ATTENZIONE SARÀ FORNITA SOLO L'UNITÀ ESTERNA Caratteristiche tecniche Codice catalogo unità esterna : MU3R19.U21 Numero di unità interne collegabili : 3 Efficienza energetica SEER : 7,2 SCOP : 4,2 Classe di efficienza energetica raffreddamento : A++ Classe di efficienza energetica riscaldamento : A+ Consumo energetico annuo in raffreddamento : 258 kWh/a Consumo energetico annuo in riscaldamento : 1696 kWh/a Performance Capacità raffreddamento : 5,3 kW Capacità riscaldamento : 6,3 kW Assorbimento in raffreddamento : 1,3 kW  Assorbimento in riscaldamento: 1,5 kW Livello potenza sonora : 64 dB(A) Livello pressione sonora : 50~52 dB(A) Dati elettrici Alimentazione (V/Hz/Φ) : 220~240/50/1      Gas refrigerante : R-32 Range temperature garantito: - Raffreddamento: -15° ~ 48° C - Riscaldamento: -18° ~ 18° C Dati installativi Diametro tubi liquido : 6,35 mm (1/4") x3 Diametro tubi gas : 9,52 mm (3/8") x3 Lunghezza massima tubazioni : 50 m Lunghezza massima tubazioni per unità : 25 m Dislivello massimo tra unità interna e unità esterna : 15 m Dimensioni e peso Dimensioni unità esterna (LxAxP) : 870x655x320 mm Peso unità esterna : 45,0 Kg Multisplit LG Con i sistemi Multi Split LG, non hai bisogno di acquistare più unità esterne per climatizzare tutte le stanze della tua casa. Ti basta installare una sola unità per avere il clima ottimale in 9 ambienti diversi. Compressore BLDC (Brushless Direct Current Motor) Le unità esterne della gamma Multi sono equipaggiate con compressori BLDC dotati di motori con magneti al neodimio. Questi compressori sono caratterizzati da efficienza energetica superiore rispetto a quella dei tradizionali compressori Inverter, ed operano in maniera ottimale ad ogni condizione di rotazione. Questo garantisce elevati valori di efficienza energetica stagionale. Smart Load Control Risparmio energetico in fase di avvio   Scegliendo la funzione Smart Load Control tramite i micro-interruttori dell’unità esterna, le temperature del refrigerante sugli scambiatori di calore vengono modificate automaticamente in base alla temperatura esterna e alla temperatura impostata per i locali. Durante i primi 30 minuti di funzionamento, è possibile raggiungere un risparmio energetico fino al 35% rispetto a prodotti tradizionali, migliorando anche il livello di comfort percepito. Questa funzione permette di mantenere il consumo elettrico massimo dell’unità esterna entro un limite prestabilito, per evitare il distacco automatico del contatore o per limitare l’assorbimento. Risparmio energetico in fase di operatività   Dopo 30 minuti dall’avvio in modalità Smart Load Control, l’unità esterna continua a modificare la temperatura del refrigerate in funzione del carico termico.   Scambiatore di calore Wide Louver   Sulle unità esterne è applicato lo scambiatore di calore con alette Wide Louver. La particolare lavorazione di tali alette permette di migliorare notevolmente la capacità di scambio del radiatore rispetto ad uno scambiatore tradizionale   Ampio intervallo operativo   Le unità esterne della gamma Multi Pipe possono operare in modalità raffreddamento e riscaldamento alle condizioni più estreme. La presenza quale dotazione di serie del controllo di condensazione per la modalità raffreddamento le rende compatibili con tutte le applicazioni in cui è necessario rinfrescare l’aria anche a temperature esterne ridotte (Es. ristoranti, palestre, locali server).  Funzionamento a controllo di pressione   Le nuove unità della gamma Multi tubazione multipla operano con un controllo basato sulle pressioni del refrigerante nel circuito: questo tipo di controllo assicura una miglior gestione delle periferiche contenute nelle unità rispetto ai tradizionali controlli di temperatura. Questo meccanismo di controllo è più preciso e raffinato, senza essere negativamente influenzato dalle variazioni di temperatura esterna. La nuova tecnologia applicata a questi prodotti permette di ottenere i risultati desiderati in tempi più brevi, di meglio gestire il funzionamento del compressore alle condizioni di carico parziale, e di realizzare importanti riduzioni della corrente elettrica assorbita.  Modalità Stand-by   Questa funzione permette di rimuovere l’alimentazione elettrica alle componenti del sistema durante la fase di stand-by dell’impianto. In questo modo, i consumi elettrici di stand-by delle unità esterne Multi a tubazione multipla risultano inferiori del 90% rispetto alle versioni precedenti. Modalità riduzione rumori Grazie ad una serie di impostazioni applicabili alle unità tramite la scheda elettronica, è possibile ridurre la rumorosità delle unità esterne nelle ore notturne, a vantaggio del comfort e della vivibilità dei complessi residenziali. L’adozione di una nuova griglia di protezione dei ventilatori e l’utilizzo di ventole con particolari specificatamente progettati per l’ottimizzazione aerodinamica hanno permesso una riduzione del livello di rumorosità delle unità esterne nell’ordine di circa 2 dB(A) alle condizioni nominali di rilevazione.Unità leggere e compatteLe unità esterne LG della gamma Multi sono state progettate e realizzate con un design razionale e ridotto nelle dimensioni e un pesoinferiore se comparato con quello delle precedenti unità. Ciò le rende maneggevoli e semplici da installare. Garanzia prodotto: Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

