Dab EvoPlus B 120/280.50 M electronic circulator EVOPLUS circulators they can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as offices, condominiums, hospitals and schools. The EVOPLUS line consists of a complete range of circulators , with a maximum flow rate up to 75.6 m3/h and maximum head up to 18 m3. they are equipped with fl anged ports up to DN 100 in single and twin versions. INTELLIGENT PRODUCT Choosing Evoplus means saving while respecting the environment. Evoplus is an innovative product because it was designed to really improve life: cutting-edge components and electronics guarantee high performance, low consumption and simple and immediate usability. The impact on the environment is significantly reduced, with a real reduction in consumption of over 70% compared to the old circulators. Evoplus: technological intelligence and eco-friendly design at your service. Evoplus: technological intelligence and eco-friendly design at your service Technology and integrated electronics guarantee constant optimization of the operating regime which eliminates waste and lengthens the life cycle of a product designed to last over time. Speed ​​and power are determined by the specific performance request, allowing an action that is always effective and effi cient, personalized in all application contexts. Simple and usable technology Evoplus simplifies the installation, maintenance and control processes, with savings in terms of time and costs which confirm the competitiveness of the entire range. • ease of installation thanks to the elimination of the by-pass in the system • clear and intuitive interface guaranteed by an easy and clear display for viewing the operating status, which favors the practical selection of the regulation mode • constant control ensured by the remote control function which allows interactive, easy and immediate management, at any time and from any location SUSTAINABLE Eco-compatibility is a strategic choice and a mandatory requirement, thanks to the Erp Ecodesign Directive. Evoplus circulators with an efficiency technology oriented towards respect for the environment, today offer a safe change, with a view to sustainable and aware development. The Erp "Eco-design" 2009/125/EC regulation: involves all "energy-related products" and aims in various steps to direct the market towards the diffusion of high-efficiency "intelligent" products. Implementation step of the Regulation: • From 1 August 2015: the EEI limit value will be further lowered to 0.23 also for pumps integrated in heat generators and solar stations. • From 1 January 2020: the validity of the limit value EEI 0.23 will also apply to the replacement of pumps integrated in existing heat generators TECHNICAL DATA Operating range: from 3 to 75.6 m³/h with head up to 18 metres; Liquid temperature range: -10°C to +110°C Pumped liquid: clean, free from solids and mineral oils, non-viscous, chemically neutral, close to the characteristics of water. (glycol max 30%) Maximum working pressure: 16 bar (1600 kPa) Standard flanging: DN 32, DN 40, DN 50, DN 65, PN 6 / PN 10 / PN 16 (4 slots), DN 80 and DN 100, PN 6 (4 slots) Maximum ambient temperature: + 40°C. Minimum head pressure: the values ​​are shown in the relative tables. Special executions on request: DN 80 , DN 100 PN 10 / PN 16 (8 holes) Accessories (Counterflanges): PN 10 DN 32 - DN 40 - DN 50 - DN 65 PN 6 DN 80 - DN 100 Electromagnetic compatibility: EVOPLUS circulators comply with EN 61800-3 standard, in category C2, for electromagnetic compatibility. Electromagnetic emissions: residential environment (containment measures may be required in some cases). Conducted emissions: residential environment (in some cases they can be required containment measures) APPLICATIONS EVOPLUS electronic circulation pumps can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as: - Large residential buildings - Condominiums and blocks of flats - Homes - Clinics and hospitals - Schools - Office buildings - Real estate All models are available in both single and twin versions. Execution with bronze pump body for the recirculation of sanitary water, available in single version with flanged ports DN 32, DN 40, DN 50 and DN 65. Arranged as standard for control via external 0-10 v signal. or PWM and for connection to ModBus plant management systems (LonBus with special optional communication module). It is possible to remotely control the single version thanks to the Dconnect service (with Dconnect Box supplied separately) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: JET 132 M single-phase Code: 102660100 Power supply: 1 x 220-240V~50Hz Power: 1kW (1.36HP) Capacitor capacity: 25mF Operating range: flow rate up to 80 l/min (4.8 m3/h) with heads up to 48 metres. Liquid temperature range: from 0°C to +35°C or 40°C Maximum working pressure : 6 bar (600 kPa) Maximum ambient temperature: +40°C. To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics JET Self-priming centrifugal electric pumps DOMESTIC WATER SUPPLY Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Particularly suitable for water supply in domestic systems, small-scale agriculture, gardening and in general where the self-priming function is required. Jet: pump body in cast iron. Motor support in cast iron, impeller, diffuser, Venturie tube in technopolymer sand guard. Stainless steel shim rings. Mechanical seal in carbon/ceramic. Asynchronous type motor, enclosed and cooled by external ventilation. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. To protect the three-phase motor, the use of a motor protection switch is recommended in accordance with current standards. Series features: Operating range: from 0.4 to 10.5 m3/h with heads up to 62 metres. Liquid temperature range: from 0°C to +35°C for domestic use (EN60335-2-41) from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum ambient temperature: + 40°C. Maximum working pressure: 6 bar (600 kPa) for Jet and Jetcom. 8 bar (800 kPa) for Jetinox and jet 200-300-151-251. Degree of protection: IP 44 (IP 55 at the terminal block). Insulation class: F Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

TECHNICAL DATA Operating range: from 0.5 to 36 m3 /h Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral, close to the characteristics of water. Liquid temperature range: from 0°C to +40°C Maximum ambient temperature: +40°C Maximum working pressure: PN16 Special executions on request: contact the sales network Degree of protection: IP44 APPLICATIONS Booster sets particularly suitable for domestic use, small systems for civil or industrial use, irrigation systems, washing systems. They stand out for their absolute reliability, simplicity of operation and minimal maintenance. CONSTRUCTION CHARACTERISTICS - COMPONENTS HYDRAULIC PART KVC multistage centrifugal electric pumps. Galvanized sheet metal base complete with 4 anti-vibration rubber feet. Suction and delivery manifolds in AISI 304 steel. Ball valves with union on the suction and delivery of each pump. Suction check valves of each pump. 2 AISI 304 stainless steel caps for closing the manifolds. Radial pressure gauge with shut-off valve. 1 membrane tank 8 liters (optimizes the number of pump starts). ELECTRICAL PART 1 Active Driver Plus module on the delivery of each pump (see hints on Active Driver Plus at the beginning of the paragraph). 1 protection switchboard. MULTI INVERTER SYSTEM WITH ACTIVE DRIVER PLUS The inverter continuously regulates the rotation speed of an electric pump, so as to maintain a constant pressure as the flow rate varies. The other electric pumps, always at variable speed, are inserted in cascade after the first one has reached maximum speed and, by modulating, they compensate for the pressure fluctuations in the system. At each operating cycle, it is possible to set the restart switch to a different pump, so as to ensure uniform use of all the electric pumps. It is also possible to set work times for each pump, with operation switching after the set time. The “SP” pressure can be adjusted by the user using two keys “+” and “-” placed on the AD (as a rule all the pumps are set to the same pressure value). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

TECHNICAL DATA Operating range: from 0.5 to 36 m3 /h Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral, close to the characteristics of water. Liquid temperature range: from 0°C to +40°C Maximum ambient temperature: +40°C Maximum working pressure: PN16 Special executions on request: contact the sales network Degree of protection: IP44 APPLICATIONS Booster sets particularly suitable for domestic use, small systems for civil or industrial use, irrigation systems, washing systems. They stand out for their absolute reliability, simplicity of operation and minimal maintenance. CONSTRUCTION CHARACTERISTICS - COMPONENTS HYDRAULIC PART KVC multistage centrifugal electric pumps. Galvanized sheet metal base complete with 4 anti-vibration rubber feet. Suction and delivery manifolds in AISI 304 steel. Ball valves with union on the suction and delivery of each pump. Suction check valves of each pump. 2 AISI 304 stainless steel caps for closing the manifolds. Radial pressure gauge with shut-off valve. 1 membrane tank 8 liters (optimizes the number of pump starts). ELECTRICAL PART 1 Active Driver Plus module on the delivery of each pump (see hints on Active Driver Plus at the beginning of the paragraph). 1 protection switchboard. MULTI INVERTER SYSTEM WITH ACTIVE DRIVER PLUS The inverter continuously regulates the rotation speed of an electric pump, so as to maintain a constant pressure as the flow rate varies. The other electric pumps, always at variable speed, are inserted in cascade after the first one has reached maximum speed and, by modulating, they compensate for the pressure fluctuations in the system. At each operating cycle, it is possible to set the restart switching to a different pump, so as to guarantee uniform use of all the electric pumps. It is also possible to set work times for each pump, with operation switching after the set time. The “SP” pressure can be adjusted by the user using two keys “+” and “-” placed on the AD (as a rule all the pumps are set to the same pressure value). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : FEKAFOS 550 DOUBLE Operating range : from 1 to 32 m3 /h with head up to 23 metres Liquid temperature range : + 45° C Pumped liquid: ground water, rain water, clear waste water, black waste water and river or lake water. Installation : Fixed to the floor if inside a building. Inground if outside a building Not drive-over, but walkable only up to 100 kg. Temperature range of the pumped liquid: +45° C Size : 790 x 1220 x 965 Weight : 74Kg FEKAFOS 550 DOUBLE AUTOMATIC LIFTING STATIONS FOR 2 PUMPS APPLICATIONS Pumping stations suitable for the collection and return to the sewer system of domestic waste water (waste, gray and rain), of basements or garages for one or more housing units, when the sewer system cannot be reached by gravity CONSTRUCTION FEATURES CAPACITY: 550 l MATERIALS: LLDPE CONNECTIONS: Inlets DN 50/110 Ventilation DN 50 - Outlet G2” COMPONENTS INCLUDED: 2 DSD2” lifting devices and anti-rotation bracket for FEKA VS and VX 6 Cable glands for double pump and floats 2 FEKA VS and VX floating cable clamp kit 3 Floats and alarm float holder COMPONENTS EXCLUDED: Pump: to be selected according to the possible configurations Panel: to be selected according to the possible configurations Panel: to be selected according to the possible configurations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

General characteristics Brand: Dab Code: 60194400 Model: NOVA 300 MA Data sheet Operating range: from 1 to 16 m3/h with heads up to 10.2 metres. Liquid temperature range: from 0°C to +35°C for domestic use Pumped liquid: cloudy water without fibers Particle size passing through the suction grille: NOVA 180 - NOVA 200 5mm. NOVA 300 - NOVA 600 10 mm. depth min. draft: NOVA 180 A 77mm NOVA 180 NA - NOVA 200 8mm NOVA 300 85mm NOVA 600 A 175mm NOVA 600 NA 38mm Maximum immersion: 7 meters. Maximum dry run time: 1 minute. Degree of protection: IP68. Insulation class: F Description The submersible pump of the NOVA series is suitable for domestic use of stationary applications with automatic operation, for draining basements and garages subject to flooding. Thanks to its compact and handy shape, it also finds particular application as a portable pump for emergencies such as: drawing water from tanks or rivers, emptying pools and fountains or excavations and underpasses. Also suitable for gardening and hobby work in general. The level switch allows a fixed installation guaranteeing its automatic functioning. CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump body, impeller, cap and suction grille in water-resistant technopolymer. Motor, rotor shaft and screws in stainless steel. Triple seal with interposed rings with pre-oil chamber. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Continuous service asynchronous submersible type. Stator inserted in a stainless steel hermetic casing and covered by a cap that encloses wiring, microswitch and capacitor. Rotor mounted on greased-for-life and oversized ball bearings to guarantee silence and durability. Built-in thermo-amperometric protection and capacitor permanently inserted in the single-phase version. For the protection of the three-phase motor it is recommended to use a motor protection switch in accordance with the standards. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Dab EvoPlus B 60/220.40 M electronic circulator EVOPLUS circulators they can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as offices, condominiums, hospitals and schools. The EVOPLUS line consists of a complete range of circulators , with a maximum flow rate up to 75.6 m3/h and maximum head up to 18 m3. they are equipped with fl anged ports up to DN 100 in single and twin versions. INTELLIGENT PRODUCT Choosing Evoplus means saving while respecting the environment. Evoplus is an innovative product because it was designed to really improve life: cutting-edge components and electronics guarantee high performance, low consumption and simple and immediate usability. The impact on the environment is significantly reduced, with a real reduction in consumption of over 70% compared to the old circulators. Evoplus: technological intelligence and eco-friendly design at your service. Evoplus: technological intelligence and eco-friendly design at your service Technology and integrated electronics guarantee constant optimization of the operating regime which eliminates waste and lengthens the life cycle of a product designed to last over time. Speed ​​and power are determined by the specific performance request, allowing an action that is always effective and effi cient, personalized in all application contexts. Simple and usable technology Evoplus simplifies the installation, maintenance and control processes, with savings in terms of time and costs which confirm the competitiveness of the entire range. • ease of installation thanks to the elimination of the by-pass in the system • clear and intuitive interface guaranteed by an easy and clear display for viewing the operating status, which favors the practical selection