Technical features 1) Model Model: Mission Pro MSMBAU-09HRFN8 Power: 9000 btu/h Wi-Fi Optional : CE-SK 102 code Performance: Cooling Capacity (kW): 2.60 Heating capacity (kW): 2.80 Air Flow (Min-Med-Max) m3/h 240-380-440 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-31-39 Sound power (Hi) dB(A) 55 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Dimensions (LPA) mm 810-200-300 ; 8.3kg 2) Model: Model: Mission Pro MSMBCU-18HRFN8 Power: 18000 btu/h Wi-Fi Optional : CE-SK 102 code Performance: Cooling Capacity (kW): 5.30 Heating Capacity (kW): 5.50 Air Flow (Min-Med-Max) m3/h 500-580-750 Sound pressure (Silent-Min-Med-Max) dB(A) 21-24-33-42 Sound power (Hi) dB(A) 58 Dimensions: Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 12.7mm (1/2”) Indoor Unit (LPA) mm 980-225-325 ; 10.7kg Outdoor Unit Model: Catalog number: M2O-18FN8-Q Gases: R-32 Max indoor units that can be combined: 2 Power (V/Hz/Φ) : 220~240/50/1 Capacity: - Cooling down Nominal Capacity kW: 5.40 Absorbed power (Max): W 1790 SEER Seasonal energy efficiency: 6.3 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 300 - Heating Nominal Capacity kW: 5.60 Absorbed power (Max): W 1490 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1690 Performance: Outdoor Unit Air Flow: m3/h 2200 External Unit Sound Pressure Max (dB(A)): 56 Sound power (Max) dB(A): 64 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxDxH) (mm): 800x333x555 ; 36 kgs Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP Index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA MISSION PRO The geometries used for the splits of the MISSION PRO range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Superior Performance Inverter 4 The exclusive QuattroTM Inverter technology allows excellent performance in all conditions of use, making the Midea Inverter compressor one of the best AC compressors in the world. In all conditions, Midea Inverter compressors work powerfully, efficiently, quickly and constantly Maximum efficiency - The step-less linear modulation of the compressor makes it possible to adapt the rotation speed, and therefore the capacity supplied, to the environmental conditions in an extremely precise manner. The compressor perfectly adapts its rotation speed to the needs of the system without waste and with maximum efficiency. Linear regulation - The internal fan speed is user selectable in a linear fashion between 1% and 100% instead of being available in 4 or 5 levels. In this way it is possible to make the product deliver the most congenial air flow to your needs, for maximum comfort. Less Noise - The speed of the external fan adapts to the external temperature conditions and to the working modes of the product, to ensure less noise and maximum efficiency Better Comfort - The temperature that can be set on the products is managed at intervals of 0.5°C. In this way it is possible to find the most correct temperature setting for your well-being. Do Not Disturb function By pressing a button on the remote control it is possible to silence all acoustic alarms, turn off the display of the indoor unit and reduce the speed of the indoor fan to a rotation speed lower than the minimum, normally selectable iECO function This function allows you to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode GEAR function The Mission PRO units are equipped with the Gear function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. The display of the internal unit is able to show, in addition to the selected temperature, also the room temperature and the instantaneous electrical power absorbed during operation Follow me function Select this function and the special sensor located in the infrared control will detect the ambient temperature around you, and then adjust the operation of the air conditioner according to your needs Other features of the series Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. Integrated Midea Smart Kit The indoor units of the MISSION-PRO series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Wi-Fi Control (Optional) Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Indoor Units 1) Model Indoor Unit Catalog Code: 1x MSMABU-09HRDN8 Power : 9000 Btu Cooling Capacity: 2.64 kW Heating Capacity: : 2.93 kW Air flow: 8.3 m 3 /min Sound pressure level : 22 ~ 28 ~ 34 ~ 38 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 805x282x205 mm Indoor Unit Weight: 7.9 Kg Wi-Fi Optional : CE-SK 103 code 2) Model Indoor Unit Catalog Code : 1x MSMABU-12HRDN8 Power : 12000 Btu Cooling Capacity: 3.52 kW Heating Capacity: : 3.81 kW Air flow: 7.7 m 3 /min Sound pressure level : 21 ~ 26 ~ 30 ~ 36 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 805x282x205 mm Indoor Unit Weight: 7.9 Kg Wi-Fi Optional : CE-SK 103 code Outdoor Unit External Unit Catalog Code: M2OD-18HFN8-Q Connectable Indoor Units : 2 Energy efficiency: SEER : 6.1 SCOP : 4 Energy Efficiency Class (Cooling) : A++ Energy Efficiency Class (Heating) : A+ Annual energy consumption Cooling/Heating : 304/1537 kWh/a Performance: Cooling Capacity: 5.28 kW Heating Capacity: 5.57 kW Std Cooling Absorption : 1630 W Std Heating Absorption: 1500 W Sound power level : 65 dB(A) Sound pressure level : 56 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Dimensions: External Unit Dimensions (WxHxD): 800x554x333 mm Weight of Outdoor Unit: 35.5 Kg Midea Right The design of the Right range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Control your climate with your voice The Right series air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Remote Control (Smart Kit) The indoor units can be equipped with Midea Smart Kit (optional) in order to be controlled remotely via the Midea AIR app wherever you are supercool The First series uses high-frequency start-up technology, capable of generating a very high flow of fresh air in an extremely short time (about 30 seconds). Hassle-free installation • Long piping length and height difference • Sturdy installation plate suitable for application on pre-arrangement boxes • Up to 10 minutes of time saved with each installation Simple connection The space between the wall and the body is very large and allows you to house the pipes in a comfortable and simple way. The solidity of the fixing hooks of the chassis to the plate guarantees perfect adhesion of the product to the wall. Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Speed ​​linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values ​​1-100%. Sophisticated design The design of the Right range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENTION ! Offer valid until stocks last Technical features Indoor Units Model Internal Unit Catalog Code: 2x MA2-09NXD0-I Power : 9000 Btu Cooling Capacity: 2.64 kW Heating Capacity: : 2.93 kW Air flow: 7.7 m 3 /min Sound pressure level : 21~26~30~36dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 805x285x205 mm Indoor Unit Weight: 7.9 Kg Outdoor Unit External Unit Catalog Code: M2OD-18HFN8-Q Connectable Indoor Units : 2 Energy efficiency: SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 304 kWh/a Annual energy consumption in Heating : 1537 kWh/a Performance: Cooling Capacity: 5.28 kW Heating Capacity: 5.57 kW Cooling Absorption: 1630 W Heating absorption: 1500 W Sound power level : 65 dB(A) Sound pressure level : 56 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Maximum piping length: 25 m Maximum height difference Indoor Unit / Outdoor Unit: 15 m Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Dimensions: External Unit Dimensions (WxHxD): 800x554x333 mm Weight of Outdoor Unit: 35.5 Kg Midea PRIME Sophisticated design The design of the First range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Hassle-free installation • Long piping length and height difference • Sturdy installation plate suitable for application on pre-arrangement boxes • Up to 10 minutes of time saved with each installation Simple connection The space between the wall and the body is very large and allows you to house the pipes in a comfortable and simple way. The solidity of the fixing hooks of the chassis to the plate guarantees perfect adhesion of the product to the wall. Speed ​​linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values ​​1-100%. Gear function The GEAR function allows you to adjust the maximum rotation speed of the compressor by limiting its capacity to 75% and 50% of the nominal value, improving efficiency supercool The First series uses high-frequency start-up technology, capable of generating a very high flow of fresh air in an extremely short time (about 30 seconds). Follow me The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a precise reading even when changing rooms. Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENTION ! Offer valid until stocks last Technical features Indoor Units Model Internal Unit Catalog Code: 2x MA2-12NXD0-I Power : 12000 Btu Cooling Capacity: 3.52 kW Heating Capacity: : 3.81 kW Air flow: 8.3 m 3 /min Sound Power Level : 53 dB(A) Sound pressure level : 22~28~34~38dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 805x285x205 mm Indoor Unit Weight: 7.9 Kg Outdoor Unit External Unit Catalog Code: M2OD-18HFN8-Q Connectable Indoor Units : 2 Energy efficiency: SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 304 kWh/a Annual energy consumption in Heating : 1537 kWh/a Performance: Cooling Capacity: 5.28 kW Heating Capacity: 5.57 kW Cooling Absorption: 1630 W Heating absorption: 1500 W Sound power level : 65 dB(A) Sound pressure level : 56 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Maximum piping length: 25 m Maximum height difference Indoor Unit / Outdoor Unit: 15 m Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Dimensions: External Unit Dimensions (WxHxD): 800x554x333 mm Weight of Outdoor Unit: 35.5 Kg Midea PRIME Sophisticated design The design of the First range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Hassle-free installation • Long piping length and height difference • Sturdy installation plate suitable for application on pre-arrangement boxes • Up to 10 minutes of time saved with each installation Simple connection The space between the wall and the body is very large and allows you to house the pipes in a comfortable and simple way. The solidity of the fixing hooks of the chassis to the plate guarantees perfect adhesion of the product to the wall. Speed ​​linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values ​​1-100%. Gear function The GEAR function allows you to adjust the maximum rotation speed of the compressor by limiting its capacity to 75% and 50% of the nominal value, improving efficiency supercool The First series uses high-frequency start-up technology, capable of generating a very high flow of fresh air in an extremely short time (about 30 seconds). Follow me The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a precise reading even when changing rooms. Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

IN THE ABSENCE OF THE PRODUCT THE NEXT BREEZELESS+ MODEL WILL BE SHIPPED Technical features Indoor Units 1) Model Model: Ultimate Comfort MSMTAU-09HRFN Power: 9000 btu/h Performance: Cooling Capacity (kW): 2.60 Heating capacity (kW): 2.80 Air Flow (Min-Med-Max) m3/h 4.0-6.2-8.3 Sound pressure (Silent-Min-Med-Max) dB(A) 18-24-30-39.5 Sound power (Hi) dB(A) 54 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Dimensions (LPA) mm 886-188-315 ; 10.3kg 2) Model: Model: Ultimate Comfort MSMTAU-12HRFN8 Power: 12000 btu/h Performance: Cooling Capacity (kW): 3.50 Heating capacity (kW): 3.80 Air Flow (Min-Med-Max) m3/h 6.3-8.0-10.0 Sound pressure (Silent-Min-Med-Max) dB(A) 19.5-26-32-40.5 Sound power (Hi) dB(A) 54 Dimensions: Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Internal Unit (LPA) mm 886-188-315 ; 10.3kg Outdoor Unit Model: Catalog number: M2O-18FN8-Q Gases: R-32 Max indoor units that can be combined: 2 Power (V/Hz/Φ) : 220~240/50/1 Capacity: Cooling down Nominal Capacity kW: 5.20 Absorbed power (Max): W 1750 SEER Seasonal energy efficiency: 6.3 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 289 Heating Nominal Capacity kW: 5.50 Absorbed power (Max): W 1450 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1680 Performance: Outdoor Unit Air Flow: m3/h 2200 External Unit Sound Pressure Max (dB(A)): 56 Sound power (Max) dB(A): 64 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxDxH) (mm): 800x333x555 ; 36 kgs Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit. Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability. High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP Index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA Ultimate Comfort Ultimate Comfort by Midea represents the extreme evolution of domestic air conditioning systems: thanks to the exclusive Silky Cool technology, in fact, the air flow emitted by the air conditioner is channeled through hundreds of tiny holes, which transform the "classic" jet of air, often the cause of stiff necks and colds, in a delicate and pleasant flow. The result for the user? All the comfort of a Midea air conditioning system without the inconvenience caused by a continuous jet of air on our body. In fact, sheltered from direct air flows, the Ultimate Comfort air conditioning will be particularly comfortable even in those situations in which one stays for a prolonged period of time in the immediate vicinity of the split, during sleep (thanks also to a "record" ” of only 18 dB ), or again for those particularly delicate subjects such as children and the elderly. All without affecting the diffusion of cold and/or heat: on the contrary, Ultimate Comfort guarantees air propagated at angles much higher than those allowed by traditional air conditioners. Vertically, the new Midea air conditioner reaches an angle of 110° (against the 80° of the more common products) which rises to 120° (against 90°) horizontally: the air thus arrives more uniformly even in the most remote points of the room , bringing benefits to every corner of the house. Air flow management An air flow that can be freely adjusted, thanks to the possibility of controlling the direction of the air flow via the remote control, both on the vertical and on the horizontal axis. All for maximum comfort at 360°. Inverter Quattro technology The new Ultimate Comfort air conditioner, thanks to the exclusive Inverter Quattro technology , allows an intelligent and modulated use of energy resources, with minimum electricity consumption guaranteed by class A++/A++, while ensuring excellent performance and "top of the range" functions: from possibility of cooling the house despite external temperatures of 60°C, up to the instant cooling function, which thanks to the use of a high-frequency compressor satisfies any immediate cooling needs of the rooms of the house Air quality Midea air conditioners are designed to guarantee you an enveloping freshness and air quality that is always at the top. Equipped with self-cleaning technology, which allows for simplified maintenance, the Ultimate Comfort air conditioner also stands out for its Air Magic filtration system , which in addition to eliminating microbes and other harmful substances, offers all the advantages of ionisation, which intercepts and eliminates bacteria present suspended in the air, in order to make it not only fresh and/or warm, but also healthy, thus helping to contain any allergies to dust, pollen and other inhalable substances. All obviously controllable remotely via the Midea Air App installed on your smartphone, which allows you to take advantage of additional functions such as the weekly programming of the desired temperatures, as well as to monitor the daily, weekly and monthly consumption of Ultimate Comfort. Equipped with an intelligent sensor, Ultimate Comfort also guarantees control of the humidity level of the environment: in fact, the desired degree of humidity can be set, in a range between 30% and 90%. Integrated Wi-Fi control Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely. Series features: Self-diagnosis In the event of a breakdown, a fault code system allows users to report defects in a simple and clear way in order to quickly activate the assistance service Four inverters The quattro inverter technology consists in the adoption of linear regulation systems of the speed of the internal fan (selectable between 1% and 100%) of regulation of the temperature required in the room in units of 0.5 °C and of linear step-less modulation of outdoor unit compressor and fan. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. GEAR function The Ultimate Comfort units are equipped with the GEAR function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. Integrated Midea Smart Kit The indoor units of the Ultimate Comfort series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Do Not Disturb function By pressing a button on the remote control it is possible to silence all the audible alarms, turn off the display of the internal unit and reduce the speed of the internal fan to a rotation speed lower than the minimum, normally selectable. Condensation control The Ultimate Comfort units can work in cooling mode even with a low outside temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical Features Internal Units Model Internal Unit Catalog Code: 2x MSMABU-09HRDN8 Power: 9000 Btu Cooling Capacity : 2.64 kW Heating capacity: : 2.93 kW Air flow: 8.3 m3 /min Sound pressure level : 22 ~ 28 ~ 34 ~ 38 dB(A) Liquid Pipe Diameter: 6.35mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 805x282x205 mm Internal Unit Weight: 7.9 Kg Wi-Fi Optional: Code CE-SK 103 External Unit External Unit Catalog Code: M2OD-18HFN8-Q Connectable Internal Units: 2 Energy Efficiency: SEER : 6.1 SCOPE : 4 Energy Efficiency Class (Cooling): A++ Energy Efficiency Class (Heating): A+ Annual energy consumption Cooling/Heating : 304/1537 kWh/a Performance: Cooling Capacity : 5.28 kW Heating capacity: 5.57 kW Std Cooling Power Consumption: 1630 W Std Heating Absorption: 1500 W Sound power level: 65 dB(A) Sound pressure level: 56 dB(A) Characteristics: Power supply (V/Hz/Φ) : 220~240/50/1 Refrigerant gas: R-32 Liquid Pipe Diameter: 6.35mm (1/4") x2 Gas pipe diameter: 9.52 mm (3/8") x2 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Dimensions: External Unit Dimensions (WxHxD): 800x554x333 mm External Unit Weight: 35.5 Kg Midea Right The design of the Right range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A true work of art, embellished by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is turned on. Control your climate with your voice The Right series air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling the comfort of your