SOLO UNITA' ESTERNA Condizionatore LG R-32 9000 btu unità esterna UU09W Modello: Codice catalogo Unità Esterna :  UU09W Livello rumorosità (dB(A)): 47-50 Lunghezza/Profondità (cm):    28,8 Larghezza (cm):    77,0 Altezza (cm):    54,5 Peso (kg):    33,0 Potenza freddo (kW):    2,8 Potenza caldo (kW):    3,2 Gas refrigerante:    R32 Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Model: Catalog code : MU4R27.U40 Gases : R-32 Power (V/Hz/Φ) : 1220~240-50 Max indoor units that can be combined: 4 Energy efficiency: SEERS: 8.00 SCOP: 4.20 Energy Efficiency Class (Cool) : A++ Energy Efficiency Class (Heating) : A+ Performance: Cooling Capacity (kW):7.91 Heating Capacity (kW) :9.09 Operating limits: Cool Min~Max °C -10~48 Heating Min~Max °C -18~18 Dimensions and weight: Outdoor Unit WxHxD (mm): 950 x 834 x 330; 60.7kg Height difference: UI-UE (Max) m 15; IU-UI (Max) m 7.5 Diameter Connection pipes: - Liquid: Ø6.35 (1/4) x 4 - Gas: Ø9.56 (3/8) x 4 Single branch length (Max): m 25 Total piping length: 70 General characteristics With LG Multi Split systems, you don't need to buy multiple outdoor units to air-condition all the rooms in your home. All you need to do is install one unit to have the optimal climate in 9 different environments . BLDC Compressor (Brushless Direct Current Motor) The outdoor units of the Multi range are equipped with BLDC compressors equipped with motors with neodymium magnets. These compressors are characterized by higher energy efficiency than traditional inverter compressors, and operate optimally in all rotation conditions. This guarantees high seasonal energy efficiency values. Smart Load Control Energy saving at startup By choosing the Smart Load Control function via the micro-switches of the outdoor unit, the temperatures of the refrigerant on the heat exchangers are changed automatically according to the outdoor temperature and the temperature set for the rooms. During the first 30 minutes of operation, it is possible to achieve energy savings of up to 35% compared to traditional products, also improving the level of perceived comfort. This function allows you to keep the maximum electrical consumption of the outdoor unit within a pre-set limit, to avoid automatic disconnection of the meter or to limit absorption. Energy saving during operation After 30 minutes from starting in Smart Load Control mode, the outdoor unit continues to change the chiller temperature according to the thermal load. Wide Louver heat exchanger The Wide Louver fin heat exchanger is applied to the outdoor units. The particular processing of these fins allows to considerably improve the exchange capacity of the radiator compared to a traditional exchanger Wide operating range The outdoor units of the Multi Pipe range can operate in cooling and heating mode under the most extreme conditions. The presence as standard equipment of the condensation control for the cooling mode makes them compatible with all applications where it is necessary to refresh the air even at low external temperatures (e.g. restaurants, gyms, server rooms). Pressure controlled operation The new units in the Multi-pipe range operate with control based on the pressure of the refrigerant in the circuit: this type of control ensures better management of the peripherals contained in the units compared to traditional temperature controls. This control mechanism is more precise and refined, without being negatively affected by external temperature variations. The new technology applied to these products makes it possible to obtain the desired results in shorter times, to better manage the operation of the compressor under partial load conditions, and to achieve significant reductions in the electrical current absorbed. Stand-by mode This function allows you to remove the power supply to the system components during the stand-by phase of the system. In this way, the stand-by electricity consumption of the multi-pipe Multi outdoor units is 90% lower than the previous versions. Noise reduction mode Thanks to a series of settings applicable to the units via the electronic card, it is possible to reduce the noise level of the outdoor units during the night, to the advantage of the comfort and livability of residential complexes. The adoption of a new fan protection grille and the use of fans with details specifically designed for aerodynamic optimization have allowed a reduction in the noise level of the outdoor units in the order of about 2 dB(A) at nominal conditions of detection. Lightweight and compact units The LG outdoor units of the Multi range have been designed and built with a rational design and reduced in size and weight lower when compared with that of the previous units. This makes them easy to handle and easy to install. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

