MIDEA Ducted Air Conditioner Inverter R32 36000 BTU MTI-36FNXD0 A++ three-phase - NEW Model: Indoor unit code: MTI-36FNXD0 Outdoor unit code: MOU-36FN8-QD0 Power; 36000 btu/h Energy efficiency: Cooling efficiency SEER: 6.1 SCOP coefficient of performance (Medium Season): 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Performance: Power Output in cooling: 10.4 kW Power Output in heating: 11.14 kW Power absorbed in cooling: 4060 W Power absorbed in heating: 2990 W Internal unit sound pressure (Min/Med/Max) (db(A)): 40-43-47 Internal unit sound power max db(A); 62 Characteristics: Three-phase power supply 380-415V 50Hz Refrigerant Pipes Liquid / Gas Line: mm 9.52 / 15.88 Dimensions and weight: Indoor Unit (LxWxH): 1360-774-249 mm ; 40.5 Kg Outdoor Unit (LxWxH): 946-410-810 mm; 81.5 Kg Midea Commercial R-32 The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» This change takes place years before the regulations impose the abolition of traditional refrigerants, testifying to the attention that Midea places on environmental sustainability. Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of installation The range of new Midea indoor units can be connected, in addition to the R32 outdoor units, also to the R410A etsrene units of the previous series, to the full advantage of management simplicity Ducted R-32 Midea Air Recovery Reversible The air intake duct can be moved from the rear of the product (standard configuration) to the lower part of the same, replacing it with a sheet metal panel. In this way it is possible to make the product suitable for any installation condition. Ducted Units A6 The new range of A6 ductable units is characterized by more compact dimensions than the previous versions (height starting from 210 mm) and by a greater pressure available for the fans, to the full advantage of installation simplicity. The products are also equipped with an innovative function for automatically setting the rotation speed of the fan which allows the system to automatically adapt its work according to the ducts connected to the unit. G2 filters supplied To facilitate installation, Midea ducted units are supplied as standard with a G2 flat filter and filter holder frame. Condensate Lifting Pump The Midea 4-way Cassette indoor units are equipped with a pump for lifting the condensate liquid which allows it to be discharged at a height of 600 mm above the tray. Air intake The air inlet is standard on the products: it can be connected to an inlet fan to introduce air into the return duct Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

MIDEA Ducted Air Conditioner Inverter R32 24000 BTU MTI-24FNXD0 A++ - NEW Model: Indoor unit code: MTI-24FNXD0 Outdoor unit code: MOU-24FN8-QD0 Power; 24000 btu/h Energy efficiency: Cooling efficiency SEER: 6.1 SCOP coefficient of performance (Medium Season): 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Performance: Power Output in cooling: 7.03 kW Power Output in heating: 7.6 kW Power absorbed in cooling: 2190 W Power absorbed in heating: 2040 W Indoor unit sound pressure (Min/Med/Max) (db(A)): 37-40-44 Internal unit sound power max db(A); 63 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Pipes Liquid / Gas Line: mm 9.52 / 15.88 Dimensions and weight: Indoor Unit (LxWxH): 1100-774-249 mm ; 31.5Kg Outdoor Unit (LxWxH): 845-363-702 mm; 66.8Kg Midea Commercial R-32 The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» This change takes place years before the regulations impose the abolition of traditional refrigerants, testifying to the attention that Midea places on environmental sustainability. Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of installation The range of new Midea indoor units can be connected, in addition to the R32 outdoor units, also to the R410A etsrene units of the previous series, to the full advantage of management simplicity Ducted R-32 Midea Air Recovery Reversible The air intake duct can be moved from the rear of the product (standard configuration) to the lower part of the same, replacing it with a sheet metal panel. In this way it is possible to make the product suitable for any installation condition. Ducted Units A6 The new range of A6 ductable units is characterized by more compact dimensions than the previous versions (height starting from 210 mm) and by a greater pressure available for the fans, to the full advantage of installation simplicity. The products are also equipped with an innovative function for automatically setting the rotation speed of the fan which allows the system to automatically adapt its work according to the ducts connected to the unit. G2 filters supplied To facilitate installation, Midea ducted units are supplied as standard with a G2 flat filter and filter holder frame. Condensate Lifting Pump The Midea 4-way Cassette indoor units are equipped with a pump for lifting the condensate liquid which allows it to be discharged at a height of 600 mm above the tray. Air intake The air inlet is standard on the products: it can be connected to an inlet fan to introduce air into the return duct Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Model: Indoor unit code: MTBE-70 Outdoor unit code: MOUE-70K Technology: 3D DC INVERTER Power: 24000 btu/h Energy efficiency: Cooling efficiency SEER: 6.1 SCOP coefficient of performance: 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Performance: Power Output in cooling: 7.03 kW Power Output in heating: 7.03 kW Power absorbed in cooling: 2285 W Power absorbed in heating: 1900 W Air Flow (Max / Med / Min) (m3/min): 16.2-20.0-22.7 Indoor unit Sound Pressure (Max / Med / Min) (db(A)): 46/42/38 Internal unit sound power max db(A); 62 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 9.5(3/8") / 15.9(5/8") Operating Limit Temperature: -15 Dimensions and weight: Indoor Unit (LxWxH): 920x635x270 mm ; 28 kgs Outdoor Unit (LxDxH): 845x363x702 mm ; 48 kgs To view more product information CLICK HERE General characteristics Single Ducted Indoor Units Flexible air return Rear air inlet is standard, while bottom air inlet is optional. The dimension of the bottom plate and the back flange are the same, so it is easy for the installer to change the air inlet from the back to the bottom Integrated drain pump The drain pump, capable of lifting the condensed water up to 750mm, is standard for both the 4-Way Cassette and the Ducted units. Twin combination Some types of indoor