Circulators
DAB Dab Wet Rotor Electronic Circulator Model Evoplus B 120/250.40 M
Dab EvoPlus B 120/250.40 M electronic circulator EVOPLUS circulators they can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as offices, condominiums, hospitals and schools. The EVOPLUS line consists of a complete range of circulators , with a maximum flow rate up to 75.6 m3/h and maximum head up to 18 m3. they are equipped with fl anged ports up to DN 100 in single and twin versions. INTELLIGENT PRODUCT Choosing Evoplus means saving while respecting the environment. Evoplus is an innovative product because it was designed to really improve life: cutting-edge components and electronics guarantee high performance, low consumption and simple and immediate usability. The impact on the environment is significantly reduced, with a real reduction in consumption of over 70% compared to the old circulators. Evoplus: technological intelligence and eco-friendly design at your service. Evoplus: technological intelligence and eco-friendly design at your service Technology and integrated electronics guarantee constant optimization of the operating regime which eliminates waste and lengthens the life cycle of a product designed to last over time. Speed and power are determined by the specific performance request, allowing an action that is always effective and effi cient, personalized in all application contexts. Simple and usable technology Evoplus simplifies the installation, maintenance and control processes, with savings in terms of time and costs which confirm the competitiveness of the entire range. • ease of installation thanks to the elimination of the by-pass in the system • clear and intuitive interface guaranteed by an easy and clear display for viewing the operating status, which favors the practical selection of the regulation mode • constant control ensured by the remote control function which allows interactive, easy and immediate management, at any time and from any location SUSTAINABLE Eco-compatibility is a strategic choice and a mandatory requirement, thanks to the Erp Ecodesign Directive. Evoplus circulators with an efficiency technology oriented towards respect for the environment, today offer a safe change, with a view to sustainable and aware development. The Erp "Eco-design" 2009/125/EC regulation: involves all "energy-related products" and aims in various steps to direct the market towards the diffusion of high-efficiency "intelligent" products. Implementation step of the Regulation: • From 1 August 2015: the EEI limit value will be further lowered to 0.23 also for pumps integrated in heat generators and solar stations. • From 1 January 2020: the validity of the limit value EEI 0.23 will also apply to the replacement of pumps integrated in existing heat generators TECHNICAL DATA Operating range: from 3 to 75.6 m³/h with head up to 18 metres; Liquid temperature range: -10°C to +110°C Pumped liquid: clean, free from solids and mineral oils, non-viscous, chemically neutral, close to the characteristics of water. (glycol max 30%) Maximum working pressure: 16 bar (1600 kPa) Standard flanging: DN 32, DN 40, DN 50, DN 65, PN 6 / PN 10 / PN 16 (4 slots), DN 80 and DN 100, PN 6 (4 slots) Maximum ambient temperature: + 40°C. Minimum head pressure: the values are shown in the relative tables. Special executions on request: DN 80 , DN 100 PN 10 / PN 16 (8 holes) Accessories (Counterflanges): PN 10 DN 32 - DN 40 - DN 50 - DN 65 PN 6 DN 80 - DN 100 Electromagnetic compatibility: EVOPLUS circulators comply with EN 61800-3 standard, in category C2, for electromagnetic compatibility. Electromagnetic emissions: residential environment (containment measures may be required in some cases). Conducted emissions: residential environment (in some cases they can be required containment measures) APPLICATIONS EVOPLUS electronic circulation pumps can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as: - Large residential buildings - Condominiums and blocks of flats - Homes - Clinics and hospitals - Schools - Office buildings - Real estate All models are available in both single and twin versions. Execution with bronze pump body for the recirculation of sanitary water, available in single version with flanged ports DN 32, DN 40, DN 50 and DN 65. Arranged as standard for control via external 0-10 v signal. or PWM and for connection to ModBus plant management systems (LonBus with special optional communication module). It is possible to remotely control the single version thanks to the Dconnect service (with Dconnect Box supplied separately) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.167,00
Grundfos Circolatore a Rotore Bagnato Grundfos UP 20-30 N 150 per Impianti di Acqua Calda Sanitaria Domestici 59643500