LG Outdoor Unit MultiSplit Motor MU4R25.U40 Trial Split (4 connections) R-32 Model: Catalog code : MU4R25.U40 Gases : R-32 Power (V/Hz/Φ) : 1220~240-50 Max indoor units that can be combined: 4 Energy efficiency: SEER: 8.20 SCOP: 4.20 Energy Efficiency Class (Cool) : A++ Energy Efficiency Class (Heating) : A+ Performance: Cooling Capacity (kW): 4.82 Heating Capacity (kW): 4.01 Operating limits: Cool Min~Max °C -10~48 Heating Min~Max °C -18~18 Dimensions and weight: Outdoor Unit WxHxD (mm): 950 x 834 x 330; 60.7kg Height difference: UI-UE (Max) m 15; IU-UI (Max) m 7.5 Diameter Connection pipes: - Liquid: Ø6.35 (1/4) x 4 - Gas: Ø9.56 (3/8) x 4 Single branch length (Max): m 25 Total piping length: 70 General characteristics With LG Multi Split systems, you don't need to buy multiple outdoor units to air-condition all the rooms in your home. All you need to do is install one unit to have the optimal climate in 9 different environments . BLDC Compressor (Brushless Direct Current Motor) The outdoor units of the Multi range are equipped with BLDC compressors equipped with motors with neodymium magnets. These compressors are characterized by higher energy efficiency than traditional inverter compressors, and operate optimally in all rotation conditions. This guarantees high seasonal energy efficiency values. Smart Load Control Energy saving at startup By choosing the Smart Load Control function via the micro-switches of the outdoor unit, the temperatures of the refrigerant on the heat exchangers are changed automatically according to the outdoor temperature and the temperature set for the rooms. During the first 30 minutes of operation, it is possible to achieve energy savings of up to 35% compared to traditional products, also improving the level of perceived comfort. This function allows you to keep the maximum electrical consumption of the outdoor unit within a pre-set limit, to avoid automatic disconnection of the meter or to limit absorption. Energy saving during operation After 30 minutes from starting in Smart Load Control mode, the outdoor unit continues to change the chiller temperature according to the thermal load. Wide Louver heat exchanger The Wide Louver fin heat exchanger is applied to the outdoor units. The particular processing of these fins allows to considerably improve the exchange capacity of the radiator compared to a traditional exchanger Wide operating range The outdoor units of the Multi Pipe range can operate in cooling and heating mode under the most extreme conditions. The presence as standard equipment of the condensation control for the cooling mode makes them compatible with all applications where it is necessary to refresh the air even at low external temperatures (e.g. restaurants, gyms, server rooms). Pressure controlled operation The new units in the Multi-pipe range operate with control based on the pressure of the refrigerant in the circuit: this type of control ensures better management of the peripherals contained in the units compared to traditional temperature controls. This control mechanism is more precise and refined, without being negatively affected by external temperature variations. The new technology applied to these products makes it possible to obtain the desired results in shorter times, to better manage the operation of the compressor under partial load conditions, and to achieve significant reductions in the electrical current absorbed. Stand-by mode This function allows you to remove the power supply to the system components during the stand-by phase of the system. In this way, the stand-by electricity consumption of the multi-pipe Multi outdoor units is 90% lower than the previous versions. Noise reduction mode Thanks to a series of settings applicable to the units via the electronic card, it is possible to reduce the noise level of the outdoor units during the night, to the advantage of the comfort and livability of residential complexes. The adoption of a new fan protection grille and the use of fans with details specifically designed for aerodynamic optimization have allowed a reduction in the noise level of the outdoor units in the order of about 2 dB(A) at nominal conditions of detection. Lightweight and compact units The LG outdoor units of the Multi range have been designed and built with a rational design and reduced in size and weight lower when compared with that of the previous units. This makes them easy to handle and easy to install. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor Unit catalog code: MU5R30 U40 Max indoor units: up to 5 indoor units Energy efficiency: SEER : 8.20 (W/W) SCOP : 4.20 (W/W) Cooling Energy Efficiency Class: A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 376 kWh/a Annual energy consumption in Heating : 2467 kWh/a Performance: Cooling Capacity: 8.79 kW Heating Capacity: 10.10 kW Std cooling absorption: 2.0 kW Std heating absorption: 2.15 kW Sound power level : 66 dB(A) Sound pressure level : 50~54dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Pipe diameter Liquid : 6.35 mm (1/4") x5 Gas pipe diameter : 9.52 mm (3/8") x5 Maximum piping length: 75 m Maximum height difference Indoor Unit and Outdoor Unit: 15 m Guaranteed temperature range: - Cooling: -10° ~ 48°C - Heating: -18° ~ 18°C Dimensions: External Unit Dimensions (WxHxD): 950x834x330 mm Weight of Outdoor Unit: 61.3 Kg Dual Inverter compressor guaranteed for 10 years   LG, which places great faith in the quality and reliability of its products, offers a 10-year warranty on the Inverter compressor of all mono and multi-split models featured in this catalogue. The warranty mentioned above covers the costs of the Inverter compressor only for a total period of 10 years from the date of purchase of the air conditioner. Any other cost other than the value of the replaced component alone is to be considered excluded from coverage. LG Multisplit Outdoor Unit With LG Multi Split systems, you don't need to buy multiple outdoor units to air-condition all the rooms in your home. All you need to do is install one unit to have the optimal climate in 9 different environments . BLDC Compressor (Brushless Direct Current Motor) The outdoor units of the Multi range are equipped with BLDC compressors equipped with motors with neodymium magnets. These compressors are characterized by higher energy efficiency than traditional inverter compressors, and operate optimally in all rotation conditions. This guarantees high seasonal energy efficiency values. Smart Load Control  Energy saving at startup By choosing the Smart Load Control function via the micro-switches of the outdoor unit, the temperatures of the refrigerant on the heat exchangers are changed automatically according to the outdoor temperature and the temperature set for the rooms. During the first 30 minutes of operation, it is possible to achieve energy savings of up to 35% compared to traditional products, also improving the level of perceived comfort. This function allows you to keep the maximum electrical consumption of the outdoor unit within a pre-set limit, to avoid automatic disconnection of the meter or to limit absorption. Energy saving during operation After 30 minutes from starting in Smart Load Control mode, the outdoor unit continues to change the chiller temperature according to the heat load. Wide Louver heat exchanger The Wide Louver fin heat exchanger is applied to the outdoor units. The particular processing of these fins allows to considerably improve the exchange capacity of the radiator compared to a traditional exchanger Wide operating range The outdoor units of the Multi Pipe range can operate in cooling and heating mode under the most extreme conditions. The presence as standard equipment of the condensation control for the cooling mode makes them compatible with all applications where it is necessary to refresh the air even at low external temperatures (e.g. restaurants, gyms, server rooms). Pressure controlled operation The new units in the Multi-pipe range operate with control based on the pressure of the refrigerant in the circuit: this type of control ensures better management of the peripherals contained in the units compared to traditional temperature controls. This control mechanism is more precise and refined, without being negatively affected by external temperature variations. The new technology applied to these products makes it possible to obtain the desired results in shorter times, to better manage the operation of the compressor under partial load conditions, and to achieve significant reductions in the electrical current absorbed. Stand-by mode This function allows you to remove the power supply to the system components during the stand-by phase of the system. In this way, the stand-by electricity consumption of the multi-pipe Multi outdoor units is 90% lower than the previous versions. Noise reduction mode Thanks to a series of settings