Technical features Product Code : DIVER 200 MA Power supply : 1x230V~ 50Hz Power : 1,5 kW (2HP) Diameter : 127mm Operating range: from 0.6 to 12 m3 /h with head up to 96 metres Pumped liquid: Clean, without solid or abrasive bodies, non-aggressive Maximum presence of sand in the water: 50gr/ m3 Liquid Temperature Range : from 0°C to +35°C Maximum immersion : 20 metres Delivery port diameter: 1" 1/4 Gas Power Tolerance : +6% / -10% Maximum number of starts: 20/h Motor Protection Degree: IP 68 Engine Protection Class : F Installation : In wells, tanks and cisterns, in vertical position Special Executions on Request: Other voltages and/or frequencies. Automatic version with float. Applications DIVER electric pumps are used in systems for lifting clear water from wells, first collection tanks or cisterns, Roman wells or streams and are suitable for the distribution of pressurized water in domestic systems, small agriculture, sprinkler irrigation of gardens and vegetable gardens. The pump, particularly silent, used inside wells or tanks avoids all the problems related to suction and deactivation Construction features of the pump Submersible monobloc multistage pump with the hydraulic part under the motor which is cooled by the pumped liquid. Impellers and diffusers in Noryl reinforced with glass fiber with wear-resistant wear ring in stainless steel. Outer jacket, stator jacket, upper head with sleeve and closing ring in AISI 304 steel. Encapsulated stator. Cast iron supports. Rotor shaft extension in AISI 304. Motor side lip seal and silicon carbide/silicon carbide mechanical seal on pump side Construction Characteristics of the Engine • Submersible two-pole asynchronous type built completely in stainless steel, dry and cooled from the outside by the pumped liquid. Stator encapsulated in AISI 304L • Squirrel cage rotor mounted on ball bearings, and oversized to guarantee silence, reliability and durability • On request, the single-phase version is supplied with the CONTROL BOX • Protection by the user for the three-phase version • Automatic version with float available • Version with support base and side suction (DRY) available on request Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code : DTRON 3 35/120 Power supply : 220~240/50/1 Power : 0.6 kW (0.8 HP) Maximum ambient and liquid temperature: 50°C Factory cut-in : 2.4 bar (±0.2) Flanging or delivery thread : Threaded 1" 1/4 Dimensions : 651x185mm New DTron 3 series The evolution of the submerged autoclave 43 years of experience. An unstoppable drive towards innovation. Constant communication with all markets. This is the ecosystem in which DAB products are born and evolve. The new DTron series is proof of this: an important step forward in redefining the characteristics of submersible pumps , made with the security of the market leader DTron 2 and DTron 3 are born from the desire to create a range of "easy" but extremely efficient pumps . Technologically advanced but simple to use. Reliable and performing, in the various applications, thanks also to a set of intelligent accessories. DTron 3 Together with a series of fully integrated and modular accessories, they represent an offer of solutions for every use in different types of installations. The customized value For Dab it is essential to design solutions according to the real needs of all the players in the sector The new DTron submersible pumps guarantee advantages for installers, distributors and end users by saving them space, time and costs A large, constant and rapid evolution possible only thanks to the attention and listening of our top market experts: you. A Global Listen We move water all over the world, with over 2 million pumps installed every year we are also able to handle special needs. In Australia where nature still has a dominant role in the territory, the functioning of our products is put to the test by insects and small reptiles that infiltrate the pumps to make their den Thanks to this experience DAB has designed the new models of the DTron range making them unassailable by any external agent, solving the case that emerged in Australia and in fact making our solutions even safer in all geographical areas of the world Experiences and Innovation 43 years of experience, an unstoppable drive towards innovation and constant communication with all markets. This is the ecosystem in which DAB products are born and evolve The new DTron series is proof of this: an important step forward in redefining the characteristics of pumps submerged, made with the safety of the market leader DTron 3 was created to create a range of "easy" but extremely efficient pumps. Very advanced but simple to use. Reliable and performing, in the various applications, thanks also to a set of intelligent