Caldaia Baxi a condensazione NUOVA PRIME 30 completa di Kit Scarico Fumi Metano o Gpl Wi-Fi OPTIONalAL Modello: Prime 30; Tipologia: Condensazione; Installazione: Consigliata per interni; Classe energetica in riascaldamento ErP: A; Classe energetica in produzione di ACS ErP: A; Profilo di carico: XL; Alimentazione: Metano o Natural Gas (G20/G21); Caldaie funzionanti a metano trasformabili a GPL e ad aria propanata mediante apposita regolazione (kit di trasformazione non necessario) Performance : Portata termica nominale sanitario kW 31 Portata termica nominale riscaldamento kW 24,7 Potenza termica nominale sanitario kW 30 Efficienza energetica stagionale del riscaldamento d’ambiente ŋs % 93 Temperatura minima di funzionamento °C -5 Capacità vaso espansione riscaldamento l 7 Regolazione temperatura acqua circuito riscaldamento °C 25-80 Portata minima acqua circuito sanitario l/min 2 Pressione minima acqua circuito riscaldamento bar 0,5 Pressione massima acqua circuito sanitario bar 8 Dimensioni: Dimensioni (h x l x p) mm 700x395x279 Tipo di Gas Metano/GPL/Aria propanata  Caldaie funzionanti a metano trasformabili a GPL e ad aria propanata mediante apposita regolazione (kit di trasformazione non necessario) NUOVA PRIME Ideale per la sostituzione di caldaie convenzionali. La gamma di caldaie a condensazione Prime si articola in due modelli, 26 e 30 kW per riscaldamento e produzione istantanea acqua calda sanitaria. Prime è stata progettata rispettando i requisiti delle Direttive Ecodesign e Labelling. Il regolamento sull’etichettatura (Regolamento UE 2017/1369) richiede di etichettare i prodotti secondo una scala energetica decrescente che va dalla A++ alla G e che passerà dalla A+++ alla F dal 26/09/2019. La classe energetica, identificata da una lettera, esprime un intervallo di valori di efficienza entro il quale risiede quello espresso dal prodotto in esame. L’etichetta nasce per consentire al consumatore finale, fornendo dati veri e comparabili, di fare scelte consapevoli indirizzandosi su prodotti ad alta efficienza. I vantaggi della caldaia a condensazione Prime Facile utilizzo grazie al pannello di controllo dotato di manopole e display LCD retroilluminato Facile installazione grazie alle dimensioni ultracompatte (700x395x279 mm - incluse manopole) e al peso contenuto (26 kg) Facile sostituzione di caldaie convenzionali grazie allo scarico fumi centrale Campo di modulazione 1:5 maggiore efficienza e silenziosità Predisposizione per abbinamento con il sistema solare integrato Baxi Scarico sdoppiato Ø 80 di serie Allacciamento a tubo di scarico Ø 50 mm rigido e flessibile: soluzione per risanamento canne fumarie - per il mod. 26 kw lunghezza totale (scarico + aspirazione) 35 metri Allacciamento a canne fumarie collettive in pressione Caldaie funzionanti a metano trasformabili a GPL e ad aria propanata mediante apposita regolazione (kit di trasformazione non necessario) Sistema idraulico Valvola deviatrice a tre vie elettrica Bruciatore a premiscelazione in acciaio inox Scambiatore acqua/fumi in acciaio inox Scambiatore sanitario in acciao inox Ventilatore modulante a variazione elettronica di velocità By-pass automatico Pompa di circolazione ad alta efficienza Sistema antibloccaggio pompa e valvola a tre vie che interviene ogni 24 ore Valvola di sicurezza circuito riscaldamento a 3 bar Vaso espansione da 7 litri Sistema di termoregolazione Predisposizione per il collegamento ad un impianto a zone Abbinamento a termostato/cronotermostato modulante Sistema di controllo Termostato di sicurezza contro le sovratemperature dello scambiatore acqua/fumi Pressostato idraulico che blocca il gas in caso di mancanza d’acqua Sonda NTC di sicurezza contro le sovratemperature dei fumi Controllo temperature mediante sonde NTC Dispositivo antigelo totale Termometro elettronico Manometro circuito riscaldamento Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Baxi condensing boiler mod. EVOlution Prime 30 kW Methane or LPG Complete with fume exhaust kit - ErP Model: EVOlution Prime 30; Typology: Condensation; Installation: Recommended for replacing conventional boilers Performance: DHW nominal heat input kW 31 Heating nominal heat input kW 24.7 Useful thermal power at 30% pot. term. name and low temp.