øC-60øCÿMax Sanitary:ÿ34.1 kW Thermal efficiencyÿ80øC-60øC: 98% Useful thermal efficiencyÿ50øC-30øC: 106.1% Efficiency termicuseÿCaricridott30%: 108.8% Domestic hot water productionÿt 30øC: 16.3 l/min Domestic hot water productionÿt 25øC: 19.5 l/min Energy certification (92/42 EEC): **** Degrees of protection: IPX5D Extremely compact dimensions (hxlxp): 600 x 400 x 320 mm; 31kg Power supply: LPG Features list BLUE HELIX TECH Wall-mounted condensing boilers, premixed sealed chamber with instantaneous sanitary production New series of compact wall-mounted condensing boilers with instantaneous domestic hot water production. Designed to guarantee maximum energy efficiency in heating and in the supply of domestic hot water, thanks to the new bivalent exchanger patented in AISI 316 TI stainless steel. This new exchanger integrates the heating circuit and the production of domestic hot water in a single element, pushing the phenomenon of condensation to the maximum. Built to be installed outdoors in partially protected places and equipped with electronics capable of integrating with a solar panel system. The range: Range made up of two models, respectively 27 and 35 kW, running on LPG, LPG, propane air. Strengths: Boiler body with patented high performance primary heat exchanger in AISI 316 TI stainless steel Instantaneous production of domestic hot water with a dedicated plate domestic hot water exchanger Total premix burner in stainless steel Digital control panel Electronic flame modulation in both heating and DHW Can be combined with the modulating remote timer control Large graphic multifunction display with backlighting for easy and correct setting of the parameters Standard by-passÿ Refined design compact size Casing painted white by anaphoresis with epoxy powders Advantages : ÿECOÿfunctionin sanitaryware for greaterÿsavingÿin the period of low use of hot water 3-star certified comfort in sanitary production according to EN 13203 Sliding temperature operationÿby means of an optional external probe Low-consumption modulating heating circulator (Erp Ready - Class A):ÿRegulation 622/2012 requires that all boilers placed on the market from 1 August 2015 be equipped with a low-consumption circulator, otherwise defined as class A. This is a decision that starts from consideration of the enormous energy expenditure of the pumps and circulators installed in the various applications. In practice, or by analyzing the impact of the low-consumption circulator integrated in the boiler, this reduces the total electricity consumption of the generator by 30%. Digital flame monitor with three re-ignition attempts in the event of blockage due to lack of flame detection (LPG model) Predisposition for solar systems:ÿpredisposed for the production of domestic hot water combined with solar panel systems Place of installation:ÿalso for outdoorsin a partially protected place up to -5øC as standard and up to -15øC with the aid of the optional antifreeze heater kit Operation certified also with propane airÿ (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center Appliance belonging to class 5, the most ecological required by European standards (UNI EN 297 NOX and 483) Products that fall under the tax benefits provided for by the Finance Law in force Functions: ECO-COMFORT function: In COMFORT mode, thanks to the particular system for maintaining the temperature of the heat exchanger, the delivery of domestic hot water becomes even more rapid and comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Sliding temperature operation:ÿWith the installation of the kit or External probe? possible to operate the boiler in sliding temperature. This means that without acting on the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while guaranteeing maximum comfort for the user. Antifreeze function: In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by freezing. This function is active with the boiler powered by the gas circuit and electrical undervoltage. Sun Easy function: BLUEHELIX TECH has been designed to be easily inserted in systems made with the most recent technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. By means of a post sensor on the sanitary circuit, it continuously checks the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only when the latter drops to the level necessary to guarantee optimal comfort for the user. Tangible facts: Regulation 622/2012 provides that all boilers placed on the market from August 1, 2015 be equipped with a low-consumption circulator, otherwise defined as class A. This is a decision that starts from the consideration of the enormous energy expenditure of the pumps and circulators installed in the various applications. In practice, or by analyzing the impact of the low-consumption circulator integrated in the boiler, this reduces the total electricity consumption of the generator by 30%. consumption max. standard non-modulating circulator:ÿ0.085 kWÿ consumption max. new high efficiency circulator:ÿ0.04 kWÿ Degree daysÿ2500ÿ(average climate zone E)ÿ Energy cost:ÿ0.19 ??¶/kWhÿ Hypothetical annual expenditure at max standard circulator speed:ÿ40.375 ??