Technical features Indoor Units 1) Model Internal Unit Catalog Code: 3x ADT26UX4RBL4 Power: 9000 btu/h Cooling Capacity : 2.7 kW Heating Capacity : 2.74 kW Absorption : 20W Rated Current : 0.2A Treated Air: 8.33 m 3 /min Sound pressure level : 27~32 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 910×190×447 mm Indoor Unit Weight: 18 Kg Optional Wi-Fi Card ( Code AEH-W4E1 ) Optional Motorized Grid ( Code DP-BA-02 ) 2) Model Internal Unit Catalog Code: 1x ADT52UX4RCL4 Power: 18000 btu/h Cooling Capacity : 5.3 kW Heating Capacity : 5.8 kW Absorption : 87 W Rated Current : 0.5A Treated Air : 15 m 3 /min Sound Pressure Level : 33~41 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 12.70 mm (1/2") Internal Unit Dimensions (WxHxD): 1180×190×447 mm Indoor Unit Weight: 22.5 Kg Optional Wi-Fi Card ( Code AEH-W4E1 ) Optional Motorized Grid ( Code DP-BA-02 ) Outdoor Unit Model: External Unit catalog code: 4AMW105U4RAA Max indoor units: up to 4 indoor units Energy efficiency: SEER : 6.50 SCOP: 4.01 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 538 kWh/a Annual energy consumption in Heating : 2793 kWh/a Performance: Cooling Capacity: 10 kW Heating Capacity: 11 kW Std cooling absorption: 3.1 kW Std heating absorption: 2.8 kW Sound power level : 68 dB(A) Sound pressure level : 54~60 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 48°C - Heating: -15° ~ 24° C Installation Data: Pipe diameter Liquid : 6.35 mm (1/4") x4 Gas pipe diameter : 9.52 mm (3/8") x4 Maximum piping length: 60 m Maximum difference in height indoor unit / outdoor unit: 15 m Dimensions: External Unit Dimensions (WxHxD): 950×840×340 mm Weight of Outdoor Unit: 73 Kg 3 year warranty (5 on the compressor) The Hisense Italia warranty can be activated within 1 month from the date of purchase at the addresshttp://www.hisenseitalia.it/clima/supporto Multisplit Outdoor Unit Technologies High Efficiency Twin Rotary DC Inverter Compressor The design of the new dual rotor BLDC Inverter compressor ensures better balancing and reduced vibrations. This translates into the maximum level of silence and excellent performance in terms of efficiency and energy saving. DC drive technology with 180° sine wave The system constantly monitors the compressor frequency and creates the most efficient waveform to determine effective consumption savings. Curve control Compressor with rubidium magnet Thanks to the greater compression of the gas molecules, the rubidium magnet compressor guarantees greater efficiency and lower absorption Electronic expansion valve The outdoor unit uses an electronic expansion valve that regulates and optimizes the refrigerant amount of all operating indoor units. Operation with wide voltage range The outdoor unit can work with voltage from 176V to 264V. In the new models, the use of an automatic voltage regulation technique ensures that the protection value adjusts according to it, keeping the operating frequency at an optimal value. Exchanger design: designed to improve its efficiency The design of the external exchanger was designed to increase the heat transfer in order to make the refrigeration circuit more efficient and avoid the creation of blocks of ice. Another advantage is that it can support long-distance connections between outdoor units and indoor units without reducing the cooling capacity. Ducted Hisense R-32 Variable static pressure On the whole range of ductable models it is possible to set the static pressure to ensure greater installation flexibility. Double air inlet mode Advantages: If the distance between the unit and the wall is limited, then you can choose the bottom air inlet by removing the bottom frame of the unit, it will be much easier and more flexible. The noise level produced by a bottom air inlet can increase up to 5dB compared to using a rear air inlet. We therefore recommend opting for the latter solution. ON/OFF contact for hotel room control , ON/OFF contact for fire control Slim design With a height of 190 mm, it can be easily installed in residential suspended ceilings. Built-in rear drain pan Disadvantage of an external drain pan: It easily attracts dust and bacteria which will cause malfunction in the long run. Float and integrated condensate drain pump If the level of condensation water inside the drain pan should increase due to a malfunction of the drain pump, the unit will automatically switch off and display the alarm to avoid damage. Security protection Make sure that the compressor operates in safety mode to avoid damages caused by refrigerant leaks. 3D Air Panel (Optional) A motorized grill can be installed on ductable models from 2.6 to 5.2 kW Characteristics Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less