accessories Integrated vase A quick and easy installation. A more essential and less bulky system. Greater reliability in time. The expansion vessel improves the pressure tightness of the system, avoiding unnecessary restarts, reducing water hammer and lengthening the life of the pump. With this integrated component, installation times are reduced NFC technology A simple and constant control of the pump. Maximum ease and autonomy in the installation of accessories. NFC (Near Field Communication) allows the use of pumps with float and level sensor* without the need for any additional wiring. The accessories attach without having to disassemble the pump body. All this guarantees speed and reliability. PLC technology Only for DTron 3 A simple and constant control of the pump. Maximum ease and autonomy in the installation of accessories. PLC (Power Line Communication) allows the use of the Com Box electronic control device without the need for any physical connection but through the electric power supply line. DConnect With DConnect Box 2 you access the DAB cloud service. The new App allows you to manage and monitor the system pressure, the alarms and the residual availability of water in the tank directly from your smartphone or tablet wherever you are! DTron 3 thus becomes the first submersible pump equipped with a display DOC68 Maximum installation flexibility. The ultimate in waterproofing. The maximum of unassailability. With this accessory and the IP68 certification, DTron pumps can also be installed out of the water, thus transforming submersible pumps into real traditional autoclaves Vent valve Benefits during installation and throughout use. The vent valve allows for immediate priming upon first installation and always guarantees the correct functioning of the pump. Facilitated maintenance Modular and functional construction. Thanks to the modular components of the pump it is possible to make maintenance easier. Elements that can be disassembled, repaired and replaced separately which simplify the management of any problems, reducing maintenance costs. Com Box Only for DTron 3 More comfortable. Smarter. With Com Box you can intervene on the pump pressure parameters and view any alarms. No direct connection to the pump is required (PLC Optional accessories X-Kit for the X version Combined with the X version, it allows the suction of water at a level such as to avoid the pumping of dust and sludge present on the bottom of wells and tanks DOC68 With the DOC68 it is possible to install DTron also outdoors as an IP68 certified surface pump Floating Allows the water level of the tank to be detected, preventing emptying of the same, and the pump to go into blockage, avoiding dry running due to too low a water level Level sensor Only for DTron 3 Connected to the DConnect Box 2, it checks the water level in the tank and communicates it to the user via the App (only on DTron 3) COM Box Only for DTron 3 It allows you to change the start and stop pressure and to check any pump alarms, in an easy and intuitive way DConnect Box 2 Only for DTron 3 Thanks to DConnect Box 2 you can control the pump, set the start and stop parameters, see alarm details and monitor the pressure directly from your smartphone, obtaining the best performance and lightness of maintenance never seen before Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model Self-priming centrifugal electric pump Dab Model DP 102M Energy efficiency Operating range: up to 4.3 m3/h. Pumped liquid: clean, free from solid or abrasive substances, not viscous, non-aggressive, non-crystallised and chemically neutral, close to the water features. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Maximum ambient temperature: +40°C Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Installation: fixed in horizontal position. Special executions on request: other voltages and/or frequencies. Motor protection degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220-240V / 50Hz three-phase 230-400V / 50Hz APPLICATIONS Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector (optional) to be introduced in wells of 4" or diameter greater. Used for the water supply of farmhouses and small agriculture. CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump: Body and motor support in cast iron. Technopolymer impeller and diffuser. Stainless steel shim ring. Mechanical seal in carbon/ceramic. Ejector: Cast iron body. Venturi tube in technopolymer A and brass nozzle. The ejector is available in three models (E 20 - E 25 - E 30) depending on the performance required. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Rotor mounted on greased-for-life and oversized ball bearings. Built-in thermo-amperometric protection and capacitor permanently inserted in single-phase motors. For the protection of the three-phase motor it is recommended to use a motor protection switch in compliance with the norms. Construction according to CEI 61-69 (EN 60335-2-41) standards. Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector to be introduced in wells of 4” or greater diameter. Used for the water supply of farmhouses and small agriculture. Operating range: up to 4.3 m3/h. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Self-priming: up to 27 metres. Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: EUROINOX 50/50 M single-phase with pump body in stainless steel N° impellers: 5 Power supply: 1 x 230V~50Hz Power: 1kW (1.36HP) Capacitor capacity: 25mF Operating range: flow rate up to 80 l/min (4.8 m3/h) with heads up to 72 metres. Maximum working pressure : 8 bar (800 kPa) To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics EUROINOX Multistage centrifugal electric pumps DOMESTIC WATER SUPPLY Horizontal axis multistage centrifugal pump, characterized by extremely silent operation, suitable for domestic use for water supply and pressurization, irrigation of orchards and gardens, movement of water in general. Series features: Operating range: from 10 to 120 litres/min. with head up to 72 m. Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral, close to the characteristics of water. Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41) from 0°C to +40°C for other uses. Maximum ambient temperature: +40°C Maximum working pressure: 8 bar (800 kPa) Installation: fixed or portable in horizontal position. Motor protection degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220/240 V - 50 Hz - 2 poles three-phase 230/400 V - 50 Hz - 2 poles Construction features of the pump: Pump body in stainless steel. Motor support in die-cast aluminium, seal holder cover in AISI 304 steel. Mechanical seal in carbon/ceramic. Rotor shaft in AISI 304 steel. Impellers, diffuser bodies and diffusers in technopolymer. Stainless steel shim rings. Engine construction features: Continuous duty asynchronous motor. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. Protection by the user for the three-phase version. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product Code : Feka 300 MA 40th Power supply : 1x230V~ 50Hz Power : 0.22 (0.30HP) Minimum and maximum flow rate: from 1 m3 /h to 16 m3 /h Maximum head: 7.5 m Maximum Immersion Depth : 7 meters with cable of adequate length Type of Pumped Liquid : wastewater, wastewater and rainwater Free Passage: 25 mm Minimum suction level: 38 mm Minimum and maximum supported liquid temperature: from +0°C to +35°C for domestic use, from +0°C to +50°C for other uses Motor Protection Degree: IP 68 Motor Insulation Class : F Impeller Construction Material: Technopolymer Type of Possible Installation: Fixed or portable in vertical position FEKA Submersible Pumps for Clear Water Feka 300 is a submersible pump suitable for draining and lifting clear, gray waste water or rainwater in domestic and residential areas. The pumps have been redesigned on the occasion of the forty years of marketing, making them even more reliable, resistant and ergonomic to use. The back impeller in technopolymer allows the passage of solid bodies up to 25 mm. They are also suitable for draining flooded basements, cellars and garages or to prevent flooding when installed in rainwater collection wells, they can also be used as portable pumps in emergency situations to drain water from flooded rooms in the presence of mud, leaves or debris. The pumps are designed for fixed or mobile installations and are available in automatic versions with integrated float switch or manual versions without float switch. The pump body and the suction grille are in technopolymer, the motor shaft in AISI 431 stainless steel. Sturdy and reliable, they have a triple ring seal in oil bath and the continuous service asynchronous submersible motor Stator inserted in an hermetic stainless steel casing and rotor mounted on oversized ball bearings. Thermal protection incorporated in all single-phase versions. Possibility of dry running up to 1 minute. In compliance with European standard EN 60335-2-41, a 10-metre power cable is mandatory for the pump for outdoor use Construction features of the pump Pump body and suction grille in technopolymer. Triple ring seal in oil bath Construction Characteristics of the Engine Continuous service asynchronous type submersible motor. Stator inserted in an hermetic stainless steel casing and rotor mounted on oversized ball bearings. Thermal protection incorporated in all single-phase versions. Motor in AISI 304 stainless steel and shaft in AISI 431 steel for greater resistance to corrosive attacks Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less