** P1 kW 8 XL load profile Seasonal space heating energy efficiency class A Water heating energy efficiency class A Emissions of nitrogen oxides NOx mg/kWh 40 Minimum operating temperature °C -5 Heating expansion vessel capacity l 8 Heating circuit water temperature adjustment °C 25-80 Sanitary water temperature adjustment °C 35-60 Sanitary water production ΔT 25°C(1) l/min 16.1 DHW circuit minimum water flow rate l/min 2 Minimum heating circuit water pressure 0.5 bar Degree of protection IPX5D Dimensions: Dimensions (hxlxp) mm 700x395x279 EVOlution PRIME Wall mounted condensing gas boilers ideal for replacing conventional boilers The new range of EVOlution PRIME condensing boilers has been equipped with an innovative Baxi patented exchanger. Single Ø 28 mm self-cleaning stainless steel coil, with wide passages. Significant reduction of load losses Greater thermal efficiency Reduction of any deposits and therefore less risk of clogging Ease of maintenance The range of EVOlution PRIME condensing boilers is divided into three models, 26 and 30 kW for heating and instantaneous domestic hot water production: the 26 Mago model is equipped with the Baxi Mago SERIES, while it remains an accessory for the other two models. EVOlution PRIME has been designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling regulation (EU Regulation 2017/1369) requires the labeling of products according to a decreasing energy scale that goes from A++ to G and which will pass from A+++ to F from 09/26/2019. The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created to allow the final consumer, by providing true and comparable data, to make informed choices by targeting high-efficiency products. EVOlution PRIME 26 Mago: the advantages with the STANDARD Baxi Mago The EVOlution PRIME 26 Mago boiler is STANDARD equipped with the Baxi Mago, the modulating chronothermostat with integrated Wi-Fi designed to simplify the life of installers, assistance centers and end users, as it allows you to manage domestic comfort directly from an App, via the wifi connection. The advantages of the EVOlution PRIME condensing boiler Easy to install The ultra-compact dimensions 700x395x279 mm and the weight of just 26 kg reduce installation time. The EVOlution PRIME has the same center distances of the hydraulic connections of the conventional BAXI boilers to be replaced. Front access to the electrical connection also speeds up connection times. Lower energy consumption Thanks to the condensing technology, the high efficiency pump and the series of modulating room thermostats available as an accessory. Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue outlet and the separate adjustable outlet supplied as standard. The coaxial exhaust Ø 60/100 is available as an accessory that can be combined with a pipe extension and a 90° bend diameter 60/100 (adjustable by 360°).Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue exhaust and the separate adjustable exhaust supplied as standard. The Ø 60/100 coaxial outlet is available as an accessory that can be combined with a pipe extension and a 60/100 diameter 90° bend (360° adjustable). The lower closure kit allows the boiler to adapt to any environment, reducing the visual impact and inserting itself in all the replacement installation contexts. The spacer frame allows the boiler to be moved away from the wall by 40 mm, allowing the passage of the pipes in the rear part of the back panel. This accessory facilitates the replacement of the boiler by eliminating the masonry work. New Baxi patented exchanger with single coil in stainless steel with large water passage sections 8-litre oversized heating expansion vessel Easy to use thanks to the control panel equipped with knobs and backlit LCD display Easy installation thanks to the ultra-compact dimensions (700x395x279 mm - including knobs) and low weight (26 kg) Easy replacement of conventional boilers thanks to central flue gas outlet Modulation range 1:5 greater efficiency and silence Arrangement for combination with the Baxi integrated solar system Ø 80 double drain STANDARD Connection to rigid and flexible Ø 50 mm exhaust pipe: solution for restoring flues - total length (exhaust + intake) 35 meters Connection to pressurized collective flues Boilers running on methane that can be converted to LPG and propane by means of a specific regulation (conversion kit not necessary) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Easy to use thanks to the control panel equipped with knobs and backlit LCD display • Easy installation thanks to ultra-compact dimensions (700x395x279 mm – including knobs) and low weight (26 kg) • Easy replacement of conventional boilers thanks to central flue gas outlet • Modulation range 1:5 greater efficiency and silence • High efficiency circulation pump • Arrangement for combination with the Baxi integrated solar system • Ø 80 double exhaust as standard • Connection to rigid and flexible Ø 50 mm exhaust pipe: solutions for restoring flues, total length (exhaust + suction) 40 meters • Connection to pressurized collective flues • Boilers running on methane that can be converted to LPG and propane air by means of a specific regulation (conversion kit not necessary ) TECHNICAL FEATURES – Installation type: B23-B23P-B33-C13-C33-C43-C53-C63-C83-C93 – DHW nominal heat input: 20.9 kW – Sanitary nominal thermal power: 30 kW – Nominal heating heat input: 24.7 kW – Heating rated thermal power 80/60°C: 24 kW – Heating rated thermal power 50/30°C: 26.1 kW – Reduced thermal power 80/60°C : 5.6 kW – Reduced thermal power 50/30°C: 6 kW – Efficiency at 30%: 105.8% – Nominal efficiency 80/60°C: 97.5% – Nominal efficiency 50/30°C: 105.8% – Seasonal space heating energy