Beretta CIAO X 30 C low NOx 6 condensing boiler complete with flue exhaust kit - NEW ErP cod. 20197876 Technical features Code: 20197876 Energy label specifications according to the European ErP directive Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Heating thermal capacity (max-min) 25.0 - 3.95 kw Nominal DHW heat input (max-min) 30.0 - 3.95 kw Supply voltage V-Hz 230 - 50 IP degree of protection IPX5D NOx class 6 HEATING Max pressure-temperature bar-°C 3-90 Membrane expansion vessel l 8 SANITARY Max pressure bar 8 DHW production at ?T= 25 °C / 30 °C / 35 °C l/min 17.2/14.3/12.3 Minimum DHW flow l/min 2 DIMENSIONS, WEIGHT Boiler dimensions (HxWxD) mm 700x400x275 HELLO X, the comfort you deserve CIAO, ONE OF THE BEST-SELLING WALL-MOUNTED BOILERS EVER IN THE BERETTA PORTFOLIO, HAS BEEN COMPLETELY REDESIGNED, CREATING A NEW CONDENSING RANGE WITH MANY INNOVATIVE FEATURES AND ADVANTAGES: CIAO X The new Beretta range retains the distinctive characteristics of the previous models of the same name in terms of reliability and ease of use, adding many other important and innovative features: from the new primary heat exchanger in stainless steel , to the innovative touchpad interface up to the DIN standard hydraulic connections. With CIAO X, Beretta enhances the search for comfort and innovation with respect for the environment, which represents one of the strengths of the brand, starting from its origins. This renewed energy awareness translates into high efficiency, low consumption and a high modulation ratio (1:8), which combined with installation flexibility, compact dimensions and low weight, allow CIAO X to be placed at the top of its category. But there's more. HELLO X looks forward to future generations. The new range can already process a mixture of hydrogen up to 20%, the source of sustainable energy that will be the real ecological turning point in the coming years THE RANGE Ciao X is available in a complete range of 5 models, to meet the various needs of heating: CIAO X 25 C (combined, with dedicated codes for methane and LPG) CIAO X 30 C (combined) CIAO X 15 R (heating only) CIAO X 25 R (heating only) The compact dimensions and low weight of CIAO X allow it to be installed practically anywhere in the home, even in a wall unit in the kitchen. The product can also be installed outside the home (recessed in a BOX or in a partially protected place). CHECK YOUR COMFORT WITH A TOUCH One of the distinctive features of the new CIAO X is the digital touchpad interface, which combines design and innovation with ease of use. With a simple touch on 7 points of the panel, you can intuitively access all the settings and the boiler and system parameters. Each touch activates a buzzer, which generates acoustic feedback to confirm the operation. The LCD display communicates with the user and the installer through icons, without using texts, in order to allow an immediate understanding of the displayed function. EVERYWHERE HELLO X The soft and essential lines of the innovative touch control give CIAO X a modern and pleasant character, which facilitates integration into any context. The compact dimensions and low weight allow the boiler to be easily installed practically everywhere, not only inside the home, but also outside (recessed in a box or in a partially protected place). CIAO X is therefore ideal for replacing old boilers, both with DIN and Beretta connection sequences, thanks to the availability of accessory kits that simplify conversion. A wide range of accessories completes the CIAO X offer: flue kits, compact water filters (softener and magnetic) and cover of the hydraulic connections, facilitating their installation and harmonizing their integration, both indoors and outdoors. NEW STAINLESS STEEL CONDENSING EXCHANGER CIAO X is equipped with a new primary exchanger in stainless steel , with a smooth tube with a large section, to ensure excellent efficiency and cleanliness over time. Stainless steel, in addition to the high resistance to the corrosive action of acid condensate, prevents the internal formation of oxides and other electrochemical phenomena typical in installation on old systems. The single wrapped coil geometry (hydraulic circuit in series) ensures constant flow in all sections of the exchanger and intrinsically prevents clogging phenomena. Front access facilitates periodic maintenance and cleaning of the combustion chamber NEW FUNCTIONS FOR GREATER COMFORT IN SANITARY In the combined models, the