Technical features Energy label specifications according to the European ErP directive   Sanitary Energy Efficiency : Class A Load profile: M Exercise features: Open chamber with natural draft Ignition - 1.5 battery Flame control - by ionization Rated thermal power: 19kW Hot water production Δ T=25°C: 11 l/min Min/max pressure bar 0.3/10 Ø water and gas connections - 1/2” Dimensions (HxLxP): mm 580 x 310 x 215; 9.5 kgs The guarantee is the Official Beretta Italia one, and has a duration of 24 months Power supply: METHANE General characteristics SOURCE 2 DGT Fonte 2 DGT, hot water in compact dimensions From Beretta's experience and technological research comes the new line of Fonte 2 DGT water heaters, designed to offer maximum sanitary comfort, maximum energy savings and greater simplicity of use. Thanks to its extremely compact dimensions, Fonte 2 DGT can also be placed in limited spaces and therefore represents the ideal solution to meet the installation needs of modern living contexts. The range, open ionization chamber with battery ignition, two water filters as standard and with codes for both methane and LPG, is made up of the Fonte 2 DGT versions with 11 and 14 litres/min models and Fonte 2 DGT FLEX with a from 11 litres/min. The FLEX versions also include the hoses and the sanitary tap. Source 2 DGT: high energy class and low consumption The Fonte 2 DGT line of water heaters is equipped with the special device known as the Economiser, specifically designed to combine maximum user comfort with significant energy and cost savings. The activation of the Economizer in fact allows to reduce the gas consumption up to over 50%, limiting the maximum thermal power supplied, when the usage requirements are contained (low temperature difference or reduced sampling flow rates, such as for example during summertime). Furthermore, on all Fonte 2 DGT models, the Economizer can be adjusted progressively by the user, according to needs, achieving maximum savings in the low flame position. Finally, the appliances in the Fonte 2 DGT range are equipped with flame modulation which, by adapting gas consumption to individual withdrawal requests, allows the temperature of the water supplied to be kept almost constant, compatibly with the settings made and the power of the water heater. The Beretta Fonte 2 DGT water heater guarantees always very low gas consumption and respect for the environment. Beretta Fonte 2 DGT complies with the current ERP regulation placing itself in CLASS A for energy consumption. Functionality and ease of use The Fonte 2 DGT water heaters, with a linear and essential design, have an ergonomic dashboard which houses two knobs which allow you to manage all the functions of the appliance in a simple and intuitive way and a display which shows the temperature of the domestic hot water produced. The left knob, in addition to the on/off functions, activates the "Gas economizer" device, which can be adjusted between the small flame and the large flame, allowing the user to make interesting gas savings. The right knob allows you to set the temperature of the water supplied, by regulating the quantity of water at the outlet Characteristics: Instantaneous open chamber water heater with Natural Gas and LPG versions Abundant production of domestic hot water: 11 or 14 litres/min Digital display with indication of domestic hot water temperature Battery ignition and ionisation flame presence control Gas economizer with 8 regulation steps Modulating flame regulation system Simple and intuitive control panel Compact size and simple installation without removing the shell Assembly template supplied (gasket and hose holder for LPG versions) New easy access water connections on the same horizontal axis New latest generation water/gas group with integrated gas pressure regulator Double inlet water filter Safety microswitch to protect the batteries (2 x 1.5 Volt type D) in the OFF position Temperature selector FLEX versions with flexible fittings and standard tap Beretta is “ERP”. The concrete commitment towards an eco-sustainable future The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with a nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Characteristics: Class A heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile: XL Heating / domestic hot water nominal heat input kW 20/28 Heating / domestic hot water reduced heat input kW 2.80 Supply voltage/frequency: 230/50 Volt/Hz NOx Class 5 Supply voltage / frequency Volt/Hz 230/50 Boiler dimensions (HxLxP) mm 780x400x365; 36 Gas version available: METHANE Warm-up exercise: Maximum pressure and temperatures bar / °C 3 / 90 Expansion vessel capacity 9 litres Healthcare exercise: Minimum / maximum pressure 0.2 - 6 bar Quantity of hot water with Δt =25° litres/min 16.1 Minimum domestic water flow rate litres/min 2 To view further technical information on the product CLICK HERE The new MySMART condensing boiler is designed following the ecodesign indications provided for by