applicable to the units via the electronic card, it is possible to reduce the noise level of the outdoor units during the night, to the advantage of the comfort and livability of residential complexes. The adoption of a new fan protection grille and the use of fans with details specifically designed for aerodynamic optimization have allowed a reduction in the noise level of the outdoor units in the order of about 2 dB(A) at nominal conditions of detection. Lightweight and compact units The LG outdoor units of the Multi range have been designed and built with a rational design and reduced in size and weight lower when compared with that of the previous units. This makes them easy to handle and easy to install. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

LG Outdoor Unit MultiSplit Motor MU2R17.UL0 Dual Split (2 connections) R-32 Model: Catalog code : MU2R17 UL0 Gases : R-32 Power (V/Hz/Φ) : 1220~240-50 Max indoor units that can be combined: 2 Energy efficiency: SEER: 7.80 SCOP: 4.20 Energy Efficiency Class (Cool) : A++ Energy Efficiency Class (Heating) : A+ Performance: Cooling Capacity (kW): 3.75 Heating capacity (kW): 4.22 Operating limits: Cool Min~Max °C -10~48 Heating Min~Max °C -18~18 Dimensions and weight: Outdoor Unit WxHxD (mm): 770 x 545 x 288; 35.9kg Height difference: UI-UE (Max) m 15; IU-UI (Max) m 7.5 Diameter Connection pipes: - Liquid: Ø6.35 (1/4) x 2 - Gas: Ø9.56 (3/8) x 2 Single branch length (Max): m 20 Total piping length: 30 General characteristics With LG Multi Split systems, you don't need to buy multiple outdoor units to air-condition all the rooms in your home. All you need to do is install one unit to have the optimal climate in 9 different environments . BLDC Compressor (Brushless Direct Current Motor) The outdoor units of the Multi range are equipped with BLDC compressors equipped with motors with neodymium magnets. These compressors are characterized by higher energy efficiency than traditional inverter compressors, and operate optimally in all rotation conditions. This guarantees high seasonal energy efficiency values. Smart Load Control Energy saving at startup By choosing the Smart Load Control function via the micro-switches of the outdoor unit, the temperatures of the refrigerant on the heat exchangers are changed automatically according to the outdoor temperature and the temperature set for the rooms. During the first 30 minutes of operation, it is possible to achieve energy savings of up to 35% compared to traditional products, also improving the level of perceived comfort. This function allows you to keep the maximum electrical consumption of the outdoor unit within a pre-set limit, to avoid automatic disconnection of the meter or to limit absorption. Energy saving during operation After 30 minutes from starting in Smart Load Control mode, the outdoor unit continues to change the chiller temperature according to the thermal load. Wide Louver heat exchanger The Wide Louver fin heat exchanger is applied to the outdoor units. The particular processing of these fins allows to considerably improve the exchange capacity of the radiator compared to a traditional exchanger Wide operating range The outdoor units of the Multi Pipe range can operate in cooling and heating mode under the most extreme conditions. The presence as standard equipment of the condensation control for the cooling mode makes them compatible with all applications where it is necessary to refresh the air even at low external temperatures (e.g. restaurants, gyms, server rooms). Pressure controlled operation The new units in the Multi-pipe range operate with control based on the pressure of the refrigerant in the circuit: this type of control ensures better management of the peripherals contained in the units compared to traditional temperature controls. This control mechanism is more precise and refined, without being negatively affected by external temperature variations. The new technology applied to these products makes it possible to obtain the desired results in shorter times, to better manage the operation of the compressor under partial load conditions, and to achieve significant reductions in the electrical current absorbed. Stand-by mode This function allows you to remove the power supply to the system components during the stand-by phase of the system. In this way, the stand-by electricity consumption of the multi-pipe Multi outdoor units is 90% lower than the previous versions. Noise reduction mode Thanks to a series of settings applicable to the units via the electronic card, it is possible to reduce the noise level of the outdoor units during the night, to the advantage of the comfort and livability of residential complexes. The adoption of a new fan protection grille and the use of fans with details specifically designed for aerodynamic optimization have allowed a reduction in the noise level of the outdoor units in the order of about 2 dB(A) at nominal conditions of detection. Lightweight and compact units The LG outdoor units of the Multi range have been designed and built with a rational design and reduced in size and weight lower when compared with that of the previous units. This makes them easy to handle and easy to install. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

