Technical features Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating max heat input kW 28.0 Nominal thermal power kW 27.0 Efficiency Pmax (80/60°C) % 103.5 Directive efficiency class 92/42 EEC **** Max. heating operating pressure bar 3 Heating pressure min. bars 0.8 Domestic hot water production: -Δt 25°C: 15.7 l/min -Δt 30°C: 13.0 l/min Sanitary working pressure Max: 9 bar Dimensions WxHxD mm 700x400x320 mm Power supply: LPG *NB: ALSO OPERATES ON LPG WITH THE USE OF A SPECIAL CONVERSION KIT TO BE REQUESTED FROM THE AUTHORIZED SERVICE CENTRE. General characteristics DIVACONDENS F28 D DIVACONDENS D is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes. ADVANTAGES Robust post-condenser powered by the closed circuit of the primary circuit, i.e. without the inlet of external mains water. The heat exchange with the fumes takes place inside large diameter water passages. Generator with simple and rational operation Condensate collection device to protect the air pressure switch, for regular combustion even in the presence of very cold external temperatures ECO function in DHW for greater savings in the period of low use of hot water Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems Place of installation: also for outdoors in a partially protected place down to -5°C as standard Certified operation also with propane air (50% air – 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center (max total price of 30 euros + VAT) Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available. THE BOILER CONTROL The control box of DIVACONDENS D consists of an easy to use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. MAIN COMPONENTS RECOVERY UNIT/HYDRAULIC DIAGRAMS FUME THERMOSTAT It preserves the integrity of the polypropylene pipes and, together with the air pressure switch, constitutes a double safety device for the evacuation system. OPTIMIZE COMFORT AND SAVINGS ROMEO TIMER (optional) The Romeo remote control allows control and setting of the boiler functions directly from the room in which it is installed. Comfort programming is possible on a weekly basis and also includes the 'holiday' function. Romeo is available with wired or wireless connection. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. HIGH EFFICIENCY CIRCULATOR EU regulation 622/2012 establishes that all boilers introduced on the market from 1 August 2015 must be equipped with a high-efficiency circulator (technically speaking, with an EEI, energy efficiency index ≤ 0.23). This decision was taken following the enormous energy consumption of all pumps and circulators installed in different applications in Europe. In practice, a high-efficiency circulator - incorporated in the boiler - reduces up to 30% of the total electricity consumption of the boiler itself. ONE CENT PER HOUR If we consider the maximum consumption of the pump mounted on the Divacondens D (0.04 kWh) compared to the previous circulator (0.085 kWh) we will save almost a euro cent for each hour of operation (electricity cost €0.19/kWh). Let's therefore multiply this tiny value by each hour of operation of the circulator in a year (for example 2,500 hours, for a moderately cold climate) ... €21.40 will be the annual saving if we replace an old boiler, and therefore also a old circulator, with Divacondens SUN EASY FUNCTION DIVACONDENS D boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and switches on the burner only if necessary. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, by exploiting and integrating even the smallest solar contribution, otherwise lost by mixing the thermostatic valves. FUNCTIONS ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied due to thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode. OPERATION IN SLIDING TEMPERATURE With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The electronic board of DIVACONDENS D adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite. Product Guarantee: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

FERROLI BLUEHELIX K 50 25 Kw CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Characteristics: Seasonal space heating energy efficiency class A Water heating energy efficiency class A Declared load profile XL Heat Capacity (PCI) Min / Max Heating: 5.8 / 25.0 Thermal power 80°C-60°C: 5.7 / 24.5 Useful thermal efficiency 80°C-60°C Pmax % / Pmin %: 98.0 / 97.8 Emission class Nox class 5 Boiler capacity 50 litres Domestic hot water production Δt 30°C l/10 min 175 Sanitary Manufacturing (EN 13203) ★★★ Heating working pressure Max bar 3 DHW working pressure Max bar 9 Empty weight kg 50 Dimensions HxWxD: 800 x 600 x 420 Power supply: METHANE Certified operation also with LPG using a special kit to be requested from the Authorized Assistance Centre CHARACTERISTICS Boiler body with the new patented primary exchanger in thick AISI 316 TI stainless steel Production of domestic hot water with 50-litre stainless steel domestic hot water storage tank Total premix burner in stainless steel Electronic flame modulation both in heating and DHW Digital control panel Can be combined with the modulating remote timer control Low consumption modulating heating pump (Erp Ready - Class A) Refined design and compact size Casing painted in white by anaphoresis with epoxy powders 3-star certified comfort in sanitary manufacturing according to EN 13203 Sliding temperature operation via optional external probe Digital flame control with three re-ignition attempts in case of operation due to lack of flame detection (methane model) Arrangement for recirculation attachments Standard by-pass Place of installation: also for outdoors in a partially protected place up to - 5 ° C as standard TANGIBLE FACTS max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh * Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure at max speed of high efficiency circulator: €11.4 Therefore, with the replacement of standard boilers with Bluehelix K 50, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W. The low-consumption circulator installed in the Bluehelix K 50 has a variable flow rate, with ΔT control. The advantages o ered are many, including: System start-up from cold: faster start-up with full control of the thermal load on the components Long-lasting maintenance of the temperature equilibrium conditions, once the set point has been