units can be installed in "Twin" mode: a single outdoor unit can connect to two indoor units, expanding the scenario of possible installations. Available in combinations: 18k+18k, 24k+24k, 30k+30k. to air-condition Server Rooms and/or technical rooms. Fresh air intake The "Air Fresh" intake is standard, it is easy to connect it to the external air passage hole.maintenance and assistance Series features: Gas Leak Alarm : In the event that careless installation of the system should cause micro-leaks of refrigerant gas, the system displays a specific alarm signal. Self-diagnosis A performance monitoring system allows Midea air conditioners to diagnose any malfunctions and failures. Technical rooms air conditioning A special technology allows all Midea Splits to be able to operate in "cooling" mode even with external temperatures down to -15°. Ideal for air conditioning Server Rooms and/or technical rooms. Outdoor Unit Heating Tape A PTC heating tape mounted on the base plate of the outdoor unit prevents rain, water or snow from accumulating, ensuring safer operation. Follow me Midea remote controls are equipped with a temperature sensor, which the unit considers as "ambient temperature". The air conditioner therefore works by "following" the real temperature perceived by the user. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

MIDEA Ducted Air Conditioner Inverter R32 48000 BTU MTI-48FNXD0 A++ three-phase - NEW Model: Indoor unit code: MTI-48FNXD0 Outdoor unit code: MOU-48FN8-QD0 Power; 48000 btu/h Performance: Power Output in cooling: 14.0 kW Power Output in heating: 16.02 kW Power absorbed in cooling: 5150 W Power absorbed in heating: 4260 W Indoor unit sound pressure (Min/Med/Max) (db(A)): 48-50-51 Internal unit sound power max db(A); 69 Characteristics: Three-phase power supply 380-415V 50Hz Refrigerant Pipes Liquid / Gas Line: mm 9.52 / 15.88 Dimensions and weight: Indoor Unit (LxWxH): 1200-874-300 mm ; 47.6 Kgs Outdoor Unit (LxWxH): 952-410-1333 mm; 106.7 Kgs Midea Commercial R-32 The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» This change takes place years before the regulations impose the abolition of traditional refrigerants, testifying to the attention that Midea places on environmental sustainability. Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of installation The range of new Midea indoor units can be connected, in addition to the R32 outdoor units, also to the R410A etsrene units of the previous series, to the full advantage of management simplicity Ducted R-32 Midea Air Recovery Reversible The air intake duct can be moved from the rear of the product (standard configuration) to the lower part of the same, replacing it with a sheet metal panel. In this way it is possible to make the product suitable for any installation condition. Ducted Units A6 The new range of A6 ductable units is characterized by more compact dimensions than the previous versions (height starting from 210 mm) and by a greater pressure available for the fans, to the full advantage of installation simplicity. The products are also equipped with an innovative function for automatically setting the rotation speed of the fan which allows the system to automatically adapt its work according to the ducts connected to the unit. G2 filters supplied To facilitate installation, Midea ducted units are supplied as standard with a G2 flat filter and filter holder frame. Condensate Lifting Pump The Midea 4-way Cassette indoor units are equipped with a pump for lifting the condensate liquid which allows it to be discharged at a height of 600 mm above the tray. Air intake The air inlet is standard on the products: it can be connected to an inlet fan to introduce air into the return duct Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Model: Indoor unit code: MTBE-88 Outdoor unit code: MOUE-88K Technology: 3D DC INVERTER Power: 30000 btu/h Energy efficiency: Cooling efficiency SEER: 6.1 SCOP coefficient of performance: 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Performance: Power Output in cooling: 7.9 kW Power Output in heating: 9.38 kW Power absorbed in cooling: 2875 W Power absorbed in heating: 2460 W Air Flow (Max / Med / Min) (m3/min): 18.3-23.3-26.3 Indoor unit Sound Pressure (Max / Med / Min) (db(A)): 50/48/44 Internal unit sound power max db(A); 65 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 9.5(3/8") / 15.9(5/8") Operating Limit Temperature: -15 Dimensions and weight: Indoor Unit (LxWxH): 1140x775x270 mm ; 35 kgs Outdoor Unit (LxWxH): 946x410x810 mm; 62 kgs To view more product information CLICK HERE General characteristics Single Ducted Indoor Units Flexible air return Rear air inlet is standard, while bottom air inlet is optional. The dimension of the bottom plate and the back flange are the same, so it is easy for the installer to change the air inlet from the back to the bottom Integrated drain pump The drain pump, capable of lifting the condensed water up to 750mm, is standard for both the 4-Way Cassette and the Ducted units. Twin combination Some types of indoor units can be installed in "Twin" mode: a single outdoor unit can connect to two indoor units, expanding the scenario of possible installations. Available in combinations: 18k+18k, 24k+24k, 30k+30k. to air-condition Server Rooms and/or technical rooms. Fresh air intake The "Air Fresh" intake is standard, it is easy to connect it to the external air passage hole.maintenance and assistance Series features: Gas Leak Alarm : In the event that careless installation of the system should cause micro-leaks of refrigerant gas, the system displays a specific alarm signal. Self-diagnosis A performance monitoring system allows Midea air conditioners to diagnose any malfunctions and failures. Technical rooms air conditioning A special technology allows all Midea Splits to be able to operate in "cooling" mode even with external temperatures down to -15°. Ideal for air conditioning Server Rooms and/or technical rooms. Outdoor Unit Heating Tape A PTC heating tape mounted on the base plate of the outdoor unit prevents rain, water or snow from accumulating, ensuring safer operation. Follow me Midea remote controls are equipped with a temperature sensor, which the unit considers as "ambient temperature". The air conditioner therefore works by "following" the real temperature perceived by the user. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less