home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can “ask” your air conditioner for the best for you, with Midea. Remote Control (Smart Kit) The indoor units can be equipped with Midea Smart Kit (optional) so that they can be controlled remotely via the Midea AIR app wherever you are. Super Cool The First series uses high-frequency start-up technology, which can generate a very high flow of fresh air in an extremely short time (about 30 seconds). Worry-free installation • Long pipe length and height difference • Robust installation plate suitable for application on pre-installation boxes • Up to 10 minutes of time saved with each installation Simple Connection The space between the wall and the body is very large and allows for the pipes to be housed in a comfortable and simple way. The solidity of the hooks fixing the chassis to the plate guarantees perfect adhesion of the product to the wall. Mono and Multi Internal Units The internal units are multipurpose so they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add additional units in the future. Linear speed regulation The rotation speed of the internal fan, beyond the usual predefined activity levels, can be adjusted within the values ​​1-100%. Refined design The design of the Right range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A true work of art, embellished by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is turned on. Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air exhaust grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made unassailable by salt and external polluting/atmospheric agents. Functions and Features • ECO function: Allows for electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of power to the outdoor unit during a prolonged Stand-by phase • Eco-friendly R32 • Emergency function • Silence • Leak alarm Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features 1) Model Model: Mission Pro MSMBAU-09HRFN8 Power: 9000 btu/h Wi-Fi Optional : CE-SK 102 code Performance: Cooling Capacity (kW): 2.60 Heating capacity (kW): 2.80 Air Flow (Min-Med-Max) m3/h 240-380-440 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-31-39 Sound power (Hi) dB(A) 55 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Dimensions (LPA) mm 810-200-300 ; 8.3kg 2) Model Model: 1 x Mission Pro MSMBBU-12HRFN8 Power: 12000 btu/h Wi-Fi Optional : CE-SK 102 code Performance: Cooling Capacity (kW): 3.52 Heating Capacity (kW): 3.81 Air Flow (min-med-max) m3/min 4.0-6.2-8.3 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-32-40 Sound power (Hi) dB(A) 56 Dimensions: Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Indoor Unit WxDxH (mm): 810×200×300 ; 8.5kg Outdoor Unit Catalog number: M2OG-14HFN8-Q Gases : R-32 Minimum-max number of connectable indoor units: 2 Energy efficiency - Cooling down Nominal Capacity kW: 5.20 Absorbed power (Max): W 1750 SEER Seasonal energy efficiency: 6.3 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 289 - Heating Nominal Capacity kW: 5.50 Absorbed power (Max): W 1450 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1680 Performance Outdoor Unit Air Flow: m3/h 2200 External Unit Sound Pressure Max (dB(A)): 56 Sound power (Max) dB(A): 64 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Characteristics Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 Dimensions Indoor Unit WxDxH (mm): 730×198×293 ; 7.4kg Outdoor Unit (LxDxH) (mm): 800x330x555 ; 30 Kgs MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA MISSION PRO The geometries used for the splits of the MISSION PRO range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Superior Performance Inverter 4 The exclusive QuattroTM Inverter technology allows excellent performance in all conditions of use, making the Midea Inverter compressor one of the best AC compressors in the world. In all conditions, Midea Inverter compressors work powerfully, efficiently, quickly and constantly Maximum efficiency - The step-less linear modulation of the compressor makes it possible to adapt the rotation speed, and therefore the capacity supplied, to the environmental conditions in an extremely precise manner. The compressor perfectly adapts its rotation speed to the needs of the system without waste and with maximum efficiency. Linear regulation - The internal fan speed is user selectable in a linear fashion between 1% and 100% instead of being available in 4 or 5 levels. In this way it is possible to make the product deliver the most congenial air flow to your needs, for maximum comfort. Less Noise - The speed of the external fan adapts to the external temperature conditions and to the working modes of the product, to ensure less noise and maximum efficiency Better Comfort - The temperature that can be set on the products is managed at intervals of 0.5°C. In this way it is possible to find the most correct temperature setting for your well-being. Do Not Disturb function By pressing a button on the remote control it is possible to silence all acoustic alarms, turn off the display of the indoor unit and reduce the speed of the indoor fan to a rotation speed lower than the minimum, normally selectable iECO function This function allows you to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode GEAR function The Mission PRO units are equipped with the Gear function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. The display of the internal unit is able to show, in addition to the selected temperature, also the room temperature and the instantaneous electrical power absorbed during operation Follow me function Select this function and the special sensor located in the infrared control will detect the ambient temperature around you, and then adjust the operation of the air conditioner according to your needs Other features of the series Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. Integrated Midea Smart Kit The indoor units of the MISSION-PRO series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Wi-Fi Control (Optional) Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Indoor Units 1) Model Indoor Unit Catalog Code: 1x MSMABU-09HRDN8 Power : 9000 Btu Cooling Capacity: 2.64 kW Heating Capacity: : 2.93 kW Air flow: 8.3 m 3 /min Sound pressure level : 22 ~ 28 ~ 34 ~ 