efficiency class: A – Seasonal energy efficiency class of the sanitary fixture: A – Water heating – Load profile: XL – NOx class 5 – Domestic hot water production: ∆T 25°C: 13.8 l/min – Category II2HM3B/P appliance operating on gas type G20 – G230 – G30 – G31 – Electronic ignition with flame ionization control – Degree of protection: IPX5D – Primary water/gas coil exchanger in AISI 316L stainless steel – Secondary water/water exchanger in stainless steel – Electric 3-way diverter valve – Modulating fan with electronic speed variation – Automatic by-pass on the heating circuit – Digital and analog pressure gauge on the heating circuit – Heating expansion tank with capacity 7 l and preload 0.8 bar – High efficiency ErP full modulation circulation pump with built-in deaerator – Hall effect DHW flowmeter for detecting hot water withdrawal – DHW operation with minimum water pressure of 0.15 bar and minimum flow rate of 2 l/min. – Inspectable filter on loading water inlet – Primary circuit safety valve at 3 bar – Heating water temperature adjustment range: 25÷80°C – Domestic water temperature adjustment range (in the case of combination with a boiler): 35÷60°C – Minimum operating temperature: – 5°C – Dimensions hxwxd: 700 x 395 x 279 mm – Weight 26kg CONTROL SYSTEM – Temperature control using NTC probes – Pump post-circulation in heating function – Safety thermostat against overheating of the water/fumes exchanger – Hydraulic pressure switch which blocks the gas in case of water shortage – Pump electronic control blocked – Pump anti-blocking system and 3-way valve which intervenes every 24 hours – NTC safety probe against fume overheating – Total antifreeze device which intervenes with temperatures below 5°C – Electronic thermometer – Display of heating circuit pressure on control panel   THE ADVANTAGES OF PRIME EASY TO INSTALL The ultra-compact dimensions 700x395x279 mm and the weight of just 26 kg reduce installation time. The new Prime has the same distance between centers of the hydraulic connections of the conventional BAXI boilers to be replaced. Front access to the electrical connection also speeds up connection times. The fixing bracket supplied as standard and the visible hooks facilitate wall mounting.       LOWER ENERGY CONSUMPTION Thanks to the condensing technology, the high efficiency pump and the series of modulating room thermostats available as an accessory. The new regulation 7129-3:2015 prescribes the possibility of creating collective flues in positive pressure only for type C condensing appliances. It is possible to connect to a collective flue in positive pressure only appliances declared suitable by the manufacturer for this application and equipped with a non-return device (clapet), designed to prevent the combustion products from flowing out through appliances connected and temporarily switched off; the smoke non-return valve is an integral part of the appliance.         THE REGULATION 7129-3:2015 Regulation 7129-3:2015 prescribes the possibility of creating collective flues in positive pressure only for type C condensing appliances. Only devices declared suitable can be connected to a positive pressure collective flue by the manufacturer for this application and equipped with a non-return device (clapet), designed to prevent the products from combustion to flow through appliances connected and momentarily switched off; the smoke non-return valve is part component of the appliance.     CLAPET (SMOKE NON-RETURN VALVE) Included in the duct downstream of the air-gas group fan.           CONNECTED TO COLLECTIVE PRESSURIZED FLUES Thanks to the integrated flue non-return valve (clapet), Prime is designed for connection to pressurized collective flues.                           SMOKE PIPES Ø50 MM Possibility of restoring flues with Ø50 mm exhaust hose (up to 40m of exhaust)     FLEXIBILITY IN THE REPLACEMENT Easy replacement of old standard boilers, thanks to the central flue outlet and the separate adjustable outlet supplied as standard.   The Ø 60/100 coaxial drain is available as an accessory that can be combined with a pipe extension and a 60/100 diameter 90° elbow (360° adjustable).   To facilitate replacement in installations where space is limited (flue gas outlet at the rear of the boiler), the new accessory is available with a lowered coaxial 90° bend.   For more information, download the following documentation: PRIME 24 TECHNICAL DRAWINGS     NEW COMBUSTION GROUP The Prime combines the performance of the stainless steel exchanger with the advantages of a new generation burner integrated with an innovative cold closing door.       The new cylindrical burner ensures greater thermal and acoustic comfort, and reduced NOx and CO emissions thanks to greater flame stability. The new cold door reduces losses by 75% with surface temperatures below 20°C, guaranteeing significant savings in stand-by and during operation, speeding up maintenance, as there is no need to wait let it cool down.

Read more less