reached Better operation in limit conditions (e.g. at minimum power), reduction of on-oFF states Reactivity to variations in the thermal load, an appreciable quality in multi-zone systems ..ROBUST Others are the merits attributable to the circulator chosen for Bluehelix K 50: The PWM signal (pulse width modulation) to the circulator allows extremely rapid intervention times to complete an advanced and complete electronic platform. This results in a drastic reduction of the ON-OFF events of the burner and the circulator. Electronic control of the drive torque at start up with consequent reduction of the risk of blocking. The routine anti-seize cycle is in any case carried out every 24 hours of inactivity. Self-protection function in case of overheating Less noise All this translates into greater longevity not only of the circulator, but also of the components subject to wear and tear from frequent on-off cycles. COMFORT AND SAFETY The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance. SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. ANTI-LEGIONELLA FUNCTION In order to keep the storage cylinder in suitable hygienic-sanitary conditions, the product electronics are able to keep it at a temperature of 65°C at programmable time intervals from one to seven days. ANTI-BLOCK FUNCTION In order to avoid blockage and consequent damage to the heating circulator and the three-way diverter valve, after a set period of inactivity, the boiler electronics activate operation for a few seconds. ANTIFREEZE FUNCTION In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. ECONOMY/COMFORT FUNCTION By activating the appropriate key, heating/temperature maintenance can be excluded by the user (Economy). This makes it possible to reduce fuel consumption during periods of non-use of domestic water Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance Technical features Model : Bluehelix Pro RRT 24 C Energy label specifications according to the European ErP directive Heating energy efficiency class: A Sanitary energy efficiency class XL profile: A NOx class : 6 Characteristics of heating/DHW operation: Heating Thermal Power: 20 kW Thermal Power in Sanitary: 24 kW Maximum Heating Power 80°C - 60°C : 20 kW Useful Thermal Efficiency 80°C - 60°C: 98.1% Useful Thermal Efficiency 50°C - 30°C : 106.1% Domestic hot water production Δt 30°C: 11.5 l/min Domestic hot water production Δt 25°C: 13.8 l/min Power supply: methane or LPG Dimensions and weight Extremely Compact Dimensions (HxWxD): 600x400x320 mm Weight : 29Kg Ferroli BLUEHELIX PRO RRT boiler Ecological wall-hung condensing boilers with Ferroli Thermobalance™ DUAL combustion cell .. Evolution Continues With attention to aesthetics and silence, it continues the tradition of appreciation of the previous "Bluehelix Pro" series. The range of generators is equipped with the tested primary heat exchanger for heating and domestic hot water in very thick stainless steel integrated in a single component, INOX DUAL . Designed and built according to the new ErP directives for eco-compatible design and labelling. BLUEHELIX PRO RRT achieves one of the highest energy efficiency in its category both in space heating, ηs 94% (Class A ErP, scale from G to A++), and in domestic water heating, ηwh 93% . Furthermore, when combined with the external probe and the Romeo remote timer control or the new Connect control, it reaches system energy class A+ (scale from G to A+++). Extended Warranty with the "5 Year Carefree" Formula The quality of BLUEHELIX PRO RRT is unquestionable, and Ferroli is ready to put it to the test by offering its customers an extended warranty coverage which also ensures periodic maintenance and legal checks The New Design for Comfort The particularly careful design of BLUEHELIX PRO RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort , so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. The planning also took care of the design, creating a precious mantle in 3 removable pieces , which descends to cover the connections of the pipes . PRO RRT Inside view Innovative Thermal Unit Ferroli ThermoBalance TM in its 5 Elements Ferroli has oriented the design of the combustion cell and the BLUEHELIX PRO RRT heat exchanger in order to maximize the functional advantages and the constructive sturdiness , as well as the simplicity of maintenance . The single-pipe design, both in the DHW and heating circuits, ensures that any air bubbles in the system do not get trapped in the exchanger, and makes it as easy as possible to clean it with chemical washing, unlike spiral exchangers with double parallel circuit (more common) in which if only one of the circuits is clogged, chemical washing is much more laborious 1. Exchanger: DUAL single-circuit stainless steel exchanger with high passages , resistant to clogging and easy to clean, capable of condensing even in sanitary production 2. Burner door : Self-cooled burner door without insulating panel 3. Burner : Exclusive special stainless steel hemispherical burner with long-life gasket 4. Gas Adaptive : Intelligent " Gas-adaptive " system derived from industrial boilers, which monitors and self-stabilises combustion as the gas + flue conditions vary 5. Fan : Offset fan, to facilitate maintenance of the boiler without disassembly. Integrated smoke anti-reflux clapper for connection to CCS (compliant with UNI 7129) The Combustion Cell Engine The tube that makes up the BLUEHELIX PRO RRT exchanger is made of stainless steel , a material that allows for the creation of an extremely smooth surface , therefore less susceptible to encrusting agents and deposits. Full Condensation The exchanger of the THERMOBALANCE™ DUAL thermal unit of Bluehelix PRO RRT is made using a concentric spiral without joints or welds. An additional pipe for the preparation of domestic hot water is inserted inside the main spiral, which serves the heating system. The latter is not bound to the main coil but remains immersed in the primary system fluid. The integration in a single block, both of the domestic hot water exchanger and of the primary one, reduces the average operating temperatures especially during the production of domestic hot water thus favoring the phenomenon of condensation. Therefore, unlike most of the products in its category, BLUEHELIX PRO RRT is able to condense