38 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 805x282x205 mm Indoor Unit Weight: 7.9 Kg Wi-Fi Optional : CE-SK 103 code 2) Model Indoor Unit Catalog Code : 1x MSMABU-12HRDN8 Power : 12000 Btu Cooling Capacity: 3.52 kW Heating Capacity: : 3.81 kW Air flow: 7.7 m 3 /min Sound pressure level : 21 ~ 26 ~ 30 ~ 36 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 805x282x205 mm Indoor Unit Weight: 7.9 Kg Wi-Fi Optional : CE-SK 103 code Outdoor Unit Outdoor Unit Catalog Code: M2OG-14HFN8-Q Connectable Indoor Units : 2 Energy efficiency: SEER : 6.8 SCOP : 4 Energy Efficiency Class (Cooling) : A++ Energy Efficiency Class (Heating) : A+ Annual energy consumption Cooling/Heating : 211/1295 kWh/a Performance: Cooling Capacity: 4.10 kW Heating Capacity: 6.60 kW Std Cooling Absorption : 1270 W Heating Std Absorption: 1770 W Sound power level : 64 dB(A) Sound pressure level : 57 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Dimensions: External Unit Dimensions (WxHxD): 800x554x333 mm Weight of Outdoor Unit: 31.6 Kg Midea Right The design of the Right range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Control your climate with your voice The Right series air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Remote Control (Smart Kit) The indoor units can be equipped with Midea Smart Kit (optional) in order to be controlled remotely via the Midea AIR app wherever you are supercool The First series uses high-frequency start-up technology, capable of generating a very high flow of fresh air in an extremely short time (about 30 seconds). Hassle-free installation • Long piping length and height difference • Sturdy installation plate suitable for application on pre-arrangement boxes • Up to 10 minutes of time saved with each installation Simple connection The space between the wall and the body is very large and allows you to house the pipes in a comfortable and simple way. The solidity of the fixing hooks of the chassis to the plate guarantees perfect adhesion of the product to the wall. Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Speed ​​linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values ​​1-100%. Sophisticated design The design of the Right range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Indoor Units Model: 2 x Mission Pro MSMBBU-12HRFN8 Power: 12000 btu/h Wi-Fi Optional : CE-SK 102 code Performance: Cooling Capacity (kW): 3.52 Heating capacity (kW): 3.81 Air Flow (min-med-max) m3/min 4.0-6.2-8.3 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-32-40 Sound power (Hi) dB(A) 56 Dimensions: Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Indoor Unit WxDxH (mm): 810×200×300 ; 8.5kg Outdoor Unit Model: Catalog number: M2O-18FN8-Q Gases: R-32 Max indoor units that can be combined: 2 Power (V/Hz/Φ) : 220~240/50/1 Capacity: - Cooling down Nominal Capacity kW: 5.40 Absorbed power (Max): W 1790 SEER Seasonal energy efficiency: 6.3 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 300 - Heating Nominal Capacity kW: 5.60 Absorbed power (Max): W 1490 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1690 Performance: Outdoor Unit Air Flow: m3/h 2200 External Unit Sound Pressure Max (dB(A)): 56 Sound power (Max) dB(A): 64 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxDxH) (mm): 800x333x555 ; 36 kgs Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA MISSION PRO The geometries used for the splits of the MISSION PRO range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Superior Performance Inverter 4 The exclusive QuattroTM Inverter technology allows excellent performance in all conditions of use, making the Midea Inverter compressor one of the best AC compressors in the world. In all conditions, Midea Inverter compressors work powerfully, efficiently, quickly and constantly Maximum efficiency - The step-less linear modulation of the compressor makes it possible to adapt the rotation speed, and therefore the capacity supplied, to the environmental conditions in an extremely precise manner. The compressor perfectly adapts its rotation speed to the needs of the system without waste and with maximum efficiency. Linear regulation - The internal fan speed is user selectable in a linear fashion between 1% and 100% instead of being available in 4 or 5 levels. In this way it is possible to make the product deliver the most congenial air flow to your needs, for maximum comfort. Less Noise - The speed of the external fan adapts to the external temperature conditions and to the working modes of the product, to ensure less noise and maximum efficiency Better Comfort - The temperature that can be set on the products is managed at intervals of 0.5°C. In this way it is possible to find the most correct temperature setting for your well-being. Do Not Disturb function By pressing a button on the remote control it is possible to silence all acoustic alarms, turn off the display of the indoor unit and reduce the speed of the indoor fan to a rotation speed lower than the minimum, normally selectable iECO function This function allows you to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode GEAR function The Mission PRO units are equipped with the Gear function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. The display of the internal unit is able to show, in addition to the selected temperature, also the room temperature and the instantaneous electrical power absorbed during operation Follow me function Select this function and the special sensor located in the infrared control will detect the ambient temperature around you, and then adjust the operation of the air conditioner according to your needs Other features of the series Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. Integrated Midea Smart Kit The indoor units of the MISSION-PRO series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Wi-Fi Control (Optional) Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