of the regulation mode • constant control ensured by the remote control function which allows interactive, easy and immediate management, at any time and from any location SUSTAINABLE Eco-compatibility is a strategic choice and a mandatory requirement, thanks to the Erp Ecodesign Directive. Evoplus circulators with an efficiency technology oriented towards respect for the environment, today offer a safe change, with a view to sustainable and aware development. The Erp "Eco-design" 2009/125/EC regulation: involves all "energy-related products" and aims in various steps to direct the market towards the diffusion of high-efficiency "intelligent" products. Implementation step of the Regulation: • From 1 August 2015: the EEI limit value will be further lowered to 0.23 also for pumps integrated in heat generators and solar stations. • From 1 January 2020: the validity of the limit value EEI 0.23 will also apply to the replacement of pumps integrated in existing heat generators TECHNICAL DATA Operating range: from 3 to 75.6 m³/h with head up to 18 metres; Liquid temperature range: -10°C to +110°C Pumped liquid: clean, free from solids and mineral oils, non-viscous, chemically neutral, close to the characteristics of water. (glycol max 30%) Maximum working pressure: 16 bar (1600 kPa) Standard flanging: DN 32, DN 40, DN 50, DN 65, PN 6 / PN 10 / PN 16 (4 slots), DN 80 and DN 100, PN 6 (4 slots) Maximum ambient temperature: + 40°C. Minimum head pressure: the values ​​are shown in the relative tables. Special executions on request: DN 80 , DN 100 PN 10 / PN 16 (8 holes) Accessories (Counterflanges): PN 10 DN 32 - DN 40 - DN 50 - DN 65 PN 6 DN 80 - DN 100 Electromagnetic compatibility: EVOPLUS circulators comply with EN 61800-3 standard, in category C2, for electromagnetic compatibility. Electromagnetic emissions: residential environment (containment measures may be required in some cases). Conducted emissions: residential environment (in some cases they can be required containment measures) APPLICATIONS EVOPLUS electronic circulation pumps can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as: - Large residential buildings - Condominiums and blocks of flats - Homes - Clinics and hospitals - Schools - Office buildings - Real estate All models are available in both single and twin versions. Execution with bronze pump body for the recirculation of sanitary water, available in single version with flanged ports DN 32, DN 40, DN 50 and DN 65. Arranged as standard for control via external 0-10 v signal. or PWM and for connection to ModBus plant management systems (LonBus with special optional communication module). It is possible to remotely control the single version thanks to the Dconnect service (with Dconnect Box supplied separately) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: Dab Model: Europro 75M Code: 60189899 Typology: Single-phase Data sheet Operating range: up to 42 m3/h with head up to 22 m. Pumped liquid: clean or slightly dirty water with solid bodies in suspension, long fibers; particularly aggressive water with high percentages of chlorine/bromine and PHMB (Poly Hexamethylene Biguanide) or water treated with chlorine electrolysis process. PH Range: 6.5-8.4 Liquid temperature range: up to 60°C Maximum ambient temperature: 50°C Maximum working pressure: 2.5 bar Nominal operating pressure: 0.8 - 1.2 Bar (ideal 1 Bar) Installation: fixed or portable in horizontal position. Special executions on request: other frequencies and/or voltages Fittings on request: 2"/50 - 63 kit (two fittings + O-ring - see "Accessories") Reference standard: IEC - 60364 Degree of protection of the motor and of the terminal box: IP55 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220/240 V - 50 Hz Description APPLICATIONS High efficiency self-priming centrifugal electric pumps with large capacity built-in pre-filter. Engine completely isolated from water. Extremely silent and highly reliable, developed for the circulation and filtration of water in domestic and residential swimming pools. suitable also in particular applications where the handling of aggressive liquids is required, in fish farms, agriculture and industry. CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump body in glass fiber reinforced technopolymer. Transparent and anti-oxidation polycarbonate pre-filter cover to ensure visibility constant over time. Nylon filter. Impeller in glass fiber reinforced technopolymer, developed to ensure total coverage and insulation of the crankshaft by the pumped liquid. Reinforced technopolymer diffuser. Mechanical seal in carbon / alumina / NBR / AISI 316. Body O-ring pump in NBR, screws and reinforcing ring nuts in AISI 316 steel. Butterfly filler and drain plugs that do not require the use of tools for removal and repositioning. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Continuous service asynchronous motor (S1) with 2 poles with a wide range of powers from 0.5 HP to 3 HP both single-phase and three-phase (see specifications techniques). Motor casing in die-cast aluminum with cataphoresis surface treatment to prevent oxidation even in aggressive environments. Support base supplied as standard with rubber feet to reduce vibrations. Single-phase version with built-in thermo-amperometric protection e permanently inserted capacitor (PSC) and assembled inside the terminal box for all versions. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