even during the production of domestic hot water, reaching energy efficiencies among the highest not only in room heating (ηs 94%) but also in domestic water heating (ηwh 93%). The geometry of the exchanger, particularly generous in the useful passage sections both on the heating circuit and on the domestic hot water circuit, allows the exchanger of the THERMOBALANCE™ DUAL heating unit to operate almost at maximum design efficiency even in conditions of possible partial blockage. The serpentine conformation contrasts the deposit of impurities not only due to the regularity of the path crossed by the water, but also due to the "centrifugal" effect (SELF CLEANING) imprinted on the water itself on the walls of the serpentine. Furthermore, the absence of parallel circuits , both on the heating and DHW side, makes any chemical washing operations of the exchanger and the elimination of any air present in the system circuit extremely easy. Connect The new remote control New wireless remote control available as an accessory for home comfort management also from a smartphone using the connect app (iOS and Android) . Maximizes room comfort with delivery temperature modulation through the Room Climatic Compensation (CCA) and External Climatic Compensation (CCE) functions via the external temperature detectable directly from the internet (or from an optional external probe). It improves the average seasonal efficiency in space heating by +4%. External Climatic Compensation By reading the external temperature (from the internet or from the optional external probe) the system is able to vary the system temperature according to the external temperature measured on the basis of configurable climatic curves, thus guaranteeing the user maximum room comfort as the the external climatic conditions Environmental Compensation The modulating function of CONNECT allows modulation of the boiler power as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Panel Boiler Control , Commands and Functions The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs . The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the Romeo remote control. The card is protected by an easily accessible fuse thanks to the dedicated flap and the electrical connections benefit from a robust and large box, with easily accessible connectors and numerous cable ties. The boiler is also set up to connect a second room thermostat to the dedicated terminals to manage multi-zone mixing systems MC 2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC 2 : Multi Combustion Control , the new combustion system with patented gas-adaptive technology improves the adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) Easy Maintenance Hassle-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the THERMOBALANCETM DUAL heating unit allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels The electrical box of the electronic card can be easily extracted from the chassis and hooked laterally, leaving free access to the internal parts The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger unit The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-manifolded single-pipe circuit, both on the DHW and heating circuits The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections Simplified Replacement Flue outlet ø 50 mm The new boiler can also be installed with 50mm diameter ducting outlets. Particularly important in the replacement market in the frequent case of collective flues that require "heavy" ducting where it is necessary to have a high fume expulsion capacity even with reduced diameters Collective under pressure FPS: Fume Protection System. The flue clapet valve (installed as standard) allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard . For installers, the solution of the pressurized collective flue is more economical (reduction of of fireplaces) Comfort and Safety Functions The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance Stop and go function With the use of sanitary mixing taps, short or very short dispensing for quick rinses involve the start of the boiler ignition procedure which usually ends immediately. The continuation of these " false starts " can, in the long run, compromise the average life of the product. For this reason BLUEHELIX PRO RRT provides an electronic parameter through which it is possible to delay burner ignition (Stop and Go) by activating it only in the face of actual withdrawals of domestic hot water Sun Easy function BLUEHELIX PRO RRT has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter falls below the level necessary to guarantee optimal comfort for the user Self-Cleaning function The generous cross-section of the exchanger pipes , both on the plant and sanitary side, allows for a large passage of water . Furthermore, the "centrifugal" effect given to the water by the coil shape of the single-circuit exchanger generates a self-cleaning effect on the walls which counteracts the deposit of impurities . Finally, the absence of circuits in parallel, both on the heating and DHW sides, makes any chemical washing operations of the exchanger and the elimination of any air present in the system circuit extremely easy . Outdoor installation - Antifreeze function To make the most of the available space, the new BLUEHELIX PRO RRT 24C boiler can be installed recessed into the wall thanks to the special kit; for more critical installations, in completely uncovered places not protected from atmospheric agents, the "painted cabinet" kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost . This function is active with the boiler powered by the gas circuit and under electrical voltage Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. CERTIFIED OPERATION ALSO WITH LPG USING A SPECIAL KIT TO BE REQUESTED IN ADVANCE FROM THE AUTHORIZED SERVICE CENTER Ferroli Bluehelix Tech S 45 H gas condensing boiler for heating only cod. 0T2D5IWA complete with flue kit - new ErP ERP Class (Class G - A++) A Heat input (PCI) Min / Max Heating kW kW 7.5 / 43.0 - Thermal power 80°C-60°C Thermal power 80°C-60°C Thermal power 50°C-30°C 7.3 / 42.1 - 8.0 / 45.6 Useful thermal efficiency 80°C-60°C 98.0 / 97.8 Pmax % / Pmin % Heating working pressure Max / Min bar 4.5 / 0.8 Dimensions HxWxD mm 700x420x320 BLUEHELIX TECH S 45 H WALL CONDENSING BOILERS, HEATING