IN THE ABSENCE OF THE PRODUCT THE NEXT BREEZELESS+ MODEL WILL BE SHIPPED Technical features Indoor Units Model Model: Ultimate Comfort MSMTAU-09HRFN Power: 9000 btu/h Performance: Cooling Capacity (kW): 2.60 Heating capacity (kW): 2.80 Air Flow (Min-Med-Max) m3/h 4.0-6.2-8.3 Sound pressure (Silent-Min-Med-Max) dB(A) 18-24-30-39.5 Sound power (Hi) dB(A) 54 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Dimensions (LPA) mm 886-188-315 ; 10.3kg Outdoor Unit Model: Catalog number: M2OG-14HFN8-Q Gases: R-32 Max indoor units that can be combined: 2 Power (V/Hz/Φ) : 220~240/50/1 Capacity: - Cooling down Nominal Capacity kW: 4.13 Absorbed power (Max): W 1280 SEER Seasonal Energy Efficiency: 6.8 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 237 - Heating Nominal Capacity kW: 4.48 Absorbed power (Max): W 1180 SCOP Seasonal energy efficiency (W/W): 3.8 Energy Efficiency Class: A Annual energy consumption KWh/A: 1437 Performance: Outdoor Unit Air Flow: m3/h 2200 External Unit Sound Pressure Max (dB(A)): 57 Sound power (Max) dB(A): 64 Liquid Side Pipe mm 6.35 (X2) Gas Side Pipe mm 9.52 (X2) Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxDxH) (mm): 800x333x554 ; 31.6 Kgs Max. Total length/ each IU m 40/25 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit. Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability. High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP Index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA Ultimate Comfort Ultimate Comfort by Midea represents the extreme evolution of domestic air conditioning systems: thanks to the exclusive Silky Cool technology, in fact, the air flow emitted by the air conditioner is channeled through hundreds of tiny holes, which transform the "classic" jet of air, often the cause of stiff necks and colds, in a delicate and pleasant flow. The result for the user? All the comfort of a Midea air conditioning system without the inconvenience caused by a continuous jet of air on our body. In fact, sheltered from direct air flows, the Ultimate Comfort air conditioning will be particularly comfortable even in those situations in which one stays for a prolonged period of time in the immediate vicinity of the split, during sleep (thanks also to a "record" ” of only 18 dB ), or again for those particularly delicate subjects such as children and the elderly. All without affecting the diffusion of cold and/or heat: on the contrary, Ultimate Comfort guarantees air propagated at angles much higher than those allowed by traditional air conditioners. Vertically, the new Midea air conditioner reaches an angle of 110° (against the 80° of the more common products) which rises to 120° (against 90°) horizontally: the air thus arrives more uniformly even in the most remote points of the room , bringing benefits to every corner of the house. Air flow management An air flow that can be adjusted in maximum freedom, thanks to the possibility of controlling the direction of the air flow via the remote control, both on the vertical and on the horizontal axis. All for maximum comfort at 360°. Inverter Quattro technology The new Ultimate Comfort air conditioner, thanks to the exclusive Inverter Quattro technology , allows an intelligent and modulated use of energy resources, with minimum electricity consumption guaranteed by class A++/A++, while ensuring excellent performance and "top of the range" functions: from possibility of cooling the house despite external temperatures of 60°C, up to the instant cooling function, which thanks to the use of a high-frequency compressor satisfies any immediate cooling needs of the rooms of the house Air quality Midea air conditioners are designed to guarantee you an enveloping freshness and air quality that is always at the top. Equipped with self-cleaning technology, which allows for simplified maintenance, the Ultimate Comfort air conditioner also stands out for its Air Magic filtration system , which in addition to eliminating microbes and other harmful substances, offers all the advantages of ionisation, which intercepts and eliminates bacteria present suspended in the air, in order to make it not only fresh and/or warm, but also healthy, thus helping to contain any allergies to dust, pollen and other inhalable substances. All obviously controllable remotely via the Midea Air App installed on your smartphone, which allows you to take advantage of additional functions such as the weekly programming of the desired temperatures, as well as to monitor the daily, weekly and monthly consumption of Ultimate Comfort. Equipped with an intelligent sensor, Ultimate Comfort also guarantees control of the humidity level of the environment: in fact, the desired degree of humidity can be set, in a range between 30% and 90%. Integrated Wi-Fi control Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely. Series features: Self-diagnosis In the event of a breakdown, a fault code system allows users to report defects in a simple and clear way in order to quickly activate the assistance service Four inverters The quattro inverter technology consists in the adoption of linear regulation systems of the speed of the internal fan (selectable between 1% and 100%) of regulation of the temperature required in the room in units of 0.5 °C and step-less linear modulation of outdoor unit compressor and fan. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. GEAR function The Ultimate Comfort units are equipped with the GEAR function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. Integrated Midea Smart Kit The indoor units of the Ultimate Comfort series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Follow me function The room temperature can be detected by a special sensor located in the infrared control, in order to obtain a more precise detection Do Not Disturb function By pressing a button on the remote control it is possible to silence all the acoustic alarms, turn off the display of the internal unit and reduce the speed of the internal fan to a rotation speed lower than the minimum, normally selectable. Condensation control The Ultimate Comfort units can work in cooling mode even with a low outside temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Air Conditioner Midea Dual Split Inverter XTREME series 12+18 with M2OF-18HFN8-Q R-32 Wi-Fi Integrated 12000+18000 btu - New Internal Units 1) Model: Internal Unit Catalog Code: MSAGBU-12HRFN8 Series: Xtreme Power: 12000 btu/h Cooling capacity: 3.5 kW Heating capacity: 3.8 kW Air flow rate: 350~400~530 m 3 /h Sound Power Level: 56 