Caratteristiche tecniche Modello : UP 20-30 N 150 Codice prodotto : 59643500 EAN : 5708601058745 Performance Potenza massima assorbita : 75 W Liquido pompato : Acqua Range temperatura del liquido : 2° ~ 110° C Temperatura del liquido durante il funzionamento : 60° C Portata nominale : 1,53 m³/h Prevalenza : 1,7 m Classe TF : 95 Interasse : 150 mm Alimentazione (V,Hz,Ø) : 220~240/50/1 Classe di protezione : IP44 Dati installativi Diametro attacco tubazioni : 1 1/4" Pressione nominale della connessione : PN 10 Temperatura ambiente massima : 0° ~ 40° C Temperatura ambiente massima con liquido a 80° C : 40° C Pressione massima di funzionamento : 10 bar Dimensioni e peso Dimensioni (AxLxP) : 15x11,8x12,8 mm Peso : 2,04 Kg Circolatore Grundfos Soluzione efficace e performante per il ricircolo dell'acqua calda sanitaria I circolatori Grundfos UP hanno un corpo pompa in acciaio inossidabile anticorrosione, garantendo così il rifornimento costante di acqua calda in tutte le zone della casa. Questa pompa è progettata per funzionare in modo efficiente, contribuendo così a ridurre i consumi energetici e le spese in bolletta. Grazie alla sua tecnologia avanzata e alla qualità dei materiali, è un elemento essenziale per ottimizzare il funzionamento di qualsiasi impianto di acqua calda. Garanzia prodotto : La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€410,00
DAB Circolatore Elettronico a Rotore Bagnato Dab Modello EVOSTA 2 40 70/130 M230/50-60
Circolatore Elettronico a Rotore Bagnato Dab Modello EVOSTA 2 40 70/130 M230/50-60 EVOSTA 2 DATI TECNICI Campo di funzionamento: 0,4-3,6 m3/h con prevalenza fino a 6,9 metriCampo di temperatura del liquido: da -10 °C a +110°CPressione di esercizio: 10 bar (1000 kPa)Grado di protezione: IPX5Classe di isolamento: FInstallazione: con l’asse del motore orizzontaleAlimentazione di serie: monofase 1x230 V~ 50/60 HzLiquido pompato: Pulito, libero da sostanze solide e oli minerali, non viscoso, chimicamente neutro, prossimo alle caratteristiche dell’acqua (glicole max. 30%) APPLICAZIONI Pompa elettronica a basso consumo energetico per circolazione di acqua in tutti i tipi di impianti domestici di riscaldamento e condizionamento. VANTAGGI EVOSTA 2 è la nuova gamma di circolatori DAB capace di offrire la robustezza del circolatore meccanico abbinata ai vantaggi di quello elettronico. Il motore sincrono a magnete permanente, il convertitore di frequenza, l’indice di efficienza EEI ≤ 0,18 abbinati al grado di protezione IPX5 ed al tappo di sfiato integrato, rendono la famiglia EVOSTA 2 uno dei prodotti migliori della categoria in termini di efficienza e affidabilità. La gamma di circolatori EVOSTA 2 si presta molto bene alla sostituzione dei vecchi circolatori a tre velocità sia per le dimensioni compatte, sia per la completezza offerta in termini di prestazioni. Inoltre è un prodotto in grado di semplificare il lavoro dell’installatore, avendo un unico tasto di settaggio sequenziale, e l’accesso diretto all’albero motore per l’eventuale sbloccaggio. CARATTERISTICHE COSTRUTTIVE Corpo pompa in ghisa con trattamento di cataforesi e motore a rotore bagnato. Cassa motore in acciaio, girante in tecnopolimero. Albero motore in ceramicamontato su bronzine in ceramica lubrificate dal liquido pompato. Camicia del rotore, camicia statore e flangia di chiusura in acciaio inossidabile. Anelloreggispinta in grafite. Anelli di tenuta in EPDM e tappo di sfiato aria in ottone.Grazie alla protezione interna del motore, la pompa non richiede alcuna protezione contro il sovraccarico.PANNELLO DI CONTROLLOLe funzionalità dei circolatori EVOSTA 2, EVOSTA 3 possono essere modificate tramite il pannello di controllo posto sul coperchio del dispositivo di controlloelettronico. La pompa presenta nove opzioni di impostazione che possono essere selezionate con il pulsante MODE.Le impostazioni della pompa sono indicate da sei segmenti luminosi sul display.Il circolatore EVOSTA 3 è dotato di display in grado di visualizzare le seguenti grandezze:- altezza della curva selezionata- assorbimento istantaneo della potenza in Wat- prevalenza istantanea in m- portata istantanea in m3 /h Scheda tecnica ufficiale Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€119,00
DAB Dab Wet Rotor Electronic Circulator Model Evoplus B 120/220 M