ONLY > STRONG POINTS: - Boiler body with primary heat exchanger in thick stainless steel - Total premix burner in stainless steel - Digital control panel - Electronic flame modulation both in heating and DHW - Can be combined with the modulating remote timer control - Large backlit multifunction graphic display for easy and correct setting of the parameters - Standard by-pass - Exquisite design and compact size - Casing painted white by anaphoresis with epoxy powders > ADVANTAGES OF BLUEHELIX TECH 45 H: - ECO function in DHW for greater savings in the period of low use of hot water - Sliding temperature operation via optional external probe - Minimum polluting emissions (class 6 according to EN 15502-1) - Low consumption modulating heating pump (Erp Ready - Class A) - Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) - Free methane/LPG/propaneted air transformation during the initial product check and activation of the conventional guarantee, to be requested from the Authorized Assistance Center Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

FERROLI BLUEHELIX K 50 32 Kw LPG CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Product code: 20133714 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Heating/sanitary performance DHW nominal heat input kW 25.00 Sanitary nominal thermal power kW 26.25 Nominal heat input Heating kW 20.00 Nominal thermal power Heating (80°/60°) kW 19.48 Useful efficiency Pn max - Pn min (80°/60°): 97.4 - 97.1% Useful efficiency 30% Pn max (30th return): 108% Overall electric power (max heating/DHW power): 87/97 W Supply voltage V-Hz 230-50 IP X5D degree of protection Warm-up exercise Maximum pressure: 3 bars Minimum pressure for standard operation: 0.25-0.45 bar Heating H2O temperature selection range: 20/45 ÷ 40/80 °C Pump: maximum head available for the system: 390 mbar at a flow rate of 1,000 l/h Membrane expansion tank: 10 lt Sanitary exercise Max-min pressure: 0.15/8bar Quantity of hot water: - with Δt 25°C l/min 15.1 - with Δt 30° C l/min 12.5 - with Δt 35° C l/min 10.8 Minimum domestic water flow rate l/min 2 Sanitary H2O temperature selection range °C 37-60 Dimensions Dimensions (hxwxd) mm 740 x 470 x 275 ; 35 kgs NOx class: 6 Power supply: CNG/LPG Dedicated codes are no longer necessary in the case of LPG because the new Family is able to automatically adapt its operation to the type of fuel General characteristics New Family: the best ever: The new Family is the Riello solution for the most demanding user. The primary exchanger, entirely made of stainless steel, guarantees maximum efficiency and reliability over time and the new optimized sanitary exchanger ensures exceptional comfort and the best class of merit (class A). The new Family is available with powers of 25, 30 and 35 kW, in instantaneous combined and heating only versions. ACC self-adaptive electronic combustion control Range Rated Approval Possibility of integration in hybrid systems via integrated ModBus protocol New panel with color display and intelligent system filling function 10 liter expansion tank High head, low consumption modulating circulator Modulation ratio 1:8 Standard flue gas flange with dedicated flue system Clapet valve and SRD device as standard Standard thermoregulation in combination with the external probe, available as an accessory Possibility of recessed installation (model 25 KIS) and outdoors in partially protected places (IPX5D) Assembly template, hydraulic fittings, power supply cable and hole plug for interface remote control supplied Kit for REC10 remote control in supplied room Plumbing fittings with shut-off system taps, gas tap and cold water supplied Ease of installation and wide choice of accessories New primary exchanger in stainless steel Riello has always designed its products with care and dedication. Continuous improvement leads today to the evolution of the Family condensing range, starting from its primary element: the exchanger. The new Family exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. Access remains from the front, to facilitate maintenance operations. FAMILY IS AVAILABLE IN 3 POWER LEVELS, IN COMBINED (KIS) AND HEATING ONLY (IS) VERSIONS FAMILY 25 - KIS AND IS VERSION FAMILY 30 - KIS VERSION FAMILY 35 - KIS AND IS VERSION Dedicated codes are no longer necessary in the case of LPG because the new Family is able to automatically adapt its operation to the type of fuel. The characteristics of Family and its compact dimensions make it the ideal solution for both indoor and recessed installation (25 kW model) or outdoors in a partially protected place. Control panel and functions Even clearer, more intuitive and easier to use, it integrates elegantly into the aesthetics of the machine. The large backlit display, the raised keys and the interface enriched with explanatory texts and icons help the user and the installer in navigation. Through the panel it is possible to view the operating status, carry out the programming and access the regulation of the boiler and system. The RiCLOUD intelligent remote control allows you to manage the comfort of your home in a simple and intuitive way, even when you are away from home. Through the dedicated app it is in fact possible to check the status of the heating system, but also to program the boiler's switching on and off, temperature and operating times directly from your smartphone or tablet. It is possible to manage up to 8 different zones, each controlled by its own RiCLOUD. RiCLOUD can also be installed in total wireless mode using a radio frequency receiver, available as an accessory, thus avoiding any electrical or masonry intervention. Intelligent system loading Through the panel it is possible to independently carry out the filling of the system, if the pressure drops below the minimum reference value. Information display In addition to the date and time, the display shows the basic information relating to boiler operation: the water delivery temperature and the system pressure. Via an icon on the display, the boiler also warns of the need to carry out scheduled maintenance. Programming Programming boiler operation according to your needs is easy and intuitive. From the panel it is possible to carry out the hourly and daily programming for each zone of the system. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Bluehelix Pro 25C Energy label specifications according to the European ErP directive Heating energy efficiency class: A Sanitary energy efficiency class XL profile: A NOx class : 5 Characteristics of heating/DHW operation: Heating Thermal Power: 25 kW Thermal Power in Sanitary: 27 kW Maximum Heating Power 80°C - 60°C : 24.5 kW Useful Thermal Efficiency 80°C - 60°C: 98% Useful Thermal Efficiency 50°C - 30°C : 106% Domestic hot water production Δt 30°C: 12.9 l/min Domestic hot water production Δt 25°C: 15.5 l/min Energy certification (92/42 EEC): **** Degree of protection: IP X5D Power supply: LPG Dimensions and weight Extremely Compact Dimensions (HxWxD): 600x400x320 mm Weight : 29Kg Ferroli boiler BLUEHELIX PRO Wall-mounted condensing boilers, premixed sealed chamber with instantaneous domestic hot water production BLUEHELIX PRO has been designed to guarantee maximum energy efficiency and performance both in heating and in the supply of domestic hot water thanks to the new bivalent exchanger in Aisi 316 Ti stainless steel. Built to be installed outdoors in partially protected places and equipped with electronics capable of integrating with a solar panel system. New series of compact wall-mounted condensing boilers with instantaneous domestic hot water production This new exchanger integrates the heating circuit and the production of instantaneous domestic hot water in a single element, thus optimizing the phenomenon of condensation. Bluehelix Pro achieves one of the highest energy efficiency of space heating in its category: ηs 94% . Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+ . The Range Bluehelix Pro is available in 2 models, both running on methane and LPG. Both the 25C model and the larger size, 32C, offer large volumes of domestic hot water, quickly, which can be further reduced by activating the "Comfort" function PLUS Product > New bivalent primary exchanger in Aisi 316 Ti stainless steel with “SELFCLEANING” function > High yields in both heating and domestic hot water production > Total premix burner in stainless steel > Electronic flame modulation both in heating and DHW > Digital control panel , complete with hydrometer > Can be combined with the modulating remote timer control . Programmable for one second > High efficiency modulating heating circulator (Erp Ready - Class A) > Refined design and compact dimensions > Casing painted white by anaphoresis with epoxy powders > Ease of access to internal components for any maintenance > 3-star certified comfort in sanitary production according to EN 13203, amended by Reg. 812/2013 > Sliding temperature operation via optional external probe > Digital flame control with three re-ignition attempts in the event of blockage due to lack of flame detection (methane model) > Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems > Standard by-pass > Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit > IPX5D protection index, equivalent to excellent electrical protection of the boiler from liquids and foreign bodies > Achieves one of the highest seasonal space heating efficiency in its category: ηs 94% System energy class A+ , with the combination of the external probe and the Romeo modulating timer control Components The Exchanger The Ferroli design applied to the combined heat exchangers once again stood out for a simple and high-performance solution, made with the best materials Structure The exchanger consists of a concentric spiral without joints or welds. An additional pipe is inserted inside the main spiral - which serves the heating system - for the preparation of domestic hot water. The latter is not linked to the main coil, but remains immersed, in a "bain-marie" in the system fluid Self-Cleaning function The generous cross-section of the exchanger tubes allows for a free, ample passage of water. The serpentine conformation contrasts the deposit of impurities, not only due to the regularity of the path crossed by the water but also due to the "centrifugal" effect impressed on the water itself on the walls of the serpentine. Furthermore, the absence of circuits in parallel, both on the heating and DHW sides, makes any chemical washing operations of the exchanger and the elimination of any air present in the system circuit extremely easy. Full Condensation The integration of both the domestic hot water exchanger and the primary one in a single block reduces the average operating temperatures even during the production of domestic hot water. This favors condensation and gives the boiler high efficiency not only in heating, but also in domestic hot water Material The tube that makes up the Bluehelix Pro exchanger is made of AISI 316 ti stainless steel . It is a so-called austenitic alloy, particularly resistant to corrosion, enriched with the addition of titanium. it is also a material that allows for the creation of an extremely smooth surface, therefore less susceptible to encrusting agents and after-effects Cheap Plus . Ecological. Efficient. Self-Adaptive The low-consumption circulator installed in the Bluehelix Pro has a variable flow rate, with ΔT control. The advantages offered are many, including: • System start-up from cold: faster start-up with full control of the thermal load on the components • Permanent maintenance of the temperature equilibrium conditions, once the set point has been reached • Better operation in limit conditions, reduction of on-of states • Reactivity to variations in the thermal load, an appreciable quality in multi-zone systems Robust Others are the merits attributable to the circulator chosen for Bluehelix Pro: • The PWM signal (pulse width modulation) to the circulator allows extremely rapid intervention times to complete an advanced and complete electronic platform. This results in a drastic reduction of the ON-OFF events of the burner and the circulator • Electronic control of the drive torque at start up with consequent reduction of the risk of blocking. The routine anti-seize cycle is in any case carried out every 24 hours of inactivity • Self-protection function in case of overheating • Less noise All this translates into greater longevity not only of the circulator, but also of the components subject to wear and stress from frequent on-off cycles Panel Boiler Control , Commands and Functions The BLUEHELIX PRO