LG Outdoor Unit MultiSplit Motor MU3R21.UE0 Trial Split (3 connections) R-32 Model: Catalog code : MU3R21.UE0 Gases : R-32 Power (V/Hz/Φ) : 1220~240-50 Max indoor units that can be combined: 3 Energy efficiency: SEER: 8.50 SCOP: 4.21 Energy Efficiency Class (Cool) : A+++ Energy Efficiency Class (Heating) : A+ Performance: Cooling Capacity (kW): 4.27 Heating capacity (kW): 4.42 Operating limits: Cool Min~Max °C -10~48 Heating Min~Max °C -18~18 Dimensions and weight: Outdoor Unit WxHxD (mm): 870 x 655 x 320; 43.8kg Height difference: UI-UE (Max) m 15; IU-UI (Max) m 7.5 Diameter Connection pipes: - Liquid: Ø6.35 (1/4) x 3 - Gas: Ø9.56 (3/8) x 3 Single branch length (Max): m 25 Total piping length: 50 General characteristics With LG Multi Split systems, you don't need to buy multiple outdoor units to air-condition all the rooms in your home. All you need to do is install one unit to have the optimal climate in 9 different environments . BLDC Compressor (Brushless Direct Current Motor) The outdoor units of the Multi range are equipped with BLDC compressors equipped with motors with neodymium magnets. These compressors are characterized by higher energy efficiency than traditional inverter compressors, and operate optimally in all rotation conditions. This guarantees high seasonal energy efficiency values. Smart Load Control Energy saving at startup By choosing the Smart Load Control function via the micro-switches of the outdoor unit, the temperatures of the refrigerant on the heat exchangers are changed automatically according to the outdoor temperature and the temperature set for the rooms. During the first 30 minutes of operation, it is possible to achieve energy savings of up to 35% compared to traditional products, also improving the level of perceived comfort. This function allows you to keep the maximum electrical consumption of the outdoor unit within a pre-set limit, to avoid automatic disconnection of the meter or to limit absorption. Energy saving during operation After 30 minutes from starting in Smart Load Control mode, the outdoor unit continues to change the chiller temperature according to the heat load. Wide Louver heat exchanger The Wide Louver fin heat exchanger is applied to the outdoor units. The particular processing of these fins allows to considerably improve the exchange capacity of the radiator compared to a traditional exchanger Wide operating range The outdoor units of the Multi Pipe range can operate in cooling and heating mode under the most extreme conditions. The presence as standard equipment of the condensation control for the cooling mode makes them compatible with all applications where it is necessary to refresh the air even at low external temperatures (e.g. restaurants, gyms, server rooms). Pressure controlled operation The new units in the Multi-pipe range operate with control based on the pressure of the refrigerant in the circuit: this type of control ensures better management of the peripherals contained in the units compared to traditional temperature controls. This control mechanism is more precise and refined, without being negatively affected by external temperature variations. The new technology applied to these products makes it possible to obtain the desired results in shorter times, to better manage the operation of the compressor under partial load conditions, and to achieve significant reductions in the electrical current absorbed. Stand-by mode This function allows you to remove the power supply to the system components during the stand-by phase of the system. In this way, the stand-by electricity consumption of the multi-pipe Multi outdoor units is 90% lower than the previous versions. Noise reduction mode Thanks to a series of settings applicable to the units via the electronic card, it is possible to reduce the noise level of the outdoor units during the night, to the advantage of the comfort and livability of residential complexes. The adoption of a new fan protection grille and the use of fans with details specifically designed for aerodynamic optimization have allowed a reduction in the noise level of the outdoor units in the order of about 2 dB(A) at nominal conditions of detection. Lightweight and compact units The LG outdoor units of the Multi range have been designed and built with a rational design and reduced in size and weight lower when compared with that of the previous units. This makes them easy to handle and easy to install. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