¶ÿ Hypothetical annual expenditure max speed high efficiency circulator:ÿ11.4 ??¶ÿ Therefore, with the replacement of standard boilers with Bluehelix Pro, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W ERP extension The new European regulations for heat generatorsÿ The 4 ErP Regulations on: ÿEcodesignÿ (minimum efficiency limits) and Energy Labeling (information energy label) are mandatory European provisions automatically in force from 26 September 2015 simultaneously in the 28 EU countries and in all EEA countries (European Economic Areas: Liechtenstein, Switzerland, Norway, Iceland). The Regulations (or EU Regulation? nr.: 811/2013, 812/2013, 813/2013 and 814/2013) are already published by the EU and are legal provisions which leave no legislative power (of modification/variation of delayed adoption) to the EU Member States, in so far as they do not require any national law of adoption, but come into force automatically or per se? throughout Europe.ÿ From 26th September 2015, boilers, heat pumps, tanks/boilers, water heating systems or non-ErP compliant systems will not be able to leave the factories and warehouses of MANUFACTURERS (nor from the warehouses of IMPORTERS from outside the EU), except for products for which it has already been carried out the placing on the market or the transfer of formal ownership (before 26 September) to the first customer/distributor of the commercial chain. The date which is the date on which the finished product was first placed on the market. In practice, by virtue of the new Regulations, manufacturers in the EU area and importers from outside the EU will be obliged to offer for sale only highly efficient products and systems, both for space heating and for the preparation of domestic hot water. Will the end customer be able to find latest generation products immediately on the market? which will be compulsorily accompanied by the ENERGY LABEL and compliant with the MINIMUM LIMITS calculated according to strict European standards which for the first time for these new products or ErP? considers all types of direct and indirect consumption of appliances, e.g. gas consumption and electricity consumption in a boiler.ÿ New ErP efficiency limits (and noise for heat pumps only) will apply to heating systems (boilers and heat pumps) up to 400 kW, to instantaneous gas and electric water heater systems up to 400 kW, to DHW tanks up to 2,000 kW lt. All new products and systems must be of very high efficiency, with the sole exception of tipB1x boilers (open chamber with natural draft) which will have a special derogation and may still be manufactured and sold exclusively to be installed in REPLACEMENTS on COLLECTIVE FLUES . Heat pumps will have to comply with new minimum limits for noise emissions, while for boilers the noise value will have to be indicated (without limit constraints). Furthermore, even the circulators mounted on board all the products must comply with new minimum efficiency standards (very high efficiency), based on the specific EU Regulations (nr. 641/2009 and nr. 622/2012). To make the most of all the possibilities offered by the energy label, will it be possible to predict and declare their use in a system right from the product conception and development stage? with other devices (e.g. regulation and control), thus proposing a globally more efficient whole, e.g. eg. through the use of renewable sources (solar thermal, geothermal aerothermal energy, biomass). Even the so-called or standard products? today the best sellers - i.e. boilers for gas heating - will undergo a forced evolution towards technology with heat recovery from fumes (condensing boiler). We remind you that condensing boilers can recover the heat from the fumes in most of the existing systems, even those with radiators, with the use of thermostatic valves now available in various models (also programmable individually on different times), due to their different conception of design incorporating substantial improvements over previous or standard boilers? such as the new highly efficient modulating circulators and the combustion control volume in the new premix burners. Subsequently, for products sold by manufacturers and importers from outside the EU after 26 September 2018, more stringent limits for NOx emissions will come into force Theÿ20/20/20 climate-energy package?ÿsets ambitious targets for the reduction of greenhouse gas emissions, energy consumption as well as the increase in the use of renewable energies, corresponding to a percentage of 20% to be reached by 2020. In this context , the regulationeuropeErP (Energy Related Products) introduces an energy classification also for hot water generators for space heating and domestic hot water purposes. This classification translates into an ÿenergy labelÿ which must necessarily accompany all the products affected by the Regulation, introduced on the market from 26 September 2015. The labeling constitutes an easy guide for the consumer, who can choose - through standardized and objective indications - the most efficient product. In this way, the choice will be the most sparing in terms of consumption for the benefit of the user, but also the most virtuous for energy balances and consequently, for the environment. The most significant parameters indicated on the label are the seasonal efficiency index in heating and efficiency in the eventual production of domestic hot water, according to a scale which in the casdel prodottsingolcaldaia ranges from A to G*. Furthermore, for combined boilers, a load profile is indicated corresponding to the domestic hot water flow rate of the appliances measured in a series of sample samples, thus guaranteeing the declared sanitary efficiency. This index is identified with a letter/?size? (S, M,¶ÝXXL). Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview FERROLI BLUEHELIX TECH 35C CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP 2015: Wall-mounted condensing, premixed, sealed chamber boilers with instantaneous domestic hot water production with double exchanger. IN THE ABSENCE OF THE PRODUCT, THE NEW MODEL BLUEHELIX RRT C 34 WILL BE SUPPLIED, which can be viewed at this link: https://www.climaconvenienza.it/it/caldaia-a-gas-ferroli-bluehelix-tech-rrt-34c-metano-o-gpl-completa-di-kit-scarico-fumi-new/ Technical specifications Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitaryware energy efficiencyprofilXXL Class A Characteristics of heating/sanitary exercises: Sealed chamber condensing boiler Thermal input (PCI)ÿMax Heating: 32 kW Thermal capacity (PCI)ÿMax DHW: 34.8 kW Heating power 80øC-60øCÿMax Heating:ÿ31.4 kW Thermal power 80øC-60øCÿMax Sanitary:ÿ34.1 kW Thermal efficiencyÿ80øC-60øC: 98% Useful thermal efficiencyÿ50øC-30øC: 106.1% Efficiency termicuseÿCaricridott30%: 108.8% Domestic hot water productionÿt 30øC: 16.3 l/min Domestic hot water productionÿt 25øC: 19.5 l/min Energy certification (92/42 EEC): **** Degrees of protection: IPX5D Extremely compact dimensions (hxlxp): 600 x 400 x 320 mm; 31kg Power supply: METHANE Features list BLUE HELIX TECH Wall-mounted condensing boilers, premixed sealed chamber with instantaneous sanitary production New series of compact wall-mounted condensing boilers with instantaneous domestic hot water production. Designed to guarantee maximum energy efficiency in heating and in the supply of domestic hot water, thanks to the new bivalent exchanger patented in AISI 316 TI stainless steel. This new exchanger integrates the heating circuit and the production of domestic hot water in a single element, pushing the phenomenon of condensation to the maximum. Built to be installed outdoors in partially protected places and equipped with electronics capable of integrating with a solar panel system. The range: Range made up of two models, respectively 27 and 35 kW, running on methane, LPG, propane air. Strengths: Boiler body with patented high performance primary heat exchanger in AISI 316 TI stainless steel Instantaneous production of domestic hot water with a dedicated plate domestic hot water exchanger Total premix burner in stainless steel Digital control panel Electronic flame modulation in both heating and DHW Can be combined with the modulating remote timer control Large graphic multifunction display with backlighting for easy and correct setting of the parameters Standard by-passÿ Refined design compact size Casing painted white by anaphoresis with epoxy powders Advantages : ÿECOÿfunctionin sanitaryware for greaterÿsavingÿin the period of low use of hot water 3-star certified comfort in sanitary production according to EN 13203 Sliding temperature operationÿby means of an optional external probe Low-consumption modulating heating circulator (Erp Ready - Class A):ÿRegulation 622/2012 requires that all boilers placed on the market from 1 August 2015 be equipped with a low-consumption circulator, otherwise defined as class A. This is a decision that starts from consideration of the enormous energy expenditure of the pumps and circulators installed in the various applications. In practice, or by analyzing the impact of the low-consumption circulator integrated in the boiler, this reduces the total electricity consumption of the generator by 30%. Digital flame monitor with three re-ignition attempts in the event of blockage due to lack of flame detection (methane model) Predisposition for solar systems:ÿpredisposed for the production of domestic hot water combined with solar panel systems Place of installation:ÿalso for outdoorsin a partially protected place up to -5øC as standard and up to -15øC with the aid of the optional antifreeze heater kit Operation certified also with propane airÿ (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center Appliance belonging to class 5, the most ecological required by European standards (UNI EN 297 NOX and 483) Products that fall under the tax benefits provided for by the Finance Law in force Functions: ECO-COMFORT function: In COMFORT mode, thanks to the particular system for maintaining the temperature of the heat exchanger, the delivery of domestic hot water becomes even more rapid and comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Sliding temperature operation:ÿWith the installation of the kit or External probe? possible to