control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs. The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Romeo Chronothermostat Remote Control The BLUEHELIX PRO boiler can be combined with a wide range of remote timer controls which allow the appliance to be adjusted and operated remotely. Comfort programming is on a weekly basis, even with a holiday function. Romeo is available with wired or wireless connection With the ROMEO Chronothermostat you can: • Adjust the heating and DHW temperatures • Know the operating status of the boiler • View the temperatures inside and outside the house • Restart the boiler in the event of a temporary block • Program the daily or weekly ambient comfort • Activate/deactivate the heating function via the telephone (dial not supplied) System energy class A+ in combination with the external probe and remote timer control The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Functions: ECO-COMFORT function: In COMFORT mode, thanks to the particular system for maintaining the temperature of the heat exchanger, the dispensing of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Sliding temperature operation: By installing the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. Antifreeze function: In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by freezing. This function is active with the boiler powered by the gas circuit and under electrical voltage. Sun Easy function: BLUEHELIX TECH has been designed to be easily inserted in systems made with the latest technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user. "SELF-CLEANING" function: Thanks to the "spiral" shape, the passage of domestic water inside the exchanger produces a "centrifugal" self-cleaning effect on the internal walls which tends to remove any limescale deposits. Tangible facts: Regulation 622/2012 provides that all boilers placed on the market from 1 August 2015 are equipped with a low-consumption circulator, otherwise defined as "class A". It is a decision that starts from the consideration of the enormous energy expenditure of the pumps and circulators installed in the various applications. In practice, i.e. by analyzing the impact of the low-consumption circulator integrated in the boiler, it reduces up to 30% of the total electricity consumption of the generator. max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure at max speed of high efficiency circulator: €11.4 Therefore, with the replacement of standard boilers with Bluehelix Pro, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. CERTIFIED OPERATION ALSO ON LPG USING THE SPECIAL KIT TO BE REQUESTED IN ADVANCE FROM THE AUTHORIZED SERVICE CENTER OF THE AREA NB: PRODUCT AVAILABLE ON ORDER Ferroli Floor Standing Boiler Bluehelix BS 45 kW for natural gas or LPG heating only complete with Fume Exhaust Kit 0TAD5AWA - New ErP Thermal power 80°C-60°C Min / Max Heating 7.3 / 42.1 Useful thermal efficiency 80°C-60°C 98.0 / 97.8 Emission class Nox class 6 Class A+ in heating BLUEHELIX B on base > STRONG POINTS: It achieves one of the highest seasonal space heating efficiency in its category: ηs 94% (mod. 35 only) in combination with the modulating remote control and the external probe (optional) it reaches the higher efficiency class A+ (scale from G to A+++) (mod. 35 only) Primary heat exchanger in stainless steel Total premix burner in stainless steel with wide modulation range Low consumption modulating heating pump (Erp Ready - Class A) Digital controls with user interface display, multifunctional for easy and correct parameter setting Can be combined with the modulating remote timer control Easily accessible water and gas connections to facilitate the replacement of old generators Fumes discharge with split or coaxial pipes; possibility of left and right side exit, rear > BENEFITS OF BLUEHELIX B: Minimum polluting emissions (class 6 according to EN 15502-1) Sliding temperature operation in combination with the optional external probe Protection function of the exchanger with Δt control Timed circulator anti-blocking Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (only in methane operation) Antifreeze function with standard protection down to -5°C Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

FERROLI BLUEHELIX K 50 32 Kw METHANE CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Characteristics: Seasonal space heating energy efficiency class A Water heating energy efficiency class A Declared load profile XXL Nominal thermal power 29 kW DHW thermal capacity 32 kW Auxiliary electricity consumption at full load: 0.054 kW Sound power level within 55 dB Dimensions (HxWxD) 800 x 600 x 420 *Certified operation also with LPG using a special kit to be requested from the Authorized Assistance Centre BLUEHELIX K50 32 EFFICIENCY, RATIONALITY AND ROBUSTNESS New series of condensing boilers with which FERROLI intends to satisfy the increasingly stringent limits on energy consumption required by recent regulations. The range of generators has been designed with the new patented AISI 316 TI stainless steel exchanger capable of guaranteeing energy efficiency and performance, both in heating and in the supply of domestic hot water, at the top of its category, in compliance with the new directives ErP for eco-friendly design and labelling. CHARACTERISTICS Boiler body with the new patented primary exchanger in thick AISI 316 TI stainless steel Production of domestic hot water with 50-litre stainless steel domestic hot water storage tank Total premix burner in stainless steel Electronic flame modulation both in heating and DHW Digital control panel Can be combined with the modulating remote timer control Low consumption modulating heating pump (Erp Ready - Class A) Refined design and compact size Casing painted in white by anaphoresis with epoxy powders 3-star certified comfort in sanitary manufacturing according to EN 13203 Sliding temperature operation via optional external probe Digital flame control with three re-ignition attempts in case of operation due to lack of flame detection (methane model) Arrangement for recirculation attachments Standard by-pass Place of installation: also for outdoors in a partially protected place up to - 5 ° C as standard TANGIBLE FACTS max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh * Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure at max speed of high efficiency circulator: €11.4 Therefore, with the replacement of standard boilers with Bluehelix K 50, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W. The low-consumption circulator installed in the Bluehelix K 50 has a variable flow rate, with ΔT control. The advantages o ered are many, including: - System start-up from cold: faster start-up with full control of the thermal load on the components - Permanent maintenance of temperature equilibrium conditions, once the set point has been reached - Better operation in extreme conditions (e.g. at minimum power), reduction of on-oFF states - Reactivity to variations in the thermal load, an appreciable quality in multi-zone systems ..ROBUST Others are the merits attributable to the circulator chosen for Bluehelix K 50: - The PWM signal (pulse width modulation) to the circulator allows extremely rapid intervention times to complete an advanced and complete electronic platform. This results in a drastic reduction of the ON-OFF events of the burner and the circulator. - Electronic control of the drive torque at start up with consequent reduction of the risk of blocking. The routine anti-seize cycle is in any case carried out every 24 hours of inactivity. - Self-protection function in case of overheating - Less noise All this translates into greater longevity not only of the circulator, but also of the components subject to wear and tear from frequent on-off cycles. COMFORT AND SAFETY The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance. > SLIDING TEMPERATURE OPERATION With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. > ANTI-LEGIONELLA FUNCTION In order to keep the storage cylinder in suitable hygienic-sanitary conditions, the product electronics are able to keep it at a temperature of 65°C at programmable time intervals from one to seven days. > ANTI-BLOCK FUNCTION In order to avoid blockage and consequent damage to the heating circulator and the three-way diverter valve, after a set period of inactivity, the boiler electronics activate operation for a few seconds. > ANTIFREEZE FUNCTION In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. > ECONOMY/COMFORT FUNCTION By activating the appropriate key, heating/temperature maintenance can be excluded by the user (Economy). This makes it possible to reduce fuel consumption during periods of non-use of domestic water Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ferroli condensing boiler Bluehelix Tech RRT 30 H Heating only METHANE OR LPG Complete with flue gas kit - New Technical features: ERP Class (Class G - A++) A Heating max / min heat input (Hs) kW 30.6 / 6.4 Max / min heat output heating (80/60°C) kW 30 / 6.3 Max / min heat output heating (50/30°C) kW 32.5 / 6.9 Efficiency Pmax / Pmin (80-60°C) (Hi) % 97.9 / 98.0 Efficiency Pmax / Pmin (50-30°C) (Hi) % 106.1 / 107.5 Efficiency 30% 109.5 Max / min heating pressure bar 3 / 0.8 Empty weight kg 28 No. of pieces/pallet no. 12 CNG/LPG CODE 0T3D2BWA STRENGTHS: With attention to aesthetics and silence, it continues the tradition of appreciation of the previous "Bluehelix" series Boiler with thick stainless steel primary exchanger, with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt. A+ System: in combination with the modulating remote control and the external probe (optional) it reaches the upper efficiency class A+ (scale from G to A+++) MC2: Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) MGR: Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits MGR: Methane: LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door: simplifies maintenance and reduces its cost thanks to fewer parts to replace Sanitary production in combination with storage tank (optional), standard 3-way valve in the boiler Hydraulic connections covered by the boiler casing Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass BENEFITS OF BLUEHELIX TECH RRT H: Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Minimum polluting emissions (class 6 according to EN 15502-1) Sliding temperature operation via optional external probe Low consumption modulating heating pump (ErP Ready - Class A) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the aid of the optional antifreeze heater kit Free methane/LPG/propaneted air transformation when checking the product and activating the warranty, to be requested from the Authorized Assistance Center The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. CERTIFIED OPERATION ALSO ON LPG USING THE SPECIAL KIT TO BE REQUESTED IN ADVANCE FROM THE AUTHORIZED SERVICE CENTER OF THE AREA Ferroli Floorstanding Boiler Bluehelix BK 50 30 kW Methane or LPG complete with Fume Exhaust Kit - New ErP Heating/DHW ERP class A Load profile XXL Thermal capacity (PCI) Min Risc. 6.7 KW Thermal capacity (PCI) Max Risc. 29.5 KW Thermal capacity (PCI) Max San. 32KW Useful thermal efficiency 80°c-60°c Pmax % 98.0 Emission class Nox class 5 Boiler capacity 50 litres Domestic hot water production Δt 30°cl/10 195 Heating working pressure Max bar 3 Max DHW operating pressure bar 9 BLUEHELIX BK 50 > EFFICIENCY, RATIONALITY AND ROBUSTNESS New series of condensing boilers with which FERROLI intends to satisfy the increasingly stringent limits on energy consumption required by recent regulations. The range of generators has been designed with the new AISI 316 TI stainless steel exchanger capable of guaranteeing energy efficiency and performance, both in heating and in the supply of domestic hot water, at the top of their category. The Bluehelix B floor-standing range achieves one of the highest energy efficiency of space heating in its category: ηs 94%. Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+. > PLUS PRODUCT COMPONENTS > Boiler body with the new primary exchanger in very thick Aisi 316 Ti stainless steel > Production of domestic hot water with stainless steel storage tank > Total premix burner in stainless steel > Electronic flame modulation both in heating and DHW > Digital control panel > Can be combined with the modulating remote timer control > Modulating heating pump > Refined design and compact dimensions > Casing painted white by anaphoresis with epoxy powders > 3-star certified comfort in sanitary manufacturing according to EN 13203 > Sliding temperature operation via optional external probe > Digital flame control with three re-ignition attempts in the event of blockage due to lack of flame detection > Arrangement for recirculation attachments > Standard by-pass > It achieves one of the highest seasonal space heating efficiency in its category: ηs 94% (excluding mod. BS 45) > System energy class A+, with the combination of the external probe and the Romeo modulating timer control > COMPONENTS OF THE EXCHANGER Ferroli has directed its research and design towards an exchanger that is simple and robust in its structure, using first-rate materials. STRUCTURE The exchanger consists of a simple spiral, without joints or welds. The generous section of the pipes allows a free, wide passage of the system fluid. The serpentine shape contrasts the deposit of impurities. The tube bundle is unique, without further parallel circuits. Since it is not a collector type exchanger, it is impossible for air bubbles to remain in the meanders of the circuits. Furthermore, any chemical washing of the boiler will take place effectively, as there is no possibility that the descaler pump pushes through a free circuit rather than a clogged one. > TANGIBLE FACTS max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh * Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure max speed high efficiency circulator: 19 € Therefore, with the replacement of standard boilers with Bluehelix, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W > COMFORT AND SAFETY The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance. > SLIDING TEMPERATURE With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. > ANTI-LEGIONELLA In order to keep the storage tank in suitable hygienic-sanitary conditions, the product electronics are able to keep it at a temperature of 65°C at programmable time intervals from one to seven days. > ANTI-LOCKING In order to avoid blockage and consequent damage to the heating circulator and the three-way diverter valve, after a set period of inactivity, the boiler electronics activate their operation for a few seconds. > ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. > ECONOMY/COMFORT By activating the appropriate key, heating/temperature maintenance can be excluded by the user (Economy). This makes it possible to reduce fuel consumption during periods of non-use of domestic water. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

FERROLI BLUEHELIX PRO S 32C KW GAS CONDENSING BOILER WITH METHANE OR LPG COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features Heating ERP class: A Healthcare ERP class: A Load profile: XL Heating capacity (PCI) Min / Max Heating 6.7/29.2/32 kW Heating power 80°C-60°C Min / Max Heating6.6/28.9/32 kW Useful thermal efficiency 80°C-60°C Pmax % / Pmin % 98.8/97.8 Useful thermal efficiency 30% load: 108.8% Domestic hot water production Δt 30°C/Δt 25°C: 15.3/18.3 l/min Heating working pressure Max / Min bar 3 / 0.8 Empty weight kg 31.5 Dimensions (HxWxD): 700x420x320 mm Certified operation also with LPG using a special kit to be requested from the Authorized Assistance Centre BLUEHELIX PRO S SMALL FOOTPRINT, GREAT PERFORMANCE ... FULL CONDENSATION BLUEHELIX PRO S has been designed to guarantee maximum energy efficiency and performance both in heating and in the supply of domestic hot water thanks to the new bivalent exchanger in Aisi 316 Ti stainless steel. This new exchanger integrates the heating circuit and the production of instantaneous domestic hot water in a single element, thus optimizing the phenomenon of condensation. The galvanized sheet casing, supplied separately from the boiler body, has been designed to facilitate access to the hydraulic connections and to allow the smoke ducts and air intake pipes to exit on each side of the same. Bluehelix Pro S achieves one of the highest energy efficiency of space heating in its category: ηs 94%. Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+. Strengths: It achieves one of the highest seasonal space heating efficiency in its category: ηs 94% A+ SYSTEM: in combination with the Romeo modulating remote timer control and the external probe Primary exchanger in thick Aisi 316 Ti stainless steel with integrated sanitary production (dual stainless steel exchanger) Total premix burner in stainless steel Digital control panel Electronic flame modulation both in heating and DHW Can be combined with the modulating remote timer control Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Advantages: Exchanger with "SELF-CLEANING" function which reduces limescale deposits inside the DHW circuit High yields both in heating and in sanitary production Ease of access to internal components for any maintenance ECO function in DHW for greater savings in the period of low use of hot water 3-star certified comfort in sanitary production according to EN 13203, amended by Reg. 812/2013 Sliding temperature operation via optional external probe Low consumption modulating heating pump (Erp Ready - Class A) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center (max total price of 30 euros + VAT) Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available. Functions: ECO-COMFORT function In COMFORT mode, thanks to the particular system for maintaining the temperature of the heat exchanger, the delivery of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Sliding temperature operation: With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. Antifreeze function In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. Sun Easy function BLUEHELIX PRO S has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user. Tangible facts: Regulation 622/2012 provides that all boilers placed on the market from 1 August 2015 are equipped with a low-consumption circulator, otherwise defined as "class A". It is a decision that starts from the consideration of the enormous energy expenditure of the pumps and circulators installed in the various applications. In practice, i.e. by analyzing the impact of the low-consumption circulator integrated in the boiler, it reduces up to 30% of the total electricity consumption of the generator. max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure max speed high efficiency circulator: 19 € Therefore, with the replacement of standard boilers with Bluehelix Pro S, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. .

Read more less