LG Outdoor Unit MultiSplit Motor MU2R15.UL0 Dual Split (2 connections) R-32 Model: Catalog code : MU2R15 UL0 Gases : R-32 Power (V/Hz/Φ) : 1220~240-50 Max indoor units that can be combined: 2 Energy efficiency: SEER: 8.50 SCOP: 4.20 Energy Efficiency Class (Cool) : A+++ Energy Efficiency Class (Heating) : A+ Performance: Cooling Capacity (kW): 4.14 Heating capacity (kW): 4.38 Operating limits: Cool Min~Max °C -10~48 Heating Min~Max °C -18~18 Dimensions and weight: Outdoor Unit WxHxD (mm): 770 x 545 x 288; 35.9kg Height difference: UI-UE (Max) m 15; IU-UI (Max) m 7.5 Diameter Connection pipes: - Liquid: Ø6.35 (1/4) x 2 - Gas: Ø9.56 (3/8) x 2 Single branch length (Max): 7.5 m Total piping length: 30 General characteristics With LG Multi Split systems, you don't need to buy multiple outdoor units to air-condition all the rooms in your home. All you need to do is install one unit to have the optimal climate in 9 different environments . BLDC Compressor (Brushless Direct Current Motor) The outdoor units of the Multi range are equipped with BLDC compressors equipped with motors with neodymium magnets. These compressors are characterized by higher energy efficiency than traditional inverter compressors, and operate optimally in all rotation conditions. This guarantees high seasonal energy efficiency values. Smart Load Control Energy saving at startup By choosing the Smart Load Control function via the micro-switches of the outdoor unit, the temperatures of the refrigerant on the heat exchangers are changed automatically according to the outdoor temperature and the temperature set for the rooms. During the first 30 minutes of operation, it is possible to achieve energy savings of up to 35% compared to traditional products, also improving the level of perceived comfort. This function allows you to keep the maximum electrical consumption of the outdoor unit within a pre-set limit, to avoid automatic disconnection of the meter or to limit absorption. Energy saving during operation After 30 minutes from starting in Smart Load Control mode, the outdoor unit continues to change the chiller temperature according to the heat load. Wide Louver heat exchanger The Wide Louver fin heat exchanger is applied to the outdoor units. The particular processing of these fins allows to considerably improve the exchange capacity of the radiator compared to a traditional exchanger Wide operating range The outdoor units of the Multi Pipe range can operate in cooling and heating mode under the most extreme conditions. The presence as standard equipment of the condensation control for the cooling mode makes them compatible with all applications where it is necessary to refresh the air even at low external temperatures (e.g. restaurants, gyms, server rooms). Pressure controlled operation The new units in the Multi-pipe range operate with control based on the pressure of the refrigerant in the circuit: this type of control ensures better management of the peripherals contained in the units compared to traditional temperature controls. This control mechanism is more precise and refined, without being negatively affected by external temperature variations. The new technology applied to these products makes it possible to obtain the desired results in shorter times, to better manage the operation of the compressor under partial load conditions, and to achieve significant reductions in the electrical current absorbed. Stand-by mode This function allows you to remove the power supply to the system components during the stand-by phase of the system. In this way, the stand-by electricity consumption of the multi-pipe Multi outdoor units is 90% lower than the previous versions. Noise reduction mode Thanks to a series of settings applicable to the units via the electronic card, it is possible to reduce the noise level of the outdoor units during the night, to the advantage of the comfort and livability of residential complexes. The adoption of a new fan protection grille and the use of fans with details specifically designed for aerodynamic optimization have allowed a reduction in the noise level of the outdoor units in the order of about 2 dB(A) at nominal conditions of detection. Lightweight and compact units The LG outdoor units of the Multi range have been designed and built with a rational design and reduced in size and weight lower when compared with that of the previous units. This makes them easy to handle and easy to install. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less