operate the boiler in sliding temperature. This means that without acting on the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while guaranteeing maximum comfort for the user. Antifreeze function: In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by freezing. This function is active with the boiler powered by the gas circuit and electrical undervoltage. Sun Easy function: BLUEHELIX TECH has been designed to be easily inserted in systems made with the most recent technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. By means of a post sensor on the sanitary circuit, it continuously checks the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only when the latter drops to the level necessary to guarantee optimal comfort for the user. Tangible facts: Regulation 622/2012 provides that all boilers placed on the market from August 1, 2015 be equipped with a low-consumption circulator, otherwise defined as class A. This is a decision that starts from the consideration of the enormous energy expenditure of the pumps and circulators installed in the various applications. In practice, or by analyzing the impact of the low-consumption circulator integrated in the boiler, this reduces the total electricity consumption of the generator by 30%. consumption max. standard non-modulating circulator:ÿ0.085 kWÿ consumption max. new high efficiency circulator:ÿ0.04 kWÿ Degree daysÿ2500ÿ(average climate zone E)ÿ Energy cost:ÿ0.19 ??¶/kWhÿ Hypothetical annual expenditure at max standard circulator speed:ÿ40.375 ??¶ÿ Hypothetical annual expenditure max speed high efficiency circulator:ÿ11.4 ??¶ÿ Therefore, with the replacement of standard boilers with Bluehelix Pro, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W ERP extension The new European regulations for heat generatorsÿ The 4 ErP Regulations on: ÿEcodesignÿ (minimum efficiency limits) and Energy Labeling (information energy label) are mandatory European provisions automatically in force from 26 September 2015 simultaneously in the 28 EU countries and in all EEA countries (European Economic Areas: Liechtenstein, Switzerland, Norway, Iceland). The Regulations (or EU Regulation? nr.: 811/2013, 812/2013, 813/2013 and 814/2013) are already published by the EU and are legal provisions which leave no legislative power (of modification/variation of delayed adoption) to the EU Member States, in so far as they do not require any national law of adoption, but come into force automatically or per se? throughout Europe.ÿ From 26th September 2015, boilers, heat pumps, tanks/boilers, water heating systems or non-ErP compliant systems will not be able to leave the factories and warehouses of MANUFACTURERS (nor from the warehouses of IMPORTERS from outside the EU), except for products for which it has already been carried out the placing on the market or the transfer of formal ownership (before 26 September) to the first customer/distributor of the commercial chain. The date which is the date on which the finished product was first placed on the market. In practice, by virtue of the new Regulations, manufacturers in the EU area and importers from outside the EU will be obliged to offer for sale only highly efficient products and systems, both for space heating and for the preparation of domestic hot water. Will the end customer be able to find latest generation products immediately on the market? which will be compulsorily accompanied by the ENERGY LABEL and compliant with the MINIMUM LIMITS calculated according to strict European standards which for the first time for these new products or ErP? considers all types of direct and indirect consumption of appliances, e.g. gas consumption and electricity consumption in a boiler.ÿ New ErP efficiency limits (and noise for heat pumps only) will apply to heating systems (boilers and heat pumps) up to 400 kW, to instantaneous gas and electric water heater systems up to 400 kW, to DHW tanks up to 2,000 kW lt. All new products and systems must be of very high efficiency, with the sole exception of tipB1x boilers (open chamber with natural draft) which will have a special derogation and may still be manufactured and sold exclusively to be installed in REPLACEMENTS on COLLECTIVE FLUES . Heat pumps will have to comply with new minimum limits for noise emissions, while for boilers the noise value will have to be indicated (without limit constraints). Furthermore, even the circulators mounted on board all the products must comply with new minimum efficiency standards (very high efficiency), based on the specific EU Regulations (nr. 641/2009 and nr. 622/2012). To make the most of all the possibilities offered by the energy label, will it be possible to predict and declare their use in a system right from the product conception and development stage? with other devices (e.g. regulation and control), thus proposing a globally more efficient whole, e.g. eg. through the use of renewable sources (solar thermal, geothermal aerothermal energy, biomass). Even the so-called or standard products? today the best sellers - i.e. boilers for gas heating - will undergo a forced evolution towards technology with heat recovery from fumes (condensing boiler). We remind you that condensing boilers can recover the heat from the fumes in most of the existing systems, even those with radiators, with the use of thermostatic valves now available in various models (also programmable individually on different times), due to their different conception of design incorporating substantial improvements over previous or standard boilers? such as the new highly efficient modulating circulators and the combustion control volume in the new premix burners. Subsequently, for products sold by manufacturers and importers from outside the EU after 26 September 2018, more stringent limits for NOx emissions will come into force Theÿ20/20/20 climate-energy package?