high-performance plate exchanger, connected to the primary hot water circuit, allows domestic hot water to be heated instantaneously, without the need for an external boiler. The new sanitary exchanger has been optimized by Beretta to obtain high performance and maximum comfort for the end user in terms of temperature stability and reduced waiting times. These pluses, which place CIAO X at the top of the reference category, ultimately translate into water and energy saving, for greater respect for the environment. Here are some of the special functions of CIAO X: The PREHEATING function and its evolution in PREHEATING SMART have been designed to further reduce water and gas consumption. In fact, these functions make it possible to keep the water warm inside the new high-efficiency plate exchanger, produced in our factories, while reducing waiting times. The TOUCH & GO function allows you to activate instant pre-heating, only for a specific request. Other special functions such as DOMESTIC DELAY, ANTI-OSCILLATION, SMART FAN allow to improve the performance of the boiler in particularly difficult operating conditions, such as for example in the case of very low or very high inlet water temperature, or a very shallow water HI, COMFORT YOUR COMFORT AT YOUR FINGERTIPS CIAO X* IS COMPATIBLE WITH HI, COMFORT, THE NEW IOT SOLUTION PLATFORM BY BERETTA, WHICH ALLOWS TO MANAGE COMFORT IN A SIMPLE AND INTUITIVE WAY The end user can manage the home climate with the traditional HI, COMFORT T100 thermostat control, via the new HI, COMFORT App, which can be connected to the thermostat via the Wi-Fi box. The new App can be downloaded free of charge for Android and iOS systems and allows you to monitor the status, remotely set the domestic hot water temperature and define the boiler settings in a simple and safe. Furthermore, installing HI, COMFORT T100 is quick and easy and, in case of replacement of an old thermostat, does not require interventions on the electrical system of the house. HI, COMFORT T100, battery powered, also allows "wireless" installation, if the system is equipped with a radio frequency receiver SMART KEY K100 The new CIAO X range was created ready for the K100 Smart Key, an accessory designed for the latest generation Beretta condensing boilers, which marks their evolution towards increasingly eco-sustainable comfort. The Smart Key K100, through the App proprietary HI, COMFORT, allows you to know the operating status of the boiler, change its parameters and much more, all remotely. The various functions of the Smart Key K100 are certainly of interest to the user: from the "Bottle Function", to protect children and non-self-sufficient users from the risk of burns, to the "Booster Function", to maximize speed heating the environment, up to the "Wellness Function", to maintain a constant hot water temperature for maximum comfort and much more, all to be discovered. And for users who are increasingly attentive to the environment, it is possible, through the HI, COMFORT App, to monitor and manage the use of energy in their heating system, saving up to 15%* of consumption and avoiding unnecessary waste. For a sustainable future CIAO X is born ready to work with mixtures of natural gas and hydrogen - up to a maximum of 20% - a first important step towards achieving the objectives of environmental sustainability and the path of decarbonization initiated by the European Union. Availability in huge quantities Producibility using low-impact methods and in a sustainable way from renewable sources, such as wind energy, photovoltaics and biomass Reduction of polluting emissions in the percentage relative to its use Real opportunity for change to start the decarbonization process, fight global climate change, improve air and life quality Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta EXCLUSIVE X 30 C low NOx condensing boiler complete with flue gas exhaust kit 20187795 Methane Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Declared load profile XL Characteristics of heating/DHW operation: Heating thermal capacity (max-min) kW 25 - 4.9 Nominal DHW heat input (max-min) kW 30 - 4.9 NOx class 6 IP X5D degree of protection Supply voltage V-Hz 230 - 50 Max pressure-temperature bar-°C 3 - 90 Max pressure bar 8 Boiler dimensions (HxPxL) mm 740x350x470 EXCLUSIVE X EXCLUSIVE X, with 5 models (3 of which combined and 2 'heating only'), from 25 to 35 kW of power, is able to best satisfy the multiple installation needs: from new buildings