TECHNICAL DATA Operating range: from 0.5 to 36 m3 /h Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral, close to the characteristics of water. Liquid temperature range: from 0°C to +40°C Maximum ambient temperature: +40°C Maximum working pressure: PN16 Special executions on request: contact the sales network Degree of protection: IP44 APPLICATIONS Booster sets particularly suitable for domestic use, small systems for civil or industrial use, irrigation systems, washing systems. They stand out for their absolute reliability, simplicity of operation and minimal maintenance. CONSTRUCTION CHARACTERISTICS - COMPONENTS HYDRAULIC PART KVC multistage centrifugal electric pumps. Galvanized sheet metal base complete with 4 anti-vibration rubber feet. Suction and delivery manifolds in AISI 304 steel. Ball valves with union on the suction and delivery of each pump. Suction check valves of each pump. 2 AISI 304 stainless steel caps for closing the manifolds. Radial pressure gauge with shut-off valve. 1 membrane tank 8 liters (optimizes the number of pump starts). ELECTRICAL PART 1 Active Driver Plus module on the delivery of each pump (see hints on Active Driver Plus at the beginning of the paragraph). 1 protection switchboard. MULTI INVERTER SYSTEM WITH ACTIVE DRIVER PLUS The inverter continuously regulates the rotation speed of an electric pump, so as to maintain a constant pressure as the flow rate varies. The other electric pumps, always at variable speed, are inserted in cascade after the first one has reached maximum speed and, by modulating, they compensate for the pressure fluctuations in the system. At each operating cycle, it is possible to set the restart switch to a different pump, so as to ensure uniform use of all the electric pumps. It is also possible to set work times for each pump, with operation switching after the set time. The “SP” pressure can be adjusted by the user using two keys “+” and “-” placed on the AD (as a rule all the pumps are set to the same pressure value). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: IDEA 100 M single-phase Code: 60122483 Power supply: 1 x 230V~50Hz Power: 0.75kW (1HP) Capacitor: 20mF Operating range: flow rate up to 40 l/min (2.4 m3/h) with heads up to 52 metres. Liquid temperature range: from 0°C to +35°C. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics IDEA Peripheral submersible electric pumps DOMESTIC WATER SUPPLY Single-impeller (version 75 and 100) or twin-impeller (version 150) submersible peripheral pump for 4" or larger wells, capable of developing high heads for limited power. Suitable for water lifting and distribution applications in domestic systems, small agriculture, pressurization of autoclave units and hobby applications. General characteristics of the series: Operating range: from 0.4 to 2.4 m3 /h with head up to 52 metres Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral, close to the characteristics of water. Liquid temperature range: from 0°C to +35°C Maximum immersion: 20m Delivery port diameter: 1” GAS Power Tolerance: +6% / -10% Maximum number of starts: 20/h Installation: in 4” or larger wells, tanks and cisterns, in vertical position. Special executions on request: other voltages and/or frequencies. Construction features of the pump Pump body and motor support in cast iron. Impeller in brass. Rotor shaft extension and stainless steel filter. Engine construction features Two-pole asynchronous type submersible built completely in stainless steel, dry and cooled from the outside by the pumped liquid. Stator encapsulated in AISI 304L. Squirrel cage rotor mounted on ball bearings, and oversized to ensure reliability and durability. Mechanical seal in graphite/alumina and lip seal In the single-phase version, the run capacitor is housed in a sturdy, electrically insulated, high-density plastic container. Protection by the user for the three-phase version. Degree of protection: IP68 Insulation class: F Series voltage: - single-phase 230V / 50Hz - three-phase 400V/ 50Hz Power cord: - H07RN-F removable, length 15 meters. - Nylon cord, length 15 meters Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Genix 110 Power supply : 1 x 230V ~ 50Hz P1 Maximum : 490 kW P2 Nominal : 0.32kW ~ 0.44HP Liquid Temperature Range : from 0° to +50 °C Pumped Liquid : Wastewater As Regulated by EN 12050-3 Third party approvals : VDE-GS, LGA, VDE-EMC Capacity : Approved for 6 and 9 liter toilets according to EN12050-3 Protection class : IP44 DAB Genix Automatic Collection and Lifting Station Its use is indispensable in cases where waste water from toilets, showers, washbasins or bidets cannot be expelled by gravity. These lifting stations collect and pump wastewater through a small pipe to the nearest gravity drain. The