Dab EvoPlus B 120/220 M electronic circulator EVOPLUS circulators they can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as offices, condominiums, hospitals and schools. The EVOPLUS line consists of a complete range of circulators , with a maximum flow rate up to 75.6 m3/h and maximum head up to 18 m3. they are equipped with fl anged ports up to DN 100 in single and twin versions. INTELLIGENT PRODUCT Choosing Evoplus means saving while respecting the environment. Evoplus is an innovative product because it was designed to really improve life: cutting-edge components and electronics guarantee high performance, low consumption and simple and immediate usability. The impact on the environment is significantly reduced, with a real reduction in consumption of over 70% compared to the old circulators. Evoplus: technological intelligence and eco-friendly design at your service. Evoplus: technological intelligence and eco-friendly design at your service Technology and integrated electronics guarantee constant optimization of the operating regime which eliminates waste and lengthens the life cycle of a product designed to last over time. Speed and power are determined by the specific performance request, allowing an action that is always effective and effi cient, personalized in all application contexts. Simple and usable technology Evoplus simplifies the installation, maintenance and control processes, with savings in terms of time and costs which confirm the competitiveness of the entire range. • ease of installation thanks to the elimination of the by-pass in the system • clear and intuitive interface guaranteed by an easy and clear display for viewing the operating status, which favors the practical selection of the regulation mode • constant control ensured by the remote control function which allows interactive, easy and immediate management, at any time and from any location SUSTAINABLE Eco-compatibility is a strategic choice and a mandatory requirement, thanks to the Erp Ecodesign Directive. Evoplus circulators with an efficiency technology oriented towards respect for the environment, today offer a safe change, with a view to sustainable and aware development. The Erp "Eco-design" 2009/125/EC regulation: involves all "energy-related products" and aims in various steps to direct the market towards the diffusion of high-efficiency "intelligent" products. Implementation step of the Regulation: • From 1 August 2015: the EEI limit value will be further lowered to 0.23 also for pumps integrated in heat generators and solar stations. • From 1 January 2020: the validity of the limit value EEI 0.23 will also apply to the replacement of pumps integrated in existing heat generators TECHNICAL DATA Operating range: from 3 to 75.6 m³/h with head up to 18 metres; Liquid temperature range: -10°C to +110°C Pumped liquid: clean, free from solids and mineral oils, non-viscous, chemically neutral, close to the characteristics of water. (glycol max 30%) Maximum working pressure: 16 bar (1600 kPa) Standard flanging: DN 32, DN 40, DN 50, DN 65, PN 6 / PN 10 / PN 16 (4 slots), DN 80 and DN 100, PN 6 (4 slots) Maximum ambient temperature: + 40°C. Minimum head pressure: the values are shown in the relative tables. Special executions on request: DN 80 , DN 100 PN 10 / PN 16 (8 holes) Accessories (Counterflanges): PN 10 DN 32 - DN 40 - DN 50 - DN 65 PN 6 DN 80 - DN 100 Electromagnetic compatibility: EVOPLUS circulators comply with EN 61800-3 standard, in category C2, for electromagnetic compatibility. Electromagnetic emissions: residential environment (containment measures may be required in some cases). Conducted emissions: residential environment (in some cases they can be required containment measures) APPLICATIONS EVOPLUS electronic circulation pumps can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as: - Large residential buildings - Condominiums and blocks of flats - Homes - Clinics and hospitals - Schools - Office buildings - Real estate All models are available in both single and twin versions. Execution with bronze pump body for the recirculation of sanitary water, available in single version with flanged ports DN 32, DN 40, DN 50 and DN 65. Arranged as standard for control via external 0-10 v signal. or PWM and for connection to ModBus plant management systems (LonBus with special optional communication module). It is possible to remotely control the single version thanks to the Dconnect service (with Dconnect Box supplied separately) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.013,00
DAB Dab Wet Rotor Electronic Circulator Model Evoplus B 150/250.40 M