dB(A) Sound pressure level : 23~32~38 dB(A) Liquid Pipe Diameter: 6.35mm (1/4") Gas Pipe Diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 835x295x208 mm Internal Unit Weight: 8.7 Kg Built-in Wi-Fi 2) Model: Internal Unit Catalog Code: 1 x MSAGCU-18HRFN8 Series: Xtreme Power: 18000 btu/h Cooling capacity: 5.30 kW Heating capacity: 5.50 kW Air flow rate: 500~600~800 m 3 /h Sound Power Level: 58 dB(A) Sound pressure level : 31~37~41 dB(A) Liquid Pipe Diameter: 6.35mm (1/4") Gas Pipe Diameter: 12.7 mm (1/2") Internal Unit Dimensions (WxHxD): 969x241x320 mm Internal Unit Weight: 11.2 Kg Built-in Wi-Fi EXTERNAL UNIT Catalog Code: M2OF-18HFN8-Q Gas: R-32 Max. internal units that can be combined: 2 Power supply (V/Hz/?) : 220~240/50/1 Capacity: - Cooling Rated Capacity kW: 5.28 Power Consumption (Max): W 1630 SEER Seasonal Energy Efficiency: 6.1 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 304 - Heating Rated Capacity kW: 5.57 Power Consumption (Max): W 1500 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1537 Performance: External Unit Air Flow: m3/h 2200 Sound Pressure External Unit Max (dB(A)): 56 Sound power (Max) dB(A): 65 Cooling/Heating Operating Range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (WxDxH) (mm): 800x333x554; 35.5 kg Midea Xtreme The new Midea Xtreme air conditioning series “flexes its muscles” in terms of product performance, combining a refined and compact design with extreme performance to meet the challenges of the most difficult installations, with the certainty of the promise of comfort, regardless of the environmental conditions. To ensure you the greatest comfort in the world Midea Inverter air conditioners offer three operating modes: 50%, 75% and 100% power. You can choose your favorite mode to save energy. Temperature fluctuation contained in +/-0.1 °C It is no longer necessary to repeatedly turn the air conditioner on or off or continuously adjust the temperature because Inverter 4 efficiently maintains a constant temperature thanks to the variation in the rotation speed of the compressor. High silence Extreme operates at a very low noise level, less than 20 decibels to ensure that your sleep is not disturbed. No more drafts, now just gentle puffs of air Prevent the wind from blowing directly at you by using the remote control to instantly adjust the wind direction Air conditioning of large spaces The optimized air duct design and turbo fan speed provide a stronger airflow and allow fresh air to reach up to 25 meters away*. (*Applies to 90IDU only). 3D Airflow The directional blades move automatically to direct the airflow to every corner of the room and keep it envelopingly cool. Characteristics Cooling and heating Cooling kW: 2.6 / 3.2 / 5.3 / 7.2 Heating kW: 2.8 / 3.8 / 5.5 / 7.6 Self-diagnosis 1W Standby Condensation control Follow Me Function Eco function LED display Refrigerant Leak Alarm GEAR function Do Not Disturb Function Hydrophilic Aluminium Remote control Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

IN THE ABSENCE OF THE PRODUCT, THE NEXT BREEZELESS+ MODEL WILL BE SHIPPED Technical Features Internal Units 1) Model Model: Ultimate Comfort MSMTAU-09HRFN Power: 9000 btu/h Performance: Cooling Capacity (kW): 2.60 Heating Capacity (kW): 2.80 Air flow (Min-Med-Max) m3/h 4.0-6.2-8.3 Sound pressure (Silent-Min-Med-Max) dB(A) 18-24-30-39.5 Sound power (Hi) dB(A) 54 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection pipe (gas): 9.52mm (3/8”) Dimensions (LxWxD) mm 886-188-315 ; 10.3 kg 2) Model: Model: Ultimate Comfort MSMTAU-12HRFN8 Power: 12000 btu/h Performance: Cooling Capacity (kW): 3.50 Heating Capacity (kW): 3.80 Air flow (Min-Med-Max) m3/h 6.3-8.0-10.0 Sound pressure (Silent-Min-Med-Max) dB(A) 19.5-26-32-40.5 Sound power (Hi) dB(A) 54 Dimensions: Connection tube (liquid): 6.35mm (1/4”) Connection pipe (gas): 9.52mm (3/8”) Indoor Unit (LPA) mm 886-188-315 ; 10.3 kg External Unit Model: Catalog Code: M2OG-14HFN8-Q Gas: R-32 Max. internal units that can be combined: 2 Power supply (V/Hz/Φ) : 220~240/50/1 Capacity: - Cooling Rated Capacity kW: 4.13 Power Consumption (Max): W 1280 SEER Seasonal Energy Efficiency: 6.8 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 237 - Heating Rated Capacity kW: 4.48 Power Consumption (Max): W 1180 SCOP Seasonal Energy Efficiency (W/W): 3.8 Energy Efficiency Class: A Annual energy consumption KWh/A: 1437 Performance: External Unit Air Flow: m3/h 2200 Sound Pressure External Unit Max (dB(A)): 57 Sound power (Max) dB(A): 64 Liquid Side Pipe mm 6.35 (X2) Gas Side Pipe mm 9.52 (X2) Cooling/Heating Operating Range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: External Unit (WxDxH) (mm): 800x333x554; 31.6 kg Max. Total length/each unit 40/25 m Pipe length (min per unit): 3 m Max. difference in altitude (each UI) m 10 MIDEA Multi Line The range of MULTI systems by Midea is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems, up to Penta combinations. The depth of the range also includes the internal units, available in all the main categories, such as Split, Ducted, 4-way Cassette, and Floor Console: all air conditioning systems characterized by very high efficiency, both in cooling and heating mode. To broaden the scenario of possible installations, all the MULTI Line by Midea is " Free Match ": each external unit can be connected to internal units of different types. Relevant Features: "Diamond" external unit Midea outdoor units are made with the innovative diamond cut shape, without sharp edges and without visible screws at the front panel. The air expulsion grille, inspired by the Archimedes screw, contains a newly designed fan to minimize noise. The T-shaped rib on the top panel allows for greater strength and stability. High efficiency HSS compressors The compressors used by Midea are characterised by a robust and reliable structure designed to operate at high temperatures and pressures in order to guarantee maximum reliability over time. Easy Installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled completely independently. Energy saving Precise control of the inverter sine wave and active PFC technology ensure minimum energy consumption and maximum silence. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) refrigerants in its products to counteract the effects of global warming and the feared "Greenhouse Effect". - Low GWP Index Thanks to its low GWP index value (675), R32 refrigerant is characterised by CO2 equivalent emissions that are significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under the same conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Ease of Installation Midea has developed a range of indoor units that can be applied to both outdoor units using R32 refrigerant and outdoor units using R410A refrigerant. In this way, the warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA Ultimate Comfort Midea 's Ultimate Comfort represents the extreme evolution of home air conditioning systems: thanks to the exclusive Silky Cool technology, in fact, the air flow emitted by the air conditioner is channeled through hundreds of tiny holes, which transform the "classic" jet of air, often the cause of stiff necks and colds, into a delicate and pleasant flow. The result for the user? All the comfort of a Midea air conditioning system without the discomfort caused by a continuous jet of air on our body. Sheltered from direct air flows, in fact, the Ultimate Comfort air conditioning will be particularly comfortable even in those situations in which you stay for a prolonged period of time in the immediate vicinity of the split, during sleep (thanks also to a “record” silence of only 18 dB ), or even for particularly delicate subjects such as children and the elderly. All this without affecting the diffusion of cold and/or heat: on the contrary, Ultimate Comfort guarantees air propagated with angles much higher than those allowed by traditional air conditioners. Vertically, the new Midea air conditioner reaches 110° of angle (against the 80° of the most common products) which rise to 120° (against 90°) in a horizontal direction: the air thus arrives more uniformly even in the most remote points of the room, bringing benefits to every corner of the house. Airflow management An air flow that can be adjusted with complete freedom, thanks to the possibility of controlling the direction of the air flow via the remote control, both on the vertical and horizontal axis. All for maximum 360° comfort. Inverter Technology Quattro The new Ultimate Comfort air conditioner, thanks to the exclusive Inverter Quattro technology , allows for intelligent and modulated use of energy resources, with minimum electricity consumption guaranteed by the A++/A++ class, while ensuring excellent performance and “top of the range” functions: from the possibility of cooling the home despite external temperatures of 60°C, to the instant cooling function, which thanks to the use of a high-frequency compressor satisfies any immediate cooling needs of the rooms in the house. Air quality Midea air conditioners are designed to guarantee you enveloping freshness and always top air quality. Equipped with self-cleaning technology, which allows for simplified maintenance, the Ultimate Comfort air conditioner also stands out for its Air Magic filtration system , which in addition to eliminating microbes and other harmful substances, offers all the advantages of ionization, which intercepts and eliminates bacteria suspended in the air, making it not only fresh and/or warm, but also healthy, thus helping to contain any allergies to dust, pollen and other inhalable substances. All of this can obviously be controlled remotely via the Midea Air App installed on your smartphone, which allows you to take advantage of additional functions such as weekly programming of the desired temperatures, as well as monitoring the daily, weekly and monthly consumption of Ultimate Comfort. Equipped with an intelligent sensor, Ultimate Comfort also guarantees control of the humidity level of the environment: in fact, you can set the desired level of humidity, in a range between 30% and 90%. Built-in Wi-Fi Control Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be checked to evaluate the correct functioning of the system peripherals. Weekly timer The product can be set to turn on and off on a weekly basis from the App to program the use of the product even remotely. Series Features: Self-diagnosis In the event of a breakdown, a fault code system allows users to be informed of defects in a simple and clear manner in order to quickly activate the assistance service. Inverter Four The inverter quattro technology consists in the adoption of linear regulation systems of the internal fan speed (selectable between 1% and 100%), regulation of the required room temperature at 0.5 °C units and step-less linear modulation of the compressor and fan of the external unit. 1W Standby In the event of a prolonged shutdown, the internal units completely remove power from the external unit, reducing electricity consumption in the Stand By phase. Refrigerant Leak Alarm If the temperatures of the refrigeration circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows this condition to be identified. GEAR function The Ultimate Comfort units are equipped with the GEAR function which allows you to limit the maximum rotation speed of the compressor and the consequent capacity delivered, significantly improving the specific efficiency of the product. Midea Smart Kit Integrated The internal units of the Ultimate Comfort series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Follow Me Function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection. Do Not Disturb Function By pressing a button on the remote control, you can silence all acoustic alarms, turn off the indoor unit display and reduce the speed of the indoor fan to a speed lower than the minimum normally selectable speed. Condensation control Ultimate Comfort units can work in cooling mode even with low outside temperatures to air condition technical rooms. ECO function This function allows you to limit the rotation frequency of the compressor to reduce the capacity delivered and significantly increase the specific efficiency of the product when used in cooling mode. Hydrophilic Aluminium The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to corrosion from atmospheric agents Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase

Read more less