GENIX models are characterized by the front toilet discharge connection. The GENIX WL version differs from the lateral toilet attachment, specifically designed for applications with wall-hung sanitary ware or when there is not enough space behind the toilet. In the 110 model it is possible to connect, in addition to the toilet, an additional user such as a sink. In the 130 model, in addition to the toilet, three further utilities, such as a sink, shower and bidet. The proposed models are characterized by silent operation, further improved in the Comfort versions. The powerful, reliable pump and nickel-plated stainless steel grinder make the product durable and virtually maintenance-free. Extraordinary maintenance in the event of a blockage is extremely easy, with the possibility of accessing the motor unit from the outside without the need to remove the product, guaranteeing clean and problem-free maintenance. The installation kit is complete with connections that can be adapted to different pipe diameters with quick coupling and integrated non-return valves. An audible flood alarm and an extension adapter tube are available as accessories to adapt the GENIX to pre-existing installations. Construction Characteristics of the Pump Tank in polypropylene loaded with 30% barium. In the soundproofed version, soundproofing in polypropylene loaded with 70% barium. Impeller in PPO 30% glass fibre. Motor shaft in stainless steel. Grinder in nickel-plated stainless steel Construction Characteristics of the Engine Asynchronous type in stainless steel. Shaft and cap in stainless steel. Thermal protection against overheating. Anti-wear crankshaft GENIX is the new DAB shredder, designed to provide the highest level of efficiency in the 3 main phases of its life cycle. Quick installation, comfort of use and simplified maintenance make the GENIX a new point of reference for the creation of a bathroom, where a bathroom you would never have thought was possible Everything you need is standard GENIX is equipped with everything needed for a quick and easy installation. Fittings equipped with non-return valves, clamps, adapters, screws for fixing to the ground, anti-vibration feet and illustrated quick guide. Connect to the site with the QR code and you will be able to see for yourself how easy and immediate installation really is Silent and Reliable Newly developed shredder: robust, durable and reliable  High performance and silent motor Anti-odour system Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Model: DIVER 100 MA single-phase Power supply: 1 x 230V~50Hz Power: 0.75kW (1HP) Capacitor: 20mF Operating range: flow rate up to 80 l/min (4.8 m3/h) with head up to 55 metres. DAB PUMPS  There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics DIVER 5" submersible monobloc multistage electric pumps DIVER electric pumps are used in systems for lifting clear water from wells, first collection tanks or cisterns, Roman wells or streams and are suitable for the distribution of pressurized water in domestic systems, small agriculture, sprinkler irrigation of gardens and vegetable gardens. The pump, particularly silent, used inside wells or tanks avoids all the problems related to suction and deactivation. General characteristics of the series: Operating range: from 0.6 to 12 m3 /h with head up to 96 metres Pumped liquid: clean, without solid or abrasive bodies, non-aggressive Max presence of sand in the water: 50 gr/m3 Liquid temperature range: from 0°C to +35°C Maximum immersion: 20m Delivery port diameter: 1” 1/4 GAS Power Tolerance: +6% / -10% Maximum number of starts: 20/h Motor protection degree: IP 68 Engine protection class: F Installation: in wells, tanks and cisterns, in vertical position. Special executions on request: other voltages and/or frequencies. automatic version with float Construction features of the pump Submersible monobloc multistage pump with the hydraulic part under the motor which is cooled by the pumped liquid. Impellers and diffusers in Noryl reinforced with glass fiber with wear-resistant wear ring in stainless steel. External jacket, stator jacket, upper head with sleeve and closing ring in AISI 304 steel. Encapsulated stator. Cast iron supports. Rotor shaft extension in AISI 304. Motor side lip seal and silicon carbide/silicon carbide mechanical seal on pump side. Engine construction features Two-pole asynchronous type submersible built completely in stainless steel, dry and cooled from the outside by the pumped liquid. Stator encapsulated in AISI 304L. Squirrel cage rotor mounted on ball bearings, and oversized to guarantee silence, reliability and durability. Upon request, the single-phase version is supplied with the CONTROL BOX. Protection by the user for the three-phase version. Automatic version with float available. The version with support base and side suction (DRY) is available on request. Degree of protection: IP68 Insulation class: F Series voltage: single-phase 230V/50Hz three-phase 400V/50Hz Power cord: H07RN-F detachable, length 10 meters. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less