Dab EvoPlus B 150/250.40 M electronic circulator EVOPLUS circulators they can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as offices, condominiums, hospitals and schools. The EVOPLUS line consists of a complete range of circulators , with a maximum flow rate up to 75.6 m3/h and maximum head up to 18 m3. they are equipped with fl anged ports up to DN 100 in single and twin versions. INTELLIGENT PRODUCT Choosing Evoplus means saving while respecting the environment. Evoplus is an innovative product because it was designed to really improve life: cutting-edge components and electronics guarantee high performance, low consumption and simple and immediate usability. The impact on the environment is significantly reduced, with a real reduction in consumption of over 70% compared to the old circulators. Evoplus: technological intelligence and eco-friendly design at your service. Evoplus: technological intelligence and eco-friendly design at your service Technology and integrated electronics guarantee constant optimization of the operating regime which eliminates waste and lengthens the life cycle of a product designed to last over time. Speed and power are determined by the specific performance request, allowing an action that is always effective and effi cient, personalized in all application contexts. Simple and usable technology Evoplus simplifies the installation, maintenance and control processes, with savings in terms of time and costs which confirm the competitiveness of the entire range. • ease of installation thanks to the elimination of the by-pass in the system • clear and intuitive interface guaranteed by an easy and clear display for viewing the operating status, which favors the practical selection of the regulation mode • constant control ensured by the remote control function which allows interactive, easy and immediate management, at any time and from any location SUSTAINABLE Eco-compatibility is a strategic choice and a mandatory requirement, thanks to the Erp Ecodesign Directive. Evoplus circulators with an efficiency technology oriented towards respect for the environment, today offer a safe change, with a view to sustainable and aware development. The Erp "Eco-design" 2009/125/EC regulation: involves all "energy-related products" and aims in various steps to direct the market towards the diffusion of high-efficiency "intelligent" products. Implementation step of the Regulation: • From 1 August 2015: the EEI limit value will be further lowered to 0.23 also for pumps integrated in heat generators and solar stations. • From 1 January 2020: the validity of the limit value EEI 0.23 will also apply to the replacement of pumps integrated in existing heat generators TECHNICAL DATA Operating range: from 3 to 75.6 m³/h with head up to 18 metres; Liquid temperature range: -10°C to +110°C Pumped liquid: clean, free from solids and mineral oils, non-viscous, chemically neutral, close to the characteristics of water. (glycol max 30%) Maximum working pressure: 16 bar (1600 kPa) Standard flanging: DN 32, DN 40, DN 50, DN 65, PN 6 / PN 10 / PN 16 (4 slots), DN 80 and DN 100, PN 6 (4 slots) Maximum ambient temperature: + 40°C. Minimum head pressure: the values are shown in the relative tables. Special executions on request: DN 80 , DN 100 PN 10 / PN 16 (8 holes) Accessories (Counterflanges): PN 10 DN 32 - DN 40 - DN 50 - DN 65 PN 6 DN 80 - DN 100 Electromagnetic compatibility: EVOPLUS circulators comply with EN 61800-3 standard, in category C2, for electromagnetic compatibility. Electromagnetic emissions: residential environment (containment measures may be required in some cases). Conducted emissions: residential environment (in some cases they can be required containment measures) APPLICATIONS EVOPLUS electronic circulation pumps can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as: - Large residential buildings - Condominiums and blocks of flats - Homes - Clinics and hospitals - Schools - Office buildings - Real estate All models are available in both single and twin versions. Execution with bronze pump body for the recirculation of sanitary water, available in single version with flanged ports DN 32, DN 40, DN 50 and DN 65. Arranged as standard for control via external 0-10 v signal. or PWM and for connection to ModBus plant management systems (LonBus with special optional communication module). It is possible to remotely control the single version thanks to the Dconnect service (with Dconnect Box supplied separately) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.438,00
DAB Dab Wet Rotor Electronic Circulator Model Evoplus B 150/250.40 M Copy
Dab EvoPlus B 120/280.50 M electronic circulator EVOPLUS circulators they can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as offices, condominiums, hospitals and schools. The EVOPLUS line consists of a complete range of circulators , with a maximum flow rate up to 75.6 m3/h and maximum head up to 18 m3. they are equipped with fl anged ports up to DN 100 in single and twin versions. INTELLIGENT PRODUCT Choosing Evoplus means saving while respecting the environment. Evoplus is an innovative product because it was designed to really improve life: cutting-edge components and electronics guarantee high performance, low consumption and simple and immediate usability. The impact on the environment is significantly reduced, with a real reduction in consumption