the European ErP Directive. MySMART has a higher power in DHW mode thus offering greater comfort. The boiler, an instantaneous combined model, offers as standard the new front access condensing exchanger with improved efficiency (94% seasonal efficiency) and the low consumption FLEX modulating circulator with modifiable head up to 7m. MySMART is compatible with the new Ø 50 mm flue with which it is possible to carry out ducting up to 7m. The BeSMART Comfort Control is inserted as standard with MySMART with the WiFi Box, the external probe, the flue splitter, the plumbing fittings cover, the template, the heating taps with filter, the brass plumbing fittings, the gas taps and sanitary. It forms a class A + system without the addition of options BeSMART WiFi Comfort control included as standard Available APPs for management from Smartphone and Tablet Very high modulation (up to 1:10) Flex low consumption circulator (EEI ≤ 0.20 ) with 6m head adjustable to 7m Possibility of ducting with the special flue in PP Ø 50 Standard ø 80 mm splitter General characteristics BeSMART the advanced comfort control Leaving for your home in the mountains? Or returning from a business trip? Through your Smartphone or Tablet, with the BeSMART App you can turn the boiler on and off, read the home and outside temperature and change the time programming of your heating system. The BeSMART WiFi Comfort Control Panel, standard in the MySMART boiler, is the remote boiler management device with chronothermostat functions. With the WiFi Box kit (series) it is possible to manage comfort even remotely with a Smartphone and Tablet. Simple and intuitive, it allows you to adjust the parameters and activate the many functions on the boiler. A large liquid crystal display shows all important information. Using the keys, the temperature of the heating water and domestic hot water is set easily and intuitively and the time programming is carried out. MySMART also features the Easy Climate function (thermoregulation with standard external probe). MySMART, the elegant The new MySMART boiler is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to easily select all the functions necessary for using and setting the boiler. OTHER CHARACTERISTICS: Telemanagement : Remotely, with BeSMART, you can turn the boiler on and off, change the temperatures, program the weekly chronothermostat, view the home temperature. Management with tablets and smartphones : Compatible with smartphones and tablets using the Android (≥ 3.0 ver.) or iOS system. Downloadable Apps: Available APPs compatible with Android (≥ ver. 3.0) and iOS systems for switching on/off and managing boilers/systems remotely via Smartphone and Tablet. WiFi : WiFi communication between the WiFi Box and the home ADSL WiFi modem router to connect to the internet. Possibility to connect to the optional WiFi modem kit for SIM CARD as an alternative to the ADSL modem. RF : RF (radio frequency) communication between the BeSMART Comfort Control and the WiFi Box; Possibility of connecting up to 8 BeSMART Comfort Controls in RF to manage up to 8 different zones/environments (wireless communication up to 40 m away). Weekly heating time programming : Heating time programming in 30 minute intervals and possibility to choose between different pre-set programs. Holiday function: For quick entry of the number of holiday days in which to operate the generator in order to have a reduced room temperature. The acronym ErP, an acronym for "Energy related Products", identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015, the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class. Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility of easily identifying the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with a nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Beretta's commitment is concrete and is directed towards an increasingly eco-sustainable future. This is why Beretta is already ErP-Ready today with solutions for any installation and comfort requirement linked to autonomous residential and centralized systems. A complete and constantly evolving catalog with many ErP-Ready proposals in the case of mere replacement, energy redevelopment, renovation or new construction. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features CNG code: 20095434 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Seasonal heating efficiency % 93 Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 20/25 kW Nominal heating thermal power: 19.50 kW Classification European Directive EEC 92/42: **** Efficiency at rated power: 97.5% Efficiency at reduced load (30%): 102.2% Max electric power heating Watt 69 Electrical protection degree IP X5D Expansion tank capacity 8 litres Quantity of hot water with Δt=25°C: 14 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 715x405x248 ; 28kg METHANE power supply   Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control). General characteristics HELLO GREEN ErP Ciao Green: high energy efficiency, low gas consumption and low emissions. The entry into force of the European ErP Directive (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Mandatory labeling provides greater transparency on the characteristics of products that can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2) by 20%, increasing by 20% the use of renewable energies and reduce energy consumption by 20% in EU countries. Condensing exchanger The innovative Beretta compact aluminum condensing exchanger is assembled with a brazing production process in a controlled atmosphere. In addition to allowing a more uniform distribution of heat, aluminum offers a high resistance to corrosion for the benefit of a longer duration over time. Aluminum is also chosen for its lightness, excellent conductivity, mechanical resistance, reliability and recyclability. The condensing exchanger makes it possible to recover a large part of the heat from the fumes by reducing losses in the chimney, and a large part of the latent heat, reaching a four-star energy efficiency value (according to European Directive EEC 92/42). The premix burner optimizes the combustion mixture by reducing NOx emissions to values ​​that place the boiler in Class 5, the highest according to the European Directive EN 677. Universal installation Ciao Green is designed to be installed outdoors in partially protected places or recessed thanks to the dedicated accessories and board anti-freeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit together with the siphon antifreeze heater kit. If the boiler is installed outside, without embedding, the lower cover is required for greater protection. The management The electronic panel is the brain of boiler management. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. A liquid crystal display and LEDs provide information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function. Characteristics: ErP boilers with synchronous modulating pump with low energy consumption (EEI≤0.20) Designed according to the ecodesign indications provided for by the European ErP Directive Energy Class > heating (class A) > DHW profile XL (class A) Seasonal heating efficiency 93% Aluminum condensing exchanger, two versions of 25 kW and 29 kW combined and one 25 kW heating only Designed following the ecodesign indications of the European ErP Directive Class 5 according to the UNI EN 483 European Standard It can also be installed externally and recessed through the adoption of special kits (optional) Display for viewing temperature and diagnostic codes IPX5D electrical protection degree Prepared for connection to the remote control (optional) Standard thermoregulation (optional external probe) Plumbing fittings, gas and sanitary taps (optional) Antifreeze kit available up to -10°C (optional) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NEW EXCLUSIVE EXCLUSIVE, A NEW STORY BEGINS. Through the innovative ACC electronic injection combustion, HYBRID READY integration and the new project design, EXCLUSIVE offers exclusive advantages in every installation variation. From the new EXCLUSIVE, A NEW STORY BEGINS. construction, redevelopment; from hybrid application in a multi-energy system to simple single installation, EXCLUSIVE represents the current and winning choice for those who are not satisfied and want to look beyond.   Characteristics: Electronic injection combustion via ACC system EXCLUSIVE plus only the BeSMART Wi-Fi Comfort Control (optional) forms a class A+ system 94% (ETAs) of energy efficiency in heating Universal installation : Indoor, outdoor and recessed installation. IPX5D electrical protection degree Tempozero installation: Removing the casing NO longer necessary for electrical connections and calibration Low consumption modulating circulator (EEI≤ 0.20) 6 m head, electronically modifiable up to 7 m Hydraulic connections and external probe available as options Frost protection down to -5 °C as standard HYBRID READY boiler , Can be integrated via BUS in a multi-energy system to make boiler operation more effective in relation to other energy sources (can be combined with a Beretta hybrid system using the REC 10H interface available as an accessory) Talking display: User interface for direct communication using TEXT and ICONS Self-adapting: The boiler automatically adapts to different types of gas and installation - ZERO calibrations CO alarm Boiler CO level constantly monitored and calibrated for maximum safety Small size: Thanks to its compactness, EXCLUSIVE can also be easily installed in a wall unit LPG version selectable from parameter Gas transformation kit not necessary Europe strategy With the opening towards the management of multi-energy plants, the reduction of emissions and the optimization of consumption, Beretta signs with EXCLUSIVE the highest contribution in terms of respect for the environment, in view of the 20-20-20 objectives of the Union countries expected by 2020, reconfirming their commitment to an increasingly eco-sustainable future.        Exclusive: a milestone in the evolution of Beretta Combustion and electronics, i.e. the heart and brain of EXCLUSIVE, entirely designed in the Research and Development Laboratories of the historic Lecco headquarters, mark a turning point in Beretta's mural evolution and are the result of the spirit of innovation that has distinguished the brand since its origins. With EXCLUSIVE, the novelty of the project fits perfectly into the tradition of know-how and takes on a linear design, which reworks some aesthetic lines of the first boiler models in a modern key, in perfect continuity of style. Continuity that is also manifested in the re-proposition of the EXCLUSIVE name, which has always characterized the top of the Beretta range, with exclusive features and advantages. Class A+ system using only the BeSMART WiFi Comfort Control (optional) .   "talking" interface The control panel is one of the distinctive elements of EXCLUSIVE which confirms its innovative profile. In fact, there are many EXCLUSIVE functions, all to be discovered, through a modern 3.5” backlit LCD display, which communicates with the user through texts and icons. By means of the intuitive silk-screened operating keys it is also possible to access the settings and parameterizations of the boiler and the system. GREEN GEM OF EXCLUSIVE: LED light bar that signals the current operating status of the boiler, reflecting on the casing even with the door closed.   Exclusive Features: HOURLY PROGRAMMING : Programmable heating by hour and by single zone INTELLIGENT SYSTEM FILLING Autonomous filling activation and total safety SYSTEM PRESSURE Displayed DATE AND TIME Display as screensaver PREHEATING Domestic hot water preheating activation SCHEDULED MAINTENANCE Intelligent system that warns the user when boiler maintenance is due   Everywhere Exclusive: Thanks to BeSMART, Beretta's WiFi Comfort Control, controlling and managing home comfort is now possible wherever you are, through a simple and intuitive App, via smartphone and tablet. EXCLUSIVE is compatible with all BeSMART functions, even the most advanced. From home heating professionals, easy management of home comfort. Even away from home   Electronic injection combustion The ACC system, designed and developed by Beretta, allows in all circumstances to offer "first class" functionality, efficiency and low emissions. Using a sensor for detecting the flame ionisation current, which allows the electronics to continuously modulate the quantity of fuel injected, the system keeps the air/gas mixture constant at optimal values ​​over the entire modulation range of the delivered power. Thanks to the ACC system, combustion adjusts itself, thus eliminating the need for any calibration and allowing the boiler to operate with different gas compositions. Particular attention is paid to CO emissions, through a self-diagnosis that intervenes on the burner before the emission threshold allowed by the legislation is exceeded. [A] Cylindrical burner in stainless steel [B] Integrated electronic card [C] Traditional ga valve with modulator [D] Modulating fan with Hall effect     Hybrid Ready EXCLUSIVE is a HYBRID READY solution. The boiler was born as a fundamental element of the offer of HYBRID READY products, which constitute the new hybrid technology system conceived and developed in the Beretta Research Laboratories. This system, created to meet the current and future needs of integration and governance of the various energy sources (Gas/Electricity/Renewables), also includes the most innovative methods of energy accumulation and distribution. EXCLUSIVE, AS A HYBRID READY SOLUTION, IS THE IDEAL CHOICE FOR THOSE WHO WANT TO LOOK AHEAD AND INVEST IN A PRODUCT WHICH WILL MAINTAIN ITS ITS VALUE UNCHANGED OVER TIME. Thanks to the new communication BUS with which it is equipped, EXCLUSIVE is able to interact perfectly with the Energy Manager REC 10H, a real thinking brain that constantly monitors the hybrid system created, to always offer the best comfort in an efficient and effective way. The Beretta hybrid, distinguishing itself for its modular approach to the world of multi-energies, is therefore able to offer increasingly tailored comfort and to evolve over time, with the inclusion of new components that increase efficiency   Beretta is “ERP”. The concrete commitment towards an eco-sustainable future   The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU.  The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands.   In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with a nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency.   Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS   FREE FIRST START-UP Technical features Model : HYDRO UNIT M 012 Product code : 20191954 Optional REC10MH control Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35°C: 4.95 Heating COP with water set at 45°C: 3.70 Heating COP with water set at 55°C: 3.05 EER cooling with water set at 7°C: 3.95 EER cooling with water set at 18°C: 2.75 Performance   Heating Useful power in heating with water set at 35° C: 12.10 kW Useful power in heating with water set at 45° C: 12.30 kW Useful power in heating with water set at 55° C: 11.90 kW Cooling down Useful power in cooling with water set at 7 °C: 11.50 kW Useful power in cooling with water set at 18 °C: 12.0 kW Sound data Sound power : 65 dB(A) Sound pressure : 53 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Dimensions and weight Dimensions (LxHxP): 1385x945x526 mm Empty weight: 144.0 kg Beretta HYDRO UNIT M Inverter Monoblock Air-Water Hydronic Heat Pumps These units are used for both heating and cooling applications as well as domestic hot water tanks. They can be combined with fan coil units, underfloor heating applications, low temperature high efficiency radiators, domestic hot water tanks and solar kits, all of which are field powered. A wired controller is supplied with the unit. The backup heater, available as an accessory, can increase the heating capacity in cold outside temperatures. The backup heater also serves as a backup in the event of a malfunction and as a freeze protection of the outdoor water pipes during the winter. Efficiency and sustainability The heat pumps of the HYDRO UNIT M series use R32 as the refrigerant gas, a gas with a lower Global Warming Potential than the traditional gases used. The design of a new sealed circuit for fluorinated gases, the use of R32, reduced load volumes, lower CO2 emissions and increased energy efficiency are the characteristics that differentiate HYDRO UNIT M and increase its sustainability environmental. Quietness The low noise level is guaranteed by the constructive features used and can be further reduced thanks to the silent mode programming, available to the customer Antifreeze function The HYDRO UNIT M heat pump is foreseen for outdoor installation and equipped with the ANTIFREEZE function for the protection of the entire hydraulic circuit. This customer-programmable function activates automatically whenever the water temperature in the system drops below a pre-set value, ensuring the protection of the entire system Better performance The ten models available offer powers from 4 kW to 16 kW , with fast response to requests and reduced energy consumption which guarantee energy class A+++ up to 35°C and A++ up to 55°C HP KEYMARK Certified The design meets the requirements of the voluntary European HP KEYMARK certification Easy and flexible Installing HYDRO UNIT M is easy thanks to the hydronic kit that comes with the monobloc and which contains all the essential components. HYDRO UNIT M is flexible thanks to its ability to respond quickly to the real needs of the environments to be served Functional elements Beretta Hydro Unit M Inverter Control Board Maximizes power under critical load conditions and provides stability and efficiency at part loads AISI 316 steel plate heat exchanger : protected with closed cell anti-condensation insulation, it offers high heat exchange efficiency Control board Operating parameters constantly analyzes the ambient temperature and the water temperature to activate the different components and meet the demand Hydronic module Including low consumption circulator, expansion vessel, automatic vent valve and safety valve Electronic expansion valve Optimizes the flow of the refrigerant fluid in every situation Twin rotary compressor Inverter System design including DC twin rotary compressor, fan motor and pump ensures precise control of motor speed for the right power needed to perfectly match the actual load and save energy Fan Special design of the blade and its edge that allows optimizing the flow surface, improving efficiency and reducing fan noise Heat exchange coil With extended surface and aluminum fins Install more Hydro Unit M HYDRO UNIT M offers the possibility of connecting up to six units to each other for the heating, cooling and domestic hot water needs of small condominiums and light commercial contexts. Each of the units responds individually to the demands of the environment in which it is installed Easily manage the plant Advanced remote control This module, present in every HYDRO UNIT M installation, has a multilingual display and allows you to: Manage up to six units connected in cascade Activate the programmed functions such as the Antifreeze function and the Vacation function, for the serenity of the family REC10MH management module Designed for full-electric and hybrid applications, this module is installed inside the home and allows the user to easily manage the entire system. If the system is equipped with a Hybrid distribution system, REC10MH allows you to manage the multi-zone system to optimize the operation of the system. The module is equipped with a color display and a multilingual menu USB Each HYDRO UNIT M is equipped with a USB port to connect the USB flash memory to update the unit firmware Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less