ÿsets ambitious targets for the reduction of greenhouse gas emissions, energy consumption as well as the increase in the use of renewable energies, corresponding to a percentage of 20% to be reached by 2020. In this context , the regulationeuropeErP (Energy Related Products) introduces an energy classification also for hot water generators for space heating and domestic hot water purposes. This classification translates into an ÿenergy labelÿ which must necessarily accompany all the products affected by the Regulation, introduced on the market from 26 September 2015. The labeling constitutes an easy guide for the consumer, who can choose - through standardized and objective indications - the most efficient product. In this way, the choice will be the most sparing in terms of consumption for the benefit of the user, but also the most virtuous for energy balances and consequently, for the environment. The most significant parameters indicated on the label are the seasonal efficiency index in heating and efficiency in the eventual production of domestic hot water, according to a scale which in the casdel prodottsingolcaldaia ranges from A to G*. Furthermore, for combined boilers, a load profile is indicated corresponding to the domestic hot water flow rate of the appliances measured in a series of sample samples, thus guaranteeing the declared sanitary efficiency. This index is identified with a letter/?size? (S, M,¶ÝXXL). Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ferroli Bluehelix TOP RRT 34C methane or LPG condensing boiler Complete with Smoke Exhaust Kit Remote Control Dirt Remover and Dosing Pump STANDARD 0T3F3XWA - NEW Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Thermal power 80°C-60°C Max Heating: kW 97,9 / 98 Heating max / min heat input (Hs) kW 34 / 3.2 Thermal power 50°C-30°C Max Sanitary: 106.1 / 107.5 kw Useful thermal efficiency 30%: 109.5 Max working pressure heating bar 3 Sanitary flow rate ∆t 25°C 19.5 NOx class 6 Supply voltage V/Hz 230V / 50Hz Dimensions HxWxD mm 700x420x320 Free methane/LPG/propaneted air transformation when checking the product and activating the warranty, to be requested from the Authorized Assistance Center - MGR: Methane, LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits BLUEHELIX TOP RRT STRENGTHS: - Boiler with thick stainless steel primary exchanger, with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt - Boiler particularly robust and suitable for replacement even in particularly critical and resistant systems - Wide range of accessories supplied as standard with the product: CONNECT, latest generation wifi remote control with management via app / Magnetic dirt separator filter with corrosion inhibitor / Polyphosphate dosing filter for domestic hot water inlet - Boosted modulating heating circulator with high head on all models able to adapt even to particularly resistant systems (Erp Ready - Class A) - Enhanced domestic hot water exchanger with a high number of plates particularly immune to blockages and capable of maintaining the domestic hot water production capacity constant over time - A+ System : thanks to the combination with the CONNECT modulating remote control supplied as standard and reading the outside temperature directly from the internet, it reaches maximum energy efficiency A+ (scale from G to A+++) - Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:12 (mod. 34C, 1:10 mod. 28C) - MC2 : Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) - MGR: Methane, LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits - Exclusive exchanger-burner system with self-cooled door: simplifies maintenance and reduces its cost thanks to fewer parts to replace - Hydraulic connections covered by the boiler shell, standard by-pass > BENEFITS OF BLUEHELIX TOP RRT C: - Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes - FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard - Designed to simplify and facilitate normal maintenance and cleaning operations - STOP AND GO: It is possible to delay the ignition of the burner by activating it only in the face of real withdrawals of domestic hot water - Minimum polluting emissions (class 6 according to EN 15502-1) - Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) - Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit - Transformation of methane/LPG/Free propane air Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less