of over 70% compared to the old circulators. Evoplus: technological intelligence and eco-friendly design at your service. Evoplus: technological intelligence and eco-friendly design at your service Technology and integrated electronics guarantee constant optimization of the operating regime which eliminates waste and lengthens the life cycle of a product designed to last over time. Speed and power are determined by the specific performance request, allowing an action that is always effective and effi cient, personalized in all application contexts. Simple and usable technology Evoplus simplifies the installation, maintenance and control processes, with savings in terms of time and costs which confirm the competitiveness of the entire range. • ease of installation thanks to the elimination of the by-pass in the system • clear and intuitive interface guaranteed by an easy and clear display for viewing the operating status, which favors the practical selection of the regulation mode • constant control ensured by the remote control function which allows interactive, easy and immediate management, at any time and from any location SUSTAINABLE Eco-compatibility is a strategic choice and a mandatory requirement, thanks to the Erp Ecodesign Directive. Evoplus circulators with an efficiency technology oriented towards respect for the environment, today offer a safe change, with a view to sustainable and aware development. The Erp "Eco-design" 2009/125/EC regulation: involves all "energy-related products" and aims in various steps to direct the market towards the diffusion of high-efficiency "intelligent" products. Implementation step of the Regulation: • From 1 August 2015: the EEI limit value will be further lowered to 0.23 also for pumps integrated in heat generators and solar stations. • From 1 January 2020: the validity of the limit value EEI 0.23 will also apply to the replacement of pumps integrated in existing heat generators TECHNICAL DATA Operating range: from 3 to 75.6 m³/h with head up to 18 metres; Liquid temperature range: -10°C to +110°C Pumped liquid: clean, free from solids and mineral oils, non-viscous, chemically neutral, close to the characteristics of water. (glycol max 30%) Maximum working pressure: 16 bar (1600 kPa) Standard flanging: DN 32, DN 40, DN 50, DN 65, PN 6 / PN 10 / PN 16 (4 slots), DN 80 and DN 100, PN 6 (4 slots) Maximum ambient temperature: + 40°C. Minimum head pressure: the values are shown in the relative tables. Special executions on request: DN 80 , DN 100 PN 10 / PN 16 (8 holes) Accessories (Counterflanges): PN 10 DN 32 - DN 40 - DN 50 - DN 65 PN 6 DN 80 - DN 100 Electromagnetic compatibility: EVOPLUS circulators comply with EN 61800-3 standard, in category C2, for electromagnetic compatibility. Electromagnetic emissions: residential environment (containment measures may be required in some cases). Conducted emissions: residential environment (in some cases they can be required containment measures) APPLICATIONS EVOPLUS electronic circulation pumps can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as: - Large residential buildings - Condominiums and blocks of flats - Homes - Clinics and hospitals - Schools - Office buildings - Real estate All models are available in both single and twin versions. Execution with bronze pump body for the recirculation of sanitary water, available in single version with flanged ports DN 32, DN 40, DN 50 and DN 65. Arranged as standard for control via external 0-10 v signal. or PWM and for connection to ModBus plant management systems (LonBus with special optional communication module). It is possible to remotely control the single version thanks to the Dconnect service (with Dconnect Box supplied separately) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.848,00
DAB Dab Wet Rotor Electronic Circulator Model Evoplus B 60/220.40 M
Dab EvoPlus B 60/220.40 M electronic circulator EVOPLUS circulators they can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as offices, condominiums, hospitals and schools. The EVOPLUS line consists of a complete range of circulators , with a maximum flow rate up to 75.6 m3/h and maximum head up to 18 m3. they are equipped with fl anged ports up to DN 100 in single and twin versions. INTELLIGENT PRODUCT Choosing Evoplus means saving while respecting the environment. Evoplus is an innovative product because it was designed to really improve life: cutting-edge components and electronics guarantee high performance, low consumption and simple and immediate usability. The impact on the environment is significantly reduced, with a real reduction in consumption of over 70% compared to the old circulators. Evoplus: technological intelligence and eco-friendly design at your service. Evoplus: technological intelligence and eco-friendly design at your service Technology and integrated electronics guarantee constant optimization of the operating regime which eliminates waste and lengthens the life cycle of a product designed to last over time. Speed and power are determined by the specific performance request, allowing an action that is always effective and effi cient, personalized in all application contexts. Simple and usable technology Evoplus simplifies the installation, maintenance and control processes, with savings in terms of time and costs which confirm the competitiveness of the entire range. • ease of installation thanks to the elimination of the by-pass in the system • clear and intuitive interface guaranteed by an easy and clear display for viewing the operating status, which favors the practical selection of the regulation mode • constant control ensured by the remote control function which allows interactive, easy and immediate management, at any time and from any location SUSTAINABLE Eco-compatibility is a strategic choice and a mandatory requirement, thanks to the Erp Ecodesign Directive. Evoplus circulators with an efficiency technology oriented towards respect for the environment, today offer a safe change, with a view to sustainable and aware development. The Erp "Eco-design" 2009/125/EC regulation: involves all "energy-related products" and aims in various steps to direct the market towards the diffusion of high-efficiency "intelligent" products. Implementation step of the Regulation: • From 1 August 2015: the EEI limit value will be further lowered to 0.23 also for pumps integrated in heat generators and solar stations. • From 1 January 2020: the validity of the limit value EEI 0.23 will also apply to the replacement of pumps integrated in existing heat generators TECHNICAL DATA Operating range: from 3 to 75.6 m³/h with head up to 18 metres; Liquid temperature range: -10°C to +110°C Pumped liquid: clean, free from solids and mineral oils, non-viscous, chemically neutral, close to the characteristics of water. (glycol max 30%) Maximum working pressure: 16 bar (1600 kPa) Standard flanging: DN 32, DN 40, DN 50, DN 65, PN 6 / PN 10 / PN 16 (4 slots), DN 80 and DN 100, PN 6 (4 slots) Maximum ambient temperature: + 40°C. Minimum head pressure: the values are shown in the relative tables. Special executions on request: DN 80 , DN 100 PN 10 / PN 16 (8 holes) Accessories (Counterflanges): PN 10 DN 32 - DN 40 - DN 50 - DN 65 PN 6 DN 80 - DN 100 Electromagnetic compatibility: EVOPLUS circulators comply with EN 61800-3 standard, in category C2, for electromagnetic compatibility. Electromagnetic emissions: residential environment (containment measures may be required in some cases). Conducted emissions: residential environment (in some cases they can be required containment measures) APPLICATIONS EVOPLUS electronic circulation pumps can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as: - Large residential buildings - Condominiums and blocks of flats - Homes - Clinics and hospitals - Schools - Office buildings - Real estate All models are available in both single and twin versions. Execution with bronze pump body for the recirculation of sanitary water, available in single version with flanged ports DN 32, DN 40, DN 50 and DN 65. Arranged as standard for control via external 0-10 v signal. or PWM and for connection to ModBus plant management systems (LonBus with special optional communication module). It is possible to remotely control the single version thanks to the Dconnect service (with Dconnect Box supplied separately) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.377,60
ELETTROPOMPE LOWARA Lowara Electronic Circulator Pump Connection 1"1/2 Pipe Connection 1" Model Ecocirc 25-6/130 With Anti-block Technology Code 605008250
General characteristics Brand: Lowara Code: 605008250 Model: Ecocirc 25-6/130 Data sheet Anti-Blocking Technology: Yes Pump Connection: 1"1/2 Pipe Connection: 1" Technology type: Spherical rotor Pump body length (mm): 130 Power Type: Wired Cable length: 2 meters Continuous fixed speed: Yes Automatic Proportional Pressure Control: Yes Description High efficiency circulators for domestic heating Lowara ecocirc High efficiency pumps with ECM technology and permanent magnet rotor for applications such as radiant heating (single and two pipe systems), underfloor and surface heating, boiler feed, solar stations and similar applications; Shaftless spherical motor, maintenance-free, magnetite-resistant anti-blocking technology, switchable control options (manual or automatic continuously variable differential pressure), cataphoresis-coated cast iron pump housing, LED operating indicator, pre-wired power cable from 2 meters, automatic air vent mode;
€158,86