to redevelopment, from single installation to application hybrid in multi-energy system. Thanks to the ACC Combustion system, each model self-adapts to different types of gas, without the need for "dedicated" codes for methane, LPG and propane air(*), or gas conversion kits EXCLUSIVE X , TECHNOLOGY FOR A GREEN LIFESTYLE From the R&D laboratories of Beretta comes EXCLUSIVE X, the new condensing boiler that marks a further step in the evolution of the EXCLUSIVE range, whose name has always characterized the top of the brand's wall-mounted offer. Combustion and electronics, which represent the heart and brain of the boiler, have been entirely redesigned to offer an even more performing and responsive product to the European objectives of environmental sustainability. EXCLUSIVE X is the ideal choice for those who are not satisfied and are looking for green solutions. EX CLUSIVE INNOVATION The new stainless steel exchanger, the innovative electronics with hybrid function integrated in the boiler, without external remote controls, and the ability to process mixtures of natural gas and hydrogen up to 20% give EXCLUSIVE X a highly technological profile, ensuring maximum energy saving, which translates into an economic advantage for the user . EXCLUSIVE PERFORMANCE EXCLUSIVE X represents the spearhead of the Beretta offer. Thanks to the new optimized plate heat exchanger , the range achieves sanitary performance at the top of the category in terms of efficiency, temperature stability and waiting times. The refined ACC electronic combustion system, which allows the quantity of fuel delivered to be continuously modulated, offers “best-in-class” efficiency and functionality in all circumstances, reducing harmful emissions to a minimum. EXCLUSIVE BERETTA The new range represents the synthesis of Beretta's advanced research, in continuity of style with the best tradition of the brand. Continuity that manifests itself both in the aesthetics of the product, which takes up the lines of the first Beretta boiler models, reinterpreting them in a modern key, and in the simplicity of use and installation flexibility, among the distinctive features of the brand, which have always been appreciated by the market A NEW HEART OF STEEL EXCLUSIVE X is equipped with a new primary exchanger in stainless steel , with a smooth tube with a large section, to ensure the best efficiency and cleanliness over time. Stainless steel, in addition to the high resistance to the corrosive action of acid condensate, prevents the internal formation of oxides and other electrochemical phenomena typical in installation on old systems. The geometry with a single wound coil (hydraulic circuit in series) guarantees constant flow in all sections of the exchanger and intrinsically prevents phenomena of clogging. Front access facilitates periodic maintenance and cleaning of the combustion chamber. COMBUSTION WITH ELECTRONIC INJECTION The ACC system, refined by Beretta for the EXCLUSIVE X , allows in all circumstances to offer functionality, efficiency and low emissions that are “first in class”. Using a sensor for detecting the flame ionization current, which allows the electronics to continuously modulate the quantity of fuel injected, the system keeps the air/gas mixture constant at optimal values ​​over the whole modulation range of the delivered power (constant CO2 value). Thanks to the sophisticated ACC system, combustion adjusts itself, thus eliminating the need for any calibration and allowing the boiler to operate with different gas compositions. Particular attention is paid to CO emissions, through a self-diagnosis that intervenes on the burner before the emission threshold allowed by the legislation is exceeded. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION FOR THE OPERATION OF THE LPG BOILER IT IS NECESSARY TO CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Beretta MYNUTE E 32C Low NOx condensing boiler complete with flue gas kit 20164602 Methane or LPG Wi-Fi Optional - NEW Boiler code 20164602 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A XL load profile NOx emission class 6 Technical features Heating thermal capacity (max-min) kW 29.00-6.00 Nominal DHW heat input (max-min) kW 31.60-6.00 Expansion vessel capacity on membrane l8 DHW production at ΔT= 25°C / 30°C / 35°C l/min 18.1/15.1/12.9 Supply voltage V-Hz 230 - 50 IP X5D degree of protection DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 29 kgs MYNUTE E BERETTA PRESENTS MYNUTE E, THE NEW CONDENSING BOILER WHICH, COMBINING RELIABILITY AND COMFORT WITH INSTALLATION FLEXIBILITY, IS THE IDEAL CHOICE FOR REPLACING The new MYNUTE E range is divided into three models combined in 25 kW and 32 kW power, one of which is a 25 kW DIN version, to also allow the replacement of boilers with hydraulic standards other than Beretta. The linear and modern design, in line with the recent generation Beretta boilers, the compactness of the dimensions and the installation flexibility make MYNUTE E easy to integrate into any living environment, both inside homes and outdoors (in partially protected places) or built-in, using dedicated accessories. The good efficiency, which places the range in class A, the ease of use and maintenance, and the excellent comfort, both in heating and DHW, complete the profile of this product, which will be appreciated for its reliability and functionality, in perfect harmony with the MYNUTE Beretta tradition. MYNUTE E, RELIABILITY AND FLEXIBILITY FOR A WORRY-FREE REPLACEMENT FEATURES Aluminum condensing exchanger Modulation range 1:5 Low consumption modulating circulator (EEI ≤ 0.20), 6 m Low NOx emissions: CLASS 6 (UNI EN 15502) Availability of 25kw model also with sequence of DIN type hydraulic connections, ideal for replacing products with the same type of connections Installation flexibility: indoor, outdoor and recessed installation (in a partially protected place) The 25C and 25C DIN models are C10 approved. Smoke clapet (non-return valve) available as an accessory Click-fit flue connection: fast and safe, without the need for an external collar Antifreeze heater kit, hydraulic connections and external probe available as accessories IPX5D electrical protection degree “DOUBLE T” template supplied Compatible with hybrid connects for managing up to two system zones Compatible with air-propane gas (25C and 25C DIN models) and with LPG, through optional kits. For gas conversion, contact authorized Beretta Technical Assistance Centres Compatible with BeSmart WiFi comfort control as thermostat (OTBus communication), allowing the most advanced functions Possibility of intubating flues with the special flue in PP ø50, ø60 and ø80 Polyphosphate dosing filter and compact magnetic filter available as accessories Hybrid Ready: Mynute E can be integrated into Beretta multi-energy systems through the Rec 10H Hybrid and the Connect Hybrids, available as accessories CONNECTIVITY WITH BeSMART (wi-fi optional) MYNUTE E is equipped with a control panel that stands out for its ease of use. Through a modern backlit LCD display, which communicates with the user through icons and scrolling texts (multilingual), it is possible to access the MYNUTE E functions. Through 7 silk-screened operating keys, it is possible to navigate the panel in a simple and intuitive way, accessing to the settings and parameterizations of the boiler and the system. MYNUTE E FUNCTIONS MANAGEMENT OF UP TO 2 HYDRAULIC CIRCUITS HIGH AND/OR LOW TEMPERATURE, THROUGH SPECIFIC ACCESSORIES PREHEAT PREHEATING ACTIVATION TO REDUCE DOMESTIC HOT WATER WAITING TIMES Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta MYNUTE X 30C Low NOx condensing boiler complete with flue gas kit 20163565 Methane - NEW Boiler code 20163565 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Declared load profile XL NOx emission class 6 HEATING EXERCISE Heating thermal capacity (max-min) kW 25.00-4.90 Maximum pressure-temperature bar-°C 3 - 90 Expansion tank capacity l 9 HEALTHCARE EXERCISE Nominal DHW heat input (max-min) kW 30.00-4.90 DHW energy efficiency ηwh % 85 DHW production at ∆T= 25°C / 30°C / 35°C l/min 17.2/14.3/12.3 CONNECTIONS Heating inlet - outlet Ø 3/4” DHW inlet - outlet Ø 1/2” Gas inlet Ø 3/4” DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 35 kgs MYNUTE X BERETTA PRESENTS MYNUTE X, THE NEW RANGE OF CONDENSING BOILERS, WITH MANY INNOVATIVE AND ADVANTAGEOUS FEATURES From the primary exchanger in stainless steel to the modern electronic interface, there are numerous new elements that distinguish MYNUTE X in the Beretta offer. The new condensing range, with its 5 models from 20 to 35 kW, with "combined" and "heating only" versions, meets every need for residential comfort. High efficiency, low consumption and ease of installation make MYNUTE X the winning choice, both for new homes and for the replacement market. With MYNUTE X, the novelty of the project merges with Beretta's tradition of excellence, matured in almost half a century of experience in the home comfort sector. Its aesthetics, in line with the Beretta style of the latest generation products, easily integrates into any living context, thanks also to its compactness and installation flexibility. NEW DIGITAL INTERFACE MYNUTE X is equipped with a modern and user-friendly control panel, elegantly covered by a door that lets you glimpse the light of its "green gem", the LED light bar that signals its current operating status. Through a modern backlit LCD display, which communicates with the user through icons and scrolling texts (multilingual), it is possible to access the functions of MYNUTE X. Through 7 silk-screened operating keys, it is possible to navigate the panel in a simple and intuitive way, accessing to the settings and parameterizations of the boiler and the system. MYNUTE X FEATURES MANAGEMENT OF UP TO 2 HYDRAULIC CIRCUITS, HIGH AND/OR LOW TEMPERATURE, THROUGH SPECIFIC PREHEATING ACCESSORIES PREHEATING ACTIVATION TO REDUCE DOMESTIC HOT WATER WAITING TIMES CLOCK FUNCTION WEEKLY PROGRAMMING INTEGRATED IN THE DISPLAY POSSIBILITY OF CONNECTION WITH DOMESTIC HOT WATER TANK (R MODELS) Technology and benefits NEW PRIMARY EXCHANGER IN STAINLESS STEEL THE NEW MYNUTE X EXCHANGER IS MADE OF STAINLESS STEEL, WITH A HIGH SECTION SMOOTH PIPE TO OFFER THE BEST EFFICIENCY AND CLEANLINESS OVER TIME. In addition to the high resistance to the corrosive action of acid condensate, AISI 304 L stainless steel reduces the internal formation of oxides and other electrochemical phenomena typical of installation on old systems. The single wound coil geometry (hydraulic circuit in series) offers a constant flow rate in all sections of the exchanger and intrinsically limits clogging phenomena. Front access facilitates periodic maintenance and cleaning of the combustion chamber. INTEGRATED CLAP MYNUTE X is C10 * approved (formerly 3CEp approved), integrating the non-return valve (clapet) as standard on all models, which makes it "ready to install" in case of installations in pressurized collective flues, for which the non-return valve is a mandatory device. The non-return valve is a specific device which allows the combustion fumes to flow through the ducts in only one direction, i.e. from the burner to the flue gas outlet. Its function is therefore to prevent the fumes from returning to the combustion chamber, compromising the correct functioning of the boiler. This could happen for various reasons, for example in the event of overpressure in the duct of a collective flue system. The non-return valve is generally supplied as a specific optional kit, to be installed at the flue outlet of a boiler in the case of C10 type collective exhausts. In MYNUTE X the non-return valve is positioned inside the boiler (see detail), which translates into quick installation and cost reduction. HYBRID READY MYNUTE X is a HYBRID READY solution. The boiler was born within the offer of HYBRID READY products, which make up the new hybrid technology system conceived and developed in the Beretta Research Laboratories. This system, created to meet the current and future integration and management needs of the various energy sources (Gas/Electricity/Renewables), also includes the most innovative methods of energy accumulation and distribution. Characteristics INNOVATIVE STAINLESS STEEL CONDENSING EXCHANGER WITH FRONT ACCESS WIDE MODULATION RANGE (UP TO 1:8) LOW CONSUMPTION MODULATING CIRCULATOR (EEI ≤ 0.20), 6 m EQUIPPED WITH STANDARD FUME CLAP (CHECK VALVE) AND C(10) APPROVED.* LOW POLLUTANT EMISSIONS: CLASS 6 (UNI EN 15502) MYNUTE X IS HYBRID READY: IT WAS BORN TO BE INTEGRATED IN BERETTA MULTI-ENERGY SYSTEMS THROUGH THE HYBRID REC 10H AND THE HYBRID CONNECTS, AVAILABLE AS ACCESSORIES INSTALLATION FLEXIBILITY: INDOOR, OUTDOOR** AND RECESSED*** INSTALLATION (IN A PARTIALLY PROTECTED PLACE) CLICK-FIT FLUE CONNECTION: FAST AND SAFE, WITHOUT THE NEED OF AN EXTERNAL COLLAR ANTIFREEZE RESISTANCE KIT, HYDRAULIC CONNECTIONS AND EXTERNAL PROBE AVAILABLE AS ACCESSORIES ELECTRICAL PROTECTION DEGREE IPX5D SUPPLIED "DOUBLE T" TEMPLATE COMPATIBLE WITH HYBRID CONNECTORS FOR THE MANAGEMENT OF UP TO TWO SYSTEM ZONES FOR GAS CONVERTING, PLEASE CONTACT AUTHORIZED BERETTA TECHNICAL ASSISTANCE CENTERS COMPATIBLE WITH BeSMART WIFI COMFORT CONTROL AS THERMOSTAT (OTBUS COMMUNICATION), ALLOWING THE MOST ADVANCED FUNCTIONS POSSIBILITY OF INTUBATING FLUES WITH THE SPECIFIC FLUE IN PP Ø60 AND Ø50 Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less