FERROLI BLUEHELIX K 50 25 Kw CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Characteristics: Seasonal space heating energy efficiency class A Water heating energy efficiency class A Declared load profile XL Heat Capacity (PCI) Min / Max Heating: 5.8 / 25.0 Thermal power 80°C-60°C: 5.7 / 24.5 Useful thermal efficiency 80°C-60°C Pmax % / Pmin %: 98.0 / 97.8 Emission class Nox class 5 Boiler capacity 50 litres Domestic hot water production Δt 30°C l/10 min 175 Sanitary Manufacturing (EN 13203) ★★★ Heating working pressure Max bar 3 DHW working pressure Max bar 9 Empty weight kg 50 Dimensions HxWxD: 800 x 600 x 420 Power supply: METHANE Certified operation also with LPG using a special kit to be requested from the Authorized Assistance Centre CHARACTERISTICS Boiler body with the new patented primary exchanger in thick AISI 316 TI stainless steel Production of domestic hot water with 50-litre stainless steel domestic hot water storage tank Total premix burner in stainless steel Electronic flame modulation both in heating and DHW Digital control panel Can be combined with the modulating remote timer control Low consumption modulating heating pump (Erp Ready - Class A) Refined design and compact size Casing painted in white by anaphoresis with epoxy powders 3-star certified comfort in sanitary manufacturing according to EN 13203 Sliding temperature operation via optional external probe Digital flame control with three re-ignition attempts in case of operation due to lack of flame detection (methane model) Arrangement for recirculation attachments Standard by-pass Place of installation: also for outdoors in a partially protected place up to - 5 ° C as standard TANGIBLE FACTS max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh * Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure at max speed of high efficiency circulator: €11.4 Therefore, with the replacement of standard boilers with Bluehelix K 50, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W. The low-consumption circulator installed in the Bluehelix K 50 has a variable flow rate, with ΔT control. The advantages o ered are many, including: System start-up from cold: faster start-up with full control of the thermal load on the components Long-lasting maintenance of the temperature equilibrium conditions, once the set point has been reached Better operation in limit conditions (e.g. at minimum power), reduction of on-oFF states Reactivity to variations in the thermal load, an appreciable quality in multi-zone systems ..ROBUST Others are the merits attributable to the circulator chosen for Bluehelix K 50: The PWM signal (pulse width modulation) to the circulator allows extremely rapid intervention times to complete an advanced and complete electronic platform. This results in a drastic reduction of the ON-OFF events of the burner and the circulator. Electronic control of the drive torque at start up with consequent reduction of the risk of blocking. The routine anti-seize cycle is in any case carried out every 24 hours of inactivity. Self-protection function in case of overheating Less noise All this translates into greater longevity not only of the circulator, but also of the components subject to wear and tear from frequent on-off cycles. COMFORT AND SAFETY The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance. SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. ANTI-LEGIONELLA FUNCTION In order to keep the storage cylinder in suitable hygienic-sanitary conditions, the product electronics are able to keep it at a temperature of 65°C at programmable time intervals from one to seven days. ANTI-BLOCK FUNCTION In order to avoid blockage and consequent damage to the heating circulator and the three-way diverter valve, after a set period of inactivity, the boiler electronics activate operation for a few seconds. ANTIFREEZE FUNCTION In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. ECONOMY/COMFORT FUNCTION By activating the appropriate key, heating/temperature maintenance can be excluded by the user (Economy). This makes it possible to reduce fuel consumption during periods of non-use of domestic water Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Bluehelix Pro 25C Energy label specifications according to the European ErP directive Heating energy efficiency class: A Sanitary energy efficiency class XL profile: A NOx class : 5 Characteristics of heating/DHW operation: Heating Thermal Power: 25 kW Thermal Power in Sanitary: 27 kW Maximum Heating Power 80°C - 60°C : 24.5 kW Useful Thermal Efficiency 80°C - 60°C: 98% Useful Thermal Efficiency 50°C - 30°C : 106% Domestic hot water production Δt 30°C: 12.9 l/min Domestic hot water production Δt 25°C: 15.5 l/min Energy certification (92/42 EEC): **** Degree of protection: IP X5D Power supply: LPG Dimensions and weight Extremely Compact Dimensions (HxWxD): 600x400x320 mm Weight : 29Kg Ferroli boiler BLUEHELIX PRO Wall-mounted condensing boilers, premixed sealed chamber with instantaneous domestic hot water production BLUEHELIX PRO has been designed to guarantee maximum energy efficiency and performance both in heating and in the supply of domestic hot water thanks to the new bivalent exchanger in Aisi 316 Ti stainless steel. Built to be installed outdoors in partially protected places and equipped with electronics capable of integrating with a solar panel system. New series of compact wall-mounted condensing boilers with instantaneous domestic hot water production This new exchanger integrates the heating circuit and the production of instantaneous domestic hot water in a single element, thus optimizing the phenomenon of condensation. Bluehelix Pro achieves one of the highest energy efficiency of space heating in its category: ηs 94% . Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+ . The Range Bluehelix Pro is available in 2 models, both running on methane and LPG. Both the 25C model and the larger size, 32C, offer large volumes of domestic hot water, quickly, which can be further reduced by activating the "Comfort" function PLUS Product > New bivalent primary exchanger in Aisi 316 Ti stainless steel with “SELFCLEANING” function > High yields in both heating and domestic hot water production > Total premix burner in stainless steel > Electronic flame modulation both in heating and DHW > Digital control panel , complete with hydrometer > Can be combined with the modulating remote timer control . Programmable for one second > High efficiency modulating heating circulator (Erp Ready - Class A) > Refined design and compact dimensions > Casing painted white by anaphoresis with epoxy powders > Ease of access to internal components for any maintenance > 3-star certified comfort in sanitary production according to EN 13203, amended by Reg. 812/2013 > Sliding temperature operation via optional external probe > Digital flame control with three re-ignition attempts in the event of blockage due to lack of flame detection (methane model) > Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems > Standard by-pass > Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit > IPX5D protection index, equivalent to excellent electrical protection of the boiler from liquids and foreign bodies > Achieves one of the highest seasonal space heating efficiency in its category: ηs 94% System energy class A+ , with the combination of the external probe and the Romeo modulating timer control Components The Exchanger The Ferroli design applied to the combined heat exchangers once again stood out for a simple and high-performance solution, made with the best materials Structure The exchanger consists of a concentric spiral without joints or welds. An additional pipe is inserted inside the main spiral - which serves the heating system - for the preparation of domestic hot water. The latter is not linked to the main coil, but remains immersed, in a "bain-marie" in the system fluid Self-Cleaning function The generous cross-section of the exchanger tubes allows for a free, ample passage of water. The serpentine conformation contrasts the deposit of impurities, not only due to the regularity of the path crossed by the water but also due to the "centrifugal" effect impressed on the water itself on the walls of the serpentine. Furthermore, the absence of circuits in parallel, both on the heating and DHW sides, makes any chemical washing operations of the exchanger and the elimination of any air present in the system circuit extremely easy. Full Condensation The integration of both the domestic hot water exchanger and the primary one in a single block reduces the average operating temperatures even during the production of domestic hot water. This favors condensation and gives the boiler high efficiency not only in heating, but also in domestic hot water Material The tube that makes up the Bluehelix Pro exchanger is made of AISI 316 ti stainless steel . It is a so-called austenitic alloy, particularly resistant to corrosion, enriched with the addition of titanium. it is also a material that allows for the creation of an extremely smooth surface, therefore less susceptible to encrusting agents and after-effects Cheap Plus . Ecological. Efficient. Self-Adaptive The low-consumption circulator installed in the Bluehelix Pro has a variable flow rate, with ΔT control. The advantages offered are many, including: • System start-up from cold: faster start-up with full control of the thermal load on the components • Permanent maintenance of the temperature equilibrium conditions, once the set point has been reached • Better operation in limit conditions, reduction of on-of states • Reactivity to variations in the thermal load, an appreciable quality in multi-zone systems Robust Others are the merits attributable to the circulator chosen for Bluehelix Pro: • The PWM signal (pulse width modulation) to the circulator allows extremely rapid intervention times to complete an advanced and complete electronic platform. This results in a drastic reduction of the ON-OFF events of the burner and the circulator • Electronic control of the drive torque at start up with consequent reduction of the risk of blocking. The routine anti-seize cycle is in any case carried out every 24 hours of inactivity • Self-protection function in case of overheating • Less noise All this translates into greater longevity not only of the circulator, but also of the components subject to wear and stress from frequent on-off cycles Panel Boiler Control , Commands and Functions The BLUEHELIX PRO control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs. The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Romeo Chronothermostat Remote Control The BLUEHELIX PRO boiler can be combined with a wide range of remote timer controls which allow the appliance to be adjusted and operated remotely. Comfort programming is on a weekly basis, even with a holiday function. Romeo is available with wired or wireless connection With the ROMEO Chronothermostat you can: • Adjust the heating and DHW temperatures • Know the operating status of the boiler • View the temperatures inside and outside the house • Restart the boiler in the event of a temporary block • Program the daily or weekly ambient comfort • Activate/deactivate the heating function via the telephone (dial not supplied) System energy class A+ in combination with the external probe and remote timer control The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Functions: ECO-COMFORT function: In COMFORT mode, thanks to the particular system for maintaining the temperature of the heat exchanger, the dispensing of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Sliding temperature operation: By installing the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. Antifreeze function: In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by freezing. This function is active with the boiler powered by the gas circuit and under electrical voltage. Sun Easy function: BLUEHELIX TECH has been designed to be easily inserted in systems made with the latest technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user. "SELF-CLEANING" function: Thanks to the "spiral" shape, the passage of domestic water inside the exchanger produces a "centrifugal" self-cleaning effect on the internal walls which tends to remove any limescale deposits. Tangible facts: Regulation 622/2012 provides that all boilers placed on the market from 1 August 2015 are equipped with a low-consumption circulator, otherwise defined as "class A". It is a decision that starts from the consideration of the enormous energy expenditure of the pumps and circulators installed in the various applications. In practice, i.e. by analyzing the impact of the low-consumption circulator integrated in the boiler, it reduces up to 30% of the total electricity consumption of the generator. max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure at max speed of high efficiency circulator: €11.4 Therefore, with the replacement of standard boilers with Bluehelix Pro, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available In case of unavailability, the new DIVATECH D LNC 24 model will be supplied Technical features Model : Divaproject C24 Power supply: methane Performance Energy efficiency class in heating: C DHW energy efficiency class: A Heating nominal heat output : 7.0 ~ 23.5 kW Heat output : 8.3 ~ 25.8 kW Domestic useful thermal power: 23.5 kW Efficiency : 91 % Maximum production of domestic hot water Δt 25°C : 13.4 l/min Maximum production of domestic hot water Δt 30°C : 11.2 l/min Dimensions and weight Dimensions (HxWxD): 700x400x330 mm Empty weight: 27.0 kg Ferroli Divaproject Boiler Wall mounted boilers with instantaneous DHW production with double exchanger, open chamber, natural draft The Divaproject c24 by Ferroli is the cheapest solution for replacing open chamber boilers. Built to be installed outdoors in partially protected places and prepared for integration with a solar panel system. It has an excellent quality-price ratio and is entirely Made in Italy with a 2-year guarantee. The cheapest in its category Arrangement for solar systems Eco-comfort system for rapid domestic hot water production High efficiency low consumption circulator (class A) Ideal for residential homes up to 120 m2 2 Year Warranty Divaproject is a heat generator for heating and instant domestic hot water production. The series has been designed in each of its components to have top performance in its category while maintaining characteristics of simplicity and compactness. The control electronics allow for easy and functional combination with solar collector systems. The series includes two models: C24 and C30 The boiler is designed to operate on natural gas and LPG or even on propane air by means of a special transformation. The efficiency of Divaproject is the maximum for its category, certified at 3 stars according to the 92/42 EEC Directive for energy classification Components Expansion vessel Combustion chamber Copper primary exchanger Atmospheric burner Sanitary exchanger Modulating gas valve Motorized 3-way valve Boiler control Control panel and functions Divaproject's control and management electronics allow the user to customize the operation of the appliance in order to manage environmental comfort according to one's needs. The control panel with the adjustment knobs makes the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive Remote control "ROMEO" timer Divaproject boilers can be combined with a wide range of remote timer controls which allow the appliance to be adjusted and operated remotely. The ROMEO series consists of 4 models, respectively with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With ROMEO you can: Adjust the heating and DHW temperatures Know the operating status of the boiler View the temperatures inside and outside the house Restart the boiler in case of temporary lockout Program the daily or weekly environmental comfort Activate/deactivate the heating function via the telephone The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. With solar systems Sun Easy function Divaproject boilers have been designed to be easily inserted in systems made with the most recent technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously controls the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user Comfort and Safety Functions Eco-Comfort function In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Antifreeze function Even in stand-by mode, i.e. in the absence of a heat request, if a water temperature of 5°C is detected, it activates the anti-freeze protection by igniting the burner at minimum power, in order to avoid damage due to freezing. Post-circulation device All models are equipped with this particular timed device which allows, after the burner has been switched off in heating mode, to recover all the heat accumulated due to thermal inertia in the exchanger, transferring it to the radiators and therefore to the rooms to be heated Circulation anti-blocking device After 24 hours of inactivity, the boiler circulator is automatically started for about 5 seconds to prevent it from blocking after a long period of inactivity. Strengths > Compact geometry primary heat exchanger entirely in copper > Instant production of domestic hot water with dedicated plate exchanger > Simple and complete control panel, LED user interface > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system > Combustion chamber in anti-corrosion aluminized sheet, internally insulated with ecological fiber and burner in AISI 304 stainless steel > Can be combined with the modulating remote timer control > Casing painted white by anaphoresis with epoxy powders > Compact dimensions and low weight > Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor card > Adjustable post-circulation after the heating phase > ECO/COMFORT system for rapid production of domestic hot water > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > Standard by-pass Product Warranty : The